This reapplies c0f6ad7d1f with an
additional fix in test/DebugInfo/X86/constant-loclist.ll, which had a
slightly different output on windows targets. The test now accounts for
this difference.
The original commit message follows.
Summary:
As discussed in D70081, this adds the ability to dump section
names/indices to the location list dumper. It does this by moving the
range specific logic from DWARFDie.cpp:dumpRanges into the
DWARFAddressRange class.
The trickiest part of this patch is the backflip in the meanings of the
two dump flags for the location list sections.
The dumping of "raw" location list data is now controlled by
"DisplayRawContents" flag. This frees up the "Verbose" flag to be used
to control whether we print the section index. Additionally, the
DisplayRawContents flag is set for section-based dumps whenever the
--verbose option is passed, but this is not done for the "inline" dumps.
Also note that the index dumping currently does not work for the DWARF
v5 location lists, as the parser does not fill out the appropriate
fields. This will be done in a separate patch.
Reviewers: dblaikie, probinson, JDevlieghere, SouraVX
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, arphaman, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70227
Summary:
As discussed in D70081, this adds the ability to dump section
names/indices to the location list dumper. It does this by moving the
range specific logic from DWARFDie.cpp:dumpRanges into the
DWARFAddressRange class.
The trickiest part of this patch is the backflip in the meanings of the
two dump flags for the location list sections.
The dumping of "raw" location list data is now controlled by
"DisplayRawContents" flag. This frees up the "Verbose" flag to be used
to control whether we print the section index. Additionally, the
DisplayRawContents flag is set for section-based dumps whenever the
--verbose option is passed, but this is not done for the "inline" dumps.
Also note that the index dumping currently does not work for the DWARF
v5 location lists, as the parser does not fill out the appropriate
fields. This will be done in a separate patch.
Reviewers: dblaikie, probinson, JDevlieghere, SouraVX
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, arphaman, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70227
When a landing pad is calculated in a program that is compiled for micromips
with -fPIC flag, it will point to an even address.
Such an error will cause a segmentation fault, as the instructions in
micromips are aligned on odd addresses. This patch sets the last bit of the
offset where a landing pad is, to 1, which will effectively be an odd
address and point to the instruction exactly.
r344591 fixed this issue for -static compilation.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D57677
llvm-svn: 353480
This reapplies commit r351987 with a failed test fix. Now the test
accepts both DW_OP_GNU_push_tls_address and DW_OP_form_tls_address
opcode.
Original commit message:
```
This is a fix for a regression introduced by the rL348194 commit. In
that change new type (MEK_DTPREL) of MipsMCExpr expression was added,
but in some places of the code this type of expression considered as
unexpected.
This change fixes the bug. The MEK_DTPREL type of expression is used for
marking TLS DIEExpr only and contains a regular sub-expression. Where we
need to handle the expression, we retrieve the sub-expression and
handle it in a common way.
```
llvm-svn: 352034
This is a fix for a regression introduced by the rL348194 commit. In
that change new type (MEK_DTPREL) of MipsMCExpr expression was added,
but in some places of the code this type of expression considered as
unexpected.
This change fixes the bug. The MEK_DTPREL type of expression is used for
marking TLS DIEExpr only and contains a regular sub-expression. Where we
need to handle the expression, we retrieve the sub-expression and
handle it in a common way.
llvm-svn: 351987
Part of the effort to refactoring frame pointer code generation. We used
to use two function attributes "no-frame-pointer-elim" and
"no-frame-pointer-elim-non-leaf" to represent three kinds of frame
pointer usage: (all) frames use frame pointer, (non-leaf) frames use
frame pointer, (none) frame use frame pointer. This CL makes the idea
explicit by using only one enum function attribute "frame-pointer"
Option "-frame-pointer=" replaces "-disable-fp-elim" for tools such as
llc.
"no-frame-pointer-elim" and "no-frame-pointer-elim-non-leaf" are still
supported for easy migration to "frame-pointer".
tests are mostly updated with
// replace command line args ‘-disable-fp-elim=false’ with ‘-frame-pointer=none’
grep -iIrnl '\-disable-fp-elim=false' * | xargs sed -i '' -e "s/-disable-fp-elim=false/-frame-pointer=none/g"
// replace command line args ‘-disable-fp-elim’ with ‘-frame-pointer=all’
grep -iIrnl '\-disable-fp-elim' * | xargs sed -i '' -e "s/-disable-fp-elim/-frame-pointer=all/g"
Patch by Yuanfang Chen (tabloid.adroit)!
Differential Revision: https://reviews.llvm.org/D56351
llvm-svn: 351049
When compiling static executable for micromips, CFI symbols
are incorrectly labeled as MICROMIPS, which cause
".eh_frame_hdr refers to overlapping FDEs." error.
This patch does not label CFI symbols as MICROMIPS, and FDEs do not
overlap anymore. This patch also exposes another bug, which is fixed
here: https://reviews.llvm.org/D52985
Differential Revision: https://reviews.llvm.org/D52987
llvm-svn: 344516
When compiling static executable for micromips, CFI symbols
are incorrectly labeled as MICROMIPS, which cause
".eh_frame_hdr refers to overlapping FDEs." error.
This patch does not label CFI symbols as MICROMIPS, and FDEs do not
overlap anymore. This patch also exposes another bug, which is fixed
here: https://reviews.llvm.org/D52985
Differential Revision: https://reviews.llvm.org/D52987
llvm-svn: 344511
It originally triggered a stepping problem in the debugger, which could
be fixed by adjusting CodeGen/LexicalScopes.cpp however it seems we prefer
the previous behavior anyway.
See the discussion for details: http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181008/593833.html
This reverts commit r343880.
This reverts commit r343874.
llvm-svn: 344318
Context: Compiler generated instructions do not have a debug location
assigned to them. However emitting 0-line records for all of them bloats
the line tables for very little benefit so we usually avoid doing that.
Not emitting anything will lead to the previous debug location getting
applied to the locationless instructions. This is not desirable for
block begin and after labels. Previously we would emit simply emit
line-0 records in this case, this patch changes the behavior to do a
forward search for a debug location in these cases before emitting a
line-0 record to further reduce line table bloat.
Inspired by the discussion in https://reviews.llvm.org/D52862
llvm-svn: 343874
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
llvm-svn: 338069
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
This is causing compilation timeouts on code with long sequences of
local values and calls (i.e. foo(1); foo(2); foo(3); ...). It turns out
that code coverage instrumentation is a great way to create sequences
like this, which how our users ran into the issue in practice.
Intel has a tool that detects these kinds of non-linear compile time
issues, and Andy Kaylor reported it as PR37010.
The current sinking code scans the whole basic block once per local
value sink, which happens before emitting each call. In theory, local
values should only be introduced to be used by instructions between the
current flush point and the last flush point, so we should only need to
scan those instructions.
llvm-svn: 329822
Summary:
Local values are constants, global addresses, and stack addresses that
can't be folded into the instruction that uses them. For example, when
storing the address of a global variable into memory, we need to
materialize that address into a register.
FastISel doesn't want to materialize any given local value more than
once, so it generates all local value materialization code at
EmitStartPt, which always dominates the current insertion point. This
allows it to maintain a map of local value registers, and it knows that
the local value area will always dominate the current insertion point.
The downside is that local value instructions are always emitted without
a source location. This is done to prevent jumpy line tables, but it
means that the local value area will be considered part of the previous
statement. Consider this C code:
call1(); // line 1
++global; // line 2
++global; // line 3
call2(&global, &local); // line 4
Today we end up with assembly and line tables like this:
.loc 1 1
callq call1
leaq global(%rip), %rdi
leaq local(%rsp), %rsi
.loc 1 2
addq $1, global(%rip)
.loc 1 3
addq $1, global(%rip)
.loc 1 4
callq call2
The LEA instructions in the local value area have no source location and
are treated as being on line 1. Stepping through the code in a debugger
and correlating it with the assembly won't make much sense, because
these materializations are only required for line 4.
This is actually problematic for the VS debugger "set next statement"
feature, which effectively assumes that there are no registers live
across statement boundaries. By sinking the local value code into the
statement and fixing up the source location, we can make that feature
work. This was filed as https://bugs.llvm.org/show_bug.cgi?id=35975 and
https://crbug.com/793819.
This change is obviously not enough to make this feature work reliably
in all cases, but I felt that it was worth doing anyway because it
usually generates smaller, more comprehensible -O0 code. I measured a
0.12% regression in code generation time with LLC on the sqlite3
amalgamation, so I think this is worth doing.
There are some special cases worth calling out in the commit message:
1. local values materialized for phis
2. local values used by no-op casts
3. dead local value code
Local values can be materialized for phis, and this does not show up as
a vreg use in MachineRegisterInfo. In this case, if there are no other
uses, this patch sinks the value to the first terminator, EH label, or
the end of the BB if nothing else exists.
Local values may also be used by no-op casts, which adds the register to
the RegFixups table. Without reversing the RegFixups map direction, we
don't have enough information to sink these instructions.
Lastly, if the local value register has no other uses, we can delete it.
This comes up when fastisel tries two instruction selection approaches
and the first materializes the value but fails and the second succeeds
without using the local value.
Reviewers: aprantl, dblaikie, qcolombet, MatzeB, vsk, echristo
Subscribers: dotdash, chandlerc, hans, sdardis, amccarth, javed.absar, zturner, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D43093
llvm-svn: 327581
This patch adds dumping of line table instructions as well as the final
state at each specified pc value in verbose mode. This is essentially
the same as the default in Darwin's dwarfdump. Dumping the actual line
table opcodes can be particularly useful for something like debugging a
bad `.debug_line` section.
Differential revision: https://reviews.llvm.org/D37971
llvm-svn: 313910
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
llvm-svn: 312970
This change simplifies code that has to deal with
DIGlobalVariableExpression and mirrors how we treat DIExpressions in
debug info intrinsics. Before this change there were two ways of
representing empty expressions on globals, a nullptr and an empty
!DIExpression().
If someone needs to upgrade out-of-tree testcases:
perl -pi -e 's/(!DIGlobalVariableExpression\(var: ![0-9]*)\)/\1, expr: !DIExpression())/g' <MYTEST.ll>
will catch 95%.
llvm-svn: 312144
Summary:
Based on Fred's patch here: https://reviews.llvm.org/D6771
I can't seem to commandeer the old review, so I'm creating a new one.
With that change the locations exrpessions are pretty printed inline in the
DIE tree. The output looks like this for debug_loc entries:
DW_AT_location [DW_FORM_data4] (0x00000000
0x0000000000000001 - 0x000000000000000b: DW_OP_consts +3
0x000000000000000b - 0x0000000000000012: DW_OP_consts +7
0x0000000000000012 - 0x000000000000001b: DW_OP_reg0 RAX, DW_OP_piece 0x4
0x000000000000001b - 0x0000000000000024: DW_OP_breg5 RDI+0)
And like this for debug_loc.dwo entries:
DW_AT_location [DW_FORM_sec_offset] (0x00000000
Addr idx 2 (w/ length 190): DW_OP_consts +0, DW_OP_stack_value
Addr idx 3 (w/ length 23): DW_OP_reg0 RAX, DW_OP_piece 0x4)
Simple locations without ranges are printed inline:
DW_AT_location [DW_FORM_block1] (DW_OP_reg4 RSI, DW_OP_piece 0x4, DW_OP_bit_piece 0x20 0x0)
The debug_loc(.dwo) dumping in changed accordingly to factor the code.
Reviewers: dblaikie, aprantl, friss
Subscribers: mgorny, javed.absar, hiraditya, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D37123
llvm-svn: 312042
Debug information for TLS variables on MIPS might have R_MIPS_TLS_DTPREL32
or R_MIPS_TLS_DTPREL64 relocations. This patch adds a support for such
relocations in the `RelocVisitor`.
llvm-svn: 311031
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
llvm-svn: 309426
All MIPS .debug_* sections should be marked with ELF type SHT_MIPS_DWARF
accordingly the specification [1]. Also the same section type is assigned
to these sections by GNU tools.
[1] ftp.software.ibm.com/software/os390/czos/dwarf/mips_extensions.pdf
Differential Revision: https://reviews.llvm.org/D29789
llvm-svn: 297447
On ELF every section can have a corresponding section symbol. When in
an assembly file we have
.quad .text
the '.text' refers to that symbol.
The way we used to handle them is to leave .text an undefined symbol
until the very end when the object writer would map them to the
actual section symbol.
The problem with that is that anything before the end would see an
undefined symbol. This could result in bad diagnostics
(test/MC/AArch64/label-arithmetic-diags-elf.s), or incorrect results
when using the asm streamer (est/MC/Mips/expansion-jal-sym-pic.s).
Fixing this will also allow using the section symbol earlier for
setting sh_link of SHF_METADATA sections.
This patch includes a few hacks to avoid changing our behaviour when
handling conflicts between section symbols and other symbols. I
reported pr31850 to track that.
llvm-svn: 293936
This patch fixes debug information for __thread variable on Mips
using .dtprelword and .dtpreldword directives.
Patch by Aleksandar Beserminji.
Differential Revision: http://reviews.llvm.org/D28770
llvm-svn: 292624
This patch renumbers the metadata nodes in debug info testcases after
https://reviews.llvm.org/D26769. This is a separate patch because it
causes so much churn. This was implemented with a python script that
pipes the testcases through llvm-as - | llvm-dis - and then goes
through the original and new output side-by side to insert all
comments at a close-enough location.
Differential Revision: https://reviews.llvm.org/D27765
llvm-svn: 290292
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades and a change
to the Bitcode record for DIGlobalVariable, that makes upgrading the
old format unambiguous also for variables without DIExpressions.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 290153
This reverts commit 289920 (again).
I forgot to implement a Bitcode upgrade for the case where a DIGlobalVariable
has not DIExpression. Unfortunately it is not possible to safely upgrade
these variables without adding a flag to the bitcode record indicating which
version they are.
My plan of record is to roll the planned follow-up patch that adds a
unit: field to DIGlobalVariable into this patch before recomitting.
This way we only need one Bitcode upgrade for both changes (with a
version flag in the bitcode record to safely distinguish the record
formats).
Sorry for the churn!
llvm-svn: 289982
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 289920
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 289902
Summary:
Instead of instantiating the MipsFastISel class and checking if the
target is supported in the overriden methods, we should perform that
check before creating the class. This allows us to enable FastISel *only*
for targets that truly support it, ie. MIPS32 to MIPS32R5.
Reviewers: sdardis
Subscribers: ehostunreach, llvm-commits
Differential Revision: https://reviews.llvm.org/D24824
llvm-svn: 284475
This patch reverses the edge from DIGlobalVariable to GlobalVariable.
This will allow us to more easily preserve debug info metadata when
manipulating global variables.
Fixes PR30362. A program for upgrading test cases is attached to that
bug.
Differential Revision: http://reviews.llvm.org/D20147
llvm-svn: 281284
This scheduler describes a processor which covers all MIPS ISAs based
around the interAptiv and P5600 timings.
Reviewers: vkalintiris, dsanders
Differential Revision: https://reviews.llvm.org/D23551
llvm-svn: 280374
As requested by Rafael Espindola in his post-commit comments on r268036. This
makes the previous behaviour the default while still allowing verification of
IAS.
llvm-svn: 268496
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
This change follows up defaults for GCC and Clang, so LLVM does not differ
from them. While number of the test files are touched with this change, they
all keep the old (expected) behaviour with the explicit option:
"-relocation-model=pic"
The tests that have not been touched are insensitive to relocation model.
Differential Revision: http://reviews.llvm.org/D17995
llvm-svn: 265949
This mostly cosmetic patch moves the DebugEmissionKind enum from DIBuilder
into DICompileUnit. DIBuilder is not the right place for this enum to live
in — a metadata consumer should not have to include DIBuilder.h.
I also added a Verifier check that checks that the emission kind of a
DICompileUnit is actually legal.
http://reviews.llvm.org/D18612
<rdar://problem/25427165>
llvm-svn: 265077
Pavel Labath