GNU linkers by convention supports both `--foo bar` and `--foo=bar` styles
for all long options that take arguments.
Differential Revision: https://reviews.llvm.org/D43972
llvm-svn: 326506
Summary:
If an executable needs text relocations, it should be marked as such so
that the loader can prepare for text relocations. We currently create a
dummy segment with DT_TEXTREL for that purpose.
Generic ABI as of 2000 [1] mentioned that "Its [DT_TEXTREL's] use
has been superseded by the DF_TEXTREL flag". However, it's actually not
superseded even after 18 years. OpenBSD and musl recognize only DT_TEXTREL.
So we still need to set both.
[1] http://www.sco.com/developers/gabi/2000-07-17/ch5.dynamic.html
Reviewers: rafael
Subscribers: emaste, llvm-commits, arichardson
Differential Revision: https://reviews.llvm.org/D43920
llvm-svn: 326503
With the current code if the script has a PHDRS we always obey and try
to allocate a header. This can cause Min - HeaderSize to underflow.
It looks like bfd actually prints an error for this case. With this
patch we do the same.
Found while looking at pr36515.
llvm-svn: 326441
LLD crashes with broken scripts shown in testcase,
because fails to read memory regon name and accesses
MemoryRegions's element which is nullptr.
Patch fixes it.
Differential revision: https://reviews.llvm.org/D43866
llvm-svn: 326431
This is PR36515.
Currenly if we have a script like .debug_info 0 : { *(.debug_info) },
we would not remove this section and keep it in the output.
That does not work, because it is common case for
debug sections to have a zero address expression.
Patch changes behavior so that we remove only sections
that do not use symbols in its expressions.
Differential revision: https://reviews.llvm.org/D43863
llvm-svn: 326430
Previously, we didn't try to make effort to put .note sections next
to each other in the output file, so two .note sections were likely
to be stored to two separate NOTE segments. That's undesirable because
we should create as few segments as possible in general.
Differential Revision: https://reviews.llvm.org/D43858
llvm-svn: 326410
It now includes both linkerscript and non linkerscript variants.
Extracted from a patch by Rui while I was trying to figure out what
exactly was changing.
llvm-svn: 326409
Summary:
This change removes large "echo" commands from the test by writing
tests themselves as linker scripts.
Reviewers: rafael
Subscribers: emaste, javed.absar, llvm-commits, arichardson
Differential Revision: https://reviews.llvm.org/D43900
llvm-svn: 326403
Some linker script test cases contain only a few lines of assembly
and a long linker script. Such tests are easier to maintain if we
write the main test file as a linkier script instead of assembly.
Differential Revision: https://reviews.llvm.org/D43887
llvm-svn: 326363
Update LLD test expectations for new symbol ordering introduced by
Differential D43685.
Differential Revision: https://reviews.llvm.org/D43875
llvm-svn: 326335
We should process symbols inside output section declarations the same way as top-level ones.
Differential Revision: https://reviews.llvm.org/D43008
llvm-svn: 326305
This means we don't need to write the linking metadata section
at all for executable (non-relocatable) output.
Differential Revision: https://reviews.llvm.org/D42869
llvm-svn: 326268
Summary:
Some of the tests invoke llvm-readelf. This currently appears to work
probably because the LLVM binary directory is included in $PATH. However,
this is quite fragile so let's just make lit expand the full path.
Reviewers: ruiu, espindola
Reviewed By: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43827
llvm-svn: 326257
Imagine that we have sections A, B, C, where A == C and
symbol ordering file containing symbols: symC, symB, symA
Previously because of ICF it was possible that final order would be
B, A or B, C. That violates order specified in ordering file.
Patch changes that.
Differential revision: https://reviews.llvm.org/D43234
llvm-svn: 326179
It should be possible to resolve undefined symbols in dynamic libraries
using symbols defined in a linker script.
Differential Revision: https://reviews.llvm.org/D43011
llvm-svn: 326176
This fixes pr36475.
I think this code can be simplified a bit, but I would like to check
in the more direct fix if we are in agreement on the direction and
then refactor.
This is not something that bfd does. The issue is not noticed in bfd
because it keeps fewer sections from the linkerscript in the output.
The reasons why it seems reasonable to do this:
- As George noticed, we would still keep the flags if the output
section had both an empty synthetic section and a regular section
- We need an heuristic to find the flags of output sections. Using the
flags of a synthetic section that would have been there seems a
reasonable heuristic.
llvm-svn: 326137
MIPS ABIs require that if an executable file uses non-PIC model, the
EI_ABIVERSION entry in the ELF header should be incremented from 0 to 1.
That allows obsoleted / limited dynamic linkers refuse to link them.
llvm-svn: 325890
This continues direction started in D43069.
We can keep sections that are explicitly assigned to segment in script.
It helps to simplify code.
Differential revision: https://reviews.llvm.org/D43571
llvm-svn: 325887
Latest patch version now.
Original commit message:
[ELF] - Do not crash with --emit-relocs and --icf=all together.
Previously we would crash because did not mark .rel[a] sections
as dead and they tried to access parent which was not live
after ICF and therefore was null.
Differential revision: https://reviews.llvm.org/D43241
llvm-svn: 325879
Previously we would crash because did not mark .rel[a] sections
as dead and they tried to access parent which was not live
after ICF and therefore was null.
Differential revision: https://reviews.llvm.org/D43241
llvm-svn: 325877
This is for fixing PR36297.
Issue itself is that if we have SECTIONS { .bar (a+b) : { *(.stub) } };
script and no section .stub, when LLD will remove .bar, but
produce output with undefined symbols a and b.
Differential revision: https://reviews.llvm.org/D43069
llvm-svn: 325875
This is relative to "Bug 36166 - tools/gold/X86/comdat.ll is failing only on Debian Unstable" (PR36166).
Something changed in newer versions of gold and now together with gold-plugin
there is an issue shown in PR, symbol may get wrong visibility.
LLD works fine, but we have no testcase for the same use case, patch adds it.
Differential revision: https://reviews.llvm.org/D43193
llvm-svn: 325874
This responds to PR36475,
r325763 led to unexprected layout change, though
new behavior seems to be more correct.
Previously we could have following script:
.foo : { *(.foo) }
.bar : { *(.synthetic_empty) BYTE(0x11) }}
where synthetic_empty is a synthetic section which is empty and
hence removed by linker.
Before r325763 .bar would receive section flags from .synthetic_empty,
but after this revision it receives flags the same as .foo section has.
It is the same as if there would not be any synthetic_empty section in a script,
so looks reasonable and consistent behavior:
.foo : { *(.foo) }
.bar : { BYTE(0x11) }}
Patch adds testcase to document it.
Differential revision: https://reviews.llvm.org/D43632
llvm-svn: 325873
We have an internal program that does't link without this patch. I don't
know of any open-source program that needs this, but there might be.
Since this patch improves compatibility with GNU linkers with a few lines
of code, I think it's worth to be committed.
The problem is about undefined symbols in DSOs. Some programs depend on
the GNU linkers' behavior that they pull out object files from archive
files to resolve undefined symbols in DSOs. We already allow that kind of
"reverse" dependency (from DSOs to the main executable) for regular
symbols, in particular, for "__progname" symbol (which is usually in
crt0.o), but that doesn't work if the symbol is in an archive file.
This patch is to make it work.
Differential Revision: https://reviews.llvm.org/D43658
llvm-svn: 325849
This reverts commit r325679 that was committed without discussion.
Actually, in the discussion thread, most people opposed to have this
option in lld. Reverting that change doesn't mean that this is a
final decision, but that needs to be discussed first.
llvm-svn: 325714
In r324043, --nopie was renamed to --no-pie to presumably fix a typo.
As it turns out, "nopie" wasn't a typo but the spelling used by
OpenBSD's binutils ld. Gold on the other hand spells the flag "no-pie".
(Vanilla binutils doesn't have a flag like this at all.)
Since they do the same thing, let's support both spellings.
llvm-svn: 325679
This removes script input file and inlines script into
testcase body. That is consistent with othet LS tests
and makes testcase easier to read.
llvm-svn: 325673
Summary:
This fixes two failing tests on Windows with an installed version of python that has spaces in the path.
* elf/lto/cache.ll
* mach-o/dependency_info.yaml
Reviewers: zturner, llvm-commits, stella.stamenova
Subscribers: emaste, arichardson
Differential Revision: https://reviews.llvm.org/D43265
llvm-svn: 325650
This patch provides migitation for CVE-2017-5715, Spectre variant two,
which affects the P5600 and P6600. It implements the LLD part of
-z hazardplt. Like the Clang part of this patch, I have opted for that
specific option name in case alternative migitation methods are required
in the future.
The mitigation strategy suggested by MIPS for these processors is to use
hazard barrier instructions. 'jalr.hb' and 'jr.hb' are hazard
barrier variants of the 'jalr' and 'jr' instructions respectively.
These instructions impede the execution of instruction stream until
architecturally defined hazards (changes to the instruction stream,
privileged registers which may affect execution) are cleared. These
instructions in MIPS' designs are not speculated past.
These instructions are defined by the MIPS32R2 ISA, so this mitigation
method is not compatible with processors which implement an earlier
revision of the MIPS ISA.
For LLD, this changes PLT stubs to use 'jalr.hb' and 'jr.hb'.
Reviewers: atanasyan, ruiu
Differential Revision: https://reviews.llvm.org/D43488
llvm-svn: 325647
Purely a rename in preparation for adding new global symbol type.
We want to use GlobalSymbol to represent real wasm globals and
DataSymbol for pointers to things in linear memory (what ELF would
call STT_OBJECT).
This reduces the size the patch to add the explicit symbol table
which is coming soon!
Differential Revision: https://reviews.llvm.org/D43476
llvm-svn: 325645
Currently, archive file name is missing in this message. In general,
we should avoid constructing strings in an ad-hoc manner and instead
use toString() to get consistent output strings.
Differential Revision: https://reviews.llvm.org/D43420
llvm-svn: 325416
We are running lld tests with "--full-shutdown" option because we don't
want to call _exit() in lld if it is running tests. Regular shutdown
is needed for leak sanitizer.
This patch changes the way how we tell lld that it is running tests.
Now "--full-shutdown" is removed, and LLD_IN_TEST environment variable
is used instead.
This patch enables full shutdown on all ports, e.g. ELF, COFF and wasm.
Previously, we enabled it only for ELF.
Differential Revision: https://reviews.llvm.org/D43410
llvm-svn: 325413
Invoking lld as ld.lld, ld.ld64, lld-link or wasm-ld is preferred
than invoking lld as lld and pass an -flavor option. We have "lld"
file mostly for historical reasons.
Differential Revision: https://reviews.llvm.org/D43407
llvm-svn: 325405
This is required after r325399:
- EF_AMDGPU_ARCH_GCN got removed
- In the test, EF_AMDGPU_ARCH_GCN is replaced with EF_AMDGPU_MACH_AMDGCN_GFX803
llvm-svn: 325400
There seems to be no reason to collect this list of symbols.
Also fix a bug where --exclude-libs would apply to all symbols that
appear in an archive's symbol table, even if the relevant archive
member was not added to the link.
Differential Revision: https://reviews.llvm.org/D43369
llvm-svn: 325380
Newer versions of the gnu assembler produce a X86_64_PLT32 for
calls. There is a change under review in llvm to do the same, so update
the tests to not depend on it.
We can still produce a R_X86_64_PC32 with ".long foo - .".
llvm-svn: 325379
This bug effected undefined symbols that were resolved by
existing defined symbols. We were skipping the signature
check in this case.
Differential Revision: https://reviews.llvm.org/D43399
llvm-svn: 325376
Reviewed by: rafael
Differential Revision: https://reviews.llvm.org/D43336
There is some discussion as to the exact behaviour of combining ICF and
--symbol-ordering-file, but it seems beneficial to warn when attempting
to order the removed symbol regardless of the preferred approach.
llvm-svn: 325333
Summary:
This follows up on r321889 where writing of Elf_Rel addends was partially
moved to RelocationBaseSection. This patch ensures that the addends are
always written to the output section when a input section uses RELA but the
output is REL.
Differential Revision: https://reviews.llvm.org/D42843
llvm-svn: 325328
Previously, we accidentally dropped STB_WEAK bit from an undefined symbol
if there is a lazy object symbol with the same name. That caused a
compatibility issue with GNU gold.
llvm-svn: 325316
Even though it doesn't make sense, there seems to be multiple programs
in the wild that create PC-relative relocations in non-ALLOC sections.
I believe this is caused by the negligence of GNU linkers to not report
any errors for such relocations.
Currently, lld emits warnings against such relocations and exits.
So, you cannot link any program that contains wrong relocations until
you fix an issue in a program that generates wrong ELF files. It's often
impractical to fix a program because it's not always easy.
This patch relaxes the error checking and emit a warning instead.
Differential Revision: https://reviews.llvm.org/D43351
llvm-svn: 325307
When we are emitting a relocatable output, we should keep the original
symbol name including "@" part. Previously, we drop that part unconditionally
which resulted in dropping versions from symbols.
Differential Revision: https://reviews.llvm.org/D43307
llvm-svn: 325204
This patch addresses a minor compatibility issue with GNU linkers.
Previously, --export-dynamic-symbol is completely ignored if you
pass --export-dynamic together.
Differential Revision: https://reviews.llvm.org/D43266
llvm-svn: 325152
There are a number of different situations when symbols are requested
to be ordered in the --symbol-ordering-file that cannot be ordered for
some reason. To assist with identifying these symbols, and either
tidying up the order file, or the inputs, a number of warnings have
been added. As some users may find these warnings unhelpful, due to how
they use the symbol ordering file, a switch has also been added to
disable these warnings.
The cases where we now warn are:
* Entries in the order file that don't correspond to any symbol in the input
* Undefined symbols
* Absolute symbols
* Symbols imported from shared objects
* Symbols that are discarded, due to e.g. --gc-sections or /DISCARD/ linker script sections
* Multiple of the same entry in the order file
Reviewed by: rafael, ruiu
Differential Revision: https://reviews.llvm.org/D42475
llvm-svn: 325125
Summary:
This protects calls to longjmp from transferring control to arbitrary
program points. Instead, longjmp calls are limited to the set of
registered setjmp return addresses.
This also implements /guard:nolongjmp to allow users to link in object
files that call setjmp that weren't compiled with /guard:cf. In this
case, the linker will approximate the set of address taken functions,
but it will leave longjmp unprotected.
I used the following program to test, compiling it with different -guard
flags:
$ cl -c t.c -guard:cf
$ lld-link t.obj -guard:cf
#include <setjmp.h>
#include <stdio.h>
jmp_buf buf;
void g() {
printf("before longjmp\n");
fflush(stdout);
longjmp(buf, 1);
}
void f() {
if (setjmp(buf)) {
printf("setjmp returned non-zero\n");
return;
}
g();
}
int main() {
f();
printf("hello world\n");
}
In particular, the program aborts when the code is compiled *without*
-guard:cf and linked with -guard:cf. That indicates that longjmps are
protected.
Reviewers: ruiu, inglorion, amccarth
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43217
llvm-svn: 325047
When decompressing a compressed debug section, we drop SHF_COMPRESSED
flag but we didn't drop "z" in ".zdebug" section name. This patch does
that for consistency.
This change also fixes the issue that .zdebug_gnu_pubnames are not
dropped when we are creating a .gdb_index section.
llvm-svn: 324949
GNU gold doesn't print out ICF sections for -verbose. It only shows
them for -print-icf-sections. We printed out them for -verbose because
we didn't have -print-icf-sections. Now that we have the option, there's
no reason to print out for -verbose.
Differential Revision: https://reviews.llvm.org/D43100
llvm-svn: 324755
This is for compatiblity with GNU gold. GNU gold tries to resolve
symbols specified by --export-dynamic-symbol. So, if a symbol specified
by --export-dynamic-symbol is in an archive file, lld's result is
currently different from gold's.
Interestingly, that behavior is different for --dynamic-list.
I added a new test to ensure that.
Differential Revision: https://reviews.llvm.org/D43103
llvm-svn: 324752
When you omit an argument, most options fall back to their defaults.
For example, --color-diagnostics is a synonym for --color-diagnostics=auto.
We don't have a way to specify the default choice for --build-id, so we
can't describe --build-id (without an argument) in that way.
This patch adds "fast" for the default build-id choice.
Differential Revision: https://reviews.llvm.org/D43032
llvm-svn: 324502
MIPS BFD linker puts _gp_disp symbol into DSO files and assigns zero
version definition index to it. This value means 'unversioned local
symbol' while _gp_disp is a section global symbol. We have to handle
this bug in the LLD because BFD linker is used for building MIPS
toolchain libraries.
Differential revision: https://reviews.llvm.org/D42486
llvm-svn: 324467
This is PR35740 which now crashes
because we remove unused synthetic sections incorrectly.
We can keep input section description and corresponding output
section live even if it must be empty and dead.
This results in a crash because SHF_LINK_ORDER handling code
tries to access first section which is nullptr in this case.
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D42681
llvm-svn: 324463
Previously --defsym=foo2=etext+2 would produce incorrect value
for foo2 because expressions did not work correctly with
reserved symbols, section offset was calculated wrong for them.
Fixes PR35744.
Differential revision: https://reviews.llvm.org/D42911
llvm-svn: 324461
Previously we ignored -plugin-opt=mcpu=<xxx>
and the only way to set CPU string was to pass
-mllvm -mcpu=<xxx>
Though clang may pass it with use of plugin options:
-plugin-opt=mcpu=x86-64
Since we are trying to be compatible in command line
with gold plugin, seems we should support it too.
Differential revision: https://reviews.llvm.org/D42956
llvm-svn: 324459
In D42733 we supported different LTO command line
options, including -debugger-tune=<value>.
Initially debugger-tune support was needed to fix PR36035.
Patch adds testcase for this option to check we
don't simply ignore it.
Differential revision: https://reviews.llvm.org/D42961
llvm-svn: 324457
This is similar to _end (See https://linux.die.net/man/3/edata for more)
but using our own unique name since our use cases will most likely be
different and we want to keep our options open WRT to memory layout.
This change will allow is to remove the DataSize from the linking
metadata section which is currently being used by emscripten to derive
the end of the data.
Differential Revision: https://reviews.llvm.org/D42867
llvm-svn: 324443
objects, it confuses codegen into generating pc-rel relocations for those
symbols, which leads to linker errors.
Differential Revision: https://reviews.llvm.org/D42977
llvm-svn: 324435
In lld this was the only use of Config->Static where it meant anything
else other than "use .a instead of .so".
If a program turns out to not use any dynamic libraries, we should
produce the same result with and without -static.
llvm-svn: 324421
With fix:
Keep logic that ignores -plugin-opt=mcpu=x86-64 -plugin-opt=thinlto,
add checks for those to testcases.
Original commit message:
[ELF] - Use InitTargetOptionsFromCodeGenFlags/ParseCommandLineOptions for parsing LTO options.
gold plugin uses InitTargetOptionsFromCodeGenFlags +
ParseCommandLineOptions for parsing LTO options.
Patch do the same change for LLD.
Such change helps to avoid parsing/whitelisting LTO
plugin options again on linker side, what can help LLD
to automatically support new -plugin-opt=xxx options
passed.
Differential revision: https://reviews.llvm.org/D42733
llvm-svn: 324340
gold plugin uses InitTargetOptionsFromCodeGenFlags +
ParseCommandLineOptions for parsing LTO options.
Patch do the same change for LLD.
Such change helps to avoid parsing/whitelisting LTO
plugin options again on linker side, what can help LLD
to automatically support new -plugin-opt=xxx options
passed.
Differential revision: https://reviews.llvm.org/D42733
llvm-svn: 324322
Summary:
This patch adds some initial support for Windows control flow guard. At
the end of the day, the linker needs to synthesize a table of RVAs very
similar to the structured exception handler table (/safeseh).
Both /safeseh and /guard:cf take sections of symbol table indices
(.sxdata and .gfids$y) and turn them into RVA tables referenced by the
load config struct in the CRT through special symbols.
Reviewers: ruiu, amccarth
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42592
llvm-svn: 324306
When using Elf_Rela every tool should use the addend in the
relocation.
We have --apply-dynamic-relocs to work around bugs in tools that don't
do that.
The default value of --apply-dynamic-relocs should be false to make
sure these bugs are more easily found in the future.
llvm-svn: 324264
When resolving dynamic RELA relocations the addend is taken from the
relocation and not the place being relocated. Accordingly lld does not
write the addend field to the place like it would for a REL relocation.
Unfortunately there is some system software, in particlar dynamic loaders
such as Bionic's linker64 that use the value of the place prior to
relocation to find the offset that they have been loaded at. Both gold
and bfd control this behavior with the --[no-]apply-dynamic-relocs option.
This change implements the option and defaults it to true for compatibility
with gold and bfd.
Differential Revision: https://reviews.llvm.org/D42797
llvm-svn: 324221
We did not report valid filename for duplicate symbol error when
symbol came from binary input file.
Patch fixes it.
Differential revision: https://reviews.llvm.org/D42635
llvm-svn: 324217
Initially LLD generates Elf_Rel relocations for O32 ABI and Elf_Rela
relocations for N32 / N64 ABIs. In other words, format of input and
output relocations was always the same. Now LLD generates all output
relocations using Elf_Rel format only. It conforms to ABIs requirement.
The patch suggested by Alexander Richardson.
llvm-svn: 324064
--nopie was a typo. GNU gold doesn't recognize it. It is also
inconsistent with other options that have --foo and --no-foo.
Differential Revision: https://reviews.llvm.org/D42825
llvm-svn: 324043
In GNU linkers, the last semicolon is optional. We can't link libstdc++
with lld because of that difference.
Differential Revision: https://reviews.llvm.org/D42820
llvm-svn: 324036
Currently ICF information is output through stderr if the "--verbose"
flag is used. This differs to Gold for example, which uses an explicit
flag to output this to stdout. This commit adds the
"--print-icf-sections" and "--no-print-icf-sections" flags and changes
the output message format for clarity and consistency with
"--print-gc-sections". These messages are still output to stderr if
using the verbose flag. However to avoid intermingled message output to
console, this will not occur when the "--print-icf-sections" flag is
used.
Existing tests have been modified to expect the new message format from
stderr.
Patch by Owen Reynolds.
Differential Revision: https://reviews.llvm.org/D42375
Reviewers: ruiu, rafael
Reviewed by:
llvm-svn: 323976
Don't include type signatures that are not referenced by
some relocation.
We don't include this in the -gc-sections settings since
we are always building the type section from scratch,
just like we do the table elements.
In the future we might want to unify the relocation
processing which is currently done once for gc-sections
and then again for building the sympathetic type and
table sections.
Differential Revision: https://reviews.llvm.org/D42747
llvm-svn: 323931
Summary:
r323164 made lld-link not overwrite import libraries when their
contents haven't changed. MSVC's link.exe does this only when
performing incremental linking. This change makes lld-link's import
library overwriting similarly dependent on whether or not incremental
linking is being performed. This is controlled by the /incremental or
/incremental:no options. In addition, /opt:icf, /opt:ref, and /order
turn off /incremental and issue a warning if /incremental was
specified on the command line.
Reviewers: rnk, ruiu, zturner
Reviewed By: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42716
llvm-svn: 323930
Summary: Instead of fatal-ing out when missing a type server PDB, insead warn and cache the miss.
Reviewers: rnk, zturner
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42188
llvm-svn: 323893
Summary:
While trying to make a linker script behave the same way with lld as it did
with bfd, I discovered that lld currently doesn't diagnose overlapping
output sections. I was getting very strange runtime failures which I
tracked down to overlapping sections in the resulting binary. When linking
with ld.bfd overlapping output sections are an error unless
--noinhibit-exec is passed and I believe lld should behave the same way
here to avoid surprising crashes at runtime.
The patch also uncovered an errors in the tests: arm-thumb-interwork-thunk
was creating a binary where .got.plt was placed at an address overlapping
with .got.
Reviewers: ruiu, grimar, rafael
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D41046
llvm-svn: 323856
When there is a duplicate absolute symbol, LLD reports <internal>
instead of known object file name currently.
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D42636
llvm-svn: 323849
In this initial version we only GC symbols with `hidden` visibility since
other symbols we export to the embedder.
We could potentially modify this the future and only use symbols
explicitly passed via `--export` as GC roots.
This version of the code only does GC of data and code. GC for the
types section is coming soon.
Differential Revision: https://reviews.llvm.org/D42511
llvm-svn: 323842
Add a simple start entry point input file and have the tests
reference that rather than duplicating these.
This allows more tests to be pure `.test` files rather than
`.ll`.
Differential Revision: https://reviews.llvm.org/D42662
llvm-svn: 323838
Previously an empty CPU string was passed to the LTO engine which
resulted in a generic CPU for which certain features like NOPL were
disabled. This fixes that.
Patch by Pratik Bhatu!
llvm-svn: 323801
Currently symbols assigned or created by linkerscript are not processed early
enough. As a result it is not possible to version them or assign any other flags/properties.
Patch creates Defined symbols for -defsym and linkerscript symbols early,
so that issue from above can be addressed.
It is based on Rafael Espindola's version of D38239 patch.
Fixes PR34121.
Differential revision: https://reviews.llvm.org/D41987
llvm-svn: 323729
I didn't implement the feature in the original patch because I didn't
come up with an idea to do that easily and efficiently. Turned out that
that is actually easy to implement.
In this patch, we collect comdat sections before gc is run and warn on
nonexistent symbols in an order file.
Differential Revision: https://reviews.llvm.org/D42658
llvm-svn: 323699
This should fix PR36017.
The root problem is that we were creating a PT_LOAD just for the
header. That was technically valid, but inconvenient: we should not be
making the ELF discontinuous.
The solution is to allow a section with LMAExpr to be added to a
PT_LOAD if that PT_LOAD doesn't already have a LMAExpr.
llvm-svn: 323625
Patch adds one more module with non-prevailing
version of asm symbol, defined in main module
This is for D42107, which is under review.
Extended version of testcase would fail with the
diff 9 version of patch posted.
llvm-svn: 323584
With the /order option, you can give an order file. An order file
contains symbol names, one per line, and the linker places comdat
sections in that given order. The option is used often to optimize
an output binary for (in particular, startup) speed by improving
locality.
Differential Revision: https://reviews.llvm.org/D42598
llvm-svn: 323579
This fixes the crash reported at PR36083.
The issue is that we were trying to put all the sections in the same
PT_LOAD and crashing trying to write past the end of the file.
This also adds accounting for used space in LMARegion, without it all
3 PT_LOADs would have the same physical address.
llvm-svn: 323449
Previously, we were ensuring that the "output index" for
InputFunctions was unique across all symbols that referenced
a function body, but allowing the same function body to have
multiple table indexes.
Now, we use the same mechanism for table indexes as we already
do for output indexes, ensuring that each InputFunction is only
placed in the table once.
This makes the LLD output table denser and smaller, but should
not change the behaviour.
Note that we still need the `Symbol::TableIndex` member, to
store the table index for function Symbols that don't have an
InputFunction, i.e. for address-taken imports.
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D42476
llvm-svn: 323379
Previously llvm was using 0 as the first table index for wasm object
files but now that has switched to 1 we can have the output of lld
do the same and simplify the code.
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D42096
llvm-svn: 323378
Since SyntheticSection::getParent() may return null, dereferencing
this pointer in ARMExidxSentinelSection::empty() call from
removeUnusedSyntheticSections() results in crashes when linking ARM
binaries.
Patch by vit9696!
llvm-svn: 323366
This is somewhat preferable since (in many cases) it allows llc
to be run directly on the .ll files without having to pass the
`-mtriple` argument.
Differential Revision: https://reviews.llvm.org/D42438
llvm-svn: 323299
There seems to be an bug related to table relocations not being
written correctly in this case. This change is intended simply
to increase the coverage, not fix the issue.
llvm-svn: 323282
TABLE relocations now store the function that is being refered
to indirectly.
See rL323165.
Also extend the call-indirect.ll a little.
Based on a patch by Nicholas Wilson!
llvm-svn: 323168
Summary:
This detects when an import library is about to be overwritten with a
newly built one with the same contents, and keeps the old library
instead. The use case for this is to avoid needlessly rebuilding
targets that depend on the import library in build systems that rely
on timestamps to determine whether a target requires rebuilding.
This feature was requested in PR35917.
Reviewers: rnk, ruiu, zturner, pcc
Reviewed By: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42326
llvm-svn: 323164
Summary:
First, we need to explain the core of the vulnerability. Note that this
is a very incomplete description, please see the Project Zero blog post
for details:
https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html
The basis for branch target injection is to direct speculative execution
of the processor to some "gadget" of executable code by poisoning the
prediction of indirect branches with the address of that gadget. The
gadget in turn contains an operation that provides a side channel for
reading data. Most commonly, this will look like a load of secret data
followed by a branch on the loaded value and then a load of some
predictable cache line. The attacker then uses timing of the processors
cache to determine which direction the branch took *in the speculative
execution*, and in turn what one bit of the loaded value was. Due to the
nature of these timing side channels and the branch predictor on Intel
processors, this allows an attacker to leak data only accessible to
a privileged domain (like the kernel) back into an unprivileged domain.
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In many
cases, the compiler can simply use directed conditional branches and
a small search tree. LLVM already has support for lowering switches in
this way and the first step of this patch is to disable jump-table
lowering of switches and introduce a pass to rewrite explicit indirectbr
sequences into a switch over integers.
However, there is no fully general alternative to indirect calls. We
introduce a new construct we call a "retpoline" to implement indirect
calls in a non-speculatable way. It can be thought of loosely as
a trampoline for indirect calls which uses the RET instruction on x86.
Further, we arrange for a specific call->ret sequence which ensures the
processor predicts the return to go to a controlled, known location. The
retpoline then "smashes" the return address pushed onto the stack by the
call with the desired target of the original indirect call. The result
is a predicted return to the next instruction after a call (which can be
used to trap speculative execution within an infinite loop) and an
actual indirect branch to an arbitrary address.
On 64-bit x86 ABIs, this is especially easily done in the compiler by
using a guaranteed scratch register to pass the target into this device.
For 32-bit ABIs there isn't a guaranteed scratch register and so several
different retpoline variants are introduced to use a scratch register if
one is available in the calling convention and to otherwise use direct
stack push/pop sequences to pass the target address.
This "retpoline" mitigation is fully described in the following blog
post: https://support.google.com/faqs/answer/7625886
We also support a target feature that disables emission of the retpoline
thunk by the compiler to allow for custom thunks if users want them.
These are particularly useful in environments like kernels that
routinely do hot-patching on boot and want to hot-patch their thunk to
different code sequences. They can write this custom thunk and use
`-mretpoline-external-thunk` *in addition* to `-mretpoline`. In this
case, on x86-64 thu thunk names must be:
```
__llvm_external_retpoline_r11
```
or on 32-bit:
```
__llvm_external_retpoline_eax
__llvm_external_retpoline_ecx
__llvm_external_retpoline_edx
__llvm_external_retpoline_push
```
And the target of the retpoline is passed in the named register, or in
the case of the `push` suffix on the top of the stack via a `pushl`
instruction.
There is one other important source of indirect branches in x86 ELF
binaries: the PLT. These patches also include support for LLD to
generate PLT entries that perform a retpoline-style indirection.
The only other indirect branches remaining that we are aware of are from
precompiled runtimes (such as crt0.o and similar). The ones we have
found are not really attackable, and so we have not focused on them
here, but eventually these runtimes should also be replicated for
retpoline-ed configurations for completeness.
For kernels or other freestanding or fully static executables, the
compiler switch `-mretpoline` is sufficient to fully mitigate this
particular attack. For dynamic executables, you must compile *all*
libraries with `-mretpoline` and additionally link the dynamic
executable and all shared libraries with LLD and pass `-z retpolineplt`
(or use similar functionality from some other linker). We strongly
recommend also using `-z now` as non-lazy binding allows the
retpoline-mitigated PLT to be substantially smaller.
When manually apply similar transformations to `-mretpoline` to the
Linux kernel we observed very small performance hits to applications
running typical workloads, and relatively minor hits (approximately 2%)
even for extremely syscall-heavy applications. This is largely due to
the small number of indirect branches that occur in performance
sensitive paths of the kernel.
When using these patches on statically linked applications, especially
C++ applications, you should expect to see a much more dramatic
performance hit. For microbenchmarks that are switch, indirect-, or
virtual-call heavy we have seen overheads ranging from 10% to 50%.
However, real-world workloads exhibit substantially lower performance
impact. Notably, techniques such as PGO and ThinLTO dramatically reduce
the impact of hot indirect calls (by speculatively promoting them to
direct calls) and allow optimized search trees to be used to lower
switches. If you need to deploy these techniques in C++ applications, we
*strongly* recommend that you ensure all hot call targets are statically
linked (avoiding PLT indirection) and use both PGO and ThinLTO. Well
tuned servers using all of these techniques saw 5% - 10% overhead from
the use of retpoline.
We will add detailed documentation covering these components in
subsequent patches, but wanted to make the core functionality available
as soon as possible. Happy for more code review, but we'd really like to
get these patches landed and backported ASAP for obvious reasons. We're
planning to backport this to both 6.0 and 5.0 release streams and get
a 5.0 release with just this cherry picked ASAP for distros and vendors.
This patch is the work of a number of people over the past month: Eric, Reid,
Rui, and myself. I'm mailing it out as a single commit due to the time
sensitive nature of landing this and the need to backport it. Huge thanks to
everyone who helped out here, and everyone at Intel who helped out in
discussions about how to craft this. Also, credit goes to Paul Turner (at
Google, but not an LLVM contributor) for much of the underlying retpoline
design.
Reviewers: echristo, rnk, ruiu, craig.topper, DavidKreitzer
Subscribers: sanjoy, emaste, mcrosier, mgorny, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D41723
llvm-svn: 323155
This was added to mimic ELF, but maintaining it has cost
and we currently don't have any use for it outside of the
test code.
Differential Revision: https://reviews.llvm.org/D42324
llvm-svn: 323154
It is possible for a link to fail with an undefined reference, unless
--gc-sections is specified, removing the reference in the process. This
doesn't look to be tested anywhere explicitly, so I thought it useful
to add a test for it to ensure the behaviour is maintained.
Reviewers: ruiu
Differential Revision: https://reviews.llvm.org/D42299
llvm-svn: 323099
Its much easier to export it via setHidden(false), now that
that is a thing.
As a side effect the start function is not longer always exports first
(becuase its being exported just like all the other function).
Differential Revision: https://reviews.llvm.org/D42321
llvm-svn: 323025
This code was needed back when we were not able to write
out the synthetic symbol for main.
Add tests to make sure we can handle this now.
Differential Revision: https://reviews.llvm.org/D42322
llvm-svn: 323020
We need these import since relocations are generated against them.
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D42305
llvm-svn: 322990
This solves the problem that --emit-relocs needs the stack-pointer
to be exported, in order to write out any relocations that reference
the __stack_pointer symbol by its symbol index.
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D42237
llvm-svn: 322911
When writing relocatable files we were exporting for all globals
(including file-local syms), but not for functions. Oops. To be
consistent with non-relocatable output, all symbols (file-local
and global) should be exported. Any symbol targetted by further
relocations needs to be exported. The lack of local function
exports was just an omission, I think.
Second bug: Local symbol names can collide, causing an illegal
Wasm file to be generated! Oops again. This only previously affected
producing relocatable output from two files, where each had a global
with the same name. We need to "budge" the symbol names for locals
that are exported on relocatable output.
Third bug: LLD's relocatable output wasn't writing out any symbol
flags! Thus the local globals weren't being marked as local, and
the hidden flag was also stripped...
Added tests to exercise colliding local names with/without
relocatable flag
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D42105
llvm-svn: 322908
The problem we had with it is that anything inside an AT is an
expression, so we failed to parse the section name because of the - in
it.
llvm-svn: 322801
Simplify generation of "names" section by simply iterating
over the DefinedFunctions array.
This even fixes some bugs, judging by the test changes required.
Some tests are asserting that functions are named multiple times,
other tests are asserting that the "names" section contains the
function's alias rather than its original name
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D42076
llvm-svn: 322751
Previously we always handled -defsym after other commands in command line.
That made impossible to overload values set by -defsym from linker script:
test.script:
foo = 0x22;
-defsym=foo=0x11 -script t.script
would always set foo to 0x11.
That is inconstent with common logic which allows to override command line
options. it is inconsistent with bfd behavior and seems breaks assumption that
-defsym is the same as linker script assignment, as -defsyms always handled out of
command line order.
Patch fixes the handling order.
Differential revision: https://reviews.llvm.org/D42054
llvm-svn: 322625
This is an immutable exported global representing
the start of the heap area. It is a page aligned.
Differential Revision: https://reviews.llvm.org/D42030
llvm-svn: 322609
We track both the combined visibility that will be used for the output
symbol and the original input visibility of the selected symbol.
Almost everything should use the computed visibility.
I will make the names less confusing an a followup patch.
llvm-svn: 322576
When a section placement (AT) command references the section itself,
the physical address of the section in the ELF header was calculated
incorrectly due to alignment happening right after the location
pointer's value was captured.
The problem was diagnosed and the first version of the patch written
by Erick Reyes.
llvm-svn: 322421
See https://bugs.llvm.org/show_bug.cgi?id=35533, and D40844
Things covered:
* Removing duplicate data segments (as determined by COMDATs emitted
by the frontend)
* Removing duplicate globals and functions in COMDATs
* Checking that each time a COMDAT is seen it has the same symbols
as at other times (ie it's a stronger check than simply giving all
the symbols in the COMDAT weak linkage)
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D40845
llvm-svn: 322415
This is useful for emscripten or other tools that want to
selectively exports symbols without necessarily changing the
source code.
Differential Revision: https://reviews.llvm.org/D42003
llvm-svn: 322408
Even though a function can have multiple names in the
linking standards (i.e. due to aliases), there can only
be one name for a given function in the NAME section.
Differential Revision: https://reviews.llvm.org/D41975
llvm-svn: 322383
Previously we checked (HeaderSize == 0) to find out if
PltSection section is IPLT or PLT. Some targets does not set
HeaderSize though. For example PPC64 has no lazy binding implemented
and does not set PltHeaderSize constant.
Because of that using of both IPLT and PLT relocations worked
incorrectly there (testcase is provided).
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D41613
llvm-svn: 322362
AT> lma_region expression allows to specify the memory region
for section load address.
Should fix PR35684.
Differential revision: https://reviews.llvm.org/D41397
llvm-svn: 322359
This allows libraries to supply a list of symbols which are
allowed to be undefined at link time (i.e. result in imports).
This method replaces the existing mechanism (-allow-undefined-file)
used by the clang driver to allow undefined symbols in libc.
For more on motivation for this see:
https://github.com/WebAssembly/tool-conventions/issues/35
In the long run we hope to remove this features and instead
include this information in the object format itself.
Differential Revision: https://reviews.llvm.org/D41922
llvm-svn: 322320
When setting up the chain, we copy over the bucket's previous symbol
index, assuming that this index will be 0 (STN_UNDEF) for an unused
bucket (marking the end of the chain). When linking with --no-rosegment,
however, unused buckets will in fact contain the padding value, and so
the hash table will end up containing invalid chains. Zero out the hash
table section explicitly to avoid this, similar to what's already done
for GNU hash sections.
Differential Revision: https://reviews.llvm.org/D41928
llvm-svn: 322259
When we have --icf=safe we should be able to define --icf=all as a
shorthand for --icf=safe --ignore-function-address-equality.
For now --ignore-function-address-equality is used only to control
access to non preemptable symbols in shared libraries.
llvm-svn: 322152
This splits relocation processing in two steps.
First, analyze what needs to be done at the relocation spot. This can
be a constant (non preemptible symbol, relative got reference, etc) or
require a dynamic relocation. At this step we also consider creating
copy relocations.
Once that is done we decide if we need a got or a plt entry.
The code is simpler IMHO. For example:
- There is a single call to isPicRel since the logic is not split
among adjustExpr and the caller.
- R_MIPS_GOTREL is simple to handle now.
- The tracking of what is preemptible or not is much simpler now.
This also fixes a regression with symbols being both in a got and copy
relocated. They had regressed in r268668 and r268149.
The other test changes are because of error messages changes or the
order of two relocations in the output.
llvm-svn: 322047
The addresses of undefined symbols that make it into the final
executable (i.e. weak references to non-existent symbols) should
resolve to zero.
Also, make sure to not include function in the indirect function
table if they are not included in the output.
Differential Revision: https://reviews.llvm.org/D41839
llvm-svn: 322045
These tests started failing because we now properly convert
DefRange records to and from Yaml, but there were some old yaml
files that had incorrect record definitions generated by the
old buggy obj2yaml. Rather than try to re-generate the yaml files,
it's easier to just remove the records, and they weren't necessary
for the proper execution of the test anyway.
llvm-svn: 322040
The problem was that our Obj -> Yaml dumper had not been taught
to handle certain types of records. This meant that when I
generated the test input files, the records were still there but
none of its fields were filled out. So when it did the
Yaml -> Obj conversion as part of the test, it generated records
with garbage in them.
The patch here fixes the Obj <-> Yaml converter, and additionally
updates the test file with fresh Yaml generated by the fixed
converter.
llvm-svn: 322029
Previously, in r320472, I moved the calculation of section offsets and sizes
for compressed debug sections into maybeCompress, which happens before
assignAddresses, so that the compression had the required information. However,
I failed to take account of relocations that patch such sections. This had two
effects:
1. A race condition existed when a debug section referred to a different debug
section (see PR35788).
2. References to symbols in non-debug sections would be patched incorrectly.
This is because the addresses of such symbols are not calculated until after
assignAddresses (this was a partial regression caused by r320472, but they
could still have been broken before, in the event that a custom layout was used
in a linker script).
assignAddresses does not need to know about the output section size of
non-allocatable sections, because they do not affect the value of Dot. This
means that there is no longer a reason not to support custom layout of
compressed debug sections, as far as I'm aware. These two points allow for
delaying when maybeCompress can be called, removing the need for the loop I
previously added to calculate the section size, and therefore the race
condition. Furthermore, by delaying, we fix the issues of relocations getting
incorrect symbol values, because they have now all been finalized.
llvm-svn: 321986
LLD previously used to handle dynamic lists and version scripts in the
exact same way, even though they have very different semantics for
shared libraries and subtly different semantics for executables. r315114
untangled their semantics for executables (building on previous work to
correct their semantics for shared libraries). With that change, dynamic
lists won't set the default version to VER_NDX_LOCAL, and so resetting
the version to VER_NDX_GLOBAL in scanShlibUndefined is unnecessary.
This was causing an issue because version scripts containing `local: *`
work by setting the default version to VER_NDX_LOCAL, but scanShlibUndefined
would override this default, and therefore symbols which should have
been local would end up in the dynamic symbol table, which differs from
both bfd and gold's behavior. gold silently keeps the symbol hidden in
such a scenario, whereas bfd issues an error. I prefer bfd's behavior
and plan to implement that in LLD in a follow-up (and the test case
added here will be updated accordingly).
Differential Revision: https://reviews.llvm.org/D41639
llvm-svn: 321982
This is not a record type that clang currently generates,
but it is a record that is encountered in object files generated
by cl. This record is unusual in that it refers directly to
the string table instead of indirectly to the string table via
the FileChecksums table. Because of this, it was previously
overlooked and we weren't remapping the string indices at all.
This would lead to crashes in MSVC when trying to display a
variable whose debug info involved an S_FILESTATIC.
Original bug report by Alexander Ganea
Differential Revision: https://reviews.llvm.org/D41718
llvm-svn: 321883
We normally want to ignore SHT_NOBITS sections when computing
offsets. The sh_offset of section itself seems to be irrelevant and
- If the section is in the middle of a PT_LOAD, it will make no
difference on the computed offset of the followup section.
- If it is in the end of a PT_LOAD, we want to avoid its alignment
changing the offset of the followup sections.
The issue is if it is at the start of the PT_LOAD. In that case we do
have to align it so that the following sections have congruent address
and offset module the page size. We were not handling this case.
This should fix freebsd kernel link.
llvm-svn: 321657
This is "Bug 35751 - .dynamic relocation entries omitted if output
contains only IFUNC relocations"
We have InX::RelaPlt and InX::RelaIPlt synthetic sections for PLT relocations.
They are usually live in rela.plt section. Problem appears when InX::RelaPlt
section is empty. In that case we did not produce normal set of dynamic tags
required, because logic was written in the way assuming we always have
non-IRelative relocations in rela.plt.
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D41592
llvm-svn: 321600
If using a version script with a `local: *` in it, symbols in shared
libraries will still get default visibility if another shared library on
the link line has an undefined reference to the symbol. This is quite
surprising. Neither bfd nor gold have this behavior when linking a
shared library, and none of LLD's tests fail without this behavior, so
it seems safe to limit scanShlibUndefined to executables.
As far as executables are concerned, gold doesn't do any automatic
default visibility marking, and bfd issues a link error about a shared
library having a reference to a hidden symbol rather than silently
giving that symbol default visibility. I think bfd's behavior here is
preferable to LLD's, but that's something to be considered in a
follow-up.
Differential Revision: https://reviews.llvm.org/D41524
llvm-svn: 321578
Summary:
lld-link accepts link.exe's /ignore option, but used to ignore
it. This can lead to semantic differences when warnings are treated as
fatal errors. One such case is when we resolve an __imp_ symbol to a
local definition. We emit a warning in that case, which /wx turns into
a fatal. This change makes lld-link accept /ignore:4217 to suppress
that warning, so that code that links with link.exe /wx /ignore:4217
links with lld-link, too.
Fixes PR35762.
Reviewers: rnk, ruiu
Reviewed By: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41606
llvm-svn: 321512
This makes adjustExpr a bit simpler too IMHO.
It seems that some of the complication around relocation processing
is that we are trying to create copy relocations too early. It seems
we could handle a few simple cases first and continue.
llvm-svn: 321507
Previously we failed to resolve them when produced executables:
"relocation R_X86_64_32 cannot be used against shared object; recompile with -fPIC"
Patch fixes it so that we resolve them to 0 for executables.
And for -shared case we still should produce the relocation.
This finishes fixing PR35720.
DIfferential revision: https://reviews.llvm.org/D41551
llvm-svn: 321473
If a relocation cannot be implemented by the dynamic linker and the
section is rw, allow creating a plt entry to use as the function
address as if the section was ro.
This matches bfd and gold. It also matches our behavior with -z
notext.
llvm-svn: 321430
Advance the memory region offset when handling a linker script data
command such as BYTE or LONG. Failure to advance the offset results
in corrupted output with overlapping sections.
Update tests to check for this combination of both a) memory regions
and b) data commands.
Fixes https://bugs.llvm.org/show_bug.cgi?id=35565
Patch by Owen Shaw!
llvm-svn: 321418
This is part of PR35720.
Currently LLD allows dynamic relocations against text when -z notext is given.
Though for non-PIC relocations like R_X86_64_PC32 that does not work,
we produce "relocation R_X86_64_PC32 cannot be used against shared object;"
error because they may overflow in runtime.
Solution implemented is to use PLT for them.
Differential revision: https://reviews.llvm.org/D41541
llvm-svn: 321400
When two linker script symbols are subtracted, the result should be absolute.
This is the behavior of binutils' ld.
Patch by Erick Reyes!
llvm-svn: 321390
Summary:
Currently the test only checks behaviour for weak function symbols.
Should be good to merge straight away?
Reviewers: sbc100
Reviewed By: sbc100
Subscribers: jfb, dschuff, jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D41449
llvm-svn: 321308
In this case we are calling a function pointer which
a type that doesn't otherwise exist in the code.
Clearly this code can't would trap if it was ever
called (because there is not such function that
the pointer can resolve to).
But it should valid and compile and link and validation
time.
llvm-svn: 321134
This change add support for init functions in the linking
section, but only in -r/--relocatable mode.
Differential Revision: https://reviews.llvm.org/D41375
llvm-svn: 321088
A more efficient PLT sequence can be used when the distance between the
.plt and the end of the .plt.got is less than 128 Megabytes, which is
frequently true. We fall back to the old sequence when the offset is larger
than 128 Megabytes. This gives us an alternative to forcing the longer
entries with --long-plt as we gracefully fall back to it as needed.
See ELF for the ARM Architecture Appendix A for details of the PLT sequence.
Differential Revision: https://reviews.llvm.org/D41246
llvm-svn: 320987
Summary:
1. Use stream 0 only for combined module. Previously if combined module was not
processes ThinLTO used the stream for own output. However small changes in input,
could trigger combined module and shuffle outputs making life of llvm::LTO harder.
2. Always process combined module and write output to stream 0. Processing empty
combined module is cheap and allows llvm::LTO users to avoid implementing processing
which is already done in llvm::LTO.
Subscribers: mehdi_amini, inglorion, eraman, hiraditya
Differential Revision: https://reviews.llvm.org/D41267
llvm-svn: 320905
/debug and /debug:dwarf are orthogonal. An object file can contain both
CodeView and DWARF debug info, so the combination of /debug:dwarf and
/debug should generate both DWARF and a PDB, rather than /debug:dwarf
always suppressing PDB creation.
/nopdb is now redundant and can be removed. /debug /nopdb was previously
used to support DWARF, but specifying /debug:dwarf is entirely
equivalent to that combination now.
Differential Revision: https://reviews.llvm.org/D41310
llvm-svn: 320896
We only need to exceed 128 Megabytes to provoke the generation of a range
extension thunk. This brings the file size down to just over 128 Megabytes.
llvm-svn: 320821
I noticed that the continue this patch deletes was not tested. Trying
to add a test I realized that we never put a VER_NDX_LOCAL symbol in
the dynamic symbol table. There doesn't seem to be any reason for a
linker to use VER_NDX_LOCAL for a defined shared symbol.
llvm-svn: 320817
The ARM.exidx section contains a table of 8-byte entries with the first
word of each entry an offset to the function it describes and the second
word instructions for unwinding if an exception is thrown from that
function. The SHF_LINK_ORDER processing will order the table in ascending
order of the functions described by the exception table entries. As the
address range of an exception table entry is terminated by the next table
entry, it is possible to merge consecutive table entries that have
identical unwind instructions.
For this implementation we define a table entry to be identical if:
- Both entries are the special EXIDX_CANTUNWIND.
- Both entries have the same inline unwind instructions.
We do not attempt to establish if table entries that are references to
.ARM.extab sections are identical.
This implementation works at a granularity of a single .ARM.exidx
InputSection. If all entries in the InputSection are identical to the
previous table entry we can remove the InputSection. A more sophisticated
but more complex implementation would rewrite InputSection contents so that
duplicates within a .ARM.exidx InputSection can be merged.
Differential Revision: https://reviews.llvm.org/D40967
llvm-svn: 320803
This patch provides the mechanism to fix instances of the instruction
sequence that may trigger the cortex-a53 843419 erratum. The fix is
provided by an alternative instruction sequence to remove one of the
erratum conditions. To reach this alternative instruction sequence we
replace the original instruction with a branch to the alternative
sequence. The alternative sequence is responsible for branching back to
the original.
As there is only erratum to fix the implementation is specific to
AArch64 and the specific erratum conditions. It should be generalizable
to other targets and erratum if needed.
Differential Revision: https://reviews.llvm.org/D36749
llvm-svn: 320800
Windows paths have colons in them, so the regex will fail there. Just
match for any character; the rest of the message will restrict the match
to the path anyway.
llvm-svn: 320793
Locally imported symbols are a very surprising linker feature. link.exe
warns for them, and we should warn too.
Differential Revision: https://reviews.llvm.org/D41269
llvm-svn: 320792
Specifically, libwidevinecdm.so in Chrome has such bad symbol.
It seems the BFD linker handles them as local symbols, so instead
of inserting them to the symbol table, we should skip them too.
Differential Revision: https://reviews.llvm.org/D41257
llvm-svn: 320770
This adds the /DEBUG:GHASH option to LLD which will look for
the existence of .debug$H sections in linker inputs and use them
to accelerate type merging. The clang-cl side has already been
added, so this completes the work necessary to begin experimenting
with this feature.
Differential Revision: https://reviews.llvm.org/D40980
llvm-svn: 320719
This is similar to what was added in SVN r277838 for 24 bit
branch instructions.
Differential Revision: https://reviews.llvm.org/D41163
llvm-svn: 320677
This works for linking the output from the MSVC compiler.
The pdata entries for arm64 seem to be 8 bytes in the same
(or at least similar) form to arm.
Differential Revision: https://reviews.llvm.org/D41160
llvm-svn: 320676
We might crash in 'ARMExidxSentinelSection::writeTo()' because it expected
the sentinel entry to be put in the same 'InputSectionDescription' as
the last real entry. This assumption fails if the last output section command
for .ARM.exidx is anything but an input section description, because in this
case 'OutputSection::addSection()' creates a new 'InputSectionDescription'.
Differential Revision: https://reviews.llvm.org/D41105
llvm-svn: 320668
The linker refuses using -dynamicbase:no on these architectures.
Stop passing -dynamicbase (which just reinforces the lld-link
default) for simplicity.
Differential Revision: https://reviews.llvm.org/D41052
llvm-svn: 320518
The size of an OutputSection is calculated early, to aid handling of compressed
debug sections. However, subsequent to this point, unused synthetic sections are
removed. In the event that an OutputSection, from which such an InputSection is
removed, is still required (e.g. because it has a symbol assignment), and no longer
has any InputSections, dot assignments, or BYTE()-family directives, the size
member is never updated when processing the commands. If the removed InputSection
had a non-zero size (such as a .got.plt section), the section ends up with the
wrong size in the output.
The fix is to reset the OutputSection size prior to processing the linker script
commands relating to that OutputSection. This ensures that the size is correct even
in the above situation.
Additionally, to reduce the risk of developers misusing OutputSection Size and
InputSection OutSecOff, they are set to simply the number of InputSections in an
OutputSection, and the corresponding index respectively. We cannot completely
stop using them, due to SHF_LINK_ORDER sections requiring them.
Compressed debug sections also require the full size. This is now calculated in
maybeCompress for these kinds of sections.
Reviewers: ruiu, rafael
Differential Revision: https://reviews.llvm.org/D38361
llvm-svn: 320472
An internal linker has support for merging identical data and in some
cases it can be a significant win.
This is behind an off by default flag so it has to be requested
explicitly.
llvm-svn: 320448
Also make function bodies unique so they can be distinguished
in the output. This is helpful for adding support for --gc-sections.
Differential Revision: https://reviews.llvm.org/D41093
llvm-svn: 320441
When an output section has no byte commands and has no input sections then it
would be ideal if the type of the section is SHT_NOBITS so that the file can
take up less space. This change sets the default type of of output sections to
SHT_NOBITS instead of SHT_PROGBITS to allow this. This required some minor test
changes (which double as tests for this new behavior) but extend-pt-load.s had
be changed in a non-trivial way. Since it seems to me that the point of the
test is to point out the consequences of how flags are assigned to output
sections that don't have input sections I changed the test to work and still
show how the memsize of the executable segment was changed.
Differential Revision: https://reviews.llvm.org/D41082
llvm-svn: 320437
In the following command line,
lld-link foo/bar.lib /defaultlib:bar.lib
"/defaultlib:bar.lib" should be a nop even if a file with the same
name exists in other library search path.
Fixes https://bugs.llvm.org/show_bug.cgi?id=35476
Differential Revision: https://reviews.llvm.org/D41094
llvm-svn: 320434
Create the indirect function table based on symbols rather
than just duplicating the input entries. This has the
effect of de-duplicating the table.
This is a followup to the equivalent change made for globals:
https://reviews.llvm.org/D40859
Partially based on a patch by Nicholas Wilson:
https://reviews.llvm.org/D40845
Differential Revision: https://reviews.llvm.org/D40989
llvm-svn: 320428
log are also diagnostics so it seems like they should to
the same place as errors and debug messages.
Without this change when I enable --verbose those messages
go to stdout, but when I enable "-mllvm -debug" those messages
go to stderr (because dbgs() goes to stderr by default).
So I end up having to do this a lot:
lld <args> > output_message 2>&1
Differential Revision: https://reviews.llvm.org/D41033
llvm-svn: 320427
Now that gc sections runs after linker defined symbols are added it
can see symbols that point to an OutputSection.
Should fix a bot failure.
llvm-svn: 320412
This fixes pr35570.
We were creating these symbols after parsing version scripts, so they
could not be versioned.
We cannot move the version script parsing later because we need it for
lto.
One option is to move both addReservedSymbols and
createSyntheticSections earlier. The disadvantage is that some
sections created by createSyntheticSections replace other input
sections. For example, gdb index replaces .debug_gnu_pubnames, so it
wants to run after gc sections so that it can set S->Live to false.
What this patch does instead is to move just the ElfHeader creation
early.
llvm-svn: 320390
Add test for weakly defined symbols with the same name
Improve test for call-indirect to include the same call in two
different objects. This lays the ground work to improve the
output via de-duplicating the indirect call table:
https://reviews.llvm.org/D40989
Also make all tests consistently pass -mtriple rather than
declaring in the sources.
Differential Revision: https://reviews.llvm.org/D41024
llvm-svn: 320172
This adds a `--no-entry` argument to wasm LLD used to
suppress the default `_start` entry point.
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D40725
llvm-svn: 320167
Summary:
I also changed the message to print both the ISA and the the architecture
name for incompatible files. Previously it would be quite hard to find the
actual path of the incompatible object files in projects that have many
object files with the same name in different directories.
Reviewers: atanasyan, ruiu
Reviewed By: atanasyan
Subscribers: emaste, sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D40958
llvm-svn: 320056
Adds a new argument to wasm-lld, `--undefined`, with
similar semantics to the ELF linker. It pulls in symbols
from files contained within a `.a` archive, forcing them
to be included even if the translation unit would not
otherwise be pulled in.
Patch by Nicholas Wilson
Differential Revision: https://reviews.llvm.org/D40724
llvm-svn: 320004
This change cleans up the way wasm exports and globals
are generated, particualrly for -r/--relocatable where
globals need to be created and exported in order for
output relocations which reference them.
Remove the need for a per file GlobalIndexOffset and
instead set the output index for each symbol directly.
This simplifies the code in several places.
Differential Revision: https://reviews.llvm.org/D40859
llvm-svn: 320001
It's pretty annoying to have LLD lowercase paths in error messages when
cross-compiling from a case-sensitive filesystem, since e.g. if I want
to examine the problematic object file, I have to perform some manual
case correction instead of just being able to copy the path from the
error message.
Differential Revision: https://reviews.llvm.org/D40931
llvm-svn: 319996
As mentioned in PR35471, shared functions for which
.plt entry address is used shows up in bfd's map files.
Patch teaches LLD to do the same.
Differential revision: https://reviews.llvm.org/D40839
llvm-svn: 319879
We fill executable sections with trap instructions (0xcc or equivalent).
If a .gnu.hash section was put into an executable segment, we created
corrupted .gnu.hash section. This patch fixes the issue.
llvm-svn: 319863
This line was mistakenly deleted in rL319813
Add a test for stackpointer relocations.
Differential Revision: https://reviews.llvm.org/D40847
llvm-svn: 319828
Add a new file AArch64ErrataFix.cpp that implements the logic to scan for
the Cortex-A53 Erratum 843419. This involves finding all the executable
code, disassembling the instructions that might trigger the erratum and
reporting a message if the sequence is detected.
At this stage we do not attempt to fix the erratum, this functionality
will be added in a later patch. See D36749 for proposal.
Differential Revision: https://reviews.llvm.org/D36742
llvm-svn: 319780
With fix:
Specify -soname for input dso to fix up the .dynstr section
size in different environments.
Original commit message:
As mentioned in PR35471, copied symbols did not show
in --Map output. Patch fixes that.
Differential revision: https://reviews.llvm.org/D40785
llvm-svn: 319769
When a linker script is used with a pattern like { *(.bss .bss.*) } the
InX::BssRelRo section will match against .bss.*. By matching on the name
only, in the same way that .data.rel.ro works we prevent this
from happening, but permit scripts that want to explicitly provide
a .bss.rel.ro OutputSection.
Differential Revision: https://reviews.llvm.org/D40735
llvm-svn: 319755
As mentioned in PR35471, copied symbols did not show
in --Map output. Patch fixes that.
Differential revision: https://reviews.llvm.org/D40785
llvm-svn: 319747
Previously, lld exited with an error status if the only option given to
the command was -v. GNU linkers gracefully exit in that case. This patch
makes lld behave like GNU.
Note that even with this patch, lld's -v and --version options behave
slightly differently than GNU linkers' counterparts. For example,
if you run `ld.bfd -v -v`, the version string is printed out twice.
But that is an edge case that I don't think we need to take care of.
Fixes https://bugs.llvm.org/show_bug.cgi?id=31582
Differential Revision: https://reviews.llvm.org/D40810
llvm-svn: 319717
As well as location counter expressions. The data generating expressions
such as BYTE can generate a non-zero sized OutputSection that will report
0 until assignAddresses() is called. Add an example to the existing test
case relro-non-contiguous-script-data.s.
Differential Revision: https://reviews.llvm.org/D40732
llvm-svn: 319648
PR35478 https://bugs.llvm.org/show_bug.cgi?id=35478 points out a flaw
in the implementation of r318924 from D40364. The implementation
depends on the Size field being set or the SyntheticSection::empty()
being accurate. These functions are not reliable as some linker script
commands that have yet to be processed may affect the results, causing
some non-zero size sections to be reported as zero size.
I think the first step is to revert r318924 and come up with a better
solution for the underlying problem rather than trying to layer more
heuristics onto the zero sized output section.
Chances are I'll be out of office by the time anyone sees this so feel
free to commit the revert if you agree with me.
Fixes PR35478
Current thoughts on the underlying problem:
Revisiting the motivation for adding the zero size check in the first
place; it was to prevent 0 sized SyntheticSections that a user does
not have full control over from needlessly breaking the PT_GNU_RELRO,
rather than trying to accommodate arbitrarily complex linker
scripts. Looking at the code, it looks like
removeUnusedSyntheticSections() should remove zero sized synthetic
sections. It does, but it doesn't set the Parent to nullptr, this has
the side effect that Sec == InX::BssRelRo->getParent() will make the
parent OutputSection of InX::BssRelRo RelRo even if there is no
InX::BssRelRo.
I tried a quick experiment with setting the Parent to nullptr and this
flushed out a few interesting test failures, it feels like playing
Jenga with every change:
In the isRelroSection() we have to consider the case where there
is no .plt and .plt.got but there is a ifunc plt with accompanying
(ifunc .got or .plt.got)
The PPC64 has PltHeaderSize == 0. Unfortunately HeaderSize == 0 is
used to choose between the ifunc plt or normal plt. We seem to get
away with this at the moment, but tests start to fail when Parent
is set to nullptr for the .got.plt.
The InX::BssRelRo and InX::Bss never get their sizes set and they
are always removed by removeUnusedSyntheticSections(), their
purpose seems to be as some kind of proxy for add .bss or
.bss.relro InputSections into their parent OutputSections, they
therefore don't behave like other SyntheticSections anyway.
My thinking is that some work is needed to make sure that the Sec ==
SyntheticSection->getParent() does a bit more checking before
returning true, particularly for InX::BssRelRo as that has special
behaviour. I'll hope to post something for review as soon as possible.
Patch by Peter Smith!
llvm-svn: 319563
This is for "Bug 35474 - --emit-relocs produces wrongly-named reloc sections".
LLD currently for scripts like:
.text.boot : { *(.text.boot) }
emits relocation section with name .rela.text because does not take
redefined name of output section into account and builds section name
using rules for non-scripted case. Patch fixes this oddness.
Differential revision: https://reviews.llvm.org/D40652
llvm-svn: 319526
We had no tests for what PROVIDE should do if there is a shared symbol
with the same name.
In both bfd and our existing implementation PROVIDE wins. Add a test
for that.
llvm-svn: 319486
The ELF spec says
Symbols with section index SHN_COMMON may appear only in relocatable
objects.
Currently lld can produce file that break that requirement.
llvm-svn: 319473
When a linker script has "foo = bar" and bar is the result of a copy
relocation foo should point to the same location in .bss.
This is part of a growing evidence that copy relocations should be
implemented by using replaceSymbol to replace the SharedSymbol with a
Defined.
llvm-svn: 319449
This change allows checking of function signatures but
does not yes enable it by default. In this mode, linking
two objects that were compiled with a different signatures
for the same function will produce a link error.
New options for enabling and disabling this feature have been
added: (--check-signatures/--no-check-signatures).
Differential Revision: https://reviews.llvm.org/D40371
llvm-svn: 319396
Adds support for "/ENTRY" and "/SUBSYSTEM" linker options in .drectve
sections. Some Mozilla binaries were using these directives and MSVC
link.exe appears to allow them. No attempt is made to reconcile these
with the options on the command line.
Patch by David Major!
Differential Revision: https://reviews.llvm.org/D39972
llvm-svn: 319356
The AArch64 unconditional branch and branch and link instructions have a
maximum range of 128 Mib. This is usually enough for most programs but
there are cases when it isn't enough. This change adds support for range
extension thunks to AArch64. For pc-relative thunks we follow the small
code model and use ADRP, ADD, BR. This has a limit of 4 gigabytes.
Differential Revision: https://reviews.llvm.org/D39744
llvm-svn: 319307
GNU ld has got an exception for such symbols, and mingw-w64
occasionally uses that exception to avoid exporting symbols in cases
where they otherwise aren't caught by the other exclusion mechanisms.
Differential Revision: https://reviews.llvm.org/D40553
llvm-svn: 319291
It had been reverted because it depended on r319008 which has been
recommitted.
Original message:
Add a missing test.
We were not testing that we correctly handled a .o with a weak symbol
after a .so.
llvm-svn: 319217
This includes a fix to mark copy reloc aliases as used.
Original message:
[ELF] Do not keep symbols if they referenced only from discarded sections.
This patch also ensures that in case of "--as-needed" is used,
DT_NEEDED entries are not created if they are required only by
these eliminated symbols.
llvm-svn: 319215
lld assumes some ARM features that are not available in all Arm
processors. In particular:
- The blx instruction present for interworking.
- The movt/movw instructions are used in Thunks.
- The J1=1 J2=1 encoding of branch immediates to improve Thumb wide
branch range are assumed to be present.
This patch reads the ARM Attributes section to check for the
architecture the object file was compiled with. If none of the objects
have an architecture that supports either of these features a warning
will be given. This is most likely to affect armv6 as used in the first
Raspberry Pi.
Differential Revision: https://reviews.llvm.org/D36823
llvm-svn: 319169
This allows grouping all sections like ".ctors.12345" into ".ctors".
For MinGW, the numerical values for such ctors are all zero-padded,
so a lexical sort is good enough.
Differential Revision: https://reviews.llvm.org/D40408
llvm-svn: 319151
If /debug was not specified, readSection will return a null
pointer for debug sections. If the debug section is associative with
another section, we need to make sure that the section returned from
readSection is not a null pointer before adding it as an associative
section.
Differential Revision: https://reviews.llvm.org/D40533
llvm-svn: 319133
Currently we mark every shared symbol as STB_WEAK.
That is a hack to make it easy to decide when a .so is needed or not
because of a reference to a given symbol.
That hack leaks when we create copy relocations as shown by the update
to relocation-copy-alias.s.
This patch stores the original binding when we first read a shared
symbol. We still have to update the binding to weak if we see a weak
undef, but I find the logic easier to read where it is now.
llvm-svn: 319127
With this change, instead of creating a SectionChunk for each section
in the object file, we only create them when we encounter a prevailing
comdat section.
Also change how symbol resolution occurs between comdat symbols. Now
only the comdat leader participates in comdat resolution, and not any
other external associated symbols. This is more in line with how COFF
semantics are defined, and should allow for a more straightforward
implementation of non-ANY comdat types.
On my machine, this change reduces our runtime linking a release
build of chrome_child.dll with /nopdb from 5.65s to 4.54s (median of
50 runs).
Differential Revision: https://reviews.llvm.org/D40238
llvm-svn: 319090
When an undefined weak reference has a PLT entry we must generate a range
extension thunk for any B or BL that can't reach the PLT entry.
This change explicitly looks for whether a PLT entry exists rather than
assuming that weak references never need PLT entries unless Config->Shared
is in operation. This covers the case where we are linking an executable
with dynamic linking, hence a PLT entry will be needed for undefined weak
references. This case comes up in real programs over 32 Mb in size as there
is a B to a weak reference __gmon__start__ in the Arm crti.o for glibc.
Differential Revision: https://reviews.llvm.org/D40248
llvm-svn: 319020
This patch also ensures that in case of "--as-needed" is used,
DT_NEEDED entries are not created if they are required only by
these eliminated symbols.
Differential Revision: https://reviews.llvm.org/D38790
llvm-svn: 319008
LLD uses .bss.rel.ro for read-only copy relocations whereas the ld.bfd and
gold linkers use .data.rel.ro. In some linker scripts including ld.bfd's
internal linker script, the relro sections are placed sequentially assuming
.data.rel.ro is used. LLD's use of .bss.rel.ro means that the copy
relocations get matched into the .bss section causing the relro sections to
be non-contiguous.
This change checks for a .data.rel.ro OutputSection when a linker script
with the SECTIONS command is used. The section will match in the
.data.rel.ro output section and will maintain contiguous relro.
Differential Revision: https://reviews.llvm.org/D40365
Fixes PR35265
llvm-svn: 318940
It now has a DT_NEEDED that could be removed by --gc-sections and one
that cannot. Without this all tests would pass if --gc-sections just
removed all DT_NEEDED.
llvm-svn: 318937
When checking for contiguous relro sections we can skip over empty sections.
If there is an empty non-relro section in the middle of a contiguous block
of relro sections then it cannot be written to so it is safe to include in
PT_GNU_RELRO header. If there is a contiguous block of empty relro sections
then no PT_GNU_RELRO header is required for them.
Differential Revision: https://reviews.llvm.org/D40364
llvm-svn: 318924
If a linker script is used that names linker generated synthetic sections
it is possible that the OutputSections for which isRelroSection() is true
are not contiguous. When the relro sections are not contiguous we cannot
describe them with a single PT_GNU_RELRO PHDR. Unfortunately at least one
contemporary dynamic loader only supports one PT_GNU_RELRO PHDR so we
cannot output more than one of these PHDRs. As not including relro
sections in the PHDR will lead to security sensitive sections being
writeable we choose to give an error message instead.
Differential Revision: https://reviews.llvm.org/D40359
[ELF] Skip over empty sections when checking for contiguous relro
llvm-svn: 318920
The default limit is 1000000 but it can be configured with a cache
policy. The motivation is that some filesystems (notably ext4) have
a limit on the number of files that can be contained in a directory
(separate from the inode limit).
Differential Revision: https://reviews.llvm.org/D40327
llvm-svn: 318857
The MIPS GOT section has a number of local entries based on the number of pages
needed for output sections referenced by GOT page relocations. The number is
recorded in the DT_MIPS_LOCAL_GOTNO dynamic section tag. However, the dynamic tag
is added before assignAddresses has been called, meaning that any section size used
to calculate the value will not include size modifications caused by, for example,
linker scripts and thunks.
This change moves the calculation of DT_MIPS_LOCAL_GOTNO until writeTo, by which
time the output section sizes have been finalized.
Reviewers: ruiu, rafael
Differential Revision: https://reviews.llvm.org/D39493
llvm-svn: 318828
This effectively reverts r318548 and r318635 while keeping the
functionality behind the flag and preserving the bug fix from r318548.
Differential Revision: https://reviews.llvm.org/D40264
llvm-svn: 318721
Summary: MSVC does this. The user can override it with their own /merge: flag.
Reviewers: ruiu, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40197
llvm-svn: 318699
Don't crash if we encounter a reference to an early discarded section
(such as .drectve). Instead, handle them the same way as sections
discarded by comdat merging, i.e. either print an error message or
(for debug sections) silently ignore the relocation.
Differential Revision: https://reviews.llvm.org/D40235
llvm-svn: 318689
This requirement was added in r254578 to fix pr25686. However, it
appears to have originated from a misdiagnosis of the problem: link.exe
refused to merge the two sections because they are non-executable,
not because they have internal leaders. If I set up a similar scenario
with functions instead of globals I see that link.exe merges them.
Differential Revision: https://reviews.llvm.org/D40236
llvm-svn: 318682
Summary:
I noticed that the reproducers files I was getting from building CheriBSD
didn't work because the --sysroot option was not being rewritten. I've
updated the test to also verify that the rewritten path matches uses a
FileCheck capature instead of a {{.+}} regex
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: llvm-commits, emaste
Differential Revision: https://reviews.llvm.org/D40125
llvm-svn: 318656
Summary:
This matches the behaviour of ld.bfd:
https://sourceware.org/binutils/docs/ld/Options.html#Options
If scriptfile does not exist in the current directory, ld looks for it in
the directories specified by any preceding '-L' options. Multiple '-T'
options accumulate.
Reviewers: ruiu, grimar
Reviewed By: ruiu, grimar
Subscribers: emaste, llvm-commits
Differential Revision: https://reviews.llvm.org/D40129
llvm-svn: 318655
Summary:
The bug triggers when the following conditions are met:
- A thunk is created in a given input section S
- A linker script is specified
- There is at least one matcher in the linker script .text section output
that does not match any of the sections in the input files, before the matcher
that matches section S.
The issue was found when linking the FreeBSD kernel for MIPS when built
with -fPIC. Patch by Alfredo Mazzinghi.
Reviewers: ruiu, psmith, atanasyan
Reviewed By: ruiu
Subscribers: peter.smith, emaste, sdardis, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D40174
llvm-svn: 318653
The comdat sections in these test cases do not comply with the COFF
specification, and link.exe rejects them. I plan to make a change to
how we handle comdat sections which would also cause us to reject them.
llvm-svn: 318637
Now that our support for PDB emission is reasonably good, there is
no longer a need to emit a COFF symbol table.
Also fix a bug where we would fail to emit a string table for long
section names if /debug was not specified.
Differential Revision: https://reviews.llvm.org/D40189
llvm-svn: 318548
Summary:
Many small functions have identical unwind info because they push the
same sets of CSRs in the same order and have the same stack and prologue
size. The VC linker merges duplicate .xdata, and so should LLD.
This reduces the .xdata section size of clang.exe from 1.8MB to 94KB.
Reviewers: pcc, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40160
llvm-svn: 318547
This linker backend is still a work in progress but is
enough to link simple programs including linking against
library archives.
Differential Revision: https://reviews.llvm.org/D34851
llvm-svn: 318539
Recently we teached LLD to report line numbers for duplicate variables
definitions, though currently LLD is unable to do that for case when
strings are not built in .debug_info, but stored in .debug_str instead.
That is because out LLDDwarfObj does not handle .debug_str yet.
Patch fixes that.
Differential revision: https://reviews.llvm.org/D39542
llvm-svn: 318519
This fixes PR35223.
Here I enabled SHF_MERGE section content merging for -r like
we do for regular linking.
Differential revision: https://reviews.llvm.org/D40026
llvm-svn: 318516
Commit r318397 fixed the cache pruning interval which broke this test
as it was assuming that the cache pruning was always being
performed. Explicitly set prune interval to 0s to ensure this.
llvm-svn: 318426
Previously our relocations we rewrote were broken for that case.
We emited incorrect addend and broken relocation info field
because did not produce section symbol for mergeable synthetic sections.
Differential revision: https://reviews.llvm.org/D40070
llvm-svn: 318394
Sections that will be mapped at runtime will only have the short
section name available, since the string table it points into isn't
mapped. Therefore prefer truncating those names over writing a
long name that is unavailable at runtime.
This allows libunwind to find the .eh_frame section at runtime even
if the module was built with debug info enabled.
Differential Revision: https://reviews.llvm.org/D40025
llvm-svn: 318391
If -opt:noref is specified, they can end up with isLive() == 1
when the autoexport check is run.
To reduce the risk of potential issues, only consider exporting
DefinedRegular and DefinedCommon, nothing else.
Differential Revision: https://reviews.llvm.org/D40014
llvm-svn: 318384
Summary:
We previously assumed that all SafeSEH handlers are
DefinedRegular symbols. This is not the case for handlers defined in
DLLs. As a result, we were failing to emit entries in the SafeSEH
table for those handlers. This change fixes that.
Fixes PR35324.
Reviewers: rnk, ruiu
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40102
llvm-svn: 318364
An output section can include elements from two input sections with
different sh_entsize. When that happens the output section itself
should not have a sh_entsize.
llvm-svn: 318311
No difference in practice other than having sh_entsize in the output.
This should simplify the patch for handling SHF_MERGE in -r.
Based on a patch by George Rimar.
llvm-svn: 318306
Even if we don't actually write any string table contents, the
4 byte size for the string table will always be written. Make
sure we accommodate for this in the file size. Since this size
is aligned up, this would seldom be an issue in practice.
Differential Revision: https://reviews.llvm.org/D39891
llvm-svn: 318284
GNU ld doesn't seem to support --icf at all, but this was suggested
in D39885, and GNU gold seems to support it.
Differential Revision: https://reviews.llvm.org/D40019
llvm-svn: 318283
All of these are disabled by default in GNU ld, but enabled by default
in lld.
Disable dynamicbase by default since it potentially could cause
compatibility issues, but just ignore the others since the lld
default should be fine for most concievable cases.
Differential Revision: https://reviews.llvm.org/D40017
llvm-svn: 318281
In GNU ld, this option is only available on i386, not on x86_64
(where it's enabled by default with no option to disable it either).
Differential Revision: https://reviews.llvm.org/D40015
llvm-svn: 318280
microMIPS symbols including microMIPS PLT records created for regular
symbols needs to be marked by STO_MIPS_MICROMIPS flag in a symbol table.
Additionally microMIPS entries in a dynamic symbol table should have
configured less-significant bit. That allows to escape teaching a
dynamic linker about microMIPS symbols.
llvm-svn: 318097
ICF and GC impair debugging, so MSVC disables these optimizations when
/debug is passed. They are still on by default when no PDB is produced.
This change also makes /opt:ref enable ICF, which is consistent with
MSVC: https://msdn.microsoft.com/en-us/library/bxwfs976.aspx
We should consider making /opt:icf fold readonly data in the near
future. LLD used to do this, but we disabled it because it breaks too
many programs. MSVC only does this if the user explicitly passes
/opt:icf.
Reviewers: ruiu, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39885
llvm-svn: 318071
I never ran into this until lld-link started enabling debug output
by default for the mingw mode. I haven't been able to verify that
this actually behaves correctly, but this relocation is handled
identically on all other architectures so far.
Differential Revision: https://reviews.llvm.org/D39754
llvm-svn: 317669
Summary:
__safe_se_handler_base should be either absolute 0 (when no SafeSEH
table is present), or relative to the image base (when the table is
present). An earlier change inadvertedly made the symbol absolute in
both cases, leading to the SafeSEH table not being locatble at run
time. This change fixes that and updates the safeseh test to check for
the presence of the relocation.
Reviewers: rnk, ruiu
Reviewed By: ruiu
Subscribers: ruiu, llvm-commits
Differential Revision: https://reviews.llvm.org/D39765
llvm-svn: 317635
After ObjectYAML learnt the proper enum names for ARMNT/ARM64
relocations, it no longer accepts the numerical values.
This fixes LLD tests after SVN r317459 in LLVM.
llvm-svn: 317460
Common symbols are now represented with a DefinedRegular that points
to a BssSection, even during symbol resolution.
Differential Revision: https://reviews.llvm.org/D39666
llvm-svn: 317447
Currently LLD tries to use information about functions and variables location
taking it from debug sections. When --strip-* is given we discard such sections
and that breaks error reporting.
Patch stops discarding such sections and just removes them from InputSections list.
Differential revision: https://reviews.llvm.org/D39550
llvm-svn: 317405
When findMemoryRegion do search to find a region for output section it
iterates over MemoryRegions which is DenseMap and so does not
guarantee iteration in insertion order. As a result selected region depends
on its name and not on its definition position
Testcase shows the issue, patch fixes it. Behavior after applying the patch
seems consistent with bfd.
Differential revision: https://reviews.llvm.org/D39544
llvm-svn: 317307
Currently we do not strip .zdebug_*, what looks wrong.
Also this simplifies the testcase we have for this options.
Differential revision: https://reviews.llvm.org/D39552
llvm-svn: 317306
Recently we teached LLD to report line numbers for duplicate variables
definitions, though currently LLD is unable to do that for case when
strings are not built in .debug_info, but stored in .debug_str instead.
That is because out LLDDwarfObj does not handle .debug_str yet.
Patch fixes that.
Differential revision: https://reviews.llvm.org/D39542
llvm-svn: 317305
This is PR34826.
Currently LLD is unable to report line number when reporting
duplicate declaration of some variable.
That happens because for extracting line information we always use
.debug_line section content which describes mapping from machine
instructions to source file locations, what does not help for
variables as does not describe them.
In this patch I am taking the approproate information about
variables locations from the .debug_info section.
Differential revision: https://reviews.llvm.org/D38721
llvm-svn: 317080
Summary:
**Problem**
`--exclude-libs` does not work for static libraries affected by the `--whole-archive` option.
**Description**
`--exclude-libs` creates a list of static library paths and does library lookups in this list.
`--whole-archive` splits the static libraries that follow it into separate objects. As a result, lld no longer sees static libraries among linked files and does no `--exclude-libs` lookups.
**Solution**
The proposed solution is to make `--exclude-libs` consider object files too. When lld finds an object file it checks whether this file originates from an archive and, if so, looks the archive up in the `--exclude-libs` list.
Reviewers: ruiu, rafael
Reviewed By: ruiu
Subscribers: asl, ikudrin, llvm-commits, emaste
Tags: #lld
Differential Revision: https://reviews.llvm.org/D39353
llvm-svn: 316998
Rui Ueyama