Summary:
This fixes two related bugs. First, the generic optimization passes
unfortunately generate negative constant offsets but the hardware treats
SOffset as an unsigned value.
Second, there is a hardware bug on SI and CI, where address clamping in MUBUF
instructions does not work correctly when SOffset is larger than the buffer
size. This patch works around this bug by never using SOffset.
An alternative workaround would be to do the clamping manually when SOffset
is too large, but generating the required code sequence during instruction
selection would be rather involved, and in any case the resulting code would
probably be worse.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96360
Reviewers: arsenm, tstellarAMD
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D21326
llvm-svn: 272761
Summary:
... when the offset is not statically known.
Prioritize addresses relative to the stack pointer in the stackmap, but
fallback gracefully to other modes of addressing if the offset to the
stack pointer is not a known constant.
Patch by Oscar Blumberg!
Reviewers: sanjoy
Subscribers: llvm-commits, majnemer, rnk, sanjoy, thanm
Differential Revision: http://reviews.llvm.org/D21259
llvm-svn: 272756
Summary:
We we have an MCConstantExpr, we can encode it directly into the instruction
instead of emitting fixups.
Reviewers: artem.tamazov, vpykhtin, SamWot, nhaustov, arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D21236
Change-Id: I88b3edf288d48e65c5d705fc4850d281f8e36948
llvm-svn: 272750
Summary:
We can now reference symbols directly in operands, like this:
s_mov_b32 s0, global
Reviewers: artem.tamazov, vpykhtin, SamWot, nhaustov
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D21038
llvm-svn: 272748
r272715 broke libcxx because it did not correctly handle cases where the
last iteration of one IV is the second-to-last iteration of another.
Original commit message:
Vectorizing loops with "escaping" IVs has been disabled since r190790, due to
PR17179. This re-enables it, with support for external use of both
"post-increment" (last iteration) and "pre-increment" (second-to-last iteration)
IVs.
llvm-svn: 272742
We do not support splitting cleanuppad or catchswitches. This is
problematic for passes which assume that a loop is in loop simplify
form (the loop would have a dedicated exit block instead of sharing it).
While it isn't great that we don't support this for cleanups, we still
cannot make loop-simplify form an assertable precondition because
indirectbr will also disable these sorts of CFG cleanups.
This fixes PR28132.
llvm-svn: 272739
Nearly all the changes to this pass have been done while maintaining and
updating other parts of LLVM. LLVM has had another pass, SROA, which
has superseded ScalarReplAggregates for quite some time.
Differential Revision: http://reviews.llvm.org/D21316
llvm-svn: 272737
Summary: With runtime profile, we have more confidence in branch probability, thus during basic block layout, we set a lower hot prob threshold so that blocks can be layouted optimally.
Reviewers: djasper, davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20991
llvm-svn: 272729
Vectorizing loops with "escaping" IVs has been disabled since r190790, due to
PR17179. This re-enables it, with support for external use of both
"post-increment" (last iteration) and "pre-increment" (second-to-last iteration)
IVs.
Differential Revision: http://reviews.llvm.org/D21048
llvm-svn: 272715
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
llvm-svn: 272709
This change teaches llvm::isGuaranteedToTransferExecutionToSuccessor
that calls to @llvm.assume always terminate. Most other relevant
intrinsics should be covered by the "CS.onlyReadsMemory() ||
CS.onlyAccessesArgMemory()" bit but we were missing @llvm.assumes
because we state that it clobbers memory.
Added an LICM test case, but this change is not specific to LICM.
llvm-svn: 272703
For <N x i32> type mul, pmuludq will be used for targets without SSE41, which
often introduces many extra pack and unpack instructions in vectorized loop
body because pmuludq generates <N/2 x i64> type value. However when the operands
of <N x i32> mul are extended from smaller size values like i8 and i16, the type
of mul may be shrunk to use pmullw + pmulhw/pmulhuw instead of pmuludq, which
generates better code. For targets with SSE41, pmulld is supported so no
shrinking is needed.
Differential Revision: http://reviews.llvm.org/D20931
llvm-svn: 272694
This reverts commit 879139e1c6577b09df52de56a6bab856a19ed185.
This was committed accidentally when I blindly typed git svn
dcommit instead of the command to generate a patch.
llvm-svn: 272693
This patch also includes some refactoring.
Prior to this patch, we tagged all CFLAA attributes as unknown. This is
suboptimal, since it meant that any Value used as an argument would be
considered to alias any other Value that existed.
Now that we have the machinery to tag sets below the set for an
arbitrary value with attributes, it's okay to be less conservative with
arguments. (Specifically, we still tag the set under an argument with
unknown).
Patch by Jia Chen.
Differential Revision: http://reviews.llvm.org/D21262
llvm-svn: 272690
Change EmitGlobalVariable to check final assembler section is in BSS
before using .lcomm/.comm directive. This prevents globals from being
put into .bss erroneously when -data-sections is used.
This fixes PR26570.
Reviewers: echristo, rafael
Subscribers: llvm-commits, mehdi_amini
Differential Revision: http://reviews.llvm.org/D21146
llvm-svn: 272674
The feature allows for conditional assembly etc.
TODO: make those symbols read-only.
Test added.
Differential Revision: http://reviews.llvm.org/D21238
llvm-svn: 272673
Summary:
This new alias takes a comma separated list of prefixes which allows
'--check-prefix=A --check-prefix=B --check-prefix=C' to be written as
'--check-prefixes=A,B,C'.
Reviewers: probinson
Subscribers: probinson, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D21293
llvm-svn: 272670
Instead of always using addu to adjust the stack pointer when the
size out is of the range of an addiu instruction, use subu so that
a smaller constant can be generated.
This can give savings of ~3 instructions whenever a function has a
a stack frame whose size is out of range of an addiu instruction.
This change may break some naive stack unwinders.
Partially resolves PR/26291.
Thanks to David Chisnall for reporting the issue.
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D21321
llvm-svn: 272666
We can only generate immediates up to #510 with a MOV+ADD, not #511, because there's no such instruction as add #256.
Found by Oliver Stannard and csmith!
llvm-svn: 272665
PR27458 highlights that the MIPS backend does not have well formed
MIR for atomic operations (among other errors).
This patch adds expands and corrects the LL/SC descriptions and uses
for MIPS(64).
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D19719
llvm-svn: 272655
This patch implements the N32 case where -mno-shared is in effect. The case
where -mshared is in effect will be added later since doing that now requires
additional changes to how we handle %hi(%neg(%gp_rel(foo))) expressions to
emit the three relocations as three relocations (currently only one of the
three would be emitted) which then requires further changes to our MCFixup
handling.
While we could fix both cases together, fixing the -mno-shared case allows us
to fix the ELFCLASS bug (where N32 incorrectly uses ELFCLASS64 instead of
ELFCLASS32) in a way that allows cpsetup.s to check for a correct output instead
of another incorrect output.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D21131
llvm-svn: 272652
We only used to add the edge from the cloned loop to PHIs that
corresponded to values defined by the loop. We need to do this for all
PHIs obviously since we need a PHI operand for each incoming edge.
This includes things like PHIs with a constant value or with values
defined before the original loop (see the testcases).
After the patch the PHIs are added to the exit block in two passes.
In the first pass we ensure there is a single-operand (LCSSA) PHI for
each value defined by the loop.
In the second pass we loop through each (single-operand) PHI and add the
value for the edge from the cloned loop. If the value is defined in the
loop we'll use the cloned instruction from the cloned loop.
Fixes PR28037
llvm-svn: 272649
Itineraries for some pre MIPSR6 and EVA instructions. Some pseudo expanded
instructions are marked as having no scheduling info.
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D20418
llvm-svn: 272648
Summary:
The machine verifier reports 'Explicit operand marked as def' when it is
manually specified even though it agrees with the operand info.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21065
llvm-svn: 272646
The exit-on-error flag in the ARM test is necessary in order to avoid an
unreachable in the DAGTypeLegalizer, when trying to expand a physical register.
We can also avoid this situation by introducing a bitcast early on, where the
invalid scalar-to-vector conversion is detected.
We also add a test for PowerPC, which goes through a similar code path in the
SelectionDAGBuilder.
Fixes PR27765.
Differential Revision: http://reviews.llvm.org/D21061
llvm-svn: 272644
The need for all these Lookup* functions is just because of calls to
getAnalysis inside methods (i.e. not at the top level) of the
runOnFunction method. They should be straightforward to clean up when
the old PM is gone.
llvm-svn: 272615
This reverts commit r272603 and adds a fix.
Big thanks to Davide for pointing me at r216244 which gives some insight
into how to fix this VS2013 issue. VS2013 can't synthesize a move
constructor. So the fix here is to add one explicitly to the
JumpThreadingPass class.
llvm-svn: 272607
Igor Breger