// trunc (binop X, C) --> binop (trunc X, C')
// trunc (binop (ext X), Y) --> binop X, (trunc Y)
I'm grouping sub with the other binops because that makes the code simpler
and the transforms are valid:
https://rise4fun.com/Alive/UeF
...so even though we don't expect a sub with constant Op1 or any of the
other opcodes with constant Op0 due to canonicalization rules, we might as
well handle those situations if non-canonical code somehow reaches this
point (it should just make instcombine more efficient in reaching its
end goal).
This should solve the problem that later manifests in the vectorizers in
PR35295:
https://bugs.llvm.org/show_bug.cgi?id=35295
llvm-svn: 318404
Initial changes to support debugging PE/COFF files with LLDB on Windows through DIA SDK.
There is another set of changes required on the LLDB side before this does anything.
Differential Revision: https://reviews.llvm.org/D39517
llvm-svn: 318403
The mulsc3_test.c was marked as unsupported due to PR32457, the underlying
cause of this PR was fixed in PR28164 so we can remove the unsupported as
it is no longer needed.
Differential Revision: https://reviews.llvm.org/D40076
llvm-svn: 318396
Fix a couple places where the minimum alignment/size should be a
function of the shadow granularity:
- alignment of AllGlobals
- the minimum left redzone size on the stack
Added a test to verify that the metadata_array is properly aligned
for shadow scale of 5, to be enabled when we add build support
for testing shadow scale of 5.
Differential Revision: https://reviews.llvm.org/D39470
llvm-svn: 318395
Previously our relocations we rewrote were broken for that case.
We emited incorrect addend and broken relocation info field
because did not produce section symbol for mergeable synthetic sections.
Differential revision: https://reviews.llvm.org/D40070
llvm-svn: 318394
SelectionDAGBuilder::visitAlloca assumes alloca address space is 0, which is
incorrect for triple amdgcn---amdgiz and causes isel failure.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D40095
llvm-svn: 318392
Sections that will be mapped at runtime will only have the short
section name available, since the string table it points into isn't
mapped. Therefore prefer truncating those names over writing a
long name that is unavailable at runtime.
This allows libunwind to find the .eh_frame section at runtime even
if the module was built with debug info enabled.
Differential Revision: https://reviews.llvm.org/D40025
llvm-svn: 318391
Change the calculation for the desired ValueType for non-sign
extending loads, as in those cases we don't care about the
higher bits. This creates a smaller ExtVT and allows for such
combinations as:
(srl (zextload i16, [addr]), 8) -> (zextload i8, [addr + 1])
Differential Revision: https://reviews.llvm.org/D40034
llvm-svn: 318390
The LatencyPriorityQueue doesn't currently check whether the SU being removed really exists in the Queue.
This method fails quietly when SU is not found and removes the last element from the Queue, leading to unexpected behavior.
Unfortunately, this only occurs on our custom target, with the custom scheduler. In our case, when remove() is invoked, it removes the wrong SU at the end of the Queue, which is only discovered later when VerifyScheduledDAG() is invoked and finds that some nodes were not scheduled at all.
As this is only reproducible with a lot of proprietary code, I'm hopeful this assert is straightforward enough to not necessitate a test.
Patch by Ondrej Glasnak!
Differential Revision: https://reviews.llvm.org/D40084
llvm-svn: 318387
This patch contains more accurate cost of interelaved load\store of stride 2 for the types int64\double on AVX2.
Reviewers: delena, RKSimon, craig.topper, dorit
Reviewed By: dorit
Differential Revision: https://reviews.llvm.org/D40008
llvm-svn: 318385
If -opt:noref is specified, they can end up with isLive() == 1
when the autoexport check is run.
To reduce the risk of potential issues, only consider exporting
DefinedRegular and DefinedCommon, nothing else.
Differential Revision: https://reviews.llvm.org/D40014
llvm-svn: 318384
This didn't require any further changes to libunwind as long as win64
in general is handled correctly.
Differential Revision: https://reviews.llvm.org/D39632
llvm-svn: 318383
Summary:
Use use_nodbg_empty() rather than use_empty() in
MachineRegisterInfo::EmitLiveInCopies() when determining if a livein
register has any uses or not. Otherwise a single dbg.value can make us
generate different code, meaning -g would affect code generation.
Found when compiling code for my out-of-tree target. Unfortunately I
haven't been able to reproduce the problem on X86 or any of the other
in-tree targets that I tried, so no test case.
Reviewers: MatzeB
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39044
llvm-svn: 318382
When expanding exit conditions for pre- and postloops, we may end up expanding a
recurrency from the loop to in its loop's preheader. This produces incorrect IR.
This patch ensures that IRCE uses SCEVExpander correctly and only expands code which
is safe to expand in this particular location.
Differentian Revision: https://reviews.llvm.org/D39234
llvm-svn: 318381
The type legalizer will try to scalarize these operations if it sees them, but there is no handling for scalarizing them. This leads to a fatal error. With this change they will now be scalarized by the mem intrinsic scalarizing pass before SelectionDAG.
llvm-svn: 318380
For example, this is currently reachable by X86 if you use a masked store intrinsic with a v1iX type.
Using a fatal error seems like a better user experience if someone were to encounter this on a release build. There are several other similar places that have been converted from unreachable to fatal error previously.
llvm-svn: 318379
This function checks that:
1) It is safe to expand a SCEV;
2) It is OK to materialize it at the specified location.
For example, attempt to expand a loop's AddRec to the same loop's preheader should fail.
Differential Revision: https://reviews.llvm.org/D39236
llvm-svn: 318377
processDbgDeclares assumes pointer size is the same for different addr spaces.
It uses pointer size for addr space 0 for all pointers, which causes assertion
in stripAndAccumulateInBoundsConstantOffsets for amdgcn---amdgiz since
pointer in addr space 5 has different size than in addr space 0.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D40085
llvm-svn: 318370
Summary:
This is a small check to avoid throwing objc exceptions.
In specific it will detect the usage of @throw statement and throw warning.
Reviewers: hokein, benhamilton
Reviewed By: hokein, benhamilton
Subscribers: cfe-commits, mgorny
Differential Revision: https://reviews.llvm.org/D40058
llvm-svn: 318366
Summary:
We previously assumed that all SafeSEH handlers are
DefinedRegular symbols. This is not the case for handlers defined in
DLLs. As a result, we were failing to emit entries in the SafeSEH
table for those handlers. This change fixes that.
Fixes PR35324.
Reviewers: rnk, ruiu
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40102
llvm-svn: 318364
Add hook in BPF backend so that llvm-objdump can print out
the jmp target with label names, e.g.,
...
if r1 != 2 goto 6 <LBB0_2>
...
goto 7 <LBB0_4>
...
LBB0_2:
...
LBB0_4:
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 318358
so it has the same padding as the kernel's definition
which is written in terms of uint128_t. Original patch
by Ryan Mansfield.
<rdar://problem/35468499>
llvm-svn: 318357
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Due to integer precision, we might have numerator greater than denominator in
the branch probability scaling. Add a check to prevent this from happening.
llvm-svn: 318353
Summary:
Make it possible to feed runtime information back to tablegen to enable
profile-guided tablegen-eration, detection of untested tablegen definitions, etc.
Being a cross-compiler by nature, LLVM will potentially collect data for multiple
architectures (e.g. when running 'ninja check'). We therefore need a way for
TableGen to figure out what data applies to the backend it is generating at the
time. This patch achieves that by including the name of the 'def X : Target ...'
for the backend in the TargetRegistry.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, arsenm, jyknight, aditya_nandakumar, sdardis, nemanjai, ab, nhaehnle, t.p.northover, javed.absar, qcolombet, llvm-commits, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D39742
llvm-svn: 318352
John Brawn