- The test had extension .yaml, which lit doesn't execute in this
directory. Rename to .test to make it run, and move the yaml bits
into a dedicated file, like with all other tests in this dir.
- llvm-pdbdump got renamed to llvm-pdbutil long ago, update test.
- -dbi-module-info got renamed in r305032, update test for this too.
llvm-svn: 365514
Function return instruction lowering, currently uses the fixed register pair s[30:31] for holding
the return address. It can be any SGPR pair other than the CSRs. Created an SGPR pair sub-register class
exclusive of the CSRs, and used this regclass while lowering the return instruction.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D63924
llvm-svn: 365512
Summary:
There was an error being thrown from isDesirableToCommuteWithShift in
some tests. This was tracked down to the method being called before
legalisation, with an extended value type, not a machine value type.
In the case I diagnosed, the error was only hit with an instruction sequence
involving `i24`s in the add and shift. `i24` is not a Machine ValueType, it is
instead an Extended ValueType which was causing the issue.
I have added a test to cover this case, and fixed the error in the callback.
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64425
llvm-svn: 365511
If we have an icmp->brcond->br sequence where the brcond just branches to the
next block jumping over the br, while the br takes the false edge, then we can
modify the conditional branch to jump to the br's target while inverting the
condition of the incoming icmp. This means we can eliminate the br as an
unconditional branch to the fallthrough block.
Differential Revision: https://reviews.llvm.org/D64354
llvm-svn: 365510
Introduction
============
This patch added intial support for bpf program compile once
and run everywhere (CO-RE).
The main motivation is for bpf program which depends on
kernel headers which may vary between different kernel versions.
The initial discussion can be found at https://lwn.net/Articles/773198/.
Currently, bpf program accesses kernel internal data structure
through bpf_probe_read() helper. The idea is to capture the
kernel data structure to be accessed through bpf_probe_read()
and relocate them on different kernel versions.
On each host, right before bpf program load, the bpfloader
will look at the types of the native linux through vmlinux BTF,
calculates proper access offset and patch the instruction.
To accommodate this, three intrinsic functions
preserve_{array,union,struct}_access_index
are introduced which in clang will preserve the base pointer,
struct/union/array access_index and struct/union debuginfo type
information. Later, bpf IR pass can reconstruct the whole gep
access chains without looking at gep itself.
This patch did the following:
. An IR pass is added to convert preserve_*_access_index to
global variable who name encodes the getelementptr
access pattern. The global variable has metadata
attached to describe the corresponding struct/union
debuginfo type.
. An SimplifyPatchable MachineInstruction pass is added
to remove unnecessary loads.
. The BTF output pass is enhanced to generate relocation
records located in .BTF.ext section.
Typical CO-RE also needs support of global variables which can
be assigned to different values to different hosts. For example,
kernel version can be used to guard different versions of codes.
This patch added the support for patchable externals as well.
Example
=======
The following is an example.
struct pt_regs {
long arg1;
long arg2;
};
struct sk_buff {
int i;
struct net_device *dev;
};
#define _(x) (__builtin_preserve_access_index(x))
static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr) =
(void *) 4;
extern __attribute__((section(".BPF.patchable_externs"))) unsigned __kernel_version;
int bpf_prog(struct pt_regs *ctx) {
struct net_device *dev = 0;
// ctx->arg* does not need bpf_probe_read
if (__kernel_version >= 41608)
bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg1)->dev));
else
bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg2)->dev));
return dev != 0;
}
In the above, we want to translate the third argument of
bpf_probe_read() as relocations.
-bash-4.4$ clang -target bpf -O2 -g -S trace.c
The compiler will generate two new subsections in .BTF.ext,
OffsetReloc and ExternReloc.
OffsetReloc is to record the structure member offset operations,
and ExternalReloc is to record the external globals where
only u8, u16, u32 and u64 are supported.
BPFOffsetReloc Size
struct SecLOffsetReloc for ELF section #1
A number of struct BPFOffsetReloc for ELF section #1
struct SecOffsetReloc for ELF section #2
A number of struct BPFOffsetReloc for ELF section #2
...
BPFExternReloc Size
struct SecExternReloc for ELF section #1
A number of struct BPFExternReloc for ELF section #1
struct SecExternReloc for ELF section #2
A number of struct BPFExternReloc for ELF section #2
struct BPFOffsetReloc {
uint32_t InsnOffset; ///< Byte offset in this section
uint32_t TypeID; ///< TypeID for the relocation
uint32_t OffsetNameOff; ///< The string to traverse types
};
struct BPFExternReloc {
uint32_t InsnOffset; ///< Byte offset in this section
uint32_t ExternNameOff; ///< The string for external variable
};
Note that only externs with attribute section ".BPF.patchable_externs"
are considered for Extern Reloc which will be patched by bpf loader
right before the load.
For the above test case, two offset records and one extern record
will be generated:
OffsetReloc records:
.long .Ltmp12 # Insn Offset
.long 7 # TypeId
.long 242 # Type Decode String
.long .Ltmp18 # Insn Offset
.long 7 # TypeId
.long 242 # Type Decode String
ExternReloc record:
.long .Ltmp5 # Insn Offset
.long 165 # External Variable
In string table:
.ascii "0:1" # string offset=242
.ascii "__kernel_version" # string offset=165
The default member offset can be calculated as
the 2nd member offset (0 representing the 1st member) of struct "sk_buff".
The asm code:
.Ltmp5:
.Ltmp6:
r2 = 0
r3 = 41608
.Ltmp7:
.Ltmp8:
.loc 1 18 9 is_stmt 0 # t.c:18:9
.Ltmp9:
if r3 > r2 goto LBB0_2
.Ltmp10:
.Ltmp11:
.loc 1 0 9 # t.c:0:9
.Ltmp12:
r2 = 8
.Ltmp13:
.loc 1 19 66 is_stmt 1 # t.c:19:66
.Ltmp14:
.Ltmp15:
r3 = *(u64 *)(r1 + 0)
goto LBB0_3
.Ltmp16:
.Ltmp17:
LBB0_2:
.loc 1 0 66 is_stmt 0 # t.c:0:66
.Ltmp18:
r2 = 8
.loc 1 21 66 is_stmt 1 # t.c:21:66
.Ltmp19:
r3 = *(u64 *)(r1 + 8)
.Ltmp20:
.Ltmp21:
LBB0_3:
.loc 1 0 66 is_stmt 0 # t.c:0:66
r3 += r2
r1 = r10
.Ltmp22:
.Ltmp23:
.Ltmp24:
r1 += -8
r2 = 8
call 4
For instruction .Ltmp12 and .Ltmp18, "r2 = 8", the number
8 is the structure offset based on the current BTF.
Loader needs to adjust it if it changes on the host.
For instruction .Ltmp5, "r2 = 0", the external variable
got a default value 0, loader needs to supply an appropriate
value for the particular host.
Compiling to generate object code and disassemble:
0000000000000000 bpf_prog:
0: b7 02 00 00 00 00 00 00 r2 = 0
1: 7b 2a f8 ff 00 00 00 00 *(u64 *)(r10 - 8) = r2
2: b7 02 00 00 00 00 00 00 r2 = 0
3: b7 03 00 00 88 a2 00 00 r3 = 41608
4: 2d 23 03 00 00 00 00 00 if r3 > r2 goto +3 <LBB0_2>
5: b7 02 00 00 08 00 00 00 r2 = 8
6: 79 13 00 00 00 00 00 00 r3 = *(u64 *)(r1 + 0)
7: 05 00 02 00 00 00 00 00 goto +2 <LBB0_3>
0000000000000040 LBB0_2:
8: b7 02 00 00 08 00 00 00 r2 = 8
9: 79 13 08 00 00 00 00 00 r3 = *(u64 *)(r1 + 8)
0000000000000050 LBB0_3:
10: 0f 23 00 00 00 00 00 00 r3 += r2
11: bf a1 00 00 00 00 00 00 r1 = r10
12: 07 01 00 00 f8 ff ff ff r1 += -8
13: b7 02 00 00 08 00 00 00 r2 = 8
14: 85 00 00 00 04 00 00 00 call 4
Instructions #2, #5 and #8 need relocation resoutions from the loader.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D61524
llvm-svn: 365503
Select gprb or fprb when def/use register operand of G_PHI is
used/defined by either:
copy to/from physical register or
instruction with only one mapping available for that use/def operand.
Integer s64 phi is handled with narrowScalar when mapping is applied,
produced artifacts are combined away. Manually set gprb to all register
operands of instructions created during narrowScalar.
Differential Revision: https://reviews.llvm.org/D64351
llvm-svn: 365494
Mostsly these would fail due to trying to use SI with a flat
operation. Implementing global loads with MUBUF is more work than
flat, so these won't be handled in the initial load selection.
Others fail because store of s64 won't initially work, as the current
set of patterns expect everything to be turned into v2i32.
llvm-svn: 365493
Select gprb or fprb when def/use register operand of G_SELECT is
used/defined by either:
copy to/from physical register or
instruction with only one mapping available for that use/def operand.
Integer s64 select is handled with narrowScalar when mapping is applied,
produced artifacts are combined away. Manually set gprb to all register
operands of instructions created during narrowScalar.
For selection of floating point s32 or s64 select it is enough to set
fprb of appropriate size and selectImpl will do the rest.
Differential Revision: https://reviews.llvm.org/D64350
llvm-svn: 365492
The `sge/sgeu Dst, Src1, Src2/Imm` pseudo instructions set register
`Dst` to 1 if register `Src1` is greater than or equal `Src2/Imm` and
to 0 otherwise.
Differential Revision: https://reviews.llvm.org/D64314
llvm-svn: 365476
The `sgt/sgtu Dst, Src1, Src2/Imm` pseudo instructions set register
`Dst` to 1 if register `Src1` is greater than `Src2/Imm` and to 0 otherwise.
Differential Revision: https://reviews.llvm.org/D64313
llvm-svn: 365475
This makes the functions in Loads.h require a type to be specified
independently of the pointer Value so that when pointers have no structure
other than address-space, it can still do its job.
Most callers had an obvious memory operation handy to provide this type, but a
SROA and ArgumentPromotion were doing more complicated analysis. They get
updated to merge the properties of the various instructions they were
considering.
llvm-svn: 365468
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
llvm-svn: 365467
APInt::getSExtValue will assert if getMinSignedBits() > 64. This can happen,
for instance, if examining an i128. Avoid this assertion by checking
Imm.getMinSignedBits() <= 64 before doing
getTLI()->isLegalAddImmediate(Imm.getSExtValue()). We could directly check
getMinSignedBits() <= 12 but it seems better to reuse the isLegalAddImmediate
helper for this.
Differential Revision: https://reviews.llvm.org/D64390
llvm-svn: 365462
DAGTypeLegalizer and SelectionDAGLegalize has helper
functions wrapping the call to TLI.getSetCCResultType(...).
Use those helpers in more places.
llvm-svn: 365456
Summary:
Make sure we use SETGE instead of SETGT when checking
if the sign bit is zero at SMULFIXSAT expansion.
The faulty expansion occured when doing "expand" of
SMULFIXSAT and the scale was exactly matching the
size of the smaller type. For example doing
i64 Z = SMULFIXSAT X, Y, 32
and expanding X/Y/Z into using two i32 values.
The problem was that we sometimes did not saturate
to min when overflowing.
Here is an example using Q3.4 numbers:
Consider that we are multiplying X and Y.
X = 0x80 (-8.0 as Q3.4)
Y = 0x20 (2.0 as Q3.4)
To avoid loss of precision we do a widening
multiplication, getting a 16 bit result
Z = 0xF000 (-16.0 as Q7.8)
To detect negative overflow we should check if
the five most significant bits in Z are less than -1.
Assume that we name the 4 most significant bits
as HH and the next 4 bits as HL. Then we can do the
check by examining if
(HH < -1) or (HH == -1 && "sign bit in HL is zero").
The fault was that we have been doing the check as
(HH < -1) or (HH == -1 && HL > 0)
instead of
(HH < -1) or (HH == -1 && HL >= 0).
In our example HH is -1 and HL is 0, so the old
code did not trigger saturation and simply truncated
the result to 0x00 (0.0). With the bugfix we instead
detect that we should saturate to min, and the result
will be set to 0x80 (-8.0).
Reviewers: leonardchan, bevinh
Reviewed By: leonardchan
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64331
llvm-svn: 365455
Some of the wording in the doc (taken largely from the help text), was a
little imprecise in some cases, so this patch makes it a little more
precise.
Reviewed by: JDevlieghere, probinson
Differential Revision: https://reviews.llvm.org/D64332
llvm-svn: 365451
Emit replacements for clobbered parameters location if the parameter
has unmodified value throughout the funciton. This is basic scenario
where we can use the debug entry values.
([12/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D58042
llvm-svn: 365444
Steven Wu