Commit Graph

31 Commits

Author SHA1 Message Date
Dan Gohman 047a767d74 Remove the target hook TargetInstrInfo::BlockHasNoFallThrough in favor of
MachineBasicBlock::canFallThrough(), which is target-independent and more
thorough.

llvm-svn: 90634
2009-12-05 00:44:40 +00:00
Evan Cheng fe864425cb Refactor code.
llvm-svn: 86423
2009-11-08 00:15:23 +00:00
Jim Grosbach 4e9f379554 80-column cleanup of file header comments
llvm-svn: 86408
2009-11-07 22:00:39 +00:00
Evan Cheng 8b5278a466 t2ldrpci_pic can be used for blockaddress as well.
llvm-svn: 86400
2009-11-07 19:40:04 +00:00
Evan Cheng 207b246650 - Add pseudo instructions tLDRpci_pic and t2LDRpci_pic which does a pc-relative
load of a GV from constantpool and then add pc. It allows the code sequence to
  be rematerializable so it would be hoisted by machine licm.
- Add a late pass to break these pseudo instructions into a number of real
  instructions. Also move the code in Thumb2 IT pass that breaks up t2MOVi32imm
  to this pass. This is done before post regalloc scheduling to allow the
  scheduler to proper schedule these instructions. It also allow them to be
  if-converted and shrunk by later passes.

llvm-svn: 86304
2009-11-06 23:52:48 +00:00
Anton Korobeynikov 14635da94b Use NEON reg-reg moves, where profitable. This reduces "domain-cross" stalls, when we used to mix vfp and neon code (the former were used for reg-reg moves)
llvm-svn: 85764
2009-11-02 00:10:38 +00:00
Evan Cheng 1a4492be97 Fix a couple more places where we are creating ld / st instructions without memoperands.
llvm-svn: 85746
2009-11-01 22:04:35 +00:00
Bob Wilson 73789b848d Add a Thumb BRIND pattern. Change the ARM BRIND assembly to separate the
opcode and operand with a tab.  Check for these instructions in the usual
places.

llvm-svn: 85411
2009-10-28 18:26:41 +00:00
Evan Cheng b659dff4eb Forgot about ARM::tPUSH. It also has a new writeback operand.
llvm-svn: 83237
2009-10-02 05:03:07 +00:00
Evan Cheng 6f012d83f2 ARM::tPOP and tPOP_RET each has an extra writeback operand now.
llvm-svn: 83214
2009-10-01 20:54:53 +00:00
Evan Cheng e5801bd220 It's ok to spill a tGPR register as long as it's still allocated a low register.
llvm-svn: 78893
2009-08-13 05:40:51 +00:00
Evan Cheng cc9ca3500d Shrinkify Thumb2 load / store multiple instructions.
llvm-svn: 78717
2009-08-11 21:11:32 +00:00
Chris Lattner e98a3c3ca3 Move the getInlineAsmLength virtual method from TAI to TII, where
the only real caller (GetFunctionSizeInBytes) uses it.

The custom ARM implementation of this is basically reimplementing
an assembler poorly for negligible gain.  It should be removed 
IMNSHO, but I'll leave that to ARMish folks to decide.

llvm-svn: 77877
2009-08-02 05:20:37 +00:00
Evan Cheng 780748d565 - More refactoring. This gets rid of all of the getOpcode calls.
- This change also makes it possible to switch between ARM / Thumb on a
  per-function basis.
- Fixed thumb2 routine which expand reg + arbitrary immediate. It was using
  using ARM so_imm logic.
- Use movw and movt to do reg + imm when profitable.
- Other code clean ups and minor optimizations.

llvm-svn: 77300
2009-07-28 05:48:47 +00:00
Evan Cheng 38b7eee164 More DCE.
llvm-svn: 77231
2009-07-27 18:48:45 +00:00
Evan Cheng 18688f431d Get rid of more dead code.
llvm-svn: 77227
2009-07-27 18:38:54 +00:00
Evan Cheng 056c669e93 Get rid of some more getOpcode calls.
This also fixes potential problems in ARMBaseInstrInfo routines not recognizing thumb1 instructions when 32-bit and 16-bit instructions mix.

llvm-svn: 77218
2009-07-27 18:20:05 +00:00
Evan Cheng c47e109335 Use t2LDRi12 and t2STRi12 to load / store to / from stack frames. Eliminate more getOpcode calls.
llvm-svn: 77181
2009-07-27 03:14:20 +00:00
Evan Cheng 0e5b149930 Merge isLoadFromStackSlot into one since it behaves the same regardless of sub-target.
llvm-svn: 77174
2009-07-27 00:24:36 +00:00
Evan Cheng 26b51b15ed Just use a single isMoveInstr to catch all the cases.
llvm-svn: 77173
2009-07-27 00:05:15 +00:00
Evan Cheng faede73a32 Rename tMOVhi2lor to tMOVgpr2tgpr. It's not moving from a high register to a low register. It's moving from a GPR register class to a more restrictive tGPR class. Also change tMOVlor2hir, and tMOVhir2hir.
llvm-svn: 77172
2009-07-26 23:59:01 +00:00
Evan Cheng f3a1fce8ae Change Thumb2 jumptable codegen to one that uses two level jumps:
Before:
      adr r12, #LJTI3_0_0
      ldr pc, [r12, +r0, lsl #2]
LJTI3_0_0:
      .long    LBB3_24
      .long    LBB3_30
      .long    LBB3_31
      .long    LBB3_32

After:
      adr r12, #LJTI3_0_0
      add pc, r12, +r0, lsl #2
LJTI3_0_0:
      b.w    LBB3_24
      b.w    LBB3_30
      b.w    LBB3_31
      b.w    LBB3_32

This has several advantages.
1. This will make it easier to optimize this to a TBB / TBH instruction +
   (smaller) table.
2. This eliminate the need for ugly asm printer hack to force the address
   into thumb addresses (bit 0 is one).
3. Same codegen for pic and non-pic.
4. This eliminate the need to align the table so constantpool island pass
   won't have to over-estimate the size.

Based on my calculation, the later is probably slightly faster as well since
ldr pc with shifter address is very slow. That is, it should be a win as long
as the HW implementation can do a reasonable job of branch predict the second
branch.

llvm-svn: 77024
2009-07-25 00:33:29 +00:00
Eli Friedman 95fc6ee51a Remove unused member functions.
llvm-svn: 76960
2009-07-24 07:43:59 +00:00
Evan Cheng 6cfbe61361 FLDD, FLDS, FCPYD, FCPYS, FSTD, FSTS, VMOVD, VMOVQ maps to the same instructions on all sub-targets.
llvm-svn: 76925
2009-07-24 00:53:56 +00:00
David Goodwin cdd405d804 Correctly handle the Thumb-2 imm8 addrmode. Specialize frame index elimination more exactly for Thumb-2 to get better code gen.
llvm-svn: 76919
2009-07-24 00:16:18 +00:00
David Goodwin 6deba28c6f Fix frame index elimination to correctly handle thumb-2 addressing modes that don't allow negative offsets. During frame elimination convert *i12 opcode to a *i8 when necessary due to a negative offset.
llvm-svn: 76883
2009-07-23 17:06:46 +00:00
Anton Korobeynikov c5df7e2dc1 Emit cross regclass register moves for thumb2.
Minor code duplication cleanup.

llvm-svn: 76124
2009-07-16 23:26:06 +00:00
Evan Cheng cd4cdd1157 Major changes to Thumb (not Thumb2). Many 16-bit instructions either modifies CPSR when they are outside the IT blocks, or they can predicated when in Thumb2. Move the implicit def of CPSR to an optional def which defaults CPSR. This allows the 's' bit to be toggled dynamically.
A side-effect of this change is asm printer is now using unified assembly. There are some minor clean ups and fixes as well.

llvm-svn: 75359
2009-07-11 06:43:01 +00:00
David Goodwin 03ab0bbb24 Generalize opcode selection in ARMBaseRegisterInfo.
llvm-svn: 75036
2009-07-08 20:28:28 +00:00
David Goodwin af7451b674 Checkpoint Thumb2 Instr info work. Generalized base code so that it can be shared between ARM and Thumb2. Not yet activated because register information must be generalized first.
llvm-svn: 75010
2009-07-08 16:09:28 +00:00
David Goodwin ade05a37f1 Checkpoint refactoring of ThumbInstrInfo and ThumbRegisterInfo into Thumb1InstrInfo, Thumb2InstrInfo, Thumb1RegisterInfo and Thumb2RegisterInfo. Move methods from ARMInstrInfo to ARMBaseInstrInfo to prepare for sharing with Thumb2.
llvm-svn: 74731
2009-07-02 22:18:33 +00:00