in all but one of the AllocatedBlocks that matched the requested permissions.
Over time this would make the performance of expressions slow down considerably.
Also added a little bit of logging that was helpful in resolving the issue.
<rdar://problem/17954438>
llvm-svn: 215239
the same parent frame, but different current frame - e.g. when
you step past a tail call exit from a function. Apply the same
"avoid-no-debug" rules to this case as for a "step-in".
<rdar://problem/16189225>
llvm-svn: 214946
Also fixed the host 32 and 64 bit arch to return "x86_64-apple-macosx" again instead of "x86_64-apple-" (unspecified OS) after recent changes.
<rdar://problem/17845078>
llvm-svn: 214223
See the following llvm change for details:
r213743 | tnorthover | 2014-07-23 05:32:47 -0700 (Wed, 23 Jul 2014) | 9 lines
AArch64: remove arm64 triple enumerator.
This change fixes build breaks on Linux and MacOSX lldb.
llvm-svn: 213755
GCC emits a warning:
warning: enumeral and non-enumeral type in conditional expression [enabled by default]
which does not seem to have a flag to control it. Simply add an explicit cast
for the boolean value.
llvm-svn: 213715
This change enables lldb-platform for Linux. In addition, it does the following:
* fixes Host::GetLLDBPath() to work on Linux/*BSD for ePathTypeSupportExecutableDir-relative paths.
* adds more logging and comments around lldb-platform startup and remote lldb-platform usage.
* refactors lldb-platform remote-* support for Darwin and Linux into PlatformPOSIX. This, in theory, is the bulk of what is needed for *BSD to make remote connections to lldb-platform as well (although I haven't tested that yet). FreeBSD can make similar changes to their Platform* as was made here for PlatformLinux to pick up the rest of the bits.
* teaches GDBRemoteCommunication to use lldb-gdbserver for non-Apple hosts.
llvm-svn: 213707
result variable and use in in "Process::LoadImage" so that,
for instance, "process load" doesn't increment the return
variable number.
llvm-svn: 213440
The problem was that we have an IOHandler thread that services the IOHandler stack. The command interepter is on the top of the stack and it receives a "expression ..." command, and it calls the IOHandlerIsComplete() callback in the command interpereter delegate which runs an expression. This causes the IOHandlerProcessSTDIO to be pushed, but since we are running the code from the IOHandler thread, it won't get run. When CTRL+C is pressed, we do deliver the interrupt to the IOHandlerProcessSTDIO::Interrupt() function, but it was always writing 'i' to the interrupt pipe, even if we weren't actively reading from the debugger input and the pipes. This fix works around the issue by directly issuing the async interrupt to the process if the process is running.
A longer term more correct fix would to be run the IOHandler thread and have it just do the determination of the input and when complete input is received, run the code that handles that input on another thread and syncronize with that other thread to detect when more input is desired. That change is too big to make right now, so this fix will tide us over until we can get there.
<rdar://problem/16556228>
llvm-svn: 213196
This value gets set to a max uint32_t value when there is no known limit; otherwise,
it is set to a value appropriate for the platform. For the moment, only
Linux, FreeBSD and NetBSD set it to 16. All other platforms set it to
the max uint32_t value.
Modifies the Process private state thread names to fit within a 16-character limit
when the max thread name length is <= 16. These guarantee that the thread names
can be distinguished within the first 16 characters. Prior to this change, those
threads had names in the final dotted name segment that were not distinguishable
within the first 16 characters.
llvm-svn: 213183
Fixes include:
- Don't say that "<arch>-apple-ios" is compatible with "<arch>-apple-macosx"
- Fixed DynamicLoaderMacOSXDYLD so specify an architecture that was converted solely from a cputype and subtype, just specify the file + UUID.
- Fixed PlatformiOSSimulator::GetSupportedArchitectureAtIndex() so it returns the correct archs
- Fixed SymbolFileDWARFDebugMap to load .o files correctly by just specifying the architecture without the vendor and OS now that "<arch>-apple-ios" is not compatible with "<arch>-apple-macosx" so we can load .o files correctly for DWARF with debug map
- Fixed the coded in TargetList::CreateTarget() so it does the right thing with an underspecified triple where just the arch is specified.
llvm-svn: 212783
This reverses out the options validators changes. We'll get these
back in once the changes to the output can be resolved.
Restores broken tests on FreeBSD, Linux, MacOSX.
Changes reverted: r212500, r212317, r212290.
llvm-svn: 212543
The purpose of the OptionValidator is to determine, based on some
arbitrary set of conditions, whether or not a command option is
valid for a given debugger state. An example of this might be
to selectively disable or enable certain command options that
don't apply to a particular platform.
This patch contains no functional change, and does not actually
make use of an OptionValidator for any purpose yet. A follow-up
patch will begin to add the logic and users of OptionValidator.
Reviewed by: Greg Clayton, Jim Ingham
Differential Revision: http://reviews.llvm.org/D4369
llvm-svn: 212290
Windows does support pipes, but they do so in a slightly different way. Added a Host layer which abstracts the use of pipes into a new Pipe class that everyone can use.
Windows benefits include:
- Being able to interrupt running processes when IO is directly hooked up
- being able to interrupt long running python scripts
- being able to interrupt anything based on ConnectionFileDescriptor
llvm-svn: 212220
off_t is a type which is used for file offsets. Even more
specifically, it is only used by a limited number of C APIs that
deal with files. Any usage of off_t where the variable is not
intended to be used with one of these APIs is a bug, by definition.
This patch corrects some easy mis-uses of off_t, generally by
converting them to lldb::offset_t, but sometimes by using other
types such as size_t, when appropriate.
The use of off_t to represent these offsets has worked fine in
practice on linux-y platforms, since we used _FILE_OFFSET_64 to
guarantee that off_t was a uint64. On Windows, however,
_FILE_OFFSET_64 is unrecognized, and off_t will always be 32-bit.
So the usage of off_t on Windows actually leads to legitimate bugs.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4358
llvm-svn: 212192
Also moves NativeRegisterContextLinux* files into the Linux directory.
These, like NativeProcessLinux, should only be built on Linux or a cross
compiler with proper headers.
llvm-svn: 212074
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Elevate ProcessInfo and ProcessLaunchInfo into their own headers.
llgs will be using ProcessLaunchInfo but doesn't need to pull in
the rest of Process.h.
This also moves a bunch of implementation details from the header
declarations into ProcessInfo.cpp and ProcessLaunchInfo.cpp.
Tested on Ubuntu 14.04 Cmake and MacOSX Xcode.
Related to https://github.com/tfiala/lldb/issues/26.
llvm-svn: 212005
Clean up this one specifically, as it has the effect of double-spacing
the list of thread stop reasons, and substantially bloats the log file
when opening a core with hundreds of threads.
There are other cases of extra newlines. Some of them do increase
readability, so avoid a general sweep for now.
llvm-svn: 211655
lldb support. I'll be doing more testing & cleanup but I wanted to
get the initial checkin done.
This adds a new SBExpressionOptions::SetLanguage API for selecting a
language of an expression.
I added adds a new SBThread::GetInfoItemByPathString for retriving
information about a thread from that thread's StructuredData.
I added a new StructuredData class for representing
key-value/array/dictionary information (e.g. JSON formatted data).
Helper functions to read JSON and create a StructuredData object,
and to print a StructuredData object in JSON format are included.
A few Cocoa / Cocoa Touch data formatters were updated by Enrico
to track changes in iOS 8 / Yosemite.
Before we query a thread's extended information, the system runtime may
provide hints to the remote debug stub that it will use to retrieve values
out of runtime structures. I added a new SystemRuntime method
AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add
key-value type data to the initial request that we send to the remote stub.
The thread-format formatter string can now retrieve values out of a thread's
extended info structured data. The default thread-format string picks up
two of these - thread.info.activity.name and thread.info.trace_messages.
I added a new "jThreadExtendedInfo" packet in debugserver; I will
add documentation to the lldb-gdb-remote.txt doc soon. It accepts
JSON formatted arguments (most importantly, "thread":threadnum) and
it returns a variety of information regarding the thread to lldb
in JSON format. This JSON return is scanned into a StructuredData
object that is associated with the thread; UI layers can query the
thread's StructuredData to see if key-values are present, and if
so, show them to the user. These key-values are likely to be
specific to different targets with some commonality among many
targets. For instance, many targets will be able to advertise the
pthread_t value for a thread.
I added an initial rough cut of "thread info" command which will print
the information about a thread from the jThreadExtendedInfo result.
I need to do more work to make this format reasonably.
Han Ming added calls into the pmenergy and pmsample libraries if
debugserver is run on Mac OS X Yosemite to get information about the
inferior's power use.
I added support to debugserver for gathering the Genealogy information
about threads, if it exists, and returning it in the jThreadExtendedInfo
JSON result.
llvm-svn: 210874
This fixes a number of trivial warnings in the Windows build. This is part of a larger effort to make the Windows build warning-free.
See http://reviews.llvm.org/D3914 for more details.
Change by Zachary Turner
llvm-svn: 209749
the SystemRuntime to check if a thread will have any problems
performing an inferior function call so the driver can skip
making that function call on that thread. Often the function
call can be executed on another thread instead.
<rdar://problem/16777874>
llvm-svn: 208732
data if it is available.
Change ProcessGDBRemote's maximum read/write packet size from a
fixed 512 byte value to asking the remote gdb stub what its maximum
is, using up to 128kbyte sizes if that's allowed, and falling back
to 512 if the remote gdb stub doesn't advertise a max packet size.
Add a new "process plugin packet xfer-size" command that can be used
to override the maximum packet size (although not exceeding any packet
size maximum published by the remote gdb stub).
<rdar://problem/16032150>
llvm-svn: 208058
Add a callback that will allow an expression to be cancelled between the
expression evaluation stages (for the ClangUserExpressions.)
<rdar://problem/16790467>, <rdar://problem/16573440>
llvm-svn: 207944
- CTRL+C wasn't clearing the command in lldb
- CTRL+C doesn't work in python macros in lldb
- Ctrl+C no longer interrupts the running process that you attach to
<rdar://problem/15949205>
<rdar://problem/16778652>
<rdar://problem/16774411>
llvm-svn: 207816
but by the time we go to halt, it has already stopped by hitting the
function end breakpoint. That wasn't being shown to the threads so the
Function call thread plan didn't know its job was done.
<rdar://problem/16515785>
llvm-svn: 205803
SBTarget::AddModule(const char *path,
const char *triple,
const char *uuid_cstr,
const char *symfile);
If "symfile" was filled in, it would cause us to not correctly add the module. Same goes for:
SBTarget::AddModule(SBModuleSpec ...)
Where you filled in the symfile.
<rdar://problem/16529799>
llvm-svn: 205750
This is a purely mechanical change explicitly casting any parameters for printf
style conversion. This cleans up the warnings emitted by gcc 4.8 on Linux.
llvm-svn: 205607
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
(lldb) b puts
(lldb) expr -g -i0 -- (int)puts("hello")
First we will stop at the entry point of the expression before it runs, then we can step over a few times and hit the breakpoint in "puts", then we can continue and finishing stepping and fininsh the expression.
Main features:
- New ObjectFileJIT class that can be easily created for JIT functions
- debug info can now be enabled when parsing expressions
- source for any function that is run throught the JIT is now saved in LLDB process specific temp directory and cleaned up on exit
- "expr -g --" allows you to single step through your expression function with source code
<rdar://problem/16382881>
llvm-svn: 204682
This is a mechanical cleanup of unused functions. In the case where the
functions are referenced (in comment form), I've simply commented out the
functions. A second pass to clean that up is warranted.
The functions which are otherwise unused have been removed. Some of these were
introduced in the initial commit and not in use prior to that point!
NFC
llvm-svn: 204310
for customizing "step-in" behavior (e.g. step-in doesn't step into code with no debug info), but also
the behavior of step-in/step-out and step-over when they step out of the frame they started in.
I also added as a proof of concept of this reworking a mode for stepping where stepping out of a frame
into a frame with no debug information will continue stepping out till it arrives at a frame that does
have debug information. This is useful when you are debugging callback based code where the callbacks
are separated from the code that initiated them by some library glue you don't care about, among other
things.
llvm-svn: 203747
Seed the QueueItem objects with the item_refs and addresses when they are fetched
in one batch. If additional information is needed from the QueueItem, fetch it
lazily one pending item per function call.
<rdar://problem/16270007>, <rdar://problem/16032150>
llvm-svn: 203449
changing the data it returns; this change accepts either the old format or
the new format. It doesn't yet benefit from the new format's additions -
but I need to get this checked in so we aren't rev-locked.
Also add a missing .i entry for SBQueue::GetNumRunningItems() missing from
the last checkin.
<rdar://problem/16272115>
llvm-svn: 203421
hold a strong pointer to that extended backtrace thread in the Process
just like we do for asking a thread's extended backtrace.
Also, give extended backtrace threads an invalid ThreadIndexID number.
We'll still give them valid thread_id's. Clients who want to know the
original thread's IndexID can call GetExtendedBacktraceOriginatingIndexID().
<rdar://problem/16126034>
llvm-svn: 203088
I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion.
<rdar://problem/16111293>
llvm-svn: 202525
Also remove SetStopOthers from the ThreadPlanCallFunction, because if the value you have doesn't match what is
in the EvaluateExpressionOptions the plan was passed when created it won't work correctly.
llvm-svn: 202464
We now write a 'q' to indicate to exit the IOHandlerProcessSTDIO::Run(), and a 'i' to interrupt the process. This should make this code safer to use in a signal handler function.
llvm-svn: 202311
specify a list of functions which should be treated as trap handlers.
This will be primarily useful to people working in non-user-level
process debugging - kernels and other standalone environments.
For most people, the trap handler functions provided by the Platform
plugin will be sufficient.
<rdar://problem/15835846>, <rdar://problem/15982682>
llvm-svn: 201386
add a new pure virtual CalculateTrapHandlerSymbolNames() that Platform
subclasses must implement which fills in the function name list with any
trap handlers that are expected on that platform.
llvm-svn: 201364
aka asynchronous signal handlers, which subclasses should fill
in as appropriate. For most Unix user process environments,
the one entry in this list is _sigtramp. For bare-board and
kernel environments, there will be different sets of trap
handlers.
The unwinder needs to know when a frame is a trap handler
because the rules it enforces for the frame "above" the
trap handler is different from most middle-of-the-stack frames.
<rdar://problem/15835846>
llvm-svn: 201300
libldi library to collect extended backtrace information; switch
to the libBacktraceRecording library and its APIs. Complete the
work of adding QueueItems to Queues and allow for the QueueItems
to be interrogated about their extended backtraces in turn.
There's still cleanup and documentation to do on this code but the
code is functional and I it's a good time to get the work-in-progress
checked in.
<rdar://problem/15314027>
llvm-svn: 200822
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
This rename was suggested by gclayton as a way to silence gcc
warnings; the warning is emitted when there is an overloaded function
in a base class (Platform) for which a derived class redefines one of
the overloads but not the other (because doing so hides the other
overload from users of the derived class). By giving the two methods
different names, the situation is avoided.
llvm-svn: 199504
control to the user anyway. This was put in to handle monitors that would say there was no
stop reason when you first attached to them. But it broke the case where you hit a thread specific
breakpoint on many threads, but NOT the one specified in the breakpoint. I work around this
by only doing the junky override when the StopID is 0 - i.e. on first attach.
This commit also adds a test for thread specific breakpoints.
llvm-svn: 199290
symbols correctly. There were a couple of pieces to this.
1) When a breakpoint location finds itself pointing to an Indirect symbol, when the site for it is created
it needs to resolve the symbol and actually set the site at its target.
2) Not all breakpoints want to do this (i.e. a straight address breakpoint should always set itself on the
specified address, so somem machinery was needed to specify that.
3) I added some info to the break list output for indirect symbols so you could see what was happening.
Also I made it clear when we re-route through re-exported symbols.
4) I moved ResolveIndirectFunction from ProcessPosix to Process since it works the exact same way on Mac OS X
and the other posix systems. If we find a platform that doesn't do it this way, they can override the
call in Process.
5) Fixed one bug in RunThreadPlan, if you were trying to run a thread plan after a "running" event had
been broadcast, the event coalescing would cause you to miss the ThreadPlan running event. So I added
a way to override the coalescing.
6) Made DynamicLoaderMacOSXDYLD::GetStepThroughTrampolinePlan handle Indirect & Re-exported symbols.
<rdar://problem/15280639>
llvm-svn: 198976
While investigating test suite failures when running the test suite remotely, I noticed we had 3 copies of code that launched a process:
1 - in "process launch" command
2 - SBTarget::Launch() with args
3 - SBTarget::Launch() with SBLaunchInfo
"process launch" was launching through the platform if it was supported (this is needed for remote debugging) and the 2 and 3 were not.
Now all code is in one place.
llvm-svn: 197247
libdispatch aka Grand Central Dispatch (GCD) queues. Still fleshing out the
documentation and testing of these but the overall API is settling down so it's
a good time to check it in.
<rdar://problem/15600370>
llvm-svn: 197190
it succeeded, since the plan that was using it can figure out what to do from there.
It should only say it failed if it truely went off into the weeds.
<rdar://problem/15597807>
llvm-svn: 196631
<rdar://problem/15314403>
This patch adds a new lldb_private::SectionLoadHistory class that tracks what shared libraries were loaded given a process stop ID. This allows us to keep a history of the sections that were loaded for a time T. Many items in history objects will rely upon the process stop ID in the future.
llvm-svn: 196557
lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used.
Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number.
Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings.
llvm-svn: 196141
Added _WIN32 guards to new platform features. Using correct SetErrorStringWithFormat within Host when LLDB_DISABLE_POSIX is defined. Also fixed an if defined block.
llvm-svn: 195766
From Jim Ingham's email:
It does look like ThreadPlanStepInRange test is some kind of thinko.
In practice, in this case it is probably safe to run only one thread
when doing the "step through" since that generally involved running
from a shared library stub to its target. That could deadlock if the
dynamic loader has to fix up the symbol, and another thread is in the
middle of doing that. But that doesn't seem to be very common, or at
least the code is clearly wrong but I haven't had any reports of this
causing deadlocks...
llvm-svn: 195657
Mainly patched to stop LLDB from crashing. This can easily happen if you debug to a remote gdbserver that doesn't have any dynamic register info and you don't have a target definition file specified.
llvm-svn: 195499
Example code:
remote_platform = lldb.SBPlatform("remote-macosx");
remote_platform.SetWorkingDirectory("/private/tmp")
debugger.SetSelectedPlatform(remote_platform)
connect_options = lldb.SBPlatformConnectOptions("connect://localhost:1111");
err = remote_platform.ConnectRemote(connect_options)
if err.Success():
print >> result, 'Connected to remote platform:'
print >> result, 'hostname: %s' % (remote_platform.GetHostname())
src = lldb.SBFileSpec("/Applications/Xcode.app/Contents/SharedFrameworks/LLDB.framework", False)
dst = lldb.SBFileSpec()
# copy src to platform working directory since "dst" is empty
err = remote_platform.Install(src, dst);
if err.Success():
print >> result, '%s installed successfully' % (src)
else:
print >> result, 'error: failed to install "%s": %s' % (src, err)
Implemented many calls needed in lldb-platform to be able to install a directory that contains symlinks, file and directories.
The remote lldb-platform can now launch GDB servers on the remote system so that remote debugging can be spawned through the remote platform when connected to a remote platform.
The API in SBPlatform is subject to change and will be getting many new functions.
llvm-svn: 195273
do anything right now. Add a few new methods to the Thread base
class which HistoryThread needs. I think I updated all the
CMakeLists files correctly for the new plugin.
llvm-svn: 194756
Added two new GDB server packets to debugserver: "QSaveRegisterState" and "QRestoreRegiterState".
"QSaveRegisterState" makes the remote GDB server save all register values and it returns a save identifier as an unsigned integer. This packet can be used prior to running expressions to save all registers.
All registers can them we later restored with "QRestoreRegiterState:SAVEID" what SAVEID is the integer identifier that was returned from the call to QSaveRegisterState.
Cleaned up redundant code in lldb_private::Thread, lldb_private::ThreadPlanCallFunction.
Moved the lldb_private::Thread::RegisterCheckpoint into its own header file and it is now in the lldb_private namespace. Trimmed down the RegisterCheckpoint class to omit stuff that wasn't used (the stack ID).
Added a few new virtual methods to lldb_private::RegisterContext that allow subclasses to efficiently save/restore register states and changed the RegisterContextGDBRemote to take advantage of these new calls.
llvm-svn: 194621
something; add a new ExtendedThreadList to Process where they can be retained
for the duration of a public stop.
<rdar://problem/15314068>
llvm-svn: 194367
llvm::ArrayRef of arguments rather than taking
a fixed number of possibly-NULL pointers to
arguments.
Also changed ClangFunction::GetThreadPlanToCallFunction
to take the address of the argument struct by value
instead of by reference, since it doesn't actually
modify the value passed into it.
llvm-svn: 194232
It completes the job of using EvaluateExpressionOptions consistently throughout
the inferior function calling mechanism in lldb begun in Greg's patch r194009.
It removes a handful of alternate calls into the ClangUserExpression/ClangFunction/ThreadPlanCallFunction which
were there for convenience. Using the EvaluateExpressionOptions removes the need for them.
Using that it gets the --debug option from Greg's patch to work cleanly.
It also adds another EvaluateExpressionOption to not trap exceptions when running expressions. You shouldn't
use this option unless you KNOW your expression can't throw beyond itself. This is:
<rdar://problem/15374885>
At present this is only available through the SB API's or python.
It fixes a bug where function calls would unset the ObjC & C++ exception breakpoints without checking whether
they were set by somebody else already.
llvm-svn: 194182
Fixed the test case for "test/functionalities/exec/TestExec.py" on Darwin.
The issue was breakpoints were persisting and causing problems. When we exec, we need to clear out the process and target and start fresh with nothing and let the breakpoints populate themselves again. This patch correctly clears out the breakpoints and also flushes the process so that the objects (process/thread/frame) give out valid information.
llvm-svn: 194106
Instead of looking up registers by name, we use the generic ID when we can.
Also added code that creates an extra frame when running expressions by pushing the current PC and FP and then hooking up the FP backchain. This code is "#if 0" out for now until we can pair it with unwinder fixes.
llvm-svn: 194035
Cleaned up ClangUserExpression::Evaluate() to have only one variant that takes a "const EvaluateExpressionOptions& options" instead of taking many arguments.
The "--debug" option is designed to allow you to debug your expression by stopping at the first instruction (it enables --ignore-breakpoints=true and --unwind-on-error=false) and allowing you to step through your JIT code. It needs to be more integrated with the thread plan, so I am checking this in so Jim Ingham can make it happen.
llvm-svn: 194009
at some point in the past. We may have nothing more than a pc value
for this type of stack frame -- hopefully we'll have a pc and a
stop_id so we can track module loads and unloads over time and
symbolicate the pc at the correct point in time.
Also add a flag to indicate if the CFA for the frame is available
(a bit different from a CFA of LLDB_INVALID_ADDRESS) and also an
overall setting to indicate whether this is a history stack frame
or not. A history stack frame may not have a CFA, it may not have
a register context, it may not have variables, it may not have a
frame pointer or a stack pointer.
<rdar://problem/15314068>
llvm-svn: 193987
pure virtual base class and made StackFrame a subclass of that. As
I started to build on top of that arrangement today, I found that it
wasn't working out like I intended. Instead I'll try sticking with
the single StackFrame class -- there's too much code duplication to
make a more complicated class hierarchy sensible I think.
llvm-svn: 193983
defines a protocol that all subclasses will implement. StackFrame
is currently the only subclass and the methods that Frame vends are
nearly identical to StackFrame's old methods.
Update all callers to use Frame*/Frame& instead of pointers to
StackFrames.
This is almost entirely a mechanical change that touches a lot of
the code base so I'm committing it alone. No new functionality is
added with this patch, no new subclasses of Frame exist yet.
I'll probably need to tweak some of the separation, possibly moving
some of StackFrame's methods up in to Frame, but this is a good
starting point.
<rdar://problem/15314068>
llvm-svn: 193907
In almost all cases, the misuse is about "%lu" being used instead of the correct "%zu" (even though these are compatible on 64-bit platforms in practice). There are even a couple of cases where "%ld" (ie., signed int) is used instead of "%zu", and one where "%lu" is used instead of "%" PRIu64.
Fixes bug #17551.
Patch by "/dev/humancontroller"
llvm-svn: 193832
Jim Ingham