* msa SubtargetFeature
* registers
* ld.[bhwd], and st.[bhwd] instructions
Does not correctly prohibit use of both 32-bit FPU registers and MSA together.
Patch by Daniel Sanders
llvm-svn: 188313
mips16/mips32 floating point interoperability.
This patch fixes returns from mips16 functions so that if the function
was in fact called by a mips32 hard float routine, then values
that would have been returned in floating point registers are so returned.
Mips16 mode has no floating point instructions so there is no way to
load values into floating point registers.
This is needed when returning float, double, single complex, double complex
in the Mips ABI.
Helper functions in libc for mips16 are available to do this.
For efficiency purposes, these helper functions have a different calling
convention from normal Mips calls.
Registers v0,v1,a0,a1 are used to pass parameters instead of
a0,a1,a2,a3.
This is because v0,v1,a0,a1 are the natural registers used to return
floating point values in soft float. These values can then be moved
to the appropriate floating point registers with no extra cost.
The only register that is modified is ra in this call.
The helper functions make sure that the return values are in the floating
point registers that they would be in if soft float was not in effect
(which it is for mips16, though the soft float is implemented using a mips32
library that uses hard float).
llvm-svn: 181641
Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this
would happen as long as floating point instructions are not needed.
Probably it would also make sense to compile as mips32 if atomic operations
are needed too. There may be other cases too.
A module pass prescans the IR and adds the mips16 or nomips16 attribute
to functions depending on the functions needs.
Mips 16 mode can result in a 40% code compression by utililizing 16 bit
encoding of many instructions.
The hope is for this to replace the traditional gcc way of dealing with
Mips16 code using floating point which involves essentially using soft float
but with a library implemented using mips32 floating point. This gcc
method also requires creating stubs so that Mips32 code can interact with
these Mips 16 functions that have floating point needs. My conjecture is
that in reality this traditional gcc method would never win over this
new method.
I will be implementing the traditional gcc method also. Some of it is already
done but I needed to do the stubs to finish the work and those required
this mips16/32 mixed mode capability.
I have more ideas for to make this new method much better and I think the old
method will just live in llvm for anyone that needs the backward compatibility
but I don't for what reason that would be needed.
llvm-svn: 179185
and mips16 on a per function basis.
Because this patch is somewhat involved I have provide an overview of the
key pieces of it.
The patch is written so as to not change the behavior of the non mixed
mode. We have tested this a lot but it is something new to switch subtargets
so we don't want any chance of regression in the mainline compiler until
we have more confidence in this.
Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1.
For that reason there are derived versions of the register info, frame info,
instruction info and instruction selection classes.
Now we register three separate passes for instruction selection.
One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then
one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and
MipsSEISelDAGToDAG.cpp).
When the ModuleISel pass runs, it determines if there is a need to switch
subtargets and if so, the owning pointers in MipsTargetMachine are
appropriately changed.
When 16Isel or SEIsel is run, they will return immediately without doing
any work if the current subtarget mode does not apply to them.
In addition, MipsAsmPrinter needs to be reset on a function basis.
The pass BasicTargetTransformInfo is substituted with a null pass since the
pass is immutable and really needs to be a function pass for it to be
used with changing subtargets. This will be fixed in a follow on patch.
llvm-svn: 179118
This calling convention was added just to handle functions which return vector
of floats. The fix committed in r165585 solves the problem.
llvm-svn: 176530
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
Support for Mips register information sections.
Mips ELF object files have a section that is dedicated
to register use info. Some of this information such as
the assumed Global Pointer value is used by the linker
in relocation resolution.
The register info file is .reginfo in o32 and .MIPS.options
in 64 and n32 abi files.
This patch contains the changes needed to create the sections,
but leaves the actual register accounting for a future patch.
Contributer: Jack Carter
llvm-svn: 172847
missed in the first pass because the script didn't yet handle include
guards.
Note that the script is now able to handle all of these headers without
manual edits. =]
llvm-svn: 169224
instruction encodings can be excluded during mips16 processing.
This revision fixes the issue raised by Jim Grosbach.
bool hasStandardEncoding() const { return !inMips16Mode(); }
When micromips is added it will be
bool StandardEncoding() const { return !inMips16Mode()&& !inMicroMipsMode(); }
No additional testing is needed other than to assure that there is no regression
from this patch.
Patch by Reed Kotler.
llvm-svn: 157234
llc to recognize MIPS16 as a MIPS ASE extension. -mips16 will mean the
mips16 ASE for mips32 by default.
As part of fixing of adding this we discovered some small changes that
need to be made to MipsInstrInfo::storeRegToStackSLot and
MipsInstrInfo::loadRegFromStackSlot. We were using some "==" equality tests
where in fact we should have been using Mips::<regclas>.hasSubClassEQ instead,
per suggestion of Jakob Stoklund Olesen.
Patch by Reed Kotler.
llvm-svn: 156958
itineraries.
- Refactor TargetSubtarget to be based on MCSubtargetInfo.
- Change tablegen generated subtarget info to initialize MCSubtargetInfo
and hide more details from targets.
llvm-svn: 134257
be the first encoded as the first feature. It then uses the CPU name to look up
features / scheduling itineray even though clients know full well the CPU name
being used to query these properties.
The fix is to just have the clients explictly pass the CPU name!
llvm-svn: 134127
options, which don't appear to be useful. -enable-mips-absolute-call is
completely unused (and unless I'm mistaken, is supposed to have the
same effect that -relocation-model=dynamic-no-pic should have),
and -disable-mips-abicall appears to be effectively a
synonym for -relocation-model=static. Adjust the few users of hasABICall
to checks which seem more appropriate. Update MipsSubtarget,
MipsTargetMachine, and MipselTargetMachine to synchronize with recent
changes.
llvm-svn: 77938
Module*.
Also, dropped uses of TargetMachine where unnecessary. The only target which
still takes a TargetMachine& is Mips, I would appreciate it if someone would
normalize this to match other targets.
llvm-svn: 77918
Added HasABICall and HasAbsoluteCall (equivalent to gcc -mabicall and
-mno-shared). HasAbsoluteCall is not implemented but HasABICall is the
default for o32 ABI. Now, both should help into a more accurate
relocation types implementation.
Added IsLinux is needed to choose between asm directives.
Instruction name strings cleanup.
AsmPrinter improved.
llvm-svn: 53551
important.
- Cleanup in the Subtarget info with addition of new features, not all support
yet, but they allow the future inclusion of features easier. Among new features,
we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit
integer
and float registers, allegrex vector FPU (VFPU), single float only support.
- TargetMachine now detects allegrex core.
- Added allegrex (Mips32r2) sext_inreg instructions.
- *Added Float Point Instructions*, handling single float only, and
aliased accesses for 32-bit FPUs.
- Some cleanup in FP instruction formats and FP register classes.
- Calling conventions improved to support mips 32-bit EABI.
- Added Asm Printer support for fp cond codes.
- Added support for sret copy to a return register.
- EABI support added into LowerCALL and FORMAL_ARGS.
- MipsFunctionInfo now keeps a virtual register per function to track the
sret on function entry until function ret.
- MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...),
FP cond codes mapping and initial FP Branch Analysis.
- Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond,
FPCmp
- MipsTargetLowering : handling different FP classes, Allegrex support, sret
return copy, no homing location within EABI, non 32-bit stack objects
arguments, and asm constraint for float.
llvm-svn: 53146
- Modifications from the last patch included
(issues pointed by Evan Cheng are now fixed).
- Added more MipsI instructions.
- Added more patterns to match branch instructions.
llvm-svn: 37461
Jack Carter