For now just port some of the existing NVPTX tests
and from an old HSAIL optimization pass which
approximately did the same thing.
Don't enable the pass yet until more testing is done.
llvm-svn: 293580
Make SolveLinEquationWithOverflow take the start as a SCEV, so we can
solve more cases. With that implemented, get rid of the special case
for powers of two.
The additional functionality probably isn't particularly useful,
but it might help a little for certain cases involving pointer
arithmetic.
Differential Revision: https://reviews.llvm.org/D28884
llvm-svn: 293576
Summary:
In revision rL278321, ExecutionDepsFix learned how to pick a better
register for undef register reads, e.g. for instructions such as
`vcvtsi2sdq`. While this revision improved performance on a good number
of our benchmarks, it unfortunately also caused significant regressions
(up to 3x) on others. This regression turned out to be caused by loops
such as:
PH -> A -> B (xmm<Undef> -> xmm<Def>) -> C -> D -> EXIT
^ |
+----------------------------------+
In the previous version of the clearance calculation, we would visit
the blocks in order, remembering for each whether there were any
incoming backedges from blocks that we hadn't processed yet and if
so queuing up the block to be re-processed. However, for loop structures
such as the above, this is clearly insufficient, since the block B
does not have any unknown backedges, so we do not see the false
dependency from the previous interation's Def of xmm registers in B.
To fix this, we need to consider all blocks that are part of the loop
and reprocess them one the correct clearance values are known. As
an optimization, we also want to avoid reprocessing any later blocks
that are not part of the loop.
In summary, the iteration order is as follows:
Before: PH A B C D A'
Corrected (Naive): PH A B C D A' B' C' D'
Corrected (w/ optimization): PH A B C A' B' C' D
To facilitate this optimization we introduce two new counters for each
basic block. The first counts how many of it's predecssors have
completed primary processing. The second counts how many of its
predecessors have completed all processing (we will call such a block
*done*. Now, the criteria to reprocess a block is as follows:
- All Predecessors have completed primary processing
- For x the number of predecessors that have completed primary
processing *at the time of primary processing of this block*,
the number of predecessors that are done has reached x.
The intuition behind this criterion is as follows:
We need to perform primary processing on all predecessors in order to
find out any direct defs in those predecessors. When predecessors are
done, we also know that we have information about indirect defs (e.g.
in block B though that were inherited through B->C->A->B). However,
we can't wait for all predecessors to be done, since that would
cause cyclic dependencies. However, it is guaranteed that all those
predecessors that are prior to us in reverse postorder will be done
before us. Since we iterate of the basic blocks in reverse postorder,
the number x above, is precisely the count of the number of predecessors
prior to us in reverse postorder.
Reviewers: myatsina
Differential Revision: https://reviews.llvm.org/D28759
llvm-svn: 293571
Create a WasmDumper subclass of ObjDumper to support Webassembly binary
files.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D27355
llvm-svn: 293569
Since we have no call support and late linking we can produce code
only for used symbols. This saves compilation time, size of the final
executable, and size of any intermediate dumps.
Run Internalize pass early in the opt pipeline followed by global
DCE pass. To enable it RT can pass -amdgpu-internalize-symbols option.
Differential Revision: https://reviews.llvm.org/D29214
llvm-svn: 293549
To better match the old darwin otool(1) behavior, when llvm-obdump(1) is used
with the -macho option and the input file is not an object file simply print
the file name and this message:
foo: is not an object file
and continue on to process other input files. Also in this case don’t exit
non-zero. This should help in some OSS projects' with autoconf scripts
that are expecting the old darwin otool(1) behavior.
rdar://26828015
llvm-svn: 293547
For some reason the exception selector register must be a pointer (that's
assumed by SDag); on the other hand, it gets moved into an IR-level type which
might be entirely different (i32 on AArch64). IRTranslator needs to be aware of
this.
llvm-svn: 293546
For targets with different addressing modes in each address space,
if this is dropped querying isLegalAddressingMode later with this
will give a nonsense result, breaking the isLegalUse assertions.
This is a candidate for the 4.0 release branch.
llvm-svn: 293542
This is worse if the original constant is an inline immediate.
This should also be done for 64-bit adds, but requires fixing
operand folding bugs first.
llvm-svn: 293540
Previously, we would hit UB (or the ISD::DELETED_NODE assert) if we
happened to replace a node during UpdateChains, because it would be
left in the list we were iterating over. This nulls out the pointer
when that happens so that we can avoid the issue.
Fixes llvm.org/PR31710
llvm-svn: 293522
This reverts commit r293196
Besides making things look nicer, ATM, we'd like to preserve analysis
more than we'd like to destroy the CFG. We'll probably revisit in the future
llvm-svn: 293501
The original shift is bigger, so this may qualify as 'obvious',
but here's an attempt at an Alive-based proof:
Name: exact
Pre: (C1 u< C2)
%a = shl i8 %x, C1
%b = lshr exact i8 %a, C2
=>
%c = lshr exact i8 %x, C2 - C1
%b = and i8 %c, ((1 << width(C1)) - 1) u>> C2
Optimization is correct!
llvm-svn: 293498
Summary:
AMDGPU has two register classes with the same set of registers, and this
was causing this tablegen backend would get stuck in infinite recursion.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: tpr, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D29049
llvm-svn: 293483
Previously this test case fired an assertion in getNode because we tried to create an insert_subvector with both input types the same size and the index pointing to half the vector width.
llvm-svn: 293446
Replaces an xor+movd/movq with an xorps which will be shorter in codesize, avoid an int-fpu transfer, allow modern cores to fast path the result during decode and helps other combines recognise an all-zero vector.
The only reason I can think of that we'd want to keep scalar_to_vector in this case is to help recognise the upper elts are undef but this doesn't seem to be a problem.
Differential Revision: https://reviews.llvm.org/D29097
llvm-svn: 293438
Support lowering AEABI TLS access (__aeabi_read_tp) with long calls.
This requires adjusting the call sequence to use an indirect call to get
full addressability.
Resolves PR31769!
llvm-svn: 293433
PACKUSWB converts Signed word to Unsigned byte, (the same about DW) and it can't be used for umin+truncate pattern.
AVX-512 VPMOVUS* instructions fit the pattern since they convert Unsigned to Unsigned.
See https://llvm.org/bugs/show_bug.cgi?id=31773
Differential Revision: https://reviews.llvm.org/D29196
llvm-svn: 293431
Summary:
Adds the following instructions:
* mfpmr
* mtpmr
* icblc
* icblq
* icbtls
Fix the scheduling for mtspr on e5500, which uses CFX0, instead of
SFX0/SFX1 as on e500mc.
Addresses PR 31538.
Differential Revision: https://reviews.llvm.org/D29002
llvm-svn: 293417
The matching code tries to canonicalize XOR to the left, but if there are two XORs and only one is a vnot, this canonicalization can prevent matching.
llvm-svn: 293402
The jumbled scalar loads will be sorted while building the tree and these accesses will be marked to generate shufflevector after the vectorized load with proper mask.
Reviewers: hfinkel, mssimpso, mkuper
Differential Revision: https://reviews.llvm.org/D26905
Change-Id: I9c0c8e6f91a00076a7ee1465440a3f6ae092f7ad
llvm-svn: 293386
Support for barrier synchronization between a subset of threads
in a CTA through one of sixteen explicitly specified barriers.
These intrinsics are not directly exposed in CUDA but are
critical for forthcoming support of OpenMP on NVPTX GPUs.
The intrinsics allow the synchronization of an arbitrary
(multiple of 32) number of threads in a CTA at one of 16
distinct barriers. The two intrinsics added are as follows:
call void @llvm.nvvm.barrier.n(i32 10)
waits for all threads in a CTA to arrive at named barrier #10.
call void @llvm.nvvm.barrier(i32 15, i32 992)
waits for 992 threads in a CTA to arrive at barrier #15.
Detailed description of these intrinsics are available in the PTX manual.
http://docs.nvidia.com/cuda/parallel-thread-execution/#parallel-synchronization-and-communication-instructions
Reviewers: hfinkel, jlebar
Differential Revision: https://reviews.llvm.org/D17657
llvm-svn: 293384
Summary:
Patch by Michele Scandale
(with a small tweak to 'CHECK-NOT' the last DILocation in the test)
Subscribers: bogner, llvm-commits
Differential Revision: https://reviews.llvm.org/D27980
llvm-svn: 293377
Summary: Along with https://reviews.llvm.org/D27804, debug locations need to be merged when hoisting store instructions as well. Not sure if just dropping debug locations would make more sense for this case, but as the branch instruction will have at least different discriminator with the hoisted store instruction, I think there will be no difference in practice.
Reviewers: aprantl, andreadb, danielcdh
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29062
llvm-svn: 293372
When the OperandsMapper creates virtual registers, it used to just create
plain scalar register with the right size. This may confuse the
instruction selector because we lose the information of the instruction
using those registers what supposed to do. The MachineVerifier complains
about that already.
With this patch, the OperandsMapper still creates plain scalar register,
but the expectation is for the mapping function to remap the type
properly. The default mapping function has been updated to do that.
rdar://problem/30231850
llvm-svn: 293362
In r292621, the recommit fixes a bug related with live interval update
after the partial redundent copy is moved.
This recommit solves an additional bug related to the lack of update of
subranges.
The original patch is to solve the performance problem described in
PR27827. Register coalescing sometimes cannot remove a copy because of
interference. But if we can find a reverse copy in one of the predecessor
block of the copy, the copy is partially redundent and we may remove the
copy partially by moving it to the predecessor block without the
reverse copy.
Differential Revision: https://reviews.llvm.org/D28585
Re-apply r292621
Revert "Revert rL292621. Caused some internal build bot failures in apple."
This reverts commit r292984.
Original patch: Wei Mi <wmi@google.com>
Subrange fix: Mostly Matthias Braun <matze@braunis.de>
llvm-svn: 293353
This is a minimal patch to avoid the infinite loop in:
https://llvm.org/bugs/show_bug.cgi?id=31751
But the general problem is bigger: we're not canonicalizing all of the min/max forms reported
by value tracking's matchSelectPattern(), and we don't define min/max consistently. Some code
uses matchSelectPattern(), other code uses matchers like m_Umax, and others have their own
inline definitions which may be subtly different from any of the above.
The reason that the test cases in this patch need a cast op to trigger is because we don't
(yet) canonicalize all min/max forms based on matchSelectPattern() in
canonicalizeMinMaxWithConstant(), but we do make min/max+cast transforms based on
matchSelectPattern() in visitSelectInst().
The location of the icmp transforms that trigger the inf-loop seems arbitrary at best, so
I'm moving those behind the min/max fence in visitICmpInst() as the quick fix.
llvm-svn: 293345
Summary: Small change to get the FREEP instruction to decode properly.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29193
llvm-svn: 293314
Accomplishes what r292982 was supposed to, which ended up
only really making the necessary test changes.
This should be applied to the 4.0 branch.
Patch by Vedran Miletić <vedran@miletic.net>
llvm-svn: 293310
The interleaved access pass is an IR-to-IR transformation that runs before code
generation. It matches interleaved memory operations to target-specific
intrinsics (that are later lowered to load and store multiple instructions on
ARM/AArch64). We place tests for similar passes (e.g., GlobalMergePass) under
test/Transforms. This patch moves the InterleavedAccessPass tests out of
test/CodeGen and into target-specific directories under
test/Transforms/InterleavedAccess.
Although the pass is an IR pass, many of the existing tests were llc tests
rather opt tests. For example, the tests would check for ldN/stN instructions
generated by llc rather than the intrinsic calls the pass actually inserts.
Thus, this patch updates all tests to be opt tests that check for the inserted
intrinsics. We already have separate CodeGen tests that ensure we lower the
interleaved access intrinsics to their corresponding ldN/stN instructions. In
addition to migrating the tests to opt, this patch also performs some minor
clean-up (to ensure consistent naming, etc.).
Differential Revision: https://reviews.llvm.org/D29184
llvm-svn: 293309
Summary: This change prevent the signed value of cost from being negative as the value is passed as an unsigned argument.
Reviewers: mcrosier, jmolloy, qcolombet, javed.absar
Reviewed By: mcrosier, qcolombet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28871
llvm-svn: 293307
With the adjustPassManager interface that is now possible to use
custom early module passes.
Differential Revision: https://reviews.llvm.org/D29189
llvm-svn: 293300
This is fixing pr31761: BasicAA is deducing NoAlias
on the result of the GEP if the base pointer is itself NoAlias.
This is possible only if the NoAlias on the base pointer is
deduced with a non-sized query: this should guarantee that
the pointers are belonging to different memory allocation
and that the GEP can't legally jump from one to another.
Differential Revision: https://reviews.llvm.org/D29216
llvm-svn: 293293
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
This version corrects a "Conditional jump or move depends on uninitialised
value(s)" error detected by valgrind present in the original commit.
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293279
skip sub-subloops.
The logic to skip subloops dated from when this code was shared with the
cached case. Once it was factored out to only run in the case of
recomputed subloops it became a dangerous bug. If a subsubloop contained
an interfering instruction it would be silently skipped from the alias
sets for LICM.
With the old pass manager this was extremely hard to trigger as it would
require failing to visit these subloops with the LICM pass but then
visiting the outer loop somehow. I've not yet contrived any test case
that actually manages to trigger this.
But with the new pass manager we don't do the cross-loop caching hack
that the old PM does and so we recompute alias set information from
first principles. While this seems much cleaner and simpler it exposed
this bug and would subtly miscompile code due to failing to correctly
model the aliasing constraints of deeply nested loops.
llvm-svn: 293273
In case of a SIGN/ZERO_EXTEND of an incomplete vector type (using only a
partial number of available vector elements), WidenVecRes_Convert() used to
resort to scalarization.
This patch adds a handling of the (common) case where an input vector can be
found of same width as the widened result vector, by converting the node to
SIGN/ZERO_EXTEND_VECTOR_INREG.
Review: Eli Friedman
llvm-svn: 293268
The Windows on ARM target uses custom division for normal division as
the backend needs to insert division-by-zero checks. However, it is
designed to only handle non-vectorized division. ARM has custom
lowering for vectorized division as that can avoid loading registers
with the values and invoke a division routine for each one, preferring
to lower using NEON instructions. Fall back to the custom lowering for
the NEON instructions if we encounter a vectorized division.
Resolves PR31778!
llvm-svn: 293259
Summary:
This adds basic dead and redundant store elimination to
NewGVN. Unlike our current DSE, it will happily do cross-block DSE if
it meets our requirements.
We get a bunch of DSE's simple.ll cases, and some stuff it doesn't.
Unlike DSE, however, we only try to eliminate stores of the same value
to the same memory location, not just general stores to the same
memory location.
Reviewers: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29149
llvm-svn: 293258
the main pipeline.
This is a very straight forward port. Nothing weird or surprising.
This brings the number of missing passes from the new PM's pipeline down
to three.
llvm-svn: 293249
Summary:
There are many NVVM intrinsics that we can't entirely get rid of, but
that nonetheless often correspond to target-generic LLVM intrinsics.
For example, if flush denormals to zero (ftz) is enabled, we can convert
@llvm.nvvm.ceil.ftz.f to @llvm.ceil.f32. On the other hand, if ftz is
disabled, we can't do this, because @llvm.ceil.f32 will be lowered to a
non-ftz PTX instruction. In this case, we can, however, simplify the
non-ftz nvvm ceil intrinsic, @llvm.nvvm.ceil.f, to @llvm.ceil.f32.
These transformations are particularly useful because they let us
constant fold instructions that appear in libdevice, the bitcode library
that ships with CUDA and essentially functions as its libm.
Reviewers: tra
Subscribers: hfinkel, majnemer, llvm-commits
Differential Revision: https://reviews.llvm.org/D28794
llvm-svn: 293244
With this the per-module pass pipeline is *extremely* close to the
legacy PM. The missing pieces are:
- PruneEH (or some equivalent)
- ArgumentPromotion
- LoopLoadElimination
- LoopUnswitch
I'm going to work through those in essentially that order but this seems
like a worthwhile incremental step toward the end state.
One difference in what I have here from the legacy PM is that I've
consolidated some of the per-function passes at the very end of the
pipeline into the main optimization function pipeline. The intervening
passes are *really* uninteresting and so this seems very likely to have
any effect other than minor improvement to locality.
Note that there are still some failures in the test suite, but the
compiler doesn't crash or assert.
Differential Revision: https://reviews.llvm.org/D29114
llvm-svn: 293241
The translation scheme is mostly cribbed from FastISel, and it's not entirely
convincing semantically. But it does seem to work in the common cases and allow
variables to be printed so it can't be all wrong.
llvm-svn: 293228
This change reverts:
r293061: "[InstCombine] Canonicalize guards for NOT OR condition"
r293058: "[InstCombine] Canonicalize guards for AND condition"
They miscompile cases like:
```
declare void @llvm.experimental.guard(i1, ...)
define void @test_guard_not_or(i1 %A, i1 %B) {
%C = or i1 %A, %B
%D = xor i1 %C, true
call void(i1, ...) @llvm.experimental.guard(i1 %D, i32 20, i32 30)[ "deopt"() ]
ret void
}
```
because they do transfer the `i32 20, i32 30` parameters to newly
created guard instructions.
llvm-svn: 293227
This commit introduces a set of experimental intrinsics intended to prevent
optimizations that make assumptions about the rounding mode and floating point
exception behavior. These intrinsics will later be extended to specify
flush-to-zero behavior. More work is also required to model instruction
dependencies in machine code and to generate these instructions from clang
(when required by pragmas and/or command line options that are not currently
supported).
Differential Revision: https://reviews.llvm.org/D27028
llvm-svn: 293226
loop-unswitch in the main pipelines for the new PM.
All of these now work, and Clang built using this pipeline can build the
test suite and SPEC without hitting any asserts of ASan failures.
There are still some bugs hiding though -- 7 tests regress with the new
PM. I'm going to be investigating these, but it seems worthwhile to at
least get the pipelines in place so that others can play with them, and
they aren't completely broken.
Differential Revision: https://reviews.llvm.org/D29113
llvm-svn: 293225
R_X86_64_NONE can be emitted without a symbol associated (well,
in theory it should never be emitted in an ABI-compliant relocatable
object). So, if there's no symbol associated to a reloc, emit one
with an empty name, instead of crashing.
Ack'ed by Michael Spencer offline.
PR: 31768
llvm-svn: 293224
Summary:
This does not actually fix the testcase in PR31761 (discussion is
ongoing on the testcase), but does fix a bug it exposes, where stores
were not properly clobbering loads.
We accomplish this by unifying the memory equivalence infratructure
back into the normal congruence infrastructure, and then properly
destroying congruence classes when memory state leaders disappear.
Reviewers: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29195
llvm-svn: 293216
We already have this fold when the lshr has one use, but it doesn't need that
restriction. We may be able to remove some code from foldShiftedShift().
Also, move the similar:
(X << C) >>u C --> X & (-1 >>u C)
...directly into visitLShr to help clean up foldShiftByConstOfShiftByConst().
That whole function seems questionable since it is called by commonShiftTransforms(),
but there's really not much in common if we're checking the shift opcodes for every
fold.
llvm-svn: 293215
1) Explicitly sets mayLoad/mayStore property in the tablegen files on load/store
instructions.
2) Updated the flags on a number of intrinsics indicating that they write
memory.
3) Added SDNPMemOperand flags for some target dependent SDNodes so that they
propagate their memory operand
Review: https://reviews.llvm.org/D28818
llvm-svn: 293200
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293184
And teach shouldAssumeDSOLocal that ppc has no copy relocations.
The resulting code handle a few more case than before. For example, it
knows that a weak symbol can be resolved to another .o file, but it
will still be in the main executable.
llvm-svn: 293180
Inlining in getAddExpr() can cause abnormal computational time in some cases.
New parameter -scev-addops-inline-threshold is intruduced with default value 500.
Reviewers: sanjoy
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D28812
llvm-svn: 293176
change the set of uniform instructions in the loop causing an assert
failure.
The problem is that the legalization checking also builds data
structures mapping various facts about the loop body. The immediate
cause was the set of uniform instructions. If these then change when
LCSSA is formed, the data structures would already have been built and
become stale. The included test case triggered an assert in loop
vectorize that was reduced out of the new PM's pipeline.
The solution is to form LCSSA early enough that no information is cached
across the changes made. The only really obvious position is outside of
the main logic to vectorize the loop. This also has the advantage of
removing one case where forming LCSSA could mutate the loop but we
wouldn't track that as a "Changed" state.
If it is significantly advantageous to do some legalization checking
prior to this, we can do a more careful positioning but it seemed best
to just back off to a safe position first.
llvm-svn: 293168
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293164
Add support for loading i1, i8 and i16 arguments from the stack, with or without
the ABI extension flags.
When the ABI extension flags are present, we load a 4-byte value, otherwise we
preserve the size of the load and let the instruction selector replace it with a
LDRB/LDRH. This generates the same thing as DAGISel.
Differential Revision: https://reviews.llvm.org/D27803
llvm-svn: 293163
factory functions for the two modes the loop unroller is actually used
in in-tree: simplified full-unrolling and the entire thing including
partial unrolling.
I've also wired these up to nice names so you can express both of these
being in a pipeline easily. This is a precursor to actually enabling
these parts of the O2 pipeline.
Differential Revision: https://reviews.llvm.org/D28897
llvm-svn: 293136
Even when we don't create a remainder loop (that is, when we unroll by 2), we
may duplicate nested loops into the remainder. This is complicated by the fact
the remainder may itself be either inserted into an outer loop, or at the top
level. In the latter case, we may need to create new top-level loops.
Differential Revision: https://reviews.llvm.org/D29156
llvm-svn: 293124
Summary:
Previously we assumed that the result of sqrt(x) always had 0 as its
sign bit. But sqrt(-0) == -0.
Reviewers: hfinkel, efriedma, sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28928
llvm-svn: 293115
This allows MIR passes to emit optimization remarks with the same level
of functionality that is available to IR passes.
It also hooks up the greedy register allocator to report spills. This
allows for interesting use cases like increasing interleaving on a loop
until spilling of registers is observed.
I still need to experiment whether reporting every spill scales but this
demonstrates for now that the functionality works from llc
using -pass-remarks*=<pass>.
Differential Revision: https://reviews.llvm.org/D29004
llvm-svn: 293110
Mach-O files don’t have size information about the symbols in the object file
format unlike ELF.
Also add the part of the fix to llvm-nm that was missed with r290001 so
-arch armv7m works.
rdar://25681018
llvm-svn: 293099
This reverts commit r292680. It is causing significantly worse
performance and test timeouts in our internal builds. I have already
routed reproduction instructions your way.
llvm-svn: 293092
This is not a list of pairs, it is a hash table data structure. We now
correctly parse this out and dump it from llvm-pdbdump.
We still need to understand the conditions that lead to a type
getting an entry in the hash adjuster table. That will be done
in a followup investigation / patch.
Differential Revision: https://reviews.llvm.org/D29090
llvm-svn: 293090
Later code expects the vector loads produced to be directly
concatenable, which means we shouldn't pad anything except the last load
produced with UNDEF.
llvm-svn: 293088
Summary:
This patch prepares more for tail call support in XRay. Until the logging part supports tail calls, this is just staging, so it seems LLVM part is mostly ready with this patch.
Related: https://reviews.llvm.org/D28948 (compiler-rt)
Reviewers: dberris, rengolin
Reviewed By: dberris
Subscribers: llvm-commits, iid_iunknown, aemerson
Differential Revision: https://reviews.llvm.org/D28947
llvm-svn: 293080
This patch introduces guard based loop predication optimization. The new LoopPredication pass tries to convert loop variant range checks to loop invariant by widening checks across loop iterations. For example, it will convert
for (i = 0; i < n; i++) {
guard(i < len);
...
}
to
for (i = 0; i < n; i++) {
guard(n - 1 < len);
...
}
After this transformation the condition of the guard is loop invariant, so loop-unswitch can later unswitch the loop by this condition which basically predicates the loop by the widened condition:
if (n - 1 < len)
for (i = 0; i < n; i++) {
...
}
else
deoptimize
This patch relies on an NFC change to make ScalarEvolution::isMonotonicPredicate public (revision 293062).
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D29034
llvm-svn: 293064
This is a partial fix for Bug 31520 - [guards] canonicalize guards in instcombine
Reviewed By: apilipenko
Differential Revision: https://reviews.llvm.org/D29075
Patch by Maxim Kazantsev.
llvm-svn: 293061
This is a partial fix for Bug 31520 - [guards] canonicalize guards in instcombine
Reviewed By: apilipenko
Differential Revision: https://reviews.llvm.org/D29074
Patch by Maxim Kazantsev.
llvm-svn: 293058
This is a partial fix for Bug 31520 - [guards] canonicalize guards in instcombine
Reviewed By: majnemer, apilipenko
Differential Revision: https://reviews.llvm.org/D29071
Patch by Maxim Kazantsev.
llvm-svn: 293056
instructions.
If number of instructions in horizontal reduction list is not power of 2
then only PowerOf2Floor(NumberOfInstructions) last elements are actually
vectorized, other instructions remain scalar. Patch tries to vectorize
the remaining elements either.
Differential Revision: https://reviews.llvm.org/D28959
llvm-svn: 293042
Floating point intrinsics in LLVM are generally not speculatively
executed, since most of them are defined to behave the same as libm
functions, which set errno.
However, the @llvm.powi.* intrinsics do not correspond to any libm
function, and lacks any defined error handling semantics in LangRef.
It most certainly does not alter errno.
llvm-svn: 293041
The previous patch (https://reviews.llvm.org/rL289538) got reverted because of a bug. Chandler also requested some changes to the algorithm.
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161212/413479.html
This is an updated patch. The key difference is that collectBitProviders (renamed to calculateByteProvider) now collects the origin of one byte, not the whole value. It simplifies the implementation and allows to stop the traversal earlier if we know that the result won't be used.
From the original commit:
Match a pattern where a wide type scalar value is loaded by several narrow loads and combined by shifts and ors. Fold it into a single load or a load and a bswap if the targets supports it.
Assuming little endian target:
i8 *a = ...
i32 val = a[0] | (a[1] << 8) | (a[2] << 16) | (a[3] << 24)
=>
i32 val = *((i32)a)
i8 *a = ...
i32 val = (a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]
=>
i32 val = BSWAP(*((i32)a))
This optimization was discussed on llvm-dev some time ago in "Load combine pass" thread. We came to the conclusion that we want to do this transformation late in the pipeline because in presence of atomic loads load widening is irreversible transformation and it might hinder other optimizations.
Eventually we'd like to support folding patterns like this where the offset has a variable and a constant part:
i32 val = a[i] | (a[i + 1] << 8) | (a[i + 2] << 16) | (a[i + 3] << 24)
Matching the pattern above is easier at SelectionDAG level since address reassociation has already happened and the fact that the loads are adjacent is clear. Understanding that these loads are adjacent at IR level would have involved looking through geps/zexts/adds while looking at the addresses.
The general scheme is to match OR expressions by recursively calculating the origin of individual bytes which constitute the resulting OR value. If all the OR bytes come from memory verify that they are adjacent and match with little or big endian encoding of a wider value. If so and the load of the wider type (and bswap if needed) is allowed by the target generate a load and a bswap if needed.
Reviewed By: RKSimon, filcab, chandlerc
Differential Revision: https://reviews.llvm.org/D27861
llvm-svn: 293036
Add support for:
* i1 add
* i1 function arguments, if passed through registers
* i1 returns, with ABI signext/zeroext
Differential Revision: https://reviews.llvm.org/D27706
llvm-svn: 293035
At the moment, this means supporting the signext/zeroext attribute on the return
type of the function. For function arguments, signext/zeroext should be handled
by the caller, so there's nothing for us to do until we start lowering calls.
Note that this does not include support for other extensions (i8 to i16), those
will be added later.
Differential Revision: https://reviews.llvm.org/D27705
llvm-svn: 293034
If dominator tree has no roots, the pass that calculates it is
likely to be skipped. It occures, for instance, in the case of
entities with linkage available_externally. Do not run tree
verification in such case.
Differential Revision: https://reviews.llvm.org/D28767
llvm-svn: 293033
Summary:
A patch to enable the llvm-xray graph subcommand to color edges and
vertices based on statistics and to annotate vertices with statistics.
Depends on D27243
Reviewers: dblaikie, dberris
Reviewed By: dberris
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D28225
llvm-svn: 293031
Enable the next form (intel style):
"mov <reg64>, <largeImm>"
which is should be available,
where <largeImm> stands for immediates which exceed the range of a singed 32bit integer
Differential Revision: https://reviews.llvm.org/D28988
llvm-svn: 293030
Conservatively disable sinking and merging inline-asm instructions as doing so
can potentially create arguments that cannot satisfy the inline-asm constraints.
For example, SimplifyCFG used to do the following transformation:
(before)
if.then:
%0 = call i32 asm "rorl $2, $0", "=&r,0,n"(i32 %r6, i32 8)
br label %if.end
if.else:
%1 = call i32 asm "rorl $2, $0", "=&r,0,n"(i32 %r6, i32 6)
br label %if.end
(after)
%.sink = select i1 %tobool, i32 6, i32 8
%0 = call i32 asm "rorl $2, $0", "=&r,0,n"(i32 %r6, i32 %.sink)
This would result in a crash in the backend since only immediate integer operands
are permitted for constraint "n".
rdar://problem/30110806
Differential Revision: https://reviews.llvm.org/D29111
llvm-svn: 293025
clang already emits this with -cl-no-signed-zeros, but codegen
doesn't do anything with it. Treat it like the other fast math
attributes, and change one place to use it.
llvm-svn: 293024
Leave early ifcvt disabled for now since there are some
shader-db regressions.
This causes some immediate improvements, but could be better.
The cost checking that the pass does is based on critical path
length for out of order CPUs which we do not want so it skips out
on many cases we want.
llvm-svn: 293016
loops.
We do this by reconstructing the newly added loops after the unroll
completes to avoid threading pass manager details through all the mess
of the unrolling infrastructure.
I've enabled some extra assertions in the LPM to try and catch issues
here and enabled a bunch of unroller tests to try and make sure this is
sane.
Currently, I'm manually running loop-simplify when needed. That should
go away once it is folded into the LPM infrastructure.
Differential Revision: https://reviews.llvm.org/D28848
llvm-svn: 293011
This surprisingly isn't NFC because there are patterns to select GPR
sub to SUBSWrr (rather than SUBWrr/rs); SUBS is later optimized to
SUB if NZCV is dead. From ISel's perspective, both are fine.
llvm-svn: 293010
Summary:
When we decide that the result of the invoke instruction need to be spilled, we need to insert the spill into a block that is on the normal edge coming out of the invoke instruction. (Prior to this change the code would insert the spill immediately after the invoke instruction, which breaks the IR, since invoke is a terminator instruction).
In the following example, we will split the edge going into %cont and insert the spill there.
```
%r = invoke double @print(double 0.0) to label %cont unwind label %pad
cont:
%0 = call i8 @llvm.coro.suspend(token none, i1 false)
switch i8 %0, label %suspend [i8 0, label %resume
i8 1, label %cleanup]
resume:
call double @print(double %r)
```
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: mehdi_amini, llvm-commits, EricWF
Differential Revision: https://reviews.llvm.org/D29102
llvm-svn: 293006
There was a bug here where we were using p0 instead of s32 for the
selector type in the landingpad. Instead of hardcoding these types we
should get the types from the landingpad instruction directly.
Note that we replicate an assert from SDAG here to only support
two-valued landingpads.
llvm-svn: 292995
for CPU_SUBTYPE_ARM_V7S and CPU_SUBTYPE_ARM_V7K.
For these two cpusubtypes they should default to a cortex-a7 CPU
to give proper disassembly without a -mcpu= flag.
rdar://27431703
llvm-svn: 292993
The sequence like this:
v_cmpx_le_f32_e32 vcc, 0, v0
s_branch BB0_30
s_cbranch_execnz BB0_30
; BB#29:
exp null off, off, off, off done vm
s_endpgm
BB0_30:
; %endif110
is likely wrong. The s_branch instruction will unconditionally jump
to BB0_30 and the skip block (exp done + endpgm) inserted for
performing the kill instruction will never be executed. This results
in a GPU hang with Star Ruler 2.
The s_branch instruction is added during the "Control Flow Optimizer"
pass which seems to re-organize the basic blocks, and we assume
that SI_KILL_TERMINATOR is always the last instruction inside a
basic block. Thus, after inserting a skip block we just go to the
next BB without looking at the subsequent instructions after the
kill, and the s_branch op is never removed.
Instead, we should remove the unconditional out branches and let
skip the two instructions if the exec mask is non-zero.
This patch fixes the GPU hang and doesn't introduce any regressions
with "make check".
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99019
Patch by Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 292985
This switches to the workaround that HSA defaults to
for the mesa path.
This should be applied to the 4.0 branch.
Patch by Vedran Miletić <vedran@miletic.net>
llvm-svn: 292982
Summary: In iterative sample pgo where profile is collected from PGOed binary, we may see indirect call targets promoted and inlined in the profile. Before profile annotation, we need to make this happen in order to annotate correctly on IR. This patch explicitly promotes these indirect calls and inlines them before profile annotation.
Reviewers: xur, davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29040
llvm-svn: 292979
Reason: broke ASAN bots with a global buffer overflow.
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-fast/builds/2291
Each test contains 20-30K test cases but takes only several (from 4 to 10)
seconds to complete on average machine. The tests cover the majority of
AMDGPU Gfx7/Gfx8 instructions, including many dark corners, and intended
to quickly find out if something is broken.
llvm-svn: 292974
Summary:
GVNHoist performs all the optimizations that MLSM does to loads, in a
more general way, and in a faster time bound (MLSM is N^3 in most
cases, N^4 in a few edge cases).
This disables the load portion.
Note that the way ld_hoist_st_sink.ll is written makes one think that
the loads should be moved to the while.preheader block, but
1. Neither MLSM nor GVNHoist do it (they both move them to identical places).
2. MLSM couldn't possibly do it anyway, as the while.preheader block
is not the head of the diamond, while.body is. (GVNHoist could do it
if it was legal).
3. At a glance, it's not legal anyway because the in-loop load
conflict with the in-loop store, so the loads must stay in-loop.
I am happy to update the test to use update_test_checks so that
checking is tighter, just was going to do it as a followup.
Note that i can find no particular benefit to the store portion on any
real testcase/benchmark i have (even size-wise). If we really still
want it, i am happy to commit to writing a targeted store sinker, just
taking the code from the MemorySSA port of MergedLoadStoreMotion
(which is N^2 worst case, and N most of the time).
We can do what it does in a much better time bound.
We also should be both hoisting and sinking stores, not just sinking
them, anyway, since whether we should hoist or sink to merge depends
basically on luck of the draw of where the blockers are placed.
Nonetheless, i have left it alone for now.
Reviewers: chandlerc, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29079
llvm-svn: 292971
Regalloc creates COPY instructions which do not formally use VALU.
That results in v_mov instructions displaced after exec mask modification.
One pass which do it is SIOptimizeExecMasking, but potentially it can be
done by other passes too.
This patch adds a pass immediately after regalloc to add implicit exec
use operand to all VGPR copy instructions.
Differential Revision: https://reviews.llvm.org/D28874
llvm-svn: 292956
In order to follow the pattern of the existing 'slow-misaligned-128store'
option, rename the option 'no-quad-ldst-pairs' to 'slow-paired-128'.
llvm-svn: 292954
Also fixes a much worse bug where we emitted the wrong gap size for the
def range uncovered by the test for this issue.
Fixes PR31726.
llvm-svn: 292949
The comment talked about replacing vpmovzxwd+vpslld+vpsrad with vpmovsxwd - which isn't valid as we're sign extending a <8 x i1> bool vector not an all/nobits <8 x i16>
llvm-svn: 292948
Summary:
When conditional branches with complex conditions are split into
multiple branches in SelectionDAGBuilder::FindMergedConditions, also
handle inverted conditions. These may sometimes appear without having
been optimized by InstCombine when CodeGenPrepare decides to sink and
duplicate cmp instructions, causing them to have only one use. This
problem can be increased by e.g. GVNHoist hiding more cmps from
InstCombine by combining equivalent cmps from different blocks.
For example codegen X & !(Y | Z) as:
jmp_if_X TmpBB
jmp FBB
TmpBB:
jmp_if_notY Tmp2BB
jmp FBB
Tmp2BB:
jmp_if_notZ TBB
jmp FBB
Reviewers: bogner, MatzeB, qcolombet
Subscribers: llvm-commits, hiraditya, mcrosier, sebpop
Differential Revision: https://reviews.llvm.org/D28380
llvm-svn: 292944
a lazy-asserting PoisoningVH.
AssertVH is fundamentally incompatible with cache-invalidation of
analysis results. The invaliadtion happens after the AssertingVH has
already fired. Instead, use a PoisoningVH that will assert if the
dangling handle is ever used rather than merely be assigned or
destroyed.
This patch also removes all of the (numerous) doomed attempts to work
around this fundamental incompatibility. It is a pretty significant
simplification IMO.
The most interesting change is in the Inliner where we still do some
clearing because we don't want to rely on the coarse grained
invalidation strategy of the containing pass manager. However, I prefer
the approach that contains this logic to the cleanup phase of the
Inliner, and I think we could enhance the CGSCC analysis management
layer to make this even better in the future if desired.
The rest is straight cleanup.
I've also added a test for one of the harder cases to work around: when
a *module analysis* contains many AssertingVHes pointing at functions.
Differential Revision: https://reviews.llvm.org/D29006
llvm-svn: 292928
Each test contains 20-30K test cases but takes only several (from 4 to 10)
seconds to complete on average machine. The tests cover the majority of
AMDGPU Gfx7/Gfx8 instructions, including many dark corners, and intended
to quickly find out if something is broken.
llvm-svn: 292922
With this change dominator tree remains in sync after each step of loop
peeling.
Differential Revision: https://reviews.llvm.org/D29029
llvm-svn: 292895
Summary:
This teaches getNode to simplify extracting from Undef. This is similar to what is done for EXTRACT_VECTOR_ELT. It also adds support for extracting from CONCAT_VECTOR when we can reuse one of the inputs to the concat. These seem like simple non-target specific optimizations.
For X86 we currently handle undef in extractSubvector, but not all EXTRACT_SUBVECTOR creations go through there.
Ultimately, my motivation here is to simplify extractSubvector and remove custom lowering for EXTRACT_SUBVECTOR since we don't do anything but handle undef and BUILD_VECTOR optimizations, but those should be DAG combines.
Reviewers: RKSimon, delena
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29000
llvm-svn: 292876
A register unit may be allocatable and non-reserved but some of the
register(tuples) built with it are reserved. We still need to calculate
liveness in this case.
Note to out of tree targets: If you start seeing machine verifier errors
with this commit, it probably means that you do not properly mark super
registers of reserved register as reserved. See for example r292836 or
r292870 for example on how to fix that.
rdar://29996737
Differential Revision: https://reviews.llvm.org/D28881
llvm-svn: 292871
Running non-LCSSA-preserving LoopSimplify followed by LCSSA on (roughly) the
same loop is incorrect, since LoopSimplify may break LCSSA arbitrarily higher
in the loop nest. Instead, run LCSSA first, and then run LCSSA-preserving
LoopSimplify on the result.
This fixes PR31718.
Differential Revision: https://reviews.llvm.org/D29055
llvm-svn: 292854
Summary:
This patch changes the layout of DoubleAPFloat, and adjust all
operations to do either:
1) (IEEEdouble, IEEEdouble) -> (uint64_t, uint64_t) -> PPCDoubleDoubleImpl,
then run the old algorithm.
2) Do the right thing directly.
1) includes multiply, divide, remainder, mod, fusedMultiplyAdd, roundToIntegral,
convertFromString, next, convertToInteger, convertFromAPInt,
convertFromSignExtendedInteger, convertFromZeroExtendedInteger,
convertToHexString, toString, getExactInverse.
2) includes makeZero, makeLargest, makeSmallest, makeSmallestNormalized,
compare, bitwiseIsEqual, bitcastToAPInt, isDenormal, isSmallest,
isLargest, isInteger, ilogb, scalbn, frexp, hash_value, Profile.
I could split this into two patches, e.g. use
1) for all operatoins first, then incrementally change some of them to
2). I didn't do that, because 1) involves code that converts data between
PPCDoubleDoubleImpl and (IEEEdouble, IEEEdouble) back and forth, and may
pessimize the compiler. Instead, I find easy functions and use
approach 2) for them directly.
Next step is to implement move multiply and divide from 1) to 2). I don't
have plans for other functions in 1).
Differential Revision: https://reviews.llvm.org/D27872
llvm-svn: 292839
in llvm-objdump for Mach-O files add the printing of the
x86_thread_state32_t in the same format as
otool-classic(1) on darwin.
To do this the 32-bit x86 general tread state
needed to be defined in include/llvm/Support/MachO.h .
rdar://30110111
llvm-svn: 292829
Since we're now avoiding operations using narrow scalar integer types,
we have to legalize the integer side of the FP conversions.
This requires teaching the legalizer how to do that.
llvm-svn: 292828
Since r279760, we've been marking as legal operations on narrow integer
types that have wider legal equivalents (for instance, G_ADD s8).
Compared to legalizing these operations, this reduced the amount of
extends/truncates required, but was always a weird legalization decision
made at selection time.
So far, we haven't been able to formalize it in a way that permits the
selector generated from SelectionDAG patterns to be sufficient.
Using a wide instruction (say, s64), when a narrower instruction exists
(s32) would introduce register class incompatibilities (when one narrow
generic instruction is selected to the wider variant, but another is
selected to the narrower variant).
It's also impractical to limit which narrow operations are matched for
which instruction, as restricting "narrow selection" to ranges of types
clashes with potentially incompatible instruction predicates.
Concerns were also raised regarding MIPS64's sign-extended register
assumptions, as well as wrapping behavior.
See discussions in https://reviews.llvm.org/D26878.
Instead, legalize the operations.
Should we ever revert to selecting these narrow operations, we should
try to represent this more accurately: for instance, by separating
a "concrete" type on operations, and an "underlying" type on vregs, we
could move the "this narrow-looking op is really legal" decision to the
legalizer, and let the selector use the "underlying" vreg type only,
which would be guaranteed to map to a register class.
In any case, we eventually should mitigate:
- the performance impact by selecting no-op extract/truncates to COPYs
(which we currently do), and the COPYs to register reuses (which we
don't do yet).
- the compile-time impact by optimizing away extract/truncate sequences
in the legalizer.
llvm-svn: 292827
This is a series of patches to enable adding of machine sched
models for ARM processors easier and compact. They define new
sched-readwrites for groups of ARM instructions. This has been
missing so far, and as a consequence, machine scheduler models
for individual sub-targets have tended to be larger than they
needed to be.
The current patch focuses on floating-point instructions.
Reviewers: Diana Picus (rovka), Renato Golin (rengolin)
Differential Revision: https://reviews.llvm.org/D28194
llvm-svn: 292825
Summary:
Add a new load command LC_BUILD_VERSION. It is a generic version of
LC_*_VERSION_MIN load_command used on Apple platforms. Instead of having
a seperate load command for each platform, LC_BUILD_VERSION is recording
platform info as an enum. It also records SDK version, min_os, and tools
that used to build the binary.
rdar://problem/29781291
Reviewers: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29044
llvm-svn: 292824
Summary:
Next round of extra tests for MSSA.
I have a prototype invariant.group handling implementation
that fixes all the FIXMEs, and I think it will be
easier to see what is the difference if I firstly
post this, and then only fix fixits.
Reviewers: george.burgess.iv, dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29022
llvm-svn: 292797
bots ever since d0k fixed the CHECK lines so that it did something at
all.
It isn't actually testing SCEV directly but LSR, so move it into LSR and
the x86-specific tree of tests that already exists there. Target
dependence is common and unavoidable with the current design of LSR.
llvm-svn: 292774
invalidation of deleted functions in GlobalDCE.
This was always testing a bug really triggered in GlobalDCE. Right now
we have analyses with asserting value handles into IR. As long as those
remain, when *deleting* an IR unit, we cannot wait for the normal
invalidation scheme to kick in even though it was designed to work
correctly in the face of these kinds of deletions. Instead, the pass
needs to directly handle invalidating the analysis results pointing at
that IR unit.
I've tought the Inliner about this and this patch teaches GlobalDCE.
This will handle the asserting VH case in the existing test as well as
other issues of the same fundamental variety. I've moved the test into
the GlobalDCE directory and added a comment explaining what is going on.
Note that we cannot simply require LVI here because LVI is too lazy.
llvm-svn: 292773
While this is covered by a clang test case, we should have something
locally to LLVM that immediately checks the inliner doesn't leave
analyses to dangling IR bodies.
llvm-svn: 292772
become unavailable.
The AssumptionCache is now immutable but it still needs to respond to
DomTree invalidation if it ended up caching one.
This lets us remove one of the explicit invalidates of LVI but the
other one continues to avoid hitting a latent bug.
llvm-svn: 292769
Add the `--strip-underscore` option to llvm-cxxfilt to strip the leading
underscore. This is useful for when dealing with targets which add a
leading underscore.
llvm-svn: 292759
new PM's inliner.
The bug happens when we refine an SCC after having computed a proxy for
the FunctionAnalysisManager, and then proceed to compute fresh analyses
for functions in the *new* SCC using the manager provided by the old
SCC's proxy. *And* when we manage to mutate a function in this new SCC
in a way that invalidates those analyses. This can be... challenging to
reproduce.
I've managed to contrive a set of functions that trigger this and added
a test case, but it is a bit brittle. I've directly checked that the
passes run in the expected ways to help avoid the test just becoming
silently irrelevant.
This gets the new PM back to passing the LLVM test suite after the PGO
improvements landed.
llvm-svn: 292757
Summary:
This test had a bug: !llvm.invariant.group instead
of !invariant.group.
Also add some new test for future development.
All tests passes, when MSSA will support invariant.group
only the lines with FIXIT should be changed.
Reviewers: dberlin, george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28969
llvm-svn: 292730
We may be able to assert that no shl-shl or lshr-lshr pairs ever get here
because we should have already handled those in foldShiftedShift().
llvm-svn: 292726
This adds the last remaining core feature of the loop pass pipeline in
the new PM and removes the last of the really egregious hacks in the
LICM tests.
Sadly, this requires really substantial changes in the unittests in
order to provide and maintain simplified loops. This is particularly
hard because for example LoopSimplify will try to fold undef branches to
an ideal direction and simplify the loop accordingly.
Differential Revision: https://reviews.llvm.org/D28766
llvm-svn: 292709
Summary:
Under option -mergefunc-preserve-debug-info we:
- Do not create a new function for a thunk.
- Retain the debug info for a thunk's parameters (and associated
instructions for the debug info) from the entry block.
Note: -debug will display the algorithm at work.
- Create debug-info for the call (to the shared implementation) made by
a thunk and its return value.
- Erase the rest of the function, retaining the (minimally sized) entry
block to create a thunk.
- Preserve a thunk's call site to point to the thunk even when both occur
within the same translation unit, to aid debugability. Note that this
behaviour differs from the underlying -mergefunc implementation which
modifies the thunk's call site to point to the shared implementation
when both occur within the same translation unit.
Reviewers: echristo, eeckstein, dblaikie, aprantl, friss
Reviewed By: aprantl
Subscribers: davide, fhahn, jfb, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D28075
llvm-svn: 292702
Summary:
Specifically, we upgrade llvm.nvvm.:
* brev{32,64}
* clz.{i,ll}
* popc.{i,ll}
* abs.{i,ll}
* {min,max}.{i,ll,u,ull}
* h2f
These either map directly to an existing LLVM target-generic
intrinsic or map to a simple LLVM target-generic idiom.
In all cases, we check that the code we generate is lowered to PTX as we
expect.
These builtins don't need to be backfilled in clang: They're not
accessible to user code from nvcc.
Reviewers: tra
Subscribers: majnemer, cfe-commits, llvm-commits, jholewinski
Differential Revision: https://reviews.llvm.org/D28793
llvm-svn: 292694
Summary:
Currently we return undef, but we're in the process of changing the
LangRef so that llvm.sqrt behaves like the other math intrinsics,
matching the return value of the standard libcall but not setting errno.
This change is legal even without the LangRef change because currently
calling llvm.sqrt(x) where x is negative is spec'ed to be UB. But in
practice it's also safe because we're simply constant-folding fewer
inputs: Inputs >= -0 get constant-folded as before, but inputs < -0 now
aren't constant-folded, because ConstantFoldFP aborts if the host math
function raises an fp exception.
Reviewers: hfinkel, efriedma, sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28929
llvm-svn: 292692
Newer ppc supports unaligned memory access, it reduces the cost of unaligned memory access significantly. This patch handles this case in PPCTTIImpl::getMemoryOpCost.
This patch fixes pr31492.
Differential Revision: https://reviews.llvm.org/D28630
llvm-svn: 292680
This adds the following to the new PM based inliner in PGO mode:
* Use block frequency analysis to derive callsite's profile count and use
that to adjust thresholds of hot and cold callsites.
* Incrementally update the BFI of the caller after a callee gets inlined
into it. This incremental update is only within an invocation of the run
method - BFI is not preserved across calls to run.
Update the function entry count of the callee after inlining it into a
caller.
* I've tuned the thresholds for the hot and cold callsites using a hacked
up version of the old inliner that explicitly computes BFI on a set of
internal benchmarks and spec. Once the new PM based pipeline stabilizes
(IIRC Chandler mentioned there are known issues) I'll benchmark this
again and adjust the thresholds if required.
Inliner PGO support.
Differential revision: https://reviews.llvm.org/D28331
llvm-svn: 292666
Matt Arsenault