GNU ld allows sections after a non-SHF_ALLOC section to be covered by PT_LOAD
(PR37607) and assigns addresses to non-SHF_ALLOC output sections (similar to
SHF_ALLOC NOBITS sections. The location counter is not advanced).
This patch tries to fix PR37607 (remove a special case in
`Writer<ELFT>::createPhdrs`). To make the created PT_LOAD meaningful, we cannot
reset dot to 0 for a middle non-SHF_ALLOC output section. This results in
removal of two special cases in LinkerScript::assignOffsets. Non-SHF_ALLOC
non-orphan sections can have non-zero addresses like in GNU ld.
The zero address rule for non-SHF_ALLOC sections is weakened to apply to orphan
only. This results in a special case in createSection and findOrphanPos, respectively.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85100
SVE is not required, it has its own test. Note that
there is no "+neon" so "+simd" is used instead.
Also rename the file to match the name of the corefile
it produces.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D85134
Recently added TestTargetAPI.py test "test_launch_simple" is failing on
Arm/AArch64 Linux targets. Putting them to skip until fixed.
Differential Revision: https://reviews.llvm.org/D85235
Use the same functionality as the non-gui mode, the colors just
need translating to curses colors.
Differential Revision: https://reviews.llvm.org/D85145
Without this, sources with long lines or variable names may overwrite
panel frames, or even overrun to the following line. There's currently
no way to scroll left/right in the views, so that should be added
to handle these cases.
This commit includes fixing constness of some Window functions,
and also makes PutCStringTruncated() consistent with the added
printf-like variant to take the padding as the first argument (can't
add it after the format to the printf-like function).
Differential Revision: https://reviews.llvm.org/D85123
Currently, the skipIfRosetta decorator will skip tests with the message
"not on macOS" on all platforms that are not `darwin` or `macosx`.
Instead, it should only check the platform and architecture when running
on these platforms.
This triggers for example when running the test suite on device.
Differential revision: https://reviews.llvm.org/D85388
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
This patch modifies the skipIfRemote decorator so it can apply to a
whole class, which allows us to skip all PExpect tests as a whole.
Differential revision: https://reviews.llvm.org/D85365
`getCompilerVersion` assumes that `clang --version` prints out a string like `version [0-9\.]+`.
If clang is built from trunk, the version line might look like `clang version trunk (123abc)`.
Since there isn't any way of knowing by the commit id alone whether one commit is newer or older than another git commit (or clang version), assume that clang with a version id like this is very close to trunk. For example, any tests with `@skipIf(compiler="clang", compiler_version=['<', '8'])` should be run.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D85248
LLDB tests assume that tests are in the test tree (the `LLDB_TEST_SRC` env variable, configured by `dotest.py`).
If this assertion doesn't hold, tests fail in strange ways. An early place this goes wrong is in `compute_mydir` which does a simple length-based substring to get the relative path. Later, we use that path to chdir to. If the test file and test tree don't agree in realpath-ness (and therefore length), this will be a cryptic error of chdir-ing to a directory that does not exist.
The actual discrepency is that the places we look for `use_lldb_suite.py` don't use a realpath, but `dotest.py` does (see initialization of `configuration.testdirs`).
It doesn't particularly matter whether we use realpath or abspath to canonicalize things, but many places end up with implicit dependencies on the canonicalized pwd being a realpath, so make them realpath consistently. Also, in the `compute_mydir` method mentioned, raise an error if the path types don't agree.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D85258
Add an option that allows the user to decide to not make the inferior is
responsible for its own TCC permissions. If you don't make the inferior
responsible, it inherits the permissions of its parent. The motivation
is the scenario of running the LLDB test suite from an external hard
drive. If the inferior is responsible, every test needs to be granted
access to the external volume. When the permissions are inherited,
approval needs to be granted only once.
Differential revision: https://reviews.llvm.org/D85237
Currently SBTarget::LaunchSimple creates a new LaunchInfo which means it
ignores any target properties that have been set. Instead, it should
start from the target's LaunchInfo and populated the specified fields.
Differential revision: https://reviews.llvm.org/D85235
On Hexagon, breakpoints need to be on the first instruction of a packet.
When the LLVM disassembler for Hexagon returned 32 bit instructions, we
needed code to find the start of the current packet. Now that the LLVM
disassembler for Hexagon returns packets instead of instructions, we always
have the first instruction of the packet. Remove the packet traversal code
because it can cause problems when the next packet has more than one
instruction.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D84966
This quietly disabled use of zlib on Windows even when building with
-DLLVM_ENABLE_ZLIB=FORCE_ON.
> Rather than handling zlib handling manually, use find_package from CMake
> to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
> HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
> set to YES, which requires the distributor to explicitly select whether
> zlib is enabled or not. This simplifies the CMake handling and usage in
> the rest of the tooling.
>
> This is a reland of abb0075 with all followup changes and fixes that
> should address issues that were reported in PR44780.
>
> Differential Revision: https://reviews.llvm.org/D79219
This reverts commit 10b1b4a231 and follow-ups
64d99cc6ab and
f9fec0447e.
Between the time it was created and it was pushed upstream,
99451b4453 has moved the existing
gui gui tests to lldb/test, so move this one too.
And update it to contain TestGuiBasic.py changes since the time
when it was based on that test.
Differential Revision: https://reviews.llvm.org/D85106
It says it toggles breakpoints, so if one already exists
on the selected location, remove it instead of adding.
Differential Revision: https://reviews.llvm.org/D85098
My openSUSE 15.2 has /usr/include/curses.h as a symlink to
/usr/include/ncurses/curses.h , but there's no such symlink
for panel.h . Prefer using /usr/include/ncurses for the includes
if they are found there by the CMake check.
Differential Revision: https://reviews.llvm.org/D85219
This patch is similar in spirit to https://reviews.llvm.org/D84480,
but does the maccatalyst/macosx disambiguation. I also took the
opportunity to factor out the gdb-remote packet log scanning used by
several testcases into lldbutil functions.
rdar://problem/66059257
Differential Revision: https://reviews.llvm.org/D84576
lldb-platform contains a very minimal support for the qfProcessInfo
packet, only allowing the simplest query to get most of the testsuite
running, and returning very little information about the matched
processes.
When lldb cannot find source file thus IDE renders a disassembly view, add syntax highlighting for constants, registers and final line comments for better debugging experience.
The original plain disassembly view looks like:
{F12401687}
An ideal view is like the screenshot attached.
{F12401515}
In this diff, the mimeType is a kind of media type for formatting the content in the response to a source request. Elements in the disassembly view, like constants, registers and final line comments are colored for highlighting.
A built-in support in the VSCode IDE for syntax highlighting will identify the which mimeType to apply and render the disassembly view as expected.
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D84555
This is a followup to 817b3a6fe3a4452eb61a2503c8beaa7267ca0351: in `builder_base` we should use abspath, not realpath, because the name is significant.
This is used by test cases that use `@skipIf(compiler="clang", compiler_version=['<', <version>])`
Upstream the code for dealing with TCC introduced in macOS Mojave. This
will make the debuggee instead of the debugger responsible for the
privileges it needs.
Differential revision: https://reviews.llvm.org/D85217
In these two cases, use of `os.path.realpath` is problematic:
- The name of the compiler is significant [1] . For testing purposes, we might
provide a compiler called "clang" which is actually a symlink to some build
script (which does some flag processing before invoking the real clang). The
destination the symlink may not be called "clang", but we still want it to be
treated as such.
- When using a build system that puts build artifacts in an arbitrary build
location, and later creates a symlink for it (e.g. creates a
"<lldb root>/lldbsuite/test/dotest.py" symlinks that points to
"/build/artifact/<hash>/dotest.py"), looking at the realpath will not match
the "test" convention required here.
[1] See `Makefile.rules` in the lldb tree, e.g. we use different flags if the compiler is named "clang"
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D85175
Sometimes the decorator is used on a common function rather than the
test method, which can return a value. This fails with decorators that
use skipTestIfFn under the hood.
If the test suite is misconfigured when it's run (a bad regexp, wrong test directory, etc.), the test suite may not discover any tests. When this happens, the test runner exits happily because no tests failed:
```
Ran 0 tests in 0.000s
RESULT: PASSED (0 passes, 0 failures, 0 errors, 0 skipped, 0 expected failures, 0 unexpected successes)
```
Change this to return an error so the misconfiguration can be more easily detected. Verified that `lldb-dotest -p TestDoesNotExist.py` successfully fails.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D85169
The lldb test-suite on Windows reports a 'CLEANUP ERROR' when attempting to kill
an exited/detached process. This change makes ProcessWindows consistent with
the other processes which only log the error. After this change a number of
'CLEANUP ERROR' messages are now removed.
Differential Revision: https://reviews.llvm.org/D84957
I have made the DW_FORM_ref4 relative. One could also use relocated
DW_FORM_ref_addr instead.
Tested with:
echo 'void f(){}'|clang -o 1.o -c -Wall -g -x c -;./bin/clang -o 1 1.o ../llvm-monorepo/lldb/test/Shell/SymbolFile/DWARF/DW_TAG_GNU_call_site-DW_AT_low_pc.s;./bin/lldb --no-lldbinit ./1 -o r -o 'p p' -o exit
As is common with curses apps, this allows to redraw everything
in case something corrupts the screen. Apparently key modifiers
are difficult with curses (curses FAQ it "doesn't do that"),
thankfully Ctrl+key are simply control characters, so it's
(ascii & 037) => 12.
Differential Revision: https://reviews.llvm.org/D84972
On an iOS device, if debugserver is left to figure out how to launch
the binary provided, it looks at the filename to see if it contains
".app" and asks FrontBoard to launch it. However, if this is actually
a command line app with the characters ".app" in the name, it would
end up trying to launch that via the FrontBoard calls even though it
needed to be launched via posix_spawn. For instance, a command line
program called com.application.tester.
Jim suggested this patch where we only send binaries that end in ".app"
to FrontBoard.
Often debugsever is invoked with a --launch command line argument to
specify the launch method, and none of this code is hit in that
instance.
<rdar://problem/65297100>
This test was added in D74217 (and the `.categories` file later added in ccf1c30cde) around the same time I moved the test tree from `lldb/packages/Python/lldbsuite/test` to `lldb/test/API` (D71151). Since this got lost in the move, it isn't running. (I introduced an intentional syntax error, and `ninja check-lldb` passes).
I moved it to the correct location, and now it runs and passes -- locally, at least -- as `ninja check-lldb-api-tools-lldb-server-registers-target-xml-reading`.
Let's just return a std::string to make this safe. formatv seemed overkill for formatting
the return values as they all just append an integer value to a constant string.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D84505
Move the finish_swig logic into a function in the bindings directory. By
making this a function I can reuse the logic internally where we ship
two Python versions and therefore need to finish the bindings twice.
We saw a crash recently (rdar://problem/65276489) that looks related to an invalid ValueObjectSP in a summary providers in Cocoa.cpp e.g. NSBundleSummaryProvider(...).
This adds checks before we use them usually by calling NSStringSummaryProvider.
Differential Revision: https://reviews.llvm.org/D84272
'd' would be much better used for up/down shortcuts, and this also removes
the possibility of ruining the whole debugging session by accidentally
hitting 'd' or 'k'. Also change menu to have both 'detach and resume'
and 'detach suspended' to make it clear which one is which. See
discussion at https://reviews.llvm.org/D68541 .
Differential Revision: https://reviews.llvm.org/D68908
Both of BreakpointLocation and BreakpointSite were inherited from StoppointLocation. However, the only thing
they shared was hit counting logic. The patch encapsulates those logic into StoppointHitCounter, renames
StoppointLocation to StoppointSite, and stops BreakpointLocation's inheriting from it.
Differential Revision: https://reviews.llvm.org/D84527
Most process plugins (if not all) don't set hardware index for breakpoints. They even
are not able to determine this index.
This patch makes StoppointLocation::IsHardware pure virtual and lets BreakpointSite
override it using more accurate BreakpointSite::Type.
It also adds assertions to be sure that a breakpoint site is hardware when this is required.
Differential Revision: https://reviews.llvm.org/D84257
Currently, `target create` has no --platform option. However,
TargetList::CreateTargetInternal which is called under the hood, will
return an error when either no platform or multiple matching platforms
are found, saying that a platform should be specified with --platform.
This patch adds the platform option, but that doesn't solve either of
these errors.
- If more than one platform matches, specifying the platform isn't
going to fix that. The current code will only look at the
architecture instead. I've updated the error message to ask the user
to specify an architecture.
- If no architecture is found, specifying a new one via platform isn't
going to change that either because we already try to find one that
matches the given architecture.
Differential revision: https://reviews.llvm.org/D84809
Summary:
Initially, Apple simulator binarie triples didn't use a `-simulator`
environment and were just differentiated based on the architecture.
For example, `x86_64-apple-ios` would obviously be a simualtor as iOS
doesn't run on x86_64. With Catalyst, we made the disctinction
explicit and today, all simulator triples (even the legacy ones) are
constructed with an environment. This is especially important on Apple
Silicon were the architecture is not different from the one of the
simulated device.
This change makes the simulator part of the environment always part of
the criteria to detect whether 2 `ArchSpec`s are equal or compatible.
Reviewers: aprantl
Subscribers: inglorion, dexonsmith, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D84716
This way, downstream projects don't have to invoke find_package(ZLIB)
reducing the amount of boilerplate.
Differential Revision: https://reviews.llvm.org/D84691
This cleanup patch unifies all methods called GetByteSize() in the
ValueObject hierarchy to return an optional, like the methods in
CompilerType do. This means fewer magic 0 values, which could fix bugs
down the road in languages where types can have a size of zero, such
as Swift and C (but not C++).
Differential Revision: https://reviews.llvm.org/D84285
This re-lands the patch with bogus :m_byte_size(0) initalizations removed.
Summary:
This commit is somewhat NFC-ish today as the environment of triples
is not considered when comparing s if one of them is
not set (I plan to change that).
We have made simulator triples unambiguous these days, but the
simulator platforms still advertise triples without the
environment. This wasn't an issue when the sims ran only on
a very different architecure than the real device, but this
has changed with Apple Silicon.
This patch simplifies the way GetSupportedArchitectureAtIndex
is implemented for the sim platforms and adds the environment.
It also trivially adds support for Apple Silicon to those
platforms.
Reviewers: aprantl
Subscribers: lldb-commits
Summary: This way we can get rid of this 1024 char buffer workaround.
Reviewers: #lldb, labath
Reviewed By: labath
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D84528
Summary:
This effectively reverts r188124, which added code to handle
(DW_AT_)declarations of structures with some kinds of children as
definitions. The commit message claims this is a workaround for some
kind of debug info produced by gcc. However, it does not go into
specifics, so it's hard to reproduce or verify that this is indeed still a
problem.
Having this code is definitely a problem though, because it mistakenly
declares incomplete dwarf declarations to be complete. Both clang (with
-flimit-debug-info) and gcc (by default) generate DW_AT_declarations of
structs with children. This happens when full debug info for a class is
not emitted in a given compile unit (e.g. because of vtable homing), but
the class has inline methods which are used in the given compile unit.
In that case, the compilers emit a DW_AT_declaration of a class, but
add a DW_TAG_subprogram child to it to describe the inlined instance of
the method.
Even though the class tag has some children, it definitely does not
contain enough information to construct a full class definition (most
notably, it lacks any members). Keeping the class as incomplete allows
us to search for a real definition in other modules, helping the
-flimit-debug-info flow. And in case the definition is not found we can
display a error message saying that, instead of just showing an empty
struct.
Reviewers: clayborg, aprantl, JDevlieghere, shafik
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83302
The function didn't combine a large entry which overlapped several other
entries, if those other entries were not overlapping among each other.
E.g., (0,20),(5,6),(10,11) produced (0,20),(10,11)
Now it just produced (0,20).
This cleanup patch unifies all methods called GetByteSize() in the
ValueObject hierarchy to return an optional, like the methods in
CompilerType do. This means fewer magic 0 values, which could fix bugs
down the road in languages where types can have a size of zero, such
as Swift and C (but not C++).
Differential Revision: https://reviews.llvm.org/D84285
If a module has debug info, the size of debug symbol will be displayed after the Symbols Loaded Message for each module in the VScode modules view.{F12335461}
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D83731
Summary: If a module has debug info, the size of debug symbol will be displayed after the Symbols Loaded Message for each module in the VScode modules view.{F12335461}
Reviewers: wallace, clayborg
Reviewed By: wallace, clayborg
Subscribers: cfe-commits, aprantl, lldb-commits
Tags: #lldb, #clang
Differential Revision: https://reviews.llvm.org/D83731
Once we start the definition of an ObjCInterfaceDecl we won't attempt to ImportDeclContext
later on. Unlike RecordDecl case which uses DefinitionCompleter to force completeDefinition
we don't seem to have a similar mechanism for ObjCInterfaceDecl.
This fix was needed due to a bug we see in LLDB expression parsing where an initial expression
cause an ObjCInterfaceDecl to be defined and subsequent expressions during import do not call
ImportDeclContext and we can end up in a situation where ivars are imported out of order and not all ivars are imported.
Differential Revision: https://reviews.llvm.org/D83972
When a process is notified that modules got loaded, currently only
existing language runtimes are given a chance to deal with that. This
means that if the runtime for a given language wasn't needed before it
won't be informed of the module chance.
This is wrong because the module change might be what triggers the need
for a certain runtime. Instead, we should give the language runtime for
every supported language a chance to deal with the modified modules.
Differential revision: https://reviews.llvm.org/D84475
This patch basically moves the disambiguation code from a place where
it was complicated to implement straight to where the load command is
parsed, which has the neat side affect of actually supporting all call
sites!
rdar://problem/66011909
Differential Revision: https://reviews.llvm.org/D84480
Summary:
The resolver addresses stored in the dyld trie are relative to the base
of the __TEXT segment. This is usually 0 in a dylib, so this was never
noticed, but it is not 0 for most dylibs integrated in the shared cache.
As we started using the shared cache images recently as symbol source,
this causes LLDB to fail to resolve symbols which go through a runtime
resolver.
Reviewers: jasonmolenda, jingham
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D84083
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
ConstString is essentially trivially copyable yet it has a user defined
copy constructor that copies its one member pointer. Remove it so it
qualifies as trivial in the eyes of the compiler.
This also fixes two unused variable warnings now that the compiler knows
that the constructor has no side-effects.
Differential revision: https://reviews.llvm.org/D84440
Summary:
The `string_escape` encoding used here was removed in Python 3 which makes the
test crash during tearDown:
```
File "lldb/third_party/Python/module/unittest2/unittest2/case.py", line 386, in run
self.tearDown()
File "lldb/packages/Python/lldbsuite/test/tools/lldb-server/gdbremote_testcase.py", line 124, in tearDown
self._pump_queues.verify_queues_empty()
File "lldb/packages/Python/lldbsuite/test/tools/lldb-server/socket_packet_pump.py", line 55, in verify_queues_empty
_dump_queue(self.packet_queue())
File "lldb/packages/Python/lldbsuite/test/tools/lldb-server/socket_packet_pump.py", line 28, in _dump_queue
print(codecs.encode(the_queue.get(True), "string_escape"))
LookupError: unknown encoding: string_escape
```
Just replace it with `repr` which should work in both Python versions.
Reviewers: labath, JDevlieghere
Reviewed By: labath, JDevlieghere
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D84017
Summary:
FormattersContainer.h has two containers: FormatMap and FormattersContainer
itself. FormatMap is essentially just a SetVector with a listener interface that
is aspiring to be thread-safe as most of its functions lock its member mutex.
FormattersContainer is for the most part just calling the matching functions of
internal FormatMap instance and essentially acts as a wrapper class with some
minor formatter search functionality on top. The only difference is that the
FormattersContainer's public `Get` function is actually searching formatters in
the list of formatters (and for example doing regex-matching) while FormatMap's
`Get` function is just looking up a a format by the type matcher string.
This patch deletes `FormatMap` by just renaming it to `FormattersContainer` and
pulling in the two `Get` functions from the original `FormattersContainer`
class.
The only other user of `FormatMap` was the `NamedSummariesMap` in the
`FormatManager` which I migrated by just making it also a `FormattersContainer`
and replaced the only call to the `Get` function (which now has new semantics)
with `GetExact` (which is FormattersContainer's function that has the semantics
of FormatMap's `Get`). As `NamedSummariesMap` only stores non-regex-based
formatters, both `Get` and `GetExact` would have worked, so this was mostly to
clarify that this is supposed to be NFC.
I also added the missing mutex lock in the `GetCount` function which was
previously missing in the `FormatMap` implementation. Technically not "NFC" but
I anyway had to change the function...
Reviewers: labath, mib
Reviewed By: labath
Subscribers: abidh, JDevlieghere
Differential Revision: https://reviews.llvm.org/D84296
This was originally reverted because the m_valid member in TypeMatcher was
unused in builds with disabled asserts. Now the member is gone and the default
constructor is deleted (thanks Eric for the idea!).
Summary:
FormattersContainer stores LLDB's formatters. It's implemented as a templated
map-like data structures that supports any kind of value type and only allows
ConstString and RegularExpression as the key types. The keys are used for
matching type names (e.g., the ConstString key `std::vector` matches the type
with the same name while RegularExpression keys match any type where the
RegularExpression instance matches).
The fact that a single FormattersContainer can only match either by string
comparison or regex matching (depending on the KeyType) causes us to always have
two FormatterContainer instances in all the formatting code. This also leads to
us having every type name matching logic in LLDB twice. For example,
TypeCategory has to implement every method twice (one string matching one, one
regex matching one).
This patch changes FormattersContainer to instead have a single `TypeMatcher`
key that wraps the logic for string-based and regex-based type matching and is
now the only possible KeyType for the FormattersContainer. This means that a
single FormattersContainer can now match types with both regex and string
comparison.
To summarize the changes in this patch:
* Remove all the `*_Impl` methods from `FormattersContainer`
* Instead call the FormatMap functions from `FormattersContainer` with a
`TypeMatcher` type that does the respective matching.
* Replace `ConstString` with `TypeMatcher` in the few places that directly
interact with `FormattersContainer`.
I'm working on some follow up patches that I split up because they deserve their
own review:
* Unify FormatMap and FormattersContainer (they are nearly identical now).
* Delete the duplicated half of all the type matching code that can now use one
interface.
* Propagate TypeMatcher through all the formatter code interfaces instead of
always offering two functions for everything.
There is one ugly design part that I couldn't get rid of yet and that is that we
have to support getting back the string used to construct a `TypeMatcher` later
on. The reason for this is that LLDB only supports referencing existing type
matchers by just typing their respective input string again (without even
supplying if it's a regex or not).
Reviewers: davide, mib
Reviewed By: mib
Subscribers: mgorny, JDevlieghere
Differential Revision: https://reviews.llvm.org/D84151
This reverts "Eliminate unneeded value parameters in Utility" for
ConstString. As Pavel pointed out on the mailing list, the class *is*
trivially copyable.
Summary:
Frame recognizers are stored alongside a flag that indicates whether they were
deleted by the user. If the flag is set, they are supposed to be ignored by the
rest of the frame recognizer code. 'frame recognizer delete' is supposed to set
that flag. 'frame recognizer clear' however actually deletes all frame
recognizers (so, it doesn't set the flag but directly deletes them from the
list).
The current implementation of this concept is pretty broken. `frame recognizer
delete` sets the flag, but it somehow thinks that the recognizer id is an index
in the recognizer list. That's not true as it's actually just a member of each
recognizer entry. So it actually just sets the `deleted` flag for a random other
recognizer. The tests for the recognizer still pass as `frame recognizer list`
is also broken and just completely ignored the `deleted` flag and lists all
recognizers. Also `frame recognizer delete` just ignores if it can't actually
delete a recognizer if the id is invalid.
I think we can simplify this whole thing by just actually deleting recognizers
instead of making sure all code is actually respecting the `deleted` flag. I
assume the intention of this was to make sure that all recognizers are getting
unique ids over the course of an LLDB session, but as `clear` is actually
deleting them and we keep recycling ids, that didn't really work to begin with.
This patch deletes the `deleted` flag and just actually deletes the stored
recognizer. Also adds the missing error message in case it find a recognizer
with a given id.
Reviewers: mib
Reviewed By: mib
Subscribers: abidh, JDevlieghere
Differential Revision: https://reviews.llvm.org/D84404
This patch refactors `emitDebugInfo()` to make the length field be
inferred from its content. Besides, the `Visitor` class is removed in
this patch. The original `Visitor` class helps us determine an
appropriate length and emit the .debug_info section. These two
processes can be merged into one process. Besides, the length field
should be inferred when it's missing rather than when it's zero.
Reviewed By: jhenderson, labath
Differential Revision: https://reviews.llvm.org/D84008
The patch was reverted 27d52cd86a because of failures in
TestWeakSymbols.py. These have now been addressed in D83552.
The original commit message was:
This function was documented to overwrite entries with D76111, which was
adding a couple of similar functions. However, this function (unlike the
functions added in that patch) was/is not actually overwriting variables
-- any pre-existing variables would get ignored.
This behavior does not seem to be intentional. In fact, before the refactor in
D41359, this function could introduce duplicate entries, which could
have very surprising effects both inside lldb and on other applications
(some applications would take the first value, some the second one; in
lldb, attempting to unset a variable could make the second variable
become active, etc.).
Overwriting seems to be the most reasonable behavior here, so change the
code to match documentation.
Differential Revision: https://reviews.llvm.org/D83306
This patch fixes a test failure in TestHistoryRecall caused by the move
of the `history` subcommand to the `session` command.
This change was introduced by commit 85fbb08fa2.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch moves the `history` subcommand from the `command` to `session`
command. I think it makes more sense to have it there because as the `command`
usage suggests, it should be used to manage custom LLDB commands.
However, `history` is essentially tied to a debugging session and holds
all the commands (not specifically custom ones).
This also makes it more discoverable by adding an alias for it (mimicking
the shell builtin).
Differential Revision: https://reviews.llvm.org/D84307
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This reapplies commit d4020ef7c4, reverted in ac0edc5588 because it
broke build of LLDB. This commit contains appropriate changes for LLDB.
The original commit message is below.
Documentation on CreateProcessW states that maximal size of command line
is 32767 characters including ternimation null character. In the
function llvm::sys::commandLineFitsWithinSystemLimits this limit was set
to 32768. As a result if command line was exactly 32768 characters long,
a response file was not created and CreateProcessW was called with
too long command line.
Differential Revision: https://reviews.llvm.org/D83772
add_compile_options is more sensitive to its location in the file than add_definitions--it only takes effect for sources that are added after it. This updated patch ensures that the add_compile_options is done before adding any source files that depend on it.
Using add_definitions caused the flag to be passed to rc.exe on Windows and thus broke Windows builds.
LLVM_TARGET_ARCH is not exported by LLVM so we can't use it from
standalone builds. Default to the architecture in LLVM_HOST_TRIPLE when
no LLDB_DEFAULT_TEST_ARCH was specified.
After lots of follow-up fixes, there are still problems, such as
-Wno-suggest-override getting passed to the Windows Resource Compiler
because it was added with add_definitions in the CMake file.
Rather than piling on another fix, let's revert so this can be re-landed
when there's a proper fix.
This reverts commit 21c0b4c1e8.
This reverts commit 81d68ad27b.
This reverts commit a361aa5249.
This reverts commit fa42b7cf29.
This reverts commit 955f87f947.
This reverts commit 8b16e45f66.
This reverts commit 308a127a38.
This reverts commit 274b6b0c7a.
This reverts commit 1c7037a2a5.
- Remove the spurious argument to `CommandObjectScript`.
- Use make_shared instead of bare `new`.
- Move code duplication behind a macro.
Differential revision: https://reviews.llvm.org/D84336
This patch has no effect for C and C++. In more dynamic languages,
such as Objective-C and Swift GetByteSize() needs to call into the
language runtime, so it's important to pass one in where possible. My
primary motivation for this is some work I'm doing on the Swift
branch, however, it looks like we are also seeing warnings in
Objective-C that this may resolve. Everything in the SymbolFile
hierarchy still passes in nullptrs, because we don't have an execution
context in SymbolFile, since SymbolFile transcends processes.
Differential Revision: https://reviews.llvm.org/D84267
Summary: Add printing of the output of stdout during compile errors, in
addition to stderr output.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D83425
After more investigation, I realised this part of the code is totally
unused. It was used for communicating the test results from the
"inferior" dotest process to the main "dosep" process running
everything. Now that everything is being orchestrated through lit, this
is not used for anything.
This patch introduce a new feature that allows the users to save their
debugging session's transcript (commands + outputs) to a file.
It differs from the reproducers since it doesn't require to capture a
session preemptively and replay the reproducer file in lldb.
The user can choose the save its session manually using the session save
command or automatically by setting the interpreter.save-session-on-quit
on their init file.
To do so, the patch adds a Stream object to the CommandInterpreter that
will hold the input command from the IOHandler and the CommandReturnObject
output and error. This way, that stream object accumulates passively all
the interactions throughout the session and will save them to disk on demand.
The user can specify a file path where the session's transcript will be
saved. However, it is optional, and when it is not provided, lldb will
create a temporary file name according to the session date and time.
rdar://63347792
Differential Revision: https://reviews.llvm.org/D82155
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Summary:
registerSharedLibrariesWithTarget was setting the library path
environment variable to the process build directory, but the function is
also accepting libraries in other directories (in which case they won't
be found automatically).
This patch makes the function set the path variable correctly for these
libraries too. This enables us to remove the code for setting the path
variable in TestWeakSymbols.py, which was working only accidentally --
it was relying on the fact that
launch_info.SetEnvironmentEntries(..., append=True)
would not overwrite the path variable it has set, but that is going to
change with D83306.
Reviewers: davide, jingham
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83552
This was originally reverted because the Linux bots were red after this landed,
but it seems that was actually caused by a different commit. I double checked
that this works on Linux, so let's reland this on Linux.
Summary:
FormattersContainer stores LLDB's formatters. It's implemented as a templated
map-like data structures that supports any kind of value type and only allows
ConstString and RegularExpression as the key types. The keys are used for
matching type names (e.g., the ConstString key `std::vector` matches the type
with the same name while RegularExpression keys match any type where the
RegularExpression instance matches).
The fact that a single FormattersContainer can only match either by string
comparison or regex matching (depending on the KeyType) causes us to always have
two FormatterContainer instances in all the formatting code. This also leads to
us having every type name matching logic in LLDB twice. For example,
TypeCategory has to implement every method twice (one string matching one, one
regex matching one).
This patch changes FormattersContainer to instead have a single `TypeMatcher`
key that wraps the logic for string-based and regex-based type matching and is
now the only possible KeyType for the FormattersContainer. This means that a
single FormattersContainer can now match types with both regex and string
comparison.
To summarize the changes in this patch:
* Remove all the `*_Impl` methods from `FormattersContainer`
* Instead call the FormatMap functions from `FormattersContainer` with a
`TypeMatcher` type that does the respective matching.
* Replace `ConstString` with `TypeMatcher` in the few places that directly
interact with `FormattersContainer`.
I'm working on some follow up patches that I split up because they deserve their
own review:
* Unify FormatMap and FormattersContainer (they are nearly identical now).
* Delete the duplicated half of all the type matching code that can now use one
interface.
* Propagate TypeMatcher through all the formatter code interfaces instead of
always offering two functions for everything.
There is one ugly design part that I couldn't get rid of yet and that is that we
have to support getting back the string used to construct a `TypeMatcher` later
on. The reason for this is that LLDB only supports referencing existing type
matchers by just typing their respective input string again (without even
supplying if it's a regex or not).
Reviewers: davide, mib
Reviewed By: mib
Subscribers: mgorny, JDevlieghere
Differential Revision: https://reviews.llvm.org/D84151
Every override returns true and its return value is never checked. I can't
see how clearing an OptionValue could fail, or what you would
do if it did. The return serves no purpose.
Differential Revision: https://reviews.llvm.org/D84253
By using default arguments the caller can specify a subset without the
need for overloads. This is particularly useful in combination with
emplace_back as these objects are generally stored in a vector.
Summary:
FormattersContainer stores LLDB's formatters. It's implemented as a templated
map-like data structures that supports any kind of value type and only allows
ConstString and RegularExpression as the key types. The keys are used for
matching type names (e.g., the ConstString key `std::vector` matches the type
with the same name while RegularExpression keys match any type where the
RegularExpression instance matches).
The fact that a single FormattersContainer can only match either by string
comparison or regex matching (depending on the KeyType) causes us to always have
two FormatterContainer instances in all the formatting code. This also leads to
us having every type name matching logic in LLDB twice. For example,
TypeCategory has to implement every method twice (one string matching one, one
regex matching one).
This patch changes FormattersContainer to instead have a single `TypeMatcher`
key that wraps the logic for string-based and regex-based type matching and is
now the only possible KeyType for the FormattersContainer. This means that a
single FormattersContainer can now match types with both regex and string
comparison.
To summarize the changes in this patch:
* Remove all the `*_Impl` methods from `FormattersContainer`
* Instead call the FormatMap functions from `FormattersContainer` with a
`TypeMatcher` type that does the respective matching.
* Replace `ConstString` with `TypeMatcher` in the few places that directly
interact with `FormattersContainer`.
I'm working on some follow up patches that I split up because they deserve their
own review:
* Unify FormatMap and FormattersContainer (they are nearly identical now).
* Delete the duplicated half of all the type matching code that can now use one
interface.
* Propagate TypeMatcher through all the formatter code interfaces instead of
always offering two functions for everything.
There is one ugly design part that I couldn't get rid of yet and that is that we
have to support getting back the string used to construct a `TypeMatcher` later
on. The reason for this is that LLDB only supports referencing existing type
matchers by just typing their respective input string again (without even
supplying if it's a regex or not).
Reviewers: davide, mib
Reviewed By: mib
Subscribers: mgorny, JDevlieghere
Differential Revision: https://reviews.llvm.org/D84151
RecordInterestingDirectory was added to collect dSYM bundles and their
content. For the current working directory we only want the directory to
be part of the VFS, not necessarily its contents. This patch renames the
current method to RecordInterestingDirectoryRecursively and adds a new
one that's not recursive.
Summary:
FormattersContainer currently has an unused `m_name` member. Usually LLDB allows
giving objects names, but for the FormattersContainer it seems excessive. There
are only 4 FormattersContainer variables in LLDB and they are not usually passed
around, so one can always just go up a few frames when debugging to find out
which FormattersContainer you're dealing with.
Reviewers: mib, davide
Reviewed By: mib
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D84154
This patch fixes build on lldb-x64-windows-ninja. The error is caused by
use of two leading underscores.
According to MSVC documentation:
In Microsoft C++, identifiers with two leading underscores are reserved
for compiler implementations.
https://docs.microsoft.com/en-us/cpp/cpp/keywords-cpp?view=vs-2019
LinuxPTraceDefines_arm64sve.h defines essential macros for manipulating
AArch64 SVE core dump registers. Add guard for aarch64/Linux hosts where
newer versions of ptrace.h or sigcontext.h might already define SVE macros.
Differential Revision: https://reviews.llvm.org/D83541
The colon in the file name is interpreted as a drive name and therefore
the path looks like foo:\\bar.c. Compare FileSpecs instead of their
string representation so we don't have to worry about that.
file:line:column form that we use to print out locations. Since we
print them this way it makes sense we also accept that form.
Differential Revision: https://reviews.llvm.org/D83975
Use a weak pointer to hold on to the the underlying thread plan in
SBThreadPlan. When the process continues, all the popped ThreadPlans get
discarded, and you can’t reuse them, so you have to create them anew.
Therefore the SBThreadPlan doesn’t need to keep the ThreadPlan alive.
This fixes the cleanup error in TestThreadPlanCommands.py and
TestStepScripted.py caused by the thread plans never being deleted.
Differential revision: https://reviews.llvm.org/D84210
Currently expressions dealing with bit-fields in Objective-C objects is pretty broken. When generating debug-info for Objective-C bit-fields DW_AT_data_bit_offset has a different meaning than it does to C and C++.
When we parse the DWARF we validate bit offsets for C and C++ correctly but not for ObjC. For ObjC in some cases we end up incorrectly flagging an error and we don't generate further bit-fields in the AST.
Later on when we do a name lookup we don't find the ObjCIvarDecl in the ObjCInterfaceDecl in some cases since we never added it and then we don't go to the runtime to obtain the offset.
This will fix how we handle bit-fields for the Objective-C case and add tests to verify this fix but also to documents areas that still don't work and will be addressed in follow-up PRs.
Note: we can never correctly calculate offsets statically because of how Objective-C deals with the fragile base class issue. Which means the runtime may need to shift fields over.
Differential Revision: https://reviews.llvm.org/D83433
This patch adds Clang's new (and GCC's old) -Wsuggest-override to the warning flags for the LLVM build. The warning is a stronger form of -Winconsistent-missing-override which warns _everywhere_ that override is missing, not just in places where it's inconsistent within a class.
Some directories in the monorepo need the warning disabled for compatibility's, or sanity's, sake; in particular, libcxx/libcxxabi, and any code implementing or interoperating with googletest, googlemock, or google benchmark (which do not themselves use override). This patch adds -Wno-suggest-override to the relevant CMakeLists.txt's to accomplish this.
Differential Revision: https://reviews.llvm.org/D84126
The function was fairly complicated and didn't support new bigger
integer sizes. Use llvm function for loading an APInt from memory to
write a unified implementation for all sizes.
The sed line in the rules was adding the .d file as a target to the
dependency rules -- to ensure the file gets rebuild when the sources
change. The same thing can be achieved more elegantly with some -M
flags.
Summary:
This patch adds support for AArch64 SVE register infos description and
core file register access.
AArch64 SVE is a an optional extension of Arm v8.3-a architecture. It
has introduced 32 new vector registers Z, 16 predicate P registers and FFR
predicate register. These registers have fixed names but can dynamically
be configured to different size based on underlying OS configuration.
This patch adds register info struct that describes SVE register infos and
also provides RegisterContextPOSIXCore_arm64 routines to access SVE registers.
This patch also introduces a mechanism to configure SVE register sizes and
offsets at startup before exchanging register information across gdb-remote.
TestLinuxCore.py has been updated to include testing of SVE core files.
Reviewers: labath, clayborg, jankratochvil, jasonmolenda, rengolin
Reviewed By: labath
Subscribers: tschuett, kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77047
Summary:
SVE elf note data requires SVE PT macros for reading writing data. Same macros are used by Linux ptrace SVE register access.
This patch makes necessary changes to lldb/source/Plugins/Process/Linux/LinuxPTraceDefines_arm64sve.h in order to make them sysroot independent.
Reviewers: labath, rengolin
Reviewed By: labath
Subscribers: tschuett, lldb-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D83541
Summary:
This patch removes dependence of RegisterContextPOSIX_arm64 on register number enums defined in lldb-arm64-register-enums.h.
RegisterContextPOSIX_arm64 makes use of helper functions to access register numbers defined in RegisterInfos_arm64.h via RegisterInfosPOSIX_arm64.
Reviewers: labath
Reviewed By: labath
Subscribers: emaste, kristof.beyls, arphaman, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D83753
Summary:
When modules reference each other (which happens for example with the different
modules LLDB loads when debugging -gmodules-compiled binaries), just iterating
over the module list once isn't good enough to find all orphans. Any removed
modules in the module list will also clear up the shared pointers they hold to
other modules, so after any module was removed from the list, LLDB should
iterate again and check if any additional modules can no be safely deleted.
This is currently causing that many gmodules tests are not cleaning up all
allocated modules which causes cleanup asserts to fail (right now these asserts
just mark the test as unsupported, but after D83865 the tests will start
failing).
Reviewers: aprantl, clayborg, JDevlieghere
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D84015
The `intrinsics_gen` target exists in the CMake exports since r309389
(see LLVMConfig.cmake.in), hence projects can depend on `intrinsics_gen`
even it they are built separately from LLVM.
Reviewed By: MaskRay, JDevlieghere
Differential Revision: https://reviews.llvm.org/D83454
Reduce sleep and time outs in GDB remote testcases to one default value
for each. Stop passing these values around and always use the default
instead.
Differential revision: https://reviews.llvm.org/D83904
Summary:
This code (recently responsible for a unaligned access sanitizer
failure) claims that the string table offset zero should result in an
empty string.
I cannot find any mention of this detail in the Microsoft COFF
documentation, and the llvm COFF parser also does not handle offset zero
specially. This code was introduced in 0076e7159, which also does not go
into specifics, citing "various bugfixes".
Given that this is obviously a hack, and does not cause tests to fail, I
think we should just delete it.
Reviewers: amccarth, markmentovai
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83881
Summary:
With D81784, lld has started debug info resolving relocations to
garbage-collected symbols as -1 (instead of relocation addend). For an
unaware consumer this generated sequences which seemingly wrap the
address space -- their first entry was 0xfffff, but all other entries
were low numbers.
Lldb stores line sequences concatenated into one large vector, sorted by
the first entry, and searched with std::lower_bound. This resulted in
the low-value entries being placed at the end of the vector, which
utterly confused the lower_bound algorithm, and caused it to not find a
match. (Previously, these sequences would be at the start of the vector,
and normally would contain addresses that are far smaller than any real
address we want to look up, so std::lower_bound was fine.)
This patch makes lldb ignore these kinds of sequences completely. It
does that by changing the construction algorithm from iterating over the
rows (as parsed by llvm), to iterating over the sequences. This is
important because the llvm parsed performs validity checks when
constructing the sequence array, whereas the row array contains raw
data.
Reviewers: JDevlieghere, MaskRay
Differential Revision: https://reviews.llvm.org/D83957
Summary:
Currently the frame recognizers are stored in a global list (the list in the
StackFrameRecognizersManagerImpl singleton to be precise). All commands and
plugins that modify the list are just modifying that global list of recognizers
which is shared by all Target and Debugger instances.
This is clearly against the idea of LLDB being usable as a library and it also
leads to some very obscure errors as now multiple tests are sharing the used
frame recognizers. For example D83400 is currently failing as it reorders some
test_ functions which permanently changes the frame recognizers of all
debuggers/targets. As all frame recognizers are also initialized in a 'once'
guard, it's also impossible to every restore back the original frame recognizers
once they are deleted in a process.
This patch just moves the frame recognizers into the current target. This seems
the way everyone assumes the system works as for example the assert frame
recognizers is using the current target to find the function/so-name to look for
(which only works if the recognizers are stored in the target).
Reviewers: jingham, mib
Reviewed By: jingham, mib
Subscribers: MrHate, JDevlieghere
Differential Revision: https://reviews.llvm.org/D83757
Summary:
When we try to find the executable module for our target we don't check
if we already have an executable module set. This causes that when debugging
a program that dlopens another executable, LLDB will take that other executable
as the new executable of the target (which causes that future launches of the
target will launch the dlopen'd executable instead of the original executable).
This just adds a check that we only set the executable when we haven't already
found one.
Fixes rdar://63443099
Reviewers: jasonmolenda, jingham, teemperor
Reviewed By: jasonmolenda, teemperor
Subscribers: jingham, JDevlieghere
Differential Revision: https://reviews.llvm.org/D80724
This test is hitting https://bugs.python.org/issue22393 which results in
the lit multiprocessing pool deadlocking and the reproducer job timing
out on GreenDragon.
Summary:
On macOS 11, the libraries that have been integrated in the system
shared cache are not present on the filesystem anymore. LLDB was
using those files to get access to the symbols of those libraries.
LLDB can get the images from the target process memory though.
This has 2 consequences:
- LLDB cannot load the images before the process starts, reporting
an error if someone tries to break on a system symbol.
- Loading the symbols by downloading the data from the inferior
is super slow. It takes tens of seconds at the start of the
debug session to populate the Module list.
To fix this, we can use the library images LLDB has in its own
mapping of the shared cache. Shared cache images are somewhat
special as their LINKEDIT segment is moved to the end of the cache
and thus the images are not contiguous in memory. All of this can
hidden in ObjectFileMachO.
This patch fixes a number of test failures on macOS 11 due to the
first problem described above and adds some specific unittesting
for the new SharedCache Host utilities.
Reviewers: jasonmolenda, labath
Subscribers: llvm-commits, lldb-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D83023
Template specializations are not handled in many of the
TypeSystemClang methods. For example, GetNumChildren does not handle
the TemplateSpecialization type class, so template specializations
always look like empty objects.
This patch just desugars template specializations in the existing
RemoveWrappingTypes desugaring helper.
Differential Revision: https://reviews.llvm.org/D83858
Summary:
test_terminate_commands is flaky on LLDB Arm buildbot as well. It was already
being skipped for aarch64. I am going to mark it skipped for Arm too.
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81978
Remove custom tearDownHooks from GDB Remote tests as we now cleanup
subprocesses unconditionally. This also changes the termination order to
be the reverse of the creation order. I don't think anything is relying
on that right now, but it better fits the setup/teardown paradigm.
These were found by Clang's new -Wsuggest-override.
This patch doesn't touch any code in unittests/, since much of it intentionally doesn't use override to avoid massive warning spam from -Winconsistent-missing-override due to the use of MOCK_*** macros.
Differential Revision: https://reviews.llvm.org/D83847
Several scripts (two copies of use_lldb_suite.py, and an __init__.py) look for use_lldb_suite_root.py by checking parent directories. If for some reason it doesn't exist, it keeps checking parent directories until it finds it.
However, this only breaks when the parent directory is None, but at least on Linux, dirname('/') == '/', so this will never be None.
This changes the lookup to stop if the dirname(lldb_root) is unchanged. This was previously fixed in 67f6d842fa, but only in one copy of this script.
Additionally, this makes the failure mode more visible -- if the root is not found, it complains loudly instead of silently failing, and having later modules that need lldb_root fail.
Differential Revision: https://reviews.llvm.org/D83840
Remove the forkSubprocess method and its bookkeeping.
TestCreateAfterAttach is the only test using the fork method and I'm not
convinced it adds enough to warrant the maintenance. Pavel suggested the
same thing in D83815.
This reverts commit 29aab9b5c7.
It seems on Windows the file name is just always "lldbsuite.test.lldbtest" for
all tests and that breaks pretty much everything. Reverting until we have
a better solution.
It's possible to achieve the same effect by providing multi-step recipe
instead of a single-step recipe where the step happens to contain
multiple commands.
It served a puprose while we were using the test name to provide a name
for the created file. Now that the files are created in memory, we don't
need that.
Summary:
Currently expect_expr will not run the expression if no target is selected. This
patch changes this behavior so that expect_expr will instead fall back to the
dummy target similar to what the `expression` command is doing. This way we
don't have to compile an empty executable to be able to use `expect_expr` (which
is a waste of resources for tests that just test generic type system features).
As a test I modernized the TestTypeOfDeclTypeExpr into a Python test +
expect_expr (as it relied on the dummy target fallback of the expression
command).
Reviewers: labath, JDevlieghere
Reviewed By: labath
Subscribers: abidh
Differential Revision: https://reviews.llvm.org/D83388
Summary:
From what I know we already have the restriction that every test in the test
suite needs to have a unique file name as that's used for generating the unique
build directory for a test. It seems there is also a restriction that every test
case class in the test suite needs to have a unique name as that's used to
generate the unique log file name for the test run.
This changes the log file format to use the basename of the test file instead so
that we only have to keep worrying about the 'unique file name' restriction from
now on.
This came up because I started naming the test classes "TestCase" (as repeating
the file name in the test class seems like redudant information that just makes
renaming tests a pain).
Reviewers: labath, JDevlieghere
Reviewed By: labath
Subscribers: mgorny, abidh
Differential Revision: https://reviews.llvm.org/D83767
Summary:
Certain `NSDate` constructors return a special `NSConstantDate` class which
currently ends up being unformatted as it's not in the list of supported classes
for the NSDate formatter. This patch adds that class to the supported class list
so LLDB produces a summary for it.
One of these special constructors is `[NSDate distantPast]` which returns the
date for `0001-01-01 00:00:00 UTC`. LLDB has a special case for formatting this
date but for some reason we did hardcode the wrong summary string in that
special case. Maybe the summary string was correct back when the code was
written but it isn't correct anymore (`distantPast` isn't actually defined to be
a special date but just some 'a guaranteed temporal boundary.' so maybe someone
changed the value in the last 10 years).
If someone else is wondering why we even have this special case for
`distantPast` but not for the future. The reason seems to be that our date
formatting for really old dates is off by 24 hours. So for example, adding one
second to `distantPast` will cause LLDB to print `0000-12-30 00:00:01 UTC`
(which is 24 hours behind the expected result). So to make our code appear to be
correct it seems we just hardcoded the most common NSDate result from that time
span. I'll replace that logic with a generic solution in a probably more
invasive follow up patch.
I also took the freedom to replace the magic value `-63114076800` with some
constant + documentation. I heard there are some people that don't know from the
top of their head that there are 63114076800 seconds between 1. Jan 0001 and 1.
January 2001 in whatever calendar system NSDate is using.
Reviewers: mib, davide
Reviewed By: mib
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D83217
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
the form that takes func as an argument isn't compatible with the
optional bugnumber argument. This means that only correct for to use it is now
@skipIfRosetta(bugnumber='url')
Always clean up subprocesses on tear down instead of relying on the
caller to do so. This is not only less error prone but also means the
tests can be more concise.
Differential revision: https://reviews.llvm.org/D83787
- Make the open more Pythonic.
- Remove the unused `cleanup` Make target.
- Remove commented-out/obvious/low-value comments.
- Cleanup the forked process PID list.
Skip TestProcessConnect.py on Windows and Android (the same platforms as
TestPlatformProcessConnect.py) and mark it as a NO_DEBUG_INFO test so we
don't run all the variants.
Summary:
This patch extends the ModuleSpec class to include a
DataBufferSP which contains the module data. If this
data is provided, LLDB won't try to hit the filesystem
to create the Module, but use only the data stored in
the ModuleSpec.
Reviewers: labath, espindola
Subscribers: emaste, MaskRay, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83512
In synchronous mode, the process connect command and its aliases should
wait for the stop event before claiming the command is complete.
Currently, the stop event is always handled asynchronously by the
debugger.
The implementation takes the same approach as Process::ResumeSynchronous
which hijacks the event and handles it on the current thread. Similarly,
after this patch, the stop event is part of the command return object,
which is the property used by the test case.
Differential revision: https://reviews.llvm.org/D83728
Summary: Just unifying all that copy-pasted code.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D83662
The glob expression for a test called "test" could match a log file for
a the test "test_foo". Instead of globbing, maintain an explicit list of
log files relevant to the current test.
It was failing because some module events had empty UUID, and that was not handled correctly.
The diff that added that logic is https://reviews.llvm.org/D82477
Original commit c60216db15.
The test can only run on Darwin because of how it was setup, so I'm
enforcing that.
Summary:
Test Plan:
Reviewers:
Subscribers:
Tasks:
Tags:
This allows skipping a test when running the testsuite on macOS under
the Rosetta translation layer.
Differential Revision: https://reviews.llvm.org/D83600
The function's reliance on host types meant that it was needlessly
complicated, and did not handle the newer (wider) types. Rewrite it in
terms of APInt/APFloat functions to save code and improve functionality.
Summary:
My understanding is that this was added to make dotest interact well
with the GreenDragon bots, back when dotest was the main test driver.
Now that everything goes through lit (which has its own xunit
formatter), it seems largely irrelevant.
There are more cleanups that can be done after removing this be done
here, but this should be enough to test the waters.
Reviewers: JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83545
There is a local 'class_language' veriable in DWARFASTParserClang which is named
as if it is related to the 'class_language' member of ParsedDWARFTypeAttributes.
However, it actually only has two possible enum values: 'ObjC' (which means the
current record is a Objective-C class) or 'Unknown' (which covers all other
cases).
This is confusing for the reader and also lead to some strange code where we
have several comparisons against the value "ObjC_plus_plus" (which is always
false).
This replaces the variable with either a const bool variable (if there are
multiple checks for that condition in a function) or a direct call to the
TypeSystemClang utility method for checking if it's a Objective-C
Object/Interface type.
For some reason this works on the original author's machine, but not on my. So I'm using a safer approach of using an unstripped dynamic library to place breakpoints on. The author was placing a breakpoint on the main symbol of a stripped library and for some reason it worked on their machine, but it shouldn't have...
Offender diff: D82477
Summary: User can expand and check compile unit list for the modules that have debug info.
Reviewers: wallace, clayborg
Reviewed By: clayborg
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83072
Summary:
Whenever a module is created, removed or changed, lldb-vscode is now sending an event that can be interpreted by the IDE so that modules can be rendered in the IDE, like the tree view in this screenshot
{F12229758}
Reviewers: wallace, clayborg, kusmour, aadsm
Reviewed By: clayborg
Subscribers: cfe-commits, labath, lldb-commits
Tags: #lldb, #clang
Differential Revision: https://reviews.llvm.org/D82477
This patch does several things that are all closely related:
- It introduces a new YamlRecorder as a counterpart to the existing
DataRecorder. As the name suggests the former serializes data as yaml
while the latter uses raw texts or bytes.
- It introduces a new MultiProvider base class which can be backed by
either a DataRecorder or a YamlRecorder.
- It reimplements the CommandProvider in terms of the new
MultiProvider.
Finally, it adds unit testing coverage for the MultiProvider, a naive
YamlProvider built on top of the new YamlRecorder and the existing
MutliLoader.
Differential revision: https://reviews.llvm.org/D83441
Summary:
This fixes an override issue by marking a function as const so that the
signature maps to the signature of the function in the base class.
This is the original error:
In file included from /root/llvm/lldb/source/Plugins/Process/Linux/NativeRegisterContextLinux_s390x.cpp:11:
/root/llvm/lldb/source/Plugins/Process/Linux/NativeRegisterContextLinux_s390x.h:79:10: error: 'size_t lldb_private::process_linux::NativeRegisterContextLinux_s390x::GetGPRSize()' marked 'override', but does not override
79 | size_t GetGPRSize() override { return sizeof(m_regs); }
| ^~~~~~~~~~
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83580
The problem is that synthetic value objects can sometimes represent objects in target memory, and other times they might be made up wholly in lldb memory, with pointers from one synthetic object to another, and so the ValueObjectVariable computation was not appropriate.
This patch delegates the computation to the root of the ValueObject in question. That solves the problem for ValueObjectVariable while not messing up the computation for ValueObjectConstResult or ValueObjectSynthetic.
Differential Revision: https://reviews.llvm.org/D83450
Change the code the use the version which accepts a memory buffer,
instead of the one taking a file name.
This ensures we are not loading the file into memory twice
(ObjectFilePECOFF also loads a copy), reducing our memory footprint, as
well as enabling additional goodies in the future, like being able to
open files which don't exist on disk (D83512).
This patch updates ARM64_ehframe_Registers.h and ARM64_DWARF_Registers.h
with latest register numbers in line with AArch64 SVE support.
For refernce take a look at "DWARF for the ARM® 64-bit Architecture (AArch64)
with SVE support" manual from Arm.
Version used: abi_sve_aadwarf_100985_0000_00_en.pdf
NativeProcessELF::GetELFImageInfoAddress<...>() is declared in NativeProcessELF.h, but only defined in NativeProcessELF.cpp. Via some optimized builds (e.g. thinlto), this instantiation may be removed when it is used in a different TU (NativeProcessELFTest.cpp).
Summary:
-debug-info-kind=constructor reduces the amount of class debug info that
is emitted; this patch switches to using this as the default.
Constructor homing emits the complete type info for a class only when the
constructor is emitted, so it is expected that there will be some classes that
are not defined in the debug info anymore because they are never constructed,
and we shouldn't need debug info for these classes.
I compared the PDB files for clang, and there are 273 class types that are defined with `=limited`
but not with `=constructor` (out of ~60,000 total class types).
We've looked at a number of the types that are no longer defined with =constructor. The vast
majority of cases are something like class A is used as a parameter in a member function of
some other class B, which is emitted. But the function that uses class A is never called, and class A
is never constructed, and therefore isn't emitted in the debug info.
Bug: https://bugs.llvm.org/show_bug.cgi?id=46537
Subscribers: aprantl, cfe-commits, lldb-commits
Tags: #clang, #lldb
Differential Revision: https://reviews.llvm.org/D79147
There are bugs where you don't want the signal handler to trigger, most
notably when that will cause another crash. Examples of this are lldb
running out of memory or a bug in the reproducer generation code. This
adds an escape hatch trough a (developer oriented) flag to not install
the signal handler.
rdar://problem/65149595
Differential revision: https://reviews.llvm.org/D83496
This is a preparatory rename of the developer facing reproducer flags.
reproducer-skip-version-check -> reproducer-no-version-check
reproducer-auto-generate -> reproducer-generate-on-quit
Fangrui Song