struct iovec is used as an interface to system (posix) api's. As such,
we shouldn't be using it in os-independent code, and we shouldn't be
defining our own iovec replacements.
Fortunately, its usage was not very widespread, so the removal was very
easy -- I simply moved a couple declarations into os-specific code.
llvm-svn: 319536
but still listed in the kernel's kext table with the kernel
binary UUID. This resulted in the kernel text section being
loaded at the kext address and problems ensuing. Instead,
if there is a kext with the same UUID as the kernel, lldb
should skip over it.
<rdar://problem/35757689>
llvm-svn: 319500
1. Move TaskPool into the namespace lldb_private.
2. Add missing std::move in TaskPoolImpl::Worker.
3. std:🧵:hardware_concurrency may return 0,
handle this case correctly.
Differential revision: https://reviews.llvm.org/D40587
Test plan: make check-all
llvm-svn: 319492
Summary:
llvm::APSInt(0) asserts because it creates an int with bit-width 0 and
not (as I thought) a value 0.
Theoretically it should be sufficient to change this to APSInt(1), as
the intention there was that the value of the first argument should be
ignored if the type is invalid, but that would look dodgy.
Instead, I use llvm::Optional to denote an invalid value and use a
special struct instead of a std::pair, to reduce typing and increase
clarity.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40615
llvm-svn: 319414
It has no functionality effect.
I was concerned about the worse performance of DWARFDebugInfo::Parse this way
of allocating+destroying a CU for each iteration but I see it is now used only
by DWARFDebugInfo::Dump so that is no longer a problem.
Differential revision: https://reviews.llvm.org/D40212
llvm-svn: 319359
Summary: This remove a small amount of duplicated code.
Reviewers: clayborg, zturner, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40536
llvm-svn: 319191
In https://reviews.llvm.org/D39681, we started using a map instead
passing a long list of register sets to the ppc64le register context.
However, existing register contexts were still using the old method.
This converts the remaining register contexts to use this approach.
While doing that, I've had to modify the approach a bit:
- the general purpose register set is still kept as a separate field,
because this one is always present, and it's parsing is somewhat
different than that of other register sets.
- since the same register sets have different IDs on different operating
systems, but we use the same register context class to represent
different register sets, I've needed to add a layer of indirection to
translate os-specific constants (e.g. NETBSD::NT_AMD64_FPREGS) into more
generic terms (e.g. floating point register set).
While slightly more complicated, this setup allows for better separation
of concerns. The parsing code in ProcessElfCore can focus on parsing
OS-specific core file notes, and can completely ignore
architecture-specific register sets (by just storing any unrecognised
notes in a map). These notes will then be passed on to the
architecture-specific register context, which can just deal with
architecture specifics, because the OS-specific note types are hidden in
a register set description map.
This way, adding an register set, which is already supported on other
OSes, to a new OS, should in most cases be as simple as adding a new
entry into the register set description map.
Differential Revision: https://reviews.llvm.org/D40133
llvm-svn: 319162
Summary:
New linux kernels (on systems that support the XSAVES instruction) will
not update the inferior registers unless the corresponding flag in the
XSAVE header is set. Normally this flag will be set in our image of the
XSAVE area (since we obtained it from the kernel), but if the inferior
has never used the corresponding register set, the respective flag can
be clear.
This fixes the issue by making sure we explicitly set the flags
corresponding to the registers we modify. I don't try to precisely match
the flags to set on each write, as the rules could get quite complicated
-- I use a simpler over-approximation instead.
This was already caught by test_fp_register_write, but that was only
because the code that ran before main() did not use some of the register
sets. Since nothing in this test relies on being stopped in main(), I
modify the test to stop at the entry point instead, so we can be sure
the inferior did not have a chance to access these registers.
Reviewers: clayborg, valentinagiusti
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40434
llvm-svn: 319161
Summary:
This method doesn't modify anything in the object it's called on so we
can mark it const to make it usable in a const context.
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40517
llvm-svn: 319095
This was a temporary thing, until llvm has proper support for formatting
time. That time has come, so we can remove the relevant code. There
should be no change in the format of the time.
llvm-svn: 319048
Summary:
We've had a single function responsible for splitting a core segment
into notes, and parsing the notes themselves, bearing in mind variations
between 4 supported OS types. This commit splits that code into 5
pieces:
- (os-independent) code for splitting a segment into individual notes
- per-os function for parsing the notes into thread information
Reviewers: clayborg, krytarowski, emaste, alexandreyy, kettenis
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40311
llvm-svn: 318903
DWO/DWP should not be indexed directly.
Instead, the corresponding base file should be used.
This diff adds an assert to DWARFCompileUnit::Index
and adjusts the methods
SymbolFileDWARF::FindCompleteObjCDefinitionTypeForDIE,
SymbolFileDWARF::GetObjCMethodDIEOffsets accordingly.
Differential revision: https://reviews.llvm.org/D39825
llvm-svn: 318554
so it has the same padding as the kernel's definition
which is written in terms of uint128_t. Original patch
by Ryan Mansfield.
<rdar://problem/35468499>
llvm-svn: 318357
break. The alignas(__uint128_t) is not recognized with MSVC
it looks like. Zachary, is there a similar type on windows?
I suppose I can go with alignas(16) here but I'd prefer to
specify the type alignment that I want & let the ABI dictate
how much padding is required.
llvm-svn: 318262
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
Summary:
In D39387, I was quick to jump to conclusion that ArchSpec has no
external dependencies. It turns there still was one call to
HostInfo::GetArchitecture left -- for implementing the "systemArch32"
architecture and friends.
Since GetAugmentedArchSpec is the place we handle these "incomplete"
triples that don't specify os or vendor and "systemArch" looks very much
like an incomplete triple, I move its handling there.
After this ArchSpec *really* does not have external dependencies, and
I'll move it to the Utility module as a follow-up.
Reviewers: zturner, clayborg, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39896
llvm-svn: 318046
Summary:
Despite it's name, GetTemplateArgument was only really working for Type
template arguments. This adds the ability to retrieve integral arguments
as well (which I've needed for the std::bitset data formatter).
I've done this by splitting the function into three pieces. The idea is
that one first calls GetTemplateArgumentKind (first function) to
determine the what kind of a parameter this is. Based on that, one can
then use specialized functions to retrieve the correct value. Currently,
I only implement two of these: GetTypeTemplateArgument and
GetIntegralTemplateArgument.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39844
llvm-svn: 318040
This commit really did not introduce any functional changes (for most
people) but it turns out it's not for the reason we thought it was.
The reason wasn't that Orc is a perfect drop-in replacement for MCJIT,
but it was because we were never using Orc in the first place, as it was
not initialized.
Orc's initialization relies on a global constructor in the LLVMOrcJIT.a.
Since this archive does not expose any symbols referenced from other
object files, it does not get linked into liblldb when linking against
llvm components statically. However, in an LLVM_LINK_LLVM_DYLIB=On
build, LLVMOrcJit.a is linked into libLLVM.so using --whole-archive, so
the global constructor does end up firing.
The result of using Orc jit is pr34194, where lldb fails to evaluate
even very simple expressions. This bug can be reproduced in
non-LLVM_LINK_LLVM_DYLIB builds by making sure Orc jit is linked into
liblldb, for example by #including
llvm/ExecutionEngine/OrcMCJITReplacement.h in IRExecutionUnit.cpp (and
adding OrcJIT as a dependency to the relevant CMakeLists.txt file). The
bug reproduces (at least) on linux and osx.
The root cause of the bug seems to be related to relocation processing.
It seems Orc processes relocations earlier than the system it is
replacing. This means the relocation processing happens before we have
had a chance to remap section load addresses to reflect their address in
the target process memory, so they end up pointing to locations in the
lldb's address space instead.
I am not sure whether this is a bug in Orc jit, or in how we are using
it from lldb, but in any case it is preventing us from using Orc right
now. Reverting this fixes LLVM_LINK_LLVM_DYLIB build, and makes it clear
that we are in fact *not* using Orc, and we never really were.
This reverts commit r279327.
llvm-svn: 318039
FindCompleteObjCDefinitionType is not used anywhere and there is no implementation of it, only a declaration.
Test plan: make check-lldb
Differential revision: https://reviews.llvm.org/D39884
llvm-svn: 317919
Summary:
This commit removes the concrete_frame_idx member from
NativeRegisterContext and related functions, which was always set to
zero and never used.
I also change the native thread class to store a NativeRegisterContext
as a unique_ptr (documenting the ownership) and make sure it is always
initialized (most of the code was already blindly dereferencing the
register context pointer, assuming it would always be present -- this
makes its treatment consistent).
Reviewers: eugene, clayborg, krytarowski
Subscribers: aemerson, sdardis, nemanjai, javed.absar, arichardson, kristof.beyls, kbarton, uweigand, alexandreyy, lldb-commits
Differential Revision: https://reviews.llvm.org/D39837
llvm-svn: 317881
Summary:
These tests used to log the error message and return plain bool mainly
because at the time they we written, we did not have a nice way to
assert on llvm::Error values. That is no longer true, so replace this
pattern with a more idiomatic approach.
As a part of this patch, I also move the formatting of
GDBRemoteCommunication::PacketResult values out of the test code, as
that can be useful elsewhere.
Reviewers: zturner, eugene
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D39790
llvm-svn: 317795
Summary:
These functions used to return bool to signify whether they were able to
retrieve the data. This is redundant because the ArchSpec and ByteOrder
already have their own "invalid" states, *and* because both of the
current implementations (linux, netbsd) can always provide a valid
result.
This allows us to simplify bits of the code handling these values.
Reviewers: eugene, krytarowski
Subscribers: javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39733
llvm-svn: 317779
The thread name was not followed by a space, which meant it was glued to
the log message. I also align the name as we do that with other log
fields. I align it to 16 chars instead of llvm::max_thread_name(), as
that can be 64 on darwin, which is rather long. If anybody feels
differently about that, we can change it.
llvm-svn: 317679
Summary:
A couple of members of these data structures have been renamed in recent
months. This makes sure they still work with the latest libc++ version.
Reviewers: jingham, EricWF
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39602
llvm-svn: 317624
Summary:
Posix core files sometime don't contain enough information to correctly
detect the OS. If that is the case we should use the OS from the target
instead as it will contain usable information in more cases and if the
target and the core contain different OS-es then we are already in a
pretty bad state so moving from an unknown OS to a known (but possibly
incorrect) OS will do no harm.
We already had similar code in place for MIPS. This change tries to make
it more generic by using ArchSpec::MergeFrom and extends it to all
architectures but some MIPS specific issue prevent us from getting rid
of special casing MIPS.
Reviewers: clayborg, nitesh.jain
Subscribers: aemerson, sdardis, arichardson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D36046
llvm-svn: 317411
Summary:
macOS builds of LLDB use the bundle version from
`tools/driver/lldb-Info.plist`. That file hasn't been updated since the 4.0
release so the version we print provides no value. I also think that even if it
were up to date, that number has no meaning and displaying the version from the
LLVM tree is more valuable.
I know that Apple folks have some form of override for the clang version to
match the Xcode version, so it'd make sense for them to do the same for LLDB.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39429
llvm-svn: 317218
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D39128
<rdar://problem/34870417>
llvm-svn: 317182
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D38829
llvm-svn: 317180
Summary:
std::queue is just a fancy wrapper around another container, so all we
need to do is to delegate to the it.
Reviewers: jingham, EricWF
Subscribers: srhines, mgorny, lldb-commits, eugene
Differential Revision: https://reviews.llvm.org/D35666
llvm-svn: 317099
Summary:
It is not presently used, and it's quite dangerous to use -- it assumes the
integer is an osx kern_return_t, but very few of the integers we have lying
around are mach kernel error codes. The error can still be used to a
mach error using a slightly longer (but more explicit) syntax.
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35305
llvm-svn: 317093
Summary:
r316368 broke this build when it introduced a reference to a pthread
function to the Utility module. This caused cmake to generate an
incorrect link line (wrong order of libs) because it did not see the
dependency from Utility to the system libraries. Instead these libraries
were being manually added to each final target.
This changes moves the dependency management from the individual targets
to the lldbUtility module, which is consistent with how llvm does it.
The final targets will pick up these libraries as they will be a part of
the link interface of the module.
Technically, some of these dependencies could go into the host module,
as that's where most of the os-specific code is, but I did not try to
investigate which ones.
Reviewers: zturner, sylvestre.ledru
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D39246
llvm-svn: 316997
The previous value was not sufficient for Pixel 2 phones. One would have
hoped that the newer phones are faster, but that does not seem to be the
case here.
llvm-svn: 316993
Summary:
This adds a data formatter for the implementation of forward_list in
libc++. I've refactored the existing std::list data formatter a bit to
enable more sharing of code (mainly the loop detection stuff).
Reviewers: jingham, EricWF
Subscribers: srhines, eugene, lldb-commits
Differential Revision: https://reviews.llvm.org/D35556
llvm-svn: 316992
Summary:
ArchSpec::SetTriple was taking a Platform as an argument, and used it to
fill in missing pieces of the specified triple. I invert the dependency
by moving this code to other classes. For this purpose, I've created
three new functions.
- HostInfo::GetAugmentedArchSpec: fills in the triple using the host
platform (this used to be implemented by passing a null platform
pointer). By putting this code in the Host module, we can provide a
way to anyone who does not have a platform instance (lldb-server) an
easy way to get Host data.
- Platform::GetAugmentedArchSpec: if you have a platform instance, you
can call this to let it fill in the triple.
- static Platform::GetAugmentedArchSpec: implements the "if platform ==
0 then use_host() else use_platform()" part.
Reviewers: zturner, jingham, clayborg
Subscribers: mgorny, javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39387
llvm-svn: 316987
Versions of android before kitkat implemented pselect non-atomically,
which caused flakyness, as we were relying on it atomically setting the
signal mask to implement waiting for signals.
This patch implements a direct call to the the pselect kernel syscall,
which does not suffer from this problem. The code itself is not very
pretty, but fortunately the uglyness is contained in the
android version of the MainLoop::RunImpl::Poll function.
llvm-svn: 316915
UriParser::Parse is returning a StringRef pointing the the parsed
string, but we were calling it with a temporary string. Change this to a
local variable to make sure the string persists as long as we need it.
llvm-svn: 316740
Summary:
This matches other SysV ABIs that are different on Apple and non-Apple targets,
like `ABISysV_arm.cpp` for instance.
Reviewers: clayborg, emaste
Subscribers: aemerson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D39335
llvm-svn: 316673
This creates a new Architecture plugin and moves the stop info override
callback to this place. The motivation for this is to remove complex
dependencies from the ArchSpec class because it is used in a lot of
places that (should) know nothing about Process instances and StopInfo
objects.
I also add a test for the functionality covered by the override
callback.
Differential Revision: https://reviews.llvm.org/D31172
llvm-svn: 316609
Summary:
We had a bug where if we had forked (in the ProcessLauncherPosixFork)
while another thread was writing a log message, we would deadlock. This
happened because the fork child inherited the locked log rwmutex, which
would never get unlocked. This meant the child got stuck trying to
disable all log channels.
The bug existed for a while but only started being apparent after
D37930, which started using ThreadLauncher (which uses logging) instead
of std::thread (which does not) for launching TaskPool threads.
The fix is to use pthread_atfork to disable logging in the forked child.
Reviewers: zturner, eugene, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D38938
llvm-svn: 316368
The pthread_atfork trick breaks on android, because
pthread_rwlock_unlock detects that it is not the same thread which
locked the lock. This means that the subsequent lock attempt will still
deadlock (only this time it happens deterministically instead of at
random). Reverting to find a better solution.
This reverts commit r316173.
llvm-svn: 316231
Summary:
We had a bug where if we had forked (in the ProcessLauncherPosixFork)
while another thread was writing a log message, we would deadlock. This
happened because the fork child inherited the locked log rwmutex, which
would never get unlocked. This meant the child got stuck trying to
disable all log channels.
The bug existed for a while but only started being apparent after
D37930, which started using ThreadLauncher (which uses logging) instead
of std::thread (which does not) for launching TaskPool threads.
The fix is to use pthread_atfork to make sure noone is writing a log
message while we are forking.
Reviewers: zturner, eugene, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D38938
llvm-svn: 316173
Summary:
The NativeThread class is useless without the containing process (and in
some places it is already assuming the process is always around). This
makes it clear that the NativeProcessProtocol is the object owning the
threads, and makes the destruction order deterministic (first threads,
then process). The NativeProcess is the only thing holding a thread
unique_ptr, and methods that used to hand out thread shared pointers now
return raw pointers or references.
Reviewers: krytarowski, eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35618
llvm-svn: 316007
This patch adds support for passing an arbitrary python stream
(anything inheriting from IOBase) to SetOutputFileHandle or
SetErrorFileHandle.
Differential revision: https://reviews.llvm.org/D38829
<rdar://problem/34870417>
llvm-svn: 315966
* Prevent dumping of characters in DumpDataExtractor() with
item_byte_size bigger than 8 bytes. This case is not supported by the
code and results in a crash because the code calls
DataExtractor::GetMaxU64Bitfield() -> GetMaxU64() that asserts for
byte size > 8 bytes.
* Teach DataExtractor::GetMaxU64(), GetMaxU32(), GetMaxS64() and
GetMaxU64_unchecked() how to handle byte sizes that are not a multiple
of 2. This allows DumpDataExtractor() to dump characters and booleans
with item_byte_size in the interval of [1, 8] bytes. Values that are
not a multiple of 2 would previously result in a crash because they
were not handled by GetMaxU64().
llvm-svn: 315444
Previously LLDB required the DWP file
to be located next to the executable file.
This diff uses the helper function
Symbols::LocateExecutableSymbolFile to search for
DWP files in the standard locations for debug symbols.
Test plan:
Build a toy test example:
main.cpp
clang -gsplit-dwarf -g -O0 main.cpp -o main.exe
llvm-dwp -e main.exe -o main.exe.dwp
mkdir -p debug_symbols
mv main.exe.dwp debug_symbols/main.exe.dwp
Run lldb:
lldb
settings set target.debug-file-search-paths ./debug_symbols
file ./main.exe
br set --name f
run
Check that debugging works:
setting breakpoints, printing local variables.
Differential revision: https://reviews.llvm.org/D38568
llvm-svn: 315387
This allows clients to avoid an unnecessary fs::status() call on each
directory entry. Because the information returned by FindFirstFileEx
is a subset of the information returned by a regular status() call,
I needed to extract a base class from file_status that contains only
that information.
On my machine, this reduces the time required to enumerate a ThinLTO
cache directory containing 520k files from almost 4 minutes to less
than 2 seconds.
Differential Revision: https://reviews.llvm.org/D38716
llvm-svn: 315378
Summary:
While the specification says that the 64bit registers are prefixed with
`x`, it seems that many people still use `r`. Until recently, we had been using
the `r` prefix instead of the `x` prefix in ds2. This caused lldb to fail during
unwinding. I think it's reasonable to check for a register prefixed with `r`,
since some people still choose to use `r`.
Reviewers: sas, fjricci, clayborg
Reviewed By: sas, clayborg
Subscribers: aemerson, javed.absar, kristof.beyls
Differential Revision: https://reviews.llvm.org/D38376
Change by Alex Langford <apl@fb.com>
llvm-svn: 315221
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
Add support for ppc64le to create breakpoints and read/write
general purpose registers.
Other features for ppc64le and functions to read/write
other registers are being implemented.
Patch by Alexandre Yukio Yamashita (alexandreyy)
Differential Revision: https://reviews.llvm.org/D38323
llvm-svn: 315008
SymbolFileDWARFDwp contains m_debug_cu_index_map which was previously
initialized incorrectly: before m_debug_cu_index.parse
is called m_debug_cu_index is empty, thus
the map was not actually getting populated properly.
This diff moves this step into a private helper method
and calls it after m_debug_cu_index.parse inside SymbolFileDWARFDwp::Create.
Test plan:
Build a toy test example
main.cpp
clang -gsplit-dwarf -g -O0 main.cpp -o main.exe
llvm-dwp -e main.exe -o main.exe.dwp
Build LLDB with ENABLE_DEBUG_PRINTF set.
Run: lldb -- ./main.exe
Check that the indexes are now correct
(before this change they were empty)
Check that debugging works
(setting breakpoints, printing local variables (this was not working before))
Differential revision: http://reviews.llvm.org/D38492
llvm-svn: 314832
FreeBSD kernel modules are actually relocatable (.o) ELF files and this
previously caused some issues for LLDB. This change addresses these when
using lldb to symbolicate FreeBSD kernel backtraces.
The major problems:
- Relocations were not being applied to the DWARF debug info despite
there being code to do this. Several issues prevented it from working:
- Relocations are computed at the same time as the symbol table, but
in the case of split debug files, symbol table parsing always
redirects to the primary object file, meaning that relocations would
never be applied in the debug file.
- There's actually no guarantee that the symbol table has been parsed
yet when trying to parse debug information.
- When actually applying relocations, it will segfault because the
object files are not mapped with MAP_PRIVATE and PROT_WRITE.
- LLDB returned invalid results when performing ordinary address-to-
symbol resolution. It turned out that the addresses specified in the
section headers were all 0, so LLDB believed all the sections had
overlapping "file addresses" and would sometimes return a symbol from
the wrong section.
Patch by Brian Koropoff
Differential Revision: https://reviews.llvm.org/D38142
llvm-svn: 314672
This setting can be enabled like this at the target level:
(lldb) settings set target.experimental.use-modern-type-lookup true
This causes several new behaviors in the Clang expression parser:
- It completely disables use of ClangASTImporter. None are created
at all, and all users of it are now conditionalized on its
presence.
- It instead constructs a per-expression ExternalASTMerger, which
exists inside Clang and contains much of the type completion
logic that hitherto lived in ExternalASTSource,
ClangExpressionDeclMap, and ClangASTImporter.
- The expression parser uses this Merger as a backend for copying
and completing types.
- It also constructs a persistent ExternalASTMerger which is
connected to the Target's persistent AST context.
This is a major chunk of LLDB functionality moved into Clang. It
can be tested in two ways:
1. For an individual debug session, enable the setting before
running a target.
2. For the testsuite, change the option to be default-true. This
is done in Target.cpp's g_experimental_properties. The
testsuite is not yet clean with this, so I have not committed
that switch.
I have filed a Bugzilla for extending the testsuite to allow
custom settings for all tests:
https://bugs.llvm.org/show_bug.cgi?id=34771
I have also filed a Bugzilla for fixing the remaining testsuite
failures with this setting enabled:
https://bugs.llvm.org/show_bug.cgi?id=34772
llvm-svn: 314458
stack pointer for apple's armv7 ABI. When in a frameless function
or in a prologue/epilogue where sp wasn't properly aligned, we could
try to make function calls with an unaligned sp; the expression
would crash.
llvm-svn: 314265
The IR dynamic checks are self-contained functions whose job is to
- verify that pointers referenced in an expression are valid at runtime; and
- verify that selectors sent to Objective-C objects by an expression are
actually supported by that object.
These dynamic checks forward-declare all the functions they use and should not
require any external debug information. The way they ensure this is by marking
all the names they use with a dollar sign ($). The expression parser recognizes
such symbols and perform no lookups for them.
This patch fixes three issues surrounding the use of the dollar sign:
- to fix a MIPS issue, the name of the pointer checker was changed from
starting with $ to starting with _$, but this was not properly ignored; and
- the Objective-C object checker used a temporary variable that did not start
with $.
- the Objective-C object checker used an externally-defined struct (struct
objc_selector) but didn't need to.
The patch also implements some cleanup in the area:
- it reformats the string containing the Objective-C object checker,
which was mangled horribly when the code was transformed to a uniform width
of 80 columns, and
- it factors out the logic for ignoring global $-symbols into common code
shared between ClangASTSource and ClangExpressionDeclMap.
Differential Revision: https://reviews.llvm.org/D38153
llvm-svn: 314225
Using TCP sockets is insecure against local attackers, and possibly
against remote attackers too (some vulnerabilities may allow tricking a
browser to make a request to localhost). Use socketpair (which is immune
to such attacks) on all Unix platforms.
Patch by Demi Marie Obenour < demiobenour@gmail.com >
Differential Revision: https://reviews.llvm.org/D33213
llvm-svn: 314127
Summary:
This is required to be able to step through calls to external functions
that are not properly marked with __declspec(dllimport). When a call
like this is emitted, the linker will inject a trampoline to produce an
indirect call through the IAT.
Reviewers: zturner, jingham
Reviewed By: jingham
Subscribers: sas, jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D22231
llvm-svn: 314045
The core of this change is the new CommandInterpreter::m_command_state, which
models the state transitions for interactive commands, including an
"interrupted" state transition.
In general, command interruption requires cooperation from the code executing
the command, which needs to poll for interruption requests through
CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs was
likely the longest blocking part. (ex. target modules dump symtab on a
complex binary could take 10+ minutes)
patch by lemo
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 313904
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug). Also included a few small,
related fixes around how the errors propagate in this case.
Fixed the FreeBSD/Windows break: the intention was to keep
Process::WillResume() and Process::DoResume() "in-sync", but this had the
unfortunate consequence of breaking Process sub-classes which don't override
WillResume().
The safer approach is to keep Process::WillResume() untouched and only
override it in the minidump and core implementations.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313655
Summary:
This allows for the stack size to be configured, which isn't
possible with std::thread. Prevents overflowing the stack when
performing complex operations in the task pool on darwin,
where the default pthread stack size is only 512kb.
This also moves TaskPool from Utility to Host.
Reviewers: labath, tberghammer, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D37930
llvm-svn: 313637
Summary:
This allows for the stack size to be configured, which isn't
possible with std::thread. Prevents overflowing the stack when
performing complex operations in the task pool on darwin,
where the default pthread stack size is only 512kb.
Reviewers: labath, tberghammer, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D37930
llvm-svn: 313537
On Linux lldb-server sends an OK response to qfThreadInfo if no process
is started yet. I don't know why would LLDB issue a qfThreadInfo packet
before starting a process but creating a fake thread ID in case of an
OK or Error respoinse sounds bad anyway so lets not do it.
llvm-svn: 313525
OpenOCD sends register classes as two separate <feature> nodes, fixed parser to process both of them.
OpenOCD returns "l" in response to "qfThreadInfo", so IsUnsupportedResponse() was false and we were ending up without any threads in the process. I think it's reasonable to assume that there's always at least one thread.
llvm-svn: 313442
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug).
Also included a few small, related fixes around how the errors propagate in
this case.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313210
When LLDB loads "external" modules it looks at the
presence of DW_AT_GNU_dwo_name.
However, when the already created module
(corresponding to .dwo itself) is being processed,
it will see the presence of DW_AT_GNU_dwo_name
(which contains the name of dwo file) and
will try to call ModuleList::GetSharedModule again.
In some cases (i.e. for empty files) Clang 4.0
generates a *.dwo file which has DW_AT_GNU_dwo_name,
but no DW_AT_comp_dir. In this case the method
ModuleList::GetSharedModule will fail and
the warning will be printed. To workaround this issue,
one can notice that in this case we don't actually need
to try to load the already loaded module (corresponding to .dwo).
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D37295
llvm-svn: 313083
A clang change caused the inclusion of `llvm::Type` and
`lldb_private::Type` to be pulled into the global namespace due to the
`using namespace llvm;` and `using namespace lldb_private;`. Explicitly
qualify the `Type` to resolve the ambiguity. NFC
llvm-svn: 312841
Even though the content of the minidump does not change in a debugging session,
frames can't be indiscriminately be cached since modules and symbols can be
explicitly added after the minidump is loaded.
The fix is simple, just let the base Thread::ClearStackFrames() do its job.
submitted by amccarth on behalf of lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34510
Differential Revision: https://reviews.llvm.org/D37527
llvm-svn: 312735
The goal of this patch is twofold:
First, it removes a wrong comment (at least, not correctly describing
what the function does).
Then, it rewrites the function to use a StringSwitch where the
registers are enumerated explicitly instead of being computed
programmatically. Other than being much shorter, it's much easier to
read (and given the ABI won't change anytime soon, I don't think
there's need to generalize).
While here, I added an assert that the register name is always empty,
as the previous implementation of the function assumed so.
Differential Revision: https://reviews.llvm.org/D37420
llvm-svn: 312501
attach by pid worked when running from the directory from which the
target was launched, but failed from a different directory. Use the
kern.proc.pathname sysctl to locate the target, falling back to the
original case of the target's argv[0] if that fails. Based on a patch
from Vignesh Balu.
Differential Revision: https://reviews.llvm.org/D32271
llvm-svn: 312430
The socket bind address should either be localhost or anyaddress. This bug in the listen behavior was preventing lldb-server from opening sockets for non-localhost connections.
The added test verifies that opening an anyaddress socket works and has a non-zero port assignment.
This should resolve PR34183.
llvm-svn: 312008
Summary:
The DWP (DWARF package) format is used to pack multiple dwo files
generated by split-dwarf into a single ELF file to make distributing
them easier. It is part of the DWARFv5 spec and can be generated by
dwp or llvm-dwp from a set of dwo files.
Caviats:
* Only the new version of the dwp format is supported (v2 in GNU
numbering schema and v5 in the DWARF spec). The old version (v1) is
already deprecated but binutils 2.24 still generates that one.
* Combining DWP files with module debugging is not yet supported.
Subscribers: emaste, mgorny, aprantl
Differential Revision: https://reviews.llvm.org/D36062
llvm-svn: 311775
in a dSYM, and it's a version 2 DBGSourcePathRemapping,
in addition to the build/source paths specified, add
build/source paths with the last two filename components
removed. This more generic remapping can sometimes
help lldb to find the correct source file in complex
projects.
<rdar://problem/33973545>
llvm-svn: 311622
The FXSAVE member `ftw` (FPU Tag Word) was given the wrong size (8-bit)
instead of the correct width (16-bit) as per the x87 Programmer's
Manual. Adjust this to ensure that we print out the complete value for
the register.
llvm-svn: 311579
Add explicit linkage to the necessary system libraries in the Host
library. Otherwise, the library fails to build with -Wl,--as-needed.
The system libraries ended up being listed on the linker command-line
before the static libraries needing them, resulting in --as-needed
stripping them.
Listing the dependent libraries explicitly is the canonical way of
declaring libraries in CMake. It guarantees that the system library
dependencies will be correctly propagated to reverse dependencies.
The code used to link libraries reuses existing EXTRA_LIBS variable,
copying code from other parts of LLDB. We might eventually remove
the direct use of system libraries in the programs; however, I would
prefer if we focused on fixing the build regressions in 5.0 branch
first, and went further after the release.
Differential Revision: https://reviews.llvm.org/D36885
llvm-svn: 311354
"Prevent negative chars from being sign-extended into isprint and isspace which take and int and crash if the int is negative"
https://reviews.llvm.org/D36620
llvm-svn: 311207
The Core library calls functions provided by the curses library. Add
an appropriate explicit LINK_LIBS to ${CURSES_LIBRARIES} to propagate
the dependency correctly within the build system.
It seems that so far the linkage was handled by some kind of implicit
magic LLDB_SYSTEM_LIBS variable. However, it stopped working for
unittests as the curses libraries are passed before the LLDBCore
library, resulting in `-Wl,--as-needed` stripping the yet-unused library
before it is required by LLDBCore, and effectively breaking the build.
I think it's better to focus on listing all the dependencies explicitly
and let CMake propagate them rather than trying to figure out why this
hack stopped working.
This is also more consistent with LLVM where the curses linkage
in LLVMSupport is expressed directly in the library rather than deferred
to the final programs.
Differential Revision: https://reviews.llvm.org/D36358
llvm-svn: 311122
* Enable i386 ABI creation for freebsd
* Added an extra argument in ABISysV_i386::PrepareTrivialCall for mmap
syscall
* Unlike linux, the last argument of mmap is actually 64-bit(off_t).
This requires us to push an additional word for the higher order bits.
* Prior to this change, ktrace dump will show mmap failures due to
invalid argument coming from the 6th mmap argument.
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D34776
llvm-svn: 311002
It was completly unused and broke the part of the encapsulation that
common code shouldn't depend on specific plugins or language specific
features.
llvm-svn: 311000
To detect the correct function name based on the list of available symbols instead of the SDK version
Reviewers: tberghammer, clayborg
Subscribers: jaydeep, bhushan, lldb-commits
Differential Revision: https://reviews.llvm.org/D36445
llvm-svn: 310856
This is the FreeBSD equivalent of r238549.
This serves 2 purposes:
* LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
SIGFPE the way it is suppose to be handled. Prior to this fix these
signals will neither create a coredump, nor exit from the debugger
or work for signal handling scenario.
* eInvalidCrashReason need not report "unknown crash reason" if we have
a valid si_signo
llvm.org/pr23699
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D35223
llvm-svn: 310591
Summary:
The available platform list was previously only accessible via the
`platform list` command, this patch makes it possible to access that
list via the SBDebugger API. The active platform list has likewise
been exposed via the SBDebugger API.
Differential Revision: https://reviews.llvm.org/D35760
llvm-svn: 310452
You can get a breakpoint to auto-continue by adding "continue"
as a command, but that has the disadvantage that if you hit two
breakpoints simultaneously, the continue will force the process
to continue, and maybe even forstalling the commands on the other.
The auto-continue flag means the breakpoints can negotiate about
whether to stop.
Writing tests, I wanted to supply some commands when I made the
breakpoints, so I also added that ability.
llvm-svn: 309969
When an option was set at on a location, I was just copying the whole option set
to the location, and letting it shadow the breakpoint options. That was wrong since
it meant changes to unrelated options on the breakpoint would no longer take on this
location. I added a mask of set options and use that for option propagation.
I also added a "location" property to breakpoints, and added SBBreakpointLocation.{G,S}etCommandLineCommands
since I wanted to use them to write some more test cases.
<rdar://problem/24397798>
llvm-svn: 309772
Summary:
Implement SBProcessInfo to wrap lldb_private::ProcessInstanceInfo,
and add SBProcess::GetProcessInfo() to retrieve info like parent ID,
group ID, user ID etc. from a live process.
Differential Revision: https://reviews.llvm.org/D35881
llvm-svn: 309664
Current LLDB (that is without DWZ support) crashes accessing Fedora debug info:
READ of size 8 at 0x60200000ffc8 thread T0
#0 in DWARFDebugInfoEntry::BuildAddressRangeTable(SymbolFileDWARF*, DWARFCompileUnit const*, DWARFDebugAranges*) const tools/lldb/source/Plugins/SymbolFile/DWARF/DWARFDebugInfoEntry.cpp:1336
Greg Clayton: We will need a warning to be emitted in
SymbolFileDWARF::CalculateAbilities() stating we won't parse the DWARF due to
"unsupported DW_FORM value of 0x1f20".
Patch has been mostly written by Greg Clayton.
Differential revision: https://reviews.llvm.org/D35622
llvm-svn: 309581
Summary:
Clang recently started to emit base address entries into the
.debug_ranges section to reduce the number of relocations needed. Lets
make sure LLDB can read them.
llvm-svn: 309554
This patch does the following:
* Gets the header copy step to re-run whenever header change
* Gets the header fix-up step to re-run whenever headers are copied
* Removes lldb-private*.h headers from the installed headers
llvm-svn: 309394
On iOS frameworks don't have versions or resources, they are flatter bundles. This updates the LLDB framework build to accommodate the flatter bundles.
llvm-svn: 309025
This adds an explicit step for processing the headers and restructures how the framework bundles are constructed. This should make the frameworks more reliably constructed.
llvm-svn: 309024
s_source_map in ClangExternalASTSourceCommon.cpp is unguarded
and therefore can break in multithreaded conditions. This can
cause crashes in particular if multiple targets are being set
up at once.
This patch wraps s_source_map in a function that ensures
exclusivity, and makes every user of it use that function
instead.
<rdar://problem/33429774> lldb crashes after "resume_off"
Differential Revision: https://reviews.llvm.org/D35083
llvm-svn: 308993
Now -shlib flag can be provided alongside with names of symbols files:
(lldb) target symbols add --shlib stripper-lib.so unstripper-lib.so
This is helpful when default matching mechanisms by name and UUID
can't find a module, and the user needs to explicitly specify
which module the given symbol file belongs to.
Differential Revision: https://reviews.llvm.org/D35607
llvm-svn: 308933
This reapplies https://reviews.llvm.org/D35740 with a tweak to find
the section by name rather than type. Section types don't distinguish
between regular sections and their DWO counterparts.
llvm-svn: 308905
The DWO handling code can get confused by clang modules which also use
skeleton CUs to point to the object file with the full debug
info. This patch detects whether an object is a "real" DWO or a clang
module and prevents LLDB from interpreting clang modules as DWO. This
fixes the regression in TestWithModuleDebugging.
http://llvm.org/bugs/show_bug.cgi?id=33875
Differential Revision: https://reviews.llvm.org/D35740
llvm-svn: 308850
This commit removes a very old deprecated API that was causing compile failures for LLDB on Darwin. Since the comment says we only needed to keep the old API around for a few Xcode builds, and the comment was written 6 years ago... I think this can safely go away.
Failure URL:
http://lab.llvm.org:8080/green/view/LLDB/job/lldb_build_test/29936/console
llvm-svn: 308509
Cast to `const uint8_t *` instead of `uint8_t *` to avoid the warning
from GCC.
EmulationStateARM.cpp:206:34: warning: cast from type 'const void*' to type 'uint8_t* {aka unsigned char*}' casts away qualifiers [-Wcast-qual]
Cast to `const uint32_t *` and the explicitly cast away the const-ness
of the value. This seems pretty sketchy as the `DataExtractor` holds a
const reference to the data. However, this is no worse than before.
ObjectFilePECOFF.cpp:540:78: warning: cast from type 'const uint8_t* {aka const unsigned char*}' to type 'uint32_t* {aka unsigned int*}' casts away qualifiers [-Wcast-qual]
llvm-svn: 308489
Summary:
SBBreakpointLocation exposed the ignore count, but didn't expose
the hit count. Both values were exposed by SBBreakpoint and
SBWatchpoint, so this makes things a bit more consistent.
Reviewers: lldb-commits
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31283
llvm-svn: 308480
Summary:
It defined a couple of types (condition_t) which we don't use anymore,
as we have c++11 goodies now. I remove these definitions.
Also it unnecessarily included a couple of headers which weren't
necessary for it's operation. I remove these, and place the includes in
the relevant files (usually .cpp, usually in Host code) which use them.
This allows us to reduce namespace pollution in most of the lldb files
which don't need the OS-specific definitions.
Reviewers: zturner, jingham
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D35113
llvm-svn: 308304
Summary:
The usage of shared_from_this forces us to separate construction and
initialization phases, because shared_from_this() is not available in
the constructor (or destructor). The shared semantics are not necessary,
as we always have a clear owner of the native process class
(GDBRemoteCommunicationServerLLDB object). Even if we need shared
semantics in the future (which I think we should strongly avoid),
reverting this will not be necessary -- the owners can still easily
store the native process object in a shared pointer if they really want
to -- this just prevents the knowledge of that from leaking into the
class implementation.
After this a NativeThread object will hold a reference to the parent
process (instead of a weak_ptr) -- having a process instance always
available allows us to simplify some logic in this class (some of it was
already simplified because we were asserting that the process is
available, but this makes it obvious).
Reviewers: krytarowski, eugene, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35123
llvm-svn: 308282
While adding IPv6 support to debugserver I broke handling wildcard addresses and fully qualified address filtering. This patch resolves that bug and adds a test for matching the address "*".
<rdar://problem/32947613>
llvm-svn: 307957
The interpreter gets invoked in the sigint handler to cancel
long-running Python operations. That requires the interpreter
lock, but that may be held by the Python operation that's getting
interrupted, so the mutex needs to be recursive.
<rdar://problem/33179086>
llvm-svn: 307942
Store file descriptors from loop.m_read_fds (if FORCE_PSELECT is
defined) and signals from loop.m_signals that need to be processed in
MainLoop::RunImpl::ProcessEvents() into a separate vector and then
iterate over this container to invoke the callbacks.
This prevents a problem where when the code iterated directly over
m_read_fds/m_signals, a callback invoked from within the loop could
modify these variables and invalidate the loop iterator. This would then
result in an assertion failure in llvm::DenseMapIterator::operator++().
Differential Revision: https://reviews.llvm.org/D35298
llvm-svn: 307782
Summary:
This patch adds support for sending strings along with
error codes in the reply packets. The implementation is
based on the feedback recieved in the lldb-dev mailing
list. The patch also adds an extra packet for the client
to query if the server has the capability to provide
strings along with error replys.
Reviewers: labath, jingham, sas, lldb-commits, clayborg
Reviewed By: labath, clayborg
Differential Revision: https://reviews.llvm.org/D34945
llvm-svn: 307768
Summary:
Testing the value of type_code against the closed enum TypeCodes
provides statically verifiable completeness of testing. However, one
branch assigns to type_code by casting directly from a masked integer
value. This is currently handled by adding a default: case after
checking each TypeCodes instance. This patch introduces a bool variable
containing the "default" state value, allowing the switch to be
exhaustive, protect against future instances not being handled in the
switch, and preserves the original logic.
This addresses the warning:
warning: default label in switch which covers all enumeration values
[-Wcovered-switch-default]
As an issue of maintainability, the bitmask on line 524 handles the
current values of TypeCodes enum, but this will be invalid if the enum
is extended. This patch does not address this, and a more closed
conversion from cfinfoa -> TypeCodes would help protect against this.
Reviewers: spyffe, lhames, sas
Reviewed By: sas
Subscribers: sas, lldb-commits
Differential Revision: https://reviews.llvm.org/D35036
llvm-svn: 307712
In NativeProcessLinux::MonitorSIGTRAP we were asserting that the si_code
value is one of the codes we know about. However, that list was very
incomplete -- for example, we were not handling SI_TKILL/SI_USER,
generated by raise(SIGTRAP). A cursory examination show there are at
least a dozen codes like these that an app can generate, and more can be
added at any point.
So, instead of trying to play catchup, I change the default behavior to
treat an unknown si_code like an ordinary signal. The only reason we
needed to inspect si_code in the first place is because
watchpoint/breakpoints are notified as SIGTRAP, but we already know
about those, and us starting to use a new debug event is far less likely
than somebody introducing a new non-debug event.
I add a test case to TestRaise to verify we are handling raise(SIGTRAP)
in an application properly.
llvm-svn: 307644
Summary:
On linux on ppc64le some of the enums in AuxVector have the same name
as macros defined in the system.
Reviewers: mikesart, labath
Reviewed By: labath
Subscribers: joerg, gut, krytarowski, lldb-commits
Differential Revision: https://reviews.llvm.org/D35065
Patch by Bruno Rosa <bruno.rosa@eldorado.org.br>
llvm-svn: 307632
blocks of memory, and if the final bytes of that block look like a long
x86 instruction, it can cause the llvm disassembler to read past the end
of the buffer. Use the maximum allowed instruction length that we pass
to the llvm disassembler as a way to limit this to the size of the buffer.
An example of how to trigger this is when lldb does a function call, it
puts a breakpoint on the beginning of main() and uses that as the return
address from the function call. When we stop at that location, lldb may
try to find the first frame up the stack. Because this is on the first
instruction of a function, it will get the word-size value at the stack
pointer and assume that this was the caller's pc value. But this is random
stack memory and could point to anything - an object in memory, something
in the data section, whatever. And if we have a symbol for that thing,
we'll try to disassemble it.
This was leading to infrequent crashes in customer scenarios; figured out
what was happening with address sanitizer.
<rdar://problem/30463256>
llvm-svn: 307454
Summary:
This replaces the static functions used for creating
NativeProcessProtocol instances with a factory pattern, and modernizes
the interface of the new class in the process -- I use llvm::Expected
instead of the Status+value combo. I also move some of the common code
(like the Delegate registration into the base class). The new
arrangement has multiple benefits:
- it removes the NativeProcess*** dependency from Process/gdb-remote
(which for example means that liblldb no longer pulls in this code).
- it enables unit testing of the GDBRemoteCommunicationServerLLGS class
(by providing a mock Native Process).
- serves as another example on how to use the llvm::Expected class (I
couldn't get rid of the Initialize-type functions completely here
because of the use of shared_from_this, but that's the next thing on
my list here)
Tests still pass on Linux and I've made sure NetBSD compiles after this.
Reviewers: zturner, eugene, krytarowski
Subscribers: srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33778
llvm-svn: 307390
Summary:
On older android targets, we needed a dlopen rename workaround to get
"process load" working. Since API 26 this is not required as the targets
have a proper libdl so with the function names one would expect.
To make this work I've had to remove the const qualifier from the
GetLibdlFunctionDeclarations function (as now the declarations can
depend on the connected target). Since I was already modifying the
prototype (and the lower levels were already converted to StringRef) I
took the oportunity to convert this function as well.
llvm-svn: 307160
Summary:
The std::move was preventing copy ellision when compiled with
clang, the patch fixes the warning along with rearranging code
to remove unused variables warnings on Linux machines with
older perf_event interface.
Reviewers: labath, ted
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D34946
llvm-svn: 307030
NSSetM has two in-memory representations depending on what Foundation version is in use.
This patch separates the two.
rdar://33057292
Differential Revision: https://reviews.llvm.org/D34821
llvm-svn: 306773
Summary:
The classes have no dependencies, and they are used both by lldb and
lldb-server, so it makes sense for them to live in the lowest layers.
Reviewers: zturner, jingham
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34746
llvm-svn: 306682
Summary:
The instruction pattern:
and $-16, %esp
sub $imm, %esp
...
lea imm(%ebp), %esp
appears when the compiler is realigning the stack (for example in
main(), or almost everywhere with -mstackrealign switch). The "and"
instruction is very difficult to model, but that's not necessary, as
these frames are always %ebp-based (the compiler also needs a way to
restore the original %esp). Therefore the plans we were generating for
these function were almost correct already. The only place we were doing
it wrong were the last instructions of the epilogue (usually just
"ret"), where we had to revert to %esp-based unwinding, as the %ebp had
been popped already.
This was wrong because our "distance of esp from cfa" counter had picked
up the "sub" instruction (and incremented the counter) but it had not
seen that the register was reset by the "lea" instruction.
This patch fixes that shortcoming, and adds a test for handling
functions like this.
I have not been able to tickle the compiler into producing a 64-bit
function with this pattern, but I don't see a reason why it couldn't
produce it, if it chose to, so I add a x86_64 test as well.
Reviewers: jasonmolenda, tberghammer
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D34750
llvm-svn: 306666
some methods in the ABI need a Process to do their work.
Instead of passing it in as a one-off argument to those
methods, this patch puts it in the base class and the methods
can retrieve if it needed.
Note that ABI's are sometimes built without a Process
(e.g. SBTarget::GetStackRedZoneSize) so it's entirely
possible that the process weak pointer will not be
able to reconsistitue into a strong pointer.
<rdar://problem/32526754>
llvm-svn: 306633
Summary:
instead of using a boolean to differentiate between the two section
types, use an enum to make the intent clearer.
I also remove the RegisterKind argument from the constructor, as this
can be deduced from the Type argument.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D34681
llvm-svn: 306521
Summary:
This patch implements support for Intel(R) Processor Trace
in lldb server. The changes have support for
starting/stopping and reading the trace data. The code
is only available on Linux versions where the perf
attributes for aux buffers are available.
The patch also consists of Unit tests for testing the
core buffer reading function.
Reviewers: lldb-commits, labath, clayborg, zturner, tberghammer
Reviewed By: labath, clayborg
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D33674
llvm-svn: 306516
Summary:
This is a beefed-up version of D33504, which adds support for dwarf 4
debug_frame section format.
The main difference here is that the decision whether to use eh_frame or
debug_frame is done on a per-function basis instead of per-object file.
This is necessary because one module can contain both sections (for
example, the start files added by the linker will typically pull in
eh_frame), but we want to be able to access both, for maximum
information.
I also add unit test for parsing various CFI formats (eh_frame,
debug_frame v3 and debug_frame v4).
Reviewers: jasonmolenda, clayborg
Subscribers: mgorny, aprantl, abidh, lldb-commits, tatyana-krasnukha
Differential Revision: https://reviews.llvm.org/D34613
llvm-svn: 306397
Summary:
It had a dependency on StringConvert and file reading code, which is not
in Utility. I've replaced that code by equivalent llvm operations.
I've added a unit test to demonstrate that parsing a file still works.
Reviewers: zturner, jingham
Subscribers: kubamracek, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34625
llvm-svn: 306394
Summary:
These interfaces have no dependencies, so it makes sense for them to be
in the lowest level modules, to make sure that other parts of the
codebase can use them without introducing loops.
The only exception here is the Connection::CreateDefaultConnection
method, which I've moved to Host, as it instantiates concrete
implementations, and that's where the implementations live.
Reviewers: jingham, zturner
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D34400
llvm-svn: 306391
Summary:
The new UndefinedBehaviorSanitizer plugin was breaking file path length
limits, because it's (fairly long name) appears multiple times in the
path. Cmake ends up putting the object file at path
tools/lldb/source/Plugins/InstrumentationRuntime/UndefinedBehaviorSanitizer/CMakeFiles/lldbPluginInstrumentationRuntimeUndefinedBehaviorSanitizer.dir/UndefinedBehaviorSanitizerRuntime.cpp.obj
which is 191 characters long and very dangerously close to the 260
character path limit on windows systems (also, just the include line for
that file was breaking the 80 character line limit).
This renames the sanitizer plugins to use shorter names (asan, ubsan,
tsan). I think this will still be quite understandable to everyone as
those are the names everyone uses to refer to them anyway.
Reviewers: zturner, kubamracek, jingham
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D34553
llvm-svn: 306278
This was broken due to directly including windows.h, which
caused a problem when someone in LLVM called std::min in a header
file. LLDB has a windows.h include to work around this, but it
wasn't being used in these two files.
llvm-svn: 306186
Summary: Reported by coverity, I don't know how to provide a test.
Reviewers: zturner
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D34550
llvm-svn: 306134
Summary:
This is basically a revert of D16107 and parts of D10800, which were
trying to get vdso loading working. They did this by implementing a
generic load-an-elf-file from memory approach, which is not correct,
since we cannot assume that an elf file is loaded in memory in full (it
usually isn't, as there's no need to load section headers for example).
This meant that we would read garbage instead of section sizes, and if
that garbage happened to be a large number, we would crash while trying
to allocate a buffer to accomodate the hypothetical section.
Instead of this, I add a bit of custom code to load the vdso to
DynamicLoaderPOSIXDYLD (which already needed to handle the vdso
specially). I determine the size of the memory to read using
Process::GetMemoryRegionInfo, which is information coming from the OS,
and cannot be forged by a malicious/misbehaving application.
Reviewers: eugene, clayborg
Subscribers: lldb-commits, ravitheja, tberghammer, emaste
Differential Revision: https://reviews.llvm.org/D34352
llvm-svn: 305780
Summary:
Use c++11 thread_local variables instead. As far as I am aware, they are
supported by all compilers/targets we care about.
Reviewers: zturner, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D34274
llvm-svn: 305779
I was seeing some unlikely errno values here. I am not sure if this will
help, but it nontheless seems like a good idea to stash errno value
before issuing other syscalls.
llvm-svn: 305778
Summary:
A number of places were trying to decode the result of wait(). Add a simple
utility function that does that and a struct that encapsulates the
decoded result. Then also provide a pretty-printer for that class.
Reviewers: zturner, krytarowski, eugene
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33998
llvm-svn: 305689
Summary:
The motivation for this is to make sure the first row of the plan
compares equal to the first row of a generic debug_frame unwind plan.
Right now, the code in FuncUnwinders::GetUnwindPlanAtNonCallSite
considers them unequal because they specify the return address in a
different way (SetReturnAddressRegister(LR) vs. an explicit PC=LR rule).
This means that FuncUnwinders would always choose the debug_frame unwind
plan, which is not correct, as that one is usually not correct at all
locations.
Right now this is basically a noop because we don't have parse any
debug_frame plans, but it fixes some test failures when merging D33504
in.
I have to say I don't understand the full implications of the switch to
SetReturnAddressRegister() way of doing things, but given that all of
our other unwind plans (eh_frame, instruction profiling) do it this way,
it sounds like the right thing to do.
Reviewers: tberghammer, jasonmolenda, omjavaid
Subscribers: aemerson, javed.absar, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D34199
llvm-svn: 305687
Summary:
ProcessLauncherPosix was using posix_spawn for launching the process,
but this function is not available on all platforms we support, and even
where it was avaialable, it did not support the full range of options we
require for launching (most importantly, launching in stop-on-entry
mode). For these reasons, the set of ifdefs around these functions has
grown untractably large, and we were forced to implement our own
launcher from more basic primitives anyway (ProcessLauncherPosixFork --
used on Linux, Android, and NetBSD).
Therefore, I remove this class, and move the relevant parts of the code
to the darwin-specific Host.mm file. This is the platform that code was
originally written for anyway, and it's the only platform where this
implementation makes sense (e.g. the lack of the "thread-specific
working directory" concept makes these functions racy on all other
platforms). This allows us to remove a lot of ifdefs and simplify the
code.
Effectively, the only change this introduces is that FreeBSD will now
use the fork-based launcher instead of posix_spawnp. That sholdn't be a
problem as this approach works at least on one other BSD-based system
already.
Reviewers: krytarowski, emaste, jingham
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34236
llvm-svn: 305686
the FileSpec methods for adding/removing file path components instead
of using std::strings; feedback from Sean on the change I added in
r305441.
<rdar://problem/31825940>
llvm-svn: 305547
components to not depend on "." characters in the fileanme
(e.g. "Foundation.framework") but instead to just use path
separators. The names of the files themselves may have dots
in them ("com.apple.sbd") which would break the old scheme.
Also add a test case for this (macosx/find-dsym/bundle-with-dot-in-filename)
as well as a test case for r304520 (macosx/find-dsym/deep-bundle)
which needed a similar setup to test correctly on a single machine.
(both of these are really testing remote debug session situations
where the binary can't be found on the system where lldb is running,
complicating the test case a bit.)
<rdar://problem/31825940>
llvm-svn: 305441
This patch introduces a new thread backtrace command "unique".
The command is based off of "thread backtrace all" but will instead
find all threads which share matching call stacks and de-duplicate
their output, listing call stack and all the threads which share it.
This is especially useful for apps which use thread/task pools
sitting around waiting for work and cause excessive duplicate output.
I needed this behavior recently when debugging a core with 700+ threads.
Differential Revision: https://reviews.llvm.org/D33426
Reviewers: clayborg, jingham
Patch by Brian Gianforcaro <b.gianfo@gmail.com>
llvm-svn: 305197
Summary:
When a call instruction is the last instruction in a function, the
backtrace PC will point past the end of the function. We already had
special code to handle that, but we did not handle the case where the PC
ends up outside of the bounds of the module containing the function,
which is a situation that occured in TestNoreturnUnwind on android for
some arch/compiler combinations.
I fix this by adding an argument to Address resolution code which states
that we are ok with addresses pointing to the end of a module/section to
resolve to that module/section.
I create a reproducible test case for this situation by hand-crafting an
executable which has a noreturn function at the end of a module.
Reviewers: jasonmolenda, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32022
llvm-svn: 304976
The function does not persist the callback, so using a lighter-weight
asbtraction seems appropriate.
Also tweak the signatures of the lambdas to match what the TaskMap
interface expects.
llvm-svn: 304924
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
strerror is not thread-safe. llvm's StrError tries hard to retrieve the
string in a thread-safe way and falls back to strerror only if it does
not have another way.
llvm-svn: 304795
Summary:
Don't access `name[1] if the string is only of length 1. Avoids a
crash/assertion failure when parsing the string `-`.
Test Plan:
Debug a swift binary, set a breakpoint, watch lldb not crash
Original change by Paul Menage <menage@fb.com>
Reviewers: lldb-commits, clayborg
Differential Revision: https://reviews.llvm.org/D33853
llvm-svn: 304725
from PlatformRemoteDarwinDevice into PlatformDarwin, and have both
PlatformRemoteDarwinDevice and PlatformMacOSX call it there.
<rdar://problem/31825940>
llvm-svn: 304520
When parsing types originating in modules, it is possible to encounter AttributedTypes
(such as the type generated for NSString *_Nonnull). Some of LLDB's ClangASTContext
methods deal with them; others do not. In particular, one function that did not was
GetTypeInfo, causing TestObjCNewSyntax to fail.
This fixes that, treating AttributedType as essentially transparent and getting the
information for the modified type.
In addition, however, TestObjCNewSyntax is a monolithic test that verifies a bunch of
different things, all of which can break independently of one another. I broke it
apart into smaller tests so that we get more precise failures when something (like
this) breaks.
Differential Revision: https://reviews.llvm.org/D33812
llvm-svn: 304510
Summary:
- Added API to access data types
-- integer, double, array, string, boolean and dictionary data types
-- Earlier user had to parse through the string output to get these
values
- Added Test cases for API testing
- Added new StructuredDataType enum in public include file
-- Replaced locally-defined enum in StructuredData.h with this new
one
-- Modified other internal files using this locally-defined enum
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: clayborg, lldb-commits
Reviewed By: clayborg
Subscribers: labath
Differential Revision: https://reviews.llvm.org/D33434
llvm-svn: 304138
r303972 used GetValueForKeyAsInteger with mismatched types (e.g.
instantiating with uint64_t, but passing a size_t argument), which
manifested itself on 32-bit architectures.
The intended usage of these functions was to not specify the type
explicitly, and let the compiler figure that out, so switch to that kind
of usage instead.
llvm-svn: 303988
Summary:
The changes consist of new packets for trace manipulation and
trace collection. The new packets are also documented. The packets
are capable of providing custom trace specific parameters to start
tracing and also retrieve such configuration from the server.
Reviewers: clayborg, lldb-commits, tberghammer, labath, zturner
Reviewed By: clayborg, labath
Subscribers: krytarowski, lldb-commits
Differential Revision: https://reviews.llvm.org/D32585
llvm-svn: 303972
In the absense of a more specific handler for TRAP_CAP (generated by
ENOTCAPABLE or ECAPMODE while in capability mode) treat it as a trace
trap. Obtained from FreeBSD r318884.
We should later add an option to have LLDB control the trapcap procctl
(as with ASLR), as well as report a specific stop reason. For now this
change eliminates an assertion failure from LLDB.
llvm-svn: 303965
lldb: libedit produces garbled, unusable input on Linux
Apply patch from Christos Zoulas, upstream libedit developer.
It has been tested on NetBSD/amd64.
New code supports combination of wide libedit and disabled
LLDB_EDITLINE_USE_WCHAR, which was the popular case on Linux
systems.
llvm-svn: 303907
This reverts commit r303847 as it introduces a number of regressions.
Investigation has showed that we are parsing the CIE entries in the
debug_frame section incorrectly -- we are parsing them the same way as
eh_frame, but the entries in debug_frame have a couple of extra entries
which have not been taken into account.
llvm-svn: 303854
This is a resubmit of r303732, which was reverted due to a regression.
The original patch caused a regression in TestLoadUnload, which has only showed
up when running the remote test suite. The problem there was that we interrupted
the target just as it has hit the rendezvous breakpoint in the dlopen call. This
meant that the stop reason was set to "breakpoint" even though the event would
not have been broadcast if we had not stopped the process. I fix this by
checking StopInfo->ShouldNotify() before stopping.
I also add a new test for the handling of conditional breakpoints in
expressions, which I noticed to be broken (pr33164)
Differential Revision: https://reviews.llvm.org/D33283
llvm-svn: 303848
There are some differences between eh_frame and debug_frame formats that
are not considered by DWARFCallFrameInfo::GetFDEIndex. An FDE entry
contains CIE_pointer in debug_frame in same place as cie_id in eh_frame.
As described in dwarf standard (section 6.4.1), CIE_pointer is an
"offset into the .debug_frame section". So, variable cie_offset should
be equal cie_id for debug_frame.
FDE entries with zeroth CIE pointer (which is actually placed in cie_id
variable) shouldn't be ignored also.
I have also added a little change which allow to use debug_info section
when eh_frame is absent. This case really can take place on some platforms.
Patch from tatyana-krasnukha.
https://reviews.llvm.org/D33504
llvm-svn: 303847
During some cleanup the test for whether the thread plan
accepted an iteration count was reversed, so we give a
warning when it will actually work, and don't when it won't.
<rdar://problem/32379280>
llvm-svn: 303832
Summary:
The function had logic to handle the case when the expression terminated
while we were trying to halt the process, but it failed to take into
account the possibility that the expression stopped because it hit a
breakpoint. This was caused by the fact that the handling of the stopped
events was duplicated for the "halting" and regular cases (the regular
case handled this situation correctly). I've tried to merge these two
cases into one to make sure they stay in sync.
I should call out that the two cases were checking whether the thread
plan has completed in slightly different ways. I am not sure what is the
difference between them, but I think the check should be the same in
both cases, whatever it is, so I just took the one from the regular
case, as that is probably more tested.
For the test, I modified TestUnwindExpression to run the expression with
a smaller timeout (this is how I found this bug originally). With a 1ms
one thread timeout, the test failed consistently without this patch.
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D33283
llvm-svn: 303732
Summary: I didn't change all instances of i to I in this loop. I am a bad person and should feel bad. :(
Reviewers: sas
Differential Revision: https://reviews.llvm.org/D33456
Change by Alex Langford <apl@fb.com>
llvm-svn: 303677
LLVM::AttributeList recently had getNumSlots() removed, which broke the
build. This fixes the build using functions introduced in the
update to LLVM::AttributeList.
Change by Alex Langford <apl@fb.com>
llvm-svn: 303674
Change 302872 was a massive rename of the Error class to Status.
The change included an incorrect rename of the "Status" window
in the LLDB GUI from "Status to "Error". This patch undoes this incorrect
rename and restores the status window's correct name.
Differential Revision: https://reviews.llvm.org/D33241
Patch by Brian Gianforcaro.
llvm-svn: 303553
Summary:
This adds functions to convert between llvm::Error and Status classes.
Posix errors in Status are represented as llvm::ECError, and the rest as
llvm::StringError.
For the conversion from Error to Status, ECError is again represented as
a posix error in Status, while other errors are stored as generic errors
and only the string value is preserved.
Reviewers: zturner, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D33241
llvm-svn: 303348
When it resolves symbol-only variables, the expression parser
currently looks only in the global module list. It should prefer
the current module.
I've fixed that behavior by making it search the current module
first, and only search globally if it finds nothing. I've also
added a test case.
After review, I moved the core of the lookup algorithm into
SymbolContext for use by other code that needs it.
Thanks to Greg Clayton and Pavel Labath for their help.
Differential Revision: https://reviews.llvm.org/D33083
llvm-svn: 303223
ptr_refs exposed a problem in ClangASTContext's implementation: it
uses an accessor to downcast a QualType to an
ObjCObjectPointerType, but the accessor is not fully general.
getAs() is the safer way to go.
I've added a test case that uses ptr_refs in a way that would
crash before the fix.
<rdar://problem/31363513>
llvm-svn: 303110
The Timer destructor would grab a global mutex in order to update
execution time. Add a class to define a category once, statically; the
class adds itself to an atomic singly linked list, and thus subsequent
updates only need to use an atomic rather than grab a lock and perform a
hashtable lookup.
Differential Revision: https://reviews.llvm.org/D32823
Patch by Scott Smith <scott.smith@purestorage.com>.
llvm-svn: 303058
It was returning const std::string& which was leading to
unnecessary copies all over the place, and preventing people
from doing things like Dict->GetValueForKeyAsString("foo", ref);
llvm-svn: 302875
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
Templates can end in parameter packs, like this
template <class T...> struct MyStruct
{ /*...*/ };
LLDB does not currently support these parameter packs;
it does not emit them into the template argument list
at all. This causes problems when you specialize, e.g.:
template <> struct MyStruct<int>
{ /*...*/ };
template <> struct MyStruct<int, int> : MyStruct<int>
{ /*...*/ };
LLDB generates two template specializations, each with
no template arguments, and then when they are imported
by the ASTImporter into a parser's AST context we get a
single specialization that inherits from itself,
causing Clang's record layout mechanism to smash its
stack.
This patch fixes the problem for classes and adds
tests. The tests for functions fail because Clang's
ASTImporter can't import them at the moment, so I've
xfailed that test.
Differential Revision: https://reviews.llvm.org/D33025
llvm-svn: 302833
If we can't find the "is dyld locked" symbol, assume it is safe
to load the image unless we only have 1 image loaded - in which case
we are in _dyld_start and it is definitely NOT safe.
Also add a little better errors to that function, and better logging
in SBProcess.cpp.
<rdar://problem/30174817>
llvm-svn: 302327
These methods can be used by the derived expression types to perform expression
specific and/or language specific actions before and after the expression runs.
(ThreadPlanCallUserExpression is modified to call these methods on the
expression immediately before/after execution of the expression).
The immediate motivation is allowing Swift expressions to notify the swift
runtime that exclusivity enforcement should be suspended while the expression
runs (we want LLDB expressions to be able to access variables even when they're
considered exclusively owned by someone else in the original program).
Reviewed in https://reviews.llvm.org/D32889
llvm-svn: 302314
Some of the refactoring in r301492 broke UDP socket connections. This is a partial revert of that refactoring. At some point I'll spend more time diagnosing where the refactoring went wrong and how to better clean up this code, but I don't have time to do that today.
llvm-svn: 302282
Summary:
I have found a way to segfault lldb in 7 keystrokes! Steps to reproduce:
1) Launch lldb
2) Type `print` and hit enter. lldb will now prompt you to type a list of
expressions, followed by an empty line.
3) Hit enter, indicating the end of your input.
4) Segfault!
After some investigation, I've found the issue in Host/common/Editline.cpp.
Editline::MoveCursor() relies on m_input_lines not being empty when the `to`
argument is CursorPosition::BlockEnd. This scenario, as far as I can tell,
occurs in one specific instance: In Editline::EndOrAddLineCommand() when the
list of lines being processed contains exactly one string (""). Meeting this
condition is fairly simple, I have posted steps to reproduce above.
Reviewers: krytarowski, zturner, labath
Reviewed By: labath
Subscribers: scott.smith, lldb-commits
Differential Revision: https://reviews.llvm.org/D32421
Patch by Alex Langford.
llvm-svn: 302225
Summary:
Many parallel tasks just want to iterate over all the possible numbers from 0 to N-1. Rather than enqueue N work items, instead just "map" the function across the requested integer space.
Reviewers: clayborg, labath, tberghammer, zturner
Reviewed By: clayborg, zturner
Subscribers: zturner, lldb-commits
Differential Revision: https://reviews.llvm.org/D32757
Patch by Scott Smith <scott.smith@purestorage.com>.
llvm-svn: 302223
Summary:
Arm64 Procedure Call Standard specifies than only vectors up to 16 bytes
are stored in v0 (which makes sense, as that's the size of the
register). 32-byte vector types are passed as regular structs via x8
pointer. Treat them as such.
This fixes TestReturnValue for arm64-clang. I also split the test case
into two so I can avoid the if(gcc) line, and annotate each test
instead. (It seems the vector type tests fail with gcc only when
targetting x86 arches).
Reviewers: tberghammer, eugene
Subscribers: aemerson, omjavaid, rengolin, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D32813
llvm-svn: 302220
Pavel Labath