This was the portion split off D58632 so that it could follow the redzone API cleanup. Note that I changed the offset preferred from -8 to -64. The difference should be very minor, but I thought it might help address one concern which had been previously raised.
Differential Revision: https://reviews.llvm.org/D61862
llvm-svn: 360719
Unlike instcombine, we currently don't turn and+shift into shift+and.
We probably should, likely unconditionally.
While i'm adding only all-ones (potentially shifted) mask,
this obviously isn't limited to any particular mask pattern:
https://rise4fun.com/Alive/kmX
Related to https://bugs.llvm.org/show_bug.cgi?id=41874
llvm-svn: 360706
D61068 handled vector shifts, this patch does the same for scalars where there are similar number of pipes for shifts as bit ops - this is true almost entirely for AMD targets where the scalar ALUs are well balanced.
This combine avoids AND immediate mask which usually means we reduce encoding size.
Some tests show use of (slow, scaled) LEA instead of SHL in some cases, but thats due to particular shift immediates - shift+mask generate these just as easily.
Differential Revision: https://reviews.llvm.org/D61830
llvm-svn: 360684
This is a follow on to D58632, with the same logic. Given a memory operation which needs ordering, but doesn't need to modify any particular address, prefer to use a locked stack op over an mfence.
Differential Revision: https://reviews.llvm.org/D61863
llvm-svn: 360649
X32 can refer to a 64-bit ABI that uses 32-bit ints, longs, and pointers.
I plan to add gnux32 command lines to this test so this prepares for that.
Also remove some check lines that have a prefix that is not in any run lines.
llvm-svn: 360642
Summary:
X86TargetLowering::LowerAsmOperandForConstraint had better support than
TargetLowering::LowerAsmOperandForConstraint for arbitrary depth
getelementpointers for "i", "n", and "s" extended inline assembly
constraints. Hoist its support from the derived class into the base
class.
Link: https://github.com/ClangBuiltLinux/linux/issues/469
Reviewers: echristo, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, E5ten, kees, jyknight, nemanjai, javed.absar, eraman, hiraditya, jsji, llvm-commits, void, craig.topper, nathanchance, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61560
llvm-svn: 360604
Fixes the regression noted in D61782 where a VZEXT_MOVL was being inserted because we weren't discriminating between 'zeroable' and 'all undef' for the upper elts.
Differential Revision: https://reviews.llvm.org/D61782
llvm-svn: 360596
Now that we can use HADD/SUB for scalar additions from any pair of extracted elements (D61263), we can relax the one use limit as we will be able to merge multiple uses into using the same HADD/SUB op.
This exposes a couple of missed opportunities in LowerBuildVectorv4x32 which will be committed separately.
Differential Revision: https://reviews.llvm.org/D61782
llvm-svn: 360594
We catch most of these patterns (on x86 at least) by matching
a concat vectors opcode early in combining, but the pattern may
emerge later using insert subvector instead.
The AVX1 diffs for add/sub overflow show another missed narrowing
pattern. That one may be falling though the cracks because of
combine ordering and multiple uses.
llvm-svn: 360585
The new fptrunc and fpext intrinsics are constrained versions of the
regular fptrunc and fpext instructions.
Reviewed by: Andrew Kaylor, Craig Topper, Cameron McInally, Conner Abbot
Approved by: Craig Topper
Differential Revision: https://reviews.llvm.org/D55897
llvm-svn: 360581
Summary:
When we know for sure whether two addresses do or do not alias, we
should immediately return from DAGCombiner::isAlias().
I think this comes from a bad copy/paste, Sorry for not catching that during the
code review.
Fixes PR41855.
Reviewers: niravd, gchatelet, EricWF
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61846
llvm-svn: 360566
I've included a new fix in X86RegisterInfo to prevent PR41619 without
reintroducing r359392. We might be able to improve that in the base class
implementation of shouldRewriteCopySrc somehow. But this hopefully enables
forward progress on SimplifyDemandedBits improvements for now.
Original commit message:
This patch adds support for BigBitWidth -> SmallBitWidth bitcasts, splitting the DemandedBits/Elts accordingly.
The AMDGPU backend needed an extra (srl (and x, c1 << c2), c2) -> (and (srl(x, c2), c1) combine to encourage BFE creation, I investigated putting this in DAGComb
but it caused a lot of noise on other targets - some improvements, some regressions.
The X86 changes are all definite wins.
llvm-svn: 360552
I noticed that we were failing to narrow an x86 ymm math op in a case similar
to the 'madd' test diff. That is because a bitcast is sitting between the math
and the extract subvector and thwarting our pattern matching for narrowing:
t56: v8i32 = add t59, t58
t68: v4i64 = bitcast t56
t73: v2i64 = extract_subvector t68, Constant:i64<2>
t96: v4i32 = bitcast t73
There are a few wins and neutral diffs in the other tests.
Differential Revision: https://reviews.llvm.org/D61806
llvm-svn: 360541
See if we can simplify the demanded vector elts from the extraction before trying to simplify the demanded bits.
This helps us with target shuffles and hops in particular.
llvm-svn: 360535
Summary: Skip over prefetches when assigning debug info to instructions with memory operands. This way, the debug info is stable after instrumenting a binary with prefetches, allowing for iterative profiling and instrumentation.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61789
llvm-svn: 360471
Split out from D61692 per RKSimon's suggestion. Vector op
legalization will automatically recursively legalize the returned
SDValue, but we need to take care of the other results ourselves.
Otherwise it will end up getting legalized only during op
legalization, by which point it might be too late (though I'm not
aware of any specific cases right now).
There are codegen differences because expansion occurs earlier now
and we don't get a DAGCombiner run in between.
Differential Revision: https://reviews.llvm.org/D61744
llvm-svn: 360470
Fixes https://bugs.llvm.org/show_bug.cgi?id=40969
The functions findPotentiallyBlockedCopies and buildCopy are currently not
accounting for the presence of debug instructions. In the former this results
in the optimization not being trigerred, and in the latter results in
inconsistent codegen.
This patch enables the optimization to be performed in a debug build and
ensures the codegen is consistent with non-debug builds.
Patch by Chris Dawson.
Differential Revision: https://reviews.llvm.org/D61680
llvm-svn: 360436
If we only use the lower xmm of a ymm hop, then extract the xmm's (for free), perform the xmm hop and then insert back into a ymm (for free).
Fixes some of the regressions noted in D61782
llvm-svn: 360435
The current lowering uses an mfence. mfences are substaintially higher latency than the locked operations originally requested, but we do want to avoid contention on the original cache line. As such, use a locked instruction on a cache line assumed to be thread local.
Differential Revision: https://reviews.llvm.org/D58632
llvm-svn: 360393
As reported on PR39920, "slow horizontal ops" targets tend to internally expand to 2*shuffle+add/sub - so if we can reduce 2*shuffle+add/sub to a hadd/sub then we should do it - similar port usage but reduced instruction count.
This works out in most cases, although the "PR22377" regression in vector-shuffle-combining.ll is annoying - going from 2*shuffle+add+shuffle to hadd+2*shuffle - I've opened PR41813 to cover this.
Differential Revision: https://reviews.llvm.org/D61308
llvm-svn: 360360
This is extracted from the original draft of D61419 with some additional tests.
We don't currently get this in IR (it's conservatively turned into a NaN),
but presumably that'll get updated as we add real IR support for 'fneg'
rather than 'fsub -0.0, x'.
The x86-32 run shows the following, and I haven't looked further to see why,
but that seems to be independent:
Legalizing: t1: f32 = undef
Trying to expand node
Creating fp constant: t4: f32 = ConstantFP<0.000000e+00>
Differential Revision: https://reviews.llvm.org/D61516
llvm-svn: 360296
When assigning the definitions of an instruction we were updating
the available registers while walking the definitions. Some of
those definitions may be from physical registers and thus, they are
not available for other definitions to take, but by the time we see
that we may have already assign these registers to another
virtual register.
Fix that by walking through all the definitions and mark as unavailable
the physical register definitions, then do the virtual register assignments.
PR41790
llvm-svn: 360278
This patch adds support for calling selectFNeg for FNeg instructions in addition to the fsub idiom
Differential Revision: https://reviews.llvm.org/D61624
llvm-svn: 360273
Summary:
A COFF stub indirects the reference to a symbol through memory. A
.refptr.$sym global variable pointer is created to refer to $sym.
Typically mingw uses these for external global variable declarations,
but we can use them for weak function declarations as well.
Updates the dso_local classification to add a special case for
extern_weak symbols on COFF in both clang and LLVM.
Fixes PR37598
Reviewers: smeenai, mstorsjo
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D61615
llvm-svn: 360207
Basic "revectorization" combine, we can probably do more opcodes here but it can be a tricky cost-benefit depending on where the subvectors came from - but this case helps shuffle combining.
llvm-svn: 360134
Summary:
If fneg lowering for fsub -0.0, x fails we currently fall back to treating it as an fsub. This has different behavior for nans than the xor with sign bit trick we normally try to do. On X86, the xor trick for double fails fast-isel in 32-bit mode with sse2 due to 64 bit integer types not being available. With -O2 we would always use an xorpd for this case. If we use subsd, this creates an observable behavior difference between -O0 and -O2. So fall back to SelectionDAG if we can't fast-isel it, that way SelectionDAG will use the xorpd.
I believe this patch is restoring the behavior prior to r345295 from last October. This was missed then because our fast isel case in 32-bit mode aborted fast-isel earlier for another reason. But I've added new tests to cover that.
Reviewers: andrew.w.kaylor, cameron.mcinally, spatel, efriedma
Reviewed By: cameron.mcinally
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61622
llvm-svn: 360111
Summary:
When there are multiple instances of a forward decl record type, only the first one is emitted with a type index, because
the type is added to a map with a null type index. Avoid this by reordering so that forward decl types aren't added to the map.
Reviewers: rnk
Subscribers: aprantl, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61460
llvm-svn: 360101
The problem was that we were creating a CMOV64rr <TargetFrameIndex>, <TargetFrameIndex>. The entire point of a TFI is that address code is not generated, so there's no way to legalize/lower this. Instead, simply prevent it's creation.
Arguably, we shouldn't be using *Target*FrameIndices in StatepointLowering at all, but that's a much deeper change.
llvm-svn: 360090
The fneg double case is falling back to a subsd in 32-bit mode if you write a test that doesn't trigger a fast-isel abort on the return value.
The subsd lowering has different behavior with respect to nans than using an xor. This is inconsisent with what we would do in SelectionDAG
and can lead to differences between -O0 and -O2.
llvm-svn: 360088
We require d/q suffixes on the memory form of these instructions to disambiguate the memory size.
We don't require it on the register forms, but need to support parsing both with and without it.
Previously we always printed the d/q suffix on the register forms, but it's redundant and
inconsistent with gcc and objdump.
After this patch we should support the d/q for parsing, but not print it when its unneeded.
llvm-svn: 360085
It's possible to use the 'y' mmx constraint with a type narrower than 64-bits.
This patch supports this by bitcasting the mmx type to 64-bits and then
truncating to the desired type.
There are probably other missing type combinations we need to support, but this
is the case we have a bug report for.
Fixes PR41748.
Differential Revision: https://reviews.llvm.org/D61582
llvm-svn: 360069
Reverts "[X86] Remove (V)MOV64toSDrr/m and (V)MOVDI2SSrr/m. Use 128-bit result MOVD/MOVQ and COPY_TO_REGCLASS instead"
Reverts "[TargetLowering][AMDGPU][X86] Improve SimplifyDemandedBits bitcast handling"
Eric Christopher and Jorge Gorbe Moya reported some issues with these patches to me off list.
Removing the CodeGenOnly instructions has changed how fneg is handled during fast-isel with sse/sse2. We're now emitting fsub -0.0, x instead
moving to the integer domain(in a GPR), xoring the sign bit, and then moving back to xmm. This is because the fast isel table no longer
contains an entry for (f32/f64 bitcast (i32/i64)) so the target independent fneg code fails. The use of fsub changes the behavior of nan with
respect to -O2 codegen which will always use a pxor. NOTE: We still have a difference with double with -m32 since the move to GPR doesn't work
there. I'll file a separate PR for that and add test cases.
Since removing the CodeGenOnly instructions was fixing PR41619, I'm reverting r358887 which exposed that PR. Though I wouldn't be surprised
if that bug can still be hit independent of that.
This should hopefully get Google back to green. I'll work with Simon and other X86 folks to figure out how to move forward again.
llvm-svn: 360066
This is a subset of the original commit from rL359879
which was reverted because it could crash when using the 'RemovedInstructions'
structure that enables delayed deletion of dead instructions. The motivating
compile-time win does not require that change though. We should get most of
that win from this change alone.
Using/updating a dominator tree to match math overflow patterns may be very
expensive in compile-time (because of the way CGP uses a DT), so just handle
the single-block case.
See post-commit thread for rL354298 for more details:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190422/646276.html
Differential Revision: https://reviews.llvm.org/D61075
llvm-svn: 359969
Using/updating a dominator tree to match math overflow patterns may be very
expensive in compile-time (because of the way CGP uses a DT), so just handle
the single-block case.
Also, we were restarting the iterator loops when doing the overflow intrinsic
transforms by marking the dominator tree for update. That was done to prevent
iterating over a removed instruction. But we can postpone the deletion using
the existing "RemovedInsts" structure, and that means we don't need to update
the DT.
See post-commit thread for rL354298 for more details:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190422/646276.html
Differential Revision: https://reviews.llvm.org/D61075
llvm-svn: 359879
This is the second part of the commit fixing PR38917 (hoisting
partitially redundant machine instruction). Most of PRE (partitial
redundancy elimination) and CSE work is done on LLVM IR, but some of
redundancy arises during DAG legalization. Machine CSE is not enough
to deal with it. This simple PRE implementation works a little bit
intricately: it passes before CSE, looking for partitial redundancy
and transforming it to fully redundancy, anticipating that the next
CSE step will eliminate this created redundancy. If CSE doesn't
eliminate this, than created instruction will remain dead and eliminated
later by Remove Dead Machine Instructions pass.
The third part of the commit is supposed to refactor MachineCSE,
to make it more clear and to merge MachinePRE with MachineCSE,
so one need no rely on further Remove Dead pass to clear instrs
not eliminated by CSE.
First step: https://reviews.llvm.org/D54839
Fixes llvm.org/PR38917
Reviewers: RKSimon
Subscribers: hfinkel, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D56772
llvm-svn: 359870
The default impementation in the base class for TargetLowering::getRegForInlineAsmConstraint doesn't work for mask registers when the VT is a scalar type integer types since the only legal mask types are vXi1. So we end up just getting whatever the first register class that contains the register. Currently this appears to be VK1, but its really dependent on the order tablegen outputs the register classes.
Some code in the caller ends up looking up the type for this register class and find v1i1 then generates a copyfromreg from the physical k-register with the v1i1 type. Then it generates an any_extend from v1i1 to the scalar VT which isn't legal. This bad any_extend sticks around until isel where it selects a MOVZX32rr8 with a v1i1 input or maybe a i8 input. Not sure but eventually we pick up a copy from VK1 to GR8 in MachineIR which isn't supported. This leads to a failure in physical register copying.
This patch uses the scalar type to find a VK class of the right size. In the attached test case this will be VK16. This causes a bitcast from vk16 to i16 to be generated instead of an any_extend. This will be properly iseled to a VK16 to GR32 copy and a GR32->GR16 extract_subreg.
Fixes PR41678
Differential Revision: https://reviews.llvm.org/D61453
llvm-svn: 359837
The original patch was committed at rL359398 and reverted at rL359695 because of
infinite looping.
This includes a fix to check for a vector splat of "1.0" to avoid the infinite loop.
Original commit message:
This was originally part of D61028, but it's an independent diff.
If we try the repeated divisor reciprocal transform before producing an estimate sequence,
then we have an opportunity to use scalar fdiv. On x86, the trade-off is 1 divss vs. 5
vector FP ops in the default estimate sequence. On recent chips (Skylake, Ryzen), the
full-precision division is only 3 cycle throughput, so that's probably the better perf
default option and avoids problems from x86's inaccurate estimates.
The last 2 tests show that users still have the option to override the defaults by using
the function attributes for reciprocal estimates, but those patterns are potentially made
faster by converting the vector ops (including ymm ops) to scalar math.
Differential Revision: https://reviews.llvm.org/D61149
llvm-svn: 359793
Limiting scalar hadd/hsub generation to the lowest xmm looks to be unnecessary - we will be extracting one upper xmm whatever, and we can remove a shuffle by using the hop which is inline with what shouldUseHorizontalOp expects to happen anyway.
Testing on btver2 (the main target for fast-hops) shows this is beneficial even for float ops where we have a 'shuffle' to extract the float result:
https://godbolt.org/z/0R-U-K
Differential Revision: https://reviews.llvm.org/D61426
llvm-svn: 359786
We already perform horizontal add/sub if we extract from elements 0 and 1, this patch extends it to non-0/1 element extraction indices (as long as they are from the lowest 128-bit vector).
Differential Revision: https://reviews.llvm.org/D61263
llvm-svn: 359707
This is an alternative to D59669 which more aggressively extracts i1 elements from vXi1 bool vectors using a MOVMSK.
Differential Revision: https://reviews.llvm.org/D61189
llvm-svn: 359666
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
The reordering can leave at least a dead TokenFactor in the graph. This cause the linearize scheduler to fail with something like the assert seen in PR22614. This is only one of many ways we can break the linearize scheduler today so I can't say for sure that any of the other failures in that bug were caused by this issue.
This takes the heavy hammer approach of just running RemoveDeadNodes unconditionally at the end of the PreprocessISelDAG. If this turns out to be a compile time hit, we can try to refine it.
Differential Revision: https://reviews.llvm.org/D61164
llvm-svn: 359582
This removes some of the class variables. Merge basic block processing into
runOnMachineFunction to keep the flags local.
Pass MachineBasicBlock around instead of an iterator. We can get the iterator in
the few places that need it. Allows a range-based outer for loop.
Separate the Atom optimization from the rest of the optimizations. This allows
fixupIncDec to create INC/DEC and still allow Atom to turn it back into LEA
when profitable by its heuristics.
I'd like to improve fixupIncDec to turn LEAs into ADD any time the base or index
register is equal to the destination register. This is profitable regardless of
the various slow flags. But again we would want Atom to be able to undo that.
Differential Revision: https://reviews.llvm.org/D60993
llvm-svn: 359581
We don't have this restriction in IR, so it should not be here
either simply out of consistency. Code that wants to handle FP
exceptions is expected to use the 'strict' variants of these
nodes.
We don't get the frem case because frem by 0.0 produces NaN (invalid),
and that's the remaining check here (so the removed check for frem
was dead code AFAIK).
This is the only place in SDAG that uses "HasFPExceptions", so I
think we should remove that entirely as a follow-up patch.
llvm-svn: 359566
Current LLVM uses pxor+pinsrb on SSE4+ for INSERT_VECTOR_ELT(ZeroVec, 0, Elt) insead of much simpler movd.
INSERT_VECTOR_ELT(ZeroVec, 0, Elt) is idiomatic construct which is used e.g. for _mm_cvtsi32_si128(Elt) and for lowest element initialization in _mm_set_epi32.
So such inefficient lowering leads to significant performance digradations in ceratin cases switching from SSSE3 to SSE4.
https://bugs.llvm.org/show_bug.cgi?id=41512
Here INSERT_VECTOR_ELT(ZeroVec, 0, Elt) is simply converted to SCALAR_TO_VECTOR(Elt) when applicable since latter is closer match to desired behavior and always efficiently lowered to movd and alike.
Committed on behalf of @Serge_Preis (Serge Preis)
Differential Revision: https://reviews.llvm.org/D60852
llvm-svn: 359545
The PrologEpilogInserter need to insert a DW_OP_deref_size before
prepending a memory location expression to an already implicit
expression to avoid having the existing expression act on the memory
address instead of the value behind it.
The reason for using DW_OP_deref_size and not plain DW_OP_deref is that
big-endian targets need to read the right size as simply truncating a
larger read would yield the wrong result (LSB bytes are not at the lower
address).
This re-commit fixes issues reported in the first one. Namely deref was
inserted under wrong conditions and additionally the deref_size argument
was incorrectly encoded.
Differential Revision: https://reviews.llvm.org/D59687
llvm-svn: 359535
This is necessary since SVN r330706, as tail merging can include
CFI instructions since then.
This fixes PR40322 and PR40012.
Differential Revision: https://reviews.llvm.org/D61252
llvm-svn: 359496
Add target shuffle decoding to isHorizontalBinOp as well as ISD::VECTOR_SHUFFLE support.
This does mean we can go through bitcasts so we need to bitcast the extracted args to ensure they are the correct type
Fixes PR39936 and should help with PR39920/PR39921
Differential Revision: https://reviews.llvm.org/D61245
llvm-svn: 359491
Summary:
Extract the logic for doing reassociations
from DAGCombiner::reassociateOps into a helper
function DAGCombiner::reassociateOpsCommutative,
and use that helper to trigger reassociation
on the original operand order, or the commuted
operand order.
Codegen is not identical since the operand order will
be different when doing the reassociations for the
commuted case. That causes some unfortunate churn in
some test cases. Apart from that this should be NFC.
Reviewers: spatel, craig.topper, tstellar
Reviewed By: spatel
Subscribers: dmgreen, dschuff, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61199
llvm-svn: 359476
Some of the combines might be further improved if we lower more shuffles with X86ISD::VPERMV3 directly, instead of waiting to combine the results.
llvm-svn: 359400
This was originally part of D61028, but it's an independent diff.
If we try the repeated divisor reciprocal transform before producing an estimate sequence,
then we have an opportunity to use scalar fdiv. On x86, the trade-off is 1 divss vs. 5
vector FP ops in the default estimate sequence. On recent chips (Skylake, Ryzen), the
full-precision division is only 3 cycle throughput, so that's probably the better perf
default option and avoids problems from x86's inaccurate estimates.
The last 2 tests show that users still have the option to override the defaults by using
the function attributes for reciprocal estimates, but those patterns are potentially made
faster by converting the vector ops (including ymm ops) to scalar math.
Differential Revision: https://reviews.llvm.org/D61149
llvm-svn: 359398
An xor reduction of a bool vector can be optimized to a parity check of the MOVMSK/BITCAST'd integer - if the population count is odd return 1, else return 0.
Differential Revision: https://reviews.llvm.org/D61230
llvm-svn: 359396
Summary:
The register form of these instructions are CodeGenOnly instructions that cover
GR32->FR32 and GR64->FR64 bitcasts. There is a similar set of instructions for
the opposite bitcast. Due to the patterns using bitcasts these instructions get
marked as "bitcast" machine instructions as well. The peephole pass is able to
look through these as well as other copies to try to avoid register bank copies.
Because FR32/FR64/VR128 are all coalescable to each other we can end up in a
situation where a GR32->FR32->VR128->FR64->GR64 sequence can be reduced to
GR32->GR64 which the copyPhysReg code can't handle.
To prevent this, this patch removes one set of the 'bitcast' instructions. So
now we can only go GR32->VR128->FR32 or GR64->VR128->FR64. The instruction that
converts from GR32/GR64->VR128 has no special significance to the peephole pass
and won't be looked through.
I guess the other option would be to add support to copyPhysReg to just promote
the GR32->GR64 to a GR64->GR64 copy. The upper bits were basically undefined
anyway. But removing the CodeGenOnly instruction in favor of one that won't be
optimized seemed safer.
I deleted the peephole test because it couldn't be made to work with the bitcast
instructions removed.
The load version of the instructions were unnecessary as the pattern that selects
them contains a bitcasted load which should never happen.
Fixes PR41619.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61223
llvm-svn: 359392
As predicate masks are legal on AVX512 targets, we avoid MOVMSK in these cases, but we can just bitcast the bool vector to the integer equivalent directly - avoiding expansion of the reduction to a shuffle pattern.
llvm-svn: 359386
AND/OR/XOR tests for the @llvm.experimental.vector.reduce intrinsics
AND/OR are pretty good (pre-AVX512), XOR (not so common but used for parity reduction) is still pretty bad.
llvm-svn: 359385
Fixes PR40332 in the limited case where we're selecting between a target shuffle and a zero vector.
We can extend this in the future to handle more opcodes and non-zero selections.
llvm-svn: 359378
Summary: If we have SSE2 we can use a MOVQ to store 64-bits and avoid falling back to a cmpxchg8b loop. If its a seq_cst store we need to insert an mfence after the store.
Reviewers: spatel, RKSimon, reames, jfb, efriedma
Reviewed By: RKSimon
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60546
llvm-svn: 359368
Summary:
Targets like ARM, MSP430, PPC, and SystemZ have complex behavior when
printing the address of a MachineOperand::MO_GlobalAddress. Move that
handling into a new overriden method in each base class. A virtual
method was added to the base class for handling the generic case.
Refactors a few subclasses to support the target independent %a, %c, and
%n.
The patch also contains small cleanups for AVRAsmPrinter and
SystemZAsmPrinter.
It seems that NVPTXTargetLowering is possibly missing some logic to
transform GlobalAddressSDNodes for
TargetLowering::LowerAsmOperandForConstraint to handle with "i" extended
inline assembly asm constraints.
Fixes:
- https://bugs.llvm.org/show_bug.cgi?id=41402
- https://github.com/ClangBuiltLinux/linux/issues/449
Reviewers: echristo, void
Reviewed By: void
Subscribers: void, craig.topper, jholewinski, dschuff, jyknight, dylanmckay, sdardis, nemanjai, javed.absar, sbc100, jgravelle-google, eraman, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, jrtc27, atanasyan, jsji, llvm-commits, kees, tpimh, nathanchance, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60887
llvm-svn: 359337
As detailed on PR40758, Bobcat/Jaguar can perform vector immediate shifts on the same pipes as vector ANDs with the same latency - so it doesn't make sense to replace a shl+lshr with a shift+and pair as it requires an additional mask (with the extra constant pool, loading and register pressure costs).
Differential Revision: https://reviews.llvm.org/D61068
llvm-svn: 359293
A small step towards combining shuffles across vector sizes - this recognizes when a shuffle's operands are all extracted from the same larger source and tries to combine to an unary shuffle of that source instead. Fixes one of the test cases from PR34380.
Differential Revision: https://reviews.llvm.org/D60512
llvm-svn: 359292
We had special case handling here, but it uses a scalar any_extend for the
promotion then bitcasts to the final type. This won't split up the input data
into multiple promoted elements like we need.
This patch falls back to doing the conversion through memory.
Fixes PR41594 which I believe was reflected in the bitcast-vector-bool.ll
changes. The changes to vector-half-conversions.ll are fixing a previously
unknown miscompile from this issue.
Differential Revision: https://reviews.llvm.org/D61114
llvm-svn: 359219
Truncate the movmsk scalar integer result to the equivalent scalar integer width as before but then bitcast to the requested type.
We still have the issue identified in PR41594 but D61114 should handle this.
llvm-svn: 359176
Summary:
This emits labels around heapallocsite calls and S_HEAPALLOCSITE debug
info in codeview. Currently only changes FastISel, so emitting labels still
needs to be implemented in SelectionDAG.
Reviewers: rnk
Subscribers: aprantl, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D61083
llvm-svn: 359149
If we have a vector FP division with a splatted divisor, use the existing transform
that converts 'x/y' into 'x * (1.0/y)' to allow more conversions. This can then
potentially be converted into a scalar FP division by existing combines (rL358984)
as seen in the tests here.
That can be a potentially big perf difference if scalar fdiv has better timing
(including avoiding possible frequency throttling for vector ops).
Differential Revision: https://reviews.llvm.org/D61028
llvm-svn: 359147
ReplaceAllUsesWith doesn't remove the node that was replaced. So its left around in the graph messing up use counts on other nodes.
One thing to note, is that this isn't valid if the node being deleted is the root node of an LEA match that gets rejected. In that case the node needs to stay alive because the isel table walking code would still have a reference to it that its going to try to match next. I don't think that's the case here though because the nodes being deleted here should be "and", "srl", and "zero_extend" none of which can be the root node of an LEA match.
Differential Revision: https://reviews.llvm.org/D61048
llvm-svn: 359121
If the types don't match, we can't just remove the shuffle.
There may be some other opportunity for optimization here,
but this should prevent the crashing seen in:
https://bugs.llvm.org/show_bug.cgi?id=41414
llvm-svn: 359095
* Add support for uniquing strings in the remark streamer and emitting the string table in the remarks section.
* Add parsing support for the string table in the RemarkParser.
From this remark:
```
--- !Missed
Pass: inline
Name: NoDefinition
DebugLoc: { File: 'test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c',
Line: 7, Column: 3 }
Function: printArgsNoRet
Args:
- Callee: printf
- String: ' will not be inlined into '
- Caller: printArgsNoRet
DebugLoc: { File: 'test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c',
Line: 6, Column: 0 }
- String: ' because its definition is unavailable'
...
```
to:
```
--- !Missed
Pass: 0
Name: 1
DebugLoc: { File: 3, Line: 7, Column: 3 }
Function: 2
Args:
- Callee: 4
- String: 5
- Caller: 2
DebugLoc: { File: 3, Line: 6, Column: 0 }
- String: 6
...
```
And the string table in the .remarks/__remarks section containing:
```
inline\0NoDefinition\0printArgsNoRet\0
test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c\0printf\0
will not be inlined into \0 because its definition is unavailable\0
```
This is mostly supposed to be used for testing purposes, but it gives us
a 2x reduction in the remark size, and is an incremental change for the
updates to the remarks file format.
Differential Revision: https://reviews.llvm.org/D60227
llvm-svn: 359050
The simple case of:
```
int *callee();
void *caller(void *a) {
if (a == NULL)
return callee();
return a;
}
```
would generate a regular call instead of a tail call because we don't
look through the bitcast of the call to `callee` when duplicating the
return blocks.
Differential Revision: https://reviews.llvm.org/D60837
llvm-svn: 359041
In preparation of https://reviews.llvm.org/D60837, add this test where
we don't perform a tail call because we don't look through a bitcast.
llvm-svn: 359040
Circling back to a leftover bit from PR39859:
https://bugs.llvm.org/show_bug.cgi?id=39859#c1
...we have this counter-intuitive (based on the test diffs) opportunity to use 'psubus'.
This appears to be the better perf option for both Haswell and Jaguar based on llvm-mca.
We already do this transform for the SETULT predicate, so this makes the code more
symmetrical too. If we have pminub/pminuw, we prefer those, so this should not affect
anything but pre-SSE4.1 subtargets.
$ cat before.s
movdqa -16(%rip), %xmm2 ## xmm2 = [32768,32768,32768,32768,32768,32768,32768,32768]
pxor %xmm0, %xmm2
pcmpgtw -32(%rip), %xmm2 ## xmm2 = [255,255,255,255,255,255,255,255]
pand %xmm2, %xmm0
pandn %xmm1, %xmm2
por %xmm2, %xmm0
$ cat after.s
movdqa -16(%rip), %xmm2 ## xmm2 = [256,256,256,256,256,256,256,256]
psubusw %xmm0, %xmm2
pxor %xmm3, %xmm3
pcmpeqw %xmm2, %xmm3
pand %xmm3, %xmm0
pandn %xmm1, %xmm3
por %xmm3, %xmm0
$ llvm-mca before.s -mcpu=haswell
Iterations: 100
Instructions: 600
Total Cycles: 909
Total uOps: 700
Dispatch Width: 4
uOps Per Cycle: 0.77
IPC: 0.66
Block RThroughput: 1.8
$ llvm-mca after.s -mcpu=haswell
Iterations: 100
Instructions: 700
Total Cycles: 409
Total uOps: 700
Dispatch Width: 4
uOps Per Cycle: 1.71
IPC: 1.71
Block RThroughput: 1.8
Differential Revision: https://reviews.llvm.org/D60838
llvm-svn: 358999
If we only match build vectors, we can miss some patterns
that use shuffles as seen in the affected tests.
Note that the underlying calls within getSplatSourceVector()
have the potential for compile-time explosion because of
exponential recursion looking through binop opcodes, but
currently the list of supported opcodes is very limited.
Both of those problems should be addressed in follow-up
patches.
llvm-svn: 358984
Summary:
The DAGCombiner is rewriting (canonicalizing) an ISD::ADD
with no common bits set in the operands as an ISD::OR node.
This could sometimes result in "missing out" on some
combines that normally are performed for ADD. To be more
specific this could happen if we already have rewritten an
ADD into OR, and later (after legalizations or combines)
we expose patterns that could have been optimized if we
had seen the OR as an ADD (e.g. reassociations based on ADD).
To make the DAG combiner less sensitive to if ADD or OR is
used for these "no common bits set" ADD/OR operations we
now apply most of the ADD combines also to an OR operation,
when value tracking indicates that the operands have no
common bits set.
Reviewers: spatel, RKSimon, craig.topper, kparzysz
Reviewed By: spatel
Subscribers: arsenm, rampitec, lebedev.ri, jvesely, nhaehnle, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59758
llvm-svn: 358965
This was supposed to be NFC, but the change in SDLoc
definitions causes instruction scheduling changes.
There's nothing x86-specific in this code, and it can
likely be used from DAGCombiner's simplifyVBinOp().
llvm-svn: 358930
This patch adds support for BigBitWidth -> SmallBitWidth bitcasts, splitting the DemandedBits/Elts accordingly.
The AMDGPU backend needed an extra (srl (and x, c1 << c2), c2) -> (and (srl(x, c2), c1) combine to encourage BFE creation, I investigated putting this in DAGCombine but it caused a lot of noise on other targets - some improvements, some regressions.
The X86 changes are all definite wins.
Differential Revision: https://reviews.llvm.org/D60462
llvm-svn: 358887
Philip Reames