foldMaskedShiftToScaledMask tries to reorder and & shl to enable the shl to fold into an LEA. But if there is an any_extend between them it doesn't work.
This patch modifies the code to look through any_extend from i32 to i64 when the and mask only uses bits that weren't from the extended part.
This will prevent a regression from D60358 caused by 64-bit SHL being narrowed to 32-bits when their upper bits aren't demanded.
Differential Revision: https://reviews.llvm.org/D60532
llvm-svn: 358139
If we have an (add X, (and (aext (shl Y, C1)), C2)), we can pull the shift through and+aext to fold into an LEA with the.
Assuming C1 is small enough and C2 masks off all of the extend bits.
This pattern showed up in D60358. And we need to handle it to prevent a regression.
llvm-svn: 358124
This adds a simple extra test for constant hoisting to show it's
usefulness with constant addresses like those seen in memory
mapped registers in embedded systems.
llvm-svn: 358114
Certain optimisations from ConstantHoisting and CGP rely on Selection DAG not
seeing through to the constant in other blocks. Revert this patch while we come
up with a better way to handle that.
I will try to follow this up with some better tests.
llvm-svn: 358113
This patch teach getTestBitOperand to look through ANY_EXTENDs when the extended bits aren't used. The test case changed here is based what D60358 did to test16 in tbz-tbnz.ll. So this patch will avoid that regression.
Differential Revision: https://reviews.llvm.org/D60482
llvm-svn: 358108
Summary: The fp16 scalar version of facge and facgt requires a custom patter matching, as the result type is not the same width of the operands.
Reviewers: olista01, javed.absar, pbarrio
Reviewed By: javed.absar
Subscribers: kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60212
llvm-svn: 358083
Make it possible to TableGen code for FCONSTS and FCONSTD.
We need to make two changes to the TableGen descriptions of vfp_f32imm
and vfp_f64imm respectively:
* add GISelPredicateCode to check that the immediate fits in 8 bits;
* extract the SDNodeXForms into separate definitions and create a
GISDNodeXFormEquiv and a custom renderer function for each of them.
There's a lot of boilerplate to get the actual value of the immediate,
but it basically just boils down to calling ARM_AM::getFP32Imm or
ARM_AM::getFP64Imm.
llvm-svn: 358063
Summary:
Obviously, new built MI (sethi+add or sethi+xor+add) for constructing large offset
should be inserted before new created MI for storing even register into memory.
So the insertion position should be *StMI instead of II.
before fixed:
std %f0, [%g1+80]
sethi 4, %g1 <<<
add %g1, %sp, %g1 <<< this two instructions should be put before "std %f0, [%g1+80]".
sethi 4, %g1
add %g1, %sp, %g1
std %f2, [%g1+88]
after fixed:
sethi 4, %g1
add %g1, %sp, %g1
std %f0, [%g1+80]
sethi 4, %g1
add %g1, %sp, %g1
std %f2, [%g1+88]
Reviewers: venkatra, jyknight
Reviewed By: jyknight
Subscribers: jyknight, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60397
llvm-svn: 358042
The selection for G_ICMP is unfortunately not currently importable from SDAG
due to the use of custom SDNodes. To support this, this selection method has an
opcode table which has been generated by a script, indexed by various
instruction properties. Ideally in future we will have a GISel native selection
patterns that we can write in tablegen to improve on this.
For selection of some types we also need support for G_ASHR and G_SHL which are
generated as a result of legalization. This patch also adds support for them,
generating the same code as SelectionDAG currently does.
Differential Revision: https://reviews.llvm.org/D60436
llvm-svn: 358035
required to be passed as different register types. E.g. <2 x i16> may need to
be passed as a larger <2 x i32> type, so formal arg lowering needs to be able
truncate it back. Likewise, when dealing with returns of these types, they need
to be widened in the appropriate way back.
Differential Revision: https://reviews.llvm.org/D60425
llvm-svn: 358032
This lines up with what we do for regular subtract and it matches up better with X86 assumptions in isel patterns that add with immediate is more canonical than sub with immediate.
Differential Revision: https://reviews.llvm.org/D60020
llvm-svn: 358027
One of out of tree targets has regressed with this patch. Reverting
it for now and let liveness to be fully reconstructed in case pass
was used after the LIS is created to resolve the regression.
Differential Revision: https://reviews.llvm.org/D60466
llvm-svn: 358015
When bitcasting from a source op to a larger bitwidth op, split the demanded bits and OR them on top of one another and demand those merged bits in the SimplifyDemandedBits call on the source op.
llvm-svn: 357992
I was looking at a potential DAGCombiner fix for 1 of the regressions in D60278, and it caused severe regression test pain because x86 TLI lies about the desirability of 8-bit shift ops.
We've hinted at making all 8-bit ops undesirable for the reason in the code comment:
// TODO: Almost no 8-bit ops are desirable because they have no actual
// size/speed advantages vs. 32-bit ops, but they do have a major
// potential disadvantage by causing partial register stalls.
...but that leads to massive diffs and exposes all kinds of optimization holes itself.
Differential Revision: https://reviews.llvm.org/D60286
llvm-svn: 357912
Summary:
Previously we would use MOVZXrm8/MOVZXrm16, but those are longer encodings.
This is similar to what we do in the loadi32 predicate.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60341
llvm-svn: 357875
Add support for min/max flavor selects in computeConstantRange(),
which allows us to fold comparisons of a min/max against a constant
in InstSimplify. This fixes an infinite InstCombine loop, with the
test case taken from D59378.
Relative to the previous iteration, this contains some adjustments for
AMDGPU med3 tests: The AMDGPU target runs InstSimplify prior to codegen,
which ends up constant folding some existing med3 tests after this
change. To preserve these tests a hidden -amdgpu-scalar-ir-passes option
is added, which allows disabling scalar IR passes (that use InstSimplify)
for testing purposes.
Differential Revision: https://reviews.llvm.org/D59506
llvm-svn: 357870
In the case where we only want the sign bit (e.g. when using PACKSS truncation of comparison results for MOVMSK) then we can just demand the sign bit of the source operands.
This makes use of the fact that PACKSS saturates out of range values to the min/max int values - so the sign bit is always preserved.
Differential Revision: https://reviews.llvm.org/D60333
llvm-svn: 357859
This function reorders AND and SHL to enable the SHL to fold into an LEA. The
upper bits of the AND will be shifted out by the SHL so it doesn't matter what
mask value we use for these bits. By using sign bits from the original mask in
these upper bits we might enable a shorter immediate encoding to be used.
llvm-svn: 357846
When we shift the AND mask over we should shift in sign bits instead of zero bits. The scale in the LEA will shift these bits out so it doesn't matter whether we mask the bits off or not. Using sign bits will potentially allow a sign extended immediate to be used.
Also add some other test cases for cases that are currently optimal.
llvm-svn: 357845
The expansion of TCRETURNri(64) would not keep operand flags like
undef/renamable/etc. which can result in machine verifier issues.
Also add plumbing to be able to use `-run-pass=x86-pseudo`.
llvm-svn: 357808
Detect dead lanes can create some dead defs. Then RenameIndependentSubregs
will break a REG_SEQUENCE which may use these dead defs. At this point
a dead instruction can be removed but we do not run a DCE anymore.
MachineDCE was only running before live variable analysis. The patch
adds a mean to preserve LiveIntervals and SlotIndexes in case it works
past this.
Differential Revision: https://reviews.llvm.org/D59626
llvm-svn: 357805
Summary:
This avoids needing an isel pattern for each condition code. And it removes translation switches for converting between Jcc instructions and condition codes.
Now the printer, encoder and disassembler take care of converting the immediate. We use InstAliases to handle the assembly matching. But we print using the asm string in the instruction definition. The instruction itself is marked IsCodeGenOnly=1 to hide it from the assembly parser.
Reviewers: spatel, lebedev.ri, courbet, gchatelet, RKSimon
Reviewed By: RKSimon
Subscribers: MatzeB, qcolombet, eraman, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60228
llvm-svn: 357802
Summary:
This avoids needing an isel pattern for each condition code. And it removes translation switches for converting between SETcc instructions and condition codes.
Now the printer, encoder and disassembler take care of converting the immediate. We use InstAliases to handle the assembly matching. But we print using the asm string in the instruction definition. The instruction itself is marked IsCodeGenOnly=1 to hide it from the assembly parser.
Reviewers: andreadb, courbet, RKSimon, spatel, lebedev.ri
Reviewed By: andreadb
Subscribers: hiraditya, lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60138
llvm-svn: 357801
Summary:
Reorder the condition code enum to match their encodings. Move it to MC layer so it can be used by the scheduler models.
This avoids needing an isel pattern for each condition code. And it removes
translation switches for converting between CMOV instructions and condition
codes.
Now the printer, encoder and disassembler take care of converting the immediate.
We use InstAliases to handle the assembly matching. But we print using the
asm string in the instruction definition. The instruction itself is marked
IsCodeGenOnly=1 to hide it from the assembly parser.
This does complicate the scheduler models a little since we can't assign the
A and BE instructions to a separate class now.
I plan to make similar changes for SETcc and Jcc.
Reviewers: RKSimon, spatel, lebedev.ri, andreadb, courbet
Reviewed By: RKSimon
Subscribers: gchatelet, hiraditya, kristina, lebedev.ri, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60041
llvm-svn: 357800
Second half of PR40800, this patch adds DAG undef handling to fcmp instructions to match the behavior in llvm::ConstantFoldCompareInstruction, this permits constant folding of vector comparisons where some elements had been reduced to UNDEF (by SimplifyDemandedVectorElts etc.).
This involves a lot of tweaking to reduced tests as bugpoint loves to reduce fcmp arguments to undef........
Differential Revision: https://reviews.llvm.org/D60006
llvm-svn: 357765
There are a variety of vector patterns that may be profitably reduced to a
scalar op when scalar ops are performed using a subset (typically, the
first lane) of the vector register file.
For x86, this is true for float/double ops and element 0 because
insert/extract is just a sub-register rename.
Other targets should likely enable the hook in a similar way.
Differential Revision: https://reviews.llvm.org/D60150
llvm-svn: 357760
Recent change rL357393 uses MachineInstrBuilder::addDisp to add a based on a
BlockAddress but this case was not implemented.
This patch adds the missing case and a test for RISC-V that exercises the new
case.
Differential Revision: https://reviews.llvm.org/D60136
llvm-svn: 357752
Summary:
Teach SelectionDAG how to compute known bits of ISD::CopyFromReg if
the virtual reg used has one def only.
This can be particularly useful when calling isBaseWithConstantOffset()
with the ISD::CopyFromReg argument, as more optimizations may get enabled
in the result.
Also add a missing truncation on X86, found by testing of this patch.
Change-Id: Id1c9fceec862d118c54a5b53adf72ada5d6daefa
Reviewers: bogner, craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: lebedev.ri, nemanjai, jvesely, nhaehnle, javed.absar, jsji, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59535
llvm-svn: 357745
We already promote SRL and SHL to i32.
This will introduce sign extends sometimes which might be harder to deal with than the zero we use for promoting SRL. I ran this through some of our internal benchmark lists and didn't see any major regressions.
I think there might be some DAG combine improvement opportunities in the test changes here.
Differential Revision: https://reviews.llvm.org/D60278
llvm-svn: 357743
Lowering safepoint checks that all gc.relocaes observed in safepoint
must be lowered. However Fast-Isel is able to skip dead gc.relocate.
To resolve this issue we just ignore dead gc.relocate in the check.
Reviewers: reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D60184
llvm-svn: 357742
It unnecessarily breaks previously-working code which used varargs,
but didn't pass any float/double arguments (such as EDK2).
Also revert the fixup on top of that:
Revert [X86] Fix a test from r357317
This reverts r357317 (git commit d413f41de6)
This reverts r357380 (git commit 7af32444b9)
llvm-svn: 357718
This function is responsible for checking the legality of fusing an instance
of load -> op -> store into a single operation. In the SystemZ backend the
check was incomplete and a test case emerged with a cycle in the instruction
selection DAG as a result.
Instead of using the NodeIds to determine node relationships,
hasPredecessorHelper() now is used just like in the X86 backend. This handled
the failing tests and as well gave a few additional transformations on
benchmarks.
The SystemZ isFusableLoadOpStorePattern() is now a very near copy of the X86
function, and it seems this could be made a utility function in common code
instead.
Review: Ulrich Weigand
https://reviews.llvm.org/D60255
llvm-svn: 357688
SUBREG_TO_REG is supposed to be used to assert that we know the upper bits are
zero. But that isn't the case here. We've done no analysis of the inputs.
llvm-svn: 357673
The Fast ISel has a fallback to SelectionDAGISel in case it cannot handle the instruction.
This works as follows:
Using reverse order, try to select instruction using Fast ISel, if it cannot handle instruction it fallbacks to SelectionDAGISel
for these instructions if it is a call and continue fast instruction selections.
However if unhandled instruction is not a call or statepoint related instruction it fallbacks to SelectionDAGISel for all remaining
instructions in basic block.
However gc.result instruction is missed and as a result it is possible that gc.result is processed earlier than statepoint
causing breakage invariant the gc.results should be handled after statepoint.
Test is updated because in the current form fast-isel cannot handle ret instruction (due to i1 ret type without explicit ext)
and as a result test does not check fast-isel at all.
Reviewers: reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D60182
llvm-svn: 357672
This revision causes tests to fail under ASAN. Since the cause of the failures
is not clear (could be ASAN, could be a Clang bug, could be a bug in this
revision), the safest course of action seems to be to revert while investigating.
llvm-svn: 357667
These inserters inserted some instructions to zero some registers and copied from virtual registers to physical registers.
This change instead inserts the zeros directly into the DAG at lowering time using new ISD opcodes
that take the extra zeroes as inputs. The zeros will then go through isel on their own to select
the MOV32r0 pseudo. Then we just need to mention the physical registers directly
in the isel patterns and the isel table and InstrEmitter will take care of inserting the necessary
copies to/from physical registers.
llvm-svn: 357659
This custom inserter existed so we could do a weird thing where we pretended that the instructions support
a full address mode instead of taking a pointer in EAX/RAX. I think was largely so we could be pointer
size agnostic in the isel pattern.
To make this work we would then put the address into an LEA into EAX/RAX in front of the instruction after
isel. But the LEA is overkill when we just have a base pointer. So we end up using the LEA as a slower MOV
instruction.
With this change we now just do custom selection during isel instead and just assign the incoming address
of the intrinsic into EAX/RAX based on its size. After the intrinsic is selected, we can let isel take
care of selecting an LEA or other operation to do any address computation needed in this basic block.
I've also split the instruction into a 32-bit mode version and a 64-bit mode version so the implicit
use is properly sized based on the pointer. Without this we get comments in the assembly output about
killing eax and defing rax or vice versa depending on whether we define the instruction to use EAX/RAX.
llvm-svn: 357652
This pattern would show up as a regression if we more
aggressively convert vector FP ops to scalar ops.
There's still a missed optimization for the v4f64 legal
case (AVX) because we create that h-op with an undef operand.
We should probably just duplicate the operands for that
pattern to avoid trouble.
llvm-svn: 357642
Relying on no spill or other code being inserted before this was
precarious. It relied on code diligently checking isBasicBlockPrologue
which is likely to be forgotten.
Ideally this could be done earlier, but this doesn't work because of
phis. Any other instruction can't be placed before them, so we have to
accept the position being incorrect during SSA.
This avoids regressions in the fast register allocator rewrite from
inverting the direction.
llvm-svn: 357634
Same as G_EXP. Add a test, and update legalizer-info-validation.mir and
f16-instructions.ll.
Differential Revision: https://reviews.llvm.org/D60165
llvm-svn: 357605
When performing an add-with-overflow with an immediate in the
range -2G ... -4G, code currently loads the immediate into a
register, which generally takes two instructions.
In this particular case, it is preferable to load the negated
immediate into a register instead, which always only requires
one instruction, and then perform a subtract.
llvm-svn: 357597
There are 3 changes to make this correspond to the same transform in instcombine:
1. Remove the legality check - we can't create anything less legal than we started with.
2. Ease the use restriction, so we only bail out if both operands have >1 use.
3. Ease the use restriction for binops with a repeated operand (eg, mul x, x).
As discussed in D60150, there's a scalarization opportunity that will be made
easier by allowing this transform more generally.
llvm-svn: 357580
Summary:
Given that X86 does not use this currently, this is an NFC. I'll
experiment with enabling and will report numbers.
Reviewers: andreadb, lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60185
llvm-svn: 357568
The test should really be checking for the property directly in the
code object headers, but there are problems with this. I don't see
this directly represented in the text form, and for the binary
emission this is depending on a function level subtarget feature to
emit a global flag.
llvm-svn: 357558
In fact we don't even need a loop at all. I backed out the bug fix this was testing for and verified that this new case hit the same issue.
This should stop D59626 from deleting some of this code by realizing it was dead due to the loop.
llvm-svn: 357544
This adds partial instruction selection support for llvm.aarch64.stlxr. It also
factors out selection for G_INTRINSIC_W_SIDE_EFFECTS into its own function. The
new function removes the restriction that the intrinsic ID on the
G_INTRINSIC_W_SIDE_EFFECTS be on operand 0.
Also add a test, and add a GISel line to arm64-ldxr-stxr.ll.
Differential Revision: https://reviews.llvm.org/D60100
llvm-svn: 357518
Craig Topper