Add new method getFirstInputSection and use instead of getInputSections
where appropriate to avoid creation of an unneeded vector of input
sections.
Differential Revision: https://reviews.llvm.org/D73047
Fixes PR38748
mergeSections() calls getOutputSectionName() to get output section
names. Two MergeInputSections may be merged even if they are made
different by SECTIONS commands.
This patch moves mergeSections() after processSectionCommands() and
addOrphanSections() to fix the issue. The new pass is renamed to
OutputSection::finalizeInputSections().
processSectionCommands() and addorphanSections() are changed to add
sections to InputSectionDescription::sectionBases.
finalizeInputSections() merges MergeInputSections and migrates
`sectionBases` to `sections`.
For the -r case, we drop an optimization that tries keeping sh_entsize
non-zero. This is for the simplicity of addOrphanSections(). The
updated merge-entsize2.s reflects the change.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67504
llvm-svn: 372734
This patch is mechanically generated by clang-llvm-rename tool that I wrote
using Clang Refactoring Engine just for creating this patch. You can see the
source code of the tool at https://reviews.llvm.org/D64123. There's no manual
post-processing; you can generate the same patch by re-running the tool against
lld's code base.
Here is the main discussion thread to change the LLVM coding style:
https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html
In the discussion thread, I proposed we use lld as a testbed for variable
naming scheme change, and this patch does that.
I chose to rename variables so that they are in camelCase, just because that
is a minimal change to make variables to start with a lowercase letter.
Note to downstream patch maintainers: if you are maintaining a downstream lld
repo, just rebasing ahead of this commit would cause massive merge conflicts
because this patch essentially changes every line in the lld subdirectory. But
there's a remedy.
clang-llvm-rename tool is a batch tool, so you can rename variables in your
downstream repo with the tool. Given that, here is how to rebase your repo to
a commit after the mass renaming:
1. rebase to the commit just before the mass variable renaming,
2. apply the tool to your downstream repo to mass-rename variables locally, and
3. rebase again to the head.
Most changes made by the tool should be identical for a downstream repo and
for the head, so at the step 3, almost all changes should be merged and
disappear. I'd expect that there would be some lines that you need to merge by
hand, but that shouldn't be too many.
Differential Revision: https://reviews.llvm.org/D64121
llvm-svn: 365595
We currently (ab)use the Live bit on output sections to track whether
the section has ever had an input section added to it, and then later
use it during orphan placement. This will conflict with one of my upcoming
partition-related changes that will assign all output sections to a partition
(thus marking them as live) so that they can be added to the correct segment
by the code that creates program headers.
Instead of using the Live bit for this purpose, create a new flag and
start using it to track the property explicitly.
Differential Revision: https://reviews.llvm.org/D62348
llvm-svn: 362444
This is https://bugs.llvm.org//show_bug.cgi?id=38750.
If script references empty sections in LOADADDR/ADDR commands
.empty : { *(.empty ) }
.text : AT(LOADADDR (.empty) + SIZEOF (.empty)) { *(.text) }
then an empty section will be removed and LOADADDR/ADDR will evaluate to null.
It is not that user may expect from using of the generic script, what is a common case.
Differential revision: https://reviews.llvm.org/D54621
llvm-svn: 359279
This lets us remove the special case from Writer::writeSections(), and also
fixes a bug where .eh_frame_hdr isn't necessarily written in the correct
order if a linker script moves .eh_frame and .eh_frame_hdr into the same
output section.
Differential Revision: https://reviews.llvm.org/D58795
llvm-svn: 355153
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
The uint32_t type does not clearly convey that these fields are interpreted
in the target endianness. Converting them to byte arrays should make this
more obvious and less error-prone.
Patch by James Clarke
Differential Revision: http://reviews.llvm.org/D54207
llvm-svn: 346893
Out::DebugInfo was used only by GdbIndex class to determine if
we need to create a .gdb_index section, but we can do the same
check without it.
Added a test that this patch doesn't change the existing behavior.
llvm-svn: 345058
This is PR36768.
Linker script OVERLAYs are described in 4.6.9. Overlay Description of the spec:
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/4/html/Using_ld_the_GNU_Linker/sections.html
They are used to allow output sections which have different LMAs but the same VAs
and used for embedded programming.
Currently, LLD restricts overlapping of sections and that seems to be the most desired
behaviour for defaults. My thoughts about possible approaches for PR36768 are on the bug page,
this patch implements OVERLAY keyword and allows VAs overlapping for sections that within the overlay.
Differential revision: https://reviews.llvm.org/D44780
llvm-svn: 335714
The current support for V1 ABI in LLD is incomplete.
This patch removes V1 ABI support and changes the default behavior to V2 ABI,
issuing an error when using the V1 ABI. It also updates the testcases to V2
and removes any V1 specific tests.
Differential Revision: https://reviews.llvm.org/D46316
llvm-svn: 331529
This is PR36515.
Currenly if we have a script like .debug_info 0 : { *(.debug_info) },
we would not remove this section and keep it in the output.
That does not work, because it is common case for
debug sections to have a zero address expression.
Patch changes behavior so that we remove only sections
that do not use symbols in its expressions.
Differential revision: https://reviews.llvm.org/D43863
llvm-svn: 326430
This fixes pr36475.
I think this code can be simplified a bit, but I would like to check
in the more direct fix if we are in agreement on the direction and
then refactor.
This is not something that bfd does. The issue is not noticed in bfd
because it keeps fewer sections from the linkerscript in the output.
The reasons why it seems reasonable to do this:
- As George noticed, we would still keep the flags if the output
section had both an empty synthetic section and a regular section
- We need an heuristic to find the flags of output sections. Using the
flags of a synthetic section that would have been there seems a
reasonable heuristic.
llvm-svn: 326137
We sometimes need to iterate over input sections for a given
output section. It is not very convinent because we have to iterate
over section descriptions.
Patch introduces getInputSections helper, it simplifies things.
Differential revision: https://reviews.llvm.org/D43574
llvm-svn: 325763
The profailing style in lld seem to be to not include such empty lines.
Clang-tidy/clang-format seem to handle this just fine.
Differential Revision: https://reviews.llvm.org/D43528
llvm-svn: 325629
If two sections are in the same PT_LOAD, their relatives offsets,
virtual address and physical addresses are all the same.
I initially wanted to have a single global LMAOffset, on the
assumption that every ELF file was in practiced loaded contiguously in
both physical and virtual memory.
Unfortunately that is not the case. The linux kernel has:
LOAD 0x200000 0xffffffff81000000 0x0000000001000000 0xced000 0xced000 R E 0x200000
LOAD 0x1000000 0xffffffff81e00000 0x0000000001e00000 0x15f000 0x15f000 RW 0x200000
LOAD 0x1200000 0x0000000000000000 0x0000000001f5f000 0x01b198 0x01b198 RW 0x200000
LOAD 0x137b000 0xffffffff81f7b000 0x0000000001f7b000 0x116000 0x1ec000 RWE 0x200000
The delta for all but the third PT_LOAD is the same:
0xffffffff80000000. I think the 3rd one is a hack for implementing per
cpu data, but we can't break that.
llvm-svn: 323456
AT> lma_region expression allows to specify the memory region
for section load address.
Should fix PR35684.
Differential revision: https://reviews.llvm.org/D41397
llvm-svn: 322359
The size of an OutputSection is calculated early, to aid handling of compressed
debug sections. However, subsequent to this point, unused synthetic sections are
removed. In the event that an OutputSection, from which such an InputSection is
removed, is still required (e.g. because it has a symbol assignment), and no longer
has any InputSections, dot assignments, or BYTE()-family directives, the size
member is never updated when processing the commands. If the removed InputSection
had a non-zero size (such as a .got.plt section), the section ends up with the
wrong size in the output.
The fix is to reset the OutputSection size prior to processing the linker script
commands relating to that OutputSection. This ensures that the size is correct even
in the above situation.
Additionally, to reduce the risk of developers misusing OutputSection Size and
InputSection OutSecOff, they are set to simply the number of InputSections in an
OutputSection, and the corresponding index respectively. We cannot completely
stop using them, due to SHF_LINK_ORDER sections requiring them.
Compressed debug sections also require the full size. This is now calculated in
maybeCompress for these kinds of sections.
Reviewers: ruiu, rafael
Differential Revision: https://reviews.llvm.org/D38361
llvm-svn: 320472
Now that DefinedRegular is the only remaining derived class of
Defined, we can merge the two classes.
Differential Revision: https://reviews.llvm.org/D39667
llvm-svn: 317448
Stop using SectionKey for creating output sections.
Initially SectionKey was designed because we merged section with
use of Flags and Alignment fields. Currently LLD merges them by name only,
except the case when -relocatable output is produced. In that case
we still merge sections only with the same flags and alignment.
There is probably no issue at all to stop using Flags and Alignment for -r and
just disable the merging in that case.
After doing that change we can get rid of using SectionKey. That is not only
simplifies the code, but also gives some perfomance boost.
I tried to link chrome and mozilla, results are next:
* chrome link time goes from 1,666750355s to 1,551585364s, that is about 7%.
* mozilla time changes from 3,210261947 to 3,153782940, or about 2%.
Differential revision: https://reviews.llvm.org/D39594
llvm-svn: 317406
Now that we have only SymbolBody as the symbol class. So, "SymbolBody"
is a bit strange name now. This is a mechanical change generated by
perl -i -pe s/SymbolBody/Symbol/g $(git grep -l SymbolBody lld/ELF lld/COFF)
nd clang-format-diff.
Differential Revision: https://reviews.llvm.org/D39459
llvm-svn: 317370
This moves reporting of garbage collected sections right after
we do GC. That simplifies things.
Differential revision: https://reviews.llvm.org/D39058
llvm-svn: 316759
"Commands" was ambiguous because in the linker script, everything is
a command. We used to handle only SECTIONS commands, and at the time,
it might make sense to call them the commands, but it is no longer
the case. We handle not only SECTIONS but also MEMORY, PHDRS, VERSION,
etc., and they are all commands.
llvm-svn: 315409
Previously, when we added an input section to an output section, we
called `OutputSectionFactory::addInputSec`. This isn't a good design
because, a factory class is intended to create a new object and
return it, but in this use case, it will never create a new object.
This patch fixes the design flaw.
llvm-svn: 315138
Factory::addInputSec added an output section to Script->Opt.Commands,
but that is too subtle. This patch makes it explicit so that it is easy
to see when a new element is added to Script->Opt.Commands.
llvm-svn: 315129
addSection function was hard to read because it behaves differently
depending on its arguments but what exactly it does is not clear.
Now it should be better. Still, it is not clear (not what but) why
it does what it does, but I'll take a look at it later.
llvm-svn: 315124
New lld's files are spread under lib subdirectory, and it isn't easy
to find which files are actually maintained. This patch moves maintained
files to Common subdirectory.
Differential Revision: https://reviews.llvm.org/D37645
llvm-svn: 314719
Patch removes one of OutputSectionFactory::addInputSec methods.
That allows to simplify reporting of discarded sections and
should help to D37561.
Differential revision: https://reviews.llvm.org/D37735
llvm-svn: 313361
It is a bit more convinent and helps to simplify logic
of program headers allocation a little.
Differential revision: https://reviews.llvm.org/D34956
llvm-svn: 312711
This is PR33889,
Patch adds support of combination of linkerscript and
-symbol-ordering-file option.
If no sorting commands are present in script inside section declaration
and no --sort-section option specified, code uses sorting from ordering
file if any exist.
Differential revision: https://reviews.llvm.org/D35843
llvm-svn: 310045
This is a bit of a hack, but it is *so* convenient.
Now that we create synthetic linker scripts when none is provided, we
always have to handle paired OutputSection and OutputsectionCommand and
keep a mapping from one to the other.
This patch simplifies things by merging them and creating what used to
be OutputSectionCommands really early.
llvm-svn: 309311
Andrew Ng