Follow-up for D74433
What the function returns are almost standard BFD names, except that "ELF" is
in uppercase instead of lowercase.
This patch changes "ELF" to "elf" and changes ARM/AArch64 to use their BFD names.
MIPS and PPC64 have endianness differences as well, but this patch does not intend to address them.
Advantages:
* llvm-objdump: the "file format " line matches GNU objdump on ARM/AArch64 objects
* "file format " line can be extracted and fed into llvm-objcopy -O literally.
(https://github.com/ClangBuiltLinux/linux/issues/779 has such a use case)
Affected tools: llvm-readobj, llvm-objdump, llvm-dwarfdump, MCJIT (internal implementation detail, not exposed)
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76046
The new behavior matches GNU objdump. A pair of angle brackets makes tests slightly easier.
`.foo:` is not unique and thus cannot be used in a `CHECK-LABEL:` directive.
Without `-LABEL`, the CHECK line can match the `Disassembly of section`
line and causes the next `CHECK-NEXT:` to fail.
```
Disassembly of section .foo:
0000000000001634 .foo:
```
Bdragon: <> has metalinguistic connotation. it just "feels right"
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75713
Reported at https://reviews.llvm.org/D64930#1642223
If the only section of a PT_LOAD is a SHT_NOBITS section (e.g. .bss), we
may not align its sh_offset. p_offset of the PT_LOAD will be set to
sh_offset, and we will get p_offset!=p_vaddr (mod p_align). If such
executable is mapped by the Linux kernel, it will segfault.
After D64906, this may happen the non-linker script case.
The linker script case has had this issue for a long time.
This was fixed by rL321657 (but the test linkerscript/nobits-offset.s
failed to test a SHT_NOBITS section), but broken by rL345154.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D66658
llvm-svn: 369828
This patch
1) adds -z separate-code and -z noseparate-code (default).
2) changes the condition that the last page of last PF_X PT_LOAD is
padded with trap instructions.
Current condition (after D33630): if there is no `SECTIONS` commands.
After this change: if -z separate-code is specified.
-z separate-code was introduced to ld.bfd in 2018, to place the text
segment in its own pages. There is no overlap in pages between an
executable segment and a non-executable segment:
1) RX cannot load initial contents from R or RW(or non-SHF_ALLOC).
2) R and RW(or non-SHF_ALLOC) cannot load initial contents from RX.
lld's current status:
- Between R and RX: in `Writer<ELFT>::fixSectionAlignments()`, the start of a
segment is always aligned to maxPageSize, so the initial contents loaded by R
and RX do not overlap. I plan to allow overlaps in D64906 if -z noseparate-code
is in effect.
- Between RX and RW(or non-SHF_ALLOC if RW doesn't exist):
we currently unconditionally pad the last page to commonPageSize
(defaults to 4096 on all targets we support).
This patch will make it effective only if -z separate-code is specified.
-z separate-code is a dubious feature that intends to reduce the number
of ROP gadgets (which is actually ineffective because attackers can find
plenty of gadgets in the text segment, no need to find gadgets in
non-code regions).
With the overlapping PT_LOAD technique D64906, -z noseparate-code
removes two more alignments at segment boundaries than -z separate-code.
This saves at most defaultCommonPageSize*2 bytes, which are significant
on targets with large defaultCommonPageSize (AArch64/MIPS/PPC: 65536).
Issues/feedback on alignment at segment boundaries to help understand
the implication:
* binutils PR24490 (the situation on ld.bfd is worse because they have
two R-- on both sides of R-E so more alignments.)
* In binutils, the 2018-02-27 commit "ld: Add --enable-separate-code" made -z separate-code the default on Linux.
d969dea983
In musl-cross-make, binutils is configured with --disable-separate-code
to address size regressions caused by -z separate-code. (lld actually has the same
issue, which I plan to fix in a future patch. The ld.bfd x86 status is
worse because they default to max-page-size=0x200000).
* https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=237676 people want
smaller code size. This patch will remove one alignment boundary.
* Stef O'Rear: I'm opposed to any kind of page alignment at the
text/rodata line (having a partial page of text aliased as rodata and
vice versa has no demonstrable harm, and I actually care about small
systems).
So, make -z noseparate-code the default.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64903
llvm-svn: 367537
This improves readability and the behavior is consistent with GNU objdump.
The new test test/tools/llvm-objdump/X86/disassemble-section-name.s
checks we print newlines before and after "Disassembly of section ...:"
Differential Revision: https://reviews.llvm.org/D61127
llvm-svn: 359668
Also change some options that have different semantics (cause confusion) in llvm-readelf mode:
-s => -S
-t => --symbols
-sd => --section-data
llvm-svn: 359651
r352366 "[llvm-objdump] - Print LMAs when dumping section headers." changed the format of
llvm-objdump output. We have to update the LLD tests.
llvm-svn: 352372
With this patch, lld creates a .note.GNU_stack and adds that to an
output file if it is creating a re-linkable object file (i.e. if -r
is given). If we don't do this, and if you use GNU linkers as a final
linker, they create an executable whose stack area is executable,
which is considered pretty bad these days.
Differential Revision: https://reviews.llvm.org/D51400
llvm-svn: 340902
When the data segment is the last segment, it is correct to leave
it unaligned. However, when the code segment is the last segment,
it should be aligned to the page boundary to avoid loading the
non-segment parts of the ELF file at the end of the file.
Differential Revision: https://reviews.llvm.org/D33630
llvm-svn: 309829
Align to the large page size (known as a superpage or huge page).
FreeBSD automatically promotes large, superpage-aligned allocations.
Differential Revision: https://reviews.llvm.org/D27042
llvm-svn: 287782
Unlike gold, bfd, gas or MC we were putting exidx sections first since
they are ro.
The spec doesn't explicitly say that they must come after, but it is
definitely more convenient for the consumer, matches other producers
and matches other areas in ELF (like SHT_GROUP) where sections are
ordered in a natural way.
llvm-svn: 286659
We would create a MergeInputSection for the synthetic .comment and
crash trying to add it to a regular output section.
With this we just don't add the synthetic section with -r. That is
consistent with gold that doesn't create .note.gnu.gold-version with
-r.
llvm-svn: 286635
Summary:
This patch adds a ".comment" section to an output. The comment
section contains the linker's version string. You can now
find out whether a binary is created by LLD or not using objdump
command like this.
$ objdump -s -j .comment foo
foo: file format elf64-x86-64
Contents of section .comment:
0000 00474343 3a202855 62756e74 7520342e .GCC: (Ubuntu 4.
0010 382e342d 32756275 6e747531 7e31342e 8.4-2ubuntu1~14.
...
00c0 766d2f74 72756e6b 20323835 38343629 vm/trunk 285846)
00d0 004c696e 6b65723a 204c4c44 20342e30 .Linker: LLD 4.0
00e0 2e302028 7472756e 6b203238 36343036 .0 (trunk 286406
00f0 2900 ).
Compilers emits .comment section as well, so the output contains
both compiler and linker information.
Alternative considered:
I first tried to add a SHT_NOTE section because GNU gold does that.
A NOTE section starts with a header which contains content type.
It turned out that ld.gold sets type NT_GNU_GOLD_VERSION to their
NOTE section. So the NOTE type is only for GNU gold (surprise!)
Next, I tried to create ".linker-version" section. However, it seems
that reusing the existing ".comment" section is better because 1)
other tools already know about .comment section and is able to strip
it and 2) the result contans not only linker info but also compiler
info.
Differential Revision: https://reviews.llvm.org/D26487
llvm-svn: 286496
When generating relocatable output SHT_NOBITS sections
were still occupy the file space.
Differential revision: http://reviews.llvm.org/D17857
llvm-svn: 262650
-r, -relocatable - Generate relocatable output
Currently does not have support for files containing
relocation sections with entries that refer to local
symbols (like rel[a].eh_frame which refer to sections
and not to symbols)
Differential revision: http://reviews.llvm.org/D14382
llvm-svn: 261838
Fangrui Song