It is now a regex command alias that more faithfully emulates gdb's
behavior, most importantly, "bt 5" will backtrace 5 frames of the
currently selected thread. "bt all" still backtraces all threads
(unlike gdb) and for users who have learned to use "bt -c 5", that
form is still accepted.
llvm-svn: 165300
enabled after we'd found a few bugs that were caused by shadowed
local variables; the most important issue this turned up was
a common mistake of trying to obtain a mutex lock for the scope
of a code block by doing
Mutex::Locker(m_map_mutex);
This doesn't assign the lock object to a local variable; it is
a temporary that has its dtor called immediately. Instead,
Mutex::Locker locker(m_map_mutex);
does what is intended. For some reason -Wshadow happened to
highlight these as shadowed variables.
I also fixed a few obivous and easy shadowed variable issues
across the code base but there are a couple dozen more that
should be fixed when someone has a free minute.
<rdar://problem/12437585>
llvm-svn: 165269
remove the duplicates of this code in ProcessGDBRemote and ProcessKDP.
These two Process plugins will hardcode their DynamicLoader name to be
the DynamicLoaderDarwinKernel so the correct DynamicLoader is picked,
and return the kernel load address as the ImageInfosAddress.
<rdar://problem/12417038>
llvm-svn: 165080
the Symbols::LocateExecutableObjectFile method to locate kexts and
kernels instead of copying them out of the memory of the remote
system. This is the fix for <rdar://problem/12416384>.
Fix a variable shadowing problem in
Symbols::LocateMacOSXFilesUsingDebugSymbols which caused the symbol
rich executable binaries to not be found even if they were listed
in the dSYM Info.plist.
Change Symbols::DownloadObjectAndSymbolFile to ignore dsymForUUID's
negative cache - this is typically being called by the user and we
should try even if there's a incorrect entry in the negative cache.
llvm-svn: 165061
Shared libraries on MacOSX were not properly being removed from the shared
module list when re-running a debug session due to an error in:
Module::MatchesModuleSpec()
llvm-svn: 164991
When attaching to a remote system that does not look like a typical vendor system, and no
executable binary was specified to lldb, check a couple of fixed locations where kernels
running in ASLR mode (slid in memory to a random address) store their load addr when booted
in debug mode, and relocate the symbols or load the kernel wholesale from the host computer
if we can find it.
<rdar://problem/7714201>
llvm-svn: 164888
loaded at a random offset).
To get the kernel's UUID and load address I need to send a kdp
packet so I had to implement the kernel relocation (and attempt to
find the kernel if none was provided to lldb already) in ProcessKDP
-- but this code really properly belongs in DynamicLoaderDarwinKernel.
I also had to add an optional Stream to ConnectRemote so
ProcessKDP::DoConnectRemote can print feedback about the remote kernel's
UUID, load address, and notify the user if we auto-loaded the kernel via
the UUID.
<rdar://problem/7714201>
llvm-svn: 164881
runtime, we read method signatures for both class
and instance methods out of the runtime data.
(lldb) fr var str
(NSString *) str = 0x0000000105000180 @"Hello from '/Volumes/Data/projects/lldb/test/lang/objc/foundation/a.out'"
(lldb) expr str.length
(unsigned long long) $0 = 72
(lldb) expr [NSString stringWithCString:"Hello world!" encoding:1]
(id) $1 = 0x0000000105100050
(lldb) po $1
$1 = 0x0000000105100050 Hello world!
(lldb) fr var array1
(NSArray *) array1 = 0x000000010010a6e0 @"3 objects"
(lldb) expr array1.count
(unsigned long long) $0 = 3
(lldb) expr [array1 objectAtIndex:2]
(id) $1 = 0x00000001000025d0
(lldb) po $1
$1 = 0x00000001000025d0 array1 object3
Notice that both regular and property-style notation
work. I still need to add explicit support for
properties with non-default setters/getters.
This information is only queried if an Objective-C
object does not have debug information for a complete
type available. Otherwise we query debug information
as usual.
llvm-svn: 164878
This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands
It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface
There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin.
Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command
For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands
Caveats:
Currently, the new API objects and features are not exposed via Python.
The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object)
There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins
There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own
llvm-svn: 164865
We can now do:
Specify a path to a debug symbols file:
(lldb) add-dsym <path-to-dsym>
Go and download the dSYM file for the "libunc.dylib" module in your target:
(lldb) add-dsym --shlib libunc.dylib
Go and download the dSYM given a UUID:
(lldb) add-dsym --uuid <UUID>
Go and download the dSYM file for the current frame:
(lldb) add-dsym --frame
llvm-svn: 164806
top-of-tree. Removed all local patches and llvm.zip.
The intent is that fron now on top-of-tree will
always build against LLVM/Clang top-of-tree, and
that problems building will be resolved as they
occur. Stable release branches of LLDB can be
constructed as needed and linked to specific release
branches of LLVM/Clang.
llvm-svn: 164563
where the descriptor took a pointer to an object and
expected the Initialize function to dereference that
pointer and extract the isa value. This caused one
of our tests to fail.
llvm-svn: 164353
KDP -- now with rudimentary process control (continue only) and read + write registers (which means we can see stack frames) for x86_64, i386 and ARM.
llvm-svn: 164352
not correctly store the contents of Objective-C
classes. This was due to a combination of
factors:
1) Types were only being completed if we were
looking inside them for specific ivars
(using FindExternalVisibleDeclsByName).
We now look the complete type up at every
FindExternalLexicalDecls.
2) Even if the types were completed properly,
ValueObjectConstResult overrode the type
of every ValueObject using the complete type
for its class from the debug information.
Superclasses of complete classes are not
guaranteed to be complete. Although "frame
variable" uses the debug information,
the expression parser does now piece together
complete types at every level (as described
in Bullet 1), so I provided a way for the
expression parser to prevent overriding.
3) Type sizes were being miscomputed by
ClangASTContext. It ignored the ISA pointer
and only counted fields. We now correctly
count the ISA in the size of an object.
<rdar://problem/12315386>
llvm-svn: 164333
We can now read the relevant data structures for
the method list, and use a callback mechanism to
report their details to the AppleObjCTypeVendor,
which constructs appropriate Clang types.
llvm-svn: 164310
data structures more rapidly. Also added fields
for the other data structures in a class.
I also fixed a problem where I accidentally used
hasExternalLexicalStorage() instead of
hasExternalVisibleStorage() to mark an
incomplete object.
llvm-svn: 164197
populate Clang ObjCInterfaceDecls with their
ivars, methods, and properties. The default
implementation does nothing. I have also made
sure that AppleObjCRuntimeV2 creates
ObjCInterfaceDecls that actually get queried
appropriately.
llvm-svn: 164164
the dynamic and static runtime class tables to
construct our isa table. This is putting the runtime
in contact with unrealized classes, which we need
to deal with in order to get accurate information.
That's the next piece of work.
<rdar://problem/10986023>
llvm-svn: 163957
This may (but shouldn't) break Linux (but I tested and it still worked on FreeBSD).
The same shell scripts are now used on Xcode and Makefiles, for generating
the SWIG bindings.
Some compatibility fixes were applied, too (python path, bash-isms, etc).
llvm-svn: 163912
When attaching on ARM hosted debuggers we were incorrectly setting the triple to "arm-apple-ios". This was happening because in the post attach code, we would lookup the process info through the platform, and if successful, we would get the architecture of the process. This code uses sysctl() calls, but we can only get the CPU type, not the subtype, so we would get ARM for CPU type and nothing for the cpu subtype, so this would map to "arm-apple-ios". I fixed the code to get the cpu subtype from "hw.cpusubtype" which is what we really want for ARM, and not the architecture is already correct. "add-dsym" then works like a charm. I also improved the command output when the architecture changes to show the entire triple instead of just the arch name.
llvm-svn: 163868
Partial fix for the above radar where we now resolve dsym mach-o files within the dSYM bundle when using "add-dsym" through the platform.
llvm-svn: 163676
information from the Objective-C runtime.
This patch takes the old AppleObjCSymbolVendor and
replaces it with an AppleObjCTypeVendor, which is
much more lightweight. Specifically, the SymbolVendor
needs to pretend that there is a backing symbol file
for the Types it vends, whereas a TypeVendor only
vends bare ClangASTTypes. These ClangASTTypes only
need to exist in an ASTContext.
The ClangASTSource now falls back to the runtime's
TypeVendor (if one exists) if the debug information
doesn't find a complete type for a particular
Objective-C interface. The runtime's TypeVendor
maintains an ASTContext full of types it knows about,
and re-uses the ISA-based type query information used
by the ValueObjects.
Currently, the runtime's TypeVendor doesn't provide
useful answers because we haven't yet implemented a
way to iterate across all ISAs contained in the target
process's runtime. That's the next step.
llvm-svn: 163651
it is unconditionally present now.
ObjectContainerBSDArchive::CreateInstance %z8.8x is not a valid printf arg specifier, %8.8zx would work
for size_t arg but this arg is addr_t. use %8.8llx and cast up to uint64_t.
ObjectFile::FindPlugin ditto.
DynamicRegisterInfo::SetRegisterInfo ifdef this function out if LLDB_DISABLE_PYTHON.
llvm-svn: 163599
Fixed an issue where if we call "Process::Destroy()" and the process is running, if we try to stop it and get "exited" back as the stop reason, we will still deliver the exited event.
llvm-svn: 163591
The attached patch fixes a problem with performing an attach from the SBTarget API on Linux (and other systems that use ProcessPOSIX).
When Process::Attach was called from SBTarget, it resulted in a call to a form of the DoAttachWithID function that wasn't implemented in ProcessPOSIX, and so it fell back to the default implementation (which just returns an error). It didn't seem necessary to use the attach_info parameter for this case, so I just implemented it as a call to the simpler version of the function.
In debugging this problem, I also found that SBTarget wasn't checking the return value from the Attach call, causing it to hang when the attach fails.
llvm-svn: 163399
The attached patch adds support for debugging 32-bit processes when running a 64-bit lldb on an x86_64 Linux system.
Making this work required two basic changes:
1) Getting lldb to report that it could debug 32-bit processes
2) Changing an assumption about how ptrace works when debugging cross-platform
For the first change, I took a conservative approach and only enabled this for x86_64 Linux platforms. It may be that the change I made in Host.cpp could be extended to other 64-bit Linux platforms, but I'm not familiar enough with the other platforms to know for sure.
For the second change, the Linux ProcessMonitor class was assuming that ptrace(PTRACE_[PEEK|POKE]DATA...) would read/write a "word" based on the child process word size. However, the ptrace documentation says that the "word" size read or written is "determined by the OS variant." I verified experimentally that when ptracing a 32-bit child from a 64-bit parent a 64-bit word is read or written.
llvm-svn: 163398
If the stopped event comes in with the Restarted bit set, don't try to hand that to the plans, but just return ShouldStop = false. There's nothing useful the plans can do, since the target is already running.
llvm-svn: 163244
on, basic inlined stepping works, including step-over of inlined functions. But for some as yet mysterious reason i386 debugging gets an
assert and dies immediately. So for now its off.
llvm-svn: 163044
Added the ability for OptionValueString objects to take flags. The only flag is currently for parsing escape sequences. Not the prompt string can have escape characters translate which will allow colors in the prompt.
Added functions to Args that will parse the escape sequences in a string, and also re-encode the escape sequences for display. This was looted from other parts of LLDB (the Debugger::FormatString() function).
llvm-svn: 163043
Added a fix for incorrect dynamic typing. Before when asking if a C++ class could be dynamic, we would answer yes for incomplete C++ classes. This turned out to have issues where if a class was not virtual, yet had its first ivar be an instance of a virtual class, we would incorrectly say that a class was virtual and we would downcast it to be a pointer to the first ivar. We now ask the class to complete itself prior to answering the question. We need to test the effects on memory of this change prior to submission. It is the safest and best fix, but it does have a potential downside of higher memory consumption.
llvm-svn: 163014
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
Fix a subtle ArchSpec::cores_match() logic issue which prevents the add-dsym command
to add a debug symbol file to one of the target's current modules.
llvm-svn: 162802
Add 'attach <pid>|<process-name>' command to lldb, as well as 'detach' which is an alias of 'process detach'.
Add two completion test cases for "attach" and "detach".
llvm-svn: 162573
Added code the initialize the register context in the OperatingSystemPython plug-in with the new PythonData classes, and added a test OperatingSystemPython module in lldb/examples/python/operating_system.py that we can use for testing.
llvm-svn: 162530
Previously we put a WatchpointSentry object within StopInfo.cpp to disable-and-then-enable the watchpoint itself
while we are performing the actions associated with the triggered watchpoint, which can cause the user-initiated
watchpoint disabling action to be negated.
Add a test case to verify that a watchpoint can be disabled during the callbacks.
llvm-svn: 162483
Added a new "interpreter" properties to encapsulate any properties for the command interpreter. Right now this contains only "expand-regex-aliases", so you can now enable (disabled by default) the echoing of the command that a regular expression alias expands to:
(lldb) b main
Breakpoint created: 1: name = 'main', locations = 1
Note that the expanded regular expression command wasn't shown by default. You can enable it if you want to:
(lldb) settings set interpreter.expand-regex-aliases true
(lldb) b main
breakpoint set --name 'main'
Breakpoint created: 1: name = 'main', locations = 1
Also enabled auto completion for enumeration option values (OptionValueEnumeration) and for boolean option values (OptionValueBoolean).
Fixed auto completion for settings names when nothing has been type (it should show all settings).
llvm-svn: 162418
particularly in the SBThread & SBFrame interfaces. Instead of filling the whole context & then getting
the API mutex, we now get only the target, acquire the API mutex from it, then fill out the rest of the
context. This removes a race condition where you get a ThreadSP, then wait on the API mutex while another
command Destroy's the Thread you've just gotten.
Also fixed the ExecutionContextRef::Get*SP calls so they don't return invalid objects.
Also fixed the ExecutionContext::Has*Scope calls so they don't claim to have a scope if the object representing
that scope has been destroyed.
Also fixed a think-o in Thread::IsValid which was causing it to return the opposite of the desired value.
<rdar://problem/11995490>
llvm-svn: 162401
- no setting auto completion
- very manual and error prone way of getting/setting variables
- tons of code duplication
- useless instance names for processes, threads
Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing".
llvm-svn: 162366
'add-dsym' (aka 'target symbols add') should display error messages when dsym file is not found
or the dsym uuid does not match any existing modules. Add TestAddDsymCommand.py test file.
llvm-svn: 162332
Watchpoint conditions were hitting watchpoint, smashing LLDB's stack.
Make sure watchpoint is properly disabled and subsequently enabled while performing watchpoint actions.
llvm-svn: 162322
when you want to find the caller's saved pc, you look up the return address
register and use that. On arm, for instance, this would be the contents of
the link register (lr).
If the eh_frame CIE defines an RA, record that fact in the UnwindPlan.
When we're finding a saved register, if it's the pc, lok for the location
of the return address register instead.
<rdar://problem/12062310>
llvm-svn: 162167
tread on the m_embedded_thread_input_reader_sp singleton maintained by the script interpreter.
Furthermore, use two additional slots under the script interpreter to store the PseudoTerminal and
the InputReaderSP pertaining to the embedded python interpreter -- resulted from the
ScriptInterpreterPython::ExecuteInterpreterLoop() call -- to facilitate separation from what is being
used by the PythonInputReaderManager instances.
llvm-svn: 162147
Add an lldb command line option to specify a core file: --core/-c.
For consistency, change the "target create" command to also use --core.
llvm-svn: 161993
do not take the sanpshot and forget about the stop info. It is possible that the variable expression has gone
out of scope, we'll revise the hit count due to the false alarms.
llvm-svn: 161892
return 0x0 as the read value instead of uninitialized
stack data so we get consistent behavior from the
emulator.
<rdar://problem/12058770>
llvm-svn: 161795
Record the snapshot of our watched value when the watchpoint is set or hit.
And report the old/new values when watchpoint is triggered. Add some test scenarios.
llvm-svn: 161785
Fixed an issue that could cause references the shared data for an object file to stay around longer than intended and could cause memory bloat when debugging multiple times.
llvm-svn: 161716
the expression returns nothing. There is now a
setting, "notify-void." When the user enables
that setting, lldb prints (void) if an expression's
result is void. Otherwise, lldb is silent.
<rdar://problem/11225150>
llvm-svn: 161600
require an AddressClass, which is useless at this
point since it already knows the distinction between
32-bit Thumb opcodes and 32-bit ARM opcodes.
llvm-svn: 161382
Use the built in demangler for Apple builds for now which has needed demangling fixes, and make the cxa_demangle.cpp use rtti in the Xcode project settings as it requires it be enabled.
llvm-svn: 161323
keep a shared pointer to their disassembler. This
is important for the LLVM-C disassembler because
it needs to lock its parent in order to disassemble
itself.
This means that every interface that returned a
Disassembler* needs to return a DisassemblerSP, so
that the instructions and any external owners share
the same reference count on the object. I changed
all clients to use this shared pointer, which also
plugged a few leaks.
<rdar://problem/12002822>
llvm-svn: 161123
Added new API to lldb::SBTypeMember for bitfields:
bool SBTypeMember::IsBitfield();
uint32_t SBTypeMember::GetBitfieldSizeInBits();
Also added new properties for easy access. Now SBTypeMember objects in python have a "fields" property for all type fields, "bases" for all direct bases, "vbases" for all virtual base classes and "members" for a combo of all three organized by bit offset. They all return a python list() of SBTypeMember objects. Usage:
(lldb) script
>>> t = lldb.target.FindFirstType("my_type")
>>> for field in t.fields:
... print field
>>> for vbase in t.vbases:
... print vbase
>>> for base in t.bases:
... print base
>>> for member in t.members:
... print member
Also added new "is_bitfield" property to the SBTypeMember objects that will return the result of SBTypeMember::IsBitfield(), and "bitfield_bit_size" which will return the result of SBTypeMember::GetBitfieldSizeInBits();
I also fixed "SBTypeMember::GetOffsetInBytes()" to return the correct byte offset.
llvm-svn: 161091
instructions, be sure to allocate new UnwindPlan::Row's each
time we push a row on to the UnwindPlan so we don't mutate
it any further.
(fallout from changing the UnwindPlan from having a vector
of Row's to having a vector of RowSP shared pointers.)
<rdar://problem/11997385>
llvm-svn: 161089
Objective-C method names when looking for functions
in the top level or a namespace. Method names should
only be found via FindExternalLexicalDecls.
<rdar://problem/11711679>
llvm-svn: 160907
Convert from calling Halt in the lldb Driver.cpp's input reader's sigint handler to sending this AsyncInterrupt so it can be handled in the
event loop.
If you are attaching and get an async interrupt, abort the attach attempt.
Also remember to destroy the process if get interrupted while attaching.
Getting this to work also required handing the eBroadcastBitInterrupt in a few more places in Process WaitForEvent & friends.
<rdar://problem/10792425>
llvm-svn: 160903
sel_getName() calls are generated for all Objective-C
selectors before static literals are moved to the
static allocation. This prevents errors of the form
Internal error [IRForTarget]: Couldn't change a static
reference to an Objective-C selector to a dynamic
reference
<rdar://problem/11331906>
llvm-svn: 160887
information if we're not stopped. This could try to read registers
etc when the process is still running and debug builds of lldb would
assert down in GDBRemoteRegisterContext.cpp ReadRegisterBytes because
we couldn't get the sequence mutex for talking to the remote system.
Non-debug builds would just silently fail when doing this.
<rdar://problem/11941758>
llvm-svn: 160829
artificially reject stepping out of a function you stepped into when stepping through an inlined range.
Also fill in the target in the symbol context we make up for the inlined stepping range in ThreadPlanStepOut.
<rdar://problem/11765912>
llvm-svn: 160794
Jason Molenda