Summary:
This patch does the following:
1. Make InitTargetOptionsFromCodeGenFlags() accepts Triple as a
parameter, because some options' default value is triple dependant.
2. DataSections is turned on by default on AIX for llc.
3. Test cases change accordingly because of the default behaviour change.
4. Clang Driver passes in -fdata-sections by default on AIX.
Reviewed By: MaskRay, DiggerLin
Differential Revision: https://reviews.llvm.org/D88737
In lit tests, we run each LLD invocation twice (LLD_IN_TEST=2), without shutting down the process in-between. This ensures a full cleanup is properly done between runs.
Only active for the COFF driver for now. Other drivers still use LLD_IN_TEST=1 which executes just one iteration with full cleanup, like before.
When the environment variable LLD_IN_TEST is unset, a shortcut is taken, only one iteration is executed, no cleanup for faster exit, like before.
A public API, lld::safeLldMain(), is also available when using LLD as a library.
Differential Revision: https://reviews.llvm.org/D70378
ld64 is cool with leading `0x` for hex command-line args, and we should be also.
Reviewed By: #lld-macho, int3
Differential Revision: https://reviews.llvm.org/D88065
D80298 made Timer::total atomic, but this requires linking libatomic
on some targets.
Reviewed By: aaronpuchert
Differential Revision: https://reviews.llvm.org/D85691
Tools like `install_name_tool` and `codesign` may modify the Mach-O
header and increase its size. The linker has to provide padding to make this
possible. This diff does that, plus sets its default value to 32 bytes (which
is what ld64 does).
Unlike ld64, however, we lay out our sections *exactly* `-headerpad` bytes from
the header, whereas ld64 just treats the padding requirement as a lower bound.
ld64 actually starts laying out the non-header sections in the __TEXT segment
from the end of the (page-aligned) segment rather than the front, so its
binaries typically have more than `-headerpad` bytes of actual padding.
We should consider implementing the same alignment behavior.
Reviewed By: #lld-macho, compnerd
Differential Revision: https://reviews.llvm.org/D84714
The `intrinsics_gen` target exists in the CMake exports since r309389
(see LLVMConfig.cmake.in), hence projects can depend on `intrinsics_gen`
even it they are built separately from LLVM.
Reviewed By: MaskRay, JDevlieghere
Differential Revision: https://reviews.llvm.org/D83454
On Windows co-operative programs can be expected to open LLD's
output in FILE_SHARE_DELETE mode. This allows us to delete the
file (by moving it to a temporary filename and then deleting
it) so that we can link another output file that overwrites
the existing file, even if the current file is in use.
A similar strategy is documented here:
https://boostgsoc13.github.io/boost.afio/doc/html/afio/FAQ/deleting_open_files.html
Differential Revision: https://reviews.llvm.org/D82567
Summary:
This is a pre-requisite to parallelizing PDB symbol and type merging.
Currently this timer usage would not be thread safe.
Reviewers: aganea, MaskRay
Subscribers: jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80298
Summary:
Add the vendor macro to "lld" for extended version output support,
such that it's able to print additional version info. This is
consistent with the Clang and LLVM version printer, and the
additional version message can be provided via PACKAGE_VENDOR.
Reviewers: hubert.reinterpretcast, kbarton, cebowleratibm, rzurob, ruiu
Reviewed By: hubert.reinterpretcast
Subscribers: emaste, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79026
Essentially takes the lld/Common/Threads.h wrappers and moves them to
the llvm/Support/Paralle.h algorithm header.
The changes are:
- Remove policy parameter, since all clients use `par`.
- Rename the methods to `parallelSort` etc to match LLVM style, since
they are no longer C++17 pstl compatible.
- Move algorithms from llvm::parallel:: to llvm::, since they have
"parallel" in the name and are no longer overloads of the regular
algorithms.
- Add range overloads
- Use the sequential algorithm directly when 1 thread is requested
(skips task grouping)
- Fix the index type of parallelForEachN to size_t. Nobody in LLVM was
using any other parameter, and it made overload resolution hard for
for_each_n(par, 0, foo.size(), ...) because 0 is int, not size_t.
Remove Threads.h and update LLD for that.
This is a prerequisite for parallel public symbol processing in the PDB
library, which is in LLVM.
Reviewed By: MaskRay, aganea
Differential Revision: https://reviews.llvm.org/D79390
--no-threads is a name copied from gold.
gold has --no-thread, --thread-count and several other --thread-count-*.
There are needs to customize the number of threads (running several lld
processes concurrently or customizing the number of LTO threads).
Having a single --threads=N is a straightforward replacement of gold's
--no-threads + --thread-count.
--no-threads is used rarely. So just delete --no-threads instead of
keeping it for compatibility for a while.
If --threads= is specified (ELF,wasm; COFF /threads: is similar),
--thinlto-jobs= defaults to --threads=,
otherwise all available hardware threads are used.
There is currently no way to override a --threads={1,2,...}. It is still
a debate whether we should use --threads=all.
Reviewed By: rnk, aganea
Differential Revision: https://reviews.llvm.org/D76885
MCTargetOptionsCommandFlags.inc and CommandFlags.inc are headers which contain
cl::opt with static storage.
These headers are meant to be incuded by tools to make it easier to parametrize
codegen/mc.
However, these headers are also included in at least two libraries: lldCommon
and handle-llvm. As a result, when creating DYLIB, clang-cpp holds a reference
to the options, and lldCommon holds another reference. Linking the two in a
single executable, as zig does[0], results in a double registration.
This patch explores an other approach: the .inc files are moved to regular
files, and the registration happens on-demand through static declaration of
options in the constructor of a static object.
[0] https://bugzilla.redhat.com/show_bug.cgi?id=1756977#c5
Differential Revision: https://reviews.llvm.org/D75579
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
In ErrorHandler::error(), rearrange code to avoid calling exitLld with
the mutex locked. Acquire mutex lock when flushing the output streams in
exitLld.
Differential Revision: https://reviews.llvm.org/D73281
Summary:
Linker scripts allow filenames to be put in double quotes to prevent
characters in filenames that are part of the linker script syntax from
having their special meaning. Case in point the * wildcard character.
Availability of double quoting filenames also allows to fix a failure in
ELF/linkerscript/filename-spec.s when the path contain a @ which the
lexer consider as a special characters and thus break up a filename
containing it. This may happens under Jenkins which createspath such as
pipeline@2.
To avoid the need for escaping GlobPattern metacharacters in filename
in double quotes, GlobPattern::create is augmented with a new parameter
to request literal matching instead of relying on the presence of a
wildcard character in the pattern.
Reviewers: jhenderson, MaskRay, evgeny777, espindola, alexshap
Reviewed By: MaskRay
Subscribers: peter.smith, grimar, ruiu, emaste, arichardson, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72517
When LLVM_APPEND_VC_REV=OFF is set, the current git hash is no
longer embedded into binaries (mostly for --version output).
Without it, most binaries need to relink after every single
commit, even if they didn't change otherwise (due to, say,
a documentation-only commit).
LLVM_APPEND_VC_REV is ON by default, so this doesn't change the
default behavior of anything.
With this, all clients of GenerateVersionFromVCS.cmake honor
LLVM_APPEND_VC_REV.
Differential Revision: https://reviews.llvm.org/D72855
Changed ThreadPoolExecutor to no longer use detached threads and instead
to join threads on destruction. This is to prevent intermittent crashing
on Windows when doing a normal full exit, e.g. via exit().
Changed ThreadPoolExecutor to be a ManagedStatic so that it can be
stopped on llvm_shutdown(). Without this, it would only be stopped in
the destructor when doing a full exit. This is required to avoid
intermittent crashing on Windows due to a race condition between the
ThreadPoolExecutor starting up threads and the process doing a fast
exit, e.g. via _exit().
The Windows crashes appear to only occur with the MSVC static runtimes
and are more frequent with the debug static runtime.
These changes also prevent intermittent deadlocks on exit with the MinGW
runtime.
Differential Revision: https://reviews.llvm.org/D70447
Remove the lld::enableColors function, as it just obscures which
stream it's affecting, and replace with explicit calls to the stream's
enable_colors.
Also, assign the stderrOS and stdoutOS globals first in link function,
just to ensure nothing might use them.
(Either change individually fixes the issue of using the old
stream, but both together seems best.)
Follow-up to b11386f9be.
Differential Revision: https://reviews.llvm.org/D70492
This change is for those who use lld as a library. Context:
https://reviews.llvm.org/D70287
This patch adds a new parmeter to lld::*::link() so that we can pass
an raw_ostream object representing stdout. Previously, lld::*::link()
took only an stderr object.
Justification for making stdoutOS and stderrOS mandatory: I wanted to
make link() functions to take stdout and stderr in that order.
However, if we change the function signature from
bool link(ArrayRef<const char *> args, bool canExitEarly,
raw_ostream &stderrOS = llvm::errs());
to
bool link(ArrayRef<const char *> args, bool canExitEarly,
raw_ostream &stdoutOS = llvm::outs(),
raw_ostream &stderrOS = llvm::errs());
, then the meaning of existing code that passes stderrOS silently
changes (stderrOS would be interpreted as stdoutOS). So, I chose to
make existing code not to compile, so that developers can fix their
code.
Differential Revision: https://reviews.llvm.org/D70292
Instead of returning an optional, just return the input string if
demangling fails, as that's what all callers use anyway.
Differential Revision: https://reviews.llvm.org/D68015
llvm-svn: 373077
This avoids a few lines of boilerplate of dealing with C string
allocations.
Add a testcase for a case where demangling shouldn't happen.
Differential Revision: https://reviews.llvm.org/D68014
llvm-svn: 373076
The filename part in the message header is used by Visual Studio
to fill Error List so that a user can click on an item and jump
to the mentioned location. If we use only the name of a source file
and not the full path, Visual Studio might be unable to find the right
file or, even worse, show a wrong one.
Differential Revision: https://reviews.llvm.org/D65875
llvm-svn: 368409
D65213 (rL367536) does not work for the case when a source file path
includes subdirectories.
Differential Revision: https://reviews.llvm.org/D65810
llvm-svn: 368153
1. raw_ostream supports ANSI colors so that you can write messages to
the termina with colors. Previously, in order to change and reset
color, you had to call `changeColor` and `resetColor` functions,
respectively.
So, if you print out "error: " in red, for example, you had to do
something like this:
OS.changeColor(raw_ostream::RED);
OS << "error: ";
OS.resetColor();
With this patch, you can write the same code as follows:
OS << raw_ostream::RED << "error: " << raw_ostream::RESET;
2. Add a boolean flag to raw_ostream so that you can disable colored
output. If you disable colors, changeColor, operator<<(Color),
resetColor and other color-related functions have no effect.
Most LLVM tools automatically prints out messages using colors, and
you can disable it by passing a flag such as `--disable-colors`.
This new flag makes it easy to write code that works that way.
Differential Revision: https://reviews.llvm.org/D65564
llvm-svn: 367649
We extract and print the source location in the message header so that
Visual Studio is able to parse it and jump there. As duplicate symbols
are defined in several locations, it is more convenient to have separate
error messages, which allows a user to easily access all the locations.
Differential Revision: https://reviews.llvm.org/D65213
llvm-svn: 367536
Previously, when `--vs-diagnostics` was used, the linker printed
something like
hidden(undef.s): error: undefined hidden symbol: foo
>>> referenced by undef.s:15
Differential Revision: https://reviews.llvm.org/D65499
llvm-svn: 367515
Summary:
This could previously happen if errors that are emitted after reaching the
error limit. In that case, the flag inside the newline() function will be
set to true which causes the next call to print a newline even though the
actual message will be discarded.
Reviewers: ruiu, grimar, MaskRay, espindola
Reviewed By: ruiu
Subscribers: emaste, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65198
llvm-svn: 366944
lld currently selects the relocation model automatically depending on
the link flags specified, but in some cases it'd be useful to allow
explicitly overriding the relocation model using a flag.
llvm-svn: 366644
Summary:
Add a --vs-diagnostics flag that alters the format of diagnostic output
to enable source hyperlinks in Visual Studio.
Differential Revision: https://reviews.llvm.org/D58484
Reviewed by: ruiu
llvm-svn: 366333
This patch does the same thing as r365595 to other subdirectories,
which completes the naming style change for the entire lld directory.
With this, the naming style conversion is complete for lld.
Differential Revision: https://reviews.llvm.org/D64473
llvm-svn: 365730
With this, `clang-cl /source-charset:utf-16 test.cc` now prints `invalid
value 'utf-16' in '/source-charset:utf-16'` instead of `invalid value
'utf-16' in '-finput-charset=utf-16'` before, and several other clang-cl
flags produce much less confusing output as well.
Fixes PR29106.
Since an arg and its alias can have different arg types (joined vs not)
and different values (because of AliasArgs<>), I chose to give the Alias
its own Arg object. For convenience, I just store the alias directly in
the unaliased arg – there aren't many arg objects at runtime, so that
seems ok.
Finally, I changed Arg::getAsString() to use the alias's representation
if it's present – that function was already documented as being the
suitable function for diagnostics, and most callers already used it for
diagnostics.
Implementation-wise, Arg::accept() previously used to parse things as
the unaliased option. The core of that switch is now extracted into a
new function acceptInternal() which parses as the _aliased_ option, and
the previously-intermingled unaliasing is now done as an explicit step
afterwards.
(This also changes one place in lld that didn't use getAsString() for
diagnostics, so that that one place now also prints the flag as the user
wrote it, not as it looks after it went through unaliasing.)
Differential Revision: https://reviews.llvm.org/D64253
llvm-svn: 365413
Previously we were never setting this which means it was always being
set to Default (-O2/-Os).
Differential Revision: https://reviews.llvm.org/D57422
llvm-svn: 352667
jasonliu