This commit makes FileCheck print all CHECK-NOT directive failure in a
CHECK-NOT block even if one fails. Prior to that, it would stop trying
to match CHECK-NOT directive as soon as one in the block fails.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D86315
Substitutions are already reported in the diagnostics appearing before
the input dump in the case of failed directives, and they're reported
in traces (produced by `-vv -dump-input=never`) in the case of
successful directives. However, those reports are not always
convenient to view while investigating the input dump, so this patch
adds the substitution report to the input dump too. For example:
```
$ cat check
CHECK: hello [[WHAT:[a-z]+]]
CHECK: [[VERB]] [[WHAT]]
$ FileCheck -vv -DVERB=goodbye check < input |& tail -8
<<<<<<
1: hello world
check:1 ^~~~~~~~~~~
2: goodbye word
check:2'0 X~~~~~~~~~~~ error: no match found
check:2'1 with "VERB" equal to "goodbye"
check:2'2 with "WHAT" equal to "world"
>>>>>>
```
Without this patch, the location reported for a substitution for a
directive match is the directive's full match range. This location is
misleading as it implies the substitution itself matches that range.
This patch changes the reported location to just the match range start
to suggest the substitution is known at the start of the match. (As
in the above example, input dumps don't mark any range for
substitutions. The location info in that case simply identifies the
right line for the annotation.)
Reviewed By: mehdi_amini, thopre
Differential Revision: https://reviews.llvm.org/D83650
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support for specifying the
matching constraint for a numeric expression, ie. how the value being
matched should relate to the numeric expression.
This commit only adds the equality constraint where the numeric value
matched must be equal to the numeric expression. It is the default
matching constraint used when not specified. It is added to provision
other matching constraint (e.g. inequality relations).
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D60391
This patch extends numerical expressions to allow calls to
predefined functions. These calls can be combined with the
existing numerical operators, which includes nesting calls.
The call syntax is:
<func>(<args>)
Where <func> is a predefined string literal, currently limited to
one of add, max, min and sub. <arg> is a comma seperated list of
numerical expressions.
Subscribers: arichardson, hiraditya, thopre, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79936
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support signed numeric
values, thus allowing negative numeric values.
As such, the patch adds a new class to represent a signed or unsigned
value and add the logic for type promotion and type conversion in
numeric expression mixing signed and unsigned values. It also adds
the %d format specifier to represent signed value.
Finally, it also adds underflow and overflow detection when performing a
binary operation.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson
Reviewed By: jhenderson, arichardson
Subscribers: MaskRay, hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60390
With this change it is be possible to write FileCheck expressions such
as [[#(VAR+1)-2]]. Currently, the only supported arithmetic operators are
plus and minus, so this is not particularly useful yet. However, it our
CHERI fork we have tests that benefit from having multiplication in
FileCheck expressions. Allowing parenthesized expressions is the simplest
way for us to work around the current lack of operator precedence in
FileCheck expressions.
Reviewed By: thopre, jhenderson
Differential Revision: https://reviews.llvm.org/D77383
D79276 caused the following builder to fail:
http://lab.llvm.org:8011/builders/llvm-clang-x86_64-expensive-checks-win/builds/23489
Specifically, FileCheck dumped stack in the following tests:
LLVM :: MC/Mips/micromips-jump-pc-region.s
LLVM :: MC/Mips/mips-jump-pc-region.s
Those tests contained characters encoded as 160 but that render (at
least for me in vim) like a single space (32). Those characters
appeared between the `#` and `RUN:` on several lines, and D79276
caused FileCheck to process those lines differently: `RUN:` is a
comment directive. As a result, D79276 caused FileCheck to start
calling is `isalnum` on those characters.
The problem is that FileCheck calls `isalnum` on type `char` without
casting to `unsigned char` first, so it sign-extends 160 beyond what
`unsigned char` or `EOF` can represent. C says that has undefined
behavior. This problem is general to FileCheck's prefix parsing and
so exists independently of D79276.
524457edbc fixed the above tests. This patch changes FileCheck to
use LLVM's replacements for `ctype.h` functions, and it adds tests for
cases that are representative with or without D79276.
Reviewed By: jhenderson, thopre, efriedma
Differential Revision: https://reviews.llvm.org/D79810
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
This will prove especially helpful after D79276, which introduces
comment prefixes. Specifically, identifying whether there's a
uniqueness violation will be helpful as prefixes will be required to
be unique across both check prefixes and comment prefixes.
Also, remove a related comment about `cl::list` that no longer seems
relevant now that FileCheck is also a library.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79375
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
This will prove especially helpful after D79276, which introduces
comment prefixes. Specifically, identifying whether there's a
uniqueness violation will be helpful as prefixes will be required to
be unique across both check prefixes and comment prefixes.
Also, remove a related comment about `cl::list` that no longer seems
relevant now that FileCheck is also a library.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79375
There are few `std::vector<std::string>` members in
`FileCheckRequest`. This patch changes these arrays to `std::vector<StringRef>`
and refactors the code related to cleanup/improve/simplify it.
Differential revision: https://reviews.llvm.org/D78202
Currently, `--dump-input` implies that all `--implicit-check-not`
patterns appear on line 1 by printing annotations like:
```
1: foo bar baz
not:1 !~~ error: no match expected
```
This patch changes that to:
```
1: foo bar baz
not:imp1 !~~ error: no match expected
```
`imp1` indicates the first `--implicit-check-not` pattern.
Reviewed By: thopre
Differential Revision: https://reviews.llvm.org/D77605
Imagine we have the following invocation:
`FileCheck -check-prefix=UNKNOWN-PREFIX -implicit-check-not=something`
When the check prefix does not exist it does not fail.
This patch fixes the issue.
Differential revision: https://reviews.llvm.org/D78024
Summary:
Improve error message in case of conflict between several implicit
format to mention the operand that conflict.
Reviewers: jhenderson, jdenny, probinson, grimar, arichardson, rnk
Reviewed By: jdenny
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77741
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support for selecting a
matching format to match a numeric value against (ie. decimal, hex lower
case letters or hex upper case letters).
This commit allows to select what format a numeric value should be
matched against. The following formats are supported: decimal value,
lower case hex value and upper case hex value. Matching formats impact
both the format of numeric value to be matched as well as the format of
accepted numbers in a definition with empty numeric expression
constraint.
Default for absence of format is decimal value unless the numeric
expression constraint is non null and use a variable in which case the
format is the one used to define that variable. Conclict of format in
case of several variable being used is diagnosed and forces the user to
select a matching format explicitely.
This commit also enables immediates in numeric expressions to be in any
radix known to StringRef's GetAsInteger method, except for legacy
numeric expressions (ie [[@LINE+<offset>]] which only support decimal
immediates.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson
Reviewed By: jhenderson, arichardson
Subscribers: daltenty, MaskRay, hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60389
Summary:
When FileCheck was made a library, types in the public API were renamed
to add a FileCheck prefix, such as Pattern to FileCheckPattern. Many
types were moved into a private interface and thus don't need this
prefix anymore. This commit removes those unneeded prefixes.
Reviewers: jhenderson, jdenny, probinson, grimar, arichardson, rnk
Reviewed By: jhenderson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72186
The FileCheck utility is enhanced to support a `--ignore-case`
option. This is useful in cases where the output of Unix tools
differs in case (e.g. case not specified by Posix).
Reviewers: Bigcheese, jakehehrlich, rupprecht, espindola, alexshap, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D68146
llvm-svn: 374538
The FileCheck utility is enhanced to support a `--ignore-case`
option. This is useful in cases where the output of Unix tools
differs in case (e.g. case not specified by Posix).
Reviewers: Bigcheese, jakehehrlich, rupprecht, espindola, alexshap, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D68146
llvm-svn: 374339
Summary:
Most of the class definition in llvm/include/llvm/Support/FileCheck.h
are actually implementation details that should not be relied upon. This
commit moves all of it in a new header file under
llvm/lib/Support/FileCheck. It also takes advantage of the code movement
to put the code into a new llvm::filecheck namespace.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67649
llvm-svn: 373395
Summary:
Remove use of FileCheckPatternContext and FileCheckString concrete types
from FileCheck API to allow moving it and the other implementation only
only declarations into a private header file.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68186
llvm-svn: 373211
Summary:
The Regex "match" and "sub" member functions were previously not "const"
because they wrote to the "error" member variable. This commit removes
those assignments, and instead assumes that the validity of the regex
is already known after the initial compilation of the regular
expression. As a result, these member functions were possible to make
"const". This makes it easier to do things like pre-compile Regexes
up-front, and makes "match" and "sub" thread-safe. The error status is
now returned as an optional output, which also makes the API of "match"
and "sub" more consistent with each other.
Also, some uses of Regex that could be refactored to be const were made const.
Patch by Nicolas Guillemot
Reviewers: jankratochvil, thopre
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67241
llvm-svn: 372764
Summary:
Commit r366897 introduced the possibility to set a variable from an
expression, such as [[#VAR2:VAR1+3]]. While introducing this feature, it
introduced extra logic to allow using such a variable on the same line
later on. Unfortunately that extra logic is flawed as it relies on a
mapping from variable to expression defining it when the mapping is from
variable definition to expression. This flaw causes among other issues
PR42896.
This commit avoids the problem by forbidding all use of a variable
defined on the same line, and removes the now useless logic. Redesign
will be done in a later commit because it will require some amount of
refactoring first for the solution to be clean. One example is the need
for some sort of transaction mechanism to set a variable temporarily and
from an expression and rollback if the CHECK pattern does not match so
that diagnostics show the right variable values.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66141
llvm-svn: 370663
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
> llvm-svn: 366860
llvm-svn: 366897
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
llvm-svn: 366860
Summary:
Commit r365249 changed usage of FileCheckNumericVariable to have one
instance of that class per variable as opposed to one instance per
definition of a given variable as was done before. However, it retained
the safety check in setValue that it should only be called with the
variable unset, even after r365625.
However this causes assert failure when a non-pseudo variable is being
redefined. And while redefinition of @LINE at each CHECK line work in
the general case, it caused problem when a substitution failed (fixed in
r365624) and still causes problem when a CHECK line does not match since
@LINE's value is cleared after substitutions in match() happened but
printSubstitutions also attempts a substitution.
This commit solves the root of the problem by changing setValue to set a
new value regardless of whether a value was set or not, thus fixing all
the aforementioned issues.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64882
llvm-svn: 366434
Summary:
Processing of command-line definition of variable and logic around
implicit not directives both reuse parsing code that expects a line
number to be defined. So far, a special line number of 0 was used for
those users of the parsing code where a line number does not make sense.
This commit instead represents line numbers as Optional values so that
they can be None for those cases.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64639
llvm-svn: 366109
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch extend numeric expression to
support an arbitrary number of operands, either variable or literals.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60387
llvm-svn: 366001
Summary:
This patch simplifies 2 aspects in the FileCheckNumericVariable code.
First, setValue() method is turned into a void function since being
called only on undefined variable is an invariant and is now asserted
rather than returned. This remove the assert from the callers.
Second, clearValue() method is also turned into a void function since
the only caller does not check its return value since it may be trying
to clear the value of variable that is already cleared without this
being noteworthy.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64231
> llvm-svn: 365249
llvm-svn: 365625
Summary:
The value of the FileCheckNumericVariable class instance representing
the @LINE numeric variable is set and cleared respectively before and
after substitutions are made, if any. However, when a substitution
fails, the value is not cleared. This causes the next substitution of
@LINE later on to give the wrong value since setValue is a nop if the
value is already set. This is what caused failures after commit r365249.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64449
llvm-svn: 365624
Summary:
This patch simplifies 2 aspects in the FileCheckNumericVariable code.
First, setValue() method is turned into a void function since being
called only on undefined variable is an invariant and is now asserted
rather than returned. This remove the assert from the callers.
Second, clearValue() method is also turned into a void function since
the only caller does not check its return value since it may be trying
to clear the value of variable that is already cleared without this
being noteworthy.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64231
llvm-svn: 365249
Summary:
This patch changes expression support to use one instance of
FileCheckNumericVariable per numeric variable rather than one per
variable and per definition. The current system was only necessary for
the last patch of the numeric expression support patch series in order
to handle a line using a variable defined earlier on the same line from
the input text. However this can be dealt more efficiently.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64229
llvm-svn: 365220
Summary:
Diagnosing use of undefined variables takes place in
parseNumericVariableUse() and printSubstitutions() for numeric variables
but only takes place in printSubstitutions() for string variables. The
reason for the split location of diagnostics is that parsing is not
aware of the clearing of variables due to --enable-var-scope and thus
use of variables cleared in this way can only be catched by
printSubstitutions().
Beyond the code level inconsistency, there is also a user facing
inconsistency since diagnostics look different between the two
functions. While the diagnostic in printSubstitutions is more verbose,
doing the diagnostic there allows to diagnose all undefined variables
rather than just the first one and error out.
This patch create dummy variable definition when encountering a use of
undefined variable so that parsing can proceed and be diagnosed by
printSubstitutions() later. Tests that were testing whether parsing
fails in such case are thus modified accordingly.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64228
llvm-svn: 365219
Summary:
Comment explaining the interaction between parsing of numeric variable
definition and uses in parseNumericVariableUse is stale since it
suggests both use and definition parsing is done in the same function.
This was the case in a previous version of the patch committed as
71d3f227a7 but is no longer the case. This
patch updates the comment accordingly.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64227
llvm-svn: 365192
Thomas Preud'homme