This is a simple hack based on what's proposed in D37686, but we can extend it if needed in follow-ups.
It gets us most of the FMF functionality that we want without adding any state bits to the flags. It
also intentionally leaves out non-FMF flags (nsw, etc) to minimize the patch.
It should provide a superset of the functionality from D46563 - the extra tests show propagation and
codegen diffs for fcmp, vecreduce, and FP libcalls.
The PPC log2() test shows the limits of this most basic approach - we only applied 'afn' to the last
node created for the call. AFAIK, there aren't any libcall optimizations based on the flags currently,
so that shouldn't make any difference.
Differential Revision: https://reviews.llvm.org/D46854
llvm-svn: 332358
Btver2 - VCVTPH2PSYrm needs to double pump the AGU
Broadwell - missing VCVTPS2PH*mr stores extra latency
Allows us to remove the WriteCvtF2FSt conversion store class
llvm-svn: 332357
This is a resubmit of r331868 (D46583), which was reverted due to
failures on the PS4 bot.
These have been resolved with r332246/D46748.
llvm-svn: 332349
When two interposable functions are merged, we cannot replace
uses and have to emit calls to a common internal function. However,
writeThunk() will not actually emit a thunk if the function is too
small. This leaves us in a broken state where mergeTwoFunctions
already rewired the functions, but writeThunk doesn't do anything.
This patch changes the implementation so that:
* writeThunk() does just that.
* The direct replacement of calls is moved into mergeTwoFunctions()
into the non-interposable case only.
* isThunkProfitable() is extracted and will be called for
the non-iterposable case always, and in the interposable case
only if uses are still left after replacement.
This issue has been introduced in https://reviews.llvm.org/D34806,
where the code for checking thunk profitability has been moved.
Differential Revision: https://reviews.llvm.org/D46804
Reviewed By: whitequark
llvm-svn: 332342
Summary:
New unsigned saturation downconvert patterns detection was implemented in
X86 Codegen:
(truncate (smin (smax (x, C1), C2)) to dest_type),
where C1 >= 0 and C2 is unsigned max of destination type.
(truncate (smax (smin (x, C2), C1)) to dest_type)
where C1 >= 0, C2 is unsigned max of destination type and C1 <= C2.
These two patterns are equivalent to:
(truncate (umin (smax(x, C1), unsigned_max_of_dest_type)) to dest_type)
Reviewers: RKSimon
Subscribers: llvm-commits, a.elovikov
Differential Revision: https://reviews.llvm.org/D45315
llvm-svn: 332336
As requested in D46858, pulling this function into its own lambda makes it
easier to read that part of the code and reason as to what's going on because
the scope it can be called from is extremely limited. We want to keep it as a
function because it's called from the two subsequent lines.
llvm-svn: 332325
1. Deine FeatureRelax to enable/disable linker relaxation.
2. Define shouldForceRelocation to preserve relocation types even if the fixup
can be resolved when linker relaxation enabled. This is necessary for
correctness as offsets may change during relaxation.
Differential Revision: https://reviews.llvm.org/D46674
llvm-svn: 332318
This adds a -debugify-each mode to opt which, when enabled, wraps each
{Module,Function}Pass in a pipeline with logic to add, check, and strip
synthetic debug info for testing purposes.
This mode can be used to test complex pipelines for debug info bugs, or
to collect statistics about the number of debug values & locations lost
throughout various stages of a pipeline.
Patch by Son Tuan Vu!
Differential Revision: https://reviews.llvm.org/D46525
llvm-svn: 332312
Summary:
bugpoint has several options specified as `PositionalEatArgs` to pass
options through to the underlying tool, e.g. `-tool-args`. The `-help`
message suggests the usage is: `-tool-args=<string>`. However, this is
misleading, because that's not how these arguments work. Rather than taking
a value, the option consumes all positional arguments until the next
recognized option (or all arguments if `--` is specified at some point).
To make this slightly clearer, instead print the help as:
```
-tool-args <string>... - <tool arguments>...
```
Additionally, add an error if the user attempts to use a `PositionalEatArgs`
argument with a value, instead of silently ignoring it. Example:
```
./bin/bugpoint -tool-args=-mpcu=skylake-avx512
bugpoint: for the -tool-args option: This argument does not take a value.
Instead, it consumes any positional arguments until the next recognized option.
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D46787
llvm-svn: 332311
Summary:
Part of the InstCombine code for simplifying GEPs looks through
addrspacecasts. However, this was done by updating a variable
also used by the next transformation, for marking GEPs as
inbounds. This led to replacing a GEP with a similar instruction
in a different addrspace, which caused an assertion failure in RAUW.
This caused julia issue https://github.com/JuliaLang/julia/issues/27055
Patch by Jeff Bezanson <jeff@juliacomputing.com>
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D46722
llvm-svn: 332302
Summary:
In https://bugs.llvm.org/show_bug.cgi?id=37006 Nico Weber points out a
flaw in `OptTable::findNearest`: if an option "foo"'s prefixes are "--"
and "-", then the nearest option for "--fob" will be "-foo". This is
incorrect, however, since the function is expected to return "--foo".
The bug is due to a naive loop that attempts to predetermines which
prefix is best. Instead, compute the edit distance for each prefix/name
pair.
Test Plan: `check-llvm`
Reviewers: thakis
Reviewed By: thakis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46776
llvm-svn: 332299
Extract information related to a "unit header" from DWARFUnit into a
new DWARFUnitHeader class, and add a DWARFUnit member for the header.
This is one step in the direction of allowing type units in the
.debug_info section for DWARF v5.
Differential Revision: https://reviews.llvm.org/D46707
llvm-svn: 332289
Summary:
The BranchFolding pass is currently missing opportunities to hoist
common code if the hoisted-to block contains a single conditional branch
that has register uses. This occurs somewhat frequently on AArch64 with
CBZ/TBZ opcodes.
This change also eliminates some code differences when debug info is
present since the presence of e.g. DBG_VALUE instructions in the
hoisted-to block can enable hoisting that wouldn't have occurred without
them.
Reviewers: MatzeB, rnk, kparzysz, twoh, aprantl, javed.absar
Subscribers: kristof.beyls, JDevlieghere, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D46324
llvm-svn: 332265
xsrqpi is currently using Z23Form_1.
The instruction format is xsrqpi R,VRT,VRB,RMC.
Rathar than bits 11-15 being used for FRA, it should have
bits 11-14 reserved and bit 15 for R. This patch adds a new
class Z23Form_4 to fix the instruction format.
Differential Revision: https://reviews.llvm.org/D46761
llvm-svn: 332253
When storing the 0th lane of a vector, use a simpler and usually more efficient scalar store instead.
Differential revision: https://reviews.llvm.org/D46655
llvm-svn: 332251
Summary:
If we are not emitting a linkage name in the .debug_info sections, we
should not add it into the index either. This makes sure our index is
consistent with the actual debug info.
I am also explicitly setting the --dwarf-linkage-names=All in the
name-collsions test as that one would now fail on targets where this
defaults to "Abstract" (in fact, it would have failed already if there
wasn't a bug in the DWARF verifier, which I fix as well).
Reviewers: probinson, aprantl, JDevlieghere
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46748
llvm-svn: 332246
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Summary:
The first foray into merging debug info into the echo tests.
- Add bindings to Module::getModuleFlagsMetadata() in the form of LLVMCopyModuleFlagsMetadata
- Add the opaque type LLVMModuleFlagEntry to represent Module::ModuleFlagEntry
- Add accessors for LLVMModuleFlagEntry's behavior, key, and metadata node.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: aprantl, JDevlieghere, llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46792
llvm-svn: 332219
This pass is
a) broken.
b) r600 specific.
Fixing (a) is a bit more non-trivial, but fixing (b)
is easy. Move this pass to being R600 only for now.
This pass does pass all the unit tests, however clang
no longer generates code that looks like the unit test
input, so fixing the pass requires fixing the tests and
the pass as one, and checking it works with clang still.
Patch by Dave Airlie
llvm-svn: 332196
Sanjay Patel