GCC don't use the is_prologue_end flag to mark the first instruction
after the prologue. Instead of it it is issuing a line table entry for
the first instruction of the prologue and one for the first instruction
after the prologue. If the size of the prologue is 0 instruction then
the 2 line entry will have the same file address.
We remove these duplicates entries as they are violating the dwarf spec
and can cause confusion in the debugger. To prevent the lost of
information about the end of prologue we should set the prologue end
flag for the line entries what are representing more then 1 entry.
Differential revision: http://reviews.llvm.org/D12757
llvm-svn: 247788
Summary: SymbolFileDWARF now creates VarDecl and BlockDecl and adds them to the Decl tree. Then, in ClangExpressionDeclMap it uses the Decl tree to search for a variable. This fixes lots of variable scoping problems.
Reviewers: sivachandra, chaoren, spyffe, clayborg
Subscribers: tberghammer, jingham, lldb-commits
Differential Revision: http://reviews.llvm.org/D12658
llvm-svn: 247746
"gcc" register numbers are now correctly referred to as "ehframe"
register numbers. In almost all cases, ehframe and dwarf register
numbers are identical (the one exception is i386 darwin where ehframe
regnums were incorrect).
The old "gdb" register numbers, which I incorrectly thought were
stabs register numbers, are now referred to as "Process Plugin"
register numbers. This is the register numbering scheme that the
remote process controller stub (lldb-server, gdbserver, core file
support, kdp server, remote jtag devices, etc) uses to refer to the
registers. The process plugin register numbers may not be contiguous
- there are remote jtag devices that have gaps in their register
numbering schemes.
I removed all of the enums for "gdb" register numbers that we had
in lldb - these were meaningless - and I put LLDB_INVALID_REGNUM
in all of the register tables for the Process Plugin regnum slot.
This change is almost entirely mechnical; the one actual change in
here is to ProcessGDBRemote.cpp's ParseRegisters() which parses the
qXfer:features:read:target.xml response. As it parses register
definitions from the xml, it will assign sequential numbers as the
eRegisterKindLLDB numbers (the lldb register numberings must be
sequential, without any gaps) and if the xml file specifies register
numbers, those will be used as the eRegisterKindProcessPlugin
register numbers (and those may have gaps). A J-Link jtag device's
target.xml does contain a gap in register numbers, and it only
specifies the register numbers for the registers after that gap.
The device supports many different ARM boards and probably selects
different part of its register file as appropriate.
http://reviews.llvm.org/D12791
<rdar://problem/22623262>
llvm-svn: 247741
Before we had:
ClangFunction
ClangUtilityFunction
ClangUserExpression
and code all over in lldb that explicitly made Clang-based expressions. This patch adds an Expression
base class, and three pure virtual implementations for the Expression kinds:
FunctionCaller
UtilityFunction
UserExpression
You can request one of these expression types from the Target using the Get<ExpressionType>ForLanguage.
The Target will then consult all the registered TypeSystem plugins, and if the type system that matches
the language can make an expression of that kind, it will do so and return it.
Because all of the real expression types need to communicate with their ExpressionParser in a uniform way,
I also added a ExpressionTypeSystemHelper class that expressions generically can vend, and a ClangExpressionHelper
that encapsulates the operations that the ClangExpressionParser needs to perform on the ClangExpression types.
Then each of the Clang* expression kinds constructs the appropriate helper to do what it needs.
The patch also fixes a wart in the UtilityFunction that to use it you had to create a parallel FunctionCaller
to actually call the function made by the UtilityFunction. Now the UtilityFunction can be asked to vend a
FunctionCaller that will run its function. This cleaned up a lot of boiler plate code using UtilityFunctions.
Note, in this patch all the expression types explicitly depend on the LLVM JIT and IR, and all the common
JIT running code is in the FunctionCaller etc base classes. At some point we could also abstract that dependency
but I don't see us adding another back end in the near term, so I'll leave that exercise till it is actually necessary.
llvm-svn: 247720
Summary:
This was int64_t, but all usages of it came from code that was passing
in unsigned values. The usages of the array size, except for one, were
also treating it as an unsigned value. The usage that treated it as
signed was to try to figure out if it was a complete type or not, but
the callers creating the array didn't seem to be aware of using -1 as
an indicator for an incomplete array.
Reviewers: ribrdb, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12872
llvm-svn: 247662
c:\buildbot\lldb-windows-x86\lldb-windows-x86\llvm\tools\lldb\source\symbol\goastcontext.cpp(906) : warning C4715: 'lldb_private::GoASTContext::GetBitSize' : not all control paths return a value
c:\buildbot\lldb-windows-x86\lldb-windows-x86\llvm\tools\lldb\source\symbol\goastcontext.cpp(1175) : error C4716: 'lldb_private::GoASTContext::ConvertStringToFloatValue' : must return a value
llvm-svn: 247647
* Create new dwo symbol file class
* Add handling for .dwo sections
* Change indexes in SymbolFileDWARF to store compile unit offset next to
DIE offset
* Propagate queries from dwarf compile unit to the dwo compile unit
where applicable
Differential revision: http://reviews.llvm.org/D12291
llvm-svn: 247132
This will keep our code cleaner and it removes the need for intrusive additions to TypeSystem like:
class TypeSystem
{
virtual ClangASTContext *
AsClangASTContext() = 0;
}
As you can now just use the llvm::dyn_cast and other casts.
llvm-svn: 247041
Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
class DWARFASTParser
{
public:
virtual ~DWARFASTParser() {}
virtual lldb::TypeSP
ParseTypeFromDWARF (const lldb_private::SymbolContext& sc,
const DWARFDIE &die,
lldb_private::Log *log,
bool *type_is_new_ptr) = 0;
virtual lldb_private::Function *
ParseFunctionFromDWARF (const lldb_private::SymbolContext& sc,
const DWARFDIE &die) = 0;
virtual bool
CompleteTypeFromDWARF (const DWARFDIE &die,
lldb_private::Type *type,
lldb_private::CompilerType &clang_type) = 0;
virtual lldb_private::CompilerDeclContext
GetDeclContextForUIDFromDWARF (const DWARFDIE &die) = 0;
virtual lldb_private::CompilerDeclContext
GetDeclContextContainingUIDFromDWARF (const DWARFDIE &die) = 0;
};
We have one subclass named DWARFASTParserClang that implements all of the clang specific AST type parsing. This keeps all DWARF parsing in the DWARF plug-in. Moved all of the DWARF parsing code that was in ClangASTContext over into DWARFASTParserClang.
lldb_private::TypeSystem classes no longer have any DWARF parsing functions in them, but they can hand out a DWARFASTParser:
virtual DWARFASTParser *
GetDWARFParser ()
{
return nullptr;
}
This keeps things clean and makes for easy merging when we have different AST's for different languages.
llvm-svn: 246242
Added a new class called DWARFDIE that contains a DWARFCompileUnit and DWARFDebugInfoEntry so that these items always stay together.
There were many places where we just handed out DWARFDebugInfoEntry pointers and then use them with a compile unit that may or may not be the correct one. Clients outside of DWARFCompileUnit and DWARFDebugInfoEntry should all be dealing with DWARFDIE instances instead of playing with DWARFCompileUnit/DWARFDebugInfoEntry pairs manually.
This paves to the way for some modifications that are coming for DWO.
llvm-svn: 246100
These are 2 new value currently in experimental status used when split
debug info is enabled.
Differential revision: http://reviews.llvm.org/D12238
llvm-svn: 245931
The array is indexed by the value in the DW_FORM filed what can be
bigger then the size of the array. This CL add bound checking to avoid
buffer overflows
Differential revision: http://reviews.llvm.org/D12239
llvm-svn: 245930
Create a new "lldb_private::CompilerDeclContext" class that will replace all direct uses of "clang::DeclContext" when used in compiler agnostic code, yet still allow for conversion to clang::DeclContext subclasses by clang specific code. This completes the abstraction of type parsing by removing all "clang::" references from the SymbolFileDWARF. The new "lldb_private::CompilerDeclContext" class abstracts decl contexts found in compiler type systems so they can be used in internal API calls. The TypeSystem is required to support CompilerDeclContexts with new pure virtual functions that start with "DeclContext" in the member function names. Converted all code that used lldb_private::ClangNamespaceDecl over to use the new CompilerDeclContext class and removed the ClangNamespaceDecl.cpp and ClangNamespaceDecl.h files.
Removed direct use of clang APIs from SBType and now use the abstract type systems to correctly explore types.
Bulk renames for things that used to return a ClangASTType which is now CompilerType:
"Type::GetClangFullType()" to "Type::GetFullCompilerType()"
"Type::GetClangLayoutType()" to "Type::GetLayoutCompilerType()"
"Type::GetClangForwardType()" to "Type::GetForwardCompilerType()"
"Value::GetClangType()" to "Value::GetCompilerType()"
"Value::SetClangType (const CompilerType &)" to "Value::SetCompilerType (const CompilerType &)"
"ValueObject::GetClangType ()" to "ValueObject::GetCompilerType()"
many more renames that are similar.
llvm-svn: 245905
for eh_frame and stabs register numberings. This is not
complete but it's a step in the right direction. It's almost
entirely mechanical.
lldb informally uses "gcc register numbering" to mean eh_frame.
Why? Probably because there's a notorious bug with gcc on i386
darwin where the register numbers in eh_frame were incorrect.
In all other cases, eh_frame register numbering is identical to
dwarf.
lldb informally uses "gdb register numbering" to mean stabs.
There are no official definitions of stabs register numbers
for different architectures, so the implementations of gdb
and gcc are the de facto reference source.
There were some incorrect uses of these register number types
in lldb already. I fixed the ones that I saw as I made
this change.
This commit changes all references to "gcc" and "gdb" register
numbers in lldb to "eh_frame" and "stabs" to make it clear
what is actually being represented.
lldb cannot parse the stabs debug format, and given that no
one is using stabs any more, it is unlikely that it ever will.
A more comprehensive cleanup would remove the stabs register
numbers altogether - it's unnecessary cruft / complication to
all of our register structures.
In ProcessGDBRemote, when we get register definitions from
the gdb-remote stub, we expect to see "gcc:" (qRegisterInfo)
or "gcc_regnum" (qXfer:features:read: packet to get xml payload).
This patch changes ProcessGDBRemote to also accept "ehframe:"
and "ehframe_regnum" from these remotes.
I did not change GDBRemoteCommunicationServerLLGS or debugserver
to send these new packets. I don't know what kind of interoperability
constraints we might be working under. At some point in the future
we should transition to using the more descriptive names.
Throughout lldb we're still using enum names like "gcc_r0" and "gdb_r0",
for eh_frame and stabs register numberings. These should be cleaned
up eventually too.
The sources link cleanly on macosx native with xcode build. I
don't think we'll see problems on other platforms but please let
me know if I broke anyone.
llvm-svn: 245141
Another step towards isolating all language/AST specific code into the files to further abstract specific implementations of parsing types for a given language.
llvm-svn: 245090
This is more preparation for multiple different kinds of types from different compilers (clang, Pascal, Go, RenderScript, Swift, etc).
llvm-svn: 244689
This is the work done by Ryan Brown from http://reviews.llvm.org/D8712 that makes a TypeSystem class and abstracts types to be able to use a type system.
All tests pass on MacOSX and passed on linux the last time this was submitted.
llvm-svn: 244679
debugging optimized code. Adds new methods on Function/SBFunction
to query whether a given function is optimized. Adds a new
function.is-optimized format entity and changes the default
frame-format to append "[opt]" if the function was built with
optimization.
The only indication that a binary was built with optimization
that we have right now is the presence of the DW_AT_APPLE_optimized
attribute (DW_FORM_flag value 1) in the DW_TAG_compile_unit.
The absence of this flag may mean that the compile_unit was not
compiled with optimization, or it may mean that the producer
does not generate this attribute.
Currently this only works for dSYM debugging. When we create
the CompileUnit with dwarf-in-.o-file debugging we don't have
the attribute value yet so it's not set. I need to find the
flag value when we do start to read the .o file DWARF and
set the CompileUnit's status at that point - but haven't
done it yet.
I'm also going to add a mechanism for issuing warnings to users
such that they're only issued once in a debug session and
there is away for users to suppress these warnings altogether
via .lldbinit file settings. But I want to get this changeset
committed now that it's at a useful state.
<rdar://problem/19281172>
llvm-svn: 243508
Summary:
This replaces (void)x; usages where they x was subsequently
involved in an assertion with this macro to make the
intent more clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11451
llvm-svn: 243074
Summary:
This enables us to avoid casts to "void *" in some cases and avoids a couple of "casts off const
qualifiers" warnings.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11388
llvm-svn: 242874
for a CXXRecordDecl gets pointed at that record. This can happen when a type is
imported out of and then into the target's AST context without being laid out.
Also added a testcase that covers this scenario.
<rdar://problem/21844453>
llvm-svn: 242687
The mentioned commit introduced a subtle change in behavior when printing variable names. This
occured when we have a variable, for which we only know the demangled name, because the compiler
has failed to provide one (this typically happens for variables in anonymous namespaces). A
Mangled class which contains only a demangled name considers itself to be invalid (this could
possibly be a bug), but it's GetName() method still returns a valid demangled name. The previous
commit introduced the check for the validity of the class, and if it failed, it would fall back
to printing the bare name (without the namespace prefixes, as the tests were expecting). I revert
this part of the commit and check the validity of the string returned by GetName() instead.
llvm-svn: 241795
pointed into the artificial function constructed for the expression. I now make
anything that pointed to the function as its DeclContext be global while the
copy occurs; afterward I restored the old DeclContext.
Added a testcase that make sure that this works properly and doesn't crash
anything.
<rdar://problem/21049838>
llvm-svn: 241695
This API is currently a no-op (in the sense that it has the same behavior as the already existing GetName()), but is meant long-term to provide a best-for-visualization version of the name of a function
It is still not hooked up to the command line 'bt' command, nor to the 'gui' mode, but I do have ideas on how to make that work going forward
rdar://21203242
llvm-svn: 241482
Previously we handled only a few opcode DWARF CFI opcode when we
were parsing the CIE. With this change we use mostly the same code
what we use for parsing the PDE which cover more opcode.
Differential revision: http://reviews.llvm.org/D10866
llvm-svn: 241332
The CFA offset shouldn't be irestored to the saved value in case
of a DW_CFA_restore_state opcode.
Differential revision: http://reviews.llvm.org/D10843
llvm-svn: 241331
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
* Add and fix the emulation of several instruction.
* Disable frame pointer usage on Android.
* Specify return address register for the unwind plan instead of explict
tracking the value of RA.
* Replace prologue detection heuristics (unreliable in several cases)
with a logic to follow the branch instructions and restore the CFI
value based on them. The target address for a branch should have the
same CFI as the source address (if they are in the same function).
* Handle symbols in ELF files where the symbol size is not specified
with calcualting their size based on the next symbol (already done
in MachO files).
* Fix architecture in FuncUnwinders with filling up the inforamtion
missing from the object file with the architecture of the target.
* Add code to read register wehn the value is set to "IsSame" as it
meanse the value of a register in the parent frame is the same as the
value in the current frame.
Differential revision: http://reviews.llvm.org/D10447
llvm-svn: 240533
The problem is for lldb_private::Type instances that have encoding types (pointer/reference/const/volatile/restrict/typedef to type with user ID 0x123). If they started out with m_flags.clang_type_resolve_state being set to eResolveStateUnresolved (0), then when we would call Type::ResolveClangType(eResolveStateForward) we would complete the full type due to logic errors in the code.
We now only complete the type if clang_type_resolve_state is eResolveStateLayout or eResolveStateFull and we correctly upgrade the type's current completion state to eResolveStateForward after we make a forward delcaration to the pointer/reference/const/volatile/restrict/typedef type instead of leaving it set to eResolveStateUnresolved.
llvm-svn: 239752
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
If binding to port 0 is selected, the actual port is printed.
This improves the reliability of platform startup by ensuring that
a free port can be found.
TEST PLAN
./lldb-server platform --listen *:0
Listening for a connection from <port-number>...
Will appear on stdout (with other stuff potentially)
llvm-svn: 238173
Removed some unused variables, added some consts, changed some casts
to const_cast. I don't think any of these changes are very
controversial.
Differential Revision: http://reviews.llvm.org/D9674
llvm-svn: 237218
The ClangASTContext::getTargetInfo() will return NULL in this case and could cause us to crash if we don't check.
<rdar://problem/20543554>
llvm-svn: 236681
Summary:
GetEHFrameAugmentedUnwindPlan duplicated the work of GetEHFrameUnwindPlan in getting the original
plan from DWARF CFI. This changes the function to call GetEHFrameUnwindPlan instead of doing all
the work itself. A copy constructor is added to UnwindPlan to enable plan copying.
Test Plan: No regressions on linux test suite.
Reviewers: jasonmolenda, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9369
llvm-svn: 236607
compact unwind encodings for x86_64 / i386 omit-frame-pointer
code. It was possible for lldb to get the location of saved
registers incorrect for some of these functions.
<rdar://problem/20753264>
llvm-svn: 236478
Summary: Just what it says on the box.
Reviewers: jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9150
llvm-svn: 235493
module-loading support for the expression parser.
- It adds support for auto-loading modules referred
to by a compile unit. These references are
currently in the form of empty translation units.
This functionality is gated by the setting
target.auto-import-clang-modules (boolean) = false
- It improves and corrects support for loading
macros from modules, currently by textually
pasting all #defines into the user's expression.
The improvements center around including only those
modules that are relevant to the current context -
hand-loaded modules and the modules that are imported
from the current compile unit.
- It adds an "opt-in" mechanism for all of this
functionality. Modules have to be explicitly
imported (via @import) or auto-loaded (by enabling
the above setting) to enable any of this
functionality.
It also adds support to the compile unit and symbol
file code to deal with empty translation units that
indicate module imports, and plumbs this through to
the CompileUnit interface.
Finally, it makes the following changes to the test
suite:
- It adds a testcase that verifies that modules are
automatically loaded when the appropriate setting
is enabled (lang/objc/modules-auto-import); and
- It modifies lanb/objc/modules-incomplete to test
the case where a module #undefs something that is
#defined in another module.
<rdar://problem/20299554>
llvm-svn: 235313
context as the first thing we do. This prevents
crashes if some of the initial setup produces
messages or errors.
<rdar://problem/20457882>
llvm-svn: 234511
Summary:
If a struct type S has a member T that has a member that is a function that
returns a typedef of S* the respective field would be duplicated, which caused
an assert down the line in RecordLayoutBuilder. This patch adds a check that
removes the possibility of trying to resolve the same type twice within the
same callstack.
This commit also adds unit tests for these failures.
Fixes https://llvm.org/bugs/show_bug.cgi?id=20486.
Patch by Cristian Hancila.
Test Plan: Run unit tests.
Reviewers: clayborg spyffe
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8561
llvm-svn: 234441
There were a couple of real bugs here regarding error checking and
signed/unsigned comparisons, but mostly these were just noise.
There was one class of bugs fixed here which is particularly
annoying, dealing with MSVC's non-standard behavior regarding
the underlying type of enums. See the comment in
lldb-enumerations.h for details. In short, from now on please use
FLAGS_ENUM and FLAGS_ANONYMOUS_ENUM when defining enums which
contain values larger than can fit into a signed integer.
llvm-svn: 233943
The underlying type of wchar_t is not defined by the standard. This CL
add logic to correctly use the type specified for the current target
based on TargetInfo.
llvm-svn: 233795
A char can have signed and unsigned encoding but previously lldb always
assumed it is signed. This CL adds a logic to detect the encoding of
'char' types based on the default encoding on the target architecture.
It fixes variable printing and expression evaluation on architectures
where 'char' is signed by default.
Differential revision: http://reviews.llvm.org/D8636
llvm-svn: 233682
Since ClangASTSource::layoutRecordType() was overriding a virtual
function in the base, this was inadvertently causing a new method
to be introduced rather than an override. To fix this all method
signatures are changed back to taking DenseMaps, and the `override`
keyword is added to make sure this type of error doesn't happen
again.
To keep the original fix intact, which is that fields and bases
must be added in offset order, the ImportOffsetMap() function
now copies the DenseMap into a vector and then sorts the vector
on the value type (e.g. the offset) before iterating over the
sorted vector and inserting the items.
llvm-svn: 233099
Summary:
This commit adds this alternate route only when parsing variable dies
corresponding to global or static variables. The motivation for this is that GCC
does not emit linkage names for functions and variables declared/defined in
anonymous namespaces. Having this alternate route fixes one part of
TestNamespace which fails when the test case is compiled with GCC.
An alternate route to get fully qualified names of functions whose linkage names
are missing will be added with a followup change. With that, the other failing
part of TestNamespace will also be fixed.
Test Plan: dotest.py -C gcc -p TestNamespace
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8569
llvm-svn: 233098
Prior to this patch, we would try to synthesize class types by
iterating over a DenseMap of FieldDecls and adding each one to
a CXXRecordDecl. Since a DenseMap doesn't provide a deterministic
ordering of the elements, this would not add the fields in
FieldOffset order, but rather in some random order determined by
the memory layout of the DenseMap.
This patch fixes the issue by changing DenseMaps to vectors. The
ability to lookup a value in the DenseMap was hardly being used,
and where it is sufficient to do a vector lookup.
Differential Revision: http://reviews.llvm.org/D8512
llvm-svn: 233090
So that we don't have to update every single #include in the entire
codebase to #include this new header (which used to get included by
lldb-private-log.h, we automatically #include "Logging.h" from
within "Log.h".
llvm-svn: 232653
This removes Host::Backtrace from the codebase, and changes all
call sites to use llvm::sys::PrintStackTrace(). This makes the
functionality available for all platforms, and even for platforms
which currently had a supported implementation of Host::Backtrace,
this patch should enable richer information in stack traces, such
as file and line number information, as well as giving it the
ability to unwind through inlined functions.
llvm-svn: 231511
- use a hardcoded formatter to match all vector types, and make it so that their element type is taken into account when doing default formatting
- special case a vector of char to display byte values instead of characters by default
Fixes the test failures Ilia was seeing
llvm-svn: 231504
Summary:
Symbols in ELF files can be versioned, but LLDB currently does not understand these. This problem
becomes apparent once one loads glibc with debug info. Here (in the .symtab section) the versions
are embedded in the name (name@VERSION), which causes issues when evaluating expressions
referencing memcpy for example (current glibc contains memcpy@@GLIBC_2.14 and
memcpy@GLIBC_2.2.5).
This problem was not evident without debug symbols as the .dynsym section
stores the bare names and the actual versions are present in a separate section (.gnu.version_d),
which LLDB ignores. This resulted in two definitions of memcpy in the symbol table.
This patch adds support for storing annotated names to the Symbol class. If
Symbol.m_contains_linker_annotations is true then this symbol is annotated. Unannotated name can
be obtained by calling StripLinkerAnnotations on the corresponding ObjectFile. ObjectFileELF
implements this to strip @VERSION suffixes when requested. Symtab uses this function to add the
bare name as well as the annotated name to the name lookup table.
To preserve the size of the Symbol class, I had to steal one bit from the m_type field.
Test Plan:
This fixes TestExprHelpExamples.py when run with a glibc with debug symbols. Writing
an environment agnostic test case would require building a custom shared library with symbol
versions and testing symbol resolution against that, which is somewhat challenging.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8036
llvm-svn: 231228
Debugger.h is a huge file that gets included everywhere, and
FormatManager.h brings in a ton of unnecessary stuff and doesn't
even use anything from it in the header.
llvm-svn: 231161
When we have a debug map we have an executable with a bunch of STAB symbols and each source file has a N_SO symbol which scopes a bunch of symbols inside of it. We can use this to our advantage here when looking for the complete definition of an objective C class by looking for a symbol whose name matches the class name and whose type is eSymbolTypeObjCClass. If we find one, that symbol will be contained within a N_SO symbol. This symbol gets turned into a symbol whose type is eSymbolTypeSourceFile and that symbol will contain the eSymbolTypeObjCClass which helps us to locate the correct .o file and allows us to only look in that file.
To further accelerate things, if we are looking for the implementation, we can avoid looking at all .o files if we don't find a matching symbol because we have a debug map, which means the objective C symbol for the class can't have been stripped, so we can safely not search all remaining .o files. This will save us lots of time when trying to look for "NSObject" and any other AppKit and Foundation classes that we never have implementation definitions for.
<rdar://problem/19234225>
llvm-svn: 230562
Summary:
This patch enables evaluation of DWARF expressions setting the CFA during stack unwinding.
This makes TestSigtrampUnwind "almost" pass on linux. I am not enabling the test yet since the
symbol name for the signal trampoline does not get resolved properly due to a different bug, but
apart from that, the backtrace is sane.
I am unsure how this change affects Mac. I think it makes the unwinder prefer the DWARF unwind
plan instead of some custom platform-dependant plan. However, it does not affect the end result
- the stack unwinding works as expected.
Reviewers: jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7792
llvm-svn: 230211
Summary:
This change refactors UnwindPlan::Row to be able to store the fact that the CFA is value is set
by evaluating a dwarf expression (DW_CFA_def_cfa_expression). This is achieved by creating a new
class CFAValue and moving all CFA setting/getting code there. Note that code using the new
CFAValue::isDWARFExpression is not yet present and will be added in a follow-up patch. Therefore,
this patch should not change the functionality in any way.
Test Plan: Ran tests on Mac and Linux. No regressions detected.
Reviewers: jasonmolenda, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7755
llvm-svn: 230210
changing it was in r219544 - after living on that for a few
months, I wanted to take another crack at this.
The disassembly-format setting still exists and the old format
can be user specified with a setting like
${current-pc-arrow}${addr-file-or-load}{ <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>}:
This patch was discussed in http://reviews.llvm.org/D7578
<rdar://problem/19726421>
llvm-svn: 229186
There was a test in the test suite that was triggering the backtrace logging output that requested that the client pass an execution context. Sometimes we need the process for Objective C types because our static notion of the type might not align with the reality when being run in a live runtime.
Switched from an "ExecutionContext *" to an "ExecutionContextScope *" for greater ease of use.
llvm-svn: 228892
- you have a type that contains a typedef to a VectorType or an ExtVectorType
- that type is returned from an ARM function that LLDB steps over so we try to figure out the return type
- we try to determine if the type is a homogeneous aggregate type and we crash
We get not using getAs() when we should have been and using llvm::cast caused an assertion crash when the typedef type didn't return a valid VectorType or ExtVectorType.
<rdar://problem/19646550>
llvm-svn: 228771
The problem occurred when we had incorrect address ranges in the debug map that included the padding between functions causing the end address of a line table entry to fall into an inlinked (next function) address range.
<rdar://problem/19721144>
llvm-svn: 228707
This was causing code that opened multiple targets to try and get a path to debugserver from the GDB remote communication class, and it would get the LLDB path and some instances would return empty strings and it would cause debugserver to not be found.
<rdar://problem/18756927>
llvm-svn: 227935
And since enough of these are doing the right thing, add a test case to verify we are doing the right thing with freeze drying ObjC object types
Fixes rdar://18092770
llvm-svn: 227282
This is necessary because the byte size of an ObjC class type is not reliably statically knowable (e.g. because superclasses sit deep in frameworks that we have no debug info for)
The lack of reliable size info is a problem when trying to freeze-dry an ObjC instance (not the pointer, the pointee)
This commit lays the foundation for having language runtimes help in figuring out byte sizes, and having ClangASTType ask for runtime help
No feature change as no runtime actually implements the logic, and nowhere is an ExecutionContext passed in yet
llvm-svn: 227274
i386/x86_64 functions. The stack size was being multiplied by the
pointer size incorrectly. The register permutation placeholders
(UNWIND_X86_REG_NONE) were decrementing the stack offset of the
saved registers when it should not have been.
<rdar://problem/19570035>
llvm-svn: 226889
The refactor was motivated by some comments that Greg made
http://reviews.llvm.org/D6918
and also to break a dependency cascade that caused functions linking
in string->int conversion functions to pull in most of lldb
llvm-svn: 226199
This is done by adding a "Variable *" to SymbolContext and allowing SymbolFile::ResolveSymbolContext() so if an address is resolved into a symbol context, we can include the global or static variable for that address.
This means you can now find global variables that are merged globals when doing a "image lookup --verbose --address 0x1230000". Previously we would resolve a symbol and show "_MergedGlobals123 + 1234". But now we can show the global variable name.
The eSymbolContextEverything purposely does not include the new eSymbolContextVariable in its lookup since stack frame code does many lookups and we don't want it triggering the global variable lookups.
<rdar://problem/18945678>
llvm-svn: 226084
step through the complete function looking for any epilogue
instructions. If we find an epilogue sequence, re-instate
the correct unwind instructions if there is more code past
that epilogue -- this will correctly handle an x86 function
with multiple epilogues in it.
NB there is still a bug with the "eh_frame augmented"
UnwindPlans and mid-function epilogues. Looking at that next.
<rdar://problem/18863406>
llvm-svn: 225770
This completes the compact unwind support for x86 targets.
I'm still skipping the UNWIND_X86_64_MODE_STACK_IND encodings for
x86_64 right now because clang was emitting bad data for this form
until it was fixed in r217020 circa Sep 2014.
arm64 parsing still needs to be added.
llvm-svn: 224698
Most of the changes are to the FuncUnwinders class -- as we've added
more types of unwind information, the way this class was written was
making it a mess to maintain. Instead of trying to keep one
"non-call site" unwind plan and one "call site" unwind plan, track
all the different types of unwind plans we can possibly retrieve for
each function and have the call-site/non-call-site accessor methods
retrieve those.
Add a real "fast unwind plan" for x86_64 / i386 -- when doing an
unwind through a function, this only has to read the first 4 bytes
to tell if the function has a standard prologue sequence. If so,
we can use the architecture default unwind plan to backtrace
through this function. If we try to retrieve the save location for
other registers later on, a real unwind plan will be used. This
one is just for doing fast backtraces.
Change the compact unwind plan importer to fill in the valid address
range it is valid for.
Compact unwind, in theory, may have multiple entries for a single
function. The FuncUnwinders rewrite includes the start of supporting
this correctly. In practice compact unwind encodings are used for
the entire range of the function today -- in fact, sometimes the same
encoding is used for multiple functions that have the same unwind
rules. But I want to handle a single function that has multiple
different compact unwind UnwindPlans eventually.
llvm-svn: 224689
When lldb has a binary with protected section contents,
don't use the on-disk representation of that compact
uwnind -- read it only out of live memory where it has
been decrypted.
llvm-svn: 224670
The compact unwind importer is getting the wrong unwind info for one
case that I found. I haven't been able to fix the problem tonight
and I don't want to leave TOT behaving incorrectly, so just ignore
compact unwind until I can get to the bottom of this.
llvm-svn: 224321
section for x86_64 and i386 targets on Darwin systems. Currently only the
compact unwind encoding for normal frame-using functions is supported but it
will be easy handle frameless functions when I have a bit more free time to
test it. The LSDA and personality routines for functions are also retrieved
correctly for functions from the compact unwind section.
This new code is very fresh -- it passes the lldb testsuite and I've done
by-hand inspection of many functions and am getting correct behavior for all
of them. There may need to be some bug fixing over the next couple weeks as
I exercise and test it further. But I think it's fine right now so I'm
committing it.
<rdar://problem/13220837>
llvm-svn: 223625
encounter clang::ExternalASTSources that are not instances
of ClangExternalASTSourceCommon. We used to blithely
assume that all are, and so we could use static_cast<>.
That's no longer the case, so we have to have these AST
sources register themselves.
llvm-svn: 223560
support to LLDB. It includes the following:
- Changed DeclVendor to TypeVendor.
- Made the ObjCLanguageRuntime provide a DeclVendor
rather than a TypeVendor.
- Changed the consumers of TypeVendors to use
DeclVendors instead.
- Provided a few convenience functions on
ClangASTContext to make that easier.
llvm-svn: 223433
retrieves the personality routine addr and the
LSDA addr. Don't bother checking with the
"non-call site" unwind plan - this kind of
information is only going to come from the
call site unwind plan.
llvm-svn: 222226
eh_frame data. These two pieces of information are used in the
process of exception handler unwinding on SysV ABI systems.
This patch reads the data from the eh_frame section
(DWARFCallFrameInfo.cpp), allows for it to be saved & read out
of a given UnwindPlan (UnwindPlan.h, UnwindPlan.cpp) - as well
as printing the information in the UnwindPlan::Dump method - and
adds methods to the FuncUnwinders object so that higher levels
can query if a given function has an LSDA / personality routine
defined.
It's only lightly tested, but seems to be working correctly as long
as your have this information in eh_frame. Does not address getting
this information from compact unwind yet on Darwin systems.
<rdar://problem/18742797>
llvm-svn: 222214
Fixed include:
- Change Platform::ResolveExecutable(...) to take a ModuleSpec instead of a FileSpec + ArchSpec to help resolve executables correctly when we have just a path + UUID (no arch).
- Add the ability to set the listener in SBLaunchInfo and SBAttachInfo in case you don't want to use the debugger as the default listener.
- Modified all places that use the SBLaunchInfo/SBAttachInfo and the internal ProcessLaunchInfo/ProcessAttachInfo to not take a listener as a parameter since it is in the launch/attach info now
- Load a module's sections by default when removing a module from a target. Since we create JIT modules for expressions and helper functions, we could end up with stale data in the section load list if a module was removed from the target as the section load list would still have entries for the unloaded module. Target now has the following functions to help unload all sections a single or multiple modules:
size_t
Target::UnloadModuleSections (const ModuleList &module_list);
size_t
Target::UnloadModuleSections (const lldb::ModuleSP &module_sp);
llvm-svn: 222167
relative paths, like:
/whatever/llvm/lib/Sema/../../include/llvm/Sema/
That causes problems with our type uniquing, since we use the declaration file
and line as one component of the uniquing, and different ways of getting to the
same file will have different directory spellings, though they are functionally
equivalent. We end up with two copies of the exact same type because of this,
and that makes the expression parser give "duplicate type" errors.
I added a method to resolve paths with ../ in them and used that in the FileSpec::Equals,
for comparing Declarations and for doing Breakpoint compares as well, since they also
suffer from this if you specify breakpoints by full path (since nobody knows what
../'s to insert...)
<rdar://problem/18765814>
llvm-svn: 222075
Summary:
PowerPC handles the stack chain with the current stack pointer being a pointer
to the backchain (CFA). LLDB currently has no way of handling this, so this
adds a "CFA is dereferenced from a register" type.
Discussed with Jason Molenda, who also provided the initial patch for this.
Reviewers: jasonmolenda
Reviewed By: jasonmolenda
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6182
llvm-svn: 221788
let's let lldb try the arch default unwind every time but not destructively --
it doesn't permanently replace the main unwind method for that function from
now on.
This fix is for <rdar://problem/18683658>.
I tested it against Ryan Brown's go program test case and also a
collection of core files of tricky unwind scenarios
<rdar://problem/15664282> <rdar://problem/15835846>
<rdar://problem/15982682> <rdar://problem/16099440>
<rdar://problem/17364005> <rdar://problem/18556719>
that I've fixed over the last 6-9 months.
llvm-svn: 221238
output style can be customized. Change the built-in default to be
more similar to gdb's disassembly formatting.
The disassembly-format for a gdb-like output is
${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>:
The disassembly-format for the lldb style output is
{${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}:
The two backticks in the lldb style formatter triggers the sub-expression evaluation in
CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to
use ' characters instead of ` would work around that.
<rdar://problem/9885398>
llvm-svn: 219544
works, as do breakpoints, run and pause, display zeroth frame.
See
http://reviews.llvm.org/D5503
for a fuller description of the changes in this commit.
llvm-svn: 218596
For the Objective-C case, we do not have a "function type" notion, so we actually end up wrapping the clang ObjCMethodDecl in the Impl object, and ask function-y questions of it
In general, you can always ask for return type, number of arguments, and type of each argument using the TypeMemberFunction layer - but in the C++ case, you can also acquire a Type object for the function itself, which instead you can't do in the Objective-C case
llvm-svn: 218132
In practice, 64bit eh_frame is not used even for x86_64 binaries. The main reason is in eh_frame we almost always use pc-relative addressing, so addresses are within 32bits and gcc just sticks to 32bit eh_frame.
I generated 64bit eh_frame for Android Java runtime and unwind successfully in gdb, and in lldb with this patch.
Patch by Tong Shen.
llvm-svn: 216409
We decided to use assmbly profiler instead of eh_frame for frame 0 because for compiler generated code, eh_frame is usually synchronous(a.k.a. only valid at call site); and we have no way to tell if it's asynchronous or not.
But for x86 & x86_64 compiler generated code:
1. clang & GCC describes all prologue instructions in eh_frame;
2. mid-function stack pointer altering instructions can be easily detected.
So we can grab eh_frame, and use assembly profiler to augment it into asynchronous unwind table.
This change also benefits hand-written assembly; eh_frame for hand-written assembly is often asynchronous,so we have a much better chance to successfully unwind through them.
Change by Tong Shen.
llvm-svn: 216406
with binaries in the dyld shared cache (esp on iOS) where the file
address for the executable binary (maybe from memory, maybe from
an expanded copy of the dyld shared cache) is different from the
file address in the dSYM. In that case, ObjectFileMachO replaces
the file addresses from the original binary with the dSYM file
addresses (usually 0-based) -- lldb doesn't have a notion of two
file addresses for a given module so they need to agree.
There was a cache of file addresses over in the Symtab so I added
a method to the Module and the objects within to clear any file address
caches if they exist, and added an implementation in the Symtab
module to do that.
<rdar://problem/16929569>
llvm-svn: 216258
What it does:
- it introduces a concept of EncodingToType to the ObjCLanguageRuntime
The ObjC runtime has a "type encoding" feature that describes types as strings
The EncodingToType is a decoder for that format, making types out of type encoding strings
This feature already existed in some shape as we were using it to create method signatures out of the runtime, but this checkin extends the parser to support the full syntax, and moves things so that more parts of LLDB have access to this decoder
- it splits the ClassDescriptorV2 object to its own file, it was starting to grow too large
- it adds to the ClassDescriptor mechanism a notion of ivar storage; the ObjC runtime vends ivar information as well as method information
While ivar information is not ready for prime type (i.e. we don't want to add it to the runtime generated types for expression evaluator usage), there are potentially useful scenarios in which realizing ivar types could be useful. For now, the ClassDescriptor is going to hold ivar information directly. Existing code already allows describing ivars, this patch hooks those moving parts up so that one can actually ask a ClassDescriptor about ivars for the class it represents
and as a couple minor niceties:
- it makes it possible to retrieve the LLDB ClangASTContext that is associated to a clang::ASTContext
- it extends the ValueObject-to-ClassDescriptor API in the language runtime to deal correctly with base-class hierarchies
llvm-svn: 216026
we overrode debug information as the authoritative
source for type information, substituting types
from the Objective-C runtime. The runtime should
never be the primary source.
<rdar://problem/16065049>
llvm-svn: 214583
The fix adds a std::weak_ptr<Module> into the TypeImpl and fills in the weak pointer when possible. It also checks to make sure the module is still alive prior to using it which should make our API safer to use.
<rdar://problem/15455145>
llvm-svn: 212853
off_t is a type which is used for file offsets. Even more
specifically, it is only used by a limited number of C APIs that
deal with files. Any usage of off_t where the variable is not
intended to be used with one of these APIs is a bug, by definition.
This patch corrects some easy mis-uses of off_t, generally by
converting them to lldb::offset_t, but sometimes by using other
types such as size_t, when appropriate.
The use of off_t to represent these offsets has worked fine in
practice on linux-y platforms, since we used _FILE_OFFSET_64 to
guarantee that off_t was a uint64. On Windows, however,
_FILE_OFFSET_64 is unrecognized, and off_t will always be 32-bit.
So the usage of off_t on Windows actually leads to legitimate bugs.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4358
llvm-svn: 212192
to modify the same UnwindTable object simultaneously. Fix
HistoryThread and HistoryUnwind's mutex lock acqusition to
retain the lock for the duration of the operation instead of
releasing the temporary immediately.
<rdar://problem/17055023>
llvm-svn: 211241
The compiler, when JIT'ing code, can emit illegal DWARF line tables (address is line table sequences must increase). This changes fixes that issue by replacing previous line entries whose start address is the same with the new line entry to avoid having multiple line entries with the same address. Since the address range of lines entries is determined by the delta between the current and next line entry, this shouldn't cause any issues.
llvm-svn: 211212
- Fix Xcode project to have source files for SBTypeEnumMember.h/SBTypeEnumMember.cpp in the right place
- Rename a member variable to inluce "_sp" suffix since it is a shared pointer
- Cleanup initialization code for TypeEnumMemberImpl to not warn about out of order initialization
llvm-svn: 210051
of the symbol itself rather than forcing clients to do
it. This simplifies the logic for the expression
parser a great deal.
<rdar://problem/16935324>
llvm-svn: 209494
and sharing it with all of its FuncUnwinders, have each FuncUnwinder
create an AssemblyProfiler on demand as needed. I was worried that
the cost of creating the llvm disassemblers would be high for this
approach but it's not supposed to be an expensive operation, and it
means we don't need to add locks around this section of code.
<rdar://problem/16992332>
llvm-svn: 209493
to its unwind assembly profiler to all of the FuncUnwinders (one
per symbol) under it. If lldb is running multiple targets, you
could get two different FuncUnwinders in the same Module trying
to use the same llvm disassembler simultaneously and that may be
a re-entrancy problem.
Instead, the UnwindTable has the unwind assembly profiler and when
the FuncUnwinders want to use it, they get exclusive access to
the assembly profiler until they're done using it.
<rdar://problem/16992332>
llvm-svn: 209488
Rationale:
Pretty simply, the idea is that sometimes type names are way too long and contain way too many details for the average developer to care about. For instance, a plain ol' vector of int might be shown as
std::__1::vector<int, std::__1::allocator<....
rather than the much simpler std::vector<int> form, which is what most developers would actually type in their code
Proposed solution:
Introduce a notion of "display name" and a corresponding API GetDisplayTypeName() to return such a crafted for visual representation type name
Obviously, the display name and the fully qualified (or "true") name are not necessarily the same - that's the whole point
LLDB could choose to pick the "display name" as its one true notion of a type name, and if somebody really needs the fully qualified version of it, let them deal with the problem
Or, LLDB could rename what it currently calls the "type name" to be the "display name", and add new APIs for the fully qualified name, making the display name the default choice
The choice that I am making here is that the type name will keep meaning the same, and people who want a type name suited for display will explicitly ask for one
It is the less risky/disruptive choice - and it should eventually make it fairly obvious when someone is asking for the wrong type
Caveats:
- for now, GetDisplayTypeName() == GetTypeName(), there is no logic to produce customized display type names yet.
- while the fully-qualified type name is still the main key to the kingdom of data formatters, if we start showing custom names to people, those should match formatters
llvm-svn: 209072
Enable data formatters to see-through pointers/references to typedefs
For instance, if Foo is a typedef to Bar, and there is a formatter for any/all of Bar*, Bar&, Bar&&, then Foo*, Foo&, and Foo&& should pick these up if Foo-specific formatters don't exist
llvm-svn: 205939
This is a purely mechanical change explicitly casting any parameters for printf
style conversion. This cleans up the warnings emitted by gcc 4.8 on Linux.
llvm-svn: 205607
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
(lldb) b puts
(lldb) expr -g -i0 -- (int)puts("hello")
First we will stop at the entry point of the expression before it runs, then we can step over a few times and hit the breakpoint in "puts", then we can continue and finishing stepping and fininsh the expression.
Main features:
- New ObjectFileJIT class that can be easily created for JIT functions
- debug info can now be enabled when parsing expressions
- source for any function that is run throught the JIT is now saved in LLDB process specific temp directory and cleaned up on exit
- "expr -g --" allows you to single step through your expression function with source code
<rdar://problem/16382881>
llvm-svn: 204682
This is a mechanical cleanup of unused functions. In the case where the
functions are referenced (in comment form), I've simply commented out the
functions. A second pass to clean that up is warranted.
The functions which are otherwise unused have been removed. Some of these were
introduced in the initial commit and not in use prior to that point!
NFC
llvm-svn: 204310
Fix a bug where calling SBFrame::FindValue() would cause a copy of all variables in the block to be inserted in the frame's variable list, regardless of whether those same variables were there or not - which means one could end up with a frame with lots of duplicate copies of the same variables
llvm-svn: 201614
Zachary Turner