Summary:
Since we are planning to add ADDIStocHA for 32bit in later patch, we decided
to change 64bit one first to follow naming convention with 8 behind opcode.
Patch by: Xiangling_L
Differential Revision: https://reviews.llvm.org/D64814
llvm-svn: 366731
Summary:
Pointed out in a comment for D49754, register spilling will currently
spill SPE registers at almost any offset. However, the instructions
`evstdd` and `evldd` require a) 8-byte alignment, and b) a limit of 256
(unsigned) bytes from the base register, as the offset must fix into a
5-bit offset, which ranges from 0-31 (indexed in double-words).
The update to the register spill test is taken partially from the test
case shown in D49754.
Additionally, pointed out by Kei Thomsen, globals will currently use
evldd/evstdd, though the offset isn't known at compile time, so may
exceed the 8-bit (unsigned) offset permitted. This fixes that as well,
by forcing it to always use evlddx/evstddx when accessing globals.
Part of the patch contributed by Kei Thomsen.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54409
llvm-svn: 366318
Summary: llvm/IR/GlobalValue.h can't be included in MC, that creates a circular dependency between MC and IR libraries. This circular dependency is causing an issue for build system that enforce layering.
Author: Xiangling_L
Reviewers: sfertile, jasonliu, hubert.reinterpretcast, gribozavr
Reviewed By: gribozavr
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64445
llvm-svn: 365701
Summary:
"ww" and "ws" are both constraint codes for VSX vector registers that
hold scalar double data. "ww" is preferred for float while "ws" is
preferred for double.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D64119
llvm-svn: 365106
Summary:
This is the backend part of [[ https://bugs.llvm.org/show_bug.cgi?id=42457 | PR42457 ]].
In middle-end, we'd want to prefer the form with two adds - D63992,
but as this diff shows, not every target will prefer that pattern.
Out of 4 targets for which i added tests all seem to be ok with inc-of-add for scalars,
but only X86 prefer that same pattern for vectors.
Here i'm adding a new TLI hook, always defaulting to the inc-of-add,
but adding AArch64,ARM,PowerPC overrides to prefer inc-of-add only for scalars.
Reviewers: spatel, RKSimon, efriedma, t.p.northover, hfinkel
Reviewed By: efriedma
Subscribers: nemanjai, javed.absar, kristof.beyls, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64090
llvm-svn: 365010
This was reported in https://bugs.llvm.org/show_bug.cgi?id=41751
llvm-mc aborted when disassembling tabortdc.
This patch try to clean up TM related DAGs.
* Fixes the problem by remove explicit output of cr0, and put it as implicit def.
* Update int_ppc_tbegin pattern to accommodate the implicit def of cr0.
* Update the TCHECK operand and int_ppc_tcheck accordingly.
* Add some builtin test and disassembly tests.
* Remove unused CRRC0/crrc0
Differential Revision: https://reviews.llvm.org/D61935
llvm-svn: 364544
This was just an omission in the back end. We have had the instructions for both
single and double precision for a few HW generations, but never got around to
legalizing these.
Differential revision: https://reviews.llvm.org/D63634
llvm-svn: 364373
Avoids using a plain unsigned for registers throughoug codegen.
Doesn't attempt to change every register use, just something a little
more than the set needed to build after changing the return type of
MachineOperand::getReg().
llvm-svn: 364191
Summary:
SPE passes doubles the same as soft-float, in register pairs as i32
types. This is all handled by the target-independent layer. However,
this is not optimal when splitting or reforming the doubles, as it
pushes to the stack and loads from, on either side.
For instance, to pass a double argument to a function, assuming the
double value is in r5, the sequence currently looks like this:
evstdd 5, X(1)
lwz 3, X(1)
lwz 4, X+4(1)
Likewise, to form a double into r5 from args in r3 and r4:
stw 3, X(1)
stw 4, X+4(1)
evldd 5, X(1)
This optimizes the fence to use SPE instructions. Now, to pass a double
to a function:
mr 4, 5
evmergehi 3, 5, 5
And to form a double into r5 from args in r3 and r4:
evmergelo 5, 3, 4
This is comparable to the way that gcc generates the double splits.
This also fixes a bug with expanding builtins to libcalls, where the
LowerCallTo() code path was generating intermediate illegal type nodes.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jfb, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54583
llvm-svn: 363526
Summary:
If the nested loop is an innermost loop, prefer to a 32-byte alignment, so that
we can decrease cache misses and branch-prediction misses. Actual alignment of
the loop will depend on the hotness check and other logic in alignBlocks.
The old code will only align hot loop to 32 bytes when the LoopSize larger than
16 bytes and smaller than 32 bytes, this patch will align the innermost hot loop
to 32 bytes not only for the hot loop whose size is 16~32 bytes.
Reviewed By: steven.zhang, jsji
Differential Revision: https://reviews.llvm.org/D61228
llvm-svn: 363495
As discussed on D62910, we need to check whether particular types of memory access are allowed, not just their alignment/address-space.
This NFC patch adds a MachineMemOperand::Flags argument to allowsMemoryAccess and allowsMisalignedMemoryAccesses, and wires up calls to pass the relevant flags to them.
If people are happy with this approach I can then update X86TargetLowering::allowsMisalignedMemoryAccesses to handle misaligned NT load/stores.
Differential Revision: https://reviews.llvm.org/D63075
llvm-svn: 363179
Patch which introduces a target-independent framework for generating
hardware loops at the IR level. Most of the code has been taken from
PowerPC CTRLoops and PowerPC has been ported over to use this generic
pass. The target dependent parts have been moved into
TargetTransformInfo, via isHardwareLoopProfitable, with
HardwareLoopInfo introduced to transfer information from the backend.
Three generic intrinsics have been introduced:
- void @llvm.set_loop_iterations
Takes as a single operand, the number of iterations to be executed.
- i1 @llvm.loop_decrement(anyint)
Takes the maximum number of elements processed in an iteration of
the loop body and subtracts this from the total count. Returns
false when the loop should exit.
- anyint @llvm.loop_decrement_reg(anyint, anyint)
Takes the number of elements remaining to be processed as well as
the maximum numbe of elements processed in an iteration of the loop
body. Returns the updated number of elements remaining.
llvm-svn: 362774
Use the PPC vector min/max instructions for computing the corresponding
operation as these should be faster than the compare/select sequences
we currently emit.
Differential revision: https://reviews.llvm.org/D47332
llvm-svn: 362759
Summary:
(1) Function descriptor on AIX
On AIX, a called routine may have 2 distinct symbols associated with it:
* A function descriptor (Name)
* A function entry point (.Name)
The descriptor structure on AIX is the same as those in the ELF V1 ABI:
* The address of the entry point of the function.
* The TOC base address for the function.
* The environment pointer.
The descriptor symbol uses the same name as the source level function in C.
The function entry point is analogous to the symbol we would generate for a
function in a non-descriptor-based ABI, except that it is renamed by
prepending a ".".
Which symbol gets referenced depends on the context:
* Taking the address of the function references the descriptor symbol.
* Calling the function references the entry point symbol.
(2) Speaking of implementation on AIX, for direct function call target, we
create proper MCSymbol SDNode(e.g . ".foo") while constructing SDAG to
replace original TargetGlobalAddress SDNode. Then down the path, we can
take advantage of this MCSymbol.
Patch by: Xiangling_L
Reviewed by: sfertile, hubert.reinterpretcast, jasonliu, syzaara
Differential Revision: https://reviews.llvm.org/D62532
llvm-svn: 362735
Summary:
This patch implements SDAG call lowering on AIX for functions
which only have parameters that could fit into GPRs.
Reviewers: hubert.reinterpretcast, syzaara
Differential Revision: https://reviews.llvm.org/D62823
llvm-svn: 362708
Summary:dd
This patch implements call lowering for calls without parameters
on AIX as initial support.
Reviewers: sfertile, hubert.reinterpretcast, aheejin, efriedma
Differential Revision: https://reviews.llvm.org/D61948
llvm-svn: 361669
The single-constant algorithm produces infinities on a lot of denormal values.
The precision of the two-constant algorithm is actually sufficient across the
range of denormals. We will switch to that algorithm for now to avoid the
infinities on denormals. In the future, we will re-evaluate the algorithm to
find the optimal one for PowerPC.
Differential revision: https://reviews.llvm.org/D60037
llvm-svn: 360144
A condition for exiting the legalization of v4i32 conversion to v2f64 through
extract/convert/build erroneously checks for the extract having type i32.
This is not adequate as smaller extracts are actually legalized to i32 as well.
Furthermore, an early exit is missing which means that we only check that
both extracts are from the same vector if that check fails.
As a result, both cases in the included test case fail - the first gets a
select error and the second generates incorrect code.
The culprit commit is r274535.
llvm-svn: 360043
Summary:
Based on the Eli Friedman's comments in https://reviews.llvm.org/D60811 , we'd better return early if the element type is not byte-sized in `combineBVOfConsecutiveLoads`.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D61076
llvm-svn: 359764
The MachineFunction wasn't used in getOptimalMemOpType, but more importantly,
this allows reuse of findOptimalMemOpLowering that is calling getOptimalMemOpType.
This is the groundwork for the changes in D59766 and D59787, that allows
implementation of TTI::getMemcpyCost.
Differential Revision: https://reviews.llvm.org/D59785
llvm-svn: 359537
Change the PPCISelLowering.cpp function that decides to avoid update form in
favor of partial vector loads to know about newer load types and to not be
confused by the chain operand.
Differential Revision: https://reviews.llvm.org/D60102
llvm-svn: 359504
Using initial-exec TLS variables is a reasonable performance
optimisation for system libraries. Use the correct PIC mechanism to get
hold of the GOT to avoid text relocations.
Differential Revision: https://reviews.llvm.org/D61026
llvm-svn: 359146
Summary:
This issue from the bugzilla: https://bugs.llvm.org/show_bug.cgi?id=41177
When the two operands for BUILD_VECTOR are same, we will get assert error.
llvm::SDValue combineBVOfConsecutiveLoads(llvm::SDNode*, llvm::SelectionDAG&):
Assertion `!(InputsAreConsecutiveLoads && InputsAreReverseConsecutive) &&
"The loads cannot be both consecutive and reverse consecutive."' failed.
This error caused by the wrong ElemSIze when calling isConsecutiveLS(). We
should use `getScalarType().getStoreSize();` to get the ElemSize instread of
`getScalarSizeInBits() / 8`.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D60811
llvm-svn: 358644
Summary:
PowerPC64/PowerPC64le supports the builtin function __builtin_setrnd to set the floating point rounding mode. This function will use the least significant two bits of integer argument to set the floating point rounding mode.
double __builtin_setrnd(int mode);
The effective values for mode are:
0 - round to nearest
1 - round to zero
2 - round to +infinity
3 - round to -infinity
Note that the mode argument will modulo 4, so if the int argument is greater than 3, it will only use the least significant two bits of the mode. Namely, builtin_setrnd(102)) is equal to builtin_setrnd(2).
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D59405
llvm-svn: 357241
A shift and add/sub sequence combination is faster in place of a multiply by constant.
Because the cycle or latency of multiply is not huge, we only consider such following
worthy patterns.
```
(mul x, 2^N + 1) => (add (shl x, N), x)
(mul x, -(2^N + 1)) => -(add (shl x, N), x)
(mul x, 2^N - 1) => (sub (shl x, N), x)
(mul x, -(2^N - 1)) => (sub x, (shl x, N))
```
And the cycles or latency is subtarget-dependent so that we need consider the
subtarget to determine to do or not do such transformation.
Also data type is considered for different cycles or latency to do multiply.
Differential Revision: https://reviews.llvm.org/D58950
llvm-svn: 357233
These changes are related to PR37743 and include:
SelectionDAGBuilder::visitSelect handles the unary SelectPatternFlavor::SPF_ABS case to build ABS node.
Delete the redundant recognizer of the integer ABS pattern from the DAGCombiner.
Add promoting the integer ABS node in the LegalizeIntegerType.
Expand-based legalization of integer result for the ABS nodes.
Expand-based legalization of ABS vector operations.
Add some integer abs testcases for different typesizes for Thumb arch
Add the custom ABS expanding and change the SAD pattern recognizer for X86 arch: The i64 result of the ABS is expanded to:
tmp = (SRA, Hi, 31)
Lo = (UADDO tmp, Lo)
Hi = (XOR tmp, (ADDCARRY tmp, hi, Lo:1))
Lo = (XOR tmp, Lo)
The "detectZextAbsDiff" function is changed for the recognition of pattern with the ABS node. Given a ABS node, detect the following pattern:
(ABS (SUB (ZERO_EXTEND a), (ZERO_EXTEND b))).
Change integer abs testcases for codegen with the ABS node support for AArch64.
Indicate that the ABS is legal for the i64 type when the NEON is supported.
Change the integer abs testcases to show changing of codegen.
Add combine and legalization of ABS nodes for Thumb arch.
Extend 'matchSelectPattern' to recognize the ABS patterns with ICMP_SGE condition.
For discussion, see https://bugs.llvm.org/show_bug.cgi?id=37743
Patch by: @ikulagin (Ivan Kulagin)
Differential Revision: https://reviews.llvm.org/D49837
llvm-svn: 356468
This allows better code size for aarch64 floating point materialization
in a future patch.
Reviewers: evandro
Differential Revision: https://reviews.llvm.org/D58690
llvm-svn: 356389
The PowerPC code generator currently scalarizes vector truncates that would fit in a vector register, resulting in vector extracts, scalar operations, and vector merges. This patch custom lowers a vector truncate that would fit in a register to a vector shuffle instead.
Differential Revision: https://reviews.llvm.org/D56507
llvm-svn: 353724
Move the CC analysis implementation to its own .cpp file instead of
duplicating it and artificually using functions in PPCISelLowering.cpp
and PPCFastISel.cpp. Follow-up to the same change done for X86, ARM, and
AArch64.
llvm-svn: 352444
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
For SDAG, we pretend patchpoints aren't special at all until we emit the code for the pseudo.
Then the verifier runs and it seems like we have a use of an undefined register (the register will
be reserved later, but the verifier doesn't know that).
So this patch call setUsesTOCBasePtr before emit the code for the pseudo, so verifier can know
X2 is a reserved register.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D56148
llvm-svn: 350165
A recent patch has added custom legalization of vector conversions of
v2i16 -> v2f64. This just rounds it out for other types where the input vector
has an illegal (narrower) type than the result vector. Specifically, this will
handle the following conversions:
v2i8 -> v2f64
v4i8 -> v4f32
v4i16 -> v4f32
Differential revision: https://reviews.llvm.org/D54663
llvm-svn: 350155
For atomic value operand which less than 4 bytes need to be masked.
And the related operation to calculate the newvalue can be done in 32 bit gprc.
So just use gprc for mask and value calculation.
Differential Revision: https://reviews.llvm.org/D56077
llvm-svn: 350113
Summary:
This patch is to fix the bug imported by rL341634.
In above submit , the the return type of ISD::ADDE is
14224: SDVTList VTs = DAG.getVTList(MVT::i64, MVT::i64),
but in fact, the second return type of ISD::ADDE should be
MVT::Glue not MVT::i64.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D55977
llvm-svn: 350061
For type v4i32/v8ii16/v16i8, do following transforms:
(vselect (setcc a, b, setugt), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setuge), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setult), (sub b, a), (sub a, b)) -> (vabsd a, b)
(vselect (setcc a, b, setule), (sub b, a), (sub a, b)) -> (vabsd a, b)
Differential Revision: https://reviews.llvm.org/D55812
llvm-svn: 349599
Improve the current vec_abs support on P9, generate ISD::ABS node for vector types,
combine ABS node to VABSD node for some special cases to make use of P9 VABSD* insns,
do custom lowering to vsub(vneg later)+vmax if it has no combination opportunity.
Differential Revision: https://reviews.llvm.org/D54783
llvm-svn: 349437
In theory, we should let the PPC target to determine how to lower the TOC Entry for globals.
And the PPCTargetLowering requires this query to do some optimization for TOC_Entry.
Differential Revision: https://reviews.llvm.org/D54925
llvm-svn: 348108
We have efficient codegen on P9 for lowering bswap that involves moving
the value into a vector reg and moving it back. However, the check under
which we custom lowered it did not adequately reflect the actual requirements.
It required only that the subtarget be an implementation of ISA 3.0 since all
compliant implementations have to provide the vector instructions.
However, the kernel builds have a valid use case for -mno-altivec -mcpu=pwr9
(i.e. don't emit vector code, don't have to save vector regs for context
switch). So we should require the correct features for this lowering.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39334
llvm-svn: 347376
Turns out that there was no check for a store that truncates down
to a single byte when combining a (store (bswap...)) into a byte-swapping
store. This patch just adds that check.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39478.
llvm-svn: 347288
To make ISD::VSELECT available(legal) so long as there are altivec instruction, otherwise it's default behavior is expanding,
which is legalized at type-legalization phase. Use xxsel to match vselect if vsx is open, or use vsel.
Differential Revision: https://reviews.llvm.org/D49531
llvm-svn: 346824
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
Jason Liu