increase the MachO/x86-64 stub alignment to 8.
Stub alignment should be guaranteed for any section containing RuntimeDyld
stubs/GOT-entries. To do this we should pad and align all sections containing
stubs, not just code sections.
This commit also bumps the MachO/x86-64 stub alignment to 8, so that GOT entries
will be aligned.
llvm-svn: 362139
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
This patch reduces the number of functions in the interface between RuntimeDyld
and RuntimeDyldChecker by combining "GetXAddress" and "GetXContent" functions
into "GetXInfo" functions that return a struct describing both the address and
content. The GetStubOffset function is also replaced with a pair of utilities,
GetStubInfo and GetGOTInfo, that fit the new scheme. For RuntimeDyld both of
these functions will return the same result, but for the new JITLink linker
(https://reviews.llvm.org/D58704) these will provide the addresses of PLT stubs
and GOT entries respectively.
For JITLink's use, a 'got_addr' utility has been added to the rtdyld-check
language, and the syntax of 'got_addr' and 'stub_addr' has been changed: both
functions now take two arguments, a 'stub container name' and a target symbol
name. For llvm-rtdyld/RuntimeDyld the stub container name is the object file
name and section name, separated by a slash. E.g.:
rtdyld-check: *{8}(stub_addr(foo.o/__text, y)) = y
For the upcoming llvm-jitlink utility, which creates stubs on a per-file basis
rather than a per-section basis, the container name is just the file name. E.g.:
jitlink-check: *{8}(got_addr(foo.o, y)) = y
llvm-svn: 358295
Prior to this change, the "Symbol" field of a relocation would always be
assumed to be a symbol name, and if no such symbol existed, the
relocation would reference index 0. This confused me when I tried to use
a literal symbol index in the field: since "0x1" was not a known symbol
name, the symbol index was set as 0. This change falls back to treating
unknown symbol names as integers, and emits an error if the name is not
found and the string is not an integer.
Note that the Symbol field is optional, so if a relocation doesn't
reference a symbol, it shouldn't be specified. The new error required a
number of test updates.
Reviewed by: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D58510
llvm-svn: 355938
lldb on Windows uses the ExecutionEngine for expression evaluation
and hits the llvm_unreachable due to this relocation. Thus, implement
the relocation and add a test to verify it's function.
llvm-svn: 348904
Non-loaded sections (whose unused load-address defaults to zero) should not
be taken into account when calculating ImageBase, or ImageBase will be
incorrectly set to 0.
Patch by Andrew Scheidecker. Thanks Andrew!
https://reviews.llvm.org/D51343
+ // The Sections list may contain sections that weren't loaded for
+ // whatever reason: they may be debug sections, and ProcessAllSections
+ // is false, or they may be sections that contain 0 bytes. If the
+ // section isn't loaded, the load address will be 0, and it should not
+ // be included in the ImageBase calculation.
llvm-svn: 344995
The relocation for branch instructions in the dynamic loader of ExecutionEngine assumes branch instructions with R_PPC64_REL24 relocation type are only bl. However, with the tail call optimization, b instructions can be also used to jump into another function.
This patch makes the relocation to keep bits in the branch instruction other than the jump offset to avoid relocation rewrites a b instruction into bl.
Differential Revision: https://reviews.llvm.org/D47456
llvm-svn: 333502
Previously thumb bits were only checked for external relocations (thumb to arm
code and vice-versa). This patch adds detection for thumb callees in the same
section asthe (also thumb) caller.
The MachO/Thumb test case is updated to cover this, and redundant checks
(handled by the MachO/ARM test) are removed.
llvm-svn: 331838
Summary: The bit widths are wrong.
Reviewers: bkramer, lhames, hans
Reviewed By: hans
Subscribers: hans, nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D45361
llvm-svn: 329573
test case.
r326290 fixed the assertion for decodeAddend, but not encodeAddend. The
regression test failed to catch this because it was missing the
subsections_via_symbols flag, so the desired relocation was not applied.
This patch also fixes the formatting of the assertion from r326290.
llvm-svn: 326406
Summary:
IMAGE_REL_AMD64_ADDR32NB relocations are currently set to zero in all cases.
This patch sets the relocation to the correct value when possible and shows an error when not.
Reviewers: enderby, lhames, compnerd
Reviewed By: compnerd
Subscribers: LepelTsmok, compnerd, martell, llvm-commits
Differential Revision: https://reviews.llvm.org/D30709
llvm-svn: 325700
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
We want to be writing a 32bit value, so we should be writing 4 bytes
instead of 2.
Patch by Alex Langford <apl@fb.com>.
Differential Revision: https://reviews.llvm.org/D38872
llvm-svn: 315964
This reverts commit SVN r313668. The original test case attempted to
write a pointer value into 16-bits, although the value may exceed the
range representable in 16-bits. Ensure that the symbol is located in
the address space such that its absolute address is representable in
16-bits. This should fix the assertion failure that was seen on the
Windows hosts.
llvm-svn: 313822
This reverts commit SVN r313654. Seems that it is triggering an
assertion on Windows specifically. Revert until I can build on Windows
and look into what is happening there.
llvm-svn: 313668
Add support for the R_AARCH64_ABS{16,32} relocations in the execution
engine. This is primarily used for DWARF debug information relocations
and needed by the LLVM JIT to support JITing for lldb.
Patch by Alex Langford!
llvm-svn: 313654
Re-committing after r311325 fixed an unintentional use of '#' comments in
clang.
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 311326
The %T lit expansion expands to a common directory shared between all the tests in the same directory, which is unexpected and unintuitive, and more importantly, it's been a source of subtle race conditions and flaky tests. In https://reviews.llvm.org/D35396, it was agreed that it would be best to simply ban %T and only keep %t, which is unique to each test. When a test needs a temporary directory, it can just create one using mkdir %t.
This patch removes %T in llvm.
Differential Revision: https://reviews.llvm.org/D36495
llvm-svn: 310953
This patch adds support for thumb relocations to RuntimeDyldMachOARM, and adds
a target-specific flags field to JITSymbolFlags (so that on ARM we can record
whether each symbol is Thumb-mode code).
RuntimeDyldImpl::emitSection is modified to ensure that stubs memory is
correctly aligned based on the size returned by getStubAlignment().
llvm-svn: 310517
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 310457
I was surprised to see the code model being passed to MC. After all,
it assembles code, it doesn't create it.
The one place it is used is in the expansion of .cfi directives to
handle .eh_frame being more that 2gb away from the code.
As far as I can tell, gnu assembler doesn't even have an option to
enable this. Compiling a c file with gcc -mcmodel=large produces a
regular looking .eh_frame. This is probably because in practice linker
parse and recreate .eh_frames.
In llvm this is used because the JIT can place the code and .eh_frame
very far apart. Ideally we would fix the jit and delete this
option. This is hard.
Apart from confusion another problem with the current interface is
that most callers pass CodeModel::Default, which is bad since MC has
no way to map it to the target default if it actually needed to.
This patch then replaces the argument with a boolean with a default
value. The vast majority of users don't ever need to look at it. In
fact, only CodeGen and llvm-mc use it and llvm-mc just to enable more
testing.
llvm-svn: 309884
Summary:
Debug info sections, (or non-SHF_ALLOC sections in general) should be
linked as if their load address was zero to emulate the behavior of the
static linker.
This bug was discovered because it was breaking lldb expression evaluation on
linux.
Reviewers: lhames
Subscribers: aprantl, eugene, clayborg, lldb-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D32899
llvm-svn: 303239
This patch implements two GOT relocations:
R_AARCH64_ADR_GOT_PAGE and R_AARCH64_LD64_GOT_LO12_NC
Differential revision: https://reviews.llvm.org/D28571
llvm-svn: 294191
This patch doesn't create thunk for branch operation when following conditions are met:
- Architecture is AArch64
- Relocation target is in the same object file
- Relocation target is close enough to be encoded in immediate offset
In such case we branch directly to the target instead of branching to thunk
Differential revision: https://reviews.llvm.org/D28108
llvm-svn: 291431
Summary: The relocation is missing mask so an address that has non-zero bits in 47:43 may overwrite the register number. (Frequently shows up as target register changed to `xzr`....)
Reviewers: t.p.northover, lhames
Subscribers: davide, aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D27609
llvm-svn: 289880
Summary:
This adds the necessary logic to support relocations to thumb functions in the COFF dynamic linker.
The jumps to function addresses are mostly blx, which requires the ISA selection bit when jumping to a thumb function.
Note: I'm determining if the relocation requires the ISA bit when creating the relocation entries and not when resolving the relocation. I have to do that because I need the ObjectFile and the actual Symbol, which are available only when creating the entries. It would require a gross refactor if I do it otherwise, but I'm okay with doing it if you think it's better.
Reviewers: peter.smith, compnerd
Subscribers: rengolin, sas
Differential Revision: https://reviews.llvm.org/D25151
llvm-svn: 284410
According to the arm arm specifications, 4 bytes are needed for a shift instead
of 8, this was causing the movt instruction to write to a different register
sometimes.
Patch by Walter Erquinigo!
llvm-svn: 280005
If there was a tail call, we would incorrectly handle the relocation. It would
end up indexing into the array with an incorrect section id. The symbol was
external to the module, so the Section ID was UNDEFINED (-1). We would then
index the SmallVector with this ID, triggering an assertion. Use the Value
rather than the section load address in this case.
llvm-svn: 275442
This adds rudimentary support for COFF ARM to the dynamic loader for the
exeuction engine. This can be used by lldb to JIT code into a COFF ARM
environment. This lays the foundation for the loader, though a few of the
relocation types are yet unhandled.
llvm-svn: 273682
Adam Kallai