This is a fix for PR28697.
An MDNode can indirectly refer to a GlobalValue, through a
ConstantAsMetadata. When the GlobalValue is deleted, the MDNode operand
is reset to `nullptr`. If the node is uniqued, this can lead to a
hard-to-detect cache invalidation in a Metadata map that's shared across
an LLVMContext.
Consider:
1. A map from Metadata* to `T` called RemappedMDs.
2. A node that references a global variable, `!{i1* @GV}`.
3. Insert `!{i1* @GV} -> SomeT` in the map.
4. Delete `@GV`, leaving behind `!{null} -> SomeT`.
Looking up the generic and uninteresting `!{null}` gives you `SomeT`,
which is likely related to `@GV`. Worse, `SomeT`'s lifetime may be tied
to the deleted `@GV`.
This occurs in practice in the shared ValueMap used since r266579 in the
IRMover. Other code that handles more than one Module (with different
lifetimes) in the same LLVMContext could hit it too.
The fix here is a partial revert of r225223: in the rare case that an
MDNode operand is a ConstantAsMetadata (i.e., wrapping a node from the
Value hierarchy), drop uniquing if it gets replaced with `nullptr`.
This changes step #4 above to leave behind `distinct !{null} -> SomeT`,
which can't be confused with the generic `!{null}`.
In theory, this can cause some churn in the LLVMContext's MDNode
uniquing map when Values are being deleted. However:
- The number of GlobalValues referenced from uniqued MDNodes is
expected to be quite small. E.g., the debug info metadata schema
only references GlobalValues from distinct nodes.
- Other Constants have the lifetime of the LLVMContext, whose teardown
is careful to drop references before deleting the constants.
As a result, I don't expect a compile time regression from this change.
llvm-svn: 277625
This fixes pr28072.
The point, as Duncan pointed out, is that the file is already
partially linked by just reading it.
Long term I think the solution is to make metadata owned by the module
and then the linker will lazily read it and be in charge of all the
linking. Running a verifier in each input will defeat the lazy
loading, but will be legal.
Right now we are at the unfortunate position that to support odr
merging we cannot verify the inputs, which mildly annoying (see test
update).
llvm-svn: 274148
Summary:
When RF_NullMapMissingGlobalValues is set, mapValue can return null
for GlobalValue. When mapping the operands of a constant that is
referenced from metadata, we need to handle this case and actually
return null instead of mapping this constant.
Reviewers: dexonsmith, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20713
llvm-svn: 271129
This will be needed in order to consistently return an Error
to clients of the API being developed in D20268.
Differential Revision: http://reviews.llvm.org/D20550
llvm-svn: 270967
This test was hitting an assertion in the value mapper because
the IRLinker was trying to map two times @A while materializing
the initializer for @C.
Fix http://llvm.org/PR27850
Differential Revision: http://reviews.llvm.org/D20586
llvm-svn: 270757
An oddity of the .ll syntax is that the "@var = " in
@var = global i32 42
is optional. Writing just
global i32 42
is equivalent to
@0 = global i32 42
This means that there is a pretty big First set at the top level. The
current implementation maintains it manually. I was trying to refactor
it, but then started wondering why keep it a all. I personally find the
above syntax confusing. It looks like something is missing.
This patch removes the feature and simplifies the parser.
llvm-svn: 269096
Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.
Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.
This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.
The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html
llvm-svn: 267296
Summary:
The function importer already decided what symbols need to be pulled
in. Also these magically added ones will not be in the export list
for the source module, which can confuse the internalizer for
instance.
Reviewers: tejohnson, rafael
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19096
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266948
This linkage is *not* intended to express that a declaration refers
to a weak symbol, but that the symbol might not be present at link
time. I don't believe it was the intent.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266856
Add a new method, DICompositeType::buildODRType, that will create or
mutate the DICompositeType for a given ODR identifier, and use it in
LLParser and BitcodeReader instead of DICompositeType::getODRType.
The logic is as follows:
- If there's no node, create one with the given arguments.
- Else, if the current node is a forward declaration and the new
arguments would create a definition, mutate the node to match the
new arguments.
- Else, return the old node.
This adds a missing feature supported by the current DITypeIdentifierMap
(which I'm slowly making redudant). The only remaining difference is
that the DITypeIdentifierMap has a "the-last-one-wins" rule, whereas
DICompositeType::buildODRType has a "the-first-one-wins" rule.
For now I'm leaving behind DICompositeType::getODRType since it has
obvious, low-level semantics that are convenient for unit testing.
llvm-svn: 266786
Simplify the test logic a little, sharing logic between the two linking
directions by specifying -check-prefix multiple times. Now it's more
obvious what's hte same and different between the two directions, and
there is less CHECK duplication. This is a prep for expanding the test.
llvm-svn: 266773
Summary:
There is no reason to have a weak reference because the external
definition will be weak.
Reviewers: rafael
Subscribers: llvm-commits, tejohnson
Differential Revision: http://reviews.llvm.org/D19267
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266750
Lift the API for debug info ODR type uniquing up a layer. Instead of
clients managing the map directly on the LLVMContext, add a static
method to DICompositeType called getODRType and handle the map in the
background. Also adds DICompositeType::getODRTypeIfExists, so far just
for convenience in the unit tests.
This simplifies the logic in LLParser and BitcodeReader. Because of
argument spam there are actually a few more lines of code now; I'll see
if I come up with a reasonable way to clean that up.
llvm-svn: 266742
When we suppress linkage names, for a non-inlined subprogram the name
can still be found in the object-file symbol table, because we have
the code address of the subprogram. This is not necessarily the case
for an inlined subprogram, so we still want to emit the linkage name
in the DWARF. Put this on the abstract-origin DIE because it's common
to all inlined instances.
Differential Revision: http://reviews.llvm.org/D18706
llvm-svn: 266692
Rather than relying on the structural equivalence of DICompositeType to
merge type definitions, use an explicit map on the LLVMContext that
LLParser and BitcodeReader consult when constructing new nodes.
Each non-forward-declaration DICompositeType with a non-empty
'identifier:' field is stored/loaded from the type map, and the first
definiton will "win".
This map is opt-in: clients that expect ODR types from different modules
to be merged must call LLVMContext::ensureDITypeMap.
- Clients that just happen to load more than one Module in the same
LLVMContext won't magically merge types.
- Clients (like LTO) that want to continue to merge types based on ODR
identifiers should opt-in immediately.
I have updated LTOCodeGenerator.cpp, the two "linking" spots in
gold-plugin.cpp, and llvm-link (unless -disable-debug-info-type-map) to
set this.
With this in place, it will be straightforward to remove the DITypeRef
concept (i.e., referencing types by their 'identifier:' string rather
than pointing at them directly).
llvm-svn: 266549
Merge members that are describing the same member of the same ODR type,
even if other bits differ. If the file or line differ, we don't care;
if anything else differs, it's an ODR violation (and we still don't
really care).
For DISubprogram declarations, this looks at the LinkageName and Scope.
For DW_TAG_member instances of DIDerivedType, this looks at the Name and
Scope. In both cases, we know that the Scope follows ODR rules if it
has a non-empty identifier.
llvm-svn: 266548
Split up the long RUN and clarify the CHECK lines:
- Explicitly confirm there are no other subprograms inside of "A".
- Remove checks for "bar" and "baz", which were just implicitly
checking that there were no other subprograms inside of "A".
This prepares for adding a RUN line which links the two files in the
opposite direction.
llvm-svn: 266543
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
Summary:
Let keep llvm-as "dumb": it converts textual IR to bitcode. This
commit removes the dependency from llvm-as to libLLVMAnalysis.
We'll add back summary in llvm-as if we get to a textual
representation for it at some point. In the meantime, opt seems
like a better place for that.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19032
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266131
This is more robust to changes in the link ordering.
Differential Revision: http://reviews.llvm.org/D18946
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266018
This mostly cosmetic patch moves the DebugEmissionKind enum from DIBuilder
into DICompileUnit. DIBuilder is not the right place for this enum to live
in — a metadata consumer should not have to include DIBuilder.h.
I also added a Verifier check that checks that the emission kind of a
DICompileUnit is actually legal.
http://reviews.llvm.org/D18612
<rdar://problem/25427165>
llvm-svn: 265077
After comdat processing, the symbols still go through regular symbol
resolution.
We were not doing it for linkonce symbols since they are lazy linked.
This fixes pr27044.
llvm-svn: 264288
If not for lazy linking of linkonce GVs, comdats are just a
preprocessing before symbol resolution.
Lazy linking complicates it since when we pick a visible member of
comdat, we have to make sure the rest of it passes symbol resolution
too.
llvm-svn: 264223
If a comdat is dropped, all symbols in it are dropped.
If a comdat is kept, the symbols survive to pass regular symbol
resolution.
With this patch we do that for all global symbols.
The added test is a copy of test/tools/gold/X86/comdat.ll that we now
pass.
llvm-svn: 264192
A really unfortunate design of llvm-link and related libraries is that
they operate one module at a time.
This means they can copy a GV to the destination module that should not
be there in the final result because a later bitcode file takes
precedence.
We already handled cases like a strong GV replacing a weak for example.
One case that is not currently handled is a comdat replacing another.
This doesn't happen in ELF, but with COFF largest selection kind it is
possible.
In "llvm-link a.ll b.ll" if the selected comdat was from a.ll,
everything will work and we will not copy the comdat from b.ll.
But if we run "llvm-link b.ll a.ll", we fail to delete the already
copied comdat from b.ll. This patch fixes that.
llvm-svn: 264103
Summary:
ThinLTO is relying on linkInModule to import selected function.
However a lot of "magic" was hidden in linkInModule and the IRMover,
who would rename and promote global variables on the fly.
This is moving to an approach where the steps are decoupled and the
client is reponsible to specify the list of globals to import.
As a consequence some test are changed because they were relying on
the previous behavior which was importing the definition of *every*
single global without control on the client side.
Now the burden is on the client to decide if a global has to be imported
or not.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18122
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263863
(Resubmitting after fixing missing file issue)
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263513
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263490
Summary:
Available externally definitions are considered declarations for the
linker and eventually dropped. As such they are not allowed to be
in comdats. Remove any such imported functions from comdats.
Reviewers: rafael
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D16120
llvm-svn: 260122
For metadata postpass linking, after importing all functions, we need
to recursively walk through any nodes reached via imported functions to
locate needed subprogram metadata. Some might only be reached indirectly
via the variable list for an inlined function.
llvm-svn: 258728
Fix the condition for when the new global takes over the name of
the existing one to be the negation of the condition for the new
global to get internal linkage.
llvm-svn: 258355
I originally reapplied this in 257550, but had to revert again due to bot
breakage. The only change in this version is to allow either the TypeSize
or the TypeAllocSize of the variable to be the one represented in debug info
(hopefully in the future we can figure out how to encode the difference).
Additionally, several bot failures following r257550, were due to
optimizer bugs now fixed in r257787 and r257795.
r257550 commit message was:
```
The follow extra changes were made to test cases:
Manually making the variable be the actual type instead of a pointer
to avoid pointer-size differences in generic code:
LLVM :: DebugInfo/Generic/2010-03-24-MemberFn.ll
LLVM :: DebugInfo/Generic/2010-04-06-NestedFnDbgInfo.ll
LLVM :: DebugInfo/Generic/2010-05-03-DisableFramePtr.ll
LLVM :: DebugInfo/Generic/varargs.ll
Delete sizing information from debug info for the same reason
(but the presence of the pointer was important to the test case):
LLVM :: DebugInfo/Generic/restrict.ll
LLVM :: DebugInfo/Generic/tu-composite.ll
LLVM :: Linker/type-unique-type-array-a.ll
LLVM :: Linker/type-unique-simple2.ll
Fixing an incorrect DW_OP_deref
LLVM :: DebugInfo/Generic/2010-05-03-OriginDIE.ll
Fixing a missing DW_OP_deref
LLVM :: DebugInfo/Generic/incorrect-variable-debugloc.ll
Additionally, clang should no longer complain during bootstrap should no
longer happen after r257534.
The original commit message was:
``
Summary:
Teach the Verifier to make sure that the storage size given to llvm.dbg.declare
or the value size given to llvm.dbg.value agree with what is declared in
DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA).
Additionally this catches a number of common mistakes, such as passing a
pointer when a value was intended or vice versa.
One complication comes from stack coloring which modifies the original IR when
it merges allocas in order to make sure that if AA falls back to the IR it gets
the correct result. However, given this new invariant, indiscriminately
replacing one alloca by a different (differently sized one) is no longer valid.
Fix this by just undefing out any use of the alloca in a dbg.declare in this
case.
Additionally, I had to fix a number of test cases. Of particular note:
- I regenerated dbg-changes-codegen-branch-folding.ll from the given source as
it was affected by the bug fixed in r256077
- two-cus-from-same-file.ll was changed to avoid having a variable-typed debug
variable as that would depend on the target, even though this test is
supposed to be generic
- I had to manually declared size/align for reference type. See also the
discussion for D14275/r253186.
- fpstack-debuginstr-kill.ll required changing `double` to `long double`
- most others were just a question of adding OP_deref
``
```
llvm-svn: 257850
The follow extra changes were made to test cases:
Manually making the variable be the actual type instead of a pointer
to avoid pointer-size differences in generic code:
LLVM :: DebugInfo/Generic/2010-03-24-MemberFn.ll
LLVM :: DebugInfo/Generic/2010-04-06-NestedFnDbgInfo.ll
LLVM :: DebugInfo/Generic/2010-05-03-DisableFramePtr.ll
LLVM :: DebugInfo/Generic/varargs.ll
Delete sizing information from debug info for the same reason
(but the presence of the pointer was important to the test case):
LLVM :: DebugInfo/Generic/restrict.ll
LLVM :: DebugInfo/Generic/tu-composite.ll
LLVM :: Linker/type-unique-type-array-a.ll
LLVM :: Linker/type-unique-simple2.ll
Fixing an incorrect DW_OP_deref
LLVM :: DebugInfo/Generic/2010-05-03-OriginDIE.ll
Fixing a missing DW_OP_deref
LLVM :: DebugInfo/Generic/incorrect-variable-debugloc.ll
Additionally, clang should no longer complain during bootstrap should no
longer happen after r257534.
The original commit message was:
```
Summary:
Teach the Verifier to make sure that the storage size given to llvm.dbg.declare
or the value size given to llvm.dbg.value agree with what is declared in
DebugInfo. This is implicitly assumed in a number of passes (e.g. in SROA).
Additionally this catches a number of common mistakes, such as passing a
pointer when a value was intended or vice versa.
One complication comes from stack coloring which modifies the original IR when
it merges allocas in order to make sure that if AA falls back to the IR it gets
the correct result. However, given this new invariant, indiscriminately
replacing one alloca by a different (differently sized one) is no longer valid.
Fix this by just undefing out any use of the alloca in a dbg.declare in this
case.
Additionally, I had to fix a number of test cases. Of particular note:
- I regenerated dbg-changes-codegen-branch-folding.ll from the given source as
it was affected by the bug fixed in r256077
- two-cus-from-same-file.ll was changed to avoid having a variable-typed debug
variable as that would depend on the target, even though this test is
supposed to be generic
- I had to manually declared size/align for reference type. See also the
discussion for D14275/r253186.
- fpstack-debuginstr-kill.ll required changing `double` to `long double`
- most others were just a question of adding OP_deref
```
llvm-svn: 257550
Follow-up to r257000: DIImportedEntity can reach a DISubprogram via
its entity, but also via its scope. Handle the latter case as well.
PR26037.
llvm-svn: 257019
It is illegal to have a null entity in a DIImportedEntity, so
we must link in a DISubprogram metadata node referenced by one,
even if the associated function is not linked in or inlined anywhere.
Fixes PR26037.
llvm-svn: 257000
Summary:
Third patch split out from http://reviews.llvm.org/D14752.
Only map in needed DISubroutine metadata (imported or otherwise linked
in functions and other DISubroutine referenced by inlined instructions).
This is supported for ThinLTO, LTO and llvm-link --only-needed, with
associated tests for each one.
Depends on D14838.
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14843
llvm-svn: 256003
Summary:
Second patch split out from http://reviews.llvm.org/D14752.
Maps metadata as a post-pass from each module when importing complete,
suturing up final metadata to the temporary metadata left on the
imported instructions.
This entails saving the mapping from bitcode value id to temporary
metadata in the importing pass, and from bitcode value id to final
metadata during the metadata linking postpass.
Depends on D14825.
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14838
llvm-svn: 255909
This patch converts code that has access to a LLVMContext to not take a
diagnostic handler.
This has a few advantages
* It is easier to use a consistent diagnostic handler in a single program.
* Less clutter since we are not passing a handler around.
It does make it a bit awkward to implement some C APIs that return a
diagnostic string. I will propose new versions of these APIs and
deprecate the current ones.
llvm-svn: 255571
A linker normally has two stages: symbol resolution and "moving stuff".
In lib/Linker there is the complication of lazy linking some globals,
but it was still far more mixed than it needed to.
This splits the linker into a lower level IRMover and the linker proper.
The IRMover just takes a list of globals to move and a callback that
lets the user control what is lazy linked.
The main motivation is that now tools/gold (and soon lld) can use their
own symbol resolution to instruct IRMover what to do.
llvm-svn: 255254
Now instead of changing it to the new format and then linking, it just
handles the old format while copying it over.
The main differences are:
* There is no rauw in the source module.
* An old format input is always upgraded.
The first item helps with having a sane API that passes in a GV list to
the linker.
The second one is a small step in deprecating the old format.
llvm-svn: 254907
Summary:
Fix import from module with appending var, which cannot be imported. The
first fix is to remove an overly-aggressive error check.
The second fix is to deal with restructuring introduced to the module
linker yesterday in r254418 (actually, this fix was included already
in r254559, just added some additional cleanup).
Test by Mehdi Amini.
Reviewers: joker.eph, rafael
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D15156
llvm-svn: 254624
This replaces DoNotLinkFromSource with ValuesToLink. It also moves the
computation of ValuesToLink earlier.
It is a bit simpler and an important step in slitting the linker into an
ir mover and a linker proper.
The test change is because we now avoid creating dead declarations.
llvm-svn: 254559
Having to import an alias as declaration is not thinlto specific.
The test difference are because when we already have a decl and we are
not importing it, we just leave the decl alone.
llvm-svn: 254556
The difference is that now we don't error on out-of-comdat access to
internal global values. We copy them instead. This seems to match the
expectation of COFF linkers (see pr25686).
Original message:
Start deciding earlier what to link.
A traditional linker is roughly split in symbol resolution and
"copying
stuff".
The two tasks are badly mixed in lib/Linker.
This starts splitting them apart.
With this patch there are no direct call to linkGlobalValueBody or
linkGlobalValueProto. Everything is linked via WapValue.
This also includes a few fixes:
* A GV goes undefined if the comdat is dropped (comdat11.ll).
* We error if an internal GV goes undefined (comdat13.ll).
* We don't link an unused comdat.
The first two match the behavior of an ELF linker. The second one is
equivalent to running globaldce on the input.
llvm-svn: 254418
A traditional linker is roughly split in symbol resolution and "copying
stuff".
The two tasks are badly mixed in lib/Linker.
This starts splitting them apart.
With this patch there are no direct call to linkGlobalValueBody or
linkGlobalValueProto. Everything is linked via WapValue.
This also includes a few fixes:
* A GV goes undefined if the comdat is dropped (comdat11.ll).
* We error if an internal GV goes undefined (comdat13.ll).
* We don't link an unused comdat.
The first two match the behavior of an ELF linker. The second one is
equivalent to running globaldce on the input.
llvm-svn: 254336
They are as much trouble as aliases to declarations. They are requiring
the code generator to define a symbol with the same value as another
symbol, but the second symbol is undefined.
If representing this is important for some optimization, we could add
support for available_externally aliases. They would be *required* to
point to a declaration (or available_externally definition).
llvm-svn: 254170
We had two code paths. One would create names like "foo.1" and the other
names like "foo1".
For globals it is important to use "foo.1" to help C++ name demangling.
For locals there is no strong reason to go one way or the other so I
kept the most common mangling (foo1).
llvm-svn: 253804
Summary:
Several fixes to the handling of bitcode files without function summary
sections so that they are skipped during ThinLTO processing in llvm-lto
and the gold plugin when appropriate instead of aborting.
1 Don't assert when trying to add a FunctionInfo that doesn't have
a summary attached.
2 Skip FunctionInfo structures that don't have attached function summary
sections when trying to create the combined function summary.
3 In both llvm-lto and gold-plugin, check whether a bitcode file has
a function summary section before trying to parse the index, and skip
the bitcode file if it does not.
4 Fix hasFunctionSummaryInMemBuffer in BitcodeReader, which had a bug
where we returned to early while looking for the summary section.
Also added llvm-lto and gold-plugin based tests for cases where we
don't have function summaries in the bitcode file. I verified that
either the first couple fixes described above are enough to avoid the
crashes, or fixes 1,3,4. But have combined them all here for added
robustness.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14903
llvm-svn: 253796
Summary:
Add a -preserve-modules option to llvm-link that simulates LTO
clients that don't destroy modules as they are linked. This enables
reproduction of a recent bug introduced by a metadata linking change
that was only caught when the modules weren't destroyed before
writing bitcode (LTO on Windows).
See http://llvm.org/viewvc/llvm-project?view=revision&revision=253170
for more details on the original bug and the fix.
Confirmed the new test added here reproduces the failure using the new
option when I suppress the fix.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14818
llvm-svn: 253740
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
llvm-svn: 253511
Update the ThinLTO function importing test to use DAG forms of checks so
that it is more tolerant of changes to relative ordering between
imported decls/defs. This reduces the number of changes required by the
comdat importing patch I am sending for review shortly.
llvm-svn: 252932
Summary:
The module linker lazy links some "discardable if unused" global
values (e.g. linkonce), materializing and linking them only
if they are referenced in the module. If a comdat group contains a
linkonce member that is not referenced, however, it would not be
materialized and linked, leading to an incomplete comdat group.
If there are other object files not part of the same LTO link that also
define and use that comdat group, the linker may select the incomplete
group leading to link time unsats.
To solve this, whenever a global value body is linked, make sure we
materialize any other members of the same comdat group that are not yet
materialized. This ensures they are in the lazy link list and get linked
as well.
Added new test and adjusted old test to remove parts that didn't
make sense with fix.
Reviewers: rafael
Subscribers: dexonsmith, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14516
llvm-svn: 252647
Ensure WeakAny variables are imported as ExternalWeak declarations. To
handle WeakAny more consistently and fix this issue:
1) Update helper doImportAsDefinition to properly flag WeakAny variables
and aliases as not importing defintions.
Update callers of doImportAsDefinition to remove now redundant checks for
WeakAny aliases, or ignore aliases, as appropriate.
2) Add any !doImportAsDefinition GVs to DoNotLinkFromSource set during
linking of the GV prototype, where we usually add GVs to the
DoNotLinkFromSource set for other reasons.
Remove now unnecessary adding of WeakAny aliases to
DoNotLinkFromSource set from copyGlobalAliasProto.
Remove now unnecessary guard against linking non-imported function
bodies from ModuleLinker::run.
llvm-svn: 252626
Summary:
This reverts commit r251965.
Restore "Move metadata linking after lazy global materialization/linking."
This restores commit r251926, with fixes for the LTO bootstrapping bot
failure.
The bot failure was caused by references from debug metadata to
otherwise unreferenced globals. Previously, this caused the lazy linking
to link in their defs, which is unnecessary. With this patch, because
lazy linking is complete when we encounter the metadata reference, the
materializer created a declaration. For definitions such as aliases and
comdats, it is illegal to have a declaration. Furthermore, metadata
linking should not change code generation. Therefore, when linking of
global value bodies is complete, the materializer will simply return
nullptr as the new reference for the linked metadata.
This change required fixing a different test to ensure there was a
real reference to a linkonce global that was only being reference from
metadata.
Note that the new changes to the only-needed-named-metadata.ll test
illustrate an issue with llvm-link -only-needed handling of comdat
groups, whereby it may result in an incomplete comdat group. I note this
in the test comments, but the issue is orthogonal to this patch (it can
be reproduced without any metadata at head).
Reviewers: dexonsmith, rafael, tra
Subscribers: tobiasvk, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D14447
llvm-svn: 252320
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
llvm-svn: 252219
When converting an alias to a non-alias when the aliasee is not
imported, ensure that the linkage type is set to external so that it is
a valid linkage type. Added a test case that exposed this issue.
llvm-svn: 252054
This reverts commit r251926. I believe this is causing an LTO
bootstrapping bot failure
(http://lab.llvm.org:8080/green/job/llvm-stage2-cmake-RgLTO_build/3669/).
Haven't been able to repro it yet, but after looking at the metadata I
am pretty sure I know what is going on.
llvm-svn: 251965
Summary:
Currently, named metadata is linked before the LazilyLinkGlobalValues
list is walked and materialized/linked. As a result, references
from DISubprogram and DIGlobalVariable metadata to yet unmaterialized
functions and variables cause them to be added to the lazy linking
list and their definitions are materialized and linked.
This makes the llvm-link -only-needed option not have the intended
effect when debug information is present, as the otherwise unneeded
functions/variables are still linked in.
Additionally, for ThinLTO I have implemented a mechanism to only link
in debug metadata needed by imported functions. Moving named metadata
linking after lazy GV linking will facilitate applying this mechanism
to the LTO and "llvm-link -only-needed" cases as well.
Reviewers: dexonsmith, tra, dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14195
llvm-svn: 251926
This reverts commit r251837, due to a number of bot failures of the form:
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.obj/tools/llvm-link/Release+Asserts/llvm-link.o:llvm-link.cpp:function
loadIndex(llvm::LLVMContext&, llvm::Module const*): error: undefined
reference to
'llvm::object::FunctionIndexObjectFile::create(llvm::MemoryBufferRef,
llvm::LLVMContext&, llvm::Module const*, bool)'
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.obj/tools/llvm-link/Release+Asserts/llvm-link.o:llvm-link.cpp:function
loadIndex(llvm::LLVMContext&, llvm::Module const*): error: undefined
reference to 'llvm::object::FunctionIndexObjectFile::takeIndex()'
I'm not sure why these are happening - I added Object to the requred
libraries in tools/llvm-link/LLVMBuild.txt and the LLVM_LINK_COMPONENTS
in tools/llvm-link/CMakeLists.txt. Confirmed for my build that these
symbols come out of libLLVMObject.a. What am I missing?
llvm-svn: 251841
Summary:
Support for necessary linkage changes and symbol renaming during
ThinLTO function importing.
Also includes llvm-link support for manually importing functions
and associated llvm-link based tests.
Note that this does not include support for intelligently importing
metadata, which is currently imported duplicate times. That support will
be in the follow-on patch, and currently is ignored by the tests.
Reviewers: dexonsmith, joker.eph, davidxl
Subscribers: tobiasvk, tejohnson, llvm-commits
Differential Revision: http://reviews.llvm.org/D13515
llvm-svn: 251837
Summary:
I noticed when manually modifying this test that it was passing when I
expected it to fail. Looks like the combination of LABEL and NOT on the
check does not work. This can also be seen when running FileCheck with
only that one -check-prefix (removing the additional -check-prefix=B):
/usr/local/google/home/tejohnson/llvm/llvm_11_build/./bin/llvm-link -S -internalize -only-needed /usr/local/google/home/tejohnson/llvm/llvm_11_build/test/Linker/Output/link-flags.ll.tmp.b.bc /usr/local/google/home/tejohnson/llvm/llvm_11_build/test/Linker/Output/link-flags.ll.tmp.c.bc | /usr/local/google/home/tejohnson/llvm/llvm_11_build/./bin/FileCheck /usr/local/google/home/tejohnson/llvm/llvm_11/test/Linker/link-flags.ll -check-prefix=CN
error: no check strings found with prefix 'CN:'
The CN prefix checks don't in fact need "LABEL" so remove that.
Reviewers: tra
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14173
llvm-svn: 251655
When building LLVM as a (potentially dynamic) library that can be linked against
by multiple compilers, the default triple is not really meaningful.
We allow to explicitely set it to an empty string when configuring LLVM.
In this case, said "target independent" tests in the test suite that are using
the default triple are disabled by matching the newly available feature
"default_triple".
Reviewers: probinson, echristo
Differential Revision: http://reviews.llvm.org/D12660
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 247775
Duncan P. N. Exon Smith