Summary:
This fixes support in DAGISelMatcher backend for DAG nodes with multiple
result values. Previously the order of results in selected DAG nodes always
matched the order of results in ISel patterns. After the change the order of
results matches the order of operands in OutOperandList instead.
For example, given this definition from the attached test case:
def INSTR : Instruction {
let OutOperandList = (outs GPR:$r1, GPR:$r0);
let InOperandList = (ins GPR:$t0, GPR:$t1);
let Pattern = [(set i32:$r0, i32:$r1, (udivrem i32:$t0, i32:$t1))];
}
the DAGISelMatcher backend currently produces a matcher that creates INSTR
nodes with the first result `$r0` and the second result `$r1`, contrary to the
order in the OutOperandList. The order of operands in OutOperandList does not
matter at all, which is unexpected (and unfortunate) because the order of
results of a DAG node does matters, perhaps a lot.
With this change, if the order in OutOperandList does not match the order in
Pattern, DAGISelMatcherGen emits CompleteMatch opcodes with the order of
results taken from OutOperandList. Backend writers can use it to express
result reorderings in TableGen.
If the order in OutOperandList matches the order in Pattern, the result of
DAGISelMatcherGen is unaffected.
Patch by Eugene Sharygin
Reviewers: andreadb, bjope, hfinkel, RKSimon, craig.topper
Reviewed By: craig.topper
Subscribers: nhaehnle, craig.topper, llvm-commits
Differential Revision: https://reviews.llvm.org/D55055
llvm-svn: 348326
When tablegen detects that there exist two subregister compositions that
result in the same value for some register, it will emit a warning. This
kind of an overlap in compositions should only happen when it is caused
by a user-defined composition. It can happen, however, that the user-
defined composition is not identically equal to another one, but it does
produce the same value for one or more registers. In such cases suppress
the warning.
This patch is to silence the warning when building the System Z backend
after D50725.
Differential Revision: https://reviews.llvm.org/D50977
llvm-svn: 347894
There are quite strong constraints on how you can use the TIED_TO
constraint between MC operands, many of which are currently not
checked until compiler run time.
MachineVerifier enforces that operands can only be tied together in
pairs (no three-way ties), and MachineInstr::tieOperands enforces that
one of the tied operands must be an output operand (def) and the other
must be an input operand (use).
Now we check these at TableGen time, so that if you violate any of
them in a new instruction definition, you find out immediately,
instead of having to wait until you compile something that makes code
generation hit one of those assertions.
Also in this commit, all the error reports in ParseConstraint now
include the name and source location of the def where the problem
happened, so that if you do trigger any of these errors, it's easier
to find the part of your TableGen input where you made the mistake.
The trunk sources already build successfully with this additional
error check, so I think no in-tree target has any of these problems.
Reviewers: fhahn, lhames, nhaehnle, MatzeB
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53815
llvm-svn: 347743
Summary:
The issue with the python path is that the path to python on Windows can contain spaces. To make the tests always work, the path to python needs to be surrounded by quotes.
This change updates several configuration files which specify the path to python as a substitution and also remove quotes from existing tests.
Reviewers: asmith, zturner, alexshap, jakehehrlich
Reviewed By: zturner, alexshap, jakehehrlich
Subscribers: mehdi_amini, nemanjai, eraman, kbarton, jakehehrlich, steven_wu, dexonsmith, stella.stamenova, delcypher, llvm-commits
Differential Revision: https://reviews.llvm.org/D50206
llvm-svn: 339073
Summary: The path to the python executable can contain spaces, so it should be specified with quotes.
Reviewers: asmith, simon_tatham
Reviewed By: simon_tatham
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49258
llvm-svn: 337006
The aim of this backend is to output everything TableGen knows about
the record set, similarly to the default -print-records backend. But
where -print-records produces output in TableGen's input syntax
(convenient for humans to read), this backend produces it as
structured JSON data, which is convenient for loading into standard
scripting languages such as Python, in order to extract information
from the data set in an automated way.
The output data contains a JSON representation of the variable
definitions in output 'def' records, and a few pieces of metadata such
as which of those definitions are tagged with the 'field' prefix and
which defs are derived from which classes. It doesn't dump out
absolutely every piece of knowledge it _could_ produce, such as type
information and complicated arithmetic operator nodes in abstract
superclasses; the main aim is to allow consumers of this JSON dump to
essentially act as new backends, and backends don't generally need to
depend on that kind of data.
The new backend is implemented as an EmitJSON() function similar to
all of llvm-tblgen's other EmitFoo functions, except that it lives in
lib/TableGen instead of utils/TableGen on the basis that I'm expecting
to add it to clang-tblgen too in a future patch.
To test it, I've written a Python script that loads the JSON output
and tests properties of it based on comments in the .td source - more
or less like FileCheck, except that the CHECK: lines have Python
expressions after them instead of textual pattern matches.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: arichardson, labath, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D46054
llvm-svn: 336771
The vast number of added instructions for SVE causes TableGen to fail with an assertion:
Assertion `Delta < 65536U && "disassembler decoding table too large!"'
This patch increases the number of supported decoder fix-ups.
Reviewers: dmgreen, stoklund, petpav01
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D48937
llvm-svn: 336334
Implements PR34259
Intrinsics.h is a very popular header. Most LLVM TUs care about things
like dbg_value, but they don't care how they are implemented. After I
split these out, IntrinsicImpl.inc is 1.7 MB, so this saves each LLVM TU
from scanning 1.7 MB of source that gets pre-processed away.
It also means we can modify intrinsic properties without triggering a
full rebuild, but that's probably less of a win.
I think the next best thing to do would be to split out the target
intrinsics into their own header. Very, very few TUs care about
target-specific intrinsics. It's very hard to split up the target
independent intrinsics like llvm.expect, assume, and dbg.value, though.
llvm-svn: 335407
Summary:
This is essentially a rewrite of the backend which introduces TableGen
base classes GenericEnum, GenericTable, and SearchIndex. They allow
generating custom enums and tables with lookup functions using
separately defined records as the underlying database.
Also added as part of this change:
- Lookup functions may use indices composed of multiple fields.
- Instruction fields are supported similar to Intrinsic fields.
- When the lookup key has contiguous numeric values, the lookup
function will directly index into the table instead of using a binary
search.
The existing SearchableTable functionality is internally mapped to the
new primitives.
Change-Id: I444f3490fa1dbfb262d7286a1660a2c4308e9932
Reviewers: arsenm, tra, t.p.northover
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D48013
llvm-svn: 335225
Summary:
This also allows inner foreach loops to have a list that depends on
the iteration variable of an outer foreach loop. The test cases show
some very simple examples of how this can be used.
This was perhaps the last remaining major non-orthogonality in the
TableGen frontend.
Change-Id: I79b92d41a5c0e7c03cc8af4000c5e1bda5ef464d
Reviewers: tra, simon_tatham, craig.topper, MartinO, arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D47431
llvm-svn: 335221
So far, we've only handled special cases of PatFrag like ImmLeaf. This patch
adds support for the remaining cases using similar mechanisms.
Like most C++ code from SelectionDAG, GISel and DAGISel expect to operate on
different types and representations and as such the code is not compatible
between the two. It's therefore necessary to add an alternative implementation
in the GISelPredicateCode field.
The target test for this feature could easily be done with IntImmLeaf and this
would save on a little boilerplate. The reason I've chosen to implement this
using PatFrag.GISelPredicateCode and not IntImmLeaf is because I was unable to
find a rule that was blocked solely by lack of support for PatFrag predicates. I
found that the ones I investigated as being likely candidates for the test
were further blocked by other things.
llvm-svn: 334871
Summary:
The new rules are straightforward. The main rules to keep in mind
are:
1. NAME is an implicit template argument of class and multiclass,
and will be substituted by the name of the instantiating def/defm.
2. The name of a def/defm in a multiclass must contain a reference
to NAME. If such a reference is not present, it is automatically
prepended.
And for some additional subtleties, consider these:
3. defm with no name generates a unique name but has no special
behavior otherwise.
4. def with no name generates an anonymous record, whose name is
unique but undefined. In particular, the name won't contain a
reference to NAME.
Keeping rules 1&2 in mind should allow a predictable behavior of
name resolution that is simple to follow.
The old "rules" were rather surprising: sometimes (but not always),
NAME would correspond to the name of the toplevel defm. They were
also plain bonkers when you pushed them to their limits, as the old
version of the TableGen test case shows.
Having NAME correspond to the name of the toplevel defm introduces
"spooky action at a distance" and breaks composability:
refactoring the upper layers of a hierarchy of nested multiclass
instantiations can cause unexpected breakage by changing the value
of NAME at a lower level of the hierarchy. The new rules don't
suffer from this problem.
Some existing .td files have to be adjusted because they ended up
depending on the details of the old implementation.
Change-Id: I694095231565b30f563e6fd0417b41ee01a12589
Reviewers: tra, simon_tatham, craig.topper, MartinO, arsenm, javed.absar
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D47430
llvm-svn: 333900
This patch continues a series of patches started by r332907 (reapplied
as r332917).
In this commit we move register bank checks back from epilogue of
every rule matcher to a position locally close to the rest of the
checks for a particular (nested) instruction.
This increases the number of common conditions within 2nd level
groups.
This is expected to decrease time GlobalISel spends in its
InstructionSelect pass by about 2% for an -O0 build as measured on
sqlite3-amalgamation (http://sqlite.org/download.html) targeting
AArch64 (cross-compile on x86).
Reviewers: qcolombet, dsanders, bogner, aemerson, javed.absar
Reviewed By: qcolombet
Subscribers: rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44700
llvm-svn: 333144
This patch continues a series of patches started by r332907 (reapplied
as r332917).
In this commit we greedily stuff 2nd level GroupMatcher's common
conditions with as many predicates as possible. This is purely
post-processing and it doesn't change which rules are put into the
groups in the first place: that decision is made by looking at the
first common predicate only.
The compile time improvements are minor and well within error margin,
however, it's highly improbable that this transformation could
pessimize performance, thus I'm still committing it for potential
gains for targets not implementing GlobalISel yet and out of tree
targets.
Reviewers: qcolombet, dsanders, bogner, aemerson, javed.absar
Reviewed By: qcolombet
Subscribers: rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44700
llvm-svn: 333139
This patch continues a series of patches started by r332907 (reapplied
as r332917)
In this commit we sort type checks towards the beginning of every rule
within the MatchTable as they fail often and it's best to fail early.
This is expected to decrease time GlobalISel spends in its
InstructionSelect pass by roughly 7% for an -O0 build as measured on
sqlite3-amalgamation (http://sqlite.org/download.html) targeting
AArch64. The amalgamation is a large single-file C-source that makes
compiler backend performance improvements to stand out from frontend.
It's also a part of CTMark.
Reviewers: qcolombet, dsanders, bogner, aemerson, javed.absar
Reviewed By: qcolombet
Subscribers: rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44700
llvm-svn: 333114
This patch continues a series of patches started by r332907 (reapplied
as r332917)
In this commit we start grouping rules with common first condition on
the second level of the table.
This is expected to decrease time GlobalISel spends in its
InstructionSelect pass by roughly 13% for an -O0 build as measured on
sqlite3-amalgamation (http://sqlite.org/download.html) targeting
AArch64.
Reviewers: qcolombet, dsanders, bogner, aemerson, javed.absar
Reviewed By: qcolombet
Subscribers: rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44700
llvm-svn: 333053
This patch continues a series of patches started by r332907 (reapplied
as r332917)
In this commit we introduce a new matching opcode GIM_SwitchOpcode
that implements a jump table over opcodes and start emitting them for
root instructions.
This is expected to decrease time GlobalISel spends in its
InstructionSelect pass by roughly 20% for an -O0 build as measured on
sqlite3-amalgamation (http://sqlite.org/download.html) targeting
AArch64.
To some degree, we assume here that the opcodes form a dense set,
which is true at the moment for all upstream targets given the
limitations of our rule importing mechanism.
It might not be true for out of tree targets, specifically due to
pseudo's. If so, we might noticeably increase the size of the
MatchTable with this patch due to padding zeros. This will be
addressed later.
Reviewers: qcolombet, dsanders, bogner, aemerson, javed.absar
Reviewed By: qcolombet
Subscribers: rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44700
llvm-svn: 333017
Some ISA's such as microMIPS32(R6) have instructions which are near identical
for code generation purposes, e.g. xor and xor16. These instructions take the
same value types for operands and return values, have the same
instruction predicates and map to the same ISD opcode. (These instructions do
differ by register classes.)
In such cases, the FastISel generator rejects the instruction definition.
This patch borrows the 'FastIselShouldIgnore' bit from rL129692 and enables
applying it to an instruction definition.
Reviewers: mcrosier
Differential Revision: https://reviews.llvm.org/D46953
llvm-svn: 332983
This patch continues a series of patches that decrease time spent by
GlobalISel in its InstructionSelect pass by roughly 60% for -O0 builds
for large inputs as measured on sqlite3-amalgamation
(http://sqlite.org/download.html) targeting AArch64.
This commit specifically removes number of operands checks that are
redundant if the instruction's opcode already guarantees that number
of operands (or more), and also avoids any kind of checks on a def
operand of a nested instruction as everything about it was already
checked at its use.
The expected performance implication is about 3% off InstructionSelect
comparing to the baseline (before the series of patches)
This patch also contains a bit of NFC changes required for further
patches in the series.
Every commit planned shares the same Phabricator Review.
Reviewers: qcolombet, dsanders, bogner, aemerson, javed.absar
Reviewed By: qcolombet
Subscribers: rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44700
llvm-svn: 332945
Apparently the compile time problem was caused by the fact that not
all compilers / STL implementations can automatically convert
std::unique_ptr<Derived> to std::unique_ptr<Base>. Fixed (hopefully)
by making sure it's std::unique_ptr<Derived>&& (rvalue ref) to
std::unique_ptr<Base> conversion instead.
llvm-svn: 332917
This patch starts a series of patches that decrease time spent by
GlobalISel in its InstructionSelect pass by roughly 60% for -O0 builds
for large inputs as measured on sqlite3-amalgamation
(http://sqlite.org/download.html) targeting AArch64.
The performance improvements are achieved solely by reducing the
number of matching GIM_* opcodes executed by the MatchTable's
interpreter during the selection by approx. a factor of 30, which also
brings contribution of this particular part of the selection process
to the overall runtime of InstructionSelect pass down from approx.
60-70% to 5-7%, thus making further improvements in this particular
direction not very profitable.
The improvements described above are expected for any target that
doesn't have many complex patterns. The targets that do should
strictly benefit from the changes, but by how much exactly is hard to
estimate beforehand. It's also likely that such target WILL benefit
from further improvements to MatchTable, most likely the ones that
bring it closer to a perfect decision tree.
This commit specifically is rather large mostly NFC commit that does
necessary preparation work and refactoring, there will be a following
series of small patches introducing a specific optimization each
shortly after.
This commit specifically is expected to cause a small compile time
regression (around 2.5% of InstructionSelect pass time), which should
be fixed by the next commit of the series.
Every commit planned shares the same Phabricator Review.
Reviewers: qcolombet, dsanders, bogner, aemerson, javed.absar
Reviewed By: qcolombet
Subscribers: rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44700
llvm-svn: 332907
Summary:
Previously, a extending load was represented at (G_*EXT (G_LOAD x)).
This had a few drawbacks:
* G_LOAD had to be legal for all sizes you could extend from, even if
registers didn't naturally hold those sizes.
* All sizes you could extend from had to be allocatable just in case the
extend went missing (e.g. by optimization).
* At minimum, G_*EXT and G_TRUNC had to be legal for these sizes. As we
improve optimization of extends and truncates, this legality requirement
would spread without considerable care w.r.t when certain combines were
permitted.
* The SelectionDAG importer required some ugly and fragile pattern
rewriting to translate patterns into this style.
This patch changes the representation to:
* (G_[SZ]EXTLOAD x)
* (G_LOAD x) any-extends when MMO.getSize() * 8 < ResultTy.getSizeInBits()
which resolves these issues by allowing targets to work entirely in their
native register sizes, and by having a more direct translation from
SelectionDAG patterns.
Each extending load can be lowered by the legalizer into separate extends
and loads, however a target that supports s1 will need the any-extending
load to extend to at least s8 since LLVM does not represent memory accesses
smaller than 8 bit. The legalizer can widenScalar G_LOAD into an
any-extending load but sign/zero-extending loads need help from something
else like a combiner pass. A follow-up patch that adds combiner helpers for
for this will follow.
The new representation requires that the MMO correctly reflect the memory
access so this has been corrected in a couple tests. I've also moved the
extending loads to their own tests since they are (mostly) separate opcodes
now. Additionally, the re-write appears to have invalidated two tests from
select-with-no-legality-check.mir since the matcher table no longer contains
loads that result in s1's and they aren't legal in AArch64 anymore.
Depends on D45540
Reviewers: ab, aditya_nandakumar, bogner, rtereshin, volkan, rovka, javed.absar
Reviewed By: rtereshin
Subscribers: javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D45541
llvm-svn: 331601
The main goal is to share getMatchTable between the Instruction
Selector and the Testgen.
The commit also contains some NFC only loosely related to refactoring
out the getMatchTable, but strongly related to the initial Testgen
patch (see https://reviews.llvm.org/D43962)
Reviewers: dsanders, aemerson
Reviewed By: dsanders
Subscribers: rovka, kristof.beyls, llvm-commits, dsanders
Differential Revision: https://reviews.llvm.org/D46096
llvm-svn: 331395
An input !foreach expression such as !foreach(a, lst, !add(a, 1))
would be re-emitted by llvm-tblgen -print-records with the first
argument in quotes, giving !foreach("a", lst, !add(a, 1)), which isn't
valid TableGen input syntax.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46352
llvm-svn: 331351
Summary:
We will use this in the AMDGPU backend in a subsequent patch
in the stack to lookup target-specific per-intrinsic information.
The generic CodeGenIntrinsic machinery is used to ensure that,
even though we don't calculate actual enum values here, we do
get the intrinsics in the right order for the binary search
index.
Change-Id: If61cd5587963a4c5a1cc53df1e59c5e4dec1f9dc
Reviewers: arsenm, rampitec, b-sumner
Subscribers: wdng, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D44935
llvm-svn: 328937
Summary:
Instantiating def's and defm's needs to perform the following steps:
- for defm's, clone multiclass def prototypes and subsitute template args
- for def's and defm's, add subclass definitions, substituting template
args
- clone the record based on foreach loops and substitute loop iteration
variables
- override record variables based on the global 'let' stack
- resolve the record name (this should be simple, but unfortunately it's
not due to existing .td files relying on rather silly implementation
details)
- for def(m)s in multiclasses, add the unresolved record as a multiclass
prototype
- for top-level def(m)s, resolve all internal variable references and add
them to the record keeper and any active defsets
This change streamlines how we go through these steps, by having both
def's and defm's feed into a single addDef() method that handles foreach,
final resolve, and routing the record to the right place.
This happens to make foreach inside of multiclasses work, as the new
test case demonstrates. Previously, foreach inside multiclasses was not
forbidden by the parser, but it was de facto broken.
Another side effect is that the order of "instantiated from" notes in error
messages is reversed, as the modified test case shows. This is arguably
clearer, since the initial error message ends up pointing directly to
whatever triggered the error, and subsequent notes will point to increasingly
outer layers of multiclasses. This is consistent with how C++ compilers
report nested #includes and nested template instantiations.
Change-Id: Ica146d0db2bc133dd7ed88054371becf24320447
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D44478
llvm-svn: 328117
Summary:
Otherwise, patterns like in the test case produce cryptic error
messages about fields being resolved incompletely.
Change-Id: I713c0191f00fe140ad698675803ab1f8823dc5bd
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D44476
llvm-svn: 327850
Summary:
The docs already claim that this happens, but so far it hasn't. As a
consequence, existing TableGen files get this wrong a lot, but luckily
the fixes are all reasonably straightforward.
To make this work with all the existing forms of self-references (since
the true type of a record is only built up over time), the lookup of
self-references in !cast is delayed until the final resolving step.
Change-Id: If5923a72a252ba2fbc81a889d59775df0ef31164
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D44475
llvm-svn: 327849
Summary:
These are cases of self-references that exist today in practice. Let's
add tests for them to avoid regressions.
The self-references in PPCInstrInfo.td can be expressed in a simpler
way. Allowing this type of self-reference while at the same time
consistently doing late-resolve even for self-references is problematic
because there are references to fields that aren't in any class. Since
there's no need for this type of self-reference anyway, let's just
remove it.
Change-Id: I914e0b3e1ae7adae33855fac409b536879bc3f62
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: nemanjai, wdng, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D44474
llvm-svn: 327848
Summary:
Cast-from-string for records isn't going away, but cast-from-string for
variables is a pretty dodgy feature to have, especially when referencing
template arguments. It's doubtful that this ever worked in a reliable
way, and nobody seems to be using it, so let's get rid of it and get
some related cleanups.
Change-Id: I395ac8a43fef4cf98e611f2f552300d21e99b66a
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D44195
llvm-svn: 327844
Additionally, allow more than two operands to !con, !add, !and, !or
in the same way as is already allowed for !listconcat and !strconcat.
Change-Id: I9659411f554201b90cd8ed7c7e004d381a66fa93
Differential revision: https://reviews.llvm.org/D44112
llvm-svn: 327494
This makes using !dag more convenient in some cases.
Change-Id: I0a8c35e15ccd1ecec778fd1c8d64eee38d74517c
Differential revision: https://reviews.llvm.org/D44111
llvm-svn: 327493
This allows constructing DAG nodes with programmatically determined
names, and can simplify constructing DAG nodes in other cases as
well.
Also, add documentation and some very simple tests for the already
existing !con.
Change-Id: Ida61cd82e99752548d7109ce8da34d29da56a5f7
Differential revision: https://reviews.llvm.org/D44110
llvm-svn: 327492
Allows capturing a list of concrete instantiated defs.
This can be combined with foreach to create parallel sets of def
instantiations with less repetition in the source. This purpose is
largely also served by multiclasses, but in some cases multiclasses
can't be used.
The motivating example for this change is having a large set of
intrinsics, which are generated from the IntrinsicsBackend.td file
included by Intrinsics.td, and a corresponding set of instruction
selection patterns, which are generated via the backend's .td files.
Multiclasses cannot be used to eliminate the redundancy in this case,
because a multiclass cannot span both LLVM's common .td files and
the backend .td files at the same time.
Change-Id: I879e35042dceea542a5e6776fad23c5e0e69e76b
Differential revision: https://reviews.llvm.org/D44109
llvm-svn: 327121
The changes to FieldInit are required to make field references (Def.field)
work inside a ForeachDeclaration: previously, Def.field wasn't resolved
immediately when Def was already a fully resolved DefInit.
Change-Id: I9875baec2fc5aac8c2b249e45b9cf18c65ae699b
llvm-svn: 327120
Summary:
Only instantiate anonymous records once all variable references in template
arguments have been resolved. This allows patterns like the new test case,
which in practice can appear in expressions like:
class IntrinsicTypeProfile<list<LLVMType> ty, int shift> {
list<LLVMType> types =
!listconcat(ty, [llvm_any_ty, LLVMMatchType<shift>]);
}
class FooIntrinsic<IntrinsicTypeProfile P, ...>
: Intrinsic<..., P.types, ...>;
Without this change, the anonymous LLVMMatchType instantiation would
never get resolved.
Another consequence of this change is that anonymous inline
instantiations are uniqued via the folding set of the newly introduced
VarDefInit.
Change-Id: I7a7041a20e297cf98c9109b28d85e64e176c932a
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43756
llvm-svn: 326788
Summary:
There are various places where resolving and constant folds can
get stuck, especially around casts. We don't always signal an
error for those, because in many cases they can legitimately
occur without being an error in the "untaken branch" of an !if.
Change-Id: I3befc0e4234c8e6cc61190504702918c9f29ce5c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43754
llvm-svn: 326786
Summary:
Distinguish two relationships between types: is-a and convertible-to.
For example, a bit is not an int or vice versa, but they can be
converted into each other (with range checks that you can think of
as "dynamic": unlike other type checks, those range checks do not
happen during parsing, but only once the final values have been
established).
Actually converting initializers between types is subtle: even
when values of type A can be converted to type B (e.g. int into
string), it may not be possible to do so with a concrete initializer
(e.g., a VarInit that refers to a variable of type int cannot
be immediately converted to a string).
For this reason, distinguish between getCastTo and convertInitializerTo:
the latter implements the actual conversion when appropriate, while
the former will first try to do the actual conversion and fall back
to introducing a !cast operation so that the conversion will be
delayed until variable references have been resolved.
To make the approach of adding !cast operations to work, !cast needs
to fallback to convertInitializerTo when the special string <-> record
logic does not apply.
This enables casting records to a subclass, although that new
functionality is only truly useful together with !isa, which will be
added in a later change.
The test is removed because it uses !srl on a bit sequence,
which cannot really be supported consistently, but luckily
isn't used anywhere either.
Change-Id: I98168bf52649176654ed2ec61a29bdb29970cfe7
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43753
llvm-svn: 326785
Summary:
No functional change intended. The removed code has a loop for
recursive resolving, which is superseded by the recursive
resolving done by the Resolver implementations.
Add a test case which was broken by an earlier version of this
change.
Change-Id: Ib208d037b77a8bbb725977f1388601fc984723d8
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43655
llvm-svn: 326784
Summary:
Allow RecordRecTy to represent the type "subclass of N superclasses",
where N may be zero. Furthermore, generate RecordRecTy instances only
with actual classes in the list.
Keeping track of multiple superclasses is required to resolve the type
of a list correctly in some cases. The old code relied on the incorrect
behavior of typeIsConvertibleTo, and an earlier version of this change
relied on a modified ordering of superclasses (it was committed in
r325884 and then reverted because unfortunately some of clang-tblgen's
backends depend on the ordering).
Previously, the DefInit for each Record would have a RecordRecTy of
that Record as its type. Now, all defs with the same superclasses will
share the same type.
This allows us to be more consistent about type checks involving records:
- typeIsConvertibleTo actually requires the LHS to be a subtype of the
RHS
- resolveTypes will return the least supertype of given record types in
all cases
- different record types in the two branches of an !if are handled
correctly
Add a test that used to be accepted without flagging the obvious type
error.
Change-Id: Ib366db1a4e6a079f1a0851e469b402cddae76714
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43680
llvm-svn: 326783
Summary:
Use the new resolver interface more explicitly, and avoid traversing
all the initializers multiple times.
Add a test case for a pattern that was broken by an earlier version
of this change.
An additional change is that we now remove *all* template arguments
after resolving them.
Change-Id: I86c828c8cc84c18b052dfe0f64c0d5cbf3c4e13c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43652
llvm-svn: 326706
Summary:
This changes the syntax of !foreach so that the first "parameter" is
a new syntactic variable: !foreach(x, lst, expr) will define the
variable x within the scope of expr, and evaluation of the !foreach
will substitute elements of the given list (or dag) for x in expr.
Aside from leading to a nicer syntax, this allows more complex
expressions where x is deeply nested, or even constant expressions
in which x does not occur at all.
!foreach is currently not actually used anywhere in trunk, but I
plan to use it in the AMDGPU backend. If out-of-tree targets are
using it, they can adjust to the new syntax very easily.
Change-Id: Ib966694d8ab6542279d6bc358b6f4d767945a805
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits, tpr
Differential Revision: https://reviews.llvm.org/D43651
llvm-svn: 326705
Summary:
NAME has already worked for def in a multiclass, since the (protoype)
record including its NAME variable is created before parsing the
superclasses. Since defm's do not have an associated single record,
support for NAME has to be implemented differently here.
Original test cases provided by Artem Belevich (tra)
Change-Id: I933b74f328c0ff202e7dc23a35b78f3505760cc9
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43656
llvm-svn: 326700
This reverts r325884.
Clang's TableGen has dependencies on the exact ordering of superclasses.
Revert this change fully for now to fix the build.
Change-Id: Ib297f5571cc7809f00838702ad7ab53d47335b26
llvm-svn: 325891
Summary:
Only check whether the left-hand side type is a subclass (or equal to)
the right-hand side type.
This requires a further fix in handling !if expressions and in type
resolution.
Furthermore, reverse the order of superclasses so that resolveTypes will
find a least common ancestor at least in simple cases.
Add a test that used to be accepted without flagging the obvious type
error.
Change-Id: Ib366db1a4e6a079f1a0851e469b402cddae76714
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43559
llvm-svn: 325884
Summary:
Returns the size of a list. I have found this to be rather useful in some
development for the AMDGPU backend where we could simplify our .td files
by concatenating list<LLVMType> for complex intrinsics. Doing so requires
us to compute the position argument for LLVMMatchType.
Basically, the usage is in a pattern that looks somewhat like this:
list<LLVMType> argtypes =
!listconcat(base,
[llvm_any_ty, LLVMMatchType<!size(base)>]);
Change-Id: I360a0b000fd488d18bea412228230fd93722bd2c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits, tpr
Differential Revision: https://reviews.llvm.org/D43553
llvm-svn: 325883
Summary:
Perhaps the distinction between the two should be removed entirely
in the long term, and the [{ ... }] syntax should just be a convenient
way of writing multi-line strings.
In the meantime, a lot of existing .td files are quite relaxed about
string vs. code, and this change allows switching on more consistent
type checks without breaking those.
Change-Id: If85e3e04469e41b58e2703b62ac0032d2711713c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43557
llvm-svn: 325799
Summary:
In the case of !foreach(id, input-list, transform) where the type of
input-list is list<A> and the type of transform is B, we now correctly
deduce list<B> as the type of the !foreach.
Change-Id: Ia19dd65eecc5991dd648280ba6a15f6a20fd61de
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43555
llvm-svn: 325797
Summary:
This way, it should work even with complex operands.
Change-Id: Iaccf5bbb50bd5882a0ba5d59689e4381315fb361
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43554
llvm-svn: 325796
This patch changes GlobalISelEmitter to rank patterns similar to how the
DAG does it (ie it computes a score for a pattern and adds the added
complexity to it).
This is so that the decision tree for GISelSelector remains compatible
with that of SelectionDAG.
https://reviews.llvm.org/D43270
llvm-svn: 325401
* !foreach on lists didn't evaluate operands of the RHS operator.
This made nested operators silently fail.
* A typo in the code could result in a wrong value substituted
for an operation which produced a false '!foreach requires an operator' error.
* Keep recursion over the DAG within ForeachHelper. This simplifies
things a bit as we no longer need to pass the Type around in order
to prevent recursion.
Differential Revision: https://reviews.llvm.org/D43083
llvm-svn: 324758
Without the patch !if() is only evaluated if it's used directly.
If it's passed through more than one level of class inheritance,
we end up with a reference to an anonymous record with unresolved
references to the original arguments !if may have used.
The root cause of the problem is that TernOpInit::isComplete()
was always returning false and that prevented use of the folded
value of !if() as an initializer for the record at the next level
of inheritance.
Differential Revision: https://reviews.llvm.org/D42695
llvm-svn: 323807
Summary:
Apparently, we missed on constraining register classes of VReg-operands of all the instructions
built from a destination pattern but the root (top-level) one. The issue exposed itself
while selecting G_FPTOSI for armv7: the corresponding pattern generates VTOSIZS wrapped
into COPY_TO_REGCLASS, so top-level COPY_TO_REGCLASS gets properly constrained,
while nested VTOSIZS (or rather its destination virtual register to be exact) does not.
Fixing this by issuing GIR_ConstrainSelectedInstOperands for every nested GIR_BuildMI.
https://bugs.llvm.org/show_bug.cgi?id=35965
rdar://problem/36886530
Patch by Roman Tereshin
Reviewers: dsanders, qcolombet, rovka, bogner, aditya_nandakumar, volkan
Reviewed By: dsanders, qcolombet, rovka
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42565
llvm-svn: 323692
Summary:
This patch adds CustomRenderer which renders the matched
operands to the specified instruction.
Targets can enable the matching of SDNodeXForm by adding
a definition that inherits from GICustomOperandRenderer and
GISDNodeXFormEquiv as follows.
def gi_imm8 : GICustomOperandRenderer<"renderImm8”>,
GISDNodeXFormEquiv<imm8_xform>;
Custom renderer functions should be of the form:
void render(MachineInstrBuilder &MIB, const MachineInstr &I);
Reviewers: dsanders, ab, rovka
Reviewed By: dsanders
Subscribers: kristof.beyls, javed.absar, llvm-commits, mgrang, qcolombet
Differential Revision: https://reviews.llvm.org/D42012
llvm-svn: 322582
This patch improves diagnostic for case when mapped instruction
does not contain a field listed under RowFields.
Differential Revision: https://reviews.llvm.org/D41778
llvm-svn: 322004
Allows preserving MachineMemOperands on intrinsics
through selection. For reasons I don't understand, this
is a static property of the pattern and the selector
deliberately goes out of its way to drop if not present.
Intrinsics already inherit from SDPatternOperator allowing
them to be used directly in instruction patterns. SDPatternOperator
has a list of SDNodeProperty, but you currently can't set them on
the intrinsic. Without SDNPMemOperand, when the node is selected
any memory operands are always dropped. Allowing setting this
on the intrinsics avoids needing to introduce another equivalent
target node just to have SDNPMemOperand set.
llvm-svn: 321212
NFC for currently supported targets. This resolves a problem encountered by
targets such as RISCV that reference `Subtarget` in ImmLeaf predicates.
llvm-svn: 321176
*** Context ***
Prior to this patchw, the table generated for matching instruction was
straight forward but highly inefficient.
Basically, each pattern generates its own set of self contained checks
and actions.
E.g., TableGen generated:
// First pattern
CheckNumOperand 3
CheckOpcode G_ADD
...
Build ADDrr
// Second pattern
CheckNumOperand 3
CheckOpcode G_ADD
...
Build ADDri
// Third pattern
CheckNumOperand 3
CheckOpcode G_SUB
...
Build SUBrr
*** Problem ***
Because of that generation, a *lot* of check were redundant between each
pattern and were checked every single time until we reach the pattern
that matches.
E.g., Taking the previous table, let say we are matching a G_SUB, that
means we were going to check all the rules for G_ADD before looking at
the G_SUB rule. In particular we are going to do:
check 3 operands; PASS
check G_ADD; FAIL
; Next rule
check 3 operands; PASS (but we already knew that!)
check G_ADD; FAIL (well it is still not true)
; Next rule
check 3 operands; PASS (really!!)
check G_SUB; PASS (at last :P)
*** Proposed Solution ***
This patch introduces a concept of group of rules (GroupMatcher) that
share some predicates and only get checked once for the whole group.
This patch only creates groups with one nesting level. Conceptually
there is nothing preventing us for having deeper nest level. However,
the current implementation is not smart enough to share the recording
(aka capturing) of values. That limits its ability to do more sharing.
For the given example the current patch will generate:
// First group
CheckOpcode G_ADD
// First pattern
CheckNumOperand 3
...
Build ADDrr
// Second pattern
CheckNumOperand 3
...
Build ADDri
// Second group
CheckOpcode G_SUB
// Third pattern
CheckNumOperand 3
...
Build SUBrr
But if we allowed several nesting level, it could create a sub group
for the checknumoperand 3.
(We would need to call optimizeRules on the rules within a group.)
*** Result ***
With only one level of nesting, the instruction selection pass is up
to 4x faster. For instance, one instruction now takes 500 checks,
instead of 24k! With more nesting we could get in the tens I believe.
Differential Revision: https://reviews.llvm.org/D39034
rdar://problem/34670699
llvm-svn: 321017
A number of architectures re-use the same register names (e.g. for both 32-bit
FPRs and 64-bit FPRs). They are currently unable to use the tablegen'erated
MatchRegisterName and MatchRegisterAltName, as tablegen (when built with
asserts enabled) will fail.
When the AllowDuplicateRegisterNames in AsmParser is set, duplicated register
names will be tolerated. A backend can then coerce registers to the desired
register class by (for instance) implementing validateTargetOperandClass.
At least the in-tree Sparc backend could benefit from this, as does RISC-V
(single and double precision floating point registers).
Differential Revision: https://reviews.llvm.org/D39845
llvm-svn: 320018
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
llvm-svn: 319691
GIM_CheckNonAtomic has been replaced by GIM_CheckAtomicOrdering to allow it to support a wider
range of orderings. This has then been used to import patterns using nodes such
as atomic_cmp_swap, atomic_swap, and atomic_load_*.
llvm-svn: 319232
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Allow a pattern rewriter to be installed in CodeGenDAGPatterns and use it to
correct situations where SelectionDAG and GlobalISel disagree on
representation. For example, it would rewrite:
(sextload:i32 $ptr)<<unindexedload>><<sextload>><<sextloadi16>
to:
(sext:i32 (load:i16 $ptr)<<unindexedload>>)
I'd have preferred to replace the fragments and have the expansion happen
naturally as part of PatFrag expansion but the type inferencing system can't
cope with loads of types narrower than those mentioned in register classes.
This is because the SDTCisInt's on the sext constrain both the result and
operand to the 'legal' integer types (where legal is defined as 'a register
class can contain the type') which immediately rules the narrower types out.
Several targets (those with only one legal integer type) would then go on to
crash on the SDTCisOpSmallerThanOp<> when it removes all the possible types
for the result of the extend.
Also, improve isObviouslySafeToFold() slightly to automatically return true for
neighbouring instructions. There can't be any re-ordering problems if
re-ordering isn't happenning. We'll need to improve it further to handle
sign/zero-extending loads when the extend and load aren't immediate neighbours
though.
llvm-svn: 317971
The importer will now accept nested instructions in the result pattern such as
(ADDWrr $a, (SUBWrr $b, $c)). This is only valid when the nested instruction
def's a single vreg and the parent instruction consumes a single vreg where a
nested instruction is specified. The importer will automatically create a vreg
to connect the two using the type information from the pattern. This vreg will
be constrained to the register classes given in the instruction definitions*.
* REG_SEQUENCE is explicitly rejected because of this. The definition doesn't
constrain to a register class and it therefore needs special handling.
llvm-svn: 317117
Summary:
iPTR is a pointer of subtarget-specific size to any address space. Therefore
type checks on this size derive the SizeInBits from a subtarget hook.
At this point, we can import the simplests G_LOAD rules and select load
instructions using them. Further patches will support for the predicates to
enable additional loads as well as the stores.
The previous commit failed on MSVC due to a failure to convert an
initializer_list to a std::vector. Hopefully, MSVC will accept this version.
Depends on D37457
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37458
llvm-svn: 315887
Summary:
This includes some context-sensitivity in the MVT to LLT conversion so that
pointer types are tested correctly.
FIXME: I'm not happy with the way this is done since everything is a
special-case. I've yet to find a reasonable way to implement it.
select-load.mir fails because <1 x s64> loads in tablegen get priority over s64
loads. This is fixed in the next patch and as such they should be committed
together, I've posted them separately to help with the review.
Depends on D37456
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37457
llvm-svn: 315884
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Hopefully fixed the ambiguous constructor that a large number of bots reported.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315869
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315863
Summary:
Operand variable lookups are now performed by the RuleMatcher rather than
searching the whole matcher hierarchy for a match. This revealed a wrong-code
bug that currently affects ARM and X86 where patterns that use a variable more
than once in the match pattern will be imported but won't check that the
operands are identical. This can cause the tablegen-erated matcher to
accept matches that should be rejected.
Depends on D36569
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: aemerson, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36618
llvm-svn: 315780
Summary:
There's only a tablegen testcase for IntImmLeaf and not a CodeGen one
because the relevant rules are rejected for other reasons at the moment.
On AArch64, it's because there's an SDNodeXForm attached to the operand.
On X86, it's because the rule either emits multiple instructions or has
another predicate using PatFrag which cannot easily be supported at the
same time.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36569
llvm-svn: 315761
It's rare but there are a small number of patterns like this:
(set i64:$dst, (add i64:$src1, i64:$src2))
These should be equivalent to register classes except they shouldn't check for
a specific register bank.
This doesn't occur in AArch64/ARM/X86 but does occasionally come up in other
in-tree targets such as BPF.
llvm-svn: 315226
This replaces TableGen's type inference to operate on parameterized
types instead of MVTs, and as a consequence, some interfaces have
changed:
- Uses of MVTs are replaced by ValueTypeByHwMode.
- EEVT::TypeSet is replaced by TypeSetByHwMode.
This affects the way that types and type sets are printed, and the
tests relying on that have been updated.
There are certain users of the inferred types outside of TableGen
itself, namely FastISel and GlobalISel. For those users, the way
that the types are accessed have changed. For typical scenarios,
these replacements can be used:
- TreePatternNode::getType(ResNo) -> getSimpleType(ResNo)
- TreePatternNode::hasTypeSet(ResNo) -> hasConcreteType(ResNo)
- TypeSet::isConcrete -> TypeSetByHwMode::isValueTypeByHwMode(false)
For more information, please refer to the review page.
Differential Revision: https://reviews.llvm.org/D31951
llvm-svn: 313271
This fixes 2 problems in subregister hierarchies with multiple levels
and tuples:
1) For bigger tuples computing secondary subregs would miss 2nd order
effects. In the test case a register like `S10_S11_S12_S13_S14` with D5
= S10_S11, D6 = S12_S13 we would correctly compute sub0 = D5, sub1 = D6
but would miss the fact that we could now form ssub0_ssub1_ssub2_ssub3
(aka sub0_sub1) = D5_D6. This is fixed by changing
computeSecondarySubRegs() to compute a fixpoint.
2) Fixing 1) exposed a problem where TableGen would create multiple
names for effectively the same subregister index. In the test case
the subregister index sub0 is composed from ssub0 and ssub1, and sub1 is
composed from ssub2 and ssub3. TableGen should not create both sub0_sub1
and ssub0_ssub1_ssub2_ssub3 as infered subregister indexes. This changes
the code to build a transitive closure of the subregister components
before forming new concatenated subregister indexes.
This fix was developed for an out of tree target. For the in-tree
targets the only change is in the register information computed for ARM.
There is a slight chance this fixed/improved some register coalescing
around the QQQQ/QQ register classes there but I couldn't see/provoke any
code generation differences.
Differential Revision: https://reviews.llvm.org/D36913
llvm-svn: 311914
This fixes a warning when there are zero defined predicates and also fixes an
unnoticed bug where the first predicate in the table was unusable.
llvm-svn: 311684
Summary:
This patch adds support for predicates on imm nodes but only for ImmLeaf and not
for PatLeaf or PatFrag and only where the value does not need to be transformed
before being rendered into the instruction.
The limitation on PatLeaf/PatFrag/SDNodeXForm is due to differences in the
necessary target-supplied C++ for GlobalISel.
Depends on D36085
The previous commit was reverted for breaking the build but this appears to have
been the recurring problem on the Windows bots with tablegen not being re-run
when llvm-tblgen is changed but the .td's aren't. If it re-occurs then forcing a
build with clean=True should fix it but this string should do this in advance:
Requires a clean build.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36086
llvm-svn: 311645
Summary:
This patch adds support for predicates on imm nodes but only for ImmLeaf and not for PatLeaf or PatFrag and only where the value does not need to be transformed before being rendered into the instruction.
The limitation on PatLeaf/PatFrag/SDNodeXForm is due to differences in the necessary target-supplied C++ for GlobalISel.
Depends on D36085
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36086
llvm-svn: 311546
Summary:
Generate the type table from the types used by a target rather than hard-coding
the union of types used by all targets.
Depends on D36084
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36085
llvm-svn: 311084
As expected, this failed on the windows bots but the instrumentation showed
something interesting. The ADD8ri and INC8r rules are never directly compared
on the windows machines. That implies that the issue lies in transitivity of
the Compare predicate. I believe I've already verified that but maybe I missed
something.
llvm-svn: 310922
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
The previous commit failed on the windows bots and this one is likely to fail
on those same bots. However, the added instrumentation should reveal a particular
isHigherPriorityThan() evaluation which I'm expecting to expose that
these machines are weighing priority of two rules differently from the
non-windows machines.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 310919
Two of the Windows bots are failing test\CodeGen\X86\GlobalISel\select-inc.mir
which should not have been affected by the change. Reverting while I investigate.
Also reverted r310735 because it builds on r310716.
llvm-svn: 310745
Daniel Sanders