a missing include from CLog.h.
CLog.h referenced most of the core libclang types but never directly
included Index.h that provides them. Previously it got lucky and other
headers were always included first but with the sorting it ended up
first in one case and stopped compiling. Adding the Index.h include
fixes it right up.
llvm-svn: 202810
encodes the canonical rules for LLVM's style. I noticed this had drifted
quite a bit when cleaning up LLVM, so wanted to clean up Clang as well.
llvm-svn: 198686
This backs out changes in commit r198605 and part of r198604, replacing the
original tok::kw_template with a slightly more obvious placeholder
tok::unknown.
llvm-svn: 198666
Remove UnaryTypeTraitExpr and switch all remaining type trait related handling
over to TypeTraitExpr.
The UTT/BTT/TT enum prefix and evaluation code is retained pending further
cleanup.
This is part of the ongoing work to unify type traits following the removal of
BinaryTypeTraitExpr in r197273.
llvm-svn: 198271
1) Teach ExpectAndConsume() to emit expected and expected-after diagnostics
using the generic diagnostic descriptions added in r197972, eliminating another
set of trivial err_expected_* variations while maintaining existing behaviour.
2) Lift SkipUntil() recovery out of ExpectAndConsume(). The Expect/Consume
family of functions are primitive parser operations that now have the
well-defined property of operating on single tokens. Factoring out recovery
exposes opportunities for more consistent and tailored error recover at the
call sites instead of just relying on a bottled SkipUntil formula.
llvm-svn: 198270
Introduce proper facilities to render token spellings using the diagnostic
formatter.
Replaces most of the hard-coded diagnostic messages related to expected tokens,
which all shared the same semantics but had to be multiply defined due to
variations in token order or quote marks.
The associated parser changes are largely mechanical but they expose
commonality in whole chunks of the parser that can now be factored away.
This commit uses C++11 typed enums along with a speculative legacy fallback
until the transition is complete.
Requires corresponding changes in LLVM r197895.
llvm-svn: 197972
1) Introduce TryConsumeToken() to handle the common test-and-consume pattern.
This brings about readability improvements in the parser and optimizes to avoid
redundant checks in the common case.
2) Eliminate the ConsumeCodeCompletionTok special case from ConsumeToken(). This
was used by only one caller which has been switched over to the more
appropriate ConsumeCodeCompletionToken() function.
llvm-svn: 197497
There's nothing special about type traits accepting two arguments.
This commit eliminates BinaryTypeTraitExpr and switches all related handling
over to TypeTraitExpr.
Also fixes a CodeGen failure with variadic type traits appearing in a
non-constant expression.
The BTT/TT prefix and evaluation code is retained as-is for now but will soon
be further cleaned up.
This is part of the ongoing work to unify type traits.
llvm-svn: 197273
Type trait parsing is all over the place at the moment with unary, binary and
n-ary C++11 type traits that were developed independently at different points
in clang's history.
There's no good reason to handle them separately -- there are three parsers,
three AST nodes and lots of duplicated handling code with slightly different
implementations and diags for each kind.
This commit unifies parsing of type traits and sets the stage for further
consolidation.
No change in behaviour other than more consistent error recovery.
llvm-svn: 197179
For an init capture, process the initialization expression
right away. For lambda init-captures such as the following:
const int x = 10;
auto L = [i = x+1](int a) {
return [j = x+2,
&k = x](char b) { };
};
keep in mind that each lambda init-capture has to have:
- its initialization expression executed in the context
of the enclosing/parent decl-context.
- but the variable itself has to be 'injected' into the
decl-context of its lambda's call-operator (which has
not yet been created).
Each init-expression is a full-expression that has to get
Sema-analyzed (for capturing etc.) before its lambda's
call-operator's decl-context, scope & scopeinfo are pushed on their
respective stacks. Thus if any variable is odr-used in the init-capture
it will correctly get captured in the enclosing lambda, if one exists.
The init-variables above are created later once the lambdascope and
call-operators decl-context is pushed onto its respective stack.
Since the lambda init-capture's initializer expression occurs in the
context of the enclosing function or lambda, therefore we can not wait
till a lambda scope has been pushed on before deciding whether the
variable needs to be captured. We also need to process all
lvalue-to-rvalue conversions and discarded-value conversions,
so that we can avoid capturing certain constant variables.
For e.g.,
void test() {
const int x = 10;
auto L = [&z = x](char a) { <-- don't capture by the current lambda
return [y = x](int i) { <-- don't capture by enclosing lambda
return y;
}
};
If x was not const, the second use would require 'L' to capture, and
that would be an error.
Make sure TranformLambdaExpr is also aware of this.
Patch approved by Richard (Thanks!!)
http://llvm-reviews.chandlerc.com/D2092
llvm-svn: 196454
nested-name-specifier, rather than crashing. (In fact, reject all
literal-operator-ids that have a non-namespace nested-name-specifier). The
grammar doesn't allow these in some cases, and in other cases does allow them
but instantiation will always fail.
llvm-svn: 196443
Summary: Some MS headers use these features.
Reviewers: rnk, rsmith
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1948
llvm-svn: 192936
Specifically, the following features are not included in this commit:
- any sort of capturing within generic lambdas
- generic lambdas within template functions and nested
within other generic lambdas
- conversion operator for captureless lambdas
- ensuring all visitors are generic lambda aware
(Although I have gotten some useful feedback on my patches of the above and will be incorporating that as I submit those patches for commit)
As an example of what compiles through this commit:
template <class F1, class F2>
struct overload : F1, F2 {
using F1::operator();
using F2::operator();
overload(F1 f1, F2 f2) : F1(f1), F2(f2) { }
};
auto Recursive = [](auto Self, auto h, auto ... rest) {
return 1 + Self(Self, rest...);
};
auto Base = [](auto Self, auto h) {
return 1;
};
overload<decltype(Base), decltype(Recursive)> O(Base, Recursive);
int num_params = O(O, 5, 3, "abc", 3.14, 'a');
Please see attached tests for more examples.
This patch has been reviewed by Doug and Richard. Minor changes (non-functionality affecting) have been made since both of them formally looked at it, but the changes involve removal of supernumerary return type deduction changes (since they are now redundant, with richard having committed a recent patch to address return type deduction for C++11 lambdas using C++14 semantics).
Some implementation notes:
- Add a new Declarator context => LambdaExprParameterContext to
clang::Declarator to allow the use of 'auto' in declaring generic
lambda parameters
- Add various helpers to CXXRecordDecl to facilitate identifying
and querying a closure class
- LambdaScopeInfo (which maintains the current lambda's Sema state)
was augmented to house the current depth of the template being
parsed (id est the Parser calls Sema::RecordParsingTemplateParameterDepth)
so that SemaType.cpp::ConvertDeclSpecToType may use it to immediately
generate a template-parameter-type when 'auto' is parsed in a generic
lambda parameter context. (i.e we do NOT use AutoType deduced to
a template parameter type - Richard seemed ok with this approach).
We encode that this template type was generated from an auto by simply
adding $auto to the name which can be used for better diagnostics if needed.
- SemaLambda.h was added to hold some common lambda utility
functions (this file is likely to grow ...)
- Teach Sema::ActOnStartOfFunctionDef to check whether it
is being called to instantiate a generic lambda's call
operator, and if so, push an appropriately prepared
LambdaScopeInfo object on the stack.
- various tests were added - but much more will be needed.
There is obviously more work to be done, and both Richard (weakly) and Doug (strongly)
have requested that LambdaExpr be removed form the CXXRecordDecl LambdaDefinitionaData
in a future patch which is forthcoming.
A greatful thanks to all reviewers including Eli Friedman, James Dennett,
and especially the two gracious wizards (Richard Smith and Doug Gregor)
who spent hours providing feedback (in person in Chicago and on the mailing lists).
And yet I am certain that I have allowed unidentified bugs to creep in; bugs, that I will do my best to slay, once identified!
Thanks!
llvm-svn: 191453
Specifically, the following features are not included in this commit:
- any sort of capturing within generic lambdas
- nested lambdas
- conversion operator for captureless lambdas
- ensuring all visitors are generic lambda aware
As an example of what compiles:
template <class F1, class F2>
struct overload : F1, F2 {
using F1::operator();
using F2::operator();
overload(F1 f1, F2 f2) : F1(f1), F2(f2) { }
};
auto Recursive = [](auto Self, auto h, auto ... rest) {
return 1 + Self(Self, rest...);
};
auto Base = [](auto Self, auto h) {
return 1;
};
overload<decltype(Base), decltype(Recursive)> O(Base, Recursive);
int num_params = O(O, 5, 3, "abc", 3.14, 'a');
Please see attached tests for more examples.
Some implementation notes:
- Add a new Declarator context => LambdaExprParameterContext to
clang::Declarator to allow the use of 'auto' in declaring generic
lambda parameters
- Augment AutoType's constructor (similar to how variadic
template-type-parameters ala TemplateTypeParmDecl are implemented) to
accept an IsParameterPack to encode a generic lambda parameter pack.
- Add various helpers to CXXRecordDecl to facilitate identifying
and querying a closure class
- LambdaScopeInfo (which maintains the current lambda's Sema state)
was augmented to house the current depth of the template being
parsed (id est the Parser calls Sema::RecordParsingTemplateParameterDepth)
so that Sema::ActOnLambdaAutoParameter may use it to create the
appropriate list of corresponding TemplateTypeParmDecl for each
auto parameter identified within the generic lambda (also stored
within the current LambdaScopeInfo). Additionally,
a TemplateParameterList data-member was added to hold the invented
TemplateParameterList AST node which will be much more useful
once we teach TreeTransform how to transform generic lambdas.
- SemaLambda.h was added to hold some common lambda utility
functions (this file is likely to grow ...)
- Teach Sema::ActOnStartOfFunctionDef to check whether it
is being called to instantiate a generic lambda's call
operator, and if so, push an appropriately prepared
LambdaScopeInfo object on the stack.
- Teach Sema::ActOnStartOfLambdaDefinition to set the
return type of a lambda without a trailing return type
to 'auto' in C++1y mode, and teach the return type
deduction machinery in SemaStmt.cpp to process either
C++11 and C++14 lambda's correctly depending on the flag.
- various tests were added - but much more will be needed.
A greatful thanks to all reviewers including Eli Friedman,
James Dennett and the ever illuminating Richard Smith. And
yet I am certain that I have allowed unidentified bugs to creep in;
bugs, that I will do my best to slay, once identified!
Thanks!
llvm-svn: 188977
*that* easy...
Try a bit harder to disambiguate. This is mostly straightforward, but for
=-style initializers, we actually need to know where an expression ends:
[foo = bar baz]
is a message send, whereas
[foo = bar + baz]
is a lambda-introducer. Handle this by parsing the expression eagerly, and
replacing it with an annotation token. By chance, we use the *exact same*
parsing rules in both cases (except that we need to assume we're inside a
message send for the parse, to turn off various forms of inapplicable
error recovery).
llvm-svn: 182432
a FieldDecl from it, and propagate both into the closure type and the
LambdaExpr.
You can't do much useful with them yet -- you can't use them within the body
of the lambda, because we don't have a representation for "the this of the
lambda, not the this of the enclosing context". We also don't have support or a
representation for a nested capture of an init-capture yet, which was intended
to work despite not being allowed by the current standard wording.
llvm-svn: 181985
are now two distinct canonical 'AutoType's: one is the undeduced 'auto'
placeholder type, and the other is a deduced-but-dependent type. All
deduced-to-a-non-dependent-type cases are still non-canonical.
llvm-svn: 180789
This required plumbing through a new flag to determine whether a ParmVarDecl is
actually a parameter of a function declaration (as opposed to a function
typedef etc, where the attribute is prohibited). Weirdly, this attribute (just
like [[noreturn]]) cannot be applied to a function type, just to a function
declaration (and its parameters).
llvm-svn: 173726
uncovered.
This required manually correcting all of the incorrect main-module
headers I could find, and running the new llvm/utils/sort_includes.py
script over the files.
I also manually added quite a few missing headers that were uncovered by
shuffling the order or moving headers up to be main-module-headers.
llvm-svn: 169237
typeid (and a couple other non-standard places where we can transform an
unevaluated expression into an evaluated expression) is special
because it introduces an an expression evaluation context,
which conflicts with the mechanism to compute the current
lambda mangling context. PR12123.
I would appreciate if someone would double-check that we get the mangling
correct with this patch.
llvm-svn: 164658
nested names as id-expressions, using the annot_primary_expr annotation, where
possible. This removes some redundant lookups, and also allows us to
typo-correct within tentative parsing, and to carry on disambiguating past an
identifier which we can determine will fail lookup as both a type and as a
non-type, allowing us to disambiguate more declarations (and thus offer
improved error recovery for such cases).
This also introduces to the parser the notion of a tentatively-declared name,
which is an identifier which we *might* have seen a declaration for in a
tentative parse (but only if we end up disambiguating the tokens as a
declaration). This is necessary to correctly disambiguate cases where a
variable is used within its own initializer.
llvm-svn: 162159
lambda-introducer in Objective-C++11, fall back to treating the tokens
as an Objective-C message send to provide those (more likely)
completions. Fixes <rdar://problem/11980263>.
llvm-svn: 161015
accurate by asking the parser whether there was an ambiguity rather than trying
to reverse-engineer it from the DeclSpec. Make the with-parameters case have
better diagnostics by using semantic information to drive the warning,
improving the diagnostics and adding a fixit.
Patch by Nikola Smiljanic. Some minor changes by me to suppress diagnostics for
declarations of the form 'T (*x)(...)', which seem to have a very high false
positive rate, and to reduce indentation in 'warnAboutAmbiguousFunction'.
llvm-svn: 160998
attributes in more places where we didn't and catching a lot more issues.
This implements nearly every aspect of C++11 attribute parsing, except for:
- Attributes are permitted on explicit instantiations inside the declarator
(but not preceding the decl-spec)
- Attributes are permitted on friend declarations of functions.
- Multiple instances of the same attribute in an attribute-list (e.g.
[[noreturn, noreturn]], not [[noreturn]] [[noreturn]] which is conforming)
are allowed.
The first two are marked as expected-FIXME in the test file and the latter
is probably a defect and is currently untested.
Thanks to Richard Smith for providing the lion's share of the testcases.
llvm-svn: 159072
also deal with '>>>' (in CUDA), '>=', and '>>='. Fix the FixItHints logic to
deal with cases where the token is followed by an adjacent '=', '==', '>=',
'>>=', or '>>>' token, where a naive fix-it would result in a differing token
stream on a re-lex.
llvm-svn: 158652
refactorings in that revision, and some of the subsequent bugfixes, which
seem to be relevant even without delayed exception specification parsing.
llvm-svn: 156031
exception specifications on member functions until after the closing
'}' for the containing class. This allows, for example, a member
function to throw an instance of its own class. Fixes PR12564 and a
fairly embarassing oversight in our C++98/03 support.
llvm-svn: 154844
in the declaration of a non-static member function after the
(optional) cv-qualifier-seq, which in practice means in the exception
specification and late-specified return type.
The new scheme here used to manage 'this' outside of a member function
scope is more general than the Scope-based mechanism previously used
for non-static data member initializers and late-parsesd attributes,
because it can also handle the cv-qualifiers on the member
function. Note, however, that a separate pass is required for static
member functions to determine whether 'this' was used, because we
might not know that we have a static function until after declaration
matching.
Finally, this introduces name mangling for 'this' and for the implicit
'this', which is intended to match GCC's mangling. Independent
verification for the new mangling test case would be appreciated.
Fixes PR10036 and PR12450.
llvm-svn: 154799
Instead, make it the allocation function's responsibility to add them
to a list and clear it when a top-level decl is finished.
This plugs leakage of TemplateAnnotationIds. DelayedCleanupPool is
ugly and unused, remove it.
llvm-svn: 154743
* In C++11, '[[' is ill-formed unless it starts an attribute-specifier. Reject
array sizes and array indexes which begin with a lambda-expression. Recover by
parsing the lambda as a lambda.
* In Objective-C++11, either '[' could be the start of a message-send.
Fully disambiguate this case: it turns out that the grammars of message-sends,
lambdas and attributes do not actually overlap. Accept any occurrence of '[['
where either '[' starts a message send, but reject a lambda in an array index
just like in C++11 mode.
Implement a couple of changes to the attribute wording which occurred after our
attributes implementation landed:
* In a function-declaration, the attributes go after the exception specification,
not after the right paren.
* A reference type can have attributes applied.
* An 'identifier' in an attribute can also be a keyword. Support for alternative
tokens (iso646 keywords) in attributes to follow.
And some bug fixes:
* Parse attributes after declarator-ids, even if they are not simple identifiers.
* Do not accept attributes after a parenthesized declarator.
* Accept attributes after an array size in a new-type-id.
* Partially disamiguate 'delete' followed by a lambda. More work is required
here for the case where the lambda-introducer is '[]'.
llvm-svn: 154369
a type specifier and can be combined with unsigned. This allows libstdc++4.7 to
be used with clang in c++98 mode.
Several other changes are still required for libstdc++4.7 to work with clang in
c++11 mode.
llvm-svn: 153999
defined here, but not semantically, so
new struct S {};
is always ill-formed, even if there is a struct S in scope.
We also had a couple of bugs in ParseOptionalTypeSpecifier caused by it being
under-loved (due to it only being used in a few places) so merge it into
ParseDeclarationSpecifiers with a new DeclSpecContext. To avoid regressing, this
required improving ParseDeclarationSpecifiers' diagnostics in some cases. This
also required teaching ParseSpecifierQualifierList about constexpr... which
incidentally fixes an issue where we'd allow the constexpr specifier in other
bad places.
llvm-svn: 152549
for a few kinds of error. Specifically:
Since we're after translation phase 6, the "" token might be formed by multiple
source-level string literals. Checking the token width is not a correct way of
detecting empty string literals, due to escaped newlines. Diagnose and recover
from a missing space between "" and suffix, and from string literals other than
"", which are followed by a suffix.
llvm-svn: 152348
grammar requires a string-literal and not a user-defined-string-literal. The
two constructs are still represented by the same TokenKind, in order to prevent
a combinatorial explosion of different kinds of token. A flag on Token tracks
whether a ud-suffix is present, in order to prevent clients from needing to look
at the token's spelling.
llvm-svn: 152098
that provides the behavior of the C++11 library trait
std::is_trivially_constructible<T, Args...>, which can't be
implemented purely as a library.
Since __is_trivially_constructible can have zero or more arguments, I
needed to add Yet Another Type Trait Expression Class, this one
handling arbitrary arguments. The next step will be to migrate
UnaryTypeTrait and BinaryTypeTrait over to this new, more general
TypeTrait class.
Fixes the Clang side of <rdar://problem/10895483> / PR12038.
llvm-svn: 151352
that 'this' can be used in the brace-or-equal-initializer of a
non-static data member, and C++11 [expr.prim.lambda]p9, which says
that lambda expressions not in block scope can have no captures, side
fully with C++11 [expr.prim.general]p4 by allowing 'this' to be
captured within these initializers. This seems to be the intent of
non-static data member initializers.
llvm-svn: 151101
name mangling in the Itanium C++ ABI for lambda expressions is so
dependent on context, we encode the number used to encode each lambda
as part of the lambda closure type, and maintain this value within
Sema.
Note that there are a several pieces still missing:
- We still get the linkage of lambda expressions wrong
- We aren't properly numbering or mangling lambda expressions that
occur in default function arguments or in data member initializers.
- We aren't (de-)serializing the lambda numbering tables
llvm-svn: 150982
loop and switch statements, by teaching Scope that a function scope never has
a continue/break parent for the purposes of control flow. Remove the hack in
block and lambda expressions which worked around this by pretending that such
expressions were continue/break scopes.
Remove Scope::ControlParent, since it's unused.
In passing, teach default statements to recover properly from a missing ';', and
add a fixit for same to both default and case labels (the latter already
recovered correctly).
llvm-svn: 150776
Holding the constructor directly makes no sense when list-initialized arrays come into play. The constructor is now held in a CXXConstructExpr, if construction is what is done. The new design can also distinguish properly between list-initialization and direct-initialization, as well as implicit default-initialization constructors and explicit value-initialization constructors. Finally, doing it this way removes redundance from the AST because CXXNewExpr doesn't try to handle both the allocation and the initialization responsibilities.
This breaks the static analysis of new expressions. I've filed PR12014 to track this.
llvm-svn: 150682
default is '=', and reword the warning about explicitly capturing
'this' in such lambdas to indicate that only explicit capture is
banned.
Introduce Fix-Its for this and other "save the programmer from
themself" rules regarding what can be explicitly captured and what
must be implicitly captured.
llvm-svn: 150256
Pass a typo correction callback object from ParseCastExpr to
Sema::ActOnIdExpression to be a bit more selective about what kinds of
corrections will be allowed for unknown identifiers.
llvm-svn: 148973
Old error:
plusequaldeclare1.cc:3:8: error: expected ';' at end of declaration
int x += 6;
^
;
New error:
plusequaldeclare1.cc:3:9: error: invalid '+=' at end of declaration; did you
mean '='?
int x += 6;
^~
=
llvm-svn: 148433
and DefaultFunctionArrayLvalueConversion. To prevent
significant regression for should-this-be-a-call fixits,
and to repair some such regression from the introduction of
bound member placeholders, make those placeholder checks
try to build calls appropriately. Harden the build-a-call
logic while we're at it.
llvm-svn: 141738
For instance:
template <class T> void E() {};
class F {};
void test() {
::E<::F>();
E<::F>();
}
Gives the following error messages:
error: found '<::' after a template name which forms the
digraph '<:' (aka '[') and a ':', did you mean '< ::'?
::E<::F>();
^~~
< ::
error: expected expression
E<::F>();
^
error: expected ']'
note: to match this '['
E<::F>();
This patch adds the digraph fix-it check right before the name lookup,
moves the shared checking code to a new function, and adds new
tests to catch future regressions.
llvm-svn: 140039
Previously we would cut off the source file buffer at the code-completion
point; this impeded code-completion inside C++ inline methods and,
recently, with buffering ObjC methods.
Have the code-completion inserted into the source buffer so that it can
be buffered along with a method body. When we actually hit the code-completion
point the cut-off lexing or parsing.
Fixes rdar://10056932&8319466
llvm-svn: 139086
throw-expressions, such that we don't consider the NRVO when the
non-volatile automatic object comes from outside the innermost try
scope (C++0x [class.copymove]p13). In C++98/03, our ASTs were
incorrect but it didn't matter because IR generation doesn't actually
apply the NRVO here. In C++0x, however, we were moving from an object
when in fact we should have copied from it. Fixes PR10142 /
<rdar://problem/9714312>.
llvm-svn: 134548
cast type has no ownership specified, implicitly "transfer" the ownership of the cast'ed type
to the cast type:
id x;
(NSString**)&x; // Casting as (__strong NSString**).
llvm-svn: 134275
cast type has no ownership specified, implicitly "transfer" the ownership of the cast'ed type
to the cast type:
id x;
static_cast<NSString**>(&x); // Casting as (__strong NSString**).
This currently only works for C++ named casts, C casts to follow.
llvm-svn: 134273
lifetime is well-known and restricted, cleaning them up manually is easy to miss and cause a leak.
Use it to plug the leaking of TemplateIdAnnotation objects. rdar://9634138.
llvm-svn: 133610
As might be surmised from their names, these aren't type traits, they're
expression traits. Amazingly enough, they're expression traits that we
have, and fully implement. These "type" traits are even parsed from the
same tokens as the expression traits. Luckily, the parser only tried the
expression trait parsing for these tokens, so this was all just a pile
of dead code.
llvm-svn: 130643
Patch authored by John Wiegley.
These are array type traits used for parsing code that employs certain
features of the Embarcadero C++ compiler: __array_rank(T) and
__array_extent(T, Dim).
llvm-svn: 130351
Patch authored by John Wiegley.
These type traits are used for parsing code that employs certain features of
the Embarcadero C++ compiler. Several of these constructs are also desired by
libc++, according to its project pages (such as __is_standard_layout).
llvm-svn: 130342
Patch authored by David Abrahams.
These two expression traits (__is_lvalue_expr, __is_rvalue_expr) are used for
parsing code that employs certain features of the Embarcadero C++ compiler.
llvm-svn: 130122
'__is_literal' type trait for GCC compatibility. At least one relased
version if libstdc++ uses this name for the trait despite it not being
documented anywhere.
llvm-svn: 130078
This introduces a few APIs on the AST to bundle up the standard-based
logic so that programmatic clients have access to exactly the same
behavior.
There is only one serious FIXME here: checking for non-trivial move
constructors and move assignment operators. Those bits need to be added
to the declaration and accessors provided.
This implementation should be enough for the uses of __is_trivial in
libstdc++ 4.6's C++98 library implementation.
Ideas for more thorough test cases or any edge cases missing would be
appreciated. =D
llvm-svn: 130057
AttributeLists do not accumulate over the lifetime of parsing, but are
instead reused. Also make the arguments array not require a separate
allocation, and make availability attributes store their stuff in
augmented memory, too.
llvm-svn: 128209
to cope with non-type templates by providing appropriate
errors. Previously, we would either assert, crash, or silently build a
dependent type when we shouldn't. Fixes PR9226.
llvm-svn: 127037
template specialization types. This also required some parser tweaks,
since we were losing track of the nested-name-specifier's source
location information in several places in the parser. Other notable
changes this required:
- Sema::ActOnTagTemplateIdType now type-checks and forms the
appropriate type nodes (+ source-location information) for an
elaborated-type-specifier ending in a template-id. Previously, we
used a combination of ActOnTemplateIdType and
ActOnTagTemplateIdType that resulted in an ElaboratedType wrapped
around a DependentTemplateSpecializationType, which duplicated the
keyword ("class", "struct", etc.) and nested-name-specifier
storage.
- Sema::ActOnTemplateIdType now gets a nested-name-specifier, which
it places into the returned type-source location information.
- Sema::ActOnDependentTag now creates types with source-location
information.
llvm-svn: 126808
nested-name-speciciers within elaborated type names, e.g.,
enum clang::NestedNameSpecifier::SpecifierKind
Fixes in this iteration include:
(1) Compute the type-source range properly for a dependent template
specialization type that starts with "template template-id ::", as
in a member access expression
dep->template f<T>::f()
This is a latent bug I triggered with this change (because now we're
checking the computed source ranges for dependent template
specialization types). But the real problem was...
(2) Make sure to set the qualifier range on a dependent template
specialization type appropriately. This will go away once we push
nested-name-specifier locations into dependent template
specialization types, but it was the source of the
valgrind errors on the buildbots.
llvm-svn: 126765
information for qualifier type names throughout the parser to address
several problems.
The commit message from r126737:
Push nested-name-specifier source location information into elaborated
name types, e.g., "enum clang::NestedNameSpecifier::SpecifierKind".
Aside from the normal changes, this also required some tweaks to the
parser. Essentially, when we're looking at a type name (via
getTypeName()) specifically for the purpose of creating an annotation
token, we pass down the flag that asks for full type-source location
information to be stored within the returned type. That way, we retain
source-location information involving nested-name-specifiers rather
than trying to reconstruct that information later, long after it's
been lost in the parser.
With this change, test/Index/recursive-cxx-member-calls.cpp is showing
much improved results again, since that code has lots of
nested-name-specifiers.
llvm-svn: 126748
nested-name-specifier, e.g.,
T::template apply<U>::
represent the dependent template name specialization as a
DependentTemplateSpecializationType, rather than a
TemplateSpecializationType with a dependent TemplateName.
llvm-svn: 126593
nested-name-specifiers throughout the parser, and provide a new class
(NestedNameSpecifierLoc) that contains a nested-name-specifier along
with its type-source information.
Right now, this information is completely useless, because we don't
actually store the source-location information anywhere in the
AST. Call this Step 1/N.
llvm-svn: 126391
with another component in the nested-name-specifiers, updating its
representation (a NestedNameSpecifier) and source-location information
(currently a SourceRange) simultaneously. This is groundwork for
adding source-location information to nested-name-specifiers.
llvm-svn: 126346
* Flag indicating 'we're parsing this auto typed variable's initializer' moved from VarDecl to Sema
* Temporary template parameter list for auto deduction is now allocated on the stack.
* Deduced 'auto' types are now uniqued.
llvm-svn: 126139
semantics after the C++0x is_convertible type trait. This
implementation is not 100% complete, because it allows access errors
to be hard errors (rather than just evaluating false).
Original patch by Steven Watanabe!
llvm-svn: 124425
a pack expansion, e.g., the parameter pack Values in:
template<typename ...Types>
struct Outer {
template<Types ...Values>
struct Inner;
};
This new implementation approach introduces the notion of an
"expanded" non-type template parameter pack, for which we have already
expanded the types of the parameter pack (to, say, "int*, float*",
for Outer<int*, float*>) but have not yet expanded the values. Aside
from creating these expanded non-type template parameter packs, this
patch updates template argument checking and non-type template
parameter pack instantiation to make use of the appropriate types in
the parameter pack.
llvm-svn: 123845
with comma-separated lists. We never actually used the comma
locations, nor did we store them in the AST, but we did manage to
waste time during template instantiation to produce fake locations.
llvm-svn: 113495
typeid expressions:
- make sure we have a proper source location for the closing ')'
- cache the declaration of std::type_info once we've found it
llvm-svn: 113441
an '&' expression from the second caller of ActOnIdExpression.
Teach template argument deduction that an overloaded id-expression
doesn't give a valid type for deduction purposes to a non-static
member function unless the expression has the correct syntactic
form.
Teach ActOnIdExpression that it shouldn't try to create implicit
member expressions for '&function', because this isn't a
permitted form of use for member functions.
Teach CheckAddressOfOperand to diagnose these more carefully.
Some of these cases aren't reachable right now because earlier
diagnostics interrupt them.
llvm-svn: 112258
One who seeks the Tao unlearns something new every day.
Less and less remains until you arrive at non-action.
When you arrive at non-action,
nothing will be left undone.
llvm-svn: 112244
- move DeclSpec &c into the Sema library
- move ParseAST into the Parse library
Reflect this change in a thousand different includes.
Reflect this change in the link orders.
llvm-svn: 111667
size" error for code like
new (int [size])
to a warning, add a Fix-It to remove the parentheses, and make this
diagnostic work properly when it occurs in a template
instantiation. <rdar://problem/8018245>.
llvm-svn: 108242
Aaron Ballman