Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.
Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.
TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.
Re-apply r187609 with fix to pass ocaml binding. vmcore.ml generates a debug
location with scope being metadata !{}, in verifier we treat this as a null
scope.
llvm-svn: 187812
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.
Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.
TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.
llvm-svn: 187609
Also always add DIType, DISubprogram and DIGlobalVariable to the list
in DebugInfoFinder without checking them, so we can verify them later
on.
llvm-svn: 187285
We used to call Verify before adding DICompileUnit to the list, and now we
remove the check and always add DICompileUnit to the list in DebugInfoFinder,
so we can verify them later on.
llvm-svn: 187237
Make sure the context and type fields are MDNodes. We will generate
verification errors if those fields are non-empty strings.
Fix testing cases to make them pass the verifier.
llvm-svn: 187106
MDNodes used by DbgDeclareInst and DbgValueInst.
Another 16 testing cases failed and they are disabled with
-disable-debug-info-verifier.
A total of 34 cases are disabled with -disable-debug-info-verifier and will be
corrected.
llvm-svn: 186902
Simplify DIxxx:Verify to not call Verify on an operand. Instead, we use
DebugInfoFinder to list all MDNodes that should be a DIScope and all MDNodes
that should be a DIType and we will call Verify on those lists.
llvm-svn: 186737
1> Use DebugInfoFinder to find debug info MDNodes.
2> Add disable-debug-info-verifier to disable verifying debug info.
3> Disable verifying for testing cases that fail (will update the testing cases
later on).
4> MDNodes generated by clang can have empty filename for TAG_inheritance and
TAG_friend, so DIType::Verify is modified accordingly.
Note that DebugInfoFinder does not list all debug info MDNode.
For example, clang can generate:
metadata !{i32 786468}, which will fail to verify.
This MDNode is used by debug info but not included in DebugInfoFinder.
This MDNode is generated as a temporary node in DIBuilder::createFunction
Value *TElts[] = { GetTagConstant(VMContext, DW_TAG_base_type) };
MDNode::getTemporary(VMContext, TElts)
llvm-svn: 186634
We were being a bit too aggresive here in classifying global variables
with no global reference or constant value to be invalid - this would
cause LLVM to not emit the DWARF description of the global variable if
it had been optimized away, which isn't helpful for users who might
benefit from the global variable's description even if there's no
location information.
This also fixes a crasher issue here that I was unable to reduce a test
case for - involving a using decl (& subsequent
DW_TAG_imported_declaration ) of such a global variable that, once
optimized away, would crash when an attempt to emit the imported
declaration was made.
llvm-svn: 185675
No functionality change.
It should suffice to check the type of a debug info metadata, instead of
calling Verify. For cases where we know the type of a DI metadata, use
assert.
llvm-svn: 185249
This resolves the last of the PR14606 failures in the GDB 7.5 test
suite by implementing an optional name field for
DW_TAG_imported_modules/DIImportedEntities and using that to implement
C++ namespace aliases (eg: "namespace X = Y;").
llvm-svn: 182328
This is only tested for global variables at the moment (& includes tests
for the unnamed parameter case, since apparently this entire function
was completely untested previously)
llvm-svn: 181632
- requires existing debug information to be present
- fixes up file name and line number information in metadata
- emits a "<orig_filename>-debug.ll" succinct IR file (without !dbg metadata
or debug intrinsics) that can be read by a debugger
- initialize pass in opt tool to enable the "-debug-ir" flag
- lit tests to follow
llvm-svn: 181467
DIBuilder::createImportedDeclaration isn't fully plumbed through (note,
lacking in AsmPrinter/DwarfDebug support) but this seemed like a
sufficiently useful division of code to make the subsequent patch(es)
easier to follow.
llvm-svn: 181364
This reverts commit r179840 with a fix to test/DebugInfo/two-cus-from-same-file.ll
I'm not sure why that test only failed on ARM & MIPS and not X86 Linux, even
though the debug info was clearly invalid on all of them, but this ought to fix
it.
llvm-svn: 179996
Adding another CU-wide list, in this case of imported_modules (since they
should be relatively rare, it seemed better to add a list where each element
had a "context" value, rather than add a (usually empty) list to every scope).
This takes care of DW_TAG_imported_module, but to fully address PR14606 we'll
need to expand this to cover DW_TAG_imported_declaration too.
llvm-svn: 179836
This reverts commit 342d92c7a0adeabc9ab00f3f0d88d739fe7da4c7.
Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.
llvm-svn: 178215
This is just the basic groundwork for supporting DW_TAG_imported_module but I
wanted to commit this before pushing support further into Clang or LLVM so that
this rather churny change is isolated from the rest of the work. The major
churn here is obviously adding another field (within the common DIScope prefix)
to all DIScopes (files, classes, namespaces, lexical scopes, etc). This should
be the last big churny change needed for DW_TAG_imported_module/using directive
support/PR14606.
llvm-svn: 178099
This will be used to factor out some uses of magic number operand offsets
inside Clang where these fields were updated in an effort to resolve forward
declarations/circular references.
llvm-svn: 178078
This makes DIType's first non-tag parameter the same as DIFile's, allowing them
to both share the common implementation of getFilename/getDirectory in DIScope.
llvm-svn: 177467
This is the first step to making all DIScopes have a common metadata prefix (so
that things (using directives, for example) that can appear in any scope can be
added to that common prefix). DIFile is itself a DIScope so the common prefix
of all DIScopes cannot be a DIFile - instead it's the raw filename/directory
name pair.
llvm-svn: 177239
This is the next step towards making the metadata for DIScopes have a common
prefix rather than having to delegate based on their tag type.
llvm-svn: 176913
This could be 'null' or the empty string, DIDescriptor::getStringField
coalesces the two cases anyway so it's just a matter of legible/efficient
representation.
The change in behavior of the DICompileUnit::get* functions could be
subsumed by the full verification check - but ideally that should just be an
assertion if we could front-load the actual debug info metadata failure paths.
llvm-svn: 176907
Versioned debug info support has been a burden to maintain & also compromised
current debug info verification by causing test cases testing old debug info to
remain rather than being updated to the latest. It also makes it hard to add or
change the metadata schema by requiring various backwards-compatibility in the
DI* hierarchy.
So it's being removed in preparation for new changes to the schema to tidy up
old/unnecessary fields and add new fields needed for new debug info (well, new
to LLVM at least).
The more surprising part of this is the changes to DI*::Verify - this became
necessary due to the changes to AsmWriter. AsmWriter was relying on the version
test to decide which bits of metadata were actually debug info when printing
the comment annotations. Without the version information the tag numbers were
too common & it would print debug info on random metadata that happened to
start with an integer that matched a tag number. Instead this change makes the
Verify functions more precise (just adding "number of operands" checks - not
type checking those operands yet) & relies on that to decide which metadata is
debug info metadata.
llvm-svn: 176838
The main lists of debug info metadata attached to the compile_unit had an extra
layer of metadata nodes they went through for no apparent reason. This patch
removes that (& still passes just as much of the GDB 7.5 test suite). If anyone
can show evidence as to why these extra metadata nodes are there I'm open to
reverting this patch & documenting why they're there.
llvm-svn: 174266
We weren't encoding boolean constants correctly due to modeling boolean as a
signed type & then sign extending an i1 up to a byte & getting 255.
llvm-svn: 172926
This works fine with GDB for member variable pointers, but GDB's support for
member function pointers seems to be quite unrelated to
DW_TAG_ptr_to_member_type. (see GDB bug 14998 for details)
llvm-svn: 171698
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
Aside from moving the actual files, this patch only updates the build
system and the source file comments under lib/... that are relevant.
I'll be updating other docs and other files in smaller subsequnet
commits.
While I've tried to test this, but it is entirely possible that there
will still be some build system fallout.
Also, note that I've not changed the library name itself: libLLVMCore.a
is still the library name. I'd be interested in others' opinions about
whether we should rename this as well (I think we should, just not sure
what it might break)
llvm-svn: 171359
Manman Ren