A ConversionOperatorIdentifierNode has a TargetType which is read when
printing it, but if the ConversionOperatorIdentifierNode appears in a
template argument there's nothing that can provide the TargetType.
Normally the COIN is a symbol (leaf) name and takes its TargetType from the
symbol's type, but in a template argument context the COIN can only be
either a non-leaf name piece or a type, and must hence be invalid.
Similar to the COIN check in demangleDeclarator().
Found by oss-fuzz.
llvm-svn: 358421
If we have multiple range checks which can be predicated, hoist the and of the results outside the loop. This minorly cleans up the resulting IR, but the main motivation is as a building block for D60093.
llvm-svn: 358419
Summary:
Some implicit/built-in decls lack the source location
information. Fallback to OrigD that we've seen in the source code
instead of the canonical one in those cases.
Reviewers: sammccall
Subscribers: cfe-commits, arphaman, jkorous, MaskRay, ioeric, ilya-biryukov
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60689
llvm-svn: 358413
Summary:
In r350649, I changed aligned allocation from being available starting
in macosx10.13 to macosx10.14. However, aligned allocation is indeed
available starting with macosx10.13, my investigation had been based
on the wrong libc++abi dylib.
This means that Clang before the fix will be more stringent when it
comes to aligned allocation -- it will not allow it when back-deploying
to macosx 10.13, when it would actually be safe to do so.
Note that a companion change will be coming to fix the libc++ tests.
Reviewers: ahatanak
Subscribers: jkorous, dexonsmith, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60626
llvm-svn: 358409
Summary:
Otherwise, it doesn't take into account things like whether the symbol
is defined or undefined, and whether symbols are indirect references
(re-exports) or not.
Reviewers: EricWF
Subscribers: christof, jkorous, dexonsmith, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D60416
llvm-svn: 358408
Summary:
In GNU objdump, -w/--wide aligns instructions in the disassembly output.
This patch does the same to llvm-objdump. However, we always use the
wide format (-w/--wide is ignored), because the narrow format
(instructions are misaligned) is probably not very useful.
In llvm-readobj, we made a similar decision: always use the wide format,
accept but ignore -W/--wide.
To save some columns, we change the tab before hex bytes (controlled by
--[no-]show-raw-insn) to a space.
Reviewers: rupprecht, jhenderson, grimar
Reviewed By: jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60376
llvm-svn: 358405
Summary:
This makes addDocument non-blocking and would also allow code completion
(in fallback mode) to run when worker waits for the compile command.
Reviewers: sammccall, ilya-biryukov
Reviewed By: ilya-biryukov
Subscribers: javed.absar, MaskRay, jkorous, arphaman, kadircet, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60607
llvm-svn: 358400
Arguments already have a flag to inform backends when they have been split up.
The AArch64 arm64_32 ABI makes use of these on return types too, so that code
emitted for armv7k can be ABI-compliant.
There should be no CodeGen changes yet, just making more information available.
llvm-svn: 358399
The arm64_32 ABI specifies that pointers (despite being 32-bits) should be
zero-extended to 64-bits when passed in registers for efficiency reasons. This
means that the SelectionDAG needs to be able to tell the backend that an
argument was originally a pointer, which is implmented here.
Additionally, some memory intrinsics need to be declared as taking an i8*
instead of an iPTR.
There should be no CodeGen change yet, but it will be triggered when AArch64
backend support for ILP32 is added.
llvm-svn: 358398
This is a resubmission of a previous patch that caused test failures,
with the fixes for the relevant tests included.
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
llvm-svn: 358395
When faced with command line options such as "crtbegin.o appmain.o
-lsomelib crtend.o", GNU ld pulls in all necessary object files from
somelib before proceeding to crtend.o.
LLD operates differently, only loading object files from any
referenced static libraries after processing all input object files.
This uses a similar hack as in the ELF linker. Here, it moves crtend.o
to the end of the vector of object files. This makes sure that
terminator chunks for sections such as .eh_frame gets ordered last,
fixing DWARF exception handling for libgcc and gcc's crtend.o.
Differential Revision: https://reviews.llvm.org/D60628
llvm-svn: 358394
This fixes a test I introduced in change D59191 (that added src0 and
src1 modifiers to the v_cndmask instruction for disassembly purposes).
Spotted by David Binderman in bug 41488.
Differential Revision: https://reviews.llvm.org/D60652
Change-Id: I6ac95e66cd84e812ed3359ad57bcd0e13198ba0c
llvm-svn: 358392
While I can't replicate this locally, it looks like the buildbots don't
recognize the IR block in r358385 l764 as IR. Downgrade it to being just
text while I look into it.
http://lab.llvm.org:8011/builders/llvm-sphinx-docs/builds/30132
llvm-svn: 358391
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds a new class to hold
pattern matching global state.
The table holding the values of FileCheck variable constitutes some sort
of global state for the matching phase, yet is passed as parameters of
all functions using it. This commit create a new FileCheckPatternContext
class pointed at from FileCheckPattern. While it increases the line
count, it separates local data from global state. Later commits build
on that to add numeric expression global state to that class.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60381
llvm-svn: 358390
If you have more than one schedule model in your TableGen target
definitions, then the diagnostic "No schedule information for
instruction 'foo'" is rather unhelpful, because it doesn't tell you
_which_ schedule model is missing the necessary information (or, as it
might be, missing the UnsupportedFeatures definition that would stop
it thinking it needed it).
Extended the message to include the name of the schedule model that
it's complaining about.
Reviewers: nhaehnle, hfinkel, javedabsar, efriedma, javed.absar
Reviewed By: javed.absar
Subscribers: javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60559
llvm-svn: 358389
It didn't handle empty LHS correctly. If two ranges of LHS were
contiguous and jointly contained one range of RHS, it could also be incorrect.
DWARFAddressRange::contains can be removed and its tests can be merged into DWARFVerifier::DieRangeInfo::contains
llvm-svn: 358387
This patch adds documentation explaining how variable location information is
compiled from the IR representation down to the end of the codegen pipeline,
but avoiding discussion of file formats and encoding.
This should make it clearer how the dbg.value / dbg.declare etc intrinsics
are transformed and arranged into DBG_VALUE instructions, and their meaning.
Differential Revision: https://reviews.llvm.org/D59790
llvm-svn: 358385
Summary:
Factor out findAllocaForValue() from ASan so that we can use it in
MSan to handle lifetime intrinsics.
Reviewers: eugenis, pcc
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60615
llvm-svn: 358380
Summary:
For example, a renamed type in a header file can conflict with declaration in
a random file that includes the header, but we should not consider the decl ambiguous if
it's not visible at the rename location. This improves consistency of generated replacements
when header file is included in different TUs.
Reviewers: hokein
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60257
llvm-svn: 358378
Summary:
Addresses https://bugs.llvm.org/show_bug.cgi?id=41170
The AlwaysBreakAfterReturn type setting can go wrong if the line ends with a comment
```
void foo() /* comment */
```
or
```
void foo() // comment
```
It will incorrectly see such functions as Declarations and not Definitions
The following code addresses this by looking for function which end with `; <comment>` rather than just `;` or `<comment>`
Reviewers: klimek, djasper, reuk, russellmcc, owenpan, sammccall
Reviewed By: owenpan
Subscribers: lebedev.ri, cfe-commits, sammccall
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60363
llvm-svn: 358375
Summary:
Use KnownBits::computeForAddSub/computeForAddCarry
in SelectionDAG::computeKnownBits when doing value
tracking for addition/subtraction.
This should improve the precision of the known bits,
as we only used to make a simple estimate of known
zeroes. The KnownBits support functions are also
able to deduce bits that are known to be one in the
result.
Reviewers: spatel, RKSimon, nikic, lebedev.ri
Reviewed By: nikic
Subscribers: nikic, javed.absar, lebedev.ri, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60460
llvm-svn: 358372
Apparently there are some stray IMPLICIT_DEF operations that weren't in the
checks. Not sure if they've always been there or something changed at some
point.
llvm-svn: 358371
Other opcodes shouldn't be CSE'd until we can be sure debug info quality won't
be degraded.
This change also improves the IRTranslator so that in most places, but not all,
it creates constants using the MIRBuilder directly instead of first creating a
new destination vreg and then creating a constant. By doing this, the
buildConstant() method can just return the vreg of an existing G_CONSTANT
instead of having to create a COPY from it.
I measured a 0.2% improvement in compile time and a 0.9% improvement in code
size at -O0 ARM64.
Compile time:
Program base cse diff
test-suite...ark/tramp3d-v4/tramp3d-v4.test 9.04 9.12 0.8%
test-suite...Mark/mafft/pairlocalalign.test 2.68 2.66 -0.7%
test-suite...-typeset/consumer-typeset.test 5.53 5.51 -0.4%
test-suite :: CTMark/lencod/lencod.test 5.30 5.28 -0.3%
test-suite :: CTMark/Bullet/bullet.test 25.82 25.76 -0.2%
test-suite...:: CTMark/ClamAV/clamscan.test 6.92 6.90 -0.2%
test-suite...TMark/7zip/7zip-benchmark.test 34.24 34.17 -0.2%
test-suite :: CTMark/SPASS/SPASS.test 6.25 6.24 -0.1%
test-suite...:: CTMark/sqlite3/sqlite3.test 1.66 1.66 -0.1%
test-suite :: CTMark/kimwitu++/kc.test 13.61 13.60 -0.0%
Geomean difference -0.2%
Code size:
Program base cse diff
test-suite...-typeset/consumer-typeset.test 1315632 1266480 -3.7%
test-suite...:: CTMark/ClamAV/clamscan.test 1313892 1297508 -1.2%
test-suite :: CTMark/lencod/lencod.test 1439504 1423112 -1.1%
test-suite...TMark/7zip/7zip-benchmark.test 2936980 2904172 -1.1%
test-suite :: CTMark/Bullet/bullet.test 3478276 3445460 -0.9%
test-suite...ark/tramp3d-v4/tramp3d-v4.test 8082868 8033492 -0.6%
test-suite :: CTMark/kimwitu++/kc.test 3870380 3853972 -0.4%
test-suite :: CTMark/SPASS/SPASS.test 1434904 1434896 -0.0%
test-suite...Mark/mafft/pairlocalalign.test 764528 764528 0.0%
test-suite...:: CTMark/sqlite3/sqlite3.test 782092 782092 0.0%
Geomean difference -0.9%
Differential Revision: https://reviews.llvm.org/D60580
llvm-svn: 358369
Because CodeGen can't depend on GlobalISel, we need a way to encapsulate the CSE
configs that can be passed between TargetPassConfig and the targets' custom
pass configs. This CSEConfigBase allows targets to create custom CSE configs
which is then used by the GISel passes for the CSEMIRBuilder.
This support will be used in a follow up commit to allow constant-only CSE for
-O0 compiles in D60580.
llvm-svn: 358368
Nico Weber