Changed the "jthreads" key/value in the stop reply packets to be "jstopinfo". This JSON only contains threads with valid stop reasons and allows us not to have to ask about other threads via qThreadStopInfo when we are stepping. The "jstopinfo" only gets sent if there are more than one thread since the stop reply packet contains all the info needed for a single thread.
Added a Process::WillPublicStop() in case process subclasses want to do any extra gathering for public stops. For ProcessGDBRemote, we end up sending a jThreadsInfo packet to gather all expedited registers, expedited memory and MacOSX queue information. We only do this for public stops to minimize the packets we send when we have multiple private stops. Multiple private stops happen when a source level single step, step into or step out run the process multiple times while implementing the stepping, and none of these private stops make it out to the UI via notifications because they are private stops.
llvm-svn: 242593
frame, don't go any further, in RNBRemote::SendStopReplyPacketForThread.
These are the memory pre-fetches in the T05 packet and are
included in every private stop that lldb does. lldb needs, at most,
the caller stack frame so we're sending more data than needed by
including additional stack memory prefetches in this reply packet.
Once we've stopped for a public stop, we're going to do a jThreadsInfo
which will include the stack memory prefetches for all threads,
including the one which had the stop reason.
llvm-svn: 242380
This allows stepping operations that don't ever do a public stop to get all the info they need without having to send a jThreadsInfo packet since those tend to be large.
This patch will be followed by a patch that will detect when we do a public stop, and when that happens we will send a jThreadsInfo packet at that time to get all expedited registers and memory.
llvm-svn: 242352
This fixes an off-by-one bug in CMICmdCmdDataInfoLine::Acknowledge. Given:
LineEntry: \[0x0000000100000f37-0x0000000100000f45\): /path/to/file:123:1
-data-info-line would report the line as 12, omitting the last digit.
Reviewed by: ki.stfu, abidh
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11209
llvm-svn: 242306
vm_kernel_page_size appears to not be defined on OSX Mavericks, so the
build fails. This patch fixes the build by calculating the pagesize if
_VM_PAGE_SIZE_H_ is not defined.
llvm-svn: 242114
Summary:
This is the first part of our effort to make llgs single threaded. Currently, llgs consists of
about three threads and the synchronisation between them is a major source of latency when
debugging linux and android applications.
In order to be able to go single threaded, we must have the ability to listen for events from
multiple sources (primarily, client commands coming over the network and debug events from the
inferior) and perform necessary actions. For this reason I introduce the concept of a MainLoop.
A main loop has the ability to register callback's which will be invoked upon receipt of certain
events. MainLoopPosix has the ability to listen for file descriptors and signals.
For the moment, I have merely made the GDBRemoteCommunicationServerLLGS class use MainLoop
instead of waiting on the network socket directly, but the other threads still remain. In the
followup patches I indend to migrate NativeProcessLinux to this class and remove the remaining
threads.
Reviewers: ovyalov, clayborg, amccarth, zturner, emaste
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11066
llvm-svn: 242018
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
results if the -Q option is not provided. Also took out the quietly
option from AddInitialCommand, we don't use that to set this option,
we use the override set by the -Q option.
<rdar://problem/21232087>
llvm-svn: 241652
proc_set_wakemon_params() to raise the limit on the # of wakeups
per second that are acceptable before the system may send an
EXC_RESOURCE signal to debugserver.
<rdar://problem/19631512>
llvm-svn: 241553
Summary: Use string::find(char) for single character strings.
Reviewers: abidh, ki.stfu, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10943
llvm-svn: 241390
Summary:
Many places should have been using size_t rather than MIuint or
MIint. This is particularly true for code that uses std::string::find(),
std::string::rfind(), std::string::size(), and related methods.
Reviewers: abidh, ki.stfu, domipheus
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10931
llvm-svn: 241360
Summary:
Remove unnecessary members from MICmdArgContext.
We don't need constants for these value stored in every instance
of the class.
Reviewers: ki.stfu, abidh
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10926
llvm-svn: 241357
Summary:
This is a start on bringing lldb-mi more in line with the typical
LLDB coding style. This just removes the usage of the typedefs and
doesn't yet clean up any logic or other issues. (This is to keep
the review simple.)
Reviewers: abidh, ki.stfu, domipheus
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10917
llvm-svn: 241349
This should take a "const char*" not a "char &".
Summary:
Fix type signature for CMIUtilString::IsAllValidAlphaAndNumeric.
This passes the MI tests on Mac OS X.
Reviewers: ki.stfu, abidh, domipheus
Subscribers: lldb-commits-list
Differential Revision: http://reviews.llvm.org/D10906
llvm-svn: 241322
Usually -lpthread is included due to LLVM link options,
but when LLVM threading is disabled, this does not happen.
pthread is still needed however because LLDB uses threading
regardless of whether LLVM is built with threading support or not.
Differential Revision: http://reviews.llvm.org/D5431
llvm-svn: 241006
- Avoid sending the qfThreadInfo, qsThreadInfo packets if we have a stop reply packet with the threads already (save 2 round trip packets)
- Include the qname, qserial and qkind in the JSON info
- Report the qname, qserial and qkind to the thread so it can cache it to avoid many packets on MacOSX and iOS
- Don't clear all discoverable settings when we exec, just the ones we need to saves 1-5 packets for each exec.
llvm-svn: 240988
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
A "qSymbol::" is sent when shared libraries have been loaded by hooking into the Process::ModulesDidLoad() function from within ProcessGDBRemote. This function was made virtual so that the ProcessGDBRemote version is called, which then first calls the Process::ModulesDidLoad(), and then it queries for any symbol lookups that the remote GDB server might want to do.
This allows debugserver to request the "dispatch_queue_offsets" symbol so that it can read the queue name, queue kind and queue serial number and include this data as part of the stop reply packet. Previously each thread would have to do 3 memory reads in order to read the queue name.
This is part of reducing the number of packets that are sent between LLDB and the remote GDB server.
<rdar://problem/21494354>
llvm-svn: 240466
We have been working on reducing the packet count that is sent between LLDB and the debugserver on MacOSX and iOS. Our approach to this was to reduce the packets required when debugging multiple threads. We currently make one qThreadStopInfoXXXX call (where XXXX is the thread ID in hex) per thread except the thread that stopped with a stop reply packet. In order to implement multiple thread infos in a single reply, we need to use structured data, which means JSON. The new jThreadsInfo packet will attempt to retrieve all thread infos in a single packet. The data is very similar to the stop reply packets, but packaged in JSON and uses JSON arrays where applicable. The JSON output looks like:
[
{ "tid":1580681,
"metype":6,
"medata":[2,0],
"reason":"exception",
"qaddr":140735118423168,
"registers": {
"0":"8000000000000000",
"1":"0000000000000000",
"2":"20fabf5fff7f0000",
"3":"e8f8bf5fff7f0000",
"4":"0100000000000000",
"5":"d8f8bf5fff7f0000",
"6":"b0f8bf5fff7f0000",
"7":"20f4bf5fff7f0000",
"8":"8000000000000000",
"9":"61a8db78a61500db",
"10":"3200000000000000",
"11":"4602000000000000",
"12":"0000000000000000",
"13":"0000000000000000",
"14":"0000000000000000",
"15":"0000000000000000",
"16":"960b000001000000",
"17":"0202000000000000",
"18":"2b00000000000000",
"19":"0000000000000000",
"20":"0000000000000000"},
"memory":[
{"address":140734799804592,"bytes":"c8f8bf5fff7f0000c9a59e8cff7f0000"},
{"address":140734799804616,"bytes":"00000000000000000100000000000000"}
]
}
]
It contains an array of dicitionaries with all of the key value pairs that are normally in the stop reply packet. Including the expedited registers. Notice that is also contains expedited memory in the "memory" key. Any values in this memory will get included in a new L1 cache in lldb_private::Process where if a memory read request is made and that memory request fits into one of the L1 memory cache blocks, it will use that memory data. If a memory request fails in the L1 cache, it will fall back to the L2 cache which is the same block sized caching we were using before these changes. This allows a process to expedite memory that you are likely to use and it reduces packet count. On MacOSX with debugserver, we expedite the frame pointer backchain for a thread (up to 256 entries) by reading 2 pointers worth of bytes at the frame pointer (for the previous FP and PC), and follow the backchain. Most backtraces on MacOSX and iOS now don't require us to read any memory!
We will try these packets out and if successful, we should port these to lldb-server in the near future.
<rdar://problem/21494354>
llvm-svn: 240354
ObjCARCOpts is already included by ClangCodeGen. Linking it again causes the error in PR22543.
Differential Revision: http://reviews.llvm.org/D10399
llvm-svn: 240104
For some communication channels, sending large packets can be very
slow. In those cases, it may be faster to compress the contents of
the packet on the target device and decompress it on the debug host
system. For instance, communicating with a device using something
like Bluetooth may be an environment where this tradeoff is a good one.
This patch adds a new field to the response to the "qSupported" packet
(which returns a "qXfer:features:" response) -- SupportedCompressions
and DefaultCompressionMinSize. These tell you what the remote
stub can support.
lldb, if it wants to enable compression and can handle one of those
algorithms, it can send a QEnableCompression packet specifying the
algorithm and optionally the minimum packet size to use compression
on. lldb may have better knowledge about the best tradeoff for
a given communication channel.
I added support to debugserver an lldb to use the zlib APIs
(if -DHAVE_LIBZ=1 is in CFLAGS and -lz is in LDFLAGS) and the
libcompression APIs on Mac OS X 10.11 and later
(if -DHAVE_LIBCOMPRESSION=1). libz "zlib-deflate" compression.
libcompression can support deflate, lz4, lzma, and a proprietary
lzfse algorithm. libcompression has been hand-tuned for Apple
hardware so it should be preferred if available.
debugserver currently only adds the SupportedCompressions when
it is being run on an Apple watch (TARGET_OS_WATCH). Comment
that #if out from RNBRemote.cpp if you want to enable it to
see how it works. I haven't tested this on a native system
configuration but surely it will be slower to compress & decompress
the packets in a same-system debug session.
I haven't had a chance to add support for this to
GDBRemoteCommunciationServer.cpp yet.
<rdar://problem/21090180>
llvm-svn: 240066
Summary:
Previously if an MI command had **X** mandatory and **Y** optional arguments you could provide **X** or more optional arguments without providing any of the mandatory arguments, and the argument validation code wouldn't complain.
For example this would pass argument validation even though the mandatory **address** and **count** arguments are missing:
-data-read-memory-bytes --thread 1 --frame 0
Part of the problem was that an empty string was considered a valid value for a mandatory argument, which didn't make much sense.
Patch by Vadim Macagon. Thanks!
Test Plan:
./dotest.py -A x86_64 -C clang --executable $BUILDDIR/bin/lldb tools/lldb-mi/
No unexpected failures on my Ubuntu 14.10 64bit Virtualbox VM.
Reviewers: domipheus, ki.stfu, abidh
Reviewed By: ki.stfu, abidh
Subscribers: brucem, lldb-commits
Differential Revision: http://reviews.llvm.org/D10299
llvm-svn: 239297
LLDB included editline in a couple of places, not respecting LLDB_DISABLE_LIBEDIT. As far as I can tell, these includes are not used, so I am removing them.
llvm-svn: 239199
a little more resilient to freely formatted json. Greg's change
in r238279 made the json output from StructuredData unconditionally
pretty-printed and the spaces were confusing debugserver.
llvm-svn: 239013
Summary:
Several changes to fix CMake builds of LLDB with the
BUILD_SHARED_LIBS setting on.
- Force all internal libraries to be built STATIC.
- Add additional library dependencies (pthread, dl,
runtimedyld).
- modify finalisation of SWIG wrapper to symlink the
"lib" dir into python/site-packages, so _lldb.so's
RPATH resolves.
Test Plan: Verified one test case with "dotest.py".
Reviewers: sylvestre.ledru, zturner
Reviewed By: zturner
Subscribers: zturner, ted, tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D10157
llvm-svn: 239007
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
qEcho:%s
where '%s' is any valid string. The response to this packet is the exact packet itself with no changes, just reply with what you received!
This will help us to recover from packets timing out much more gracefully. Currently if a packet times out, LLDB quickly will hose up the debug session. For example, if we send a "abc" packet and we expect "ABC" back in response, but the "abc" command takes longer than the current timeout value this will happen:
--> "abc"
<-- <<<error: timeout>>>
Now we want to send "def" and get "DEF" back:
--> "def"
<-- "ABC"
We got the wrong response for the "def" packet because we didn't sync up with the server to clear any current responses from previously issues commands.
The fix is to modify GDBRemoteCommunication::WaitForPacketWithTimeoutMicroSecondsNoLock() so that when it gets a timeout, it syncs itself up with the client by sending a "qEcho:%u" where %u is an increasing integer, one for each time we timeout. We then wait for 3 timeout periods to sync back up. So the above "abc" session would look like:
--> "abc"
<-- <<<error: timeout>>> 1 second
--> "qEcho:1"
<-- <<<error: timeout>>> 1 second
<-- <<<error: timeout>>> 1 second
<-- "abc"
<-- "qEcho:1"
The first timeout is from trying to get the response, then we know we timed out and we send the "qEcho:1" packet and wait for 3 timeout periods to get back in sync knowing that we might actually get the response for the "abc" packet in the mean time...
In this case we would actually succeed in getting the response for "abc". But lets say the remote GDB server is deadlocked and will never response, it would look like:
--> "abc"
<-- <<<error: timeout>>> 1 second
--> "qEcho:1"
<-- <<<error: timeout>>> 1 second
<-- <<<error: timeout>>> 1 second
<-- <<<error: timeout>>> 1 second
We then disconnect and say we lost connection.
We might also have a bad GDB server that just dropped the "abc" packet on the floor. We can still recover in this case and it would look like:
--> "abc"
<-- <<<error: timeout>>> 1 second
--> "qEcho:1"
<-- "qEcho:1"
Then we know our remote GDB server is still alive and well, and it just dropped the "abc" response on the floor and we can continue to debug.
<rdar://problem/21082939>
llvm-svn: 238530
This change also get rid of an unused Debugger instance in
GDBRemoteCommunicationServerLLGS and the command interpreter from
lldb-platform what was used only for enabling logging.
Differential revision: http://reviews.llvm.org/D9876
llvm-svn: 238319
We know have on API we should use for all XML within LLDB in XML.h. This API will be easy back the XML parsing by different libraries in case libxml2 doesn't work on all platforms. It also allows the only place for #ifdef ...XML... to be in XML.h and XML.cpp. The API is designed so it will still compile with or without XML support and there is a static function "bool XMLDocument::XMLEnabled()" that can be called to see if XML is currently supported. All APIs will return errors, false, or nothing when XML isn't enabled.
Converted all locations that used XML over to using the host XML implementation.
Added target.xml support to debugserver. Extended the XML register format to work for LLDB by including extra attributes and elements where needed. This allows the target.xml to replace the qRegisterInfo packets and allows us to fetch all register info in a single packet.
<rdar://problem/21090173>
llvm-svn: 238224
If binding to port 0 is selected, the actual port is printed.
This improves the reliability of platform startup by ensuring that
a free port can be found.
TEST PLAN
./lldb-server platform --listen *:0
Listening for a connection from <port-number>...
Will appear on stdout (with other stuff potentially)
llvm-svn: 238173
# Add CMICmdArgValPrintValues argument
# Rework -stack-list-arguments/-stack-list-locals/-stack-list-variables/-var-update/-var-list-children
commands to use the CMICmdArgValPrintValues argument instead of usage of pair of non-mandatory
arguments like: CMICmdArgValNumber(0) || CMICmdArgValLongOptions("no-values")
llvm-svn: 237429
Summary:
This patch fixes/cleans code around of (gdb) prompt:
# Add CMICmnStreamStdout::WritePrompt
# Clean up CMICmnStreamStdout::TextToStdout (don't lock
the m_mutex twice because it will be locked in CMICmnStreamStdout::WritePriv)
# Remove unused CMICmnStreamStdin::m_bShowPrompt field
# Refactor CMICmnLLDBDebuggerHandleEvents to use CMICmnStreamStdout::WritePrompt
instead of TextToStdout("(gdb)")
# Refactor CMIDriver to use CMICmnStreamStdout::WritePrompt instead of
```
if (bOk && m_rStdin.GetEnablePrompt())
bOk = m_rStdOut.WriteMIResponse(m_rStdin.GetPrompt());
```
Test Plan: ./dotest.py -v --executable $BUILDDIR/bin/lldb tools/lldb-mi/
Reviewers: abidh
Reviewed By: abidh
Subscribers: lldb-commits, abidh
Differential Revision: http://reviews.llvm.org/D9737
llvm-svn: 237248
Removed some unused variables, added some consts, changed some casts
to const_cast. I don't think any of these changes are very
controversial.
Differential Revision: http://reviews.llvm.org/D9674
llvm-svn: 237218
Summary:
When -var-create fails, we will now show the error message from the failed evaluation if it is available.
Patch from chuckr@microsoft.com
Test Plan: I fixed the MiVarTestCase.test_lldbmi_eval test to expect the new error string. All MI tests passing on OS X.
Reviewers: abidh, ChuckR
Subscribers: greggm, lldb-commits, paulmaybee
Differential Revision: http://reviews.llvm.org/D9691
llvm-svn: 237094
Summary:
New dotest options that allow arbitrary log channels and
categories to be enabled. Also enables logging for locally run
debug servers.
Log messages are separated into separate files per test case.
(this makes it possible to log in dosep runs)
These new log files are stored side-by-side with trace files in the
session directory.
These files are deleted by default if the test run is successful.
If --log-success is specified, even successful logs are retained.
--log-success is useful for creating reference log files.
Test Plan:
add '--channel "lldb all" --channel "gdb-remote packets" --log-success'
to your dotest options
Tested on OSX and Linux
Differential Revision: http://reviews.llvm.org/D9594
llvm-svn: 236956
This patch includes the following changes:
# Add CMIUtilString::ConvertToASCII to convert unicode to ASCII (MI)
# Rework CMICmnLLDBUtilSBValue::GetSimpleValue to print wide/unicode char (MI)
## Add CMICmnLLDBUtilSBValue::GetSimpleValueChar
## Extend CMICmnLLDBUtilSBValue::IsCharType to accept char16_t/char32_t
## Don't ignore the fail_value in SBValue::GetValueAsUnsigned
# Rework CMIUtilString::ConvertToASCII (MI)
## Don't use templates
## Change the function signature to convert signle characters (was std::basic_string)
## Rename CMIUtilString::ConvertToASCII to CMIUtilString::ConvertToPrintableASCII
# Add CMIUtilString::ConvertToPrintableASCII for char (MI)
## Refactor CMIUtilString::Escape
## Simplify CMICmnLLDBUtilSBValue::GetSimpleValueChar for char
# Add char16_t* and char32_t* support in CMICmnLLDBUtilSBValue::GetSimpleValue (MI)
## Add CMICmnLLDBUtilSBValue::GetSimpleValueCStringPointer
## Add CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2
(it's extended version of CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory)
# Improve error checking in CMICmnLLDBUtilSBValue::GetSimpleValueChar (MI)
# Refactor CMICmnLLDBUtilSBValue (MI)
## Remove CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory
(use CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2 instead)
## Rename CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2 to
CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory
## Move CMICmnLLDBUtilSBValue::GetValueCString to private methods
## Rename CMICmnLLDBUtilSBValue::GetValueCString to
CMICmnLLDBUtilSBValue::GetSimpleValueCStringArray
## Remove CMICmnLLDBUtilSBValue::GetChildValueCString
# Improve MiGdbSetShowTestCase.test_lldbmi_gdb_set_show_print_char_array_as_string test to check char16_t/char32_t (MI)
# Fix CMICmnLLDBUtilSBValue::GetSimpleValueCStringArray for Unicode (MI)
## Fix handling of char16_t and char32_t
## Improve CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory to read
variables of type char[]: add vnMaxLen argument
## Turn on few cases to check char16_t[] and char32_t[] output in
MiGdbSetShowTestCase.test_lldbmi_gdb_set_show_print_char_array_as_string
# Remove unnecessary checks in CMICmnLLDBUtilSBValue (MI)
llvm-svn: 236827
This patch incldues the following:
# Add from/to arguments in -var-list-children command (MI)
## Handle from and to args
## Don't print children=[] if numchild is 0
## A bit refactoring
## Add MiVarTestCase.test_lldbmi_var_list_children test
# Refactor -var-list-children (MI)
## Remove CMICmdCmdVarListChildren::VecMIValueResult_t
## Add CMICmdCmdVarListChildren::m_miValueList
## Remove CMICmdCmdVarListChildren::m_vecMiValueResult
(use CMICmdCmdVarListChildren::m_miValueList instead)
## Print error message if value is invalid:
```
^error,msg="variable invalid"
```
## Refactor CMICmdCmdVarListChildren::Acknowledge and remove duplicated code
## Don't print children=[] if numchild is 0
## Add error checking
## Use CMICmnLLDBDebugSessionInfo::VariableInfoFormat_e for print-values
## Add few more empty-range test cases in MiVarTestCase.test_lldbmi_var_list_children
#Improve MiVarTestCase.test_lldbmi_var_list_children test (MI)
llvm-svn: 236820
It was just detecting the existance of the value. If it gets the value correctly, we need to check that it is non-zero to see if cpu64bit_capable should be true.
<rdar://problem/20857426>
llvm-svn: 236759
Summary:
This changes add -target-attach and -target-detach.
-target-attach allows lldb-mi to attach to an existing process by it's process id, matching gdb mi's syntax of '-target-attach <pid'. Additionally, support has been added for attaching to a process by name using '-target-attach -n <name>'. Combining this with --waitfor will allow lldb mi to attach to a process by name when the process starts.
-target-detach simply detaches from the current process
Patch from chuckr@microsoft.com
Test Plan: I have added three tests, one each for -target-attach <pid>, -target-attach -n <name>, and -target-attach -n <name> --waitfor
Reviewers: paulmaybee, abidh, ChuckR
Subscribers: greggm, lldb-commits
Differential Revision: http://reviews.llvm.org/D9484
llvm-svn: 236705
Summary:
- The address argument can now be an expression (e.g. &array), it's no longer restricted to being just a number literal.
- The -o (offset) option is now properly handled, not just silently ignored.
- The --thread option is now properly handled.
- A new --frame option has been added for consistency with GDB.
- Added a new test to verify old and new functionality.
Patch by Vadim Macagon. Thanks!
Test Plan: ./dotest.py -A x86_64 -C clang --executable $BUILDDIR/bin/lldb tools/lldb-mi/data
Reviewers: domipheus, abidh, ki.stfu
Reviewed By: abidh, ki.stfu
Subscribers: brucem, lldb-commits
Differential Revision: http://reviews.llvm.org/D9470
llvm-svn: 236694
This command is able to list both local variables and stack arguments for a specific thread/frame.
Args are denoted with 'arg="1"'.
Patch from Chuck Ries.
llvm-svn: 236090
During testing -data-list-register-values, I saw a crash here due to buffer overflow.
This commit should fix the crash. There is still problem with printing 1-byte register
in some cases that I will fix separately.
No regression on MI test cases.
llvm-svn: 235991
Summary:
When using GDB with MI, if there aren't children for a variable,
it doesn't include a "children" value in the response. LLDB does
and sets it to "[]" while variables with children have an unquoted
list: children=[...].
This removes the children value entirely when there are no children
making this match GDB in behavior.
Test Plan: Ran tests on Mac OS X and they passed.
Reviewers: abidh, domipheus
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9320
llvm-svn: 235974
Summary:
Currently, launching lldb-gdbserver from platform on Android requires root for
mkfifo() and an explicit TMPDIR variable. This should remove both requirements.
Test Plan: Successfully launched lldb-gdbserver on a non-rooted Android device.
Reviewers: tberghammer, vharron, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9307
llvm-svn: 235940
Currently hitting Ctrl-C in Windows LLDB-MI just exits MI. But according to test_lldbmi_stopped_when_interrupt() in TestMiSignal.py Ctrl-C should send a SIGINT signal to the inferior.
Patch adds this functionality to Windows so SIGINT is sent on Ctrl-C.
Patch from EwanCrawford. Reviewed in http://reviews.llvm.org/D9248.
llvm-svn: 235887
This patch does the following things:
* Use CMICmnStreamStdout::TextToStdout to print (gdb) prompt in CMIDriver::InitClientIDEEclipse
* Remove unnecessary inclusions
llvm-svn: 235817
Don't call the lldb::SBProcess::GetRestartedFromEvent twice while
handling the CMICmnLLDBDebuggerHandleEvents::HandleProcessEventStateSuspended.
llvm-svn: 235812
Summary:
Currently if two instances of lldb-mi are running with logging enabled using '--log' the log file conflicts. This produces the following error
MI: Error: File Handler. Error Permission denied opening 'C:\Users\Ewan\LLVM\build\Debug\bin\lldb-mi-log.txt'
Fixed in this patch by renaming lldb-mi-log.txt based on the date, e.g. lldb-mi-log.txt-20150316163631.log, and moving the file into the temp directory by using the --log-dir option.
Regrading previous review comments the P_tmpdir macro is defined in Windows but always points to "\", which doesn't help much. Also when using the Windows API for GetTempPath() dynamic memory seems much more messy.
Patch from ewan@codeplay.com
Reviewers: abidh, EwanCrawford
Subscribers: zturner, lldb-commits, deepak2427
Differential Revision: http://reviews.llvm.org/D9054
llvm-svn: 235589
Summary:
My understanding of the Windows API call GetLastError() is that it should only be checked when ::GetModuleFileName() returns 0 on error.
Otherwise GetExecutablesPath() could return an error despite nLen being valid if GetLastError() was inconsistent.
Patch updates function to only call GetOSLastError() when nLen == 0
Patch from ewan@codeplay.com
Reviewers: EwanCrawford
Subscribers: lldb-commits, deepak2427
Differential Revision: http://reviews.llvm.org/D9154
llvm-svn: 235515
Summary:
This command is currently processed using expression evaluation, meaning the variable binds to the result of the expression not the register.
Therefore any subsequent calls to '-var-assign' will not update the register. Fixed by detecting '$' prefix for registers according to specification.
Thanks, Ewan
Patch from ewan@codeplay.com
Reviewers: EwanCrawford
Subscribers: lldb-commits, deepak2427
Differential Revision: http://reviews.llvm.org/D8965
llvm-svn: 235195
Summary:
This is the first phase of the merging of Monitor and Operation threads in NativeProcessLinux
(which is necessary since the two threads race inside Linux kernel). Here, I reimplement the
Monitor thread do use non-blocking waitpid calls, which enables later addition of code from the
operation thread.
Test Plan: Ran the test suite a couple of times, no regressions detected.
Reviewers: vharron, ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9048
llvm-svn: 235193
Summary:
This patch adds the comments which are included in LLDB disassembly, but are currently missing in MI, e.g.
^done,asm_insns=[...,{address="0x00000000004004ff",func-name="main",offset="18",size="2",inst="jmp 0x40050b ; <+30> at main.c:7"}]
instead of
^done,asm_insns=[...,{address="0x00000000004004ff",func-name="main",offset="18",size="2",inst="jmp 0x40050b"}]
Thanks, Ewan
Patch from ewan@codeplay.com
Reviewers: abidh, EwanCrawford
Subscribers: ted, lldb-commits, deepak2427
Differential Revision: http://reviews.llvm.org/D8964
llvm-svn: 235017
* Don't use the CMICmdArgValFile::GetFileNamePath for the CMIDriver::m_strCmdLineArgExecuteableFileNamePath
because it wraps path with spaces into quotes what is already being done in CMIDriver::LocalDebugSessionStartupExecuteCommands
* Improve the MiSyntaxTestCase.test_lldbmi_specialchars test to catch this error
```
$ bin/lldb-mi "~/p/ hello"
(gdb)
-file-exec-and-symbols "\"~/p/ hello\""
^error,msg="Command 'file-exec-and-symbols'. Target binary '\"~/p/ hello\"' is invalid. error: unable to find executable for '/"~/p/ hello/"'"
```
llvm-svn: 234888
Summary:
This checkin sends an MI event when a module is loaded that causes a pending breakpoint to bind to it's real address in the target. This allows breakpoints to be set before the process is launched, and the target address of the BP to be discovered when the module loads, prior to the breakpoint being hit.
Patch from chuckr@microsoft.com
Test Plan:
I ran the check-lldb target with and without this patch and saw no change. I am unsure of how to write an MI specific test for this because the new event is buried in module load events. Here is an example (the new event is in bold):
```
(gdb)
-file-exec-and-symbols a.out
^done
(gdb)
=shlibs-added,shlib-info=[num="1",name="a.out",dyld-addr="-",reason="dyld",path="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/a.out",loaded_addr="-",dsym-objpath="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/a.out.dSYM/Contents/Resources/DWARF/a.out"]
-break-insert -f main.cpp:15
^done,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0xffffffffffffffff",func="main",file="main.cpp",fullname="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/main.cpp",line="15",pending=["main.cpp:15"],times="0",original-location="main.cpp:15"}
(gdb)
=breakpoint-modified,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0xffffffffffffffff",func="main",file="main.cpp",fullname="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/main.cpp",line="15",pending=["main.cpp:15"],times="0",original-location="main.cpp:15"}
-exec-run
^running
=thread-group-started,id="i1",pid="75620"
(gdb)
=thread-created,id="1",group-id="i1"
=thread-selected,id="1"
(gdb)
=shlibs-added,shlib-info=[num="2",name="dyld",dyld-addr="0x7fff5fc00000",reason="dyld",path="/usr/lib/dyld",loaded_addr="0x7fff5fc00000"]
(gdb)
=shlibs-added,shlib-info=[num="3",name="dyld",dyld-addr="0x7fff5fc00000",reason="dyld",path="/usr/lib/dyld",loaded_addr="0x7fff5fc00000"]
(gdb)
*running,thread-id="all"
(gdb)
(gdb)
=shlibs-added,shlib-info=[num="4",name="libc++.1.dylib",dyld-addr="0x7fff85dd0000",reason="dyld",path="/usr/lib/libc++.1.dylib",loaded_addr="0x7fff85dd0000"]
(gdb)
=shlibs-added,shlib-info=[num="5",name="libSystem.B.dylib",dyld-addr="0x7fff851ab000",reason="dyld",path="/usr/lib/libSystem.B.dylib",loaded_addr="0x7fff851ab000"]
(gdb)
=shlibs-added,shlib-info=[num="6",name="libc++abi.dylib",dyld-addr="0x7fff81be8000",reason="dyld",path="/usr/lib/libc++abi.dylib",loaded_addr="0x7fff81be8000"]
(gdb)
=shlibs-added,shlib-info=[num="7",name="libcache.dylib",dyld-addr="0x7fff8b975000",reason="dyld",path="/usr/lib/system/libcache.dylib",loaded_addr="0x7fff8b975000"]
(gdb)
=shlibs-added,shlib-info=[num="8",name="libcommonCrypto.dylib",dyld-addr="0x7fff85d14000",reason="dyld",path="/usr/lib/system/libcommonCrypto.dylib",loaded_addr="0x7fff85d14000"]
(gdb)
=shlibs-added,shlib-info=[num="9",name="libcompiler_rt.dylib",dyld-addr="0x7fff86154000",reason="dyld",path="/usr/lib/system/libcompiler_rt.dylib",loaded_addr="0x7fff86154000"]
(gdb)
=shlibs-added,shlib-info=[num="10",name="libcopyfile.dylib",dyld-addr="0x7fff81ac7000",reason="dyld",path="/usr/lib/system/libcopyfile.dylib",loaded_addr="0x7fff81ac7000"]
(gdb)
=shlibs-added,shlib-info=[num="11",name="libcorecrypto.dylib",dyld-addr="0x7fff87d5d000",reason="dyld",path="/usr/lib/system/libcorecrypto.dylib",loaded_addr="0x7fff87d5d000"]
(gdb)
=shlibs-added,shlib-info=[num="12",name="libdispatch.dylib",dyld-addr="0x7fff8ea8c000",reason="dyld",path="/usr/lib/system/libdispatch.dylib",loaded_addr="0x7fff8ea8c000"]
(gdb)
=shlibs-added,shlib-info=[num="13",name="libdyld.dylib",dyld-addr="0x7fff89087000",reason="dyld",path="/usr/lib/system/libdyld.dylib",loaded_addr="0x7fff89087000"]
(gdb)
=shlibs-added,shlib-info=[num="14",name="libkeymgr.dylib",dyld-addr="0x7fff8e818000",reason="dyld",path="/usr/lib/system/libkeymgr.dylib",loaded_addr="0x7fff8e818000"]
(gdb)
=shlibs-added,shlib-info=[num="15",name="liblaunch.dylib",dyld-addr="0x7fff84936000",reason="dyld",path="/usr/lib/system/liblaunch.dylib",loaded_addr="0x7fff84936000"]
(gdb)
=shlibs-added,shlib-info=[num="16",name="libmacho.dylib",dyld-addr="0x7fff8534e000",reason="dyld",path="/usr/lib/system/libmacho.dylib",loaded_addr="0x7fff8534e000"]
(gdb)
=shlibs-added,shlib-info=[num="17",name="libquarantine.dylib",dyld-addr="0x7fff90f97000",reason="dyld",path="/usr/lib/system/libquarantine.dylib",loaded_addr="0x7fff90f97000"]
(gdb)
=shlibs-added,shlib-info=[num="18",name="libremovefile.dylib",dyld-addr="0x7fff8ccb5000",reason="dyld",path="/usr/lib/system/libremovefile.dylib",loaded_addr="0x7fff8ccb5000"]
(gdb)
=shlibs-added,shlib-info=[num="19",name="libsystem_asl.dylib",dyld-addr="0x7fff8df67000",reason="dyld",path="/usr/lib/system/libsystem_asl.dylib",loaded_addr="0x7fff8df67000"]
(gdb)
=shlibs-added,shlib-info=[num="20",name="libsystem_blocks.dylib",dyld-addr="0x7fff8621c000",reason="dyld",path="/usr/lib/system/libsystem_blocks.dylib",loaded_addr="0x7fff8621c000"]
(gdb)
=shlibs-added,shlib-info=[num="21",name="libsystem_c.dylib",dyld-addr="0x7fff83c0f000",reason="dyld",path="/usr/lib/system/libsystem_c.dylib",loaded_addr="0x7fff83c0f000"]
(gdb)
=shlibs-added,shlib-info=[num="22",name="libsystem_configuration.dylib",dyld-addr="0x7fff8fd71000",reason="dyld",path="/usr/lib/system/libsystem_configuration.dylib",loaded_addr="0x7fff8fd71000"]
(gdb)
=shlibs-added,shlib-info=[num="23",name="libsystem_coreservices.dylib",dyld-addr="0x7fff8a028000",reason="dyld",path="/usr/lib/system/libsystem_coreservices.dylib",loaded_addr="0x7fff8a028000"]
(gdb)
=shlibs-added,shlib-info=[num="24",name="libsystem_coretls.dylib",dyld-addr="0x7fff90996000",reason="dyld",path="/usr/lib/system/libsystem_coretls.dylib",loaded_addr="0x7fff90996000"]
(gdb)
=shlibs-added,shlib-info=[num="25",name="libsystem_dnssd.dylib",dyld-addr="0x7fff8b71f000",reason="dyld",path="/usr/lib/system/libsystem_dnssd.dylib",loaded_addr="0x7fff8b71f000"]
(gdb)
=shlibs-added,shlib-info=[num="26",name="libsystem_info.dylib",dyld-addr="0x7fff8b9f2000",reason="dyld",path="/usr/lib/system/libsystem_info.dylib",loaded_addr="0x7fff8b9f2000"]
(gdb)
=shlibs-added,shlib-info=[num="27",name="libsystem_kernel.dylib",dyld-addr="0x7fff81ad0000",reason="dyld",path="/usr/lib/system/libsystem_kernel.dylib",loaded_addr="0x7fff81ad0000"]
(gdb)
=shlibs-added,shlib-info=[num="28",name="libsystem_m.dylib",dyld-addr="0x7fff84953000",reason="dyld",path="/usr/lib/system/libsystem_m.dylib",loaded_addr="0x7fff84953000"]
(gdb)
=shlibs-added,shlib-info=[num="29",name="libsystem_malloc.dylib",dyld-addr="0x7fff887bd000",reason="dyld",path="/usr/lib/system/libsystem_malloc.dylib",loaded_addr="0x7fff887bd000"]
(gdb)
=shlibs-added,shlib-info=[num="30",name="libsystem_network.dylib",dyld-addr="0x7fff88304000",reason="dyld",path="/usr/lib/system/libsystem_network.dylib",loaded_addr="0x7fff88304000"]
(gdb)
=shlibs-added,shlib-info=[num="31",name="libsystem_networkextension.dylib",dyld-addr="0x7fff82085000",reason="dyld",path="/usr/lib/system/libsystem_networkextension.dylib",loaded_addr="0x7fff82085000"]
(gdb)
=shlibs-added,shlib-info=[num="32",name="libsystem_notify.dylib",dyld-addr="0x7fff8eb69000",reason="dyld",path="/usr/lib/system/libsystem_notify.dylib",loaded_addr="0x7fff8eb69000"]
(gdb)
=shlibs-added,shlib-info=[num="33",name="libsystem_platform.dylib",dyld-addr="0x7fff89ac7000",reason="dyld",path="/usr/lib/system/libsystem_platform.dylib",loaded_addr="0x7fff89ac7000"]
(gdb)
=shlibs-added,shlib-info=[num="34",name="libsystem_pthread.dylib",dyld-addr="0x7fff83ff8000",reason="dyld",path="/usr/lib/system/libsystem_pthread.dylib",loaded_addr="0x7fff83ff8000"]
(gdb)
=shlibs-added,shlib-info=[num="35",name="libsystem_sandbox.dylib",dyld-addr="0x7fff89084000",reason="dyld",path="/usr/lib/system/libsystem_sandbox.dylib",loaded_addr="0x7fff89084000"]
(gdb)
=shlibs-added,shlib-info=[num="36",name="libsystem_secinit.dylib",dyld-addr="0x7fff8e816000",reason="dyld",path="/usr/lib/system/libsystem_secinit.dylib",loaded_addr="0x7fff8e816000"]
(gdb)
=shlibs-added,shlib-info=[num="37",name="libsystem_stats.dylib",dyld-addr="0x7fff89eaf000",reason="dyld",path="/usr/lib/system/libsystem_stats.dylib",loaded_addr="0x7fff89eaf000"]
(gdb)
=shlibs-added,shlib-info=[num="38",name="libsystem_trace.dylib",dyld-addr="0x7fff8ead4000",reason="dyld",path="/usr/lib/system/libsystem_trace.dylib",loaded_addr="0x7fff8ead4000"]
(gdb)
=shlibs-added,shlib-info=[num="39",name="libunc.dylib",dyld-addr="0x7fff8ab27000",reason="dyld",path="/usr/lib/system/libunc.dylib",loaded_addr="0x7fff8ab27000"]
(gdb)
=shlibs-added,shlib-info=[num="40",name="libunwind.dylib",dyld-addr="0x7fff85cf3000",reason="dyld",path="/usr/lib/system/libunwind.dylib",loaded_addr="0x7fff85cf3000"]
(gdb)
=shlibs-added,shlib-info=[num="41",name="libxpc.dylib",dyld-addr="0x7fff88896000",reason="dyld",path="/usr/lib/system/libxpc.dylib",loaded_addr="0x7fff88896000"]
(gdb)
=shlibs-added,shlib-info=[num="42",name="libobjc.A.dylib",dyld-addr="0x7fff84f13000",reason="dyld",path="/usr/lib/libobjc.A.dylib",loaded_addr="0x7fff84f13000"]
(gdb)
=shlibs-added,shlib-info=[num="43",name="libauto.dylib",dyld-addr="0x7fff85d89000",reason="dyld",path="/usr/lib/libauto.dylib",loaded_addr="0x7fff85d89000"]
(gdb)
=shlibs-added,shlib-info=[num="44",name="libDiagnosticMessagesClient.dylib",dyld-addr="0x7fff822e1000",reason="dyld",path="/usr/lib/libDiagnosticMessagesClient.dylib",loaded_addr="0x7fff822e1000"]
```
=breakpoint-modified,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0x0000000100000f4d",func="main",file="main.cpp",fullname="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/main.cpp",line="15",pending=["main.cpp:15"],times="0",original-location="main.cpp:15"}
```
(gdb)
=shlibs-added,shlib-info=[num="45",name="a.out",dyld-addr="0x100000000",reason="dyld",path="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/a.out",loaded_addr="0x100000000",dsym-objpath="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/a.out.dSYM/Contents/Resources/DWARF/a.out"]
=shlibs-added,shlib-info=[num="46",name="libc++.1.dylib",dyld-addr="0x7fff85dd0000",reason="dyld",path="/usr/lib/libc++.1.dylib",loaded_addr="0x7fff85dd0000"]
=shlibs-added,shlib-info=[num="47",name="libSystem.B.dylib",dyld-addr="0x7fff851ab000",reason="dyld",path="/usr/lib/libSystem.B.dylib",loaded_addr="0x7fff851ab000"]
=shlibs-added,shlib-info=[num="48",name="libc++abi.dylib",dyld-addr="0x7fff81be8000",reason="dyld",path="/usr/lib/libc++abi.dylib",loaded_addr="0x7fff81be8000"]
=shlibs-added,shlib-info=[num="49",name="libcache.dylib",dyld-addr="0x7fff8b975000",reason="dyld",path="/usr/lib/system/libcache.dylib",loaded_addr="0x7fff8b975000"]
=shlibs-added,shlib-info=[num="50",name="libcommonCrypto.dylib",dyld-addr="0x7fff85d14000",reason="dyld",path="/usr/lib/system/libcommonCrypto.dylib",loaded_addr="0x7fff85d14000"]
=shlibs-added,shlib-info=[num="51",name="libcompiler_rt.dylib",dyld-addr="0x7fff86154000",reason="dyld",path="/usr/lib/system/libcompiler_rt.dylib",loaded_addr="0x7fff86154000"]
=shlibs-added,shlib-info=[num="52",name="libcopyfile.dylib",dyld-addr="0x7fff81ac7000",reason="dyld",path="/usr/lib/system/libcopyfile.dylib",loaded_addr="0x7fff81ac7000"]
=shlibs-added,shlib-info=[num="53",name="libcorecrypto.dylib",dyld-addr="0x7fff87d5d000",reason="dyld",path="/usr/lib/system/libcorecrypto.dylib",loaded_addr="0x7fff87d5d000"]
=shlibs-added,shlib-info=[num="54",name="libdispatch.dylib",dyld-addr="0x7fff8ea8c000",reason="dyld",path="/usr/lib/system/libdispatch.dylib",loaded_addr="0x7fff8ea8c000"]
=shlibs-added,shlib-info=[num="55",name="libdyld.dylib",dyld-addr="0x7fff89087000",reason="dyld",path="/usr/lib/system/libdyld.dylib",loaded_addr="0x7fff89087000"]
=shlibs-added,shlib-info=[num="56",name="libkeymgr.dylib",dyld-addr="0x7fff8e818000",reason="dyld",path="/usr/lib/system/libkeymgr.dylib",loaded_addr="0x7fff8e818000"]
=shlibs-added,shlib-info=[num="57",name="liblaunch.dylib",dyld-addr="0x7fff84936000",reason="dyld",path="/usr/lib/system/liblaunch.dylib",loaded_addr="0x7fff84936000"]
=shlibs-added,shlib-info=[num="58",name="libmacho.dylib",dyld-addr="0x7fff8534e000",reason="dyld",path="/usr/lib/system/libmacho.dylib",loaded_addr="0x7fff8534e000"]
=shlibs-added,shlib-info=[num="59",name="libquarantine.dylib",dyld-addr="0x7fff90f97000",reason="dyld",path="/usr/lib/system/libquarantine.dylib",loaded_addr="0x7fff90f97000"]
=shlibs-added,shlib-info=[num="60",name="libremovefile.dylib",dyld-addr="0x7fff8ccb5000",reason="dyld",path="/usr/lib/system/libremovefile.dylib",loaded_addr="0x7fff8ccb5000"]
=shlibs-added,shlib-info=[num="61",name="libsystem_asl.dylib",dyld-addr="0x7fff8df67000",reason="dyld",path="/usr/lib/system/libsystem_asl.dylib",loaded_addr="0x7fff8df67000"]
=shlibs-added,shlib-info=[num="62",name="libsystem_blocks.dylib",dyld-addr="0x7fff8621c000",reason="dyld",path="/usr/lib/system/libsystem_blocks.dylib",loaded_addr="0x7fff8621c000"]
=shlibs-added,shlib-info=[num="63",name="libsystem_c.dylib",dyld-addr="0x7fff83c0f000",reason="dyld",path="/usr/lib/system/libsystem_c.dylib",loaded_addr="0x7fff83c0f000"]
=shlibs-added,shlib-info=[num="64",name="libsystem_configuration.dylib",dyld-addr="0x7fff8fd71000",reason="dyld",path="/usr/lib/system/libsystem_configuration.dylib",loaded_addr="0x7fff8fd71000"]
=shlibs-added,shlib-info=[num="65",name="libsystem_coreservices.dylib",dyld-addr="0x7fff8a028000",reason="dyld",path="/usr/lib/system/libsystem_coreservices.dylib",loaded_addr="0x7fff8a028000"]
=shlibs-added,shlib-info=[num="66",name="libsystem_coretls.dylib",dyld-addr="0x7fff90996000",reason="dyld",path="/usr/lib/system/libsystem_coretls.dylib",loaded_addr="0x7fff90996000"]
=shlibs-added,shlib-info=[num="67",name="libsystem_dnssd.dylib",dyld-addr="0x7fff8b71f000",reason="dyld",path="/usr/lib/system/libsystem_dnssd.dylib",loaded_addr="0x7fff8b71f000"]
=shlibs-added,shlib-info=[num="68",name="libsystem_info.dylib",dyld-addr="0x7fff8b9f2000",reason="dyld",path="/usr/lib/system/libsystem_info.dylib",loaded_addr="0x7fff8b9f2000"]
=shlibs-added,shlib-info=[num="69",name="libsystem_kernel.dylib",dyld-addr="0x7fff81ad0000",reason="dyld",path="/usr/lib/system/libsystem_kernel.dylib",loaded_addr="0x7fff81ad0000"]
=shlibs-added,shlib-info=[num="70",name="libsystem_m.dylib",dyld-addr="0x7fff84953000",reason="dyld",path="/usr/lib/system/libsystem_m.dylib",loaded_addr="0x7fff84953000"]
=shlibs-added,shlib-info=[num="71",name="libsystem_malloc.dylib",dyld-addr="0x7fff887bd000",reason="dyld",path="/usr/lib/system/libsystem_malloc.dylib",loaded_addr="0x7fff887bd000"]
=shlibs-added,shlib-info=[num="72",name="libsystem_network.dylib",dyld-addr="0x7fff88304000",reason="dyld",path="/usr/lib/system/libsystem_network.dylib",loaded_addr="0x7fff88304000"]
=shlibs-added,shlib-info=[num="73",name="libsystem_networkextension.dylib",dyld-addr="0x7fff82085000",reason="dyld",path="/usr/lib/system/libsystem_networkextension.dylib",loaded_addr="0x7fff82085000"]
=shlibs-added,shlib-info=[num="74",name="libsystem_notify.dylib",dyld-addr="0x7fff8eb69000",reason="dyld",path="/usr/lib/system/libsystem_notify.dylib",loaded_addr="0x7fff8eb69000"]
=shlibs-added,shlib-info=[num="75",name="libsystem_platform.dylib",dyld-addr="0x7fff89ac7000",reason="dyld",path="/usr/lib/system/libsystem_platform.dylib",loaded_addr="0x7fff89ac7000"]
=shlibs-added,shlib-info=[num="76",name="libsystem_pthread.dylib",dyld-addr="0x7fff83ff8000",reason="dyld",path="/usr/lib/system/libsystem_pthread.dylib",loaded_addr="0x7fff83ff8000"]
=shlibs-added,shlib-info=[num="77",name="libsystem_sandbox.dylib",dyld-addr="0x7fff89084000",reason="dyld",path="/usr/lib/system/libsystem_sandbox.dylib",loaded_addr="0x7fff89084000"]
=shlibs-added,shlib-info=[num="78",name="libsystem_secinit.dylib",dyld-addr="0x7fff8e816000",reason="dyld",path="/usr/lib/system/libsystem_secinit.dylib",loaded_addr="0x7fff8e816000"]
=shlibs-added,shlib-info=[num="79",name="libsystem_stats.dylib",dyld-addr="0x7fff89eaf000",reason="dyld",path="/usr/lib/system/libsystem_stats.dylib",loaded_addr="0x7fff89eaf000"]
=shlibs-added,shlib-info=[num="80",name="libsystem_trace.dylib",dyld-addr="0x7fff8ead4000",reason="dyld",path="/usr/lib/system/libsystem_trace.dylib",loaded_addr="0x7fff8ead4000"]
=shlibs-added,shlib-info=[num="81",name="libunc.dylib",dyld-addr="0x7fff8ab27000",reason="dyld",path="/usr/lib/system/libunc.dylib",loaded_addr="0x7fff8ab27000"]
=shlibs-added,shlib-info=[num="82",name="libunwind.dylib",dyld-addr="0x7fff85cf3000",reason="dyld",path="/usr/lib/system/libunwind.dylib",loaded_addr="0x7fff85cf3000"]
=shlibs-added,shlib-info=[num="83",name="libxpc.dylib",dyld-addr="0x7fff88896000",reason="dyld",path="/usr/lib/system/libxpc.dylib",loaded_addr="0x7fff88896000"]
=shlibs-added,shlib-info=[num="84",name="libobjc.A.dylib",dyld-addr="0x7fff84f13000",reason="dyld",path="/usr/lib/libobjc.A.dylib",loaded_addr="0x7fff84f13000"]
=shlibs-added,shlib-info=[num="85",name="libauto.dylib",dyld-addr="0x7fff85d89000",reason="dyld",path="/usr/lib/libauto.dylib",loaded_addr="0x7fff85d89000"]
=shlibs-added,shlib-info=[num="86",name="libDiagnosticMessagesClient.dylib",dyld-addr="0x7fff822e1000",reason="dyld",path="/usr/lib/libDiagnosticMessagesClient.dylib",loaded_addr="0x7fff822e1000"]
(gdb)
*stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x0000000100000f4d",func="main",args=[{name="argc",value="1"},{name="argv",value="0x00007fff5fbffed8"}],file="main.cpp",fullname="/Users/chuckr/llama/llvm/tools/lldb/test/tools/lldb-mi/main.cpp",line="15"},thread-id="1",stopped-threads="all"
(gdb)
```
Reviewers: abidh, clayborg, ChuckR, jingham
Subscribers: ki.stfu, paulmaybee, lldb-commits
Differential Revision: http://reviews.llvm.org/D8847
llvm-svn: 234483
This includes:
* Add CMICmnLLDBUtilSBValue::IsIntegerType to check integer type
* Improve CMICmnLLDBDebugSessionInfoVarObj::GetValueStringFormatted to handle veVarFormat arg
llvm-svn: 234480
Summary:
This patch includes the following changes:
# Refactor GetVariableInfo/GetValueStringFormatted/GetValue to use the same code (MI)
Also it expands the variable value format for strings (aka char*):
was:
```
^done,name="v4",numchild="1",value="0x0000000100000f56",type="const char *",thread-id="1",has_more="0"
```
now:
```
^done,name="v4",numchild="1",value="0x0000000100000f56 \"ab\"",type="const char *",thread-id="1",has_more="0"
```
# Expand the variable value format for arrays (according to GDB)
For example:
was:
```
^done,name="v3",numchild="2",value="{...}",type="char [2]",thread-id="1",has_more="0"
```
now:
```
^done,name="v3",numchild="2",value="[2]",type="char [2]",thread-id="1",has_more="0"
```
# Rename MiGdbSetShowTestCase.test_lldbmi_gdb_show_process_stopatentry_default to test_lldbmi_gdb_show_process_stopatentry (MI)
# Fix a comment in MiGdbSetShowTestCase.test_lldbmi_gdb_show_process_stopatentry (MI)
# Refactor CMICmnLLDBUtilSBValue
## Add CMICmnLLDBUtilSBValue::IsPointerType/IsArrayType
## Refactor CMICmnLLDBUtilSBValue::GetValue
## Fix CMICmnLLDBUtilSBValue::IsChildCharType to ignore a number of childs
## Rename CMICmnLLDBUtilSBValue::IsChildCharType to IsFirstChildCharType
## Fix CMICmnLLDBUtilSBValue::GetValueCString to accept char[]
# Minor changes in CMICmnLLDBUtilSBValue::GetValue
# Refactor CMICmnLLDBDebugSessionInfo::MIResponseFormVariableInfo family functions (MI)
# Refactor CMICmnLLDBDebugSessionInfo::MIResponseFormFrameInfo family functions (MI)
## Remove CMICmnLLDBDebugSessionInfo::MIResponseFormFrameInfo2
## Improve CMICmnLLDBDebugSessionInfo::MIResponseFormFrameInfo to accept args
# Refactor CMICmnLLDBDebugSessionInfo::MIResponseFormFrameInfo family functions (MI)
## Add vArgInfo arg to CMICmnLLDBDebugSessionInfo::MIResponseFormFrameInfo
## Move CMICmnLLDBDebugSessionInfo::GetFrameInfo/MIResponseFormFrameInfo to private namespace
# Refactor CMICmnLLDBDebugSessionInfo::GetThreadFrames family functions (MI)
## Remove CMICmnLLDBDebugSessionInfo::GetThreadFrames2
## Improve CMICmnLLDBDebugSessionInfo::GetThreadFrames to accept vnMaxDepth
# Fix vnMaxDepth arg name in CMICmnLLDBDebugSessionInfo::MIResponseFormVariableInfo (MI)
# Refactor CMICmnLLDBDebugSessionInfo::MIResponseFormFrameInfo family functions (MI)
## Merge CMICmnLLDBDebugSessionInfo::MIResponseFormFrameInfo functions into one
# Don't modify fnName in CMICmnLLDBDebugSessionInfo::GetThreadFrames (MI)
# Refactor CMICmnLLDBDebugSessionInfo::MIResponseFormThreadInfo family functions (MI)
## Remove CMICmnLLDBDebugSessionInfo::MIResponseFormThreadInfo3
## Improve -CMICmnLLDBDebugSessionInfo::MIResponseFormThreadInfo to accept vnMaxDepth
# Refactor CMICmnLLDBDebugSessionInfo::MIResponseFormThreadInfo family functions (MI)
## Remove CMICmnLLDBDebugSessionInfo::MIResponseFormThreadInfo2
## Add CMICmnLLDBDebugSessionInfo::ThreadInfoFormat_e enum to specify thread format
## Improve CMICmnLLDBDebugSessionInfo::MIResponseFormThreadInfo to accept veThreadInfoFormat
## Remove vnMaxDepth arg in CMICmnLLDBDebugSessionInfo::MIResponseFormThreadInfo (not needed because veThreadInfoFormat was added)
# Move CMICmnLLDBDebugSessionInfo::GetThreadFrames to private namespace (MI)
# Refactor CMICmnLLDBDebugSessionInfo::MIResponseFormFrameInfo (MI)
## Add CMICmnLLDBDebugSessionInfo::FrameInfoFormat_e enum to specify frame format
## Improve CMICmnLLDBDebugSessionInfo::MIResponseFormFrameInfo to accept veFrameInfoFormat
## Remove vnMaxDepth arg in CMICmnLLDBDebugSessionInfo::MIResponseFormFrameInfo (not needed because veFrameInfoFormat was added)
# Remove duplicated level field in CMICmnLLDBDebugSessionInfo::GetThreadFrames (MI)
# Refactor CMICmnLLDBUtilSBValue::GetValue (MI)
## Add CMICmnLLDBUtilSBValue::GetSimpleValue
## Use CMICmnLLDBUtilSBValue::GetSimpleValue in GetVlaue
# Fix CMICmnLLDBDebugSessionInfo::GetThreadFrames (MI)
## Add CMICmnLLDBDebugSessionInfo::FrameInfoFormat_e::eFrameInfoFormat_AllArgumentsInSimpleForm which is used to get stack-args in simple form (i.e. show {...} for composite types). It can be done by calling MIResponseFormVariableInfo with vnMaxDepth=0.
## Improve CMICmnLLDBDebugSessionInfo::GetThreadFrames to accept veFrameInfoFormat
## Remove vnMaxDepth from CMICmnLLDBDebugSessionInfo::GetThreadFrames (we should use veFrameInfoFormat instead)
# Refactor CMICmnLLDBUtilSBValue::GetValue to expand composite types (MI)
## Add CMICmnLLDBUtilSBValue::GetCompositeValue to expand composite types
## Add CMICmnLLDBUtilSBValue::m_pComposite to avoid multiple {...} in the code
## Improve CMICmnLLDBUtilSBValue::GetValue to accept vbExpandAggregates option (default=false)
## Clean up CMICmnLLDBDebugSessionInfo::GetVariableInfo to use CMICmnLLDBUtilSBValue::GetValue
## Remove the wrapping into {} in CMICmnLLDBDebugSessionInfo::MIResponseFormVariableInfo
## Fix MiStackTestCase.test_lldbmi_stack_list_locals test to expect result without superfluous space ' ' around the '{' or '}' brackets:
was:
```
{name=\"var_c\",value=\"{var_a = 10,var_b = 97 'a',inner_ = { var_d = 30 }}
```
now:
```
{name=\"var_c\",value=\"{var_a = 10,var_b = 97 'a',inner_ = {var_d = 30}}
```
## Fix vwrValue arg name in CMICmnLLDBUtilSBValue::GetSimpleValue (was vrValue)
# Refactor CMICmnLLDBDebugSessionInfo::GetVariableInfo (MI)
## Remove vnMaxDepth/vbIsChildValue/vnDepth args in CMICmnLLDBDebugSessionInfo::GetVariableInfo
## Improve CMICmnLLDBDebugSessionInfo::GetVariableInfo to accept vwrStrValue
## Remove vwrMiValueList arg in CMICmnLLDBDebugSessionInfo::GetVariableInfo (we should use vwrStrValue instead)
## Fix CMICmnLLDBDebugSessionInfo::MIResponseFormVariableInfo to Escape values
was:
```
{name="p",value="0x0000000000000000 """}
```
now:
```
{name="p",value="0x0000000000000000 \"\""}
```
# Refactor CMICmnLLDBUtilSBValue
## Improve CMICmnLLDBUtilSBValue::GetValue to handle PrintExpandAggregates
## Improve CMICmnLLDBUtilSBValue::GetSimpleValue to handle vbHandleArrayType (use it to specify that array should be represented as simple type, i.e. value="[2]")
# Add spacing between fields in CMICmnLLDBUtilSBValue::GetCompositeValue (MI)
For example:
was:
```
^done,name="var3",numchild="3",value="{i = 3,inner = {l = 3},complex_ptr = 0x00007fff5fbff848}",type="complex_type",thread-id="1",has_more="0"
```
now:
```
^done,name="var3",numchild="3",value="{i = 3, inner = {l = 3}, complex_ptr = 0x00007fff5fbff848}",type="complex_type",thread-id="1",has_more="0"
```
# Fix spacing in MiStackTestCase.test_lldbmi_stack_list_locals test (MI)
Test Plan: ./dotest.py -v --executable $BUILDDIR/bin/lldb tools/lldb-mi/
Reviewers: abidh
Subscribers: lldb-commits, abidh
Differential Revision: http://reviews.llvm.org/D8913
llvm-svn: 234476
In an effort to reduce binary size for components not wishing to
link against all of LLDB, as well as a parallel effort to reduce
link dependencies on Python, this patch splits out the notion of
LLDB initialization into "full" and "common" initialization.
All code related to initializing the full LLDB suite lives directly
in API now. Previously it was only referenced from API, but because
it was defined in lldbCore, it would get implicitly linked against
by everything including lldb-server, causing a considerable
increase in binary size.
By moving this to the API layer, it also creates a better layering
for the ongoing effort to make the embedded interpreter replacable
with one from a different language (or even be completely removeable).
One semantic change necessary to get this all working was to remove
the notion of a shared debugger refcount. The debugger is either
initialized or uninitialized now, and calling Initialize() multiple
times will simply have no effect, while the first Terminate() will
now shut it down no matter how many times Initialize() was called.
This behaves nicely with all of our supported usage patterns though,
and allows us to fix a number of nasty hacks from before.
Differential Revision: http://reviews.llvm.org/D8462
llvm-svn: 233758
A temp object was being created to call StripOffFileName. This function
is not dependent on class members so I am making it static.
No regression on testsuite on Linux.
llvm-svn: 233703
lldb-platform's listener socket only had a backlog of one connection.
That means that if more than one client connected simultaneously, the
connection would be refused. The test suite can be run remotely with
dozens of threads connecting simultaneously. Raised this limit to 100
to effectively eliminate lost connections.
Test Plan:
run tests against a remote target
Differential Revision: http://reviews.llvm.org/D8696
llvm-svn: 233652
lldb-server server process was holding on to a connection to every
client that connected. This continued until the process hit it's
file limit and exited.
lldb-server p --listen *:5432 --server
run remote tests against that server more than 1000 times
Differential Revision: http://reviews.llvm.org/D8697
llvm-svn: 233651
Summary:
This patch fixes -gdb-exit for locally target. It includes the following changes:
# Fix Process::Finalize
# Use SBProcess::Destroy in -gdb-exit
Reviewers: abidh, zturner, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D8298
llvm-svn: 233255
Adds the --server argument to lldb-server platform which when specified will allow multiple simultaneous connections by forking off to handle each individual connection. This will allow us to run the remote tests in parallel.
Test Plan:
Run: lldb-server platform --listen *:1234 --server
Connect from multiple lldb clients simultaneously.
I will also test running the test suite remotely with multiple simultaneous jobs.
Differential Revision: http://reviews.llvm.org/D8452
llvm-svn: 233185
Summary:
This path adds -gdb-show command with 1 option: target-async.
Also it adds tests for -gdb-set and -gdb-show commands.
All tests pass on OS X.
Test Plan: ./dotest.py -v --executable $BUILDDIR/bin/lldb -f MiGdbSetShowTestCase
Reviewers: clayborg, abidh
Reviewed By: clayborg, abidh
Subscribers: lldb-commits, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D8566
llvm-svn: 233114
Summary:
This patch adds support for CLI command in lldb-mi. It's useful ability which also was implemented in gdb.
All tests pass on OS X.
Test Plan: ./dotest.py -v --executable $BUILDDIR/bin/lldb tools/lldb-mi/interpreter/
Reviewers: ted, clayborg, abidh
Reviewed By: clayborg, abidh
Subscribers: jingham, lldb-commits, ted, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D8483
llvm-svn: 233112
After removing the ability of using lldb-mi as 'lldb', a lot of code has become redundant. This commit removes some of that code.
Note: Some files are being removed. The cmake file has been updated. Please update xcode project accordingly.
llvm-svn: 233083
Summary:
Previously lldb-mi contains a stub for that but it didn't work and all CommanInterpreter's events were ignored.
This commit adds a handling of CommandInterpreter's events in lldb-mi.
Steps:
# Fix CMICmnLLDBDebugger::InitSBListener
# Add SBCommandInterpreter::EventIsCommandInterpreterEvent
# Exit on lldb::SBCommandInterpreter::eBroadcastBitQuitCommandReceived
All tests pass on OS X.
In further we can remove "quit" hack in lldb-mi.
Test Plan:
# Create start_script file:
```
target create ~/p/hello
b main
r
quit
```
# Run lldb-mi --interpreter
# Execute start_script file by following command:
```
-interpreter-exec console "command source start_script"
```
Log:
```
$ bin/lldb-mi --interpreter
(gdb)
-interpreter-exec console "command source start_script"
Executing commands in '/Users/IliaK/p/llvm/build_ninja/start_script'.
(lldb) target create ~/p/hello
Current executable set to '~/p/hello' (x86_64).
(lldb) b main
Breakpoint 1: where = hello`main + 29 at hello.cpp:12, address = 0x0000000100000e2d
(lldb) r
Process 1582 launched: '/Users/IliaK/p/hello' (x86_64)
(lldb) quit
^done
(gdb)
=thread-created,id="1",group-id="i1"
=thread-selected,id="1"
(gdb)
=shlibs-added,shlib-info=[num="1",name="hello",dyld-addr="-",reason="dyld",path="/Users/IliaK/p/hello",loaded_addr="-",dsym-objpath="/Users/IliaK/p/hello.dSYM/Contents/Resources/DWARF/hello"]
...
=shlibs-added,shlib-info=[num="132",name="libDiagnosticMessagesClient.dylib",dyld-addr="0x7fff91705000",reason="dyld",path="/usr/lib/libDiagnosticMessagesClient.dylib",loaded_addr="0x7fff91705000"]
(gdb)
*stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x100000e2d",func="main",args=[{name="argc",value="1"},{name="argv",value="0x00007fff5fbffc88"}],file="hello.cpp",fullname="/Users/IliaK/p/hello.cpp",line="12"},thread-id="1",stopped-threads="all"
(gdb)<press Enter>
MI: Program exited OK
```
Reviewers: abidh, clayborg
Reviewed By: abidh
Subscribers: jingham, lldb-commits, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D8382
llvm-svn: 232891
This creates a new top-level folder called Initialization which
is intended to hold code specific to LLDB system initialization.
Currently this holds the Initialize() and Terminate() functions,
as well as the fatal error handler.
This provides a means to break the massive dependency cycle which
is caused by the fact that Debugger depends on Initialize and
Terminate which then depends on the entire LLDB project. With
this structure, it will be possible for applications to invoke
lldb_private::Initialize() directly, and have that invoke
Debugger::Initialize.
llvm-svn: 232768
Summary:
This changes all reporting of addresses from lldb-mi to be 64 bit capable. There could have been cases where a 64 bit address was getting truncated to 32 bit format.
Patch from chuckr@microsoft.com
Reviewers: abidh, ChuckR
Reviewed By: abidh
Subscribers: paulmaybee, ki.stfu, zturner, lldb-commits
Differential Revision: http://reviews.llvm.org/D8238
llvm-svn: 232736
So that we don't have to update every single #include in the entire
codebase to #include this new header (which used to get included by
lldb-private-log.h, we automatically #include "Logging.h" from
within "Log.h".
llvm-svn: 232653
Summary:
Previously lldb-mi can also act as a driver like normal lldb. It needed a lot
of redundant code in the lldb-mi for that. I think that if a user wants command
line lldb driver then he/she should use the lldb for it. This change will cleanup
the code a lot. When this change goes in, it will allow us to remove some more
redundant code too.
All tests pass on Linux. Did some sanity testing on command line and with eclipse.
Reviewers: ki.stfu
Reviewed By: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8381
llvm-svn: 232621
Most of lldb-mi files have comments about environement, copyright etc which were neither needed nor uptodate.
This commit removes those comments.
llvm-svn: 232396
Not checking for this flags caused lldb-mi to issue stop notification when target
has started running again. It also tried to get stack when target was running and
this caused randon failure.
Approved in http://lists.cs.uiuc.edu/pipermail/lldb-dev/2015-March/006953.html
llvm-svn: 232370
This variable "g_debugger_name" is not used anywhere. It also causes a warning.
I was first going to change its type to fix the warning then noticed that it
is not being used. So removing it.
Committed as Obvious.
llvm-svn: 232043
This was previously initialized by ProcessGDBRemote::Initialize but lldb-server does not contain ProcessGDBRemote anymore so this needs to be initialized directly.
Differential Revision: http://reviews.llvm.org/D8186
llvm-svn: 231966
After http://reviews.llvm.org/D8133 landed as r231550 process launch on remote platform stopped working.
This adds Debugger::InitializeForLLGS and tracks whether one or both of Initialize and InitializeForLLGS have been called, calling only the corresponding lldb_private::Terminate* methods as necessary. Since lldb_private::Terminate calls lldb_private::TerminateForLLGS, the latter method may be called twice if Initialize was called for both however the terminate methods ensure they are only called once after being initialized.
This still maintains the reduced binary size, though it does now technically link in lldb_private::Terminate on lldb-server even though this should never be called.
This should resolve the issue raised in http://reviews.llvm.org/D8133 where Debugger::Terminate assumed that there were 0 references to debugger and terminated early.
Differential Revision: http://reviews.llvm.org/D8183
llvm-svn: 231808
Summary:
This patch includes:
* Fix -var-create command for global/static variables
* Fix -var-update command: remove m_strValueName/m_eVarInfoFormat/m_bValueChanged{Array,Composite,Normal}Type; clean CMICmdCmdVarUpdate::Execute and CMICmdCmdVarUpdate::Acknowledge; improve CMICmdCmdVarUpdate::MIFormResponse; Complete the value after -var-create using the CMICmdCmdVarCreate::CompleteSBValue to get SBValue::GetValueDidChange work.
* Add non-constant version of CMICmnLLDBDebugSessionInfoVarObj::GetValue
* Add MiVarTestCase.test_lldbmi_var_update test
All tests pass on OS X.
Reviewers: abidh, emaste, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, emaste, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D8110
llvm-svn: 231525
Previously it was initialized by ProcessLinux but lldb-server don't
contain ProcessLinux anymore so it have to be initialized by
NativeProcessLinux also.
Differential revision: http://reviews.llvm.org/D8080
llvm-svn: 231482
Summary:
LLDB driver was simply tacking quotes around the strings in lldb commands, hoping that will work.
This changes it to properly escape quotes and backslashes.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8083
llvm-svn: 231394
Summary:
# Allow to pass an executable file via lldb-mi arguments
# Add tests
# Fix (gdb) prompt in CMIDriver::LocalDebugSessionStartupExecuteCommands
# Fix prompt in CMIDriver::InterpretCommandThisDriver: use the lldb-mi prompt instead of a hard-coded value.
All tests pass on OS X.
Reviewers: abidh, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D8001
llvm-svn: 231070
Separate out the necessary component initialization for lldb-server such that the linker can greatly reduce the binary size. With this patch the size of lldb-server on my 64 bit linux release build drops from 46MB to 26MB.
Differential Revision: http://reviews.llvm.org/D7880
llvm-svn: 230963
Summary:
* Clean CMICmdArgValString::Validate: now it's based on CMIUtilString::SplitConsiderQuotes method:
A bit of introduction:
# Command line is wrapped into CMICmdArgContext.
# CMICmdArgSet is a set of arguments to be parsed. This class contains CMICmdArgContext as a private member.
# MI command is class which is inhereted from CMICmdBase. It contains CMICmdArgSet as a private member.
When command is executed CMICmdBase::ParseArgs() is called. This method adds args for parsing using CMICmdArgSet::Add(). Then CMICmdBase::ParseValidateCmdOptions() is called, which calls CMICmdArgSet::Validate(). Then it gets a number of arguments (using SplitConsiderQuotes().array_length) and for each arguments registered in ParseArgs() tries to validate it using CMICmdArgValBase::Validate(). Every user commands parses this string again (first time it was made in SplitConsiderQuotes) and in case of CMICmdArgValString it was made incorrectly. It searches the first and last quotes (but it should be first and next after first). Besides, it was splitted into 4 cases.
I'm just using SplitConsiderQuotes directly, and I don't split them by hand again.
Actually, I think we should do so in every CMICmdArgVal_XXX::Validate() method.
* Enable MiInterpreterExecTestCase.test_lldbmi_target_create test
* Fix MiExecTestCase.test_lldbmi_exec_arguments_set test
All tests pass on OS X.
Reviewers: abidh, emaste, zturner, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, zturner, emaste, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D7860
llvm-svn: 230654
Summary:
* Add CMIUtilString::Escape/Unescape methods (MI)
* Fix process's output to stdout/stderr (MI):
lldb-mi escapes process's output to show it in the following format:
```
~"..."
```
But previously not all characters were escaped by CMICmnLLDBDebuggerHandleEvents::ConvertPrintfCtrlCodeToString and output of
```
printf("'\n` - it's \\n\x12\"\\\"")
```
looked like:
```
~"'\r\n` - it's \n"\""
```
This patch fixes it by using CMIUtilString::Escape method and now it looks like:
```
~"'\r\n` - it's \\n\x12\"\\\""
```
Reviewers: abidh, emaste, clayborg
Reviewed By: clayborg
Subscribers: zturner, lldb-commits, emaste, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D7858
llvm-svn: 230652
Summary:
Improve CMICmdArgValFile::IsValidChars to accept extra characters that can be in file name:
```
.'\"`@#$%^&*()_+-={}[]|
```
Enable MiSyntaxTestCase.test_lldbmi_specialchars test.
All test pass on OS X.
Reviewers: abidh, emaste, zturner, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, zturner, emaste, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D7859
llvm-svn: 230468
This resubmits r230380. The primary cause of the failure was
actually just a warning, which we can disable at the CMake level
in a followup patch on the LLVM side. The other thing which was
actually an error on the bot should be able to be fixed with
a clean.
llvm-svn: 230389
An OBJECT library is a special type of CMake library that produces
no archive, has no link interface, and no link inputs. It is like
a regular archive, just without the physical output. To link
against an OBJECT library, you reference it in the *source* file
list of a library using the special syntax $<TARGET_OBJECTS:lldbAPI>.
This will cause every object file to be passed to the linker
independently, as opposed to a single archive being passed to the
linker.
This is *extremely* important on Windows. lldbAPI exports all of the
SB classes using __declspec(dllexport). Unfortunately for technical
reasons it is not possible (well, extremely difficult) to get the
linker to propagate a __declspec(dllexport) attribute from a symbol
in an object file in an archive to a DLL that links against that
archive. The solution to this is for the DLL to link the object files
directly. So lldbAPI must be an OBJECT library.
This fixes an issue that has been present since the duplicated
lldbAPI file lists were removed, which would cause linker failures.
As a side effect, this also makes LLDB_DISABLE_PYTHON=1 work again
on Windows, which was previously totally broken.
llvm-svn: 230380
Summary:
After recent changes, some code has become redundant. This revision tries to remove
the un-used code and tidy up the rest.
Following 4 files have been removed. I have updated CMake files and checked that it builds
fine on Linux and Windows. Can somebody update the xcode related file accordingly?
tools/lldb-mi/MICmnStreamStdinLinux.cpp
tools/lldb-mi/MICmnStreamStdinLinux.h
tools/lldb-mi/MICmnStreamStdinWindows.cpp
tools/lldb-mi/MICmnStreamStdinWindows.h
Reviewers: clayborg, ki.stfu
Reviewed By: clayborg, ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7834
llvm-svn: 230345
Summary:
Add -exec-abort command + test.
Also, I had fixed an error, when lldb-mi exits on eStateExited. With current patch we can re-run target:
```
-file-exec-and-symbols hello
^done
-exec-run
^running
*stopped,reason="breakpoint-hit"...
-exec-abort
^done
*stopped,reason="exited-normally"... <- program exits
-exec-run <- run again
^running
*stopped,reason="breakpoint-hit"...
```
All tests pass on OS X.
Reviewers: zturner, emaste, abidh, clayborg
Reviewed By: abidh, clayborg
Subscribers: lldb-commits, emaste, zturner, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D7794
llvm-svn: 230321
Summary:
This revision fixes a problem where lldb-mi would not stop the execution after exec-interrupt call.
On Linux, SIGSTOP is used to stop the debuggee process. LLDB stopped the debuggee alright. But when
lldb-mi received the notification of stopping with reason as SIGSTOP, it would resume the process.
This was heppening in CMICmnLLDBDebuggerHandleEvents::HandleProcessEventStopSignal. This function aslo
used hard coded numbers for signal istead of symbolic names.
This revision changes code to treat SIGSTOP reason as SIGINT. Also used symbolic names for signals
instead of numbers.
Reviewers: ki.stfu, clayborg
Reviewed By: ki.stfu, clayborg
Subscribers: zturner, lldb-commits
Differential Revision: http://reviews.llvm.org/D7783
llvm-svn: 230237
LLDB-mi have 3 threads.
1. Wait for input.
2. Process commands.
3. Process events.
This revision merges 1 & 2. Same thread waits on input and then process the
command. This way, no synchronization is needed between first and 2nd. Also it is
easy to check when to exit.
A lot of code will redundant and will be cleaned up gradually.
All lldb-mi tests pass with gcc and clang as test compiler. Also did minimal testing
on command line and works ok. The "quit" and "-gdb-exit" command close the application
without needing any further return.
Reviewed in http://reviews.llvm.org/D7746.
llvm-svn: 230003
This commit merges lldb-platform and lldb-gdbserver into a single binary
of the same size as each of the previous individual binaries. Execution
mode is controlled by the first argument being either platform or
gdbserver.
Patch from: flackr <flackr@google.com>
Differential revision: http://reviews.llvm.org/D7545
llvm-svn: 229683
Platform.h was causing soem warning due to multiple defined maros.
It already has a define that excludes the singal.h but that was not being
used at correct place. It has been fixed now.
Tested by building on Windows(MSVC) and Linux(gcc).
llvm-svn: 229664
Previos version of this patch (see r229148) contained two errors:
* make_symlink_darwin_debug passes 2 arguments into make_symlink, but it required 4 arguments (was fixed by r229159)
* make_symlink doesn't work on OS X
As a quick fix, the r229148 and the r229159 were reverted. Now these errors are fixed.
Summary:
This patch fixes the following tests on OS X:
```
FAIL: test_with_dsym (TestLaunchWithGlob.LaunchWithGlobTestCase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/Users/testuser/build/workspace/LLDB_master_release_OSX/llvm_master/tools/lldb/test/lldbtest.py", line 456, in wrapper
return func(self, *args, **kwargs)
File "/Users/testuser/build/workspace/LLDB_master_release_OSX/llvm_master/tools/lldb/test/functionalities/launch_with_glob/TestLaunchWithGlob.py", line 21, in test_with_dsym
self.do_test ()
File "/Users/testuser/build/workspace/LLDB_master_release_OSX/llvm_master/tools/lldb/test/functionalities/launch_with_glob/TestLaunchWithGlob.py", line 42, in do_test
self.runCmd("process launch -G true -w %s -- fi*.tx?" % (os.getcwd()))
File "/Users/testuser/build/workspace/LLDB_master_release_OSX/llvm_master/tools/lldb/test/lldbtest.py", line 1953, in runCmd
msg if msg else CMD_MSG(cmd))
AssertionError: False is not True : Command 'process launch -G true -w /Users/testuser/build/workspace/LLDB_master_release_OSX/llvm_master/tools/lldb/test/functionalities/launch_with_glob -- fi*.tx?' returns successfully
Config=x86_64-clang
======================================================================
FAIL: test_with_dwarf (TestLaunchWithGlob.LaunchWithGlobTestCase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/Users/testuser/build/workspace/LLDB_master_release_OSX/llvm_master/tools/lldb/test/lldbtest.py", line 473, in wrapper
return func(self, *args, **kwargs)
File "/Users/testuser/build/workspace/LLDB_master_release_OSX/llvm_master/tools/lldb/test/functionalities/launch_with_glob/TestLaunchWithGlob.py", line 28, in test_with_dwarf
self.do_test ()
File "/Users/testuser/build/workspace/LLDB_master_release_OSX/llvm_master/tools/lldb/test/functionalities/launch_with_glob/TestLaunchWithGlob.py", line 42, in do_test
self.runCmd("process launch -G true -w %s -- fi*.tx?" % (os.getcwd()))
File "/Users/testuser/build/workspace/LLDB_master_release_OSX/llvm_master/tools/lldb/test/lldbtest.py", line 1953, in runCmd
msg if msg else CMD_MSG(cmd))
AssertionError: False is not True : Command 'process launch -G true -w /Users/testuser/build/workspace/LLDB_master_release_OSX/llvm_master/tools/lldb/test/functionalities/launch_with_glob -- fi*.tx?' returns successfully
```
Reviewers: epertoso, emaste, abidh, clayborg, zturner
Reviewed By: clayborg
Subscribers: abidh, lldb-commits, emaste, epertoso, zturner, clayborg
Differential Revision: http://reviews.llvm.org/D7550
llvm-svn: 229517
Summary:
* Add IsHexadecimalNumber method to CMIUtilString (MI)
* Add number format (dec,hex,auto) to CMICmdArgValNumber (MI)
* Fix -data-read-memory-bytes to pass address in hex format (MI)
* Fix output begin/end/offset fields format in -data-read-memory-bytes
* Fix CMICmdArgValNumber::ExtractNumber to extract 64bit value
* + tests
All tests passed on OS X
Reviewers: abidh, zturner, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, zturner, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D7610
llvm-svn: 229132
It fixes the following example:
```
$ bin/lldb-mi --interpreter
(gdb)
-not-found
^error,msg="Driver. Received command '-not-found'. It was not handled. Command 'not-found' not in Command Factory"
-not-found
^error,msg="Driver. Received command '-not-found'. It was not handled. Command 'not-found' not in Command Factory"
```
After the fix it looks like:
```
$ bin/lldb-mi --interpreter
-not-found
^error,msg="Driver. Received command '-not-found'. It was not handled. Command 'not-found' not in Command Factory"
(gdb)
-not-dounf
^error,msg="Driver. Received command '-not-dounf'. It was not handled. Command 'not-dounf' not in Command Factory"
(gdb)
```
llvm-svn: 229131
Summary:
This patch adds -exec-arguments command for lldb-mi. -exec-arguments command allows to specify arguments for executable file in MI mode. Also it contains tests for that command.
Btw, new added files was formatted by clang-format.
Reviewers: abidh, zturner, clayborg
Reviewed By: clayborg
Subscribers: zturner, emaste, clayborg, jingham, lldb-commits
Differential Revision: http://reviews.llvm.org/D6965
llvm-svn: 229110
Greg Clayton