Summary:
If the .symtab section is stripped from the binary it might be that
there's a .gnu_debugdata section which contains a smaller .symtab in
order to provide enough information to create a backtrace with function
names or to set and hit a breakpoint on a function name.
This change looks for a .gnu_debugdata section in the ELF object file.
The .gnu_debugdata section contains a xz-compressed ELF file with a
.symtab section inside. Symbols from that compressed .symtab section
are merged with the main object file's .dynsym symbols (if any).
In addition we always load the .dynsym even if there's a .symtab
section.
For example, the Fedora and RHEL operating systems strip their binaries
but keep a .gnu_debugdata section. While gdb already can read this
section, LLDB until this patch couldn't. To test this patch on a
Fedora or RHEL operating system, try to set a breakpoint on the "help"
symbol in the "zip" binary. Before this patch, only GDB can set this
breakpoint; now LLDB also can do so without installing extra debug
symbols:
lldb /usr/bin/zip -b -o "b help" -o "r" -o "bt" -- -h
The above line runs LLDB in batch mode and on the "/usr/bin/zip -h"
target:
(lldb) target create "/usr/bin/zip"
Current executable set to '/usr/bin/zip' (x86_64).
(lldb) settings set -- target.run-args "-h"
Before the program starts, we set a breakpoint on the "help" symbol:
(lldb) b help
Breakpoint 1: where = zip`help, address = 0x00000000004093b0
Once the program is run and has hit the breakpoint we ask for a
backtrace:
(lldb) r
Process 10073 stopped
* thread #1, name = 'zip', stop reason = breakpoint 1.1
frame #0: 0x00000000004093b0 zip`help
zip`help:
-> 0x4093b0 <+0>: pushq %r12
0x4093b2 <+2>: movq 0x2af5f(%rip), %rsi ; + 4056
0x4093b9 <+9>: movl $0x1, %edi
0x4093be <+14>: xorl %eax, %eax
Process 10073 launched: '/usr/bin/zip' (x86_64)
(lldb) bt
* thread #1, name = 'zip', stop reason = breakpoint 1.1
* frame #0: 0x00000000004093b0 zip`help
frame #1: 0x0000000000403970 zip`main + 3248
frame #2: 0x00007ffff7d8bf33 libc.so.6`__libc_start_main + 243
frame #3: 0x0000000000408cee zip`_start + 46
In order to support the .gnu_debugdata section, one has to have LZMA
development headers installed. The CMake section, that controls this
part looks for the LZMA headers and enables .gnu_debugdata support by
default if they are found; otherwise or if explicitly requested, the
minidebuginfo support is disabled.
GDB supports the "mini debuginfo" section .gnu_debugdata since v7.6
(2013).
Reviewers: espindola, labath, jankratochvil, alexshap
Reviewed By: labath
Subscribers: rnkovacs, wuzish, shafik, emaste, mgorny, arichardson, hiraditya, MaskRay, lldb-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D66791
llvm-svn: 373891
The utility library shouldn't depend on curses, libedit or python. Move
curses to core, libedit to host and python to the python plugin.
Differential revision: https://reviews.llvm.org/D59970
llvm-svn: 357287
There are set of classes in Target that describe the parameters of a
process - e.g. it's PID, name, user id, and similar. However, since it
is a bare description of a process and contains no actual functionality,
there's nothing specifically that makes this appropriate for being in
Target -- it could just as well be describing a process on the host, or
some hypothetical virtual process that doesn't even exist.
To cement this, I'm moving these classes to Utility. It's possible that
we can find a better place for it in the future, but as it is neither
Host specific nor Target specific, Utility seems like the most appropriate
place for the time being.
After this there is only 2 remaining references to Target from Host,
which I'll address in a followup.
Differential Revision: https://reviews.llvm.org/D58842
llvm-svn: 355342
Given that we have a target named Symbols, one wonders why a
file named Symbols.cpp is not in this target. To be clear,
the functions exposed from this file are really focused on
*locating* a symbol file on a given host, which is where the
ambiguity comes in. However, it makes more sense conceptually
to be in the Symbols target. While some of the specific places
to search for symbol files might change depending on the Host,
this is not inherently true in the same way that, for example,
"accessing the file system" or "starting threads" is
fundamentally dependent on the Host.
PDBs, for example, recently became a reality on non-Windows platforms,
and it's theoretically possible that DSYMs could become a thing on non
MacOSX platforms (maybe in a remote debugging scenario). Other types of
symbol files, such as DWO, DWP, etc have never been tied to any Host
platform anyway.
After this patch, there is only one remaining dependency from
Host to Target.
Differential Revision: https://reviews.llvm.org/D58730
llvm-svn: 355032
Summary:
These classes describe the details of the process we are about to
launch, and so they are naturally used by the launching code in the Host
module. Previously they were present in Target because that is the most
important (but by far not the only) user of the launching code.
Since the launching code has other customers, must of which do not care
about Targets, it makes sense to move these classes to the Host layer,
next to the launching code.
This move reduces the number of times that Target is included from host
to 8 (it used to be 14).
Reviewers: zturner, clayborg, jingham, davide, teemperor
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D56602
llvm-svn: 353047
Summary:
A fairly simple operation as setting a breakpoint (writing a breakpoint
opcode) at a given address was going through three classes:
NativeProcessProtocol which called NativeBreakpointList, which then
called SoftwareBrekpoint, only to end up again in NativeProcessProtocol
to do the actual writing itself. This is unnecessarily complex and can
be simplified by moving all of the logic into NativeProcessProtocol
class itself, removing a lot of boilerplate.
One of the reeasons for this complexity was that (it seems)
NativeBreakpointList class was meant to hold both software and hardware
breakpoints. However, that never materialized, and hardware breakpoints
are stored in a separate map holding only hardware breakpoints.
Essentially, this patch makes software breakpoints follow that approach
by replacing the heavy SoftwareBraekpoint with a light struct of the
same name, which holds only the data necessary to describe one
breakpoint. The rest of the logic is in the main class. As, at the
lldb-server level, handling software and hardware breakpoints is very
different, this seems like a reasonable state of things.
Reviewers: krytarowski, zturner, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D52941
llvm-svn: 346093
Summary:
The only reason python was used in the Host module was to compute the
python path. I resolve this the same way as D47384 did for clang, by
moving the path computation into the python plugin and modifying
SBHostOS class to call into this module for ePathTypePythonDir.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D48215
llvm-svn: 335104
Summary:
This patch adds a modulemap which allows compiling the lldb headers into C++ modules
(for example in builds with LLVM_ENABLE_MODULES=On).
Even though most of the affected code has been cleaned up to work with the more strict
C++ module semantics, there are still some workarounds left in the current modulemap
(the most obvious one is the big `lldb` wrapper module).
It also moves the Obj-C++ files in lldb to their own subdirectories. This was necessary
because we need to filter out the modules flags for this code.
Note: With the latest clang and libstdc++ it seems necessary to have a STL C++ module
to get a working LLVM_ENABLE_MODULES build for lldb. Otherwise clang will falsely
detect ODR violations in the textually included STL code inside the lldb modules.
Reviewers: aprantl, bruno
Reviewed By: aprantl, bruno
Subscribers: mgorny, yamaguchi, v.g.vassilev, lldb-commits
Differential Revision: https://reviews.llvm.org/D47929
llvm-svn: 334611
Summary:
The Args class is used in plenty of places besides the command
interpreter (e.g., anything requiring an argc+argv combo, such as when
launching a process), so it needs to be in a lower layer. Now that the
class has no external dependencies, it can be moved down to the Utility
module.
This removes the last (direct) dependency from the Host module to
Interpreter, so I remove the Interpreter module from Host's dependency
list.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D45480
llvm-svn: 330200
Summary:
The ObjectFile class was used to determine the architecture of a running
process by inspecting it's main executable. There were two issues with
this:
- it's in the wrong layer
- the call can be very expensive (it can end up computing the crc of the
whole file).
Since the process is running on the host, ideally we would be able to
just query the data straight from the OS like darwin does, but there
doesn't seem to be a reasonable way to do that. So, this fixes the
layering issue by using the llvm object library to inspect the file.
Since we know the process is already running on the host, we just need
to peek at a few bytes of the elf header to determine whether it's 32-
or 64-bit (which should make this faster as well).
Pretty much the same logic was implemented in
NativeProcessProtocol::ResolveProcessArchitecture, so I delete this
logic and replace calls with GetProcessInfo.
Reviewers: eugene, krytarowski
Subscribers: mgorny, hintonda, lldb-commits
Differential Revision: https://reviews.llvm.org/D42488
llvm-svn: 323637
Summary:
This allows for the stack size to be configured, which isn't
possible with std::thread. Prevents overflowing the stack when
performing complex operations in the task pool on darwin,
where the default pthread stack size is only 512kb.
This also moves TaskPool from Utility to Host.
Reviewers: labath, tberghammer, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D37930
llvm-svn: 313637
Add explicit linkage to the necessary system libraries in the Host
library. Otherwise, the library fails to build with -Wl,--as-needed.
The system libraries ended up being listed on the linker command-line
before the static libraries needing them, resulting in --as-needed
stripping them.
Listing the dependent libraries explicitly is the canonical way of
declaring libraries in CMake. It guarantees that the system library
dependencies will be correctly propagated to reverse dependencies.
The code used to link libraries reuses existing EXTRA_LIBS variable,
copying code from other parts of LLDB. We might eventually remove
the direct use of system libraries in the programs; however, I would
prefer if we focused on fixing the build regressions in 5.0 branch
first, and went further after the release.
Differential Revision: https://reviews.llvm.org/D36885
llvm-svn: 311354
Summary:
These interfaces have no dependencies, so it makes sense for them to be
in the lowest level modules, to make sure that other parts of the
codebase can use them without introducing loops.
The only exception here is the Connection::CreateDefaultConnection
method, which I've moved to Host, as it instantiates concrete
implementations, and that's where the implementations live.
Reviewers: jingham, zturner
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D34400
llvm-svn: 306391
Summary:
ProcessLauncherPosix was using posix_spawn for launching the process,
but this function is not available on all platforms we support, and even
where it was avaialable, it did not support the full range of options we
require for launching (most importantly, launching in stop-on-entry
mode). For these reasons, the set of ifdefs around these functions has
grown untractably large, and we were forced to implement our own
launcher from more basic primitives anyway (ProcessLauncherPosixFork --
used on Linux, Android, and NetBSD).
Therefore, I remove this class, and move the relevant parts of the code
to the darwin-specific Host.mm file. This is the platform that code was
originally written for anyway, and it's the only platform where this
implementation makes sense (e.g. the lack of the "thread-specific
working directory" concept makes these functions racy on all other
platforms). This allows us to remove a lot of ifdefs and simplify the
code.
Effectively, the only change this introduces is that FreeBSD will now
use the fork-based launcher instead of posix_spawnp. That sholdn't be a
problem as this approach works at least on one other BSD-based system
already.
Reviewers: krytarowski, emaste, jingham
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34236
llvm-svn: 305686
This support was landed in r300579, and reverted in r300669 due to failures on the bots.
The failures were caused by sockets not being properly closed, and this updated version of the patches should resolve that.
Summary from the original change:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
https://reviews.llvm.org/D31823
llvm-svn: 301492
The break the linux bots (and probably any other machine which would
run the test suite in a massively parallel way). The problem is that it
can happen that we only successfully create an IPv6 listening socket
(because the relevant IPv4 port is used by another process) and then the
connecting side attempts to connect to the IPv4 port and fails.
It's not very obvious how to fix this problem, so I am reverting this
until we come up with a solution.
llvm-svn: 300669
Summary:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
Reviewers: zturner, clayborg
Subscribers: jasonmolenda, labath, lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D31823
llvm-svn: 300579
Summary:
Add basic OpenBSD support. This is enough to be able to analyze core dumps for OpenBSD/amd64, OpenBSD/arm, OpenBSD/arm64 and OpenBSD/i386.
Note that part of the changes to source/Plugins/ObjectFile/ELF/ObjectFileELF.cpp fix a bug that probably affects other platforms as well. The GetProgramHeaderByIndex() interface use 1-based indices, but in some case when looping over the headers the, the loop starts at 0 and misses the last header. This caused problems on OpenBSD since OpenBSD core dumps have the PT_NOTE segment as the last program header.
Reviewers: joerg, labath, krytarowski
Reviewed By: krytarowski
Subscribers: aemerson, emaste, rengolin, srhines, krytarowski, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D31131
llvm-svn: 298810
There are only two users of NativeRegisterContextRegisterInfo,
and both are in process plugins. Moving this code from Host
to Plugins/Process/Utility thus makes sense, and as it is the
only dependency from Host -> PluginProcessUtility, it also
breaks this cycle, reducing LLDB's overall cycle count from
45 to 44.
llvm-svn: 298466
Summary:
GetAuxvData was causing dependencies from host to target and linux
process modules. It also does not fit netbsd use case, as there we can
only read the auxiliary vector with ptrace, which is better done in the
process plugin, with the other ptrace calls.
I resolve these issues by moving the freebsd and linux versions into the
relevant process plugins. In case of linux, this required adding an
interface in NativeProcessProtocol. The empty definitions on other
platforms can simply be removed.
To get the code compiling I had to add ProcessGdbRemote -> ProcessLinux
dependency, which was not caught before because we depended on it
transitively.
Reviewers: zturner, emaste
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D31031
llvm-svn: 298066
Summary:
These classes existed only because of the GetName() static function,
which can be moved to a more natural place anyway. I move the linux
version to NativeProcessLinux (and get rid of ProcFileReader), the
freebsd version to ProcessFreeBSD (and fix a bug where it was using the
current process ID, instead of the inferior pid), and remove the NetBSD
version (which was probably incorrect anyway, as it assumes the current
process instead of the inferior.
I also add an llgs test to that verifies thread names are read
correctly.
Reviewers: zturner, krytarowski, emaste
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30981
llvm-svn: 298058
Summary:
ProcFileReader is the cause of the dependency from Host to ProcessLinux
module. Since it's interface is also obsolete (ReadIntoDataBuffer is
trivially replaceable by llvm::MemoryBuffer functions and
ProcessLineByLine is trivially implementable with StringRefs), instead
of moving it around I'm planning to obliterate it. This is the first
step, where I remove a couple of occurences in linux/Host.cpp, and
modernize some code around that.
I have introduced linux/Support.h, which holds two utility functions
now, whose resposibility is to construct the appropriate proc file names
-- the only useful feature of ProcFileReader.
I add a couple of tests for these functions, and for
Host::GetProcessInfo. It's worth noting that these are the first
host-specific unit tests in lldb.
Reviewers: zturner, eugene
Subscribers: srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30942
llvm-svn: 297843
Summary:
Use ProcessLauncherPosixFork in Linux and NetBSD.
Changes to ProcessLauncherLinux:
- Limit personality.h and ASLR code to Linux.
- Reuse portable ptrace(2) PT_TRACE_ME operation available on Linux and BSDs.
- Limit ETXTBSY error path from execve(2) to Linux.
- In LaunchProcess declaration change virtual to override.
This code should be readily available for FreeBSD.
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, clayborg, labath, emaste
Reviewed By: labath
Subscribers: danalbert, srhines, mgorny, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29347
llvm-svn: 293768
Summary:
This patch adds accurate dependency specifications to the mail LLDB libraries and tools.
In all cases except lldb-server, these dependencies are added in addition to existing dependencies (making this low risk), and I performed some code cleanup along the way.
For lldb-server I've cleaned up the LLVM dependencies down to just the minimum actually required. This is more than lldb-server actually directly references, and I've left a todo in the code to clean that up.
Reviewers: labath, zturner
Subscribers: lldb-commits, danalbert, srhines, ki.stfu, mgorny, jgosnell
Differential Revision: https://reviews.llvm.org/D29333
llvm-svn: 293686
Summary:
The NDK cmake toolchain file defines CMAKE_SYSTEM_NAME=Android, so switch the
build to use that. I have also updated the in-tree toolchain file to do that
(instead of defining __ANDROID_NDK__), so it can still be used to build.
After migrating the last bits of non-toolchainy bits out of the in-tree
toolchain, I intend to delete it.
Reviewers: tberghammer, danalbert
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D28775
llvm-svn: 292212
Summary:
All usages have been replaced by appropriate std::chrono funcionality, and the
class is now unused. The only used part of the cpp file is the DumpTimePoint
function, which I have moved into the only caller (CommandObjectTarget.cpp).
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D26451
llvm-svn: 287096
Summary:
This is supposed to find the python lib dir and seems like it's just
been copied twice by mistake.
Reviewers: tfiala
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D22891
llvm-svn: 277060
This finally removes the use of the Mutex and Condition classes. This is an
intricate patch as the Mutex and Condition classes were tied together.
Furthermore, many places had slightly differing uses of time values. Convert
timeout values to relative everywhere to permit the use of
std::chrono::duration, which is required for the use of
std::condition_variable's timeout. Adjust all Condition and related Mutex
classes over to std::{,recursive_}mutex and std::condition_variable.
This change primarily comes at the cost of breaking the TracingMutex which was
based around the Mutex class. It would be possible to write a wrapper to
provide similar functionality, but that is beyond the scope of this change.
llvm-svn: 277011
Summary:
We've had two copies of code for launching processes:
- one in NativeProcessLinux, used for launching debugged processes
- one in ProcessLauncherAndroid, used on android for launching all other kinds of processes
These have over time acquired support for various launch options, but neither supported all of
them. I now replace them with a single implementation ProcessLauncherLinux, which supports all
the options the individual versions supported and set it to be used to launch all processes on
linux.
This also works around the ETXTBSY issue on android when the process is started from the platform
instance, as that used to go through the version which did not contain the workaround.
Reviewers: tberghammer
Subscribers: tberghammer, danalbert, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D22457
llvm-svn: 276288
These are two simple tests that make sure single line and
multiline content are processed and received by Editline.cpp.
Fancier tests to come...
llvm-svn: 251681
Summary:
These changes aren't everything what is needed for the CMake target, but it's significantly approaching it.
These changes shouldn't effect the build process on other platforms.
Patch by Kamil Rytarowski, thanks!
Reviewers: joerg, brucem
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13711
llvm-svn: 251164
Summary:
GetOptInc provides getopt(), getopt_long() and getopt_long_only().
Windows (for defined(_MSC_VER)) doesn't ship with all of the getopt(3) family members and needs all of them. NetBSD requires only getopt_long_only(3).
While there fix the code for clang diagnostics.
Author: Kamil Rytarowski
Reviewers: joerg
Subscribers: labath, zturner, lldb-commits
Differential Revision: http://reviews.llvm.org/D12582
llvm-svn: 246843
Summary:
This is the first part of our effort to make llgs single threaded. Currently, llgs consists of
about three threads and the synchronisation between them is a major source of latency when
debugging linux and android applications.
In order to be able to go single threaded, we must have the ability to listen for events from
multiple sources (primarily, client commands coming over the network and debug events from the
inferior) and perform necessary actions. For this reason I introduce the concept of a MainLoop.
A main loop has the ability to register callback's which will be invoked upon receipt of certain
events. MainLoopPosix has the ability to listen for file descriptors and signals.
For the moment, I have merely made the GDBRemoteCommunicationServerLLGS class use MainLoop
instead of waiting on the network socket directly, but the other threads still remain. In the
followup patches I indend to migrate NativeProcessLinux to this class and remove the remaining
threads.
Reviewers: ovyalov, clayborg, amccarth, zturner, emaste
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11066
llvm-svn: 242018
Summary:
Some old linux versions do not have process_vm_readv function defined. Even older versions do not
have even the __NR_process_vm_readv syscall number. We use cmake to detect these situations and
fallback appropriately: in the first case, we can issue the syscall manually, while it the latter
case, we need to drop fast memory read support completely.
Test Plan: linux test suite passes
Reviewers: ovyalov, Eugene.Zelenko
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D10727
llvm-svn: 240927
Adrian Prantl