Summary:
WebAssembly is unique among upstream targets in that it does not at
any point use physical registers to store values. Instead, it uses
virtual registers to model positions in its value stack. This means
that some target-independent lowering activities that would use
physical registers need to use virtual registers instead for
WebAssembly and similar downstream targets. This CL generalizes the
existing `usesPhysRegsForPEI` lowering hook to
`usesPhysRegsForValues` in preparation for using it in more places.
One such place is in InstrEmitter for instructions that have variadic
defs. On register machines, it only makes sense for these defs to be
physical registers, but for WebAssembly they must be virtual registers
like any other values. This CL changes InstrEmitter to check the new
target lowering hook to determine whether variadic defs should be
physical or virtual registers.
These changes are necessary to support a generalized CALL instruction
for WebAssembly that is capable of returning an arbitrary number of
arguments. Fully implementing that instruction will require additional
changes that are described in comments here but left for a follow up
commit.
Reviewers: aheejin, dschuff, qcolombet
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71484
These names have been changed from CamelCase to camelCase, but there were
many places (comments mostly) that still used the old names.
This change is NFC.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, nicolasvasilache
Subscribers: hiraditya, jfb, mehdi_amini, rriddle, jpienaar, burmako, shauheen, antiagainst, csigg, arpith-jacob, mgester, lucyrfox, herhut, liufengdb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73041
The ACLE distinguishes between the following addressing modes for gather
loads:
* "scalar base, vector offset", and
* "vector base, scalar offset".
For the "vector base, scalar offset" case, the
`int_aarch64_sve_ld1_gather_imm` intrinsic was added in 79f2422d.
Currently, that intrinsic assumes that the scalar offset is passed as an
immediate. As a result, it does not cater for cases where scalar offset
is stored in a register.
In this patch `int_aarch64_sve_ld1_gather_imm` is extended so that all
cases are covered:
* `int_aarch64_sve_ld1_gather_imm` is renamed as
`int_aarch64_sve_ld1_gather_scalar_offset`
* new DAG combine rules are added for GLD1_IMM for scenarios where the
offset is a non-immediate scalar or an out-of-range immediate
* sve-intrinsics-gather-loads-vector-base.ll is renamed as
sve-intrinsics-gather-loads-vector-base-imm-offset.ll
* sve-intrinsics-gather-loads-vector-base-scalar-offset.ll is added to test
file for non-immediate offsets
Similar changes are made for scatter store intrinsics.
Reviewed By: sdesmalen, efriedma
Differential Revision: https://reviews.llvm.org/D71773
Summary: Vectorized loop processes VFxUF number of elements in one iteration thus total number of iterations decreases proportionally. In addition epilog loop may not have more than VFxUF - 1 iterations. This patch updates profile information accordingly.
Reviewers: hsaito, Ayal, fhahn, reames, silvas, dcaballe, SjoerdMeijer, mkuper, DaniilSuchkov
Reviewed By: Ayal, DaniilSuchkov
Subscribers: fedor.sergeev, hiraditya, rkruppe, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67905
This moves `rewriteLoopExitValues()` from IndVarSimplify to LoopUtils thus
making it a generic loop utility function. This allows to rewrite loop exit
values by just calling this function without running the whole IndVarSimplify
pass.
We use this in D72714 to rematerialise the iteration count in exit blocks, so
that we can clean-up loop update expressions inside the hardware-loops later.
Differential Revision: https://reviews.llvm.org/D72602
This adds Post inc variants of the VLD2/4 and VST2/4 instructions in
MVE. It uses the same mechanism/nodes as Neon, transforming the
intrinsic+add pair into a ARMISD::VLD2_UPD, which gets selected to a
post-inc instruction. The code to do that is mostly taken from the
existing Neon code, but simplified as less variants are needed.
It also fills in some getTgtMemIntrinsic for the arm.mve.vld2/4
instrinsics, which allow the nodes to have MMO's, calculated as the full
length to the memory being loaded/stored.
Differential Revision: https://reviews.llvm.org/D71194
StackColoring::remapInstructions() remaps MachineOperand frame index (e.g. %stack.1 -> %stack.0)
but does not remap FixedStackPseudoSourceValue frame index (e.g. store 4 into %stack.1.ap2.i.i)
referenced by MachineMemoryOperand.
This can cause an assertion failure when LiveDebugValues references a dead stack object.
It is difficult to craft a test case. -g, va_copy and stack-coloring are required.
I can only reproduce it on ppc32.
Except AMDGPU/R600RegisterInfo (a bunch of MIR tests seem to have
problems), every target overrides it with true. PostMachineScheduler
requires livein information. Not providing it can cause assertion
failures in ScheduleDAGInstrs::addSchedBarrierDeps().
The MaterializationResponsibility::defineMaterializing method allows clients to
add new definitions that are in the process of being materialized to the JIT.
This patch adds support to defineMaterializing for symbols with weak linkage
where the new definitions may be rejected if another materializer concurrently
defines the same symbol. If a weak symbol is rejected it will not be added to
the MaterializationResponsibility's responsibility set. Clients can check for
membership in the responsibility set via the
MaterializationResponsibility::getSymbols() method before resolving any
such weak symbols.
This patch also adds code to RTDyldObjectLinkingLayer to tag COFF comdat symbols
introduced during codegen as weak, on the assumption that these are COFF comdat
constants. This fixes http://llvm.org/PR40074.
This change has 2 components:
Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.
WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase
The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.
This is a reland of rG3a05c3969c18 with fixes for the expensive-checks
and Windows builds
Differential Revision: https://reviews.llvm.org/D71681
Summary:
Detect a run of memory tagging instructions for adjacent stack frame slots,
and replace them with a shorter instruction sequence
* replace STG + STG with ST2G
* replace STGloop + STGloop with STGloop
This code needs to run when stack slot offsets are already known, but before
FrameIndex operands in STG instructions are eliminated; that's the
reason for the new hook in PrologueEpilogue.
This change modifies STGloop and STZGloop pseudos to take the size as an
immediate integer operand, and adds _untied variants of those pseudos
that are allowed to take the base address as a FI operand. This is needed to
simplify recognizing an STGloop instruction as operating on a stack slot
post-regalloc.
This improves memtag code size by ~0.25%, and it looks like an additional ~0.1%
is possible by rearranging the stack frame such that consecutive STG
instructions reference adjacent slots (patch pending).
Reviewers: pcc, ostannard
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70286
Static method MemoryDependenceResults::getLoadLoadClobberFullWidthSize
does not have or use any info specific to MemoryDependenceResults.
Move it to its only user: VNCoercion.
This is an alternative to the continous mode that was implemented in
D68351. This mode relies on padding and the ability to mmap a file over
the existing mapping which is generally only available on POSIX systems
and isn't suitable for other platforms.
This change instead introduces the ability to relocate counters at
runtime using a level of indirection. On every counter access, we add a
bias to the counter address. This bias is stored in a symbol that's
provided by the profile runtime and is initially set to zero, meaning no
relocation. The runtime can mmap the profile into memory at abitrary
location, and set bias to the offset between the original and the new
counter location, at which point every subsequent counter access will be
to the new location, which allows updating profile directly akin to the
continous mode.
The advantage of this implementation is that doesn't require any special
OS support. The disadvantage is the extra overhead due to additional
instructions required for each counter access (overhead both in terms of
binary size and performance) plus duplication of counters (i.e. one copy
in the binary itself and another copy that's mmapped).
Differential Revision: https://reviews.llvm.org/D69740
[this re-applies c0176916a4
with the correct commit message and phabricator link]
This addresses point 1 of PR44213.
https://bugs.llvm.org/show_bug.cgi?id=44213
The DW_AT_LLVM_sysroot attribute is used for Clang module debug info,
to allow LLDB to import a Clang module from source. Currently it is
part of each DW_TAG_module, however, it is the same for all modules in
a compile unit. It is more efficient and less ambiguous to store it
once in the DW_TAG_compile_unit.
This should have no effect on DWARF consumers other than LLDB.
Differential Revision: https://reviews.llvm.org/D71732
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
Introduce a method to walk through use-def chains to decide whether
it's possible to remove a given instruction and its users. These
instructions are then stored in a set until the end of the transform
when they're erased. This is now used to perform checks on the
iteration count (LoopDec chain), element count (VCTP chain) and the
possibly redundant iteration count.
As well as being able to remove chains of instructions, we know also
check that the sub feeding the vctp is producing the expected value.
Differential Revision: https://reviews.llvm.org/D71837
Summary:
Several SVE intrinsics with immediate arguments (including those
added by D70253 & D70437) do not use the ImmArg property.
This patch adds ImmArg<Op> where required and changes
the appropriate patterns which match the immediates.
Reviewers: efriedma, sdesmalen, andwar, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72612
This include file was created in October and has a "using namespace llvm". This seems to get exposed to other include files and finally onto cpp files. While this somewhat okay for llvm itself, its bad for other projects that use llvm as a library and includes a header file that picks this up. This was found by ISPC which has some class names at gloal scope with the same names as LLVM.
It looks like RISCV accidentally became dependent on this. I fixed it by reordering some includes in the RISCV code, but maybe we want to change the TableGenEmitter to put "namespace llvm {" in the generated file instead? But we probably want to do the simplest thing first so we can merge it to 10.0.
Differential Revision: https://reviews.llvm.org/D72895
Summary:
In the DFAPacketizer we copy the Transitions array
into a map in order to later access the transitions
based on a "Current State/Action" pair as a key.
This map lives in the Automaton object used by the DFAPacketizer.
It is never changed during the life of the object after
having been created during the creation of the Automaton
itself.
This map creation can make the creation of a DFAPacketizer
quite expensive if the target contains a considerable
amount of transition states.
Considering that TableGen already generates a
sorted list of transitions by State/Action pairs
we could just use that directly in our Automaton
and search entries with std::lower_bound instead of copying
it in a map and paying the execution time and memory cost.
Reviewers: jmolloy, ThomasRaoux
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72682
This is (more?) usable by GDB pretty printers and seems nicer to write.
There's one tricky caveat that in C++14 (LLVM's codebase today) the
static constexpr member declaration is not a definition - so odr use of
this constant requires an out of line definition, which won't be
provided (that'd make all these trait classes more annoyidng/expensive
to maintain). But the use of this constant in the library implementation
is/should always be in a non-odr context - only two unit tests needed to
be touched to cope with this/avoid odr using these constants.
Based on/expanded from D72590 by Christian Sigg.
This change has 2 components:
Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.
WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase
The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.
Differential Revision: https://reviews.llvm.org/D71681
This was assuming the narrow target was the source type. Respect the
requested type when these don't match by using intermediate
merges. This avoids producing very wide, illegal shift expansions.
This was dropping the invariant metadata on dead argument loads, so
they weren't deleted.
Atomics still need to be fixed the same way. Also, apparently store
was never preserving dereferencable which should also be fixed.
This reverts commit 3f3017e because there's a failure on peel-loop-nests.ll
with LLVM_ENABLE_EXPENSIVE_CHECKS on.
Differential Revision: https://reviews.llvm.org/D70304
There are a few global (cl::opt) controls that enable optional
behavior in GVN. Introduce GVNOptions that provide corresponding
per-pass instance controls.
That will allow to use GVN multiple times in pipeline each time
with different settings.
Reviewers: asbirlea, rnk, reames, skatkov, fhahn
Reviewed By: fhahn
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72732
Summary:
The old pass manager separated speed optimization and size optimization
levels into two unsigned values. Coallescing both in an enum in the new
pass manager may lead to unintentional casts and comparisons.
In particular, taking a look at how the loop unroll passes were constructed
previously, the Os/Oz are now (==new pass manager) treated just like O3,
likely unintentionally.
This change disallows raw comparisons between optimization levels, to
avoid such unintended effects. As an effect, the O{s|z} behavior changes
for loop unrolling and loop unroll and jam, matching O2 rather than O3.
The change also parameterizes the threshold values used for loop
unrolling, primarily to aid testing.
Reviewers: tejohnson, davidxl
Reviewed By: tejohnson
Subscribers: zzheng, ychen, mehdi_amini, hiraditya, steven_wu, dexonsmith, dang, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72547
Summary:
This commits is a rework of the patch in
https://reviews.llvm.org/D67572.
The rework was requested to prevent out-of-tree performance regression
when vectorizing out-of-tree IR intrinsics. The vectorization of such
intrinsics is enquired via the static function `isTLIScalarize`. For
detail see the discussion in https://reviews.llvm.org/D67572.
Reviewers: uabelho, fhahn, sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72734
llvm.memset intrinsics do only write memory, but are missing
IntrWriteMem, so they doesNotReadMemory() returns false for them.
The test change is due to the test checking the fn attribute ids at the
call sites, which got bumped up due to a new combination with writeonly
appearing in the test file.
Reviewers: jdoerfert, reames, efriedma, nlopes, lebedev.ri
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D72789
The assume intrinsic is intentionally marked as may reading/writing
memory, to avoid passes moving them around. When flattening the CFG
for predicated blocks, we have to drop the assume calls, as they
are control-flow dependent.
There are some cases where we can do better (when control flow is
preserved), but that is follow-up work.
Fixes PR43620.
Reviewers: hsaito, rengolin, dcaballe, Ayal
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D68814
Summary:
This change implements the expansion in two parts:
- Add a utility function emitAMDGPUPrintfCall() in LLVM.
- Invoke the above function from Clang CodeGen, when processing a HIP
program for the AMDGPU target.
The printf expansion has undefined behaviour if the format string is
not a compile-time constant. As a sufficient condition, the HIP
ToolChain now emits -Werror=format-nonliteral.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D71365
This removes the default values of the arguments. The only caller,
DWARFDebugAranges::construct(), provides all three parameters.
Differential Revision: https://reviews.llvm.org/D72757
This will provide a more consistent view to codegen for these
attributes. The current system is somewhat awkward, and the fields in
TargetOptions are reset based on the command line flag if the
attribute isn't set. By forcing these attributes with the flag, there
can never be an inconsistency in the behavior if code directly
inspects the attribute on the function without considering the command
line flags.
Suppose an inline instance has hot total sample count but 0 entry count, and
it is an indirect call target. If the indirect call has no other call target
and inline instance associated with it and it is promoted, currently the
conditional branch generated by indirect call promotion will have invalid
branch profile which is !{!"branch_weights", i32 0, i32 0} -- because the
entry count of the promoted target is 0 and the total entry count of all
targets is also 0. This caused a SEGV in Control Height Reduction and may
cause problem in other passes.
Function entry count of an inline instance is computed by a heuristic --
using either the sample of the starting line or starting inner inline
instance. The patch changes the heuristic a little bit so that when total
sample count is larger than 0, the computed entry count will be at least 1.
Then the new branch profile will be !{!"branch_weights", i32 1, i32 0}.
Differential Revision: https://reviews.llvm.org/D72790
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
Append this to the existing target-features attribute on the function.
Some flags ignore existing attributes, and some overwrite them. Move
towards consistently respecting existing attributes if present. Since
target features act as a state machine on their own, append to the
function attribute. The backend default added feature list, function
attributes, and -mattr will all be appended together, and the later
features can individually toggle the earlier settings.
I'm mildly worried about potentially reordering exp/exp_done with
IntrWriteMem on the intrinsic.
Requires hacking out the illegal type on SI, so manually select that
case during lowering.
Summary:
In July 21 2010 `llvm::NamedMDNode` was refactored such that it would no
longer subclass `llvm::Value`:
https://github.com/llvm/llvm-project/commit/2637cc1a38d7336ea30caf
As part of this change, a map type from metadata names to their named
metadata, `llvm::MDSymbolTable`, was deleted. In its place, the type
of member `llvm::Module::NamedMDSymTab` was changed, from
`llvm::MDSymbolTable` to `void *`. The underlying memory allocations
for this pointer were changed to `new StringMap<NamedMDNode *>()`.
However, as far as I can tell, there's no need for obscuring the
underlying type being pointed to by the `void *`, and no need for
static casts from `void *` to `StringMap`. In fact, I don't think
there's a need for explicit calls to `new` and `delete` at all.
This commit changes `NamedMDSymTab` from a pointer to a reference, which
automatically couples its lifetime with the lifetime of its owning
`llvm::Module` instance, thus removing the explicit calls to `new` and
`delete` in the `llvm::Module` constructor and destructor. It also
changes the type from `void *` to a newly defined `NamedMDSymTabType`,
and removes the static casts.
Test Plan:
An ASAN-enabled build and run of `check-all` succeeds with this change
(aside from some tests that always fail for me in ASAN for some reason,
such as `check-clang` `SemaTemplate/stack-exhaustion.cpp`).
Reviewers: aprantl, dblaikie, chandlerc, pcc, echristo
Reviewed By: dblaikie
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72812
It appears to be rather useful when analyzing Loops with multiple
deoptimizing exits, perhaps merged ones.
For now it is used in LoopPredication, will be adding more uses
in other loop passes.
Reviewers: asbirlea, fhahn, skatkov, spatel, reames
Reviewed By: reames
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72754
Summary:
InlineResult is used both in APIs assessing whether a call site is
inlinable (e.g. llvm::isInlineViable) as well as in the function
inlining utility (llvm::InlineFunction). It means slightly different
things (can/should inlining happen, vs did it happen), and the
implicit casting may introduce ambiguity (casting from 'false' in
InlineFunction will default a message about hight costs,
which is incorrect here).
The change renames the type to a more generic name, and disables
implicit constructors.
Reviewers: eraman, davidxl
Reviewed By: davidxl
Subscribers: kerbowa, arsenm, jvesely, nhaehnle, eraman, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72744
Factor out the logic needed to update debug locations contained within
MD_loop metadata.
This refactor is preparation for a future change that also needs to
rewrite MD_loop metadata.
rdar://45507940
This reverts D53469, which changed llvm's DWARF emission to emit
DW_AT_call_return_pc as a function-local offset. Such an encoding is not
compatible with post-link block re-ordering tools and isn't standards-
compliant.
In addition to reverting back to the original DW_AT_call_return_pc
encoding, teach lldb how to fix up DW_AT_call_return_pc when the address
comes from an object file pointed-to by a debug map. While doing this I
noticed that lldb's support for tail calls that cross a DSO/object file
boundary wasn't covered, so I added tests for that. This latter case
exercises the newly added return PC fixup.
The dsymutil changes in this patch were originally included in D49887:
the associated test should be sufficient to test DW_AT_call_return_pc
encoding purely on the llvm side.
Differential Revision: https://reviews.llvm.org/D72489
This patch imports constant variables even when they can't be internalized
(which results in promotion). This offers some extra constant folding
opportunities.
Differential revision: https://reviews.llvm.org/D70404
Summary:
Current peeling implementation bails out in case of loop nests.
The patch introduces a field in TargetTransformInfo structure that
certain targets can use to relax the constraints if it's
profitable (disabled by default).
Also additional option is added to enable peeling manually for
experimenting and testing purposes.
Reviewers: fhahn, lebedev.ri, xbolva00
Reviewed By: xbolva00
Subscribers: xbolva00, hiraditya, zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D70304
This patch makes the target triple available via the LLJIT interface, and moves
the IRTransformLayer from LLLazyJIT down into LLJIT. Together these changes make
it easier to use the lazyReexports utility with LLJIT, and to apply IR
transforms to code as it is compiled in LLJIT (rather than requiring transforms
to be applied manually before code is added). An code example is added in
llvm/examples/LLJITExamples/LLJITWithLazyReexports
A bug in the existing implementation meant that lazyReexports would not work if
the aliased name differed from the alias's name, i.e. all lazy reexports had to
be of the form (lib1, name) -> (lib2, name). This patch fixes the issue by
capturing the alias's name in the NotifyResolved callback. To simplify this
capture, and the LazyCallThroughManager code in general, the NotifyResolved
callback is updated to use llvm::unique_function rather than a custom class.
No test case yet: This can only be tested at runtime, and the only in-tree
client (lli) always uses aliases with matching names. I will add a new LLJIT
example shortly that will directly test the lazyReexports API and the
non-trivial alias use case.
Summary:
This patch implements `formatv()` formatting for `dwarf::LineNumberOps`
and makes use of it for the `llvm-dwarfdump --debug-line` dump.
Previously, unknown line number standard opcodes would lead to undefined
behaviour. The code would attempt to format the data pointer of an empty
`StringRef` (a null pointer) using `%s`. According to the description
for `format()`, use of that interface carries the "risk of `printf`".
Passing a null pointer in place of an array to a C library function
results in undefined behaviour.
Reviewers: jhenderson, daltenty, stevewan
Reviewed By: jhenderson
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72369
Bitcast only really applies between scalars and vectors. Implement as
an unmerge and remerge. The test needs to tolerate failure since one
of the unmerges currently fails to legalize.
Note: this is a reland with a trivial 2 lines fix in ELFState<ELFT>::writeSectionContent.
It adds a check similar to ones we already have for other sections to fix the case revealed
by bots, like http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/60744.
The encoded sequence of Elf*_Relr entries in a SHT_RELR section looks
like [ AAAAAAAA BBBBBBB1 BBBBBBB1 ... AAAAAAAA BBBBBB1 ... ]
i.e. start with an address, followed by any number of bitmaps. The address
entry encodes 1 relocation. The subsequent bitmap entries encode up to 63(31)
relocations each, at subsequent offsets following the last address entry.
More information is here:
https://github.com/llvm-mirror/llvm/blob/master/lib/Object/ELF.cpp#L272
This patch adds a support for these sections.
Differential revision: https://reviews.llvm.org/D71872
The encoded sequence of Elf*_Relr entries in a SHT_RELR section looks
like [ AAAAAAAA BBBBBBB1 BBBBBBB1 ... AAAAAAAA BBBBBB1 ... ]
i.e. start with an address, followed by any number of bitmaps. The address
entry encodes 1 relocation. The subsequent bitmap entries encode up to 63(31)
relocations each, at subsequent offsets following the last address entry.
More information is here:
https://github.com/llvm-mirror/llvm/blob/master/lib/Object/ELF.cpp#L272
This patch adds a support for these sections.
Differential revision: https://reviews.llvm.org/D71872
Summary:
This patch introduces `AAValueConstantRange`, which answers a possible range for integer value in a specific program point.
One of the motivations is propagating existing `range` metadata. (I think we need to change the situation that `range` metadata cannot be put to Argument).
The state is a tuple of `ConstantRange` and it is initialized to (known, assumed) = ([-∞, +∞], empty).
Currently, AAValueConstantRange is created in `getAssumedConstant` method when `AAValueSimplify` returns `nullptr`(worst state).
Supported
- BinaryOperator(add, sub, ...)
- CmpInst(icmp eq, ...)
- !range metadata
`AAValueConstantRange` is not intended to extend to polyhedral range value analysis.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: phosek, davezarzycki, baziotis, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71620
All the callers of this function will be ScheduleDAGMI from the
MachineScheduler. This allows us to use the extra info available in
ScheduleDAGMI without resorting to awkward casts.
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: merge_guards_bot, luismarques, smeenai, ldionne, lenary, s.egerton, pzheng, sameer.abuasal, MaskRay, wuzish, echristo, Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
This ports the MergeFunctions pass to the NewPM. This was rather
straightforward, as no analyses are used.
Additionally MergeFunctions needs to be conditionally enabled in
the PassBuilder, but I left that part out of this patch.
Differential Revision: https://reviews.llvm.org/D72537
Summary:
Ensure that we can internalize values produced from two rounds of
promotion.
Note that this cannot happen currently via clang, but in other use cases
such as the Rust compiler which does a first round of ThinLTO on library
code, producing bitcode, and a second round on the final binary.
In particular this can happen if a function is exported and promoted,
ending up with a ".llvm.${hash}" suffix, and then goes through a round
of optimization creating an internal switch table expansion variable
that is internal and contains the promoted name of the enclosing
function. This variable will be promoted in the second round of ThinLTO
if @foo is imported again, and therefore ends up with two
".llvm.${hash}" suffixes. Only the final one should be stripped when
consulting the index to locate the summary.
Reviewers: wmi
Subscribers: mehdi_amini, inglorion, hiraditya, JDevlieghere, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72711
If scc_iterator::ReplaceNode is inserting a new entry in the map,
rather than replacing an existing entry, the possibility of growing
the map could cause a failure. This change safely implements the
insertion.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D72469
Summary:
This is a slight cleanup, to use multiclasses to avoid the duplication between
the different atomic intrinsic definitions. The produced intrinsics are
unchanged, they're just generated in a more succinct way.
Reviewers: asb, luismarques, jrtc27
Reviewed By: luismarques, jrtc27
Subscribers: Jim, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, jfb, PkmX, jocewei, psnobl, benna, s.egerton, pzheng, sameer.abuasal, apazos, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71777
We're planning to remove the shufflemask operand from ShuffleVectorInst
(D72467); fix GlobalISel so it doesn't depend on that Constant.
The change to prelegalizercombiner-shuffle-vector.mir happens because
the input contains a literal "-1" in the mask (so the parser/verifier
weren't really handling it properly). We now treat it as equivalent to
"undef" in all contexts.
Differential Revision: https://reviews.llvm.org/D72663
Summary:
This is the next portion of patches for dsymutil.
Create DwarfEmitter interface to generate all debug info tables.
Put DwarfEmitter into DwarfLinker library and make tools/dsymutil/DwarfStreamer
to be child of DwarfEmitter.
It passes check-all testing. MD5 checksum for clang .dSYM bundle matches
for the dsymutil with/without that patch.
Reviewers: JDevlieghere, friss, dblaikie, aprantl
Reviewed By: JDevlieghere
Subscribers: merge_guards_bot, hiraditya, thegameg, probinson, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D72476
The lto::Config object saved on the global LTO object should not be
updated by any of the LTO backends. Otherwise we could run into
interference between threads utilizing it. Motivated by some proposed
changes that would have caused it to get modified in the ThinLTO
backends.
Summary:
be15dfa88f broke GlobalISel's usage of getSetCCInverse() which currently
appears to be limited to our out-of-tree backend. GlobalISel doesn't use
EVT's and isn't able to derive them from the information it has as it
doesn't distinguish between integer and floating point types (that
distinction is made by operations rather than values). Bring back the
bool version of getSetCCInverse() in a way that doesn't break the intent
of be15dfa88f but also allows GlobalISel to continue using it.
Reviewers: spatel, bogner, arichardson
Reviewed By: arichardson
Subscribers: rovka, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72309
This patch adds a new size function to the base DataExtractor class,
which removes the need for the DWARFDataExtractor size function.
It is unclear why DWARFDataExtractor's size function returned zero in
some circumstances (i.e. when it is constructed without a section, and
with a different data source instead), so that behaviour has changed.
The old behaviour could cause an assertion in the debug line parser, as
the size did not reflect the actual data available, and could be lower
than the current offset being parsed.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D72337
which is the default TLS model for non-PIC objects. This allows large/
many thread local variables or a compact/fast code in an executable.
Specification is same as that of GCC. For example, the code model
option precedes the TLS size option.
TLS access models other than local-exec are not changed. It means
supoort of the large code model is only in the local exec TLS model.
Patch By KAWASHIMA Takahiro (kawashima-fj <t-kawashima@fujitsu.com>)
Reviewers: dmgreen, mstorsjo, t.p.northover, peter.smith, ostannard
Reviewd By: peter.smith
Committed by: peter.smith
Differential Revision: https://reviews.llvm.org/D71688
The argument is llvm::null() everywhere except llvm::errs() in
llvm-objdump in -DLLVM_ENABLE_ASSERTIONS=On builds. It is used by no
target but X86 in -DLLVM_ENABLE_ASSERTIONS=On builds.
If we ever have the needs to add verbose log to disassemblers, we can
record log with a member function, instead of passing it around as an
argument.
This patch allows for handling a failure inside a CrashRecoveryContext in the same way as the global exception/signal handler. A failure will have the same side-effect, such as cleanup of temporarty file, printing callstack, calling relevant signal handlers, and finally returning an exception code. This is an optional feature, disabled by default.
This is a support patch for D69825.
Differential Revision: https://reviews.llvm.org/D70568
Summary:
This always just used the same libcall as unordered, but the comparison predicate was different. This change appears to have been made when targets were given the ability to override the predicates. Before that they were hardcoded into the type legalizer. At that time we never inverted predicates and we handled ugt/ult/uge/ule compares by emitting an unordered check ORed with a ogt/olt/oge/ole checks. So only ordered needed an inverted predicate. Later ugt/ult/uge/ule were optimized to only call a single libcall and invert the compare.
This patch removes the ordered entries and just uses the inverting logic that is now present. This removes some odd things in both the Mips and WebAssembly code.
Reviewers: efriedma, ABataev, uweigand, cameron.mcinally, kpn
Reviewed By: efriedma
Subscribers: dschuff, sdardis, sbc100, arichardson, jgravelle-google, kristof.beyls, hiraditya, aheejin, sunfish, atanasyan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72536
Add a predicate to MCInstDesc that allows tools to determine whether an
instruction authenticates a pointer. This can be used by diagnostic
tools to hint at pointer authentication failures.
Differential Revision: https://reviews.llvm.org/D70329
rdar://55089604
The Linux kernel uses -fpatchable-function-entry to implement DYNAMIC_FTRACE_WITH_REGS
for arm64 and parisc. GCC 8 implemented
-fpatchable-function-entry, which can be seen as a generalized form of
-mnop-mcount. The N,M form (function entry points before the Mth NOP) is
currently only used by parisc.
This patch adds N,0 support to AArch64 codegen. N is represented as the
function attribute "patchable-function-entry". We will use a different
function attribute for M, if we decide to implement it.
The patch reuses the existing patchable-function pass, and
TargetOpcode::PATCHABLE_FUNCTION_ENTER which is currently used by XRay.
When the integrated assembler is used, __patchable_function_entries will
be created for each text section with the SHF_LINK_ORDER flag to prevent
--gc-sections (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93197) and
COMDAT (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93195) issues.
Retrospectively, __patchable_function_entries should use a PC-relative
relocation type to avoid the SHF_WRITE flag and dynamic relocations.
"patchable-function-entry"'s interaction with Branch Target
Identification is still unclear (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92424 for GCC discussions).
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D72215
In D71841 we inverted the sense of the SDNode-level flag to ensure all nodes
default to potentially raising FP exceptions unless otherwise specified --
i.e. if we forget to propagate the flag somewhere, the effect is now only
lost performance, not incorrect code.
However, the related flag at the MI level still defaults to nodes not raising
FP exceptions unless otherwise specified. To be fully on the (conservatively)
safe side, we should invert that flag as well.
This patch does so by replacing MIFlag::FPExcept with MIFlag::NoFPExcept.
(Note that this does also introduce an incompatible change in the MIR format.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D72466
Update the IRBuilder to generate constrained FP comparisons in
CreateFCmp when IsFPConstrained is true, similar to the other
places in the IRBuilder.
Also, add a new CreateFCmpS to emit signaling FP comparisons,
and use it in clang where comparisons are supposed to be signaling
(currently, only when emitting code for the <, <=, >, >= operators).
Note that there is currently no way to add fast-math flags to a
constrained FP comparison, since this is implemented as an intrinsic
call that returns a boolean type, and FMF are only allowed for calls
returning a floating-point type. However, given the discussion around
https://bugs.llvm.org/show_bug.cgi?id=42179, it seems that FCmp itself
really shouldn't have any FMF either, so this is probably OK.
Reviewed by: craig.topper
Differential Revision: https://reviews.llvm.org/D71467
down to pass builder in ltobackend.
Currently CodeGenOpts like UnrollLoops/VectorizeLoop/VectorizeSLP in clang
are not passed down to pass builder in ltobackend when new pass manager is
used. This is inconsistent with the behavior when new pass manager is used
and thinlto is not used. Such inconsistency causes slp vectorization pass
not being enabled in ltobackend for O3 + thinlto right now. This patch
fixes that.
Differential Revision: https://reviews.llvm.org/D72386
For arguments that are not expected to be materialized with
G_CONSTANT, this was emitting predicates which could never match. It
was first adding a meaningless LLT check, which would always fail due
to the operand not being a register.
Infer the cases where a literal should check for an immediate operand,
instead of a register This avoids needing to invent a special way of
representing timm literal values.
Also handle immediate arguments in GIM_CheckLiteralInt. The comments
stated it handled isImm() and isCImm(), but that wasn't really true.
This unblocks work on the selection of all of the complicated AMDGPU
intrinsics in future commits.
The current implementation assumes there is an instruction associated
with the transform, but this is not the case for
timm/TargetConstant/immarg values. These transforms should directly
operate on a specific MachineOperand in the source
instruction. TableGen would assert if you attempted to define an
equivalent GISDNodeXFormEquiv using timm when it failed to find the
instruction matcher.
Specially recognize SDNodeXForms on timm, and pass the operand index
to the render function.
Ideally this would be a separate render function type that looks like
void renderFoo(MachineInstrBuilder, const MachineOperand&), but this
proved to be somewhat mechanically painful. Add an optional operand
index which will only be passed if the transform should only look at
the one source operand.
Theoretically it would also be possible to only ever pass the
MachineOperand, and the existing renderers would check the parent. I
think that would be somewhat ugly for the standard usage which may
want to inspect other operands, and I also think MachineOperand should
eventually not carry a pointer to the parent instruction.
Use it in one sample pattern. This isn't a great example, since the
transform exists to satisfy DAG type constraints. This could also be
avoided by just changing the MachineInstr's arbitrary choice of
operand type from i16 to i32. Other patterns have nontrivial uses, but
this serves as the simplest example.
One flaw this still has is if you try to use an SDNodeXForm defined
for imm, but the source pattern uses timm, you still see the "Failed
to lookup instruction" assert. However, there is now a way to avoid
it.
Only PPC seems to be using it, and only checks some simple cases and
doesn't distinguish between FP. Just switch to using LLT to simplify
use from GlobalISel.
As an intermediate step, some TLI functions can be converted to using
LLT instead of MVT. Move this somewhere out of GlobalISel so DAG
functions can use these.
Summary:
Extend D71677 to apply to all branch-target operands, rather than special-casing call instructions.
Also add a regression test for llvm.org/PR44272, since this finishes fixing it.
Reviewers: thakis, rnk
Reviewed By: thakis
Subscribers: merge_guards_bot, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72417
pass.
Summary: This patch changes LoopUnrollAndJamPass to a function pass, and
keeps the loops traversal order same as defined in
FunctionToLoopPassAdaptor LoopPassManager.h.
The next patch will change the loop traversal to outer to inner order,
so more loops can be transform.
Discussion in llvm-dev mailing list:
https://groups.google.com/forum/#!topic/llvm-dev/LF4rUjkVI2g
Reviewer: dmgreen, jdoerfert, Meinersbur, kbarton, bmahjour, etiotto
Reviewed By: dmgreen
Subscribers: hiraditya, zzheng, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D72230
A lot of the IR-level intrinsics we've been defining for MVE recently
accidentally had `props = []` instead of `props = [IntrNoMem]`, so
that optimization would have been overcautious about reordering them.
All the affected cases were due to instantiating the multiclasses
`MVEPredicated` and `MVEMXPredicated` without filling in the `props`
parameter, because I //thought// I remembered having set the defaults
in those multiclasses to `[IntrNoMem]`. In fact I hadn't done that.
Now I have.
(The IR intrinsics that //do// read and write memory are all
explicitly marked as `[IntrReadMem]` or `[IntrWriteMem]` already, so
they will override these defaults.)
Summary:
This patch registers the 've' target: the NEC SX-Aurora TSUBASA Vector Engine.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D69103
`APFLoat::convertFromString` returns `Expected` result, which must be
"checked" if the LLVM_ENABLE_ABI_BREAKING_CHECKS preprocessor flag is
set.
To mark an `Expected` result as "checked" we must consume the `Error`
within.
In many cases, we are only interested in knowing if an error occured,
without the need to examine the error info. This is achieved, easily,
with the `errorToBool()` API.
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Patch by Peng Guo
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
When we replace instructions with unreachable we delete instructions. We
now avoid dangling pointers to those deleted instructions in the
`ToBeChangedToUnreachableInsts` set. Other modification collections
might need to be updated in the future as well.
Summary:
This allows the use of '-target powerpcspe-unknown-linux-gnu' or
'powerpcspe-unknown-freebsd' to be used, instead of
'-target powerpc-unknown-linux-gnu -mspe'.
Reviewed By: dim
Differential Revision: https://reviews.llvm.org/D72014
MachineVerifier::visitMachineFunctionAfter() is extended to check the
live-through case for live-in lists. This is only done for registers without
aliases and that are neither allocatable or reserved, such as the SystemZ::CC
register.
The MachineVerifier earlier only catched the case of a live-in use without an
entry in the live-in list (as "using an undefined physical register").
A comment in LivePhysRegs.h has been added stating a guarantee that
addLiveOuts() can be trusted for a full register both before and after
register allocation.
Review: Quentin Colombet
Differential Revision: https://reviews.llvm.org/D68267
Summary:
Detect a run of memory tagging instructions for adjacent stack frame slots,
and replace them with a shorter instruction sequence
* replace STG + STG with ST2G
* replace STGloop + STGloop with STGloop
This code needs to run when stack slot offsets are already known, but before
FrameIndex operands in STG instructions are eliminated; that's the
reason for the new hook in PrologueEpilogue.
This change modifies STGloop and STZGloop pseudos to take the size as an
immediate integer operand, and base address as a FI operand when
possible. This is needed to simplify recognizing an STGloop instruction
as operating on a stack slot post-regalloc.
This improves memtag code size by ~0.25%, and it looks like an additional ~0.1%
is possible by rearranging the stack frame such that consecutive STG
instructions reference adjacent slots (patch pending).
Reviewers: pcc, ostannard
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70286
As discussed heavily in the original review (D70157), there's a need for the compiler to be able to selective suppress padding (either nop or prefix) to respect assumptions about the meaning of labels and instructions in generated code.
Rather than wait for syntax to be finalized - which appears to be a very slow process - this patch focuses on the compiler use case and *only* worries about the integrated assembler. To my knowledge, this covers all cases mentioned to date for clang/JIT support.
For testing purposes, I wired it up so that if the integrated assembler was using autopadding for branch alignment (e.g. enabled at command line) then the textual assembly output would contain a comment for each location where padding was enabled or disabled. This seemed like the least painful choice overall.
Note that the result of this patch effective disables the jcc errata mitigation for many constructs (statepoints, implicit null checks, xray, etc...) which is non ideal. It is at least *correct* and should allow us to enable the mitigation for the compiler. Once that's done, and a few other items are worked through, we probably want to come back to this an explore a bundling based approach instead so that we can pad instructions while keeping labels in the right place.
Differential Revision: https://reviews.llvm.org/D72303
This batch of intrinsics fills in all the shift instructions that take
a variable shift distance in a register, instead of an immediate. Some
of these instructions take a single shift distance in a scalar
register and apply it to all lanes; others take a vector of per-lane
distances.
These instructions are all basically one family, varying in whether
they saturate out-of-range values, and whether they round when bits
are shifted off the bottom. I've implemented them at the IR level by a
much smaller family of IR intrinsics, which take flag parameters to
indicate saturating and/or rounding (along with the usual one to
specify signed/unsigned integers).
An oddity is that all of them are //left// shift instructions – but if
you pass a negative shift count, they'll shift right. So the vector
shift distances are always vectors of //signed// integers, regardless
of whether you're considering the other input vector to be of signed
or unsigned. Also, even the simplest `vshlq` instruction in this
family (neither saturating nor rounding) has to be implemented as an
IR intrinsic, because the ordinary LLVM IR `shl` operation would
consider an out-of-range shift count to be undefined behavior.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72329
This batch of intrinsics covers two sets of immediate shift
instructions, which have in common that they only overwrite part of
their output register and so they need an extra input giving its
previous value.
The VSLI and VSRI instructions shift each lane of the input vector
left or right just as if they were normal immediate VSHL/VSHR, but
then they only overwrite the output bits that correspond to actual
shifted bits of the input. So VSLI will leave the low n bits of each
output lane unchanged, and VSRI the same with the top n bits.
The V[Q][R]SHR[U]N family are all narrowing shifts: they take an input
vector of 2n-bit integers, shift each lane right by a constant, and
then narrowing the shifted result to only n bits. So they only
overwrite half of the n-bit lanes in the output register, and the B/T
suffix indicates whether it's the bottom or top half of each 2n-bit
lane.
I've implemented the whole of the latter family using a single IR
intrinsic `vshrn`, which takes a lot of i32 parameters indicating
which instruction it expands to (by specifying signedness of the input
and output types, whether it saturates and/or rounds, etc).
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72328
Summary:
This patch adds intrinsics and ISelDAG nodes for
signed and unsigned fixed-point division:
llvm.sdiv.fix.*
llvm.udiv.fix.*
These intrinsics perform scaled division on two
integers or vectors of integers. They are required
for the implementation of the Embedded-C fixed-point
arithmetic in Clang.
Patch by: ebevhan
Reviewers: bjope, leonardchan, efriedma, craig.topper
Reviewed By: craig.topper
Subscribers: Ka-Ka, ilya, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70007
This patch moves `InPQueue` into function arguments instead of template
arguments of `releaseNode`, which is a cleaner approach.
Differential Revision: https://reviews.llvm.org/D72125
Summary:
This patch relands D71271. The problem with D71271 is that it has cyclic dependency:
CodeGen->AsmPrinter->DebugInfoDWARF->CodeGen. To avoid cyclic dependency this patch
puts implementation for DWARFOptimizer into separate library: lib/DWARFLinker.
Thus the difference between this patch and D71271 is in that DWARFOptimizer renamed into
DWARFLinker and it`s files are put into lib/DWARFLinker.
Reviewers: JDevlieghere, friss, dblaikie, aprantl
Reviewed By: JDevlieghere
Subscribers: thegameg, merge_guards_bot, probinson, mgorny, hiraditya, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D71839
Apple's CPUs are called A7-A13 in official communication, occasionally with
weird suffixes which we probably don't need to care about. This adds each one
and describes its features. It also switches the default CPU to the canonical
name for Cyclone, but leaves legacy support in so that existing bitcode still
compiles.
Summary:
Remove the restrictions that preventing "asm goto" from returning non-void
values. The values returned by "asm goto" are only valid on the "fallthrough"
path.
Reviewers: jyknight, nickdesaulniers, hfinkel
Reviewed By: jyknight, nickdesaulniers
Subscribers: rsmith, hiraditya, llvm-commits, cfe-commits, craig.topper, rnk
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69876
Summary:
Every powerpc64le platform uses elfv2.
For powerpc64, the environments "elfv1" and "elfv2" were added for
FreeBSD ELFv1->ELFv2 migration in D61950. FreeBSD developers have
decided to use OS versions to select ABI, and no one is relying on the
environments.
Also use elfv2 on powerpc64-linux-musl.
Users can always use -mabi=elfv1 and -mabi=elfv2 to override the default
ABI.
Reviewed By: adalava
Differential Revision: https://reviews.llvm.org/D72352
Summary:
GIMatchTree's job is to build a decision tree by zipping all the
GIMatchDag's together.
Each DAG is added to the tree builder as a leaf and partitioners are used
to subdivide each node until there are no more partitioners to apply. At
this point, the code generator is responsible for testing any untested
predicates and following any unvisited traversals (there shouldn't be any
of the latter as the getVRegDef partitioner handles them all).
Note that the leaves don't always fit into partitions cleanly and the
partitions may overlap as a result. This is resolved by cloning the leaf
into every partition it belongs to. One example of this is a rule that can
match one of N opcodes. The leaf for this rule would end up in N partitions
when processed by the opcode partitioner. A similar example is the
getVRegDef partitioner where having rules (add $a, $b), and (add ($a, $b), $c)
will result in the former being in the partition for successfully
following the vreg-def and failing to do so as it doesn't care which
happens.
Depends on D69151
Fixed the issues with the windows bots which were caused by stdout/stderr
interleaving.
Reviewers: bogner, volkan
Reviewed By: volkan
Subscribers: lkail, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69152
Don't overwrite existing target-cpu attributes.
I've often found the replacement behavior annoying, and this is
inconsistent with how the fast math command line flags interact with
the function attributes.
Does not yet change target-features, since I think that should behave
as a concatenation.
Up until now, the arguments to `fusedMultiplyAdd` are passed by
reference. We must save the `Addend` value on the beginning of the
function, before we modify `this`, as they may be the same reference.
To fix this, we now pass the `addend` parameter of `multiplySignificand`
by value (instead of by-ref), and have a default value of zero.
Fix PR44051.
Differential Revision: https://reviews.llvm.org/D70422
Summary:
This is an effort to allowing external libraries register their own pass instrumentation during their llvmGetPassPluginInfo() calls.
By exposing this through the added getPIC(), now a pass writer can do something like this:
```
extern "C" ::llvm::PassPluginLibraryInfo LLVM_ATTRIBUTE_WEAK
llvmGetPassPluginInfo() {
return {
..,
[](llvm::PassBuilder &PB) {
PB.getPIC()->registerAfterPassCallback(move(f));
}
};
}
```
Reviewers: chandlerc, philip.pfaffe, fedor.sergeev
Reviewed By: fedor.sergeev
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71086
printInst prints a branch/call instruction as `b offset` (there are many
variants on various targets) instead of `b address`.
It is a convention to use address instead of offset in most external
symbolizers/disassemblers. This difference makes `llvm-objdump -d`
output unsatisfactory.
Add `uint64_t Address` to printInst(), so that it can pass the argument to
printInstruction(). `raw_ostream &OS` is moved to the last to be
consistent with other print* methods.
The next step is to pass `Address` to printInstruction() (generated by
tablegen from the instruction set description). We can gradually migrate
targets to print addresses instead of offsets.
In any case, downstream projects which don't know `Address` can pass 0 as
the argument.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D72172
This would complain about invalid legalizer rules otherwise.
Mark some operations as unsupported for AMDGPU. This currently seems
to produce the same legalize error as when no rules are defined, but
eventually this should produce a proper user facing error.
A random set of attributes are implemented by llc/opt forcing the
string attributes on the IR functions before processing anything. This
would not happen for MIR functions, which have not yet been created at
this point.
Use a callback in the MIR parser, purely to avoid dealing with the
ugliness that the command line flags are in a .inc file, and would
require allowing access to these flags from multiple places (either
from the MIR parser directly, or a new utility pass to implement these
flags). It would probably be better to cleanup the flag handling into
a separate library.
This is in preparation for treating more command line flags with a
corresponding function attribute in a more uniform way. The fast math
flags in particular have a messy system where the command line flag
sets the behavior from a function attribute if present, and otherwise
the command line flag. This means if any other pass tries to inspect
the function attributes directly, it will be inconsistent with the
intended behavior. This is also inconsistent with the current behavior
of -mcpu and -mattr, which overwrites any pre-existing function
attributes. I would like to move this to consistenly have the command
line flags not overwrite any pre-existing attributes, and to always
ensure the command line flags are consistent with the function
attributes.
Summary:
Running an end-to-end test last week I noticed that a lot of the ACLE
intrinsics that operate differently on vectors of signed and unsigned
integers were ending up generating the signed version of the
instruction unconditionally. This is because the IR intrinsics had no
way to distinguish signed from unsigned: the LLVM type system just
calls them both `v8i16` (or whatever), so you need either separate
intrinsics for signed and unsigned, or a flag parameter that tells
ISel which one to choose.
This patch fixes all the problems of that kind that I've noticed, by
adding an i32 flag parameter to many of the IR intrinsics which is set
to 1 for unsigned (matching the existing practice in cases where we
got it right), and conditioning all the isel patterns on that flag. So
the fundamental change is in `IntrinsicsARM.td`, changing the
low-level IR intrinsics API; there are knock-on changes in
`arm_mve.td` (adjusting code gen for the ACLE intrinsics to use the
modified API) and in `ARMInstrMVE.td` (adjusting isel to expect the
new unsigned flags). The rest of this patch is boringly updating tests.
Reviewers: dmgreen, miyuki, MarkMurrayARM
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72270
Summary:
Make `AAMDNodes`' `getAAMetadata()` and `setAAMetadata()` to take `!tbaa.struct`
into account as well as `!tbaa`. This impacts llvm.org/pr42022.
This is a temprorary fix needed to keep `!tbaa.struct` tag by SROA pass.
New field `TBAAStruct` should be deleted when `!tbaa` tag replaces `!tbaa.struct`.
Merging two `!tbaa.struct`'s to one is conservatively considered to be `nullptr`
(giving `MayAlias`) -- this could be enhanced, but relying on the said future
replacement.
Reviewers: RKSimon, spatel, vporpo
Subscribers: hiraditya, kosarev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70924
sizeof(MCFragment) does not change, but some if its subclasses do, e.g.
on a 64-bit platform,
sizeof(MCEncodedFragment) decreases from 64 to 56,
sizeof(MCDataFragment) decreases from 224 to 216.
This simplifies the generic interface and also makes SHF_ARM_PURECODE
more robust (fixes a TODO). Inspecting MCDataFragment contents covers
more cases than MCObjectStreamer::EmitBytes.
SCEVExpander modifies the underlying function so it is more suitable in
Transforms/Utils, rather than Analysis. This allows using other
transform utils in SCEVExpander.
Reviewers: sanjoy.google, efriedma, reames
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D71537
All the windows bots are failing match-tree.td and there's no obvious cause that
I can see. It's not just the %p formatting problem. My best guess is that
there's an ordering issue too but I'll need further information to figure that
out. Revert while I'm investigating.
This reverts commit 64f1bb5cd2 and 77d4b5f5fe
Static archives contain object files which contain sections pointing to
external remark files.
When static archives are shipped without the remark files, dsymutil
shouldn't generate an error.
Instead, generate a warning to inform the user that remarks for that
library won't be available in the .dSYM.
Summary:
GIMatchTree's job is to build a decision tree by zipping all the
GIMatchDag's together.
Each DAG is added to the tree builder as a leaf and partitioners are used
to subdivide each node until there are no more partitioners to apply. At
this point, the code generator is responsible for testing any untested
predicates and following any unvisited traversals (there shouldn't be any
of the latter as the getVRegDef partitioner handles them all).
Note that the leaves don't always fit into partitions cleanly and the
partitions may overlap as a result. This is resolved by cloning the leaf
into every partition it belongs to. One example of this is a rule that can
match one of N opcodes. The leaf for this rule would end up in N partitions
when processed by the opcode partitioner. A similar example is the
getVRegDef partitioner where having rules (add $a, $b), and (add ($a, $b), $c)
will result in the former being in the partition for successfully
following the vreg-def and failing to do so as it doesn't care which
happens.
Depends on D69151
Reviewers: bogner, volkan
Reviewed By: volkan
Subscribers: lkail, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69152
AMDGPU can't unambiguously go back from the selected instruction
register class to the register bank without knowing if this was used
in a boolean context.
Summary:
I used this information to motivate splitting up the Intrinsic::ID enum
(5d986953c8) and adding a key method to
clang::Sema (586f65d31f) which saved a
fair amount of object file size.
Example output for clang.pdb:
Top 10 types responsible for the most TPI input bytes:
index total bytes count size
0x3890: 8,671,220 = 1,805 * 4,804
0xE13BE: 5,634,720 = 252 * 22,360
0x6874C: 5,181,600 = 408 * 12,700
0x2A1F: 4,520,528 = 1,574 * 2,872
0x64BFF: 4,024,020 = 469 * 8,580
0x1123: 4,012,020 = 2,157 * 1,860
0x6952: 3,753,792 = 912 * 4,116
0xC16F: 3,630,888 = 633 * 5,736
0x69DD: 3,601,160 = 985 * 3,656
0x678D: 3,577,904 = 319 * 11,216
In this case, we can see that record 0x3890 is responsible for ~8MB of
total object file size for objects in clang.
The user can then use llvm-pdbutil to find out what the record is:
$ llvm-pdbutil dump -types -type-index 0x3890
Types (TPI Stream)
============================================================
Showing 1 records.
0x3890 | LF_FIELDLIST [size = 4804]
- LF_STMEMBER [name = `WORDTYPE_MAX`, type = 0x1001, attrs = public]
- LF_MEMBER [name = `U`, Type = 0x37F0, offset = 0, attrs = private]
- LF_MEMBER [name = `BitWidth`, Type = 0x0075 (unsigned), offset = 8, attrs = private]
- LF_METHOD [name = `APInt`, # overloads = 8, overload list = 0x3805]
...
In this case, we can see that these are members of the APInt class,
which is emitted in 1805 object files.
The next largest type is ASTContext:
$ llvm-pdbutil dump -types -type-index 0xE13BE bin/clang.pdb
0xE13BE | LF_FIELDLIST [size = 22360]
- LF_BCLASS
type = 0x653EA, offset = 0, attrs = public
- LF_MEMBER [name = `Types`, Type = 0x653EB, offset = 8, attrs = private]
- LF_MEMBER [name = `ExtQualNodes`, Type = 0x653EC, offset = 24, attrs = private]
- LF_MEMBER [name = `ComplexTypes`, Type = 0x653ED, offset = 48, attrs = private]
- LF_MEMBER [name = `PointerTypes`, Type = 0x653EE, offset = 72, attrs = private]
...
ASTContext only appears 252 times, but the list of members is long, and
must be repeated everywhere it is used.
This was the output before I split Intrinsic::ID:
Top 10 types responsible for the most TPI input:
0x686C: 69,823,920 = 1,070 * 65,256
0x686D: 69,819,640 = 1,070 * 65,252
0x686E: 69,819,640 = 1,070 * 65,252
0x686B: 16,371,000 = 1,070 * 15,300
...
These records were all lists of intrinsic enums.
Reviewers: MaskRay, ruiu
Subscribers: mgrang, zturner, thakis, hans, akhuang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71437
Rather than handling zlib handling manually, use `find_package` from CMake
to find zlib properly. Use this to normalize the `LLVM_ENABLE_ZLIB`,
`HAVE_ZLIB`, `HAVE_ZLIB_H`. Furthermore, require zlib if `LLVM_ENABLE_ZLIB` is
set to `YES`, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This restores 68a235d07f,
e6c7ed6d21. The problem with the windows
bot is a need for clearing the cache.
This patch fixes an inconsistency where we were using std::function in
some places and function_ref in others to pass around the error handling
callback.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D71762
This reverts commit 68a235d07f.
This commit broke the clang-x64-windows-msvc build bot and a follow-up
commit did not fix it. Reverting to fix the bot.
The NoFPExcept bit in SDNodeFlags currently defaults to true, unlike all
other such flags. This is a problem, because it implies that all code that
transforms SDNodes without copying flags can introduce a correctness bug,
not just a missed optimization.
This patch changes the default to false. This makes it necessary to move
setting the (No)FPExcept flag for constrained intrinsics from the
visitConstrainedIntrinsic routine to the generic visit routine at the
place where the other flags are set, or else the intersectFlagsWith
call would erase the NoFPExcept flag again.
In order to avoid making non-strict FP code worse, whenever
SelectionDAGISel::SelectCodeCommon matches on a set of orignal nodes
none of which can raise FP exceptions, it will preserve this property
on all results nodes generated, by setting the NoFPExcept flag on
those result nodes that would otherwise be considered as raising
an FP exception.
To check whether or not an SD node should be considered as raising
an FP exception, the following logic applies:
- For machine nodes, check the mayRaiseFPException property of
the underlying MI instruction
- For regular nodes, check isStrictFPOpcode
- For target nodes, check a newly introduced isTargetStrictFPOpcode
The latter is implemented by reserving a range of target opcodes,
similarly to how memory opcodes are identified. (Note that there a
bit of a quirk in identifying target nodes that are both memory nodes
and strict FP nodes. To simplify the logic, right now all target memory
nodes are automatically also considered strict FP nodes -- this could
be fixed by adding one more range.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71841
There's quite a lot of references to Polly in the LLVM CMake codebase. However
the registration pattern used by Polly could be useful to other external
projects: thanks to that mechanism it would be possible to develop LLVM
extension without touching the LLVM code base.
This patch has two effects:
1. Remove all code specific to Polly in the llvm/clang codebase, replaicing it
with a generic mechanism
2. Provide a generic mechanism to register compiler extensions.
A compiler extension is similar to a pass plugin, with the notable difference
that the compiler extension can be configured to be built dynamically (like
plugins) or statically (like regular passes).
As a result, people willing to add extra passes to clang/opt can do it using a
separate code repo, but still have their pass be linked in clang/opt as built-in
passes.
Differential Revision: https://reviews.llvm.org/D61446
Summary:
Currently 32 bit unpacked offsets are passed as nxv2i64. However, as
pointed out in https://reviews.llvm.org/D71074, using nxv2i32 instead
would improve consistency with:
* how other arguments are treated
* how scatter stores are implemented
This patch makes sure that 32 bit unpacked offsets are passes as nxv2i32
instead of nxv2i64.
Reviewers: sdesmalen, efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71724
A series of patches beginning with https://reviews.llvm.org/D71898
propose to add an implementation of the coroutine passes to the new pass
manager. As part of these changes, the coroutine passes that implement
the legacy pass manager interface are renamed, to `<PassName>Legacy`.
This mirrors similar changes that have been made to many other passes in
LLVM as they've been transitioned to support both old and new pass
managers.
This commit splits out the renaming portion of that patch and commits it
in advance as an NFC (no functional change intended) commit. It renames:
* `CoroEarly` => `CoroEarlyLegacy`
* `CoroSplit` => `CoroSplitLegacy`
* `CoroElide` => `CoroElideLegacy`
* `CoroCleanup` => `CoroCleanupLegacy`
Rather than handling zlib handling manually, use `find_package` from CMake
to find zlib properly. Use this to normalize the `LLVM_ENABLE_ZLIB`,
`HAVE_ZLIB`, `HAVE_ZLIB_H`. Furthermore, require zlib if `LLVM_ENABLE_ZLIB` is
set to `YES`, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
The 'SchedBoundary::releaseNode' is merely invoked for releasing the Top/Bottom root nodes.
However, 'SchedBoundary::releasePending' uses its same logic to check if the Pending queue
has any releasable SUnit.
It is possible to slightly modify the body of the two, allowing re-use of the former ('releaseNode')
in the latter.
Patch by Lorenzo Casalino <lorenzo.casalino93@gmail.com>
Reviewers: MatzeB, fhahn, atrick
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D65506
clang/lib/CodeGen/CodeGenModule performs the -mpie-copy-relocations
check and sets dso_local on applicable global variables. We don't need
to duplicate the work in TargetMachine shouldAssumeDSOLocal.
Verified that -mpie-copy-relocations can still emit PC relative
relocations for external variable accesses.
clang -target x86_64 -fpie -mpie-copy-relocations -c => R_X86_64_PC32
clang -target aarch64 -fpie -mpie-copy-relocations -c => R_AARCH64_ADR_PREL_PG_HI21+R_AARCH64_LDST64_ABS_LO12_NC
This patch introduces `AAValueConstantRange`, which answers a possible range for integer value in a specific program point.
One of the motivations is propagating existing `range` metadata. (I think we need to change the situation that `range` metadata cannot be put to Argument).
The state is a tuple of `ConstantRange` and it is initialized to (known, assumed) = ([-∞, +∞], empty).
Currently, AAValueConstantRange is created when AAValueSimplify cannot
simplify the value.
Supported
- BinaryOperator(add, sub, ...)
- CmpInst(icmp eq, ...)
- !range metadata
`AAValueConstantRange` is not intended to extend to polyhedral range value analysis.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D71620
As part of the Attributor manifest we want to change the signature of
functions. This patch introduces a fairly generic interface to do so.
As a first, very simple, use case, we remove unused arguments. A second
use case, pointer privatization, will be committed with this patch as
well.
A lot of the code and ideas are taken from argument promotion and we
run all argument promotion tests through this framework as well.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D68765
This is the second step after D67871 to make use of abstract call sites.
In this patch the argument we associate with a abstract call site
argument can be the one in the callback callee instead of the one in the
callback broker.
Caveat: We cannot allow no-alias arguments for problematic callbacks:
As described in [1], adding no-alias (or restrict) to arguments could
break synchronization as the synchronization effect, e.g., a barrier,
does not "alias" with the pointer anymore. This disables no-alias
annotation for potentially problematic arguments until we implement the
fix described in [1].
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D68008
[1] Compiler Optimizations for OpenMP, J. Doerfert and H. Finkel,
International Workshop on OpenMP 2018,
http://compilers.cs.uni-saarland.de/people/doerfert/par_opt18.pdf
This allows us to clean up some places that were peeking through
the MERGE_VALUES node after the call. By returning the SDValues
directly, we can clean that up.
Unfortunately, there are several call sites in AMDGPU that wanted
the MERGE_VALUES and now need to create their own.
This allows to use the OpenMPIRBuilder for parallel regions. Code was
extracted from D61953 and adapted to work with the new version (D70109).
All but one feature should be supported. An update of this patch will
provide test coverage and privatization other than shared.
Reviewed By: fghanim
Differential Revision: https://reviews.llvm.org/D70290
An `omp cancel parallel` needs to be emitted by the OpenMPIRBuilder if
the `parallel` was emitted by the OpenMPIRBuilder. This patch makes
this possible. The cancel logic is shared with the cancel barriers.
Testing is done via unit tests and the clang cancel_codegen.cpp file
once D70290 lands.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D71948
Summary:
Amend MS offset operator implementation, to more closely fit with its MS counterpart:
1. InlineAsm: evaluate non-local source entities to their (address) location
2. Provide a mean with which one may acquire the address of an assembly label via MS syntax, rather than yielding a memory reference (i.e. "offset asm_label" and "$asm_label" should be synonymous
3. address PR32530
Based on http://llvm.org/D37461
Fix broken test where the break appears unrelated.
- Set up appropriate memory-input rewrites for variable references.
- Intel-dialect assembly printing now correctly handles addresses by adding "offset".
- Pass offsets as immediate operands (using "r" constraint for offsets of locals).
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D71436
D56351 (included in LLVM 8.0.0) introduced "frame-pointer". All tests
which use "no-frame-pointer-elim" or "no-frame-pointer-elim-non-leaf"
have been migrated to use "frame-pointer".
Implement UpgradeFramePointerAttributes to upgrade the two obsoleted
function attributes for bitcode. Their semantics are ignored.
Differential Revision: https://reviews.llvm.org/D71863
G_BITREVERSE is generated from llvm.bitreverse.<type> intrinsics,
clang genrates these intrinsics from __builtin_bitreverse32 and
__builtin_bitreverse64.
Add lower and narrowscalar for G_BITREVERSE.
Lower G_BITREVERSE on MIPS32.
Recommit notes:
Introduce temporary variables in order to make sure
instructions get inserted into MachineFunction in same order
regardless of compiler used to build llvm.
Differential Revision: https://reviews.llvm.org/D71363
G_BITREVERSE is generated from llvm.bitreverse.<type> intrinsics,
clang genrates these intrinsics from __builtin_bitreverse32 and
__builtin_bitreverse64.
Add lower and narrowscalar for G_BITREVERSE.
Lower G_BITREVERSE on MIPS32.
Differential Revision: https://reviews.llvm.org/D71363
G_BSWAP is generated from llvm.bswap.<type> intrinsics, clang genrates
these intrinsics from __builtin_bswap32 and __builtin_bswap64.
Add lower and narrowscalar for G_BSWAP.
Lower G_BSWAP on MIPS32, select G_BSWAP on MIPS32 revision 2 and later.
Differential Revision: https://reviews.llvm.org/D71362
Summary: This patch makes `AAValueSimplify` use `changeUsesAfterManifest` in `manifest`. This will invoke simple folding after the manifest.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71972
This allows us to delete InlineAsm::Constraint_i workarounds in
SelectionDAGISel::SelectInlineAsmMemoryOperand overrides and
TargetLowering::getInlineAsmMemConstraint overrides.
They were introduced to X86 in r237517 to prevent crashes for
constraints like "=*imr". They were later copied to other targets.
A branch is considered UB if it depends on an undefined / uninitialized value.
At this point this handles simple UB branches in the form: `br i1 undef, ...`
We query `AAValueSimplify` to get a value for the branch condition, so the branch
can be more complicated than just: `br i1 undef, ...`.
Patch By: Stefanos Baziotis (@baziotis)
Reviewers: jdoerfert, sstefan1, uenoku
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D71799
* "If found then M with be non-NULL" should be "will be non-NULL".
* The documentation examples (1) and (2) declare and use a variable
`MyNode *M`, but examples (3) and (4) switch midway to using a
variable named `N`. Unify the examples to all use `M`.
* The examples demonstrate the use of member functions of
`FoldingSet`, but (3) and (4) invoke these as if they were free
functions. Modify them to call member functions on the `MyFoldingSet`
object constructed in the code above example (1).
Summary:
[DA] Move common code in checkSrcSubscript and checkDstSubscript to a
new function checkSubscript. This avoids duplicate code and possible
out of sync in the future.
Reviewers: sebpop, jmolloy, reames
Reviewed By: sebpop
Subscribers: bmahjour, hiraditya, llvm-commits, amehsan
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71087
Patch by zhongduo.
Summary: Calling `changeToUnreachable` in `manifest` from different places might cause really unpredictable problems. As other deleting functions are doing, we need to change these instructions after all `manifest`.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71910
This removes the OpenMPProcBindClauseKind enum in favor of
llvm::omp::ProcBindKind which lives in OpenMPConstants.h and was
introduced in D70109.
No change in behavior is expected.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D70289
This patch combines the `emitParallel` logic prototyped in D61953 with
the OpenMPIRBuilder (D69785) and introduces `CreateParallel`.
Reviewed By: fghanim
Differential Revision: https://reviews.llvm.org/D70109
As a permanent and generic solution to the problem of variable
finalization (destructors, lastprivate, ...), this patch introduces the
finalization stack. The objects on the stack describe (1) the
(structured) regions the OpenMP-IR-Builder is currently constructing,
(2) if these are cancellable, and (3) the callback that will perform the
finalization (=cleanup) when necessary.
As the finalization can be necessary multiple times, at different source
locations, the callback takes the position at which code is currently
generated. This position will also encode the destination of the "region
exit" block *iff* the finalization call was issues for a region
generated by the OpenMPIRBuilder. For regions generated through the old
Clang OpenMP code geneneration, the "region exit" is determined by Clang
inside the finalization call instead (see getOMPCancelDestination).
As a first user, the parallel + cancel barrier interaction is changed.
In contrast to the temporary solution before, the barrier generation in
Clang does not need to be aware of the "CancelDestination" block.
Instead, the finalization callback is and, as described above, later
even that one does not need to be.
D70109 will be updated to use this scheme.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D70258
_Eventually_, this attribute will be assigned to a function if it
contains undefined behavior. As a first small step, I tried to make it
loop through the load instructions in a function (eventually, the plan
is to check if a load instructions causes undefined behavior, because
e.g. dereferences a null pointer - Also eventually, this won't happen in
initialize() but in updateImpl()).
Patch By: Stefanos Baziotis (@baziotis)
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D71435
and "[Support] Try to fix bot failure after 8ddcd1dc26"
This reverts commits f70f180148 and 8ddcd1dc26 as this was breaking the
MacOS build, which doesn't support thread_local.
Commit d77ae1552f
("[DebugInfo] Support to emit debugInfo for extern variables")
added deebugInfo for extern variables for BPF target.
The commit is reverted by 891e25b02d
as the committed tests using %clang instead of %clang_cc1 causing
test failed in certain scenarios as reported by Reid Kleckner.
This patch fixed the tests by using %clang_cc1.
Differential Revision: https://reviews.llvm.org/D71818
Summary:
This is documented as the appropriate template modifier for call operands.
Fixes PR44272, and adds a regression test.
Also adds support for operand modifiers in Intel-style inline assembly.
Reviewers: rnk
Reviewed By: rnk
Subscribers: merge_guards_bot, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71677
Extends DWARF expression language to express locals/globals locations. (via
target-index operands atm) (possible variants are: non-virtual registers
or address spaces)
The WebAssemblyExplicitLocals can replace virtual registers to targertindex
operand type at the time when WebAssembly backend introduces
{get,set,tee}_local instead of corresponding virtual registers.
Reviewed By: aprantl, dschuff
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D52634
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
WARNING: If you're looking at this patch because you're looking for a full
performace mitigation of the Intel JCC Erratum, this is not it!
This is a preliminary patch on the patch towards mitigating the performance
regressions caused by Intel's microcode update for Jump Conditional Code
Erratum. For context, see:
https://www.intel.com/content/www/us/en/support/articles/000055650.html
The patch adds the required assembler infrastructure and command line options
needed to exercise the logic for INTERNAL TESTING. These are NOT public flags,
and should not be used for anything other than LLVM's own testing/debugging
purposes. They are likely to change both in spelling and meaning.
WARNING: This patch is knowingly incorrect in some cornercases. We need, and
do not yet provide, a mechanism to selective enable/disable the padding.
Conversation on this will continue in parellel with work on extending this
infrastructure to support prefix padding.
The goal here is to have the assembler align specific instructions such that
they neither cross or end at a 32 byte boundary. The impacted instructions are:
a. Conditional jump.
b. Fused conditional jump.
c. Unconditional jump.
d. Indirect jump.
e. Ret.
f. Call.
The new options for llvm-mc are:
-x86-align-branch-boundary=NUM aligns branches within NUM byte boundary.
-x86-align-branch=TYPE[+TYPE...] specifies types of branches to align.
A new MCFragment type, MCBoundaryAlignFragment, is added, which may emit
NOP to align the fused/unfused branch.
alignBranchesBegin inserts MCBoundaryAlignFragment before instructions,
alignBranchesEnd marks the end of the branch to be aligned,
relaxBoundaryAlign grows or shrinks sizes of NOP to align the target branch.
Nop padding is disabled when the instruction may be rewritten by the linker,
such as TLS Call.
Process Note: I am landing a patch by skan as it has been LGTMed, and
continuing to iterate on the review is simply slowing us down at this point.
We can and will continue to iterate in tree.
Patch By: skan
Differential Revision: https://reviews.llvm.org/D70157
Summary: Replace the integer immediate intrisics with splat vector variants so they can be applied as optimizations for the C/C++ intrinsics.
Reviewers: sdesmalen, huntergr, rengolin, efriedma, c-rhodes, mgudim, kmclaughlin
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits, amehsan
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71614
In general SVE intrinsics are considered predicated and merging
with everything else having suitable decoration. For predicated
zeroing operations (like the predicate logical instructions) we
use the "_z" suffix. After this change all intrinsics use their
expected names (i.e. orr instead of or and eor instead of xor).
I've removed intrinsics and patterns for condition code setting
instructions as that data is not returned as part of the intrinsic.
The expectation is to ask for a cc flag explicitly.
For example:
a = and_z(pg, p1, p2)
cc = ptest_<flag>(pg, a)
With the code generator expected to use "s" variants of instructions
when available.
Differential Revision: https://reviews.llvm.org/D71715
Recommit 23c28c4043 (reverted in
dcb48f50bd) with a fix for an assert
"Request for a fixed size on a scalable object" being triggered in
`LowerSVEIntrinsicEXT`. The fix is to call `getKnownMinSize` on the
TypeSize object.
1) Fix an issue with the incorrect value being used for the number of
elements being passed to [d|w]lstp. We were trying to check that
the value was available at LoopStart, but this doesn't consider
that the last instruction in the block could also define the
register. Two helpers have been added to RDA for this.
2) Insert some code to now try to move the element count def or the
insertion point so that we can perform more tail predication.
3) Related to (1), the same off-by-one could prevent us from
generating a low-overhead loop when a mov lr could have been
the last instruction in the block.
4) Fix up some instruction attributes so that not all the
low-overhead loop instructions are labelled as branches and
terminators - as this is not true for dls/dlstp.
Differential Revision: https://reviews.llvm.org/D71609
Recommit after making the same API change in non-x86 targets. This has been build for all targets, and tested for effected ones. Why the difference? Because my disk filled up when I tried make check for all.
For auto-padding assembler support, we'll need to bundle the label with the instructions (nops or call sequences) so that they don't get separated. This just rearranges the code to make the upcoming change more obvious.
This just updates an IRBuilder interface to take Functions instead of
Values so the type can be derived, and fixes some callsites in Clang to
call the updated API.
as it causes a layering violation/dependency cycle:
llvm/lib/CodeGen/AsmPrinter/DwarfDebug.cpp -> llvm/DebugInfo/DWARF/DWARFExpression.h
llvm/include/llvm/DebugInfo/DWARF/DWARFOptimizer.h -> llvm/CodeGen/NonRelocatableStringpool.h
This reverts commit abc7f6800d.
For auto-padding assembler support, we'll need to bundle the label with the instructions (nops or call sequences) so that they don't get separated. This just rearranges the code to make the upcoming change more obvious.
This is in advance of assembler padding directives support where we'll need to bundle the label w/the corresponding faulting instruction to avoid padding being inserted between.
Summary:
This patch associates ordinal numbers to the DDG Nodes allowing
the builder to order nodes within a pi-block in program order. The
algorithm works by simply assuming the order in which the BBList
is fed into the builder. The builder already relies on the blocks being
in program order so that it can compute the dependencies correctly.
Similarly the order of instructions in their parent basic blocks
determine their program order.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto, ppc-slack
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70986
That patch is extracted from the D70709. It moves CompileUnit, DeclContext
into llvm/DebugInfo/DWARF. It also adds new file DWARFOptimizer with
AddressesMap class. AddressesMap generalizes functionality
from RelocationManager.
Differential Revision: https://reviews.llvm.org/D71271
Summary:
The vector pattern `(a + b + 1) / 2` was previously selected to an
avgr_u instruction regardless of nuw flags, but this is incorrect in
the case where either addition may have an unsigned wrap. This CL
changes the existing pattern to require both adds to have nuw flags
and adds builtin functions and intrinsics for the avgr_u instructions
because the corrected pattern is not representable in C.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71648
LLJITBuilder will now use JITLink on supported platforms even if a custom
JITTargetMachineBuilder is supplied, provided that neither the code model,
nor the relocation model, nor the ObjectLinkingLayerCreator is set.
Add new intrinsics
llvm.experimental.constrained.minimum
llvm.experimental.constrained.maximum
as strict versions of llvm.minimum and llvm.maximum.
Includes SystemZ back-end support.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71624
Summary:
This patch adds instructions to the InstCombine worklist after they are properly inserted. This way we don't get `<badref>`s printed when logging added instructions.
It also adds a check in `Worklist::Add` that ensures that all added instructions have parents.
Simple test case that illustrates the difference when run with `--debug-only=instcombine`:
```
define i32 @test35(i32 %a, i32 %b) {
%1 = or i32 %a, 1135
%2 = or i32 %1, %b
ret i32 %2
}
```
Before this patch:
```
INSTCOMBINE ITERATION #1 on test35
IC: ADDING: 3 instrs to worklist
IC: Visiting: %1 = or i32 %a, 1135
IC: Visiting: %2 = or i32 %1, %b
IC: ADD: %2 = or i32 %a, %b
IC: Old = %3 = or i32 %1, %b
New = <badref> = or i32 %2, 1135
IC: ADD: <badref> = or i32 %2, 1135
...
```
With this patch:
```
INSTCOMBINE ITERATION #1 on test35
IC: ADDING: 3 instrs to worklist
IC: Visiting: %1 = or i32 %a, 1135
IC: Visiting: %2 = or i32 %1, %b
IC: ADD: %2 = or i32 %a, %b
IC: Old = %3 = or i32 %1, %b
New = <badref> = or i32 %2, 1135
IC: ADD: %3 = or i32 %2, 1135
...
```
Reviewers: fhahn, davide, spatel, foad, grosser, nikic
Reviewed By: nikic
Subscribers: nikic, lebedev.ri, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71093
Since VFS paths can be in either Posix or Windows style, we have to use
a more flexible definition of "absolute" path.
The key here is that FileSystem::makeAbsolute is now virtual, and the
RedirectingFileSystem override checks for either concept of absolute
before trying to make the path absolute by combining it with the current
directory.
Differential Revision: https://reviews.llvm.org/D70701
This reverts commit 830e08b98b and eb1857ce0d.
This commit leads to an unexpected failure on test/CodeGen/AArch64/sve-gather-scatter-dag-combine.ll.
The review will need more changes before its re-commited.
Summary:
This patch teaches InstCombine to accept a new parameter: maximum number of iterations over functions.
InstCombine tries to simplify instructions by iterating over the whole function until the function stops changing. As a consequence, the last iteration before reaching a fixpoint visits all instructions in the worklist and never performs any rewrites.
Bounding the number of iterations can have 2 benefits:
* In case the users of the pass can make a good guess about the number of required iterations, we can save the time normally spent on the last iteration that doesn't change anything.
* When the wants to use InstCombine as a cleanup pass, it may be enough to run just a few iterations and stop even before reaching a fixpoint. This can be also useful for implementing a lightweight pass pipeline (think `-O1`).
This patch does not change the behavior of opt or Clang -- limiting the number of iterations is entirely opt-in.
Reviewers: fhahn, davide, spatel, foad, nlopes, grosser, lebedev.ri, nikic, xbolva00
Reviewed By: spatel
Subscribers: craig.topper, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71145
Summary: Replace the integer immediate intrisics with splat vector variants so they can be applied as optimizations for the C/C++ intrinsics.
Reviewers: sdesmalen, huntergr, rengolin, efriedma, c-rhodes, mgudim, kmclaughlin
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits, amehsan
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71614
(This commit restores the original branch (4272372c57) and applies an
additional change dropped from the original in a bad merge. This change
should address the previous bot failures. Both changes reviewed by pete.)
Summary:
This commit builds upon Derek Schuff's 2014 commit for attaching labels to
existing fragments ( Diff Revision: http://reviews.llvm.org/D5915 )
When temporary labels appear ahead of a fragment, MCObjectStreamer will
track the temporary label symbol in a "Pending Labels" list. Labels are
associated with fragments when a real fragment arrives; otherwise, an empty
data fragment will be created if the streamer's section changes or if the
stream finishes.
This commit moves the "Pending Labels" list into each MCStream, so that
this label-fragment matching process is resilient to section changes. If
the streamer emits a label in a new section, switches to another section to
do other work, then switches back to the first section and emits a
fragment, that initial label will be associated with this new fragment.
Labels will only receive empty data fragments in the case where no other
fragment exists for that section.
The downstream effects of this can be seen in Mach-O relocations. The
previous approach could produce local section relocations and external
symbol relocations for the same data in an object file, and this mix of
relocation types resulted in problems in the ld64 Mach-O linker. This
commit ensures relocations triggered by temporary labels are consistent.
Reviewers: pete, ab, dschuff
Reviewed By: pete, dschuff
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71368
This reverts commit 1f3dd83cc1, reapplying
commit bb1b0bc4e5.
The original commit failed on some builds seemingly due to the use of a
bracketed constructor with an std::array, i.e. `std::array<> arr({...})`.
Summary:
This is used by the extending_loads combine to tell the apply step which
use is the preferred one to fold and the other uses should be re-written
to consume.
Depends on D69117
Reviewers: volkan, bogner
Reviewed By: volkan
Subscribers: hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69147
This reverts commit e62e760f29.
The issue @uweigand raised should have been fixed by iterating over the
vector that owns the operand list data instead of the FoldingSet.
The MSVC issue raised by @thakis should have been fixed by relaxing the
regexes a little. I don't have a Windows machine available to test that so
I tested it by using `perl -p -e 's/0x([0-9a-f]+)/\U\1\E/g' to convert the
output of %p to the windows style.
I've guessed at the issue @phosek raised as there wasn't enough information
to investigate it. What I think is happening on that bot is the -debug
option isn't available because the second stage build is a release build.
I'm not sure why other release-mode bots didn't report it though.
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop
casts impossible. This patch enables the salvaging of casts by using the
DW_OP_LLVM_convert operator for SExt and Trunc instructions.
There is another issue which is exposed by this fix, in which fragment
DIExpressions (which are preserved more readily by this patch) for
values that must be split across registers in ISel trigger an assertion,
as the 'split' fragments extend beyond the bounds of the fragment
DIExpression causing an error. This patch also fixes this issue by
checking the fragment status of DIExpressions which are to be split, and
dropping fragments that are invalid.
Add an extra parameter so alignment can be taken under
consideration in gather/scatter legalization.
Differential Revision: https://reviews.llvm.org/D71610
and follow-on patches.
This is breaking a few build bots and local builds with follow-up already
on the patch thread.
This reverts commits 390c8baa54 and
520e3d66e7.
Summary:This PR move instructions from FC0.Latch bottom up to the
beginning of FC1.Latch as long as they are proven safe.
To illustrate why this is beneficial, let's consider the following
example:
Before Fusion:
header1:
br header2
header2:
br header2, latch1
latch1:
br header1, preheader3
preheader3:
br header3
header3:
br header4
header4:
br header4, latch3
latch3:
br header3, exit3
After Fusion (before this PR):
header1:
br header2
header2:
br header2, latch1
latch1:
br header3
header3:
br header4
header4:
br header4, latch3
latch3:
br header1, exit3
Note that preheader3 is removed during fusion before this PR.
Notice that we cannot fuse loop2 with loop4 as there exists block latch1
in between.
This PR move instructions from latch1 to beginning of latch3, and remove
block latch1. LoopFusion is now able to fuse loop nest recursively.
After Fusion (after this PR):
header1:
br header2
header2:
br header3
header3:
br header4
header4:
br header2, latch3
latch3:
br header1, exit3
Reviewer: kbarton, jdoerfert, Meinersbur, dmgreen, fhahn, hfinkel,
bmahjour, etiotto
Reviewed By: kbarton, Meinersbur
Subscribers: hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D71165
The following intrinsics currently carry a rounding mode metadata argument:
llvm.experimental.constrained.minnum
llvm.experimental.constrained.maxnum
llvm.experimental.constrained.ceil
llvm.experimental.constrained.floor
llvm.experimental.constrained.round
llvm.experimental.constrained.trunc
This is not useful since the semantics of those intrinsics do not in any way
depend on the rounding mode. In similar cases, other constrained intrinsics
do not have the rounding mode argument. Remove it here as well.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71218
In Xcode 11, ld added a new flag called -platform_version that can be used instead of the old -<platform>_version_min flags.
The new flag allows Clang to pass the SDK version from the driver to the linker.
This patch adopts the new -platform_version flag in Clang, and starts using it by default,
unless a linker version < 520 is passed to the driver.
Differential Revision: https://reviews.llvm.org/D71579
As of b1d8576 there is middle-end support for STRICT_[SU]INT_TO_FP,
so this patch adds SystemZ back-end support as well.
The patch is SystemZ target specific except for adding SD patterns
strict_[su]int_to_fp and any_[su]int_to_fp to TargetSelectionDAG.td
as usual.
Summary:
When we build the walk across these DAG's we need to be able to reach every node
from the roots. Flip and traversal edges (so that use->def becomes def->uses)
that make nodes unreachable. Note that early on we'll just error out on these
flipped edges as def->uses edges are more complicated to match due to their
one->many nature.
Depends on D69077
Reviewers: volkan, bogner
Subscribers: llvm-commits
Summary:
This commit builds upon Derek Schuff's 2014 commit for attaching labels to
existing fragments ( Diff Revision: http://reviews.llvm.org/D5915 )
When temporary labels appear ahead of a fragment, MCObjectStreamer will
track the temporary label symbol in a "Pending Labels" list. Labels are
associated with fragments when a real fragment arrives; otherwise, an empty
data fragment will be created if the streamer's section changes or if the
stream finishes.
This commit moves the "Pending Labels" list into each MCStream, so that
this label-fragment matching process is resilient to section changes. If
the streamer emits a label in a new section, switches to another section to
do other work, then switches back to the first section and emits a
fragment, that initial label will be associated with this new fragment.
Labels will only receive empty data fragments in the case where no other
fragment exists for that section.
The downstream effects of this can be seen in Mach-O relocations. The
previous approach could produce local section relocations and external
symbol relocations for the same data in an object file, and this mix of
relocation types resulted in problems in the ld64 Mach-O linker. This
commit ensures relocations triggered by temporary labels are consistent.
Reviewers: pete, ab, dschuff
Reviewed By: pete, dschuff
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71368
of integers to floating point.
This includes some of Craig Topper's changes for promotion support from
D71130.
Differential Revision: https://reviews.llvm.org/D69275
This fixes an assertion failure that triggers inside
getMemOperandWithOffset when Machine Sinking calls it on a MachineInstr
that is not a memory operation.
Different backends implement getMemOperandWithOffset differently: some
return false on non-memory MachineInstrs, others assert.
The Machine Sinking pass in at least SinkingPreventsImplicitNullCheck
relies on getMemOperandWithOffset to return false on non-memory
MachineInstrs, instead of asserting.
This patch updates the documentation on getMemOperandWithOffset that it
should return false on any MachineInstr it cannot handle, instead of
asserting. It also adapts the in-tree backends accordingly where
necessary.
Differential Revision: https://reviews.llvm.org/D71359
Summary:
This is a resubmit of D71473.
This patch introduces a set of functions to enable deprecation of IRBuilder functions without breaking out of tree clients.
Functions will be deprecated one by one and as in tree code is cleaned up.
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: aaron.ballman, courbet
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71547
Following on from 8ddcd1dc26, which added the support. As pointed out
on D71059 this does not build on some systems with LLVM_ENABLE_THREADS=OFF.
Differential Revision: https://reviews.llvm.org/D71548
Summary:
With DWARF5 it is no longer possible to distinguish normal methods and methods with `__attribute__((objc_direct))` by just looking at the debug information
as they are both now children of the of the DW_TAG_structure_type that defines them (before only the `__attribute__((objc_direct))` methods were children).
This means that in LLDB we are no longer able to create a correct Clang AST of a module by just looking at the debug information. Instead we would
need to call the Objective-C runtime to see which of the methods have a `__attribute__((objc_direct))` and then add the attribute to our own Clang AST
depending on what the runtime returns. This would mean that we either let the module AST be dependent on the Objective-C runtime (which doesn't
seem right) or we retroactively add the missing attribute to the imported AST in our expressions.
A third option is to annotate methods with `__attribute__((objc_direct))` as `DW_AT_APPLE_objc_direct` which is what this patch implements. This way
LLDB doesn't have to call the runtime for any `__attribute__((objc_direct))` method and the AST in our module will already be correct when we create it.
Reviewers: aprantl, SouraVX
Reviewed By: aprantl
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D71201
Summary:
The instructions were originally implemented via builtins and
intrinsics so users would have to explicitly opt-in to using
them. This was useful while were validating whether these instructions
should have been merged into the spec proposal. Now that they have
been, we can use normal codegen patterns, so the intrinsics and
builtins are no longer useful.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71500
Summary:
Follow-on to D66428 and D71193, to build the TLI per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
With D71193, the -fno-builtin* flags are converted to function
attributes, so we can now set this information per-function on the TLI.
In this patch, the TLI constructor is changed to take a Function, which
can be used to override the available builtins. The TLI is augmented
with an array that can be used to specify which builtins are not
available for the corresponding function. The available function checks
are changed to consult this override before checking the underlying
module level baseline TLII. New code is added to set this override
array based on the attributes.
I also removed the code that sets availability in the TLII in clang from
the options, which is no longer needed.
I removed a per-Triple caching of TLII objects in the analysis object,
as it is based on the Module's Triple which is the same for all
functions in any case. Is there a case where we would be compiling
multiple Modules with different Triples in one compilation?
Finally, I have changed the legacy analysis wrapper to create and use
the new PM analysis class (TargetLibraryAnalysis) in getTLI. This is
consistent with the behavior of getTTI for the legacy
TargetTransformInfo analysis. This change means that getTLI now creates
a new TLI on each call (although that should be very cheap as we cache
the module level TLII, and computing the per-function
attribute based availability should also be reasonably efficient).
I measured the compile time for a large C++ file with tens of thousands
of functions and as expected there was no increase.
Reviewers: chandlerc, hfinkel, gchatelet
Subscribers: mehdi_amini, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67923
Summary:
This patch introduces a set of functions to enable deprecation of IRBuilder functions without breaking out of tree clients.
Functions will be deprecated one by one and as in tree code is cleaned up.
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71473
Summary:
Add a RemoveRedundantDbgInstrs to BasicBlockUtils with the
goal to remove redundant dbg intrinsics from a basic block.
This can be useful after various transforms, as it might
be simpler to do a filtering of dbg intrinsics after the
transform than during the transform.
One primary use case would be to replace a too aggressive
removal done by MergeBlockIntoPredecessor, seen at loop
rotate (not done in this patch).
The elimination algorithm currently focuses on dbg.value
intrinsics and is doing two iterations over the BB.
First we iterate backward starting at the last instruction
in the BB. Whenever a consecutive sequence of dbg.value
instructions are found we keep the last dbg.value for
each variable found (variable fragments are identified
using the {DILocalVariable, FragmentInfo, inlinedAt}
triple as given by the DebugVariable helper class).
Next we iterate forward starting at the first instruction
in the BB. Whenever we find a dbg.value describing a
DebugVariable (identified by {DILocalVariable, inlinedAt})
we save the {DIValue, DIExpression} that describes that
variables value. But if the variable already was mapped
to the same {DIValue, DIExpression} pair we instead drop
the second dbg.value.
To ease the process of making lit tests for this utility a
new pass is introduced called RedundantDbgInstElimination.
It can be executed by opt using -redundant-dbg-inst-elim.
Reviewers: aprantl, jmorse, vsk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71478
Summary:
At present, the code calculating known bits of AMDGPU MUL_I24 confuses the concepts of "non-negative number" and "positive number".
In some situations, it results in incorrect code. I have a case where the optimizer replaces the result of calculating MUL_I24(-5, 0) with -8.
Reviewers: foad, arsenm
Reviewed By: arsenm
Subscribers: foad, arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Patch by Eugene Kuznetsov.
Differential Revision: https://reviews.llvm.org/D70367
This relieves ObjectLinkingLayer clients of the responsibility of holding the
memory manager. This makes it easier to select between RTDyldObjectLinkingLayer
(which already owned its memory manager factory) and ObjectLinkingLayer at
runtime as clients aren't required to hold a jitlink::MemoryManager field just
in case ObjectLinkingLayer is selected.
Legalization algorithm is complicated by two facts:
1) While regular instructions should be possible to legalize in
an isolated, per-instruction, context-free manner, legalization
artifacts can only be eliminated in pairs, which could be deeply, and
ultimately arbitrary nested: { [ () ] }, where which paranthesis kind
depicts an artifact kind, like extend, unmerge, etc. Such structure
can only be fully eliminated by simple local combines if they are
attempted in a particular order (inside out), or alternatively by
repeated scans each eliminating only one innermost pair, resulting in
O(n^2) complexity.
2) Some artifacts might in fact be regular instructions that could (and
sometimes should) be legalized by the target-specific rules. Which
means failure to eliminate all artifacts on the first iteration is
not a failure, they need to be tried as instructions, which may
produce more artifacts, including the ones that are in fact regular
instructions, resulting in a non-constant number of iterations
required to finish the process.
I trust the recently introduced termination condition (no new artifacts
were created during as-a-regular-instruction-retrial of artifacts not
eliminated on the previous iteration) to be efficient in providing
termination, but only performing the legalization in full if and only if
at each step such chains of artifacts are successfully eliminated in
full as well.
Which is currently not guaranteed, as the artifact combines are applied
only once and in an arbitrary order that has to do with the order of
creation or insertion of artifacts into their worklist, which is a no
particular order.
In this patch I make a small change to the artifact combiner, making it
to re-insert into the worklist immediate (modulo a look-through copies)
artifact users of each vreg that changes its definition due to an
artifact combine.
Here the first scan through the artifacts worklist, while not
being done in any guaranteed order, only needs to find the innermost
pair(s) of artifacts that could be immediately combined out. After that
the process follows def-use chains, making them shorter at each step, thus
combining everything that can be combined in O(n) time.
Reviewers: volkan, aditya_nandakumar, qcolombet, paquette, aemerson, dsanders
Reviewed By: aditya_nandakumar, paquette
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71448
and introducing new unittests/CodeGen/GlobalISel/LegalizerTest.cpp
relying on it to unit test the entire legalizer algorithm (including the
top-level main loop).
See also https://reviews.llvm.org/D71448
Summary:
This change is preparatory work to use this helper functions in more places.
In order to make this change, getMemBasePlusOffset() has been extended to
also take a SDNodeFlags parameter.
The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.
We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.
Reviewers: spatel
Reviewed By: spatel
Subscribers: merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71206
Summary:
This change is preparatory work to use this helper functions in more places.
Currently the function only allows integer constants offsets, but there
are cases where we can use an existing SDValue parameter.
The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.
We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.
Reviewers: spatel, craig.topper
Reviewed By: spatel, craig.topper
Subscribers: craig.topper, merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71205
Summary:
This change is preparatory work to use this helper functions in more places.
Currently the function only allows positive offsets, but there are cases
where we want to subtract an offset from an existing pointer.
The motivation for this change is our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project). We use a separate register
type to store pointers (128-bit capabilities, which are effectively
unforgeable and monotonic fat pointers). These capabilities permit a
reduced set of operations and therefore use a separate ValueType (iFATPTR).
to represent pointers implemented as capabilities.
Therefore, we need to avoid using ISD::ADD for our patterns that operate
on pointers and need to use a function that chooses ISD::ADD or a new
ISD::PTRADD opcode depending on the value type.
We originally added a new DAG.getPointerAdd() function, but after this
patch series we can modify the implementation of getMemBasePlusOffset()
instead. Avoiding direct uses of ISD::ADD for pointer types will
significantly reduce the amount of assertion/instruction selection
failures for us in future upstream merges.
Reviewers: spatel
Reviewed By: spatel
Subscribers: merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71204
This reverts commit 0be81968a2.
The VFDatabase needs some rework to be able to handle vectorization
and subsequent scalarization of intrinsics in out-of-tree versions of
the compiler. For more details, see the discussion in
https://reviews.llvm.org/D67572.
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
Summary:
This patch adds intrinsics for the following MVE instructions:
* VABAV
* VMLADAV, VMLSDAV
* VMLALDAV, VMLSLDAV
* VRMLALDAVH, VRMLSLDAVH
Each of the above 4 groups has a corresponding new LLVM IR intrinsic,
since the instructions cannot be easily represented using
general-purpose IR operations.
Reviewers: simon_tatham, ostannard, dmgreen, MarkMurrayARM
Reviewed By: MarkMurrayARM
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71062
Summary:
This fills in the remaining shift operations that take a single vector
input and an immediate shift count: the `vqshl`, `vqshlu`, `vrshr` and
`vshll[bt]` families.
`vshll[bt]` (which shifts each input lane left into a double-width
output lane) is the most interesting one. There are separate MC
instruction ids for shifting by exactly the input lane width and
shifting by less than that, because the instruction encoding is so
completely different for the lane-width special case. So I had to
write two sets of patterns to match based on the immediate shift
count, which involved adding a ComplexPattern matcher to avoid the
general-case pattern accidentally matching the special case too. For
that family I've made sure to add an llc codegen test for both
versions of each instruction.
I'm experimenting with a new strategy for parametrising the isel
patterns for all these instructions: adding extra fields to the
relevant `Instruction` subclass itself, which are ignored by the
Tablegen backends that generate the MC data, but can be retrieved from
each instance of that instruction subclass when it's passed as a
template parameter to the multiclass that generates its isel patterns.
A nice effect of that is that I can fill in those informational fields
using `let` blocks, rather than having to type them out once per
instruction at `defm` time.
(As a result, quite a lot of existing instruction `def`s are
reindented by this patch, so it's clearer to read with whitespace
changes ignored.)
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71458
Summary:
The use of a boolean isInteger flag (generally initialized using
VT.isInteger()) caused errors in our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project).
In our backend, pointers use a separate ValueType (iFATPTR) and therefore
.isInteger() returns false. This meant that getSetCCInverse() was using the
floating-point variant and generated incorrect code for us:
`(void *)0x12033091e < (void *)0xffffffffffffffff` would return false.
Committing this change will significantly reduce our merge conflicts
for each upstream merge.
Reviewers: spatel, bogner
Reviewed By: bogner
Subscribers: wuzish, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70917
Summary:
Better use of multiclass is used, and this helped find some existing
bugs in the predicated VMULL* intrinsics, which are now fixed.
The refactored VMULL[TB]Q_(INT|POLY)_M() intrinsics were discovered
to have an argument ("inactive") with incorrect type, and this required
a fix that is included in this whole patch. The argument "inactive"
should have been the same width (per vector element) as the return
type of the intrinsic, but was not in the case where the return type
was double the element width of the input types.
To assist in testing the multiclassing , and to thwart further gremlins,
the unit tests are improved in scope.
The *.ll tests are all generated by a small bit of throw-away scripting
from the corresponding *.c tests, and as such the diffs are large and
nasty. Look at the file rather than the diff.
Reviewers: dmgreen, miyuki, ostannard, simon_tatham
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71421
Updated pred_load patterns added to AArch64SVEInstrInfo.td by this patch
to use reg + imm non-temporal loads to fix previous test failures.
Original commit message:
Adds the following intrinsics:
- llvm.aarch64.sve.ldnt1
- llvm.aarch64.sve.stnt1
This patch creates masked loads and stores with the
MONonTemporal flag set when used with the intrinsics above.
Currently we have the `Flags` property that allows to
set flags for a section. The problem is that it does not
allow us to set an arbitrary value, because of bit fields
validation under the hood. An arbitrary values can be used
to test specific broken cases.
We probably do not want to relax the validation, so this
patch adds a `ShSize` property that allows to
override the `sh_size`. It is inline with others `Sh*` properties
we have already.
Differential revision: https://reviews.llvm.org/D71411
Summary:
Add pattern matching for the following instructions:
- add, sub, subr, sqadd, sqsub, uqadd, uqsub
This patch required complex patterns to match the immediate with optinal left shift.
I re-used the Select function from the other SVE repo to implement the complext pattern.
I plan on doing another patch to also match constant vector of the same immediate.
Reviewers: sdesmalen, huntergr, rengolin, efriedma, c-rhodes, mgudim, kmclaughlin
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits, amehsan
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71370
When we reason about the pointer argument that is byval we actually
reason about a local copy of the value passed at the call site. This was
not the case before and we wrongly introduced attributes based on the
surrounding function.
AAMemoryBehaviorArgument, AAMemoryBehaviorCallSiteArgument and
AANoCaptureCallSiteArgument are made aware of byval now. The code
to skip "subsuming positions" for reasoning follows a common pattern and
we should refactor it. A TODO was added.
Discovered by @efriedma as part of D69748.
Summary:
This adds support for embedding bitcode in a binary during LTO. The libLTO gains supports the `-lto-embed-bitcode` flag. The option allows users of the LTO library to embed a bitcode section. For example, LLD can pass the option via `ld.lld -mllvm=-lto-embed-bitcode`.
This feature allows doing something comparable to `clang -c -fembed-bitcode`, but on the (LTO) linker level. Having bitcode alongside native code has many use-cases. To give an example, the MacOS linker can create a `-bitcode_bundle` section containing bitcode. Also, having this feature built into LLVM is an alternative to 3rd party tools such as [[ https://github.com/travitch/whole-program-llvm | wllvm ]] or [[ https://github.com/SRI-CSL/gllvm | gllvm ]]. As with these tools, this feature simplifies creating "whole-program" llvm bitcode files, but in contrast to wllvm/gllvm it does not rely on a specific llvm frontend/driver.
Patch by Josef Eisl <josef.eisl@oracle.com>
Reviewers: #llvm, #clang, rsmith, pcc, alexshap, tejohnson
Reviewed By: tejohnson
Subscribers: tejohnson, mehdi_amini, inglorion, hiraditya, aheejin, steven_wu, dexonsmith, dang, cfe-commits, llvm-commits, #llvm, #clang
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68213
This patch renames the LoopInfo::isRotated() method to LoopInfo::isRotatedForm()
to make it clear that the method checks whether the loop is in rotated form, not
whether the loop has been rotated by the LoopRotation pass.
This is the first patch adding an initial set of matrix intrinsics and a
corresponding lowering pass. This has been discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2019-October/136240.html
The first patch introduces four new intrinsics (transpose, multiply,
columnwise load and store) and a LowerMatrixIntrinsics pass, that
lowers those intrinsics to vector operations.
Matrixes are embedded in a 'flat' vector (e.g. a 4 x 4 float matrix
embedded in a <16 x float> vector) and the intrinsics take the dimension
information as parameters. Those parameters need to be ConstantInt.
For the memory layout, we initially assume column-major, but in the RFC
we also described how to extend the intrinsics to support row-major as
well.
For the initial lowering, we split the input of the intrinsics into a
set of column vectors, transform those column vectors and concatenate
the result columns to a flat result vector.
This allows us to lower the intrinsics without any shape propagation, as
mentioned in the RFC. In follow-up patches, we plan to submit the
following improvements:
* Shape propagation to eliminate the embedding/splitting for each
intrinsic.
* Fused & tiled lowering of multiply and other operations.
* Optimization remarks highlighting matrix expressions and costs.
* Generate loops for operations on large matrixes.
* More general block processing for operation on large vectors,
exploiting shape information.
We would like to add dedicated transpose, columnwise load and store
intrinsics, even though they are not strictly necessary. For example, we
could instead emit a large shufflevector instruction instead of the
transpose. But we expect that to
(1) become unwieldy for larger matrixes (even for 16x16 matrixes,
the resulting shufflevector masks would be huge),
(2) risk instcombine making small changes, causing us to fail to
detect the transpose, preventing better lowerings
For the load/store, we are additionally planning on exploiting the
intrinsics for better alias analysis.
Reviewers: anemet, Gerolf, reames, hfinkel, andrew.w.kaylor, efriedma, rengolin
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D70456
This makes TimeTraceProfilerInstance thread local. Added
timeTraceProfilerFinishThread() which moves the thread local instance to
a global vector of instances. timeTraceProfilerWrite() then writes
recorded data from all instances.
Threads are identified based on their thread ids. Totals are reported
with artificial thread ids higher than the real ones.
Replaced raw pointer for TimeTraceProfilerInstance with unique_ptr.
Differential Revision: https://reviews.llvm.org/D71059
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
Soon Intrinsic::ID will be a plain integer, so this overload will not be
possible.
Rename both overloads to ensure that downstream targets observe this as
a build failure instead of a runtime failure.
Split off from D71320
Reviewers: efriedma
Differential Revision: https://reviews.llvm.org/D71381
Fixes issue encountered in D56362, where I tried to use a
SmallSetVector<Instruction*, 128> with an excessively large number
of inline elements. This triggers an "Must allocate more buckets
than are inline" assertion inside allocateBuckets() under certain
usage patterns.
The issue is as follows: The grow() method is used either to grow
the map, or to rehash it and remove tombstones. The latter is done
if the fraction of empty (non-used, non-tombstone) elements is
below 1/8. In this case grow() is invoked with the current number
of buckets.
This is currently incorrectly handled for dense maps using the small
rep. The current implementation will switch them over to the large
rep, which violates the invariant that the large rep is only used
if there are more than InlineBuckets buckets.
This patch fixes the issue by staying in the small rep and only
moving the buckets. An alternative, if we do want to switch to the
large rep in this case, would be to relax the assertion in
allocateBuckets().
Differential Revision: https://reviews.llvm.org/D56455
This is the initial patch for the OpenMP-IR-Builder, as discussed on the
mailing list ([1] and later) and at the US Dev Meeting'19.
The design is similar to D61953 but:
- in a non-WIP status, with proper documentation and working.
- using a OpenMPKinds.def file to manage lists of directives, runtime
functions, types, ..., similar to the current Clang implementation.
- restricted to handle only (simple) barriers, to implement most
`#pragma omp barrier` directives and most implicit barriers.
- properly hooked into Clang to be used if possible (D69922).
- compatible with the remaining code generation.
Parts have been extracted into D69853.
The plan is to have multiple people working on moving logic from Clang
here once the initial scaffolding (=this patch) landed.
[1] http://lists.flang-compiler.org/pipermail/flang-dev_lists.flang-compiler.org/2019-May/000197.html
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: mgorny, hiraditya, bollu, guansong, jfb, cfe-commits, llvm-commits, penzn, ppenzin
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69785
This is equivalent to the existing `import_name` and `import_module`
attributes which control the import names in the final wasm binary
produced by lld.
This maps the existing
This attribute currently requires a string rather than using the
symbol name for a couple of reasons:
1. Avoid confusion with static and dynamic linking which is
based on symbol name. Exporting a function from a wasm module using
this directive is orthogonal to both static and dynamic linking.
2. Avoids name mangling.
Differential Revision: https://reviews.llvm.org/D70520
This is an alternate fix for the bug discussed in D70595.
This also includes minimal tests for other in-tree targets
to show the problem more generally.
We check the number of uses as a predicate for whether some
value is free to negate, but that use count can change as we
rewrite the expression in getNegatedExpression(). So something
that was marked free to negate during the cost evaluation
phase becomes not free to negate during the rewrite phase (or
the inverse - something that was not free becomes free).
This can lead to a crash/assert because we expect that
everything in an expression that is negatible to be handled
in the corresponding code within getNegatedExpression().
This patch skips the use check during the rewrite phase.
So we determine that some expression isNegatibleForFree
(identically to without this patch), but during the rewrite,
don't rely on use counts to decide how to create the optimal
expression.
Differential Revision: https://reviews.llvm.org/D70975
Summary:
This patch adds a method to determine if a loop is in rotated form (the latch is
an exiting block). It also modifies the getLoopGuardBranch method to use this
new method. This method can also be used in Loopfusion. Once this patch lands I
will make the corresponding changes there.
Reviewers: jdoerfert, Meinersbur, dmgreen, etiotto, Whitney, fhahn, hfinkel
Reviewed By: Meinersbur
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65958
This simplifies code where no extra details are required
Also don't write out detail when it is empty.
Differential Revision: https://reviews.llvm.org/D71347
Summary:
These allow you to get and set the operator of a dag node, without
affecting its list of arguments.
`!getop` is slightly fiddly because in many contexts you need its
return value to have a static type more specific than 'any record'. It
works to say `!cast<BaseClass>(!getop(...))`, but it's cumbersome, so
I made `!getop` take an optional type suffix itself, so that can be
written as the shorter `!getop<BaseClass>(...)`.
Reviewers: hfinkel, nhaehnle
Reviewed By: nhaehnle
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71191
Summary:
Adds the following intrinsics:
- llvm.aarch64.sve.ldnt1
- llvm.aarch64.sve.stnt1
This patch creates masked loads and stores with the
MONonTemporal flag set when used with the intrinsics above.
Reviewers: sdesmalen, paulwalker-arm, dancgr, mgudim, efriedma, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71000
After creating a low-overhead loop, the loop update instruction was still
lingering around hurting performance. This removes dead loop update
instructions, which in our case are mostly SUBS instructions.
To support this, some helper functions were added to MachineLoopUtils and
ReachingDefAnalysis to analyse live-ins of loop exit blocks and find uses
before a particular loop instruction, respectively.
This is a first version that removes a SUBS instruction when there are no other
uses inside and outside the loop block, but there are some more interesting
cases in test/CodeGen/Thumb2/LowOverheadLoops/mve-tail-data-types.ll which
shows that there is room for improvement. For example, we can't handle this
case yet:
..
dlstp.32 lr, r2
.LBB0_1:
mov r3, r2
subs r2, #4
vldrh.u32 q2, [r1], #8
vmov q1, q0
vmla.u32 q0, q2, r0
letp lr, .LBB0_1
@ %bb.2:
vctp.32 r3
..
which is a lot more tricky because r2 is not only used by the subs, but also by
the mov to r3, which is used outside the low-overhead loop by the vctp
instruction, and that requires a bit of a different approach, and I will follow
up on this.
Differential Revision: https://reviews.llvm.org/D71007
This adds the family of `vshlq_n` and `vshrq_n` ACLE intrinsics, which
shift every lane of a vector left or right by a compile-time
immediate. They mostly work by expanding to the IR `shl`, `lshr` and
`ashr` operations, with their second operand being a vector splat of
the immediate.
There's a fiddly special case, though. ACLE specifies that the
immediate in `vshrq_n` can take values up to //and including// the bit
size of the vector lane. But LLVM IR thinks that shifting right by the
full size of the lane is UB, and feels free to replace the `lshr` with
an `undef` half way through the optimization pipeline. Hence, to keep
this legal in source code, I have to detect it at codegen time.
Logical (unsigned) right shifts by the element size are handled by
simply emitting the zero vector; arithmetic ones are converted into a
shift of one bit less, which will always give the same output.
In order to do that check, I also had to enhance the tablegen
MveEmitter so that it can cope with converting a builtin function's
operand into a bare integer to pass to a code-generating subfunction.
Previously the only bare integers it knew how to handle were flags
generated from within `arm_mve.td`.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: dmgreen, MarkMurrayARM
Subscribers: echristo, hokein, rdhindsa, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71065
This iterator range just includes physical registers and register masks,
which are interesting when dealing with register liveness.
Reviewers: evandro, t.p.northover, paquette, MatzeB, arsenm
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D70562
Summary: This is a follow up of D69281, it enables the X86 backend support for the FP comparision.
Reviewers: uweigand, kpn, craig.topper, RKSimon, cameron.mcinally, andrew.w.kaylor
Subscribers: hiraditya, llvm-commits, annita.zhang, LuoYuanke, LiuChen3
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70582
Change the IRBuilder and clang so that constrained FP intrinsics will be
emitted for builtins when appropriate. Only non-target-specific builtins
are affected in this patch.
Differential Revision: https://reviews.llvm.org/D70256
This patch introduced the VFDatabase, the framework proposed in
http://lists.llvm.org/pipermail/llvm-dev/2019-June/133484.html. [*]
In this patch the VFDatabase is used to bridge the TargetLibraryInfo
(TLI) calls that were previously used to query for the availability of
vector counterparts of scalar functions.
The VFISAKind field `ISA` of VFShape have been moved into into VFInfo,
under the assumption that different vector ISAs may provide the same
vector signature. At the moment, the vectorizer accepts any of the
available ISAs as long as the signature provided by the VFDatabase
matches the one expected in the vectorization process. For example,
when targeting AVX or AVX2, which both have 256-bit registers, the IR
signature of the two vector functions associated to the two ISAs is
the same. The `getVectorizedFunction` method at the moment returns the
first available match. We will need to add more heuristics to the
search system to decide which of the available version (TLI, AVX,
AVX2, ...) the system should prefer, when multiple versions with the
same VFShape are present.
Some of the code in this patch is based on the work done by Sumedh
Arani in https://reviews.llvm.org/D66025.
[*] Notice that in the proposal the VFDatabase was called SVFS. The
name VFDatabase is more in line with LLVM recommendations for
naming classes and variables.
Differential Revision: https://reviews.llvm.org/D67572
Summary:
This patch refactors instruction selection of the complex vector
addition, multiplication and multiply-add intrinsics, so that it is
now based on TableGen patterns rather than C++ code.
It also changes the first parameter (halving vs non-halving) of the
arm_mve_vcaddq IR intrinsic to match the corresponding instruction
encoding, hence it requires some changes in the tests.
The patch addresses David's comment in https://reviews.llvm.org/D71190
Reviewers: dmgreen, ostannard, simon_tatham, MarkMurrayARM
Reviewed By: dmgreen
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71245
Extern variable usage in BPF is different from traditional
pure user space application. Recent discussion in linux bpf
mailing list has two use cases where debug info types are
required to use extern variables:
- extern types are required to have a suitable interface
in libbpf (bpf loader) to provide kernel config parameters
to bpf programs.
https://lore.kernel.org/bpf/CAEf4BzYCNo5GeVGMhp3fhysQ=_axAf=23PtwaZs-yAyafmXC9g@mail.gmail.com/T/#t
- extern types are required so kernel bpf verifier can
verify program which uses external functions more precisely.
This will make later link with actual external function no
need to reverify.
https://lore.kernel.org/bpf/87eez4odqp.fsf@toke.dk/T/#m8d5c3e87ffe7f2764e02d722cb0d8cbc136880ed
This patch added clang support to emit debuginfo for extern variables
with a TargetInfo hook to enable it. The debuginfo for the
extern variable is emitted only if that extern variable is
referenced in the current compilation unit.
Currently, only BPF target enables to generate debug info for
extern variables. The emission of such debuginfo is disabled for C++
at this moment since BPF only supports a subset of C language.
Emission with C++ can be enabled later if an appropriate use case
is identified.
-fstandalone-debug permits us to see more debuginfo with the cost
of bloated binary size. This patch did not add emission of extern
variable debug info with -fstandalone-debug. This can be
re-evaluated if there is a real need.
Differential Revision: https://reviews.llvm.org/D70696
basic blocks
Originally applied in 72ce759928.
Fixed a build failure caused by incorrect use of cast instead of
dyn_cast.
This reverts commit 8b0780f795.
Summary:
This patch fixes a few issues when large arrays are allocated on the
stack. Currently, clang has inconsistent behaviour, for debug builds
there is an assertion failure when the array size on stack is around 2GB
but there is no assertion when the stack is around 8GB. For release
builds there is no assertion, the compilation succeeds but generates
incorrect code. The incorrect code generated is due to using
int/unsigned int instead of their 64-bit counterparts. This patch,
1) Removes the assertion in frame legality check.
2) Converts int/unsigned int in some places to the 64-bit variants. This
helps in generating correct code and removes the inconsistent behaviour.
3) Adds a test which runs without optimisations.
Reviewers: sdesmalen, efriedma, fhahn, aemerson
Reviewed By: efriedma
Subscribers: eli.friedman, fpetrogalli, kristof.beyls, hiraditya,
llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70496
Summary:
The new OpenMPConstants.h is a location for all OpenMP related constants
(and helpers) to live.
This patch moves the directives there (the enum OpenMPDirectiveKind) and
rewires Clang to use the new location.
Initially part of D69785.
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: jholewinski, ppenzin, penzn, llvm-commits, cfe-commits, jfb, guansong, bollu, hiraditya, mgorny
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69853
D34393 added MCCodePadder as an infrastructure for padding code with
NOP instructions. It lacked tests and was not being worked on since
then.
Intel has now worked on an assembler patch to mitigate performance loss
after applying microcode update for the Jump Conditional Code Erratum.
https://www.intel.com/content/www/us/en/support/articles/000055650/processors.html
This new patch shares similarity with MCCodePadder, but has a concrete
use case in mind and is being actively developed. The infrastructure it
introduces can potentially be used for general performance improvement
via alignment. Delete the unused MCCodePadder so that people can develop
the new feature from a clean state.
Reviewed By: jyknight, skan
Differential Revision: https://reviews.llvm.org/D71106
Implement LWG#1203 (https://cplusplus.github.io/LWG/issue1203) for raw_ostream
like libc++ does for std::basic_ostream<...>.
Add a operator<< overload that takes an rvalue reference of a typed derived from
raw_ostream, streams the value to it and returns the stream of the same type as
the argument.
This allows free operator<< to work with rvalue reference raw_ostreams:
raw_ostream& operator<<(raw_ostream&, const SomeType& Value);
raw_os_ostream(std::cout) << SomeType();
It also allows using the derived type like:
auto Foo = (raw_string_ostream(buffer) << "foo").str();
Author: Christian Sigg <csigg@google.com>
Differential Revision: https://reviews.llvm.org/D70686
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
A second try after reverted D71072.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71149
Summary:
This adds the family of `vshlq_n` and `vshrq_n` ACLE intrinsics, which
shift every lane of a vector left or right by a compile-time
immediate. They mostly work by expanding to the IR `shl`, `lshr` and
`ashr` operations, with their second operand being a vector splat of
the immediate.
There's a fiddly special case, though. ACLE specifies that the
immediate in `vshrq_n` can take values up to //and including// the bit
size of the vector lane. But LLVM IR thinks that shifting right by the
full size of the lane is UB, and feels free to replace the `lshr` with
an `undef` half way through the optimization pipeline. Hence, to keep
this legal in source code, I have to detect it at codegen time.
Logical (unsigned) right shifts by the element size are handled by
simply emitting the zero vector; arithmetic ones are converted into a
shift of one bit less, which will always give the same output.
In order to do that check, I also had to enhance the tablegen
MveEmitter so that it can cope with converting a builtin function's
operand into a bare integer to pass to a code-generating subfunction.
Previously the only bare integers it knew how to handle were flags
generated from within `arm_mve.td`.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71065
CodeGenPrepare::placeDebugValues moves variable location intrinsics to be
immediately after the Value they refer to. This makes tracking of locations
very easy; but it changes the order in which assignments appear to the
debugger, from the source programs order to the order in which the
optimised program computes values. This then leads to PR43986 and PR38754,
where variable locations that were in a conditional block are made
unconditional, which is highly misleading.
This patch adjusts placeDbgValues to only re-order variable location
intrinsics if they use a Value before it is defined, significantly reducing
the damage that it does. This is still not 100% safe, but the rest of
CodeGenPrepare needs polishing to correctly update debug info when
optimisations are performed to fully fix this.
This will probably break downstream debuginfo tests -- if the
instruction-stream position of variable location changes isn't the focus of
the test, an easy fix should be to manually apply placeDbgValues' behaviour
to the failing tests, moving dbg.value intrinsics next to SSA variable
definitions thus:
%foo = inst1
%bar = ...
%baz = ...
void call @llvm.dbg.value(metadata i32 %foo, ...
to
%foo = inst1
void call @llvm.dbg.value(metadata i32 %foo, ...
%bar = ...
%baz = ...
This should return your test to exercising whatever it was testing before.
Differential Revision: https://reviews.llvm.org/D58453
Summary:
This patch adds intrinsics for the following MVE instructions:
* VCADD, VHCADD
* VCMUL
* VCMLA
Each of the above 3 groups has a corresponding new LLVM IR intrinsic.
Reviewers: simon_tatham, MarkMurrayARM, ostannard, dmgreen
Reviewed By: MarkMurrayARM
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71190
It appears that the cl::bits options are not used anywhere in-tree. In
the recent addition to add Callback's to the options, the Callback was
missing from this one. This fixes it by adding the same code from the
other classes.
It also adds a simple test, of sorts, just to make sure these continue
compiling.
This attempts to teach the cost model in Arm that code such as:
%s = shl i32 %a, 3
%a = and i32 %s, %b
Can under Arm or Thumb2 become:
and r0, r1, r2, lsl #3
So the cost of the shift can essentially be free. To do this without
trying to artificially adjust the cost of the "and" instruction, it
needs to get the users of the shl and check if they are a type of
instruction that the shift can be folded into. And so it needs to have
access to the actual instruction in getArithmeticInstrCost, which if
available is added as an extra parameter much like getCastInstrCost.
We otherwise limit it to shifts with a single user, which should
hopefully handle most of the cases. The list of instruction that the
shift can be folded into include ADC, ADD, AND, BIC, CMP, EOR, MVN, ORR,
ORN, RSB, SBC and SUB. This translates to Add, Sub, And, Or, Xor and
ICmp.
Differential Revision: https://reviews.llvm.org/D70966
Summary:
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes situations in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: ormris, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D70431
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes a case in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
This adds support for constrained floating-point comparison intrinsics.
Specifically, we add:
declare <ty2>
@llvm.experimental.constrained.fcmp(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
declare <ty2>
@llvm.experimental.constrained.fcmps(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
The first variant implements an IEEE "quiet" comparison (i.e. we only
get an invalid FP exception if either argument is a SNaN), while the
second variant implements an IEEE "signaling" comparison (i.e. we get
an invalid FP exception if either argument is any NaN).
The condition code is implemented as a metadata string. The same set
of predicates as for the fcmp instruction is supported (except for the
"true" and "false" predicates).
These new intrinsics are mapped by SelectionDAG codegen onto two new
ISD opcodes, ISD::STRICT_FSETCC and ISD::STRICT_FSETCCS, again
representing quiet vs. signaling comparison operations. Otherwise
those nodes look like SETCC nodes, with an additional chain argument
and result as usual for strict FP nodes. The patch includes support
for the common legalization operations for those nodes.
The patch also includes full SystemZ back-end support for the new
ISD nodes, mapping them to all available SystemZ instruction to
fully implement strict semantics (scalar and vector).
Differential Revision: https://reviews.llvm.org/D69281
Summary:
Add a new cl::callback attribute to Option.
This attribute specifies a callback function that is called when
an option is seen, and can be used to set other options, as in
option A implies option B. If the option is a `cl::list`, and
`cl::CommaSeparated` is also specified, the callback will fire
once for each value. This could be used to validate combinations
or selectively set other options.
Reviewers: beanz, thomasfinch, MaskRay, thopre, serge-sans-paille
Reviewed By: beanz
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70620
Before this change, the *InstPrinter.cpp files of each target where some
of the slowest objects to compile in all of LLVM. See this snippet produced by
ClangBuildAnalyzer:
https://reviews.llvm.org/P8171$96
Search for "InstPrinter", and see that it shows up in a few places.
Tablegen was emitting a large switch containing a sequence of operand checks,
each of which created many conditions and many BBs. Register allocation and
jump threading both did not scale well with such a large repetitive sequence of
basic blocks.
So, this change essentially turns those control flow structures into
data. The previous structure looked like:
switch (Opc) {
case TGT::ADD:
// check alias 1
if (MI->getOperandCount() == N && // check num opnds
MI->getOperand(0).isReg() && // check opnd 0
...
MI->getOperand(1).isImm() && // check opnd 1
AsmString = "foo";
break;
}
// check alias 2
if (...)
...
return false;
The new structure looks like:
OpToPatterns: Sorted table of opcodes mapping to pattern indices.
\->
Patterns: List of patterns. Previous table points to subrange of
patterns to match.
\->
Conds: The if conditions above encoded as a kind and 32-bit value.
See MCInstPrinter.cpp for the details of how the new data structures are
interpreted.
Here are some before and after metrics.
Time to compile AArch64InstPrinter.cpp:
0m29.062s vs. 0m2.203s
size of the obj:
3.9M vs. 676K
size of clang.exe:
97M vs. 96M
I have not benchmarked disassembly performance, but typically
disassemblers are bottlenecked on IO and string processing, not alias
matching, so I'm not sure it's interesting enough to be worth doing.
Reviewers: RKSimon, andreadb, xbolva00, craig.topper
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D70650
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71072
Summary:
Adds intrinsics for the following:
* cmphs, cmphi
* cmpge, cmpgt
* cmpeq, cmpne
* cmplt, cmple
* cmplo, cmpls
Includes a minor change to `TLI.getMemValueType` that fixes a crash due to the
scalable flag being dropped.
Reviewers: sdesmalen, efriedma, rengolin, rovka, dancgr, huntergr
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70889
That refactoring moves NonRelocatableStringpool into common CodeGen folder.
So that NonRelocatableStringpool could be used not only inside dsymutil.
Differential Revision: https://reviews.llvm.org/D71068
Quentin Colombet