Fixed a case where multiple threads can be asking to send a packet to the GDB server and one of three things will happen:
1 - everything works
2 - one thread will fail to send the packet due to not being able to get the sequence mutex
3 - one thread will try and interrupt the other packet sending and fail and not send the packet
Now the flow is a bit different. Prior to this fix we did:
if (try_get_sequence_mutex()) {
send_packet()
return success;
} else {
if (async_ok) {
interrupt()
send_packet()
resume()
return success;
}
}
return fail
The issue is that the call to "try_get_sequence_mutex()" could fail if another thread was sending a packet and could cause us to just not send the packet and an error would be returned.
What we really want is to try and get the sequence mutex, and if this succeeds, send the packet. Else check if we are running and if we are, do what we used to do. The big difference is when we aren't running, we wait for the sequence mutex so we don't drop packets. Pseudo code is:
if (try_get_sequence_mutex()) {
// Safe to send the packet right away
send_packet()
return success;
} else {
if (running) {
// We are running, interrupt and send async packet if ok to do so,
// else it is ok to fail
if (async_ok) {
interrupt()
send_packet()
resume()
return success;
}
}
else {
// Not running, wait for the sequence mutex so we don't drop packets
get_sequence_mutex()
send_packet()
return success;
}
}
return fail
llvm-svn: 157751
Fixed an issue with the symbol table parsing of files that have STAB entries in them where there are two N_SO entries where the first has a directory, and the second contains a full path:
[ 0] 00000002 64 (N_SO ) 00 0000 0000000000000000 '/Volumes/data/src/'
[ 1] 0000001e 64 (N_SO ) 00 0000 0000000000000000 '/Volumes/data/src/Source/main.m'
[ 2] 00000047 66 (N_OSO ) 09 0001 000000004fc642d2 '/tmp/main.o'
[ 3] 00000001 2e (N_BNSYM ) 01 0000 0000000000003864
[ 4] 000000bd 24 (N_FUN ) 01 0000 0000000000003864 '_main'
[ 5] 00000001 24 (N_FUN ) 00 0000 00000000000000ae
[ 6] 00000001 4e (N_ENSYM ) 01 0000 00000000000000ae
[ 7] 00000001 64 (N_SO ) 01 0000 0000000000000000
We now correctly combine entries 0 and 1 into a single entry.
llvm-svn: 157712
setting breakpoints. That's dangerous, since while we are setting a breakpoint,
the target might hit the dyld load notification, and start removing modules from
the list. This change adds a GetMutex accessor to the ModuleList class, and
uses it whenever we are accessing the target's ModuleList (as returned by GetImages().)
<rdar://problem/11552372>
llvm-svn: 157668
Also replace hard-coded paths with a variable.
Fixed a comment.
Included missing dependencies on Mac OS X (lldbPluginDynamicLoaderPOSIX.a
is a common dependency).
We can't use EXPORTED_SYMBOL_FILE on Darwin right now, don't pass it to
the linker just yet.
llvm-svn: 157618
A local std::string was being filled in and then the function would return "s.c_str()".
A local StreamString (which contains a std::string) was being filled in, and essentially also returning the c string from the std::string, though it was in a the StreamString class.
The fix was to not do this by passing a stream object into StringList::Join() and fix the "arch_helper()" function to do what it should: cache the result in a global.
llvm-svn: 157519
Make 'help arch' return the list of supported architectures.
Add a convenience method StringList::Join(const char *separator) which is called from the help function for 'arch'.
Also add a simple test case.
llvm-svn: 157507
these functions will end in the sequence
mov %rbp, %rsp
ret
call __stack_chk_fail
instead of the usual mov, ret. The x86 assembly profiler only looked
for functions ending in 'ret' and added the Unwind row describing how to
set the CFA based on that -- the addition of the call insn (which is jumped
to earlier in the function body) threw off that inspection.
Resolves the need to "step" twice to get out of these functions when doing
source-level stepping.
<rdar://problem/11469705>
llvm-svn: 157454
Sending async packets can deadlock a program on darwin. We currently allow breakpoint packets and memory read/write packets (for software breakpoints) to be sent while a program is running. In the GDB remote plug-in, we will interrupt the run, send the async packet and resume (currently with the continue packet that caused the program to resume). If the GDB server supports the "vCont" packet, we might have initially continued with each thread stating it should continue. If new threads show up while we are stopped, which happend when running GCD, we can end up with new threads that we aren't mentioning in the continue list. So we start with a thread list of 1,2,3 and continue:
continue thread 1, continue thread 2, continue thread 3
Now we interrupt and set a breakpoint and we actually have threads 1,2,3,4 now when we are about to resume, yet we send:
continue thread 1, continue thread 2, continue thread 3
Any thread that isn't mentioned is currently going to stay suspended. This causes the deadlock.
llvm-svn: 157439
Supports the use-case scenario of immediately continuing the process once attached.
Add a simple completion test case from "process attach --con" to "process attach --continue ".
llvm-svn: 157361
Add default Process::GetWatchpointSupportInfo() impl which returns an error of "not supported".
Add "qWatchpointSupportInfo" packet to the gdb communication layer to support this, and modify TestWatchpointCommands.py to test it.
llvm-svn: 157345
the value_regs field, which is useful for future expansion purposes. As of now, we have:
calculated_offset_of_eax = offset_of_rax + (offset_of_eax_from_the_descriptor which is 0)
llvm-svn: 157275
Add convenience registers eax, ebx, ecx, edx, edi, esi, ebp, esp to the 'register read' command for x86_64.
Add a GDBRemoteRegisterContext::Addx86_64ConvenienceRegisters() method called from ProcessGDBRemote::BuildDynamicRegisterInfo().
Servicing of eax, for example, is accomplished by delegating to rax with an adjusted offset into the register context.
llvm-svn: 157230
"break set" commands to set this per breakpoint. Also, some CreateBreakpoint API's in the lldb_private
namespace had "internal" first and "skip_prologue" second. "internal should always be last. Fixed that.
rdar://problem/11484729
llvm-svn: 157225
(actually, mainly just hooked up support that was already
there). Added a test case, although it's expected to fail
right now unless you're using top-of-tree LLVM.
llvm-svn: 157220
we delete the watchpoint. The test succeeds when no more watchpoint hit event fires after the deletion of the watchpoint.
related to rdar://problem/11320188
llvm-svn: 157084
<rdar://problem/11455913>
"target symbol add" should flush the cached frames
"register write" should flush the thread state in case registers modifications change stack
llvm-svn: 157042
For "process attach", make the success criterion as the inferior changes its state to eStateStopped.
Otherwise, mark it as a failure and say so.
llvm-svn: 157036
The "run" and "r" aliases were for gdb compatability, so make then do what GDB does by default: launch in a shell.
For those that don't want launching with a shell by default, add the following to your ~/.lldbinit file:
command unalias run
command unalias r
command alias r process launch --
command alias run process launch --
llvm-svn: 157028
boxed expressions returning numbers and strings.
I also added boxed expressions to our testcases, and
enabled boxed expressions when libarclite is linked into
the inferior.
llvm-svn: 157026
path on rerunning, evict the old module from the target module list, inform the breakpoints
about this so they can do something intelligent as well.
rdar://problem/11273043
llvm-svn: 157008
TestBackticksWithoutATarget.BackticksWithNoTargetTestCase was calling
GetDummyTarget() when executing for x86_64. When performing session
tearDown, it would get destroyed (and everything would be invalid (arch,
etc).
Then the test would run for i386. The dummy target wasn't being
reinitialized and was invalid. lldb complained that 'current process state
is unsuitable for expression parsing'.
llvm-svn: 156994
various other syntactic sugar work. Lambdas do
not due to some problems relocating code containing
lambdas. Rvalue references work when returned from
expressions, but need more testing.
llvm-svn: 156948
This test is run after TestAbbreviations and was making runCmd("h") fail
in that test, on the second tested architecture (two commands would be
avilable for "h": "help" and "hello").
Later I'm sending a patch for review to add some information to the error
message for that case.
llvm-svn: 156918
Sean Callanan