There was an instance of a third-party archive containing multiple
_llvm symbols from different files that clashed with each other
producing duplicate symbols. Symbols under the LLVM segment
don't seem to be producing any meaningful value, so just ignore them.
Reviewed By: #lld-macho, int3
Differential Revision: https://reviews.llvm.org/D108016
In e72403f96d, we added the flag
"--no-dynamicbase" for disabling the dynamicbase flag which we set
by default. At the time, ld.bfd didn't have any corresponding
option (as ld.bfd defaulted to not setting the flag). Almost at
the same time, corresponding options were added to ld.bfd for
disabling it (while it was being enabled by default), with a
different name, "--disable-dynamicbase".
Thus add the "--disable-dynamicbase" option. Make this default
one advertised in the help listing, but keep the "--no-dynamicbase"
form as an alias. Also improve checking for the last option set
if there are multiple ones on the same command line.
Also add corresponding disable options for a lot of other flags
that we set by default, also added in ld.bfd in the same commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=514b4e191d5f46de8e142fe216e677a35fa9c4bb
Differential Revision: https://reviews.llvm.org/D107930
When enable CSPGO for ThinLTO, there are profile cfg mismatch warnings that will cause lld-link errors (with /WX)
due to source changes (e.g. `#if` code runs for profile generation but not for profile use)
To disable it we have to use an internal "/mllvm:-no-pgo-warn-mismatch" option.
In contrast clang uses option ”-Wno-backend-plugin“ to avoid such warnings and gcc has an explicit "-Wno-coverage-mismatch" option.
Add "lto-pgo-warn-mismatch" option to lld COFF/ELF to help turn on/off the profile mismatch warnings explicitly when build with ThinLTO and CSPGO.
Differential Revision: https://reviews.llvm.org/D104431
When enable CSPGO for ThinLTO, there are profile cfg mismatch warnings that will cause lld-link errors (with /WX).
To disable it we have to use an internal "/mllvm:-no-pgo-warn-mismatch" option.
In contrast clang uses option ”-Wno-backend-plugin“ to avoid such warnings and gcc has an explicit "-Wno-coverage-mismatch" option.
Add this "lto-pgo-warn-mismatch" option to lld to help turn on/off the profile mismatch warnings explicitly when build with ThinLTO and CSPGO.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D104431
Now that we have https://reviews.llvm.org/D105539 we can
use objdump -d to actually check for instruction sequences
rather than binary blobs.
This is just an example of how to do that we should followup
with a wider ranging conversion of existing tests.
Differential Revision: https://reviews.llvm.org/D106897
Clang diagnostics refer to identifier names in quotes.
This patch makes inline remarks conform to the convention.
New behavior:
```
% clang -O2 -Rpass=inline -Rpass-missed=inline -S a.c
a.c:4:25: remark: 'foo' inlined into 'bar' with (cost=-30, threshold=337) at callsite bar:0:25; [-Rpass=inline]
int bar(int a) { return foo(a); }
^
```
Reviewed By: hoy
Differential Revision: https://reviews.llvm.org/D107791
This adds thin archives to the map file test.
I noticed that we had this test-case in our downstream
testsuite but it wasn't in the upstream testing.
Differential revision: https://reviews.llvm.org/D107555
This patch enables compressed input sections on big-endian targets by
checking the target endianness and selecting an appropriate `Chdr`
structure.
Fixes PR51369
Differential Revision: https://reviews.llvm.org/D107635
See: http://45.33.8.238/macm1/15677/step_10.txt
This is a test that has `REQUIRES: x86` which means it never ran
before; I don't have a MachO environment but based on the FileCheck
output it looks like it should be sufficient to remove one CHECK line.
Copy relocation on a non-default version symbol is unsupported and can crash at
runtime. Fortunately there is a one-line fix which works for most cases:
ensure `getSymbolsAt` unconditionally returns `ss`.
If two non-default version symbols are defined at the same place and both
are copy relocated, our implementation will copy relocated them into different
addresses. The pointer inequality is very unlikely an issue. In GNU ld, copy
relocating version aliases seems to create more pointer inequality problems than
us.
(
In glibc, sys_errlist@GLIBC_2.2.5 sys_errlist@GLIBC_2.3 sys_errlist@GLIBC_2.4
are defined at the same place, but it is unlikely they are all copy relocated in
one executable. Even if so, the variables are read-only and pointer inequality
should not be a problem.
)
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107535
Currently version script patterns are ignored for .symver produced
non-default version (single @) symbols. This makes such symbols
not localizable by `local:`, e.g.
```
.symver foo3_v1,foo3@v1
.globl foo_v1
foo3_v1:
ld.lld --version-script=a.ver -shared a.o
```
This patch adds the support:
* Move `config->versionDefinitions[VER_NDX_LOCAL].patterns` to `config->versionDefinitions[versionId].localPatterns`
* Rename `config->versionDefinitions[versionId].patterns` to `config->versionDefinitions[versionId].nonLocalPatterns`
* Allow `findAllByVersion` to find non-default version symbols when `includeNonDefault` is true. (Note: `symtab` keys do not have `@@`)
* Make each pattern check both the unversioned `pat.name` and the versioned `${pat.name}@${v.name}`
* `localPatterns` can localize `${pat.name}@${v.name}`. `nonLocalPatterns` can prevent localization by assigning `verdefIndex` (before `parseSymbolVersion`).
---
If a user notices new `undefined symbol` errors with a version script containing
`local: *;`, the issue is likely due to a missing `global:` pattern.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107234
Due to an assembler design flaw (IMO), `.symver foo,foo@v1` produces two symbols `foo` and `foo@v1` if `foo` is defined.
* `v1 {};` produces both `foo` and `foo@v1`, but GNU ld only produces `foo@v1`
* `v1 { foo; };` produces both `foo@@v1` and `foo@v1`, but GNU ld only produces `foo@v1`
* `v2 { foo; };` produces both `foo@@v2` and `foo@v1`, matching GNU ld. (Tested by symver.s)
This patch implements the GNU ld behavior by reusing the symbol redirection mechanism
in D92259. The new test symver-non-default.s checks the first two cases.
Without the patch, the second case will produce `foo@v1` and `foo@@v1` which
looks weird and makes foo unnecessarily default versioned.
Note: `.symver foo,foo@v1,remove` exists but the unfortunate `foo` will not go
away anytime soon.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107235
Currently version script patterns are ignored for .symver produced
non-default version (single @) symbols. This makes such symbols
not localizable by `local:`, e.g.
```
.symver foo3_v1,foo3@v1
.globl foo_v1
foo3_v1:
ld.lld --version-script=a.ver -shared a.o
# In a.out, foo3@v1 is incorrectly exported.
```
This patch adds the support:
* Move `config->versionDefinitions[VER_NDX_LOCAL].patterns` to `config->versionDefinitions[versionId].localPatterns`
* Rename `config->versionDefinitions[versionId].patterns` to `config->versionDefinitions[versionId].nonLocalPatterns`
* Allow `findAllByVersion` to find non-default version symbols when `includeNonDefault` is true. (Note: `symtab` keys do not have `@@`)
* Make each pattern check both the unversioned `pat.name` and the versioned `${pat.name}@${v.name}`
* `localPatterns` can localize `${pat.name}@${v.name}`. `nonLocalPatterns` can prevent localization by assigning `verdefIndex` (before `parseSymbolVersion`).
---
If a user notices new `undefined symbol` errors with a version script containing
`local: *;`, the issue is likely due to a missing `global:` pattern.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107234
GNU ld doesn't support multiple SHF_TLS SHT_NOBITS output sections (it restores
the address after an SHF_TLS SHT_NOBITS section, so consecutive SHF_TLS
SHT_NOBITS sections will have conflicting address ranges).
That said, `threadBssOffset` implements limited support for consecutive SHF_TLS
SHT_NOBITS sections. (SHF_TLS SHT_PROGBITS following a SHF_TLS SHT_NOBITS can still be
incorrect.)
`.` in an output section description of an SHF_TLS SHT_NOBITS section is
incorrect. (https://lists.llvm.org/pipermail/llvm-dev/2021-July/151974.html)
This patch saves the end address of the previous tbss section in
`ctx->tbssAddr`, changes `dot` in the beginning of `assignOffset` so
that `.` evaluation will be correct.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107208
This is available in GNU ld 2.35 and can be seen as a shortcut for multiple
--export-dynamic-symbol, or a --dynamic-list variant without the symbolic intention.
In the long term, this option probably should be preferred over --dynamic-list.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D107317
This does the same fix as D107237 but for a couple more options,
converting all remaining cases of such options to accept both
forms, for consistency. This fixes building e.g. openldap, which
uses --image-base=<value>.
Differential Revision: https://reviews.llvm.org/D107253
This option is a subset of -Bsymbolic-functions. It applies to STB_GLOBAL
STT_FUNC definitions.
The address of a vague linkage function (STB_WEAK STT_FUNC, e.g. an inline
function, a template instantiation) seen by a -Bsymbolic-functions linked
shared object may be different from the address seen from outside the shared
object. Such cases are uncommon. (ELF/Mach-O programs may use
`-fvisibility-inlines-hidden` to break such pointer equality. On Windows,
correct dllexport and dllimport are needed to make pointer equality work.
Windows link.exe enables /OPT:ICF by default so different inline functions may
have the same address.)
```
// a.cc -> a.o -> a.so (-Bsymbolic-functions)
inline void f() {}
void *g() { return (void *)&f; }
// b.cc -> b.o -> exe
// The address is different!
inline void f() {}
```
-Bsymbolic-non-weak-functions is a safer (C++ conforming) subset of
-Bsymbolic-functions, which can make such programs work.
Implementations usually emit a vague linkage definition in a COMDAT group. We
could detect the group (with more code) but I feel that we should just check
STB_WEAK for simplicity. A weak definition will thus serve as an escape hatch
for rare cases when users want interposition on definitions.
GNU ld feature request: https://sourceware.org/bugzilla/show_bug.cgi?id=27871
Longer write-up: https://maskray.me/blog/2021-05-16-elf-interposition-and-bsymbolic
If Linux distributions migrate to protected non-vague-linkage external linkage
functions by default, the linker option can still be handy because it allows
rapid experiment without recompilation. Protected function addresses currently
have deep issues in GNU ld.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D102570
ld64 seems to handle common symbols in bitcode rather
bizarrely. They follow entirely different precedence rules from their
non-bitcode counterparts. I initially tried to emulate ld64 in D106597,
but I'm not sure the extra complexity is worth it, especially given that
common symbols are not, well, very common.
This diff accords common bitcode symbols the same precedence as regular
common symbols, just as we treat all other pairs of bitcode and
non-bitcode symbol types. The tests document ld64's behavior in detail,
just in case we want to revisit this.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D107027
This is somewhat of a repeat of D66658 but for sections in PT_TLS
segments. Although such sections don't need to be aligned such that
address and offset are congruent modulo the page size, they do need
to be congruent modulo the segment alignment, otherwise the
whole PT_TLS will be unaligned. We therefore use the normal calculation
to determine the section's address within the PT_LOAD rather than
bailing out early due to being SHT_NOBITS.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D106987
This is a similar problem to D66658, where we are too aggressive in not
aligning NOBITS sections, and the tests are based on the ones added for
that fix. If a .tbss section is first in a PT_TLS segment (i.e. there is
no .tdata section) then, although it doesn't need to be aligned such
that address and offset are congruent modulo the page size, they do need
to be congruent modulo the segment alignment, otherwise the whole PT_TLS
will be unaligned.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D106986
This matches ld64's behavior, and makes it easier to fit LLD
into existing build systems.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D107011
clang may place dynamic initializations for explicitly specialized class
template static data members in comdat.
Such in-comdat SHT_INIT_ARRAY was an abuse but we have to work around it for a while.
Change removeUnusedSyntheticSections() to actually remove empty
SyntheticSections in inputSections.
In addition to doing what removeUnusedSyntheticSections() was meant
to do, this will also make the shuffle-sections tests, which shuffles
inputSections, less sensitive to empty Synthetic Sections that
will not appear in the final image.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D106427
Change-Id: I589eaf596472161a4395fb658aea0fad73318088
The test accidentally tested something else that makes lld fail
with a different (correct-looking) error that wasn't the one the
test tries to test for. (The test case before this change makes
ld64 hang in an infinite loop.)
Leave the name section in the output when using the --strip-debug
flag. This treats it more like ELF symbol tables, as the name
section has similar uses at runtime (e.g. wasm engines understand
it and it can be used for symbolization at runtime).
Fixes https://github.com/emscripten-core/emscripten/issues/14623
Differential Revision: https://reviews.llvm.org/D106728
These symbols are somewhat interesting in that they create non-existing
segments, which as far as I know is the only way to create segments
that don't contain any sections.
Final part of part of PR50760. Like D106629, but for segments instead
of sections. I'm not aware of anything that needs this in practice.
Differential Revision: https://reviews.llvm.org/D106767
Fixes the output segment name if both -rename_section and
-rename_segment are used and the post-section-rename segment
name is the same as the pre-segment-rename segment name to
match ld64's behavior.
The motivation is that segment$start$ can create section-less segments,
and this makes a corner case in the interaction between segment$start and
-rename_segment in the upcoming segment$start patch.
Differential Revision: https://reviews.llvm.org/D106766
__heap_base was not aligned. In practice, it will often be aligned
simply because it follows the stack, but when the stack is placed at the
beginning (with the --stack-first option), the __heap_base might be
unaligned. It could even be byte-aligned.
At least wasi-libc appears to expect that __heap_base is aligned:
659ff41456/dlmalloc/src/malloc.c (L5224)
While WebAssembly itself does not appear to require any alignment for
memory accesses, it is sometimes required when sharing a pointer
externally. For example, WASI might expect alignment up to 8:
https://github.com/WebAssembly/WASI/blob/main/phases/snapshot/docs.md#-timestamp-u64
This issue got introduced with the addition of the --stack-first flag:
https://reviews.llvm.org/D46141
I suspect the lack of alignment wasn't intentional here.
Differential Revision: https://reviews.llvm.org/D106499
With this, libclang_rt.profile_osx.a can be linked, that is coverage
and PGO-instrumented builds should now work with lld.
section$start and section$end symbols can create non-existing sections.
They're also undefined symbols that are only magic if there isn't a
regular symbol with their name, which means the need to be handled
in treatUndefined() instead of just looping over all existing
sections and adding start and end symbols like the ELF port does.
To represent the actual symbols, this uses absolute symbols that
get their value updated once an output section is layed out.
segment$start and segment$end are still missing for now, but they produce a
nicer error message after this patch.
Main part of PR50760.
Differential Revision: https://reviews.llvm.org/D106629
We lacked a test for bitcode symbol precedence. We assumed that
they followed the same rules as their regular symbol counterparts, but
never had a test to verify that we were matching ld64's behavior. It
turns out that we were largely correct, though we deviate from ld64 when
there are bitcode and non-bitcode symbols of the same name. The test
added in this diff both verifies our behavior and documents the
differences.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D106596
We had a comment that claimed that defined symbols had priority
over common symbols if they occurred in the same archive. In fact, they
appear to have equal precedence. Our implementation already does this,
so I'm just updating the test comment. Also added a few other test
comments along the way for readability.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D106595
I found icf.s a bit hard to work with as it was not possible to
extend any of the functions `_a` ... `_k` to test new relocation /
referent types without modifying every single one of them. Additionally,
their one-letter names were not descriptive (though the comments
helped).
I've renamed all the functions to reflect the feature they are testing,
and shrunk them so that they contain just enough to test that one
feature.
I've also added tests for non-zero addends (via the
`_abs1a_ref_with_addend` and `_defined_ref_with_addend_1` functions).
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D106211
Absolute symbols have a nullptr isec. buildInputSectionPriorities()
would defer isec, causing crashes. Ordering absolute symbols doesn't
make sense, so just ignore them. This seems to match ld64.
Differential Revision: https://reviews.llvm.org/D106628
Ported from COFF/ELF; test is adapted from
test/COFF/thinlto-archivecollision.ll
LTO expects every bitcode file to have a unique name. If given multiple bitcode
files with the same name, it errors with "Expected at most one ThinLTO module
per bitcode file".
This change incorporates the archive name, to disambiguate members with the
same name in different archives and the offset in archive to disambiguate
members with the same name in the same archive.
Differential Revision: https://reviews.llvm.org/D106179
This generalizes D70146 (SHT_NOTE) to more reserved sections and makes our rules
more consistent. Now SHF_GROUP is more similar to SHF_LINK_ORDER.
For SHT_INIT_ARRAY/SHT_FINI_ARRAY, the rule will be closer to PE/COFF link.exe.
Previously sanitizers use llvm.global_ctors to make module_ctor a GC
root, which is considered an abuse.
https://groups.google.com/g/generic-abi/c/TpleUEkNoQI
We can squeak through on compatibility issues because compilers otherwise don't
use SHF_GROUP special sections.
In ld64, `-U section$start$FOO$bar` handles `section$start$FOO$bar`
as a regular `section$start` symbol, that is section$start processing
happens before -U processing.
Likely, nobody uses that in practice so it doesn't seem very important
to be compatible with this, but it also moves the -U handling code next
to the `-undefined dynamic_lookup` handling code, which is nice because
they do the same thing. And, in fact, this did identify a bug in a corner
case in the intersection of `-undefined dynamic_lookup` and dead-stripping
(fix for that in D106565).
Vaguely related to PR50760.
No interesting behavior change.
Differential Revision: https://reviews.llvm.org/D106566
We lost the `used` bit on the Undefined when we replaced it with a DylibSymbol
in treatUndefined().
Differential Revision: https://reviews.llvm.org/D106565
The guid of a local linkage variable has the module path encoded, so the
order between a local linkage variable and a non-local linkage variable
isn't guaranteed.
Implement pass 3 of bind opcodes from ld64 (which supports both 32-bit and 64-bit).
Pass 3 implementation condenses BIND_OPCODE_DO_BIND_ADD_ADDR_ULEB opcode
to BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED. This change is already behind an
O2 flag so it shouldn't impact current performance. I verified ld64's output with x86_64 LLD
and they were both emitting the same optimized bind opcodes (although in a slightly different
order). Tested with arm64_32 LLD and compared that with x86 LLD that the order of the bind
opcodes are the same (offset values are different which should be expected).
Reviewed By: int3, #lld-macho, MaskRay
Differential Revision: https://reviews.llvm.org/D106128
In PGO, a C++ external linkage function `foo` has a private counter
`__profc_foo` and a private `__profd_foo` in a `comdat nodeduplicate`.
A `__attribute__((weak))` function `foo` has a weak hidden counter `__profc_foo`
and a private `__profd_foo` in a `comdat nodeduplicate`.
In `ld.lld a.o b.o`, say a.o defines an external linkage `foo` and b.o
defines a weak `foo`. Currently we treat `comdat nodeduplicate` as `comdat any`,
ld.lld will incorrectly consider `b.o:__profc_foo` non-prevailing. In the worst
case when `b.o:__profd_foo` is retained and `b.o:__profc_foo` isn't, there will
be dangling reference causing an `undefined hidden symbol` error.
Add SelectionKind to `Comdat` in IRSymtab and let linkers ignore nodeduplicate comdat.
Differential Revision: https://reviews.llvm.org/D106228
This reverts commit 321b2bef09.
`for (BindIR *p = &opcodes[0]; p->opcode != BIND_OPCODE_DONE; ++p) {` has a heap-buffer-overflow with test/MachO/bind-opcodes.
Implement pass 3 of bind opcodes from ld64 (which supports both 32-bit and 64-bit).
Pass 3 implementation condenses BIND_OPCODE_DO_BIND_ADD_ADDR_ULEB opcode
to BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED. This change is already behind an
O2 flag so it shouldn't impact current performance. I verified ld64's output with x86_64 LLD
and they were both emitting the same optimized bind opcodes (although in a slightly different
order). Tested with arm64_32 LLD and compared that with x86 LLD that the order of the bind
opcodes are the same (offset values are different which should be expected).
Reviewed By: int3, #lld-macho
Differential Revision: https://reviews.llvm.org/D106128
Debug info sections need R_WASM_FUNCTION_OFFSET_I32 relocs (with FK_Data_4 fixup
kinds) to refer to functions (instead of R_WASM_TABLE_INDEX as is used in data
sections). Usually this is done in a convoluted way, with unnamed temp data
symbols which target the start of the function, in which case
WasmObjectWriter::recordRelocation converts it to use the section symbol
instead. However in some cases the function can actually be undefined; in this
case the dwarf generator uses the function symbol (a named undefined function
symbol) instead. In that case the section-symbol transform doesn't work and we
need to generate the correct reloc type a different way. In this change
WebAssemblyWasmObjectWriter::getRelocType takes the fixup section type into
account to choose the correct reloc type.
Fixes PR50408
Differential Revision: https://reviews.llvm.org/D103557
ICF previously operated only within a given OutputSection. We would
merge all CFStrings first, then merge all regular code sections in a
second phase. This worked fine since CFStrings would never reference
regular `__text` sections. However, I would like to expand ICF to merge
functions that reference unwind info. Unwind info references the LSDA
section, which can in turn reference the `__text` section, so we cannot
perform ICF in phases.
In order to have ICF operate on InputSections spanning multiple
OutputSections, we need a way to distinguish InputSections that are
destined for different OutputSections, so that we don't fold across
section boundaries. We achieve this by creating OutputSections early,
and setting `InputSection::parent` to point to them. This is what
LLD-ELF does. (This change should also make it easier to implement the
`section$start$` symbols.)
This diff also folds InputSections w/o checking their flags, which I
think is the right behavior -- if they are destined for the same
OutputSection, they will have the same flags in the output (even if
their input flags differ). I.e. the `parent` pointer check subsumes the
`flags` check. In practice this has nearly no effect (ICF did not become
any more effective on chromium_framework).
I've also updated ICF.cpp's block comment to better reflect its current
status.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D105641
In D105866, we used an intermediate container to store a list of opcodes. Here,
we use that data structure to help us perform optimization passes that would allow
a more efficient encoding of bind opcodes. Currently, the functionality mirrors the
optimization pass {1,2} done in ld64 for bind opcodes under optimization gate
to prevent slight regressions.
Reviewed By: int3, #lld-macho
Differential Revision: https://reviews.llvm.org/D105867
`clang -fuse-ld=lld -static-pie -fpie` produced executable
currently crashes and this patch makes it work.
See https://sourceware.org/bugzilla/show_bug.cgi?id=27164
and https://sourceware.org/pipermail/libc-alpha/2021-July/128810.html
While it seems unreasonable to keep csu/libc-start.c ARCH_APPLY_IREL unclear in
static-pie mode and have an unneeded diff -u =(ld.bfd --verbose) =(ld.bfd -pie
--verbose) difference, glibc folks don't want to fix their code.
I feel sad about that but this patch can remove an iffy condition for lld/ELF
as well: `needsInterpSection()`.
This adds support for the lld-only `--thinlto-cache-policy` option, as well as
implementations for ld64's `-cache_path_lto`, `-prune_interval_lto`,
`-prune_after_lto`, and `-max_relative_cache_size_lto`.
Test is adapted from lld/test/ELF/lto/cache.ll
Differential Revision: https://reviews.llvm.org/D105922
The ELF specification says "The link editor honors the common definition and
ignores the weak ones." GNU ld and our Symbol::compare follow this, but the
--fortran-common code (D86142) made a mistake on the precedence.
Fixes https://bugs.llvm.org/show_bug.cgi?id=51082
Reviewed By: peter.smith, sfertile
Differential Revision: https://reviews.llvm.org/D105945
This is a follow up to https://reviews.llvm.org/D104080, and ca3bdb57fa (diff-e64a48fabe31db213a631fdc5f2acb51bdddf3f16a8fb2928784f4c579229585). The implementation of call graph profile was changed from a black box section to relocation approach. This was done to be compatible with post processing tools like strip/objcopy, and llvm equivalent. When they are invoked on object file before the final linking step with this new approach the symbol indices correctness is preserved.
The GNU binutils tools change the REL section to RELA section, unlike llvm tools. For example when strip -S is run on the ELF object files, as an intermediate step before linking. To preserve compatibility this patch extends implementation in LLD and ELFDumper to support both REL and RELA sections for call graph profile.
Reviewed By: MaskRay, jhenderson
Differential Revision: https://reviews.llvm.org/D105217
This patch is a followup patch to https://reviews.llvm.org/D105760 which adds this relocation. This handles the relocation in lld.
The s_branch family of instruction does the following:
PC = PC + signext(simm * 4) + 4
so we we do the opposite on the target address before writing it in the instruction stream.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D105761
* Adjust strsize so llvm-objdump doesn't complain about it extending
past the end of file
* Remove symbol that was referencing a deleted section
* Adjust n_sect of the remaining `_main` symbol to point at the right
section
lld currently only references dyld_stub_binder when it's needed.
ld64 always references it when libSystem is linked.
Match ld64.
The (somewhat lame) motivation is that `nm` on a binary without any
export writes a "no symbols" warning to stderr, and this change makes
it so that every binary in practice has at least a reference to
dyld_stub_binder, which suppresses that.
Every "real" output file will reference dyld_stub_binder, so most
of the time this shouldn't make much of a difference. And if you
really don't want to have this reference for whatever reason, you
can stop passing -lSystem, like you have to for ld64 anyways.
(After linking any dylib, we dump the exported list of symbols to
a txt file with `nm` and only relink downstream deps if that txt
file changes. A nicer fix is to make lld optionally write .tbd files
with the public interface of a linked dylib and use that instead,
but for now the txt files are what we do.)
Differential Revision: https://reviews.llvm.org/D105782
This is for aesthetic reasons, I'm not aware of anything that needs
this in practice. It does have a few effects:
- `-undefined dynamic_lookup` now has an effect for dyld_stub_binder.
This matches ld64.
- `-U dyld_stub_binder` now works like you'd expect (it doesn't work in ld64).
- The error message for a missing dyld_stub_binder symbol now looks like
other undefined reference symbols, it changes from
symbol dyld_stub_binder not found (normally in libSystem.dylib). Needed to perform lazy binding.
to
error: undefined symbol: dyld_stub_binder
>>> referenced by lazy binding (normally in libSystem.dylib)
Also add test coverage for that error message.
But in practice, this should have no interesting effects since everything links
in dyld_stub_binder via libSystem anyways.
Differential Revision: https://reviews.llvm.org/D105781
Add a bit more detail to the comments, and check that the final binary
does indeed have a `__unwind_info` section (D105557 previosly regressed
this).
Also rename the test to emphasize that we are testing relocations
compact unwind, not relocations in general.
Two changess:
- Drop assertions that all symbols are in GOT
- Set allEntriesAreOmitted correctly
Related bug: 50812
Differential Revision: https://reviews.llvm.org/D105364
This to protect against non-sensical instruction sequences being assembled,
which would either cause asserts/crashes further down, or a Wasm module being output that doesn't validate.
Unlike a validator, this type checker is able to give type-errors as part of the parsing process, which makes the assembler much friendlier to be used by humans writing manual input.
Because the MC system is single pass (instructions aren't even stored in MC format, they are directly output) the type checker has to be single pass as well, which means that from now on .globaltype and .functype decls must come before their use. An extra pass is added to Codegen to collect information for this purpose, since AsmPrinter is normally single pass / streaming as well, and would otherwise generate this information on the fly.
A `-no-type-check` flag was added to llvm-mc (and any other tools that take asm input) that surpresses type errors, as a quick escape hatch for tests that were not intended to be type correct.
This is a first version of the type checker that ignores control flow, i.e. it checks that types are correct along the linear path, but not the branch path. This will still catch most errors. Branch checking could be added in the future.
Differential Revision: https://reviews.llvm.org/D104945
Since D100490 this case is diagnosed for -z rel. This commit implements
R_AARCH64_TLSDESC cases for AArch64::getImplicitAddend() and
AArch64::relocate(). However, there are probably further relocation types
that need to be handled for full support of -z rel.
Fixes https://bugs.llvm.org/show_bug.cgi?id=47009
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D100544
I found this missing case with the new --check-dynamic-relocation flag
while running the lld tests with --apply-dynamic-relocs enabled by default.
This is the same as D101452 just for RISC-V
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101454
I found this missing case with the new --check-dynamic-relocation flag
while running the lld tests with --apply-dynamic-relocs enabled by default.
This also fixes a broken CHECK in lld/test/ELF/x86-64-gotpc-relax.s:
The test wasn't using CHECK-NEXT, so it was passing despite the output
actually containing relocations. I am not sure when this changed, but I
think this behaviour is correct.
Found with D101450 + enabling --apply-dynamic-relocs by default.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101452
Fangrui Song