Add an option to cache the generated PCH in the ModuleCache when
emitting it. This protects clients that build PCHs and read them in the
same process, allowing them to avoid race conditions between parallel
jobs the same way that Clang's implicit module build system does.
rdar://problem/48740787
llvm-svn: 355950
Leverage the InMemoryModuleCache to invalidate a module the first time
it fails to import (and to lock a module as soon as it's built or
imported successfully). For implicit module builds, this optimizes
importing deep graphs where the leaf module is out-of-date; see example
near the end of the commit message.
Previously the cache finalized ("locked in") all modules imported so far
when starting a new module build. This was sufficient to prevent
loading two versions of the same module, but was somewhat arbitrary and
hard to reason about.
Now the cache explicitly tracks module state, where each module must be
one of:
- Unknown: module not in the cache (yet).
- Tentative: module in the cache, but not yet fully imported.
- ToBuild: module found on disk could not be imported; need to build.
- Final: module in the cache has been successfully built or imported.
Preventing repeated failed imports avoids variation in builds based on
shifting filesystem state. Now it's guaranteed that a module is loaded
from disk exactly once. It now seems safe to remove
FileManager::invalidateCache, but I'm leaving that for a later commit.
The new, precise logic uncovered a pre-existing problem in the cache:
the map key is the module filename, and different contexts use different
filenames for the same PCM file. (In particular, the test
Modules/relative-import-path.c does not build without this commit.
r223577 started using a relative path to describe a module's base
directory when importing it within another module. As a result, the
module cache sees an absolute path when (a) building the module or
importing it at the top-level, and a relative path when (b) importing
the module underneath another one.)
The "obvious" fix is to resolve paths using FileManager::getVirtualFile
and change the map key for the cache to a FileEntry, but some contexts
(particularly related to ASTUnit) have a shorter lifetime for their
FileManager than the InMemoryModuleCache. This is worth pursuing
further in a later commit; perhaps by tying together the FileManager and
InMemoryModuleCache lifetime, or moving the in-memory PCM storage into a
VFS layer.
For now, use the PCM's base directory as-written for constructing the
filename to check the ModuleCache.
Example
=======
To understand the build optimization, first consider the build of a
module graph TU -> A -> B -> C -> D with an empty cache:
TU builds A'
A' builds B'
B' builds C'
C' builds D'
imports D'
B' imports C'
imports D'
A' imports B'
imports C'
imports D'
TU imports A'
imports B'
imports C'
imports D'
If we build TU again, where A, B, C, and D are in the cache and D is
out-of-date, we would previously get this build:
TU imports A
imports B
imports C
imports D (out-of-date)
TU builds A'
A' imports B
imports C
imports D (out-of-date)
builds B'
B' imports C
imports D (out-of-date)
builds C'
C' imports D (out-of-date)
builds D'
imports D'
B' imports C'
imports D'
A' imports B'
imports C'
imports D'
TU imports A'
imports B'
imports C'
imports D'
After this commit, we'll immediateley invalidate A, B, C, and D when we
first observe that D is out-of-date, giving this build:
TU imports A
imports B
imports C
imports D (out-of-date)
TU builds A' // The same graph as an empty cache.
A' builds B'
B' builds C'
C' builds D'
imports D'
B' imports C'
imports D'
A' imports B'
imports C'
imports D'
TU imports A'
imports B'
imports C'
imports D'
The new build matches what we'd naively expect, pretty closely matching
the original build with the empty cache.
rdar://problem/48545366
llvm-svn: 355778
Change MemoryBufferCache to InMemoryModuleCache, moving it from Basic to
Serialization. Another patch will start using it to manage module build
more explicitly, but this is split out because it's mostly mechanical.
Because of the move to Serialization we can no longer abuse the
Preprocessor to forward it to the ASTReader. Besides the rename and
file move, that means Preprocessor::Preprocessor has one fewer parameter
and ASTReader::ASTReader has one more.
llvm-svn: 355777
Summary:
FileData was only ever used as a container for the values in
llvm::vfs::Status, so they might as well be consolidated.
The `InPCH` member was also always set to false, and unused.
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D58924
llvm-svn: 355368
Part 1 of CSPGO change in Clang. This includes changes in clang options
and calls to llvm PassManager. Tests will be committed in part2.
This change needs the PassManager change in llvm.
Differential Revision: https://reviews.llvm.org/D54176
llvm-svn: 355331
enum SanitizerOrdinal has reached maximum capacity, this change extends the capacity to 128 sanitizer checks.
This can eventually allow us to add gcc 8's options "-fsanitize=pointer-substract" and "-fsanitize=pointer-compare".
This is a recommit of r354873 but with a fix for unqualified lookup error in lldb cmake build bot.
Fixes: https://llvm.org/PR39425
Differential Revision: https://reviews.llvm.org/D57914
llvm-svn: 355190
enum SanitizerOrdinal has reached maximum capacity, this change extends the capacity to 128 sanitizer checks.
This can eventually allow us to add gcc 8's options "-fsanitize=pointer-substract" and "-fsanitize=pointer-compare".
Fixes: https://llvm.org/PR39425
Differential Revision: https://reviews.llvm.org/D57914
llvm-svn: 354873
We unconditionally predefine these macros. However, they may be used to
determine if the type is supported. In that case, there are unnecessary
failures to compile the code.
This is the proposed fix for https://bugs.llvm.org/show_bug.cgi?id=40559
Differential revision: https://reviews.llvm.org/D57577
llvm-svn: 354512
A faster way to reduce the values in teams reductions was found, the
codegen is updated to use this faster algorithm and new runtime functions.
llvm-svn: 354479
This adds ACLE-defined macros to test for code being compiled in the ROPI and
RWPI position-independence modes.
Differential revision: https://reviews.llvm.org/D23610
llvm-svn: 354265
Fixed diagnostic emission for the exceptions support in case of the
compilation of OpenMP code for the devices. From now on, it uses delayed
diagnostics mechanism, previously used for CUDA only. It allow to
diagnose not allowed used of exceptions only in functions that are going
to be codegen'ed.
llvm-svn: 353542
It is important to delay the emission of the diagnostic messages for the
functions unless it is proved that the function is going to be used on
the device side. It is required to support compilation with some of the
target-specific system headers.
llvm-svn: 353540
Valid OpenCL C code should still compile in C++ mode.
This change enables extensions and OpenCL types.
Differential Revision: https://reviews.llvm.org/D57824
llvm-svn: 353431
When a framework with the same name is available at multiple framework
search paths, we use the first matching location. If a framework at this
location doesn't have all the headers, it can be confusing for
developers because they see only an error `'Foo/Foo.h' file not found`,
can find the complete framework with required header, and don't know the
incomplete framework was used instead.
Add a note explaining a framework without required header was found.
Also mention framework directory path to make it easier to find the
incomplete framework.
rdar://problem/39246514
Reviewers: arphaman, erik.pilkington, jkorous
Reviewed By: jkorous
Subscribers: jkorous, dexonsmith, cfe-commits
Differential Revision: https://reviews.llvm.org/D56561
llvm-svn: 353231
Summary:
This adds support for new-PM plugin loading to clang. The option
`-fpass-plugin=` may be used to specify a dynamic shared object file
that adheres to the PassPlugin API.
Tested: created simple plugin that registers an EP callback; with optimization level > 0, the pass is run as expected.
Committed on behalf of Marco Elver
Differential Revision: https://reviews.llvm.org/D56935
llvm-svn: 352972
- fixes the test on macOS with LLVM_ENABLE_PIC=OFF
- together with D57343, gets the test to pass on Windows
- makes it run everywhere (it seems to just pass on Linux)
The main change is to pull out the resource directory computation into a
function shared by all 3 places that do it. In CIndexer.cpp, this now works no
matter if libclang is in lib/ or bin/ or statically linked to a binary in bin/.
Differential Revision: https://reviews.llvm.org/D57345
llvm-svn: 352803
In 64 bit MSVC environment size_t is defined as unsigned long long.
In single source language like HIP, data layout should be consistent
in device and host compilation, therefore copy data layout controlling
fields from Aux target for AMDGPU target.
Differential Revision: https://reviews.llvm.org/D56318
llvm-svn: 352620
Use the real_path implementation from llvm::sys::fs::real_path instead
of having a custom implementation in the ModuleDependencyCollector.
Differential revision: https://reviews.llvm.org/D57411
llvm-svn: 352605
Introduce an option to request global visibility settings be applied to
declarations without a definition or an explicit visibility, rather than
the existing behavior of giving these default visibility. When the
visibility of all or most extern definitions are known this allows for
the same optimisations -fvisibility permits without updating source code
to annotate all declarations.
Differential Revision: https://reviews.llvm.org/D56868
llvm-svn: 352391
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
Adds a new -f[no]split-lto-unit flag that is disabled by default to
control module splitting during ThinLTO. It is automatically enabled
for -fsanitize=cfi and -fwhole-program-vtables.
The new EnableSplitLTOUnit codegen flag is passed down to llvm
via a new module flag of the same name.
Depends on D53890.
Reviewers: pcc
Subscribers: ormris, mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, cfe-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D53891
llvm-svn: 350949
Summary:
P1353R0, adopted in San Diego, specified an implementation feature test macro for destroying delete (P0722R3).
The implementation of the feature (https://reviews.llvm.org/rL315662) is not guarded behind a flag, so the macro is not conditional on language version.
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D55741
llvm-svn: 350934
Summary: Introduce a compiler flag for cases when the user knows that the collapsed loop counter can be safely represented using at most 32 bits. This will prevent the emission of expensive mathematical operations (such as the div operation) on the iteration variable using 64 bits where 32 bit operations are sufficient.
Reviewers: ABataev, caomhin
Reviewed By: ABataev
Subscribers: hfinkel, kkwli0, guansong, cfe-commits
Differential Revision: https://reviews.llvm.org/D55928
llvm-svn: 350758
Moves the code added in r350340 around a bit, to hopefully make the existing
plugin tests pass when clang is built with examples enabled.
llvm-svn: 350451
The problem is similar to D55986 but for threads: a process with the
interceptor hwasan library loaded might have some threads started by
instrumented libraries and some by uninstrumented libraries, and we
need to be able to run instrumented code on the latter.
The solution is to perform per-thread initialization lazily. If a
function needs to access shadow memory or add itself to the per-thread
ring buffer its prologue checks to see whether the value in the
sanitizer TLS slot is null, and if so it calls __hwasan_thread_enter
and reloads from the TLS slot. The runtime does the same thing if it
needs to access this data structure.
This change means that the code generator needs to know whether we
are targeting the interceptor runtime, since we don't want to pay
the cost of lazy initialization when targeting a platform with native
hwasan support. A flag -fsanitize-hwaddress-abi={interceptor,platform}
has been introduced for selecting the runtime ABI to target. The
default ABI is set to interceptor since it's assumed that it will
be more common that users will be compiling application code than
platform code.
Because we can no longer assume that the TLS slot is initialized,
the pthread_create interceptor is no longer necessary, so it has
been removed.
Ideally, lazy initialization should only cost one instruction in the
hot path, but at present the call may cause us to spill arguments
to the stack, which means more instructions in the hot path (or
theoretically in the cold path if the spills are moved with shrink
wrapping). With an appropriately chosen calling convention for
the per-thread initialization function (TODO) the hot path should
always need just one instruction and the cold path should need two
instructions with no spilling required.
Differential Revision: https://reviews.llvm.org/D56038
llvm-svn: 350429
-plugin already prints an error if the name of an unknown plugin is passed.
-add-plugin used to silently ignore that, now it errors too.
Differential Revision: https://reviews.llvm.org/D56273
llvm-svn: 350340
Since CallExpr::setNumArgs has been removed, it is now possible to store the
callee expression and the argument expressions of CallExpr in a trailing array.
This saves one pointer per CallExpr, CXXOperatorCallExpr, CXXMemberCallExpr,
CUDAKernelCallExpr and UserDefinedLiteral.
Given that CallExpr is used as a base of the above classes we cannot use
llvm::TrailingObjects. Instead we store the offset in bytes from the this pointer
to the start of the trailing objects and manually do the casts + arithmetic.
Some notes:
1.) I did not try to fit the number of arguments in the bit-fields of Stmt.
This leaves some space for future additions and avoid the discussion about
whether x bits are sufficient to hold the number of arguments.
2.) It would be perfectly possible to recompute the offset to the trailing
objects before accessing the trailing objects. However the trailing objects
are frequently accessed and benchmarks show that it is slightly faster to
just load the offset from the bit-fields. Additionally, because of 1),
we have plenty of space in the bit-fields of Stmt.
Differential Revision: https://reviews.llvm.org/D55771
Reviewed By: rjmccall
llvm-svn: 349910
All of the other constructors already take a reference to the AST context.
This avoids calling Decl::getASTContext in most cases. Additionally move
the definition of the constructor from Expr.h to Expr.cpp since it is calling
DeclRefExpr::computeDependence. NFC.
llvm-svn: 349901
Summary:
Add an option to initialize automatic variables with either a pattern or with
zeroes. The default is still that automatic variables are uninitialized. Also
add attributes to request uninitialized on a per-variable basis, mainly to disable
initialization of large stack arrays when deemed too expensive.
This isn't meant to change the semantics of C and C++. Rather, it's meant to be
a last-resort when programmers inadvertently have some undefined behavior in
their code. This patch aims to make undefined behavior hurt less, which
security-minded people will be very happy about. Notably, this means that
there's no inadvertent information leak when:
- The compiler re-uses stack slots, and a value is used uninitialized.
- The compiler re-uses a register, and a value is used uninitialized.
- Stack structs / arrays / unions with padding are copied.
This patch only addresses stack and register information leaks. There's many
more infoleaks that we could address, and much more undefined behavior that
could be tamed. Let's keep this patch focused, and I'm happy to address related
issues elsewhere.
To keep the patch simple, only some `undef` is removed for now, see
`replaceUndef`. The padding-related infoleaks are therefore not all gone yet.
This will be addressed in a follow-up, mainly because addressing padding-related
leaks should be a stand-alone option which is implied by variable
initialization.
There are three options when it comes to automatic variable initialization:
0. Uninitialized
This is C and C++'s default. It's not changing. Depending on code
generation, a programmer who runs into undefined behavior by using an
uninialized automatic variable may observe any previous value (including
program secrets), or any value which the compiler saw fit to materialize on
the stack or in a register (this could be to synthesize an immediate, to
refer to code or data locations, to generate cookies, etc).
1. Pattern initialization
This is the recommended initialization approach. Pattern initialization's
goal is to initialize automatic variables with values which will likely
transform logic bugs into crashes down the line, are easily recognizable in
a crash dump, without being values which programmers can rely on for useful
program semantics. At the same time, pattern initialization tries to
generate code which will optimize well. You'll find the following details in
`patternFor`:
- Integers are initialized with repeated 0xAA bytes (infinite scream).
- Vectors of integers are also initialized with infinite scream.
- Pointers are initialized with infinite scream on 64-bit platforms because
it's an unmappable pointer value on architectures I'm aware of. Pointers
are initialize to 0x000000AA (small scream) on 32-bit platforms because
32-bit platforms don't consistently offer unmappable pages. When they do
it's usually the zero page. As people try this out, I expect that we'll
want to allow different platforms to customize this, let's do so later.
- Vectors of pointers are initialized the same way pointers are.
- Floating point values and vectors are initialized with a negative quiet
NaN with repeated 0xFF payload (e.g. 0xffffffff and 0xffffffffffffffff).
NaNs are nice (here, anways) because they propagate on arithmetic, making
it more likely that entire computations become NaN when a single
uninitialized value sneaks in.
- Arrays are initialized to their homogeneous elements' initialization
value, repeated. Stack-based Variable-Length Arrays (VLAs) are
runtime-initialized to the allocated size (no effort is made for negative
size, but zero-sized VLAs are untouched even if technically undefined).
- Structs are initialized to their heterogeneous element's initialization
values. Zero-size structs are initialized as 0xAA since they're allocated
a single byte.
- Unions are initialized using the initialization for the largest member of
the union.
Expect the values used for pattern initialization to change over time, as we
refine heuristics (both for performance and security). The goal is truly to
avoid injecting semantics into undefined behavior, and we should be
comfortable changing these values when there's a worthwhile point in doing
so.
Why so much infinite scream? Repeated byte patterns tend to be easy to
synthesize on most architectures, and otherwise memset is usually very
efficient. For values which aren't entirely repeated byte patterns, LLVM
will often generate code which does memset + a few stores.
2. Zero initialization
Zero initialize all values. This has the unfortunate side-effect of
providing semantics to otherwise undefined behavior, programs therefore
might start to rely on this behavior, and that's sad. However, some
programmers believe that pattern initialization is too expensive for them,
and data might show that they're right. The only way to make these
programmers wrong is to offer zero-initialization as an option, figure out
where they are right, and optimize the compiler into submission. Until the
compiler provides acceptable performance for all security-minded code, zero
initialization is a useful (if blunt) tool.
I've been asked for a fourth initialization option: user-provided byte value.
This might be useful, and can easily be added later.
Why is an out-of band initialization mecanism desired? We could instead use
-Wuninitialized! Indeed we could, but then we're forcing the programmer to
provide semantics for something which doesn't actually have any (it's
uninitialized!). It's then unclear whether `int derp = 0;` lends meaning to `0`,
or whether it's just there to shut that warning up. It's also way easier to use
a compiler flag than it is to manually and intelligently initialize all values
in a program.
Why not just rely on static analysis? Because it cannot reason about all dynamic
code paths effectively, and it has false positives. It's a great tool, could get
even better, but it's simply incapable of catching all uses of uninitialized
values.
Why not just rely on memory sanitizer? Because it's not universally available,
has a 3x performance cost, and shouldn't be deployed in production. Again, it's
a great tool, it'll find the dynamic uses of uninitialized variables that your
test coverage hits, but it won't find the ones that you encounter in production.
What's the performance like? Not too bad! Previous publications [0] have cited
2.7 to 4.5% averages. We've commmitted a few patches over the last few months to
address specific regressions, both in code size and performance. In all cases,
the optimizations are generally useful, but variable initialization benefits
from them a lot more than regular code does. We've got a handful of other
optimizations in mind, but the code is in good enough shape and has found enough
latent issues that it's a good time to get the change reviewed, checked in, and
have others kick the tires. We'll continue reducing overheads as we try this out
on diverse codebases.
Is it a good idea? Security-minded folks think so, and apparently so does the
Microsoft Visual Studio team [1] who say "Between 2017 and mid 2018, this
feature would have killed 49 MSRC cases that involved uninitialized struct data
leaking across a trust boundary. It would have also mitigated a number of bugs
involving uninitialized struct data being used directly.". They seem to use pure
zero initialization, and claim to have taken the overheads down to within noise.
Don't just trust Microsoft though, here's another relevant person asking for
this [2]. It's been proposed for GCC [3] and LLVM [4] before.
What are the caveats? A few!
- Variables declared in unreachable code, and used later, aren't initialized.
This goto, Duff's device, other objectionable uses of switch. This should
instead be a hard-error in any serious codebase.
- Volatile stack variables are still weird. That's pre-existing, it's really
the language's fault and this patch keeps it weird. We should deprecate
volatile [5].
- As noted above, padding isn't fully handled yet.
I don't think these caveats make the patch untenable because they can be
addressed separately.
Should this be on by default? Maybe, in some circumstances. It's a conversation
we can have when we've tried it out sufficiently, and we're confident that we've
eliminated enough of the overheads that most codebases would want to opt-in.
Let's keep our precious undefined behavior until that point in time.
How do I use it:
1. On the command-line:
-ftrivial-auto-var-init=uninitialized (the default)
-ftrivial-auto-var-init=pattern
-ftrivial-auto-var-init=zero -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
2. Using an attribute:
int dont_initialize_me __attribute((uninitialized));
[0]: https://users.elis.ugent.be/~jsartor/researchDocs/OOPSLA2011Zero-submit.pdf
[1]: https://twitter.com/JosephBialek/status/1062774315098112001
[2]: https://outflux.net/slides/2018/lss/danger.pdf
[3]: https://gcc.gnu.org/ml/gcc-patches/2014-06/msg00615.html
[4]: 776a0955ef
[5]: http://wg21.link/p1152
I've also posted an RFC to cfe-dev: http://lists.llvm.org/pipermail/cfe-dev/2018-November/060172.html
<rdar://problem/39131435>
Reviewers: pcc, kcc, rsmith
Subscribers: JDevlieghere, jkorous, dexonsmith, cfe-commits
Differential Revision: https://reviews.llvm.org/D54604
llvm-svn: 349442
pass in the -target-sdk-version to the compiler and backend
This commit adds support for reading the SDKSettings.json file in the Darwin
driver. This file is used by the driver to determine the SDK's version, and it
uses that information to pass it down to the compiler using the new
-target-sdk-version= option. This option is then used to set the appropriate
SDK Version module metadata introduced in r349119.
Note: I had to adjust the two ast tests as the SDKROOT environment variable
on macOS caused SDK version to be picked up for the compilation of source file
but not the AST.
rdar://45774000
Differential Revision: https://reviews.llvm.org/D55673
llvm-svn: 349380
Summary:
There are certain cases when normal C/C++ lookup (localUncachedLookup)
does not find AST nodes. E.g.:
Example 1:
template <class T>
struct X {
friend void foo(); // this is never found in the DC of the TU.
};
Example 2:
// The fwd decl to Foo is not found in the lookupPtr of the DC of the
// translation unit decl.
struct A { struct Foo *p; };
In these cases we create a new node instead of returning with the old one.
To fix it we create a new lookup table which holds every node and we are
not interested in any C++ specific visibility considerations.
Simply, we must know if there is an existing Decl in a given DC.
Reviewers: a_sidorin, a.sidorin
Subscribers: mgorny, rnkovacs, dkrupp, Szelethus, cfe-commits
Differential Revision: https://reviews.llvm.org/D53708
llvm-svn: 349351
Implement options in clang to enable recording the driver command-line
in an ELF section.
Implement a new special named metadata, llvm.commandline, to support
frontends embedding their command-line options in IR/ASM/ELF.
This differs from the GCC implementation in some key ways:
* In GCC there is only one command-line possible per compilation-unit,
in LLVM it mirrors llvm.ident and multiple are allowed.
* In GCC individual options are separated by NULL bytes, in LLVM entire
command-lines are separated by NULL bytes. The advantage of the GCC
approach is to clearly delineate options in the face of embedded
spaces. The advantage of the LLVM approach is to support merging
multiple command-lines unambiguously, while handling embedded spaces
with escaping.
Differential Revision: https://reviews.llvm.org/D54487
Clang Differential Revision: https://reviews.llvm.org/D54489
llvm-svn: 349155
Move some diagnostics around between Diagnostic*Kinds.td files. Diagnostics
used in multiple places were moved to DiagnosticCommonKinds.td. Diagnostics
listed in the wrong place (ie, Sema diagnostics listed in
DiagnosticsParseKinds.td) were moved to the correct places. One diagnostic
split into two so that the diagnostic string is in the .td file instead of in
code. Cleaned up the diagnostic includes after all the changes.
llvm-svn: 349125
It is faster to directly call the ObjC runtime for methods such as alloc/allocWithZone instead of sending a message to those functions.
This patch adds support for converting messages to alloc/allocWithZone to their equivalent runtime calls.
Tests included for the positive case of applying this transformation, negative tests that we ensure we only convert "alloc" to objc_alloc, not "alloc2", and also a driver test to ensure we enable this only for supported runtime versions.
Reviewed By: rjmccall
https://reviews.llvm.org/D55349
llvm-svn: 348687
Summary:
The intention is to make the tools replaying compilations from 'compile_commands.json'
(clang-tidy, clangd, etc.) find the same standard library as the original compiler
specified in 'compile_commands.json'.
Previously, the library detection logic was in the frontend (InitHeaderSearch.cpp) and relied
on the value of resource dir as an approximation of the compiler install dir. The new logic
uses the actual compiler install dir and is performed in the driver. This is consistent with
the C++ standard library detection on other platforms and allows to override the resource dir
in the tools using the compile_commands.json without altering the
standard library detection mechanism. The tools have to override the resource dir to make sure
they use a consistent version of the builtin headers.
There is still logic in InitHeaderSearch that attemps to add the absolute includes for the
the C++ standard library, so we keep passing the -stdlib=libc++ from the driver to the frontend
via cc1 args to avoid breaking that. In the long run, we should move this logic to the driver too,
but it could potentially break the library detection on other systems, so we don't tackle it in this
patch to keep its scope manageable.
This is a second attempt to fix the issue, first one was commited in r346652 and reverted in r346675.
The original fix relied on an ad-hoc propagation (bypassing the cc1 flags) of the install dir from the
driver to the frontend's HeaderSearchOptions. Unsurpisingly, the propagation was incomplete, it broke
the libc++ detection in clang itself, which caused LLDB tests to break.
The LLDB tests pass with new fix.
Reviewers: JDevlieghere, arphaman, EricWF
Reviewed By: arphaman
Subscribers: mclow.lists, ldionne, dexonsmith, ioeric, christof, kadircet, cfe-commits
Differential Revision: https://reviews.llvm.org/D54630
llvm-svn: 348365
When debugging a boost build with a modified
version of Clang, I discovered that the PTH implementation
stores TokenKind in 8 bits. However, we currently have 368
TokenKinds.
The result is that the value gets truncated and the wrong token
gets picked up when including PTH files. It seems that this will
go wrong every time someone uses a token that uses the 9th bit.
Upon asking on IRC, it was brought up that this was a highly
experimental features that was considered a failure. I discovered
via googling that BoostBuild (mostly Boost.Math) is the only user of
this
feature, using the CC1 flag directly. I believe that this can be
transferred over to normal PCH with minimal effort:
https://github.com/boostorg/build/issues/367
Based on advice on IRC and research showing that this is a nearly
completely unused feature, this patch removes it entirely.
Note: I considered leaving the build-flags in place and making them
emit an error/warning, however since I've basically identified and
warned the only user, it seemed better to just remove them.
Differential Revision: https://reviews.llvm.org/D54547
Change-Id: If32744275ef1f585357bd6c1c813d96973c4d8d9
llvm-svn: 348266
When the global new and delete operators aren't declared, Clang
provides and implicit declaration, but this declaration currently
always uses the default visibility. This is a problem when the
C++ library itself is being built with non-default visibility because
the implicit declaration will force the new and delete operators to
have the default visibility unlike the rest of the library.
The existing workaround is to use assembly to enforce the visiblity:
https://fuchsia.googlesource.com/zircon/+/master/system/ulib/zxcpp/new.cpp#108
but that solution is not always available, e.g. in the case of of
libFuzzer which is using an internal version of libc++ that's also built
with -fvisibility=hidden where the existing behavior is causing issues.
This change introduces a new option -fvisibility-global-new-delete-hidden
which makes the implicit declaration of the global new and delete
operators hidden.
Differential Revision: https://reviews.llvm.org/D53787
llvm-svn: 348234
In earlier patches regarding AnalyzerOptions, a lot of effort went into
gathering all config options, and changing the interface so that potential
misuse can be eliminited.
Up until this point, AnalyzerOptions only evaluated an option when it was
querried. For example, if we had a "-no-false-positives" flag, AnalyzerOptions
would store an Optional field for it that would be None up until somewhere in
the code until the flag's getter function is called.
However, now that we're confident that we've gathered all configs, we can
evaluate off of them before analysis, so we can emit a error on invalid input
even if that prticular flag will not matter in that particular run of the
analyzer. Another very big benefit of this is that debug.ConfigDumper will now
show the value of all configs every single time.
Also, almost all options related class have a similar interface, so uniformity
is also a benefit.
The implementation for errors on invalid input will be commited shorty.
Differential Revision: https://reviews.llvm.org/D53692
llvm-svn: 348031
This patch passes -fdebug-prefix-map (a feature for renaming source
paths in the debug info) through to the per-module codegen options and
adds the debug prefix map to the module hash.
<rdar://problem/46045865>
Differential Revision: https://reviews.llvm.org/D55037
llvm-svn: 347926
This adds Hurd toolchain support to Clang's driver in addition
to handling translating the triple from Hurd-compatible form to
the actual triple registered in LLVM.
(Phabricator was stripping the empty files from the patch so I
manually created them)
Patch by sthibaul (Samuel Thibault)
Differential Revision: https://reviews.llvm.org/D54379
llvm-svn: 347833
Summary:
the previous patch (https://reviews.llvm.org/rC346642) has been reverted because of test failure under windows.
So this patch fix the test cfe/trunk/test/CodeGen/code-coverage-filter.c.
Reviewers: marco-c
Reviewed By: marco-c
Subscribers: cfe-commits, sylvestre.ledru
Differential Revision: https://reviews.llvm.org/D54600
llvm-svn: 347144
Summary:
Experience has shown that the functionality is useful. It makes linking
optimized clang with debug info for me a lot faster, 20s to 13s. The
type merging phase of PDB writing goes from 10s to 3s.
This removes the LLVM cl::opt and replaces it with a metadata flag.
After this change, users can do the following to use ghash:
- add -gcodeview-ghash to compiler flags
- replace /DEBUG with /DEBUG:GHASH in linker flags
Reviewers: zturner, hans, thakis, takuto.ikuta
Subscribers: aprantl, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D54370
llvm-svn: 347072
Previously these would be transformed into annotation tokens and the
preprocessor would then assume they were real tokens with source
locations and assert/UB.
Other pragmas that produce annotation tokens aren't a problem because
they aren't handled if the parser isn't hooked up - ParsePragma.cpp
registers those handlers & isn't run for pure preprocessing. So they're
treated as unknown pragmas & printed verbatim by the preprocessor.
Perhaps these pragmas should be treated the same way? But they got mixed
in with other __debug pragmas that do need to be handled during
preprocessing.
The third __debug pragma that produces an annotation token is 'captured'
- which had its own fix for this issue - by not inserting the annotation
token in the first place if it detected that it was in preprocessing
mode. I've removed that fix (from Lex/Pragma.cpp) in favor of the more
general one in Frontend/PrintPreprocessedOutput.cpp.
llvm-svn: 346928
This unfortunately results in a substantial breaking change when
switching to C++20, but it's not yet clear what / how much we should
do about that. We may want to add a compatibility conversion from
u8 string literals to const char*, similar to how C++98 provided a
compatibility conversion from string literals to non-const char*,
but that's not handled by this patch.
The feature can be disabled in C++20 mode with -fno-char8_t.
llvm-svn: 346892
The DWARF5 specification says(Appendix F.1):
"The sections that do not require relocation, however, can be
written to the relocatable object (.o) file but ignored by the
linker or they can be written to a separate DWARF object (.dwo)
file that need not be accessed by the linker."
The first part describes a single file split DWARF feature and there
is no way to trigger this behavior atm.
Fortunately, no many changes are required to keep *.dwo sections
in a .o, the patch does that.
Differential revision: https://reviews.llvm.org/D52296
llvm-svn: 346837
Summary:
This saves a lot of relocations in optimized object files (at the cost
of some cost/increase in linked executable bytes), but gold's 32 bit
gdb-index support has a bug (
https://sourceware.org/bugzilla/show_bug.cgi?id=21894 ) so we can't
switch to this unconditionally. (& even if it weren't for that bug, one
might argue that some users would want to optimize in one direction or
the other - prioritizing object size or linked executable size)
Differential Revision: https://reviews.llvm.org/D54243
llvm-svn: 346789
Summary:
When they read compiler args from compile_commands.json.
This change allows to run clang-based tools, like clang-tidy or clangd,
built from head using the compile_commands.json file produced for XCode
toolchains.
On MacOS clang can find the C++ standard library relative to the
compiler installation dir.
The logic to do this was based on resource dir as an approximation of
where the compiler is installed. This broke the tools that read
'compile_commands.json' and don't ship with the compiler, as they
typically change resource dir.
To workaround this, we now use compiler install dir detected by the driver
to better mimic the behavior of the original compiler when replaying the
compilations using other tools.
Reviewers: sammccall, arphaman, EricWF
Reviewed By: sammccall
Subscribers: ioeric, christof, kadircet, cfe-commits
Differential Revision: https://reviews.llvm.org/D54310
llvm-svn: 346652
Summary:
These options are taking regex separated by colons to filter files.
- if both are empty then all files are instrumented
- if -fprofile-filter-files is empty then all the filenames matching any of the regex from exclude are not instrumented
- if -fprofile-exclude-files is empty then all the filenames matching any of the regex from filter are instrumented
- if both aren't empty then all the filenames which match any of the regex in filter and which don't match all the regex in filter are instrumented
- this patch is a follow-up of https://reviews.llvm.org/D52033
Reviewers: marco-c, vsk
Reviewed By: marco-c, vsk
Subscribers: cfe-commits, sylvestre.ledru
Differential Revision: https://reviews.llvm.org/D52034
llvm-svn: 346642
Fix places where the return type of a FunctionDecl was being used in
place of the function type
FunctionDecl::Create() takes as its T parameter the type of function
that should be created, not the return type. Passing in the return type
looks to have been copypasta'd around a bit, but the number of correct
usages outweighs the incorrect ones so I've opted for keeping what T is
the same and fixing up the call sites instead.
This fixes a crash in Clang when attempting to compile the following
snippet of code with -fblocks -fsanitize=function -x objective-c++ (my
original repro case):
void g(void(^)());
void f()
{
__block int a = 0;
g(^(){ a++; });
}
as well as the following which only requires -fsanitize=function -x c++:
void f(char * buf)
{
__builtin_os_log_format(buf, "");
}
Patch by: Ben (bobsayshilol)
Differential revision: https://reviews.llvm.org/D53263
llvm-svn: 346601
The current version only emits the below error for a module (attempted to be loaded) from the `prebuilt-module-path`:
```
error: module file blabla.pcm cannot be loaded due to a configuration mismatch with the current compilation [-Wmodule-file-config-mismatch]
```
With this change, if the prebuilt module is used, we allow the proper diagnostic behind the configuration mismatch to be shown.
```
error: POSIX thread support was disabled in PCH file but is currently enabled
error: module file blabla.pcm cannot be loaded due to a configuration mismatch with the current compilation [-Wmodule-file-config-mismatch]
```
(A few lines later an error is emitted anyways, so there is no reason not to complain for configuration mismatches if a config mismatch is found and kills the build.)
Reviewed By: dblaikie
Tags: #clang
Differential Revision: https://reviews.llvm.org/D53334
llvm-svn: 346439
This reverts commit r345963. We have a path forward now.
Original commit message:
The driver accidentally stopped passing the input filenames on to -cc1
in this mode due to confusion over what action was being requested.
This change also fixes a couple of crashes I encountered when passing
multiple files to such a -cc1 invocation.
llvm-svn: 346130
Summary:
This CL adds /Zc:DllexportInlines flag to clang-cl.
When Zc:DllexportInlines- is specified, inline class member function is not exported if the function does not have local static variables.
By not exporting inline function, code for those functions are not generated and that reduces both compile time and obj size. Also this flag does not import inline functions from dllimported class if the function does not have local static variables.
On my 24C48T windows10 machine, build performance of chrome target in chromium repository is like below.
These stats are come with 'target_cpu="x86" enable_nacl = false is_component_build=true dcheck_always_on=true` build config and applied
* https://chromium-review.googlesource.com/c/chromium/src/+/1212379
* https://chromium-review.googlesource.com/c/v8/v8/+/1186017
Below stats were taken with this patch applied on a05115cd4c
| config | build time | speedup | build dir size |
| with patch, PCH on, debug | 1h10m0s | x1.13 | 35.6GB |
| without patch, PCH on, debug | 1h19m17s | | 49.0GB |
| with patch, PCH off, debug | 1h15m45s | x1.16 | 33.7GB |
| without patch, PCH off, debug | 1h28m10s | | 52.3GB |
| with patch, PCH on, release | 1h13m13s | x1.22 | 26.2GB |
| without patch, PCH on, release | 1h29m57s | | 37.5GB |
| with patch, PCH off, release | 1h23m38s | x1.32 | 23.7GB |
| without patch, PCH off, release | 1h50m50s | | 38.7GB |
This patch reduced obj size and the number of exported symbols largely, that improved link time too.
e.g. link time stats of blink_core.dll become like below
| | cold disk cache | warm disk cache |
| with patch, PCH on, debug | 71s | 30s |
| without patch, PCH on, debug | 111s | 48s |
This patch's implementation is based on Nico Weber's patch. I modified to support static local variable, added tests and took stats.
Bug: https://bugs.llvm.org/show_bug.cgi?id=33628
Reviewers: hans, thakis, rnk, javed.absar
Reviewed By: hans
Subscribers: kristof.beyls, smeenai, dschuff, probinson, cfe-commits, eraman
Differential Revision: https://reviews.llvm.org/D51340
llvm-svn: 346069
Handle it in the driver and propagate it to cc1
Reviewers: rjmccall, kcc, rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D52615
llvm-svn: 346001
target/teams/distribute regions.
Target/teams/distribute regions exist for all the time the kernel is
executed. Thus, if the variable is declared in their context and then
escape it, we can allocate global memory statically instead of
allocating it dynamically.
Patch captures all the globalized variables in target/teams/distribute
contexts, merges them into the records, one per each target region.
Those records are then joined into the union, one per compilation unit
(to save the global memory). Those units are organized into
2 x dimensional arrays, where the first dimension is
the number of blocks per SM and the second one is the number of SMs.
Runtime functions manage this global memory space between the executing
teams.
llvm-svn: 345978
This reverts commit r345803 and r345915 (a follow-up fix to r345803).
Reason: r345803 blocks our internal integrate because of the new
warnings showing up in too many places. The fix is actually correct,
we will reland it after figuring out how to integrate properly.
llvm-svn: 345963
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
-fsyntax-only.
The driver accidentally stopped passing the input filenames on to -cc1
in this mode due to confusion over what action was being requested.
This change also fixes a couple of crashes I encountered when passing
multiple files to such a -cc1 invocation.
llvm-svn: 345803
We haven't supported compiling ObjC1 for a long time (and never will again), so
there isn't any reason to keep these separate. This patch replaces
LangOpts::ObjC1 and LangOpts::ObjC2 with LangOpts::ObjC.
Differential revision: https://reviews.llvm.org/D53547
llvm-svn: 345637
Default property value 'true' preserves current behavior. Value 'false' can be
used to create VFS "root", file system that gives better control over which
files compiler can use during compilation as there are no unpredictable
accesses to real file system.
Non-fallthrough use case changes how we treat multiple VFS overlay
files. Instead of all of them being at the same level just above a real
file system, now they are nested and subsequent overlays can refer to
files in previous overlays.
Change is done both in LLVM and Clang, corresponding LLVM commit is r345431.
rdar://problem/39465552
Reviewers: bruno, benlangmuir
Reviewed By: bruno
Subscribers: dexonsmith, cfe-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D50539
llvm-svn: 345432
Summary:
- Add `UETT_PreferredAlignOf` to account for the difference between `__alignof` and `alignof`
- `AlignOfType` now returns ABI alignment instead of preferred alignment iff clang-abi-compat > 7, and one uses _Alignof or alignof
Patch by Nicole Mazzuca!
Differential Revision: https://reviews.llvm.org/D53207
llvm-svn: 345419
Add a new driver level flag `-fcf-runtime-abi=` that allows one to specify the
runtime ABI for CoreFoundation. This controls the language interoperability.
In particular, this is relevant for generating the CFConstantString classes
(primarily through the `__builtin___CFStringMakeConstantString` builtin) which
construct a reference to the "CFObject"'s `isa` field. This type differs
between swift 4.1 and 4.2+.
Valid values for the new option include:
- objc [default behaviour] - enable ObjectiveC interoperability
- swift-4.1 - enable interoperability with swift 4.1
- swift-4.2 - enable interoperability with swift 4.2
- swift-5.0 - enable interoperability with swift 5.0
- swift [alias] - target the latest swift ABI
Furthermore, swift 4.2+ changed the layout for the CFString when building
CoreFoundation *without* ObjectiveC interoperability. In such a case, a field
was added to the CFObject base type changing it from: <{ const int*, int }> to
<{ uintptr_t, uintptr_t, uint64_t }>.
In swift 5.0, the CFString type will be further adjusted to change the length
from a uint32_t on everything but BE LP64 targets to uint64_t.
Note that the default behaviour for clang remains unchanged and the new layout
must be explicitly opted into via `-fcf-runtime-abi=swift*`.
llvm-svn: 345222
'ignore-non-existent-contents' stopped working after r342232 in a way
that the actual attribute value isn't used and it works as if it is
always `true`.
Common use case for VFS iteration is iterating through files in umbrella
directories for modules. Ability to detect if some VFS entries point to
non-existing files is nice but non-critical. Instead of adding back
support for `'ignore-non-existent-contents': false` I am removing the
attribute, because such scenario isn't used widely enough and stricter
checks don't provide enough value to justify the maintenance.
rdar://problem/45176119
Reviewers: bruno
Reviewed By: bruno
Subscribers: hiraditya, dexonsmith, sammccall, cfe-commits
Differential Revision: https://reviews.llvm.org/D53228
llvm-svn: 345212
Summary: New name suggestions were being used in places where existing names should have been used, this patch tries to fix some of those situations.
Reviewers: sammccall
Reviewed By: sammccall
Subscribers: arphaman, cfe-commits
Differential Revision: https://reviews.llvm.org/D53191
llvm-svn: 345152
This patch exposes functionality added in rL344723 to the Clang driver/frontend
as a flag and adds appropriate metadata.
Driver tests pass:
```
ninja check-clang-driver
-snip-
Expected Passes : 472
Expected Failures : 3
Unsupported Tests : 65
```
Odd failure in CodeGen tests but unrelated to this:
```
ninja check-clang-codegen
-snip-
/SourceCache/llvm-trunk-8.0/tools/clang/test/CodeGen/builtins-wasm.c:87:10:
error: cannot compile this builtin function yet
-snip-
Failing Tests (1):
Clang :: CodeGen/builtins-wasm.c
Expected Passes : 1250
Expected Failures : 2
Unsupported Tests : 120
Unexpected Failures: 1
```
Original commit:
[X86] Support for the mno-tls-direct-seg-refs flag
Allows to disable direct TLS segment access (%fs or %gs). GCC supports a
similar flag, it can be useful in some circumstances, e.g. when a thread
context block needs to be updated directly from user space. More info and
specific use cases: https://bugs.llvm.org/show_bug.cgi?id=16145
Patch by nruslan (Ruslan Nikolaev).
Differential Revision: https://reviews.llvm.org/D53102
llvm-svn: 344739
This can be used to preserve profiling information across codebase
changes that have widespread impact on mangled names, but across which
most profiling data should still be usable. For example, when switching
from libstdc++ to libc++, or from the old libstdc++ ABI to the new ABI,
or even from a 32-bit to a 64-bit build.
The user can provide a remapping file specifying parts of mangled names
that should be treated as equivalent (eg, std::__1 should be treated as
equivalent to std::__cxx11), and profile data will be treated as
applying to a particular function if its name is equivalent to the name
of a function in the profile data under the provided equivalences. See
the documentation change for a description of how this is configured.
Remapping is supported for both sample-based profiling and instruction
profiling. We do not support remapping indirect branch target
information, but all other profile data should be remapped
appropriately.
Support is only added for the new pass manager. If someone wants to also
add support for this for the old pass manager, doing so should be
straightforward.
llvm-svn: 344199
This patch moves the virtual file system form clang to llvm so it can be
used by more projects.
Concretely the patch:
- Moves VirtualFileSystem.{h|cpp} from clang/Basic to llvm/Support.
- Moves the corresponding unit test from clang to llvm.
- Moves the vfs namespace from clang::vfs to llvm::vfs.
- Formats the lines affected by this change, mostly this is the result of
the added llvm namespace.
RFC on the mailing list:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/126657.html
Differential revision: https://reviews.llvm.org/D52783
llvm-svn: 344140
Summary:
gcc defines macros such as __code_model_small_ based on the user passed command line flag -mcmodel. clang accepts a flag with the same name and similar effects, but does not generate any macro that the user can use. This cl narrows the gap between gcc and clang behaviour.
However, achieving full compatibility with gcc is not trivial: The set of valid values for mcmodel in gcc and clang are not equal. Also, gcc defines different macros for different architectures. In this cl, we only tackle an easy part of the problem and define the macro only for x64 architecture. When the user does not specify a mcmodel, the macro for small code model is produced, as is the case with gcc.
Reviewers: compnerd, MaskRay
Reviewed By: MaskRay
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D52920
llvm-svn: 344000
Summary: Its job is covered by -ast-dump. The option is rarely used and lacks many AST nodes which will lead to llvm_unreachable() crash.
Reviewers: rsmith, arphaman
Reviewed By: rsmith
Subscribers: jfb, cfe-commits
Differential Revision: https://reviews.llvm.org/D52529
llvm-svn: 343660
This patch renames -f{no-}cuda-rdc to -f{no-}gpu-rdc and keeps the original
options as aliases. When -fgpu-rdc is off,
clang will assume the device code in each translation unit does not call
external functions except those in the device library, therefore it is possible
to compile the device code in each translation unit to self-contained kernels
and embed them in the host object, so that the host object behaves like
usual host object which can be linked by lld.
The benefits of this feature is: 1. allow users to create static libraries which
can be linked by host linker; 2. amortized device code linking time.
This patch modifies HIP action builder to insert actions for linking device
code and generating HIP fatbin, and pass HIP fatbin to host backend action.
It extracts code for constructing command for generating HIP fatbin as
a function so that it can be reused by early finalization. It also modifies
codegen of HIP host constructor functions to embed the device fatbin
when it is available.
Differential Revision: https://reviews.llvm.org/D52377
llvm-svn: 343611
There are a few leftovers of rC343147 that are not (\w+)\.begin but in
the form of ([-[:alnum:]>.]+)\.begin or spanning two lines. Change them
to use the container form in this commit. The 12 occurrences have been
inspected manually for safety.
llvm-svn: 343425
Dumping graphs instead of opening them is often very useful,
e.g. for transfer or converting to SVG.
Basic sanity check for generated exploded graphs.
Differential Revision: https://reviews.llvm.org/D52637
llvm-svn: 343352
The existing conditions are not consistent. Some have braces and define a temporary Decl while others simply call `<< *cast<XXXDecl>(I)` (mostly the NamedDecl overload of operator<<).
Just use the latter for consistency and brevity.
llvm-svn: 343072
This adds a preprocessor callback for the `__has_include` and
`__has_include_next` directives.
Successful checking for the presence of a header should add it to the list of
header dependencies so this overrides the callback in the dependency scanner.
Patch by Pete Cooper with some additions by me.
rdar://problem/39545636
Differential Revision: https://reviews.llvm.org/D30882
llvm-svn: 342517
Summary:
The dir component ("somedir" in #include <somedir/fo...>) is considered fixed.
We append "foo" to each directory on the include path, and then list its files.
Completions are of the forms:
#include <somedir/fo^
foo.h>
fox/
The filter is set to the filename part ("fo"), so fuzzy matching can be
applied to the filename only.
No fancy scoring/priorities are set, and no information is added to
CodeCompleteResult to make smart scoring possible. Could be in future.
Reviewers: ilya-biryukov
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D52076
llvm-svn: 342449
Summary:
Most callers I can find are using only `getName()`. Type is used by the
recursive iterator.
Now we don't have to call stat() on every listed file (on most platforms).
Exceptions are e.g. Solaris where readdir() doesn't include type information.
On those platforms we'll still stat() - see D51918.
The result is significantly faster (stat() can be slow).
My motivation: this may allow us to improve clang IO on large TUs with long
include search paths. Caching readdir() results may allow us to skip many stat()
and open() operations on nonexistent files.
Reviewers: bkramer
Subscribers: fedor.sergeev, cfe-commits
Differential Revision: https://reviews.llvm.org/D51921
llvm-svn: 342232
With clang-cl, when the user specifies /Yc or /Yu without a filename
the compiler uses a #pragma hdrstop in the main source file to
determine the end of the PCH. If a header is specified with /Yc or
/Yu #pragma hdrstop has no effect.
The optional #pragma hdrstop filename argument is not yet supported.
Differential Revision: https://reviews.llvm.org/D51391
llvm-svn: 341963
Fix a bug in the deserialization of IMPORTS section and allow for
imported modules to also be printed with -module-file-info.
rdar://problem/43867753
llvm-svn: 341902
Boilerplate code for using KMSAN instrumentation in Clang.
We add a new command line flag, -fsanitize=kernel-memory, with a
corresponding SanitizerKind::KernelMemory, which, along with
SanitizerKind::Memory, maps to the memory_sanitizer feature.
KMSAN is only supported on x86_64 Linux.
It's incompatible with other sanitizers, but supports code coverage
instrumentation.
llvm-svn: 341641
Ubigraph project has been dead since about 2008, and to the best of my
knowledge, no one was using it.
Previously, I wasn't able to launch the existing binary at all.
Differential Revision: https://reviews.llvm.org/D51655
llvm-svn: 341601
destructors.
We previously tried to patch up the exception specification after
completing the class, which went wrong when the exception specification
was needed within the class body (in particular, by a friend
redeclaration of the destructor in a nested class). We now mark the
destructor as having a not-yet-computed exception specification
immediately after creating it.
This requires delaying various checks against the exception
specification (where we'd previously have just got the wrong exception
specification, and now find we have an exception specification that we
can't compute yet) when those checks fire while the class is being
defined.
This also exposed an issue that we were missing a CodeSynthesisContext
for computation of exception specifications (otherwise we'd fail to make
the module containing the definition of the class visible when computing
its members' exception specs). Adding that incidentally also gives us a
diagnostic quality improvement.
This has also exposed an pre-existing problem: making the exception
specification evaluation context a non-SFINAE context (as it should be)
results in a bootstrap failure; PR38850 filed for this.
llvm-svn: 341499
Load Hardening.
Wires up the existing pass to work with a proper IR attribute rather
than just a hidden/internal flag. The internal flag continues to work
for now, but I'll likely remove it soon.
Most of the churn here is adding the IR attribute. I talked about this
Kristof Beyls and he seemed at least initially OK with this direction.
The idea of using a full attribute here is that we *do* expect at least
some forms of this for other architectures. There isn't anything
*inherently* x86-specific about this technique, just that we only have
an implementation for x86 at the moment.
While we could potentially expose this as a Clang-level attribute as
well, that seems like a good question to defer for the moment as it
isn't 100% clear whether that or some other programmer interface (or
both?) would be best. We'll defer the programmer interface side of this
for now, but at least get to the point where the feature can be enabled
without relying on implementation details.
This also allows us to do something that was really hard before: we can
enable *just* the indirect call retpolines when using SLH. For x86, we
don't have any other way to mitigate indirect calls. Other architectures
may take a different approach of course, and none of this is surfaced to
user-level flags.
Differential Revision: https://reviews.llvm.org/D51157
llvm-svn: 341363
Summary:
Added option -gline-directives-only to support emission of the debug directives
only. It behaves very similar to -gline-tables-only, except that it sets
llvm debug info emission kind to
llvm::DICompileUnit::DebugDirectivesOnly.
Reviewers: echristo
Subscribers: aprantl, fedor.sergeev, JDevlieghere, cfe-commits
Differential Revision: https://reviews.llvm.org/D51177
llvm-svn: 341212
The changes were breaking CUDA compilation.
Reverted revisions:
r340681 D50845
[CUDA/OpenMP] Define only some host macros during device compilation
r340772 D51312
[OpenMP][NVPTX] Use appropriate _CALL_ELF macro when offloading
r340967 D51441
Add predefined macro __gnu_linux__ for proper aux-triple
llvm-svn: 341115
Clang predefine macro __linx__ for aux-triple with Linux OS
but does not predefine macro __gnu_linux__. This causes
some compilation error for certain applications, e.g. Eigen.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D51441
llvm-svn: 340967
Summary: When offloading to a device and using the powerpc64le version of the auxiliary triple, the _CALL_ELF macro is not set correctly to 2 resulting in the attempt to include a header that does not exist. This patch fixes this problem.
Reviewers: Hahnfeld, ABataev, caomhin
Reviewed By: Hahnfeld
Subscribers: guansong, cfe-commits
Differential Revision: https://reviews.llvm.org/D51312
llvm-svn: 340772
When compiling CUDA or OpenMP device code Clang parses header files
that expect certain predefined macros from the host architecture. To
make this work the compiler passes the host triple via the -aux-triple
argument and (until now) pulls in all macros for that "auxiliary triple"
unconditionally.
However this results in defines like __SSE_MATH__ that will trigger
inline assembly making use of the "advertised" target features. See
the discussion of D47849 and PR38464 for a detailed explanation of
the encountered problems.
Instead of blacklisting "known bad" examples this patch starts adding
defines that are needed for certain headers like bits/wordsize.h and
bits/mathinline.h.
The disadvantage of this approach is that it decouples the definitions
from their target toolchain. However in my opinion it's more important
to keep definitions for one header close together. For one this will
include a clear documentation why these particular defines are needed.
Furthermore it simplifies maintenance because adding defines for a new
header or support for a new aux-triple only needs to touch one piece
of code.
Differential Revision: https://reviews.llvm.org/D50845
llvm-svn: 340681
constants by default when there is no optimization.
GCC's option -fno-keep-static-consts can be used to not emit
unused static constants.
In Clang, since default behavior does not keep unused static constants,
-fkeep-static-consts can be used to emit these if required. This could be
useful for producing identification strings like SVN identifiers
inside the object file even though the string isn't used by the program.
Differential Revision: https://reviews.llvm.org/D40925
llvm-svn: 340439
This commit adds the flag -fno-c++-static-destructors and the attributes
[[clang::no_destroy]] and [[clang::always_destroy]]. no_destroy specifies that a
specific static or thread duration variable shouldn't have it's destructor
registered, and is the default in -fno-c++-static-destructors mode.
always_destroy is the opposite, and is the default in -fc++-static-destructors
mode.
A variable whose destructor is disabled (either because of
-fno-c++-static-destructors or [[clang::no_destroy]]) doesn't count as a use of
the destructor, so we don't do any access checking or mark it referenced. We
also don't emit -Wexit-time-destructors for these variables.
rdar://21734598
Differential revision: https://reviews.llvm.org/D50994
llvm-svn: 340306
This changes the current default behavior (from emitting pubnames by
default, to not emitting them by default) & moves to matching GCC's
behavior* with one significant difference: -gno(-gnu)-pubnames disables
pubnames even in the presence of -gsplit-dwarf (though -gsplit-dwarf
still by default enables -ggnu-pubnames). This allows users to disable
pubnames (& the new DWARF5 accelerated access tables) when they might
not be worth the size overhead.
* GCC's behavior is that -ggnu-pubnames and -gpubnames override each
other, and that -gno-gnu-pubnames and -gno-pubnames act as synonyms and
disable either kind of pubnames if they come last. (eg: -gpubnames
-gno-gnu-pubnames causes no pubnames (neither gnu or standard) to be
emitted)
llvm-svn: 340206
Summary:
Empty preamble is valid for source file which doesn't have any
preprocessor and #includes.
This patch makes clang treat an empty preamble as a normal preamble.
Check: ninja check-clang
A testcase is added in https://reviews.llvm.org/D50627.
Reviewers: ilya-biryukov
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D50628
llvm-svn: 340029
- Add a command line options -msign-return-address to enable return address
signing
- Armv8.3a added instructions to sign the return address to help mitigate
against ROP attacks
- This patch adds command line options to generate function attributes that
signal to the back whether return address signing instructions should be
added
Differential revision: https://reviews.llvm.org/D49793
llvm-svn: 340019
LLVM triple normalization is handling "unknown" and empty components
differently; for example given "x86_64-unknown-linux-gnu" and
"x86_64-linux-gnu" which should be equivalent, triple normalization
returns "x86_64-unknown-linux-gnu" and "x86_64--linux-gnu". autoconf's
config.sub returns "x86_64-unknown-linux-gnu" for both
"x86_64-linux-gnu" and "x86_64-unknown-linux-gnu". This changes the
triple normalization to behave the same way, replacing empty triple
components with "unknown".
This addresses PR37129.
Differential Revision: https://reviews.llvm.org/D50219
llvm-svn: 339294
Libc++ needs to know when aligned allocation is supported by clang, but is
otherwise unavailable at link time. Otherwise, libc++ will incorrectly end up
generating calls to `__builtin_operator_new`/`__builtin_operator_delete` with
alignment arguments.
This patch implements the following changes:
* The `__cpp_aligned_new` feature test macro to no longer be defined when
aligned allocation is otherwise enabled but unavailable.
* The Darwin driver no longer passes `-faligned-alloc-unavailable` when the
user manually specifies `-faligned-allocation` or `-fno-aligned-allocation`.
* Instead of a warning Clang now generates a hard error when an aligned
allocation or deallocation function is referenced but unavailable.
Patch by Eric Fiselier.
Reviewers: rsmith, vsapsai, erik.pilkington, ahatanak, dexonsmith
Reviewed By: rsmith
Subscribers: Quuxplusone, cfe-commits
Differential Revision: https://reviews.llvm.org/D45015
llvm-svn: 338934
Consider:
1) Generate PCH with -fmodules and -fmodule-map-file
2) Use PCH with -fmodules and the same -fmodule-map-file
If we don't load -fmodule-map-file content before including PCHs,
the modules that are dependencies in PCHs cannot get loaded,
since there's no matching module map file when reading back the AST.
rdar://problem/40852867
Differential Revision: https://reviews.llvm.org/D48685
llvm-svn: 337447
Summary:
Support for this option is needed for building Linux kernel.
This is a very frequently requested feature by kernel developers.
More details : https://lkml.org/lkml/2018/4/4/601
GCC option description for -fdelete-null-pointer-checks:
This Assume that programs cannot safely dereference null pointers,
and that no code or data element resides at address zero.
-fno-delete-null-pointer-checks is the inverse of this implying that
null pointer dereferencing is not undefined.
This feature is implemented in as the function attribute
"null-pointer-is-valid"="true".
This CL only adds the attribute on the function.
It also strips "nonnull" attributes from function arguments but
keeps the related warnings unchanged.
Corresponding LLVM change rL336613 already updated the
optimizations to not treat null pointer dereferencing
as undefined if the attribute is present.
Reviewers: t.p.northover, efriedma, jyknight, chandlerc, rnk, srhines, void, george.burgess.iv
Reviewed By: jyknight
Subscribers: drinkcat, xbolva00, cfe-commits
Differential Revision: https://reviews.llvm.org/D47894
llvm-svn: 337433
Summary:
Reproducer and errors:
https://bugs.llvm.org/show_bug.cgi?id=37878
lookupModule was falling back to loadSubdirectoryModuleMaps when it couldn't
find ModuleName in (proper) search paths. This was causing iteration over all
files in the search path subdirectories for example "/usr/include/foobar" in
bugzilla case.
Users don't expect Clang to load modulemaps in subdirectories implicitly, and
also the disk access is not cheap.
if (AllowExtraModuleMapSearch) true with ObjC with @import ModuleName.
Reviewers: rsmith, aprantl, bruno
Subscribers: cfe-commits, teemperor, v.g.vassilev
Differential Revision: https://reviews.llvm.org/D48367
llvm-svn: 337430
This patch improves traceability of duplicated header files which end
up in multiple pcms.
Differential Revision: https://reviews.llvm.org/D47118
llvm-svn: 337353
which was reverted in r337336.
The problem that required a revert was fixed in r337338.
Also added a missing "REQUIRES: x86-registered-target" to one of
the tests.
Original commit message:
> Teach Clang to emit address-significance tables.
>
> By default, we emit an address-significance table on all ELF
> targets when the integrated assembler is enabled. The emission of an
> address-significance table can be controlled with the -faddrsig and
> -fno-addrsig flags.
>
> Differential Revision: https://reviews.llvm.org/D48155
llvm-svn: 337339
Causing multiple failures on sanitizer bots due to TLS symbol errors,
e.g.
/usr/bin/ld: __msan_origin_tls: TLS definition in /home/buildbots/ppc64be-clang-test/clang-ppc64be/stage1/lib/clang/7.0.0/lib/linux/libclang_rt.msan-powerpc64.a(msan.cc.o) section .tbss.__msan_origin_tls mismatches non-TLS reference in /tmp/lit_tmp_0a71tA/mallinfo-3ca75e.o
llvm-svn: 337336
By default, we emit an address-significance table on all ELF
targets when the integrated assembler is enabled. The emission of an
address-significance table can be controlled with the -faddrsig and
-fno-addrsig flags.
Differential Revision: https://reviews.llvm.org/D48155
llvm-svn: 337333
Summary: Add a flag `-fno-digraphs` to disable digraphs in the lexer, similar to `-fno-operator-names` which disables alternative names for C++ operators.
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: rsmith, cfe-commits
Differential Revision: https://reviews.llvm.org/D48266
llvm-svn: 337232
Summary:
Reproducer and errors:
https://bugs.llvm.org/show_bug.cgi?id=37878
lookupModule was falling back to loadSubdirectoryModuleMaps when it couldn't
find ModuleName in (proper) search paths. This was causing iteration over all
files in the search path subdirectories for example "/usr/include/foobar" in
bugzilla case.
Users don't expect Clang to load modulemaps in subdirectories implicitly, and
also the disk access is not cheap.
if (AllowExtraModuleMapSearch) true with ObjC with @import ModuleName.
Reviewers: rsmith, aprantl, bruno
Subscribers: cfe-commits, teemperor, v.g.vassilev
Differential Revision: https://reviews.llvm.org/D48367
llvm-svn: 336660
Summary:
PrecompiledPreamble hasn't checked if the system dependencies changed
before. This resulted in invalid preamble not being rebuilt if headers
that changed were found in -isystem include paths.
This pattern is sometimes used to avoid showing warnings in third
party code, so we want to correctly handle those cases.
Tested in clangd, see the follow-up patch.
Reviewers: sammccall, ioeric
Reviewed By: sammccall
Subscribers: omtcyfz, cfe-commits
Differential Revision: https://reviews.llvm.org/D48946
llvm-svn: 336528
Implement support for MS-style PCH through headers.
This enables support for /Yc and /Yu where the through header is either
on the command line or included in the source. It replaces the current
support the requires the header also be specified with /FI.
This change adds a -cc1 option -pch-through-header that is used to either
start or stop compilation during PCH create or use.
When creating a PCH, the compilation ends after compilation of the through
header.
When using a PCH, tokens are skipped until after the through header is seen.
Patch By: mikerice
Differential Revision: https://reviews.llvm.org/D46652
llvm-svn: 336379
- Rename the `-fsame-fbits` flag to `-fpadding-on-unsigned-fixed-point`
- Move the flag from a driver option to a cc1 option
- Rename the `SameFBits` member in TargetInfo to `PaddingOnUnsignedFixedPoint`
- Updated descriptions
Differential Revision: https://reviews.llvm.org/D48727
llvm-svn: 335993
The new C++ stdlib warning added in r335081 gets
triggered when compiling an assembly file with -x assembler-with-cpp.
This commit ensures that the C++ stdlib is not included when compiling assembly.
In general, it's not really useful to include the C++ stdlib search path when
compiling assembly source.
rdar://41359632
Differential Revision: https://reviews.llvm.org/D48736
llvm-svn: 335940
With MSVC, PCH files are created along with an object file that needs to
be linked into the final library or executable. That object file
contains the code generated when building the headers. In particular, it
will include definitions of inline dllexport functions, and because they
are emitted in this object file, other files using the PCH do not need
to emit them. See the bug for an example.
This patch makes clang-cl match MSVC's behaviour in this regard, causing
significant compile-time savings when building dlls using precompiled
headers.
For example, in a 64-bit optimized shared library build of Chromium with
PCH, it reduces the binary size and compile time of
stroke_opacity_custom.obj from 9315564 bytes to 3659629 bytes and 14.6
to 6.63 s. The wall-clock time of building blink_core.dll goes from
38m41s to 22m33s. ("user" time goes from 1979m to 1142m).
Differential Revision: https://reviews.llvm.org/D48426
llvm-svn: 335466
Since we are now producing a summary also for regular LTO builds, we
need to run the NameAnonGlobals pass in those cases as well (the
summary cannot handle anonymous globals).
See https://reviews.llvm.org/D34156 for details on the original change.
This reverts commit 6c9ee4a4a438a8059aacc809b2dd57128fccd6b3.
llvm-svn: 335385
This is breaking a couple of buildbots. We need to run the
NameAnonGlobal pass for regular LTO now as well (since we're producing a
summary). I'll post a separate patch for review to make this happen and
then re-commit.
This reverts commit c0759b7b1f4a81ff9021b952aa38a222d5fa4dfd.
llvm-svn: 335291
Summary:
With D33921, we gained the ability to have module summaries in regular
LTO modules without triggering ThinLTO compilation. Module summaries in
regular LTO allow garbage collection (dead stripping) before LTO
compilation and thus open up additional optimization opportunities.
This patch enables summary emission in regular LTO for all targets
except ld64-based ones (which use the legacy LTO API).
Reviewers: pcc, tejohnson, mehdi_amini
Subscribers: inglorion, eraman, cfe-commits
Differential Revision: https://reviews.llvm.org/D34156
llvm-svn: 335284
This diff includes the logic for setting the precision bits for each primary fixed point type in the target info and logic for initializing a fixed point literal.
Fixed point literals are declared using the suffixes
```
hr: short _Fract
uhr: unsigned short _Fract
r: _Fract
ur: unsigned _Fract
lr: long _Fract
ulr: unsigned long _Fract
hk: short _Accum
uhk: unsigned short _Accum
k: _Accum
uk: unsigned _Accum
```
Errors are also thrown for illegal literal values
```
unsigned short _Accum u_short_accum = 256.0uhk; // expected-error{{the integral part of this literal is too large for this unsigned _Accum type}}
```
Differential Revision: https://reviews.llvm.org/D46915
llvm-svn: 335148
The recommit ensures that the tests that failed on bots don't trigger the warning.
Xcode 10 removes support for libstdc++, but the users just get a confusing
include not file warning when including an STL header (when building for iOS6
which uses libstdc++ by default for example).
This patch adds a new warning that lets the user know that the libstdc++ include
path was not found to ensure that the user is more aware of why the error occurs.
rdar://40830462
Differential Revision: https://reviews.llvm.org/D48297
llvm-svn: 335081
Xcode 10 removes support for libstdc++, but the users just get a confusing
include not file warning when including an STL header (when building for iOS6
which uses libstdc++ by default for example).
This patch adds a new warning that lets the user know that the libstdc++ include
path was not found to ensure that the user is more aware of why the error occurs.
rdar://40830462
Differential Revision: https://reviews.llvm.org/D48297
llvm-svn: 335063
ASTImporter tests may produce source file related warnings, the diagnostic
client should be in correct state to handle it. Added 'beginSourceFile' to set
the client state.
Patch by: Balázs Kéri
Differential Revision: https://reviews.llvm.org/D47445
llvm-svn: 334804
Summary:
In many cases we can't devirtualize
because definition of vtable is not present. Most of the
time it is caused by inline virtual function not beeing
emitted. Forcing emitting of vtable adds a reference of these
inline virtual functions.
Note that GCC was always doing it.
Reviewers: rjmccall, rsmith, amharc, kuhar
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D47108
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
llvm-svn: 334600
Summary:
This kind of functionality is useful to other project apart from clang.
LLDB works with version numbers a lot, but it does not have a convenient
abstraction for this. Moving this class to a lower level library allows
it to be freely used within LLDB.
Since this class is used in a lot of places in clang, and it used to be
in the clang namespace, it seemed appropriate to add it to the list of
adopted classes in LLVM.h to avoid prefixing all uses with "llvm::".
Also, I didn't find any tests specific for this class, so I wrote a
couple of quick ones for the more interesting bits of functionality.
Reviewers: zturner, erik.pilkington
Subscribers: mgorny, cfe-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D47887
llvm-svn: 334399
The windows-msvc target is used for MSVC ABI compatibility, including
the exceptions model. It doesn't make sense to pair a windows-msvc
target with a non-MSVC exception model. This would previously cause an
assertion failure; explicitly error out for it in the frontend instead.
This also allows us to reduce the matrix of target/exception models a
bit (see the modified tests), and we can possibly simplify some of the
personality code in a follow-up.
Differential Revision: https://reviews.llvm.org/D47853
llvm-svn: 334243
Do not memory map the main file if the flag UserFilesAreVolatile is set to true
in ASTUnit when calling FileSystem::getBufferForFile.
Differential Revision: https://reviews.llvm.org/D47460
llvm-svn: 334070
// Primary fixed point types
signed short _Accum s_short_accum;
signed _Accum s_accum;
signed long _Accum s_long_accum;
unsigned short _Accum u_short_accum;
unsigned _Accum u_accum;
unsigned long _Accum u_long_accum;
// Aliased fixed point types
short _Accum short_accum;
_Accum accum;
long _Accum long_accum;
This diff only allows for declaration of the fixed point types. Assignment and other operations done on fixed point types according to http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1169.pdf will be added in future patches. The saturated versions of these types and the equivalent _Fract types will also be added in future patches.
The tests included are for asserting that we can declare these types.
Fixed the test that was failing by not checking for dso_local on some
targets.
Differential Revision: https://reviews.llvm.org/D46084
llvm-svn: 333923
```
// Primary fixed point types
signed short _Accum s_short_accum;
signed _Accum s_accum;
signed long _Accum s_long_accum;
unsigned short _Accum u_short_accum;
unsigned _Accum u_accum;
unsigned long _Accum u_long_accum;
// Aliased fixed point types
short _Accum short_accum;
_Accum accum;
long _Accum long_accum;
```
This diff only allows for declaration of the fixed point types. Assignment and other operations done on fixed point types according to http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1169.pdf will be added in future patches. The saturated versions of these types and the equivalent `_Fract` types will also be added in future patches.
The tests included are for asserting that we can declare these types.
Differential Revision: https://reviews.llvm.org/D46084
llvm-svn: 333814
Add the ability to dump compiler option-related information to a JSON file via the -compiler-options-dump option. Specifically, it dumps the features/extensions lists -- however, this output could be extended to other information should it be useful. In order to support features and extensions, I moved them into a .def file so that we could build the various lists we care about from them without a significant increase in maintenance burden.
llvm-svn: 333653
Codebases that need to be compatible with the Microsoft ABI can pass
this flag to avoid issues caused by the lack of a fixed ABI for
incomplete member pointers.
Differential Revision: https://reviews.llvm.org/D47503
llvm-svn: 333498
Summary:
This commit fixes a bug where passing extra dependency entries
(using -fdepfile-entry) would result in -MP incorrectly emitting
a phony target for the input file, and no phony target for the
first extra dependency.
The extra dependencies are added first to the filename vector in
DFGImpl. That clashed with the emission of the phony targets, as
the code assumed that the first index always correspond to the
input file.
Reviewers: rsmith, pcc, krasin, bruno, vsapsai
Reviewed By: vsapsai
Subscribers: vsapsai, bruno, cfe-commits
Differential Revision: https://reviews.llvm.org/D44568
llvm-svn: 333413
The return value of sys::getDefaultTargetTriple, which is derived from
-DLLVM_DEFAULT_TRIPLE, is used to construct tool names, default target,
and in the future also to control the search path directly; as such it
should be used textually, without interpretation by LLVM.
Normalization of this value may lead to unexpected results, for example
if we configure LLVM with -DLLVM_DEFAULT_TARGET_TRIPLE=x86_64-linux-gnu,
normalization will transform that value to x86_64--linux-gnu. Driver will
use that value to search for tools prefixed with x86_64--linux-gnu- which
may be confusing. This is also inconsistent with the behavior of the
--target flag which is taken as-is without any normalization and overrides
the value of LLVM_DEFAULT_TARGET_TRIPLE.
Users of sys::getDefaultTargetTriple already perform their own
normalization as needed, so this change shouldn't impact existing logic.
Differential Revision: https://reviews.llvm.org/D47153
llvm-svn: 333307
Currently getting such completions requires source correction, reparsing
and calling completion again. And if it shows no results and rollback is
required then it costs one more reparse.
With this change it's possible to get all results which can be later
filtered to split changes which require correction.
Differential Revision: https://reviews.llvm.org/D41537
llvm-svn: 333272
Unless the user uses -Wno-module-file-config-mismatch (or -Wno-error=...),
allow the AST reader to produce errors describing the nature of the config
mismatch.
llvm-svn: 333220
Summary:
This includes initial support for the (hopefully final) updated Objective-C ABI, developed here:
https://github.com/davidchisnall/clang-gnustep-abi-2
It also includes some cleanups and refactoring from older GNU ABIs.
The current version is ELF only, other formats to follow.
Reviewers: rjmccall, DHowett-MSFT
Reviewed By: rjmccall
Subscribers: smeenai, cfe-commits
Differential Revision: https://reviews.llvm.org/D46052
llvm-svn: 332950
if `-fopenmp-simd` is specified alone, `_OPENMP` macro should not be
defined. If `-fopenmp-simd` is specified along with the `-fopenmp`,
`_OPENMP` macro should be defined with the value `201511`.
llvm-svn: 332852
This is useful to understand and debug the lazy template specializations
used in the pch and modules.
Differential Revision: https://reviews.llvm.org/D41785
llvm-svn: 332817
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
The return value of sys::getDefaultTargetTriple, which is derived from
-DLLVM_DEFAULT_TRIPLE, is used to construct tool names, default target,
and in the future also to control the search path directly; as such it
should be used textually, without interpretation by LLVM.
Normalization of this value may lead to unexpected results, for example
if we configure LLVM with -DLLVM_DEFAULT_TARGET_TRIPLE=x86_64-linux-gnu,
normalization will transform that value to x86_64--linux-gnu. Driver will
use that value to search for tools prefixed with x86_64--linux-gnu- which
may be confusing. This is also inconsistent with the behavior of the
--target flag which is taken as-is without any normalization and overrides
the value of LLVM_DEFAULT_TARGET_TRIPLE.
Users of sys::getDefaultTargetTriple already perform their own
normalization as needed, so this change shouldn't impact existing logic.
Differential Revision: https://reviews.llvm.org/D46910
llvm-svn: 332750
in gcc by https://gcc.gnu.org/ml/gcc-cvs/2018-04/msg00534.html.
The -mibt feature flag is being removed, and the -fcf-protection
option now also defines a CET macro and causes errors when used
on non-X86 targets, while X86 targets no longer check for -mibt
and -mshstk to determine if -fcf-protection is supported. -mshstk
is now used only to determine availability of shadow stack intrinsics.
Comes with an LLVM patch (D46882).
Patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D46881
llvm-svn: 332704
Second attempt. Fix line endings and warning.
As an addition to CXTranslationUnit_SkipFunctionBodies, provide the
new option CXTranslationUnit_LimitSkipFunctionBodiesToPreamble,
which constraints the skipping of functions bodies to the preamble
only. Function bodies in the main file are not affected if this
option is set.
Skipping function bodies only in the preamble is what clangd already
does and the introduced flag implements it for libclang clients.
Patch by Nikolai Kosjar.
Differential Revision: https://reviews.llvm.org/D45815
llvm-svn: 332587
Second attempt. Proper line endings.
The parsing that is done for code completion is a special case that will
discard any generated diagnostics, so avoid running plugins for this
case in the first place to avoid performance penalties due to the
plugins.
A scenario for this is for example libclang with extra plugins like tidy.
Patch by Nikolai Kosjar
Differential Revision: https://reviews.llvm.org/D46050
llvm-svn: 332586
As an addition to CXTranslationUnit_SkipFunctionBodies, provide the
new option CXTranslationUnit_LimitSkipFunctionBodiesToPreamble,
which constraints the skipping of functions bodies to the preamble
only. Function bodies in the main file are not affected if this
option is set.
Skipping function bodies only in the preamble is what clangd already
does and the introduced flag implements it for libclang clients.
Patch by Nikolai Kosjar.
Differential Revision: https://reviews.llvm.org/D45815
llvm-svn: 332578
The parsing that is done for code completion is a special case that will
discard any generated diagnostics, so avoid running plugins for this
case in the first place to avoid performance penalties due to the
plugins.
A scenario for this is for example libclang with extra plugins like tidy.
Patch by Nikolai Kosjar
Differential Revision: https://reviews.llvm.org/D46050
llvm-svn: 332469
For example, given:
#define bool _Bool
_Bool i;
void fn() { 1; }
-ast-print produced:
tmp.c:3:13: warning: expression result unused
void fn() { 1; }
^
bool i;
void fn() {
1;
}
That fails to compile because bool is undefined.
Details:
Diagnostics print _Bool as bool when the latter is defined as the
former. However, diagnostics were altering the printing policy for
-ast-print as well. The printed source was then invalid because the
preprocessor eats the bool definition.
Problematic diagnostics included suppressed warnings (e.g., add
-Wno-unused-value to the above example), including those that are
suppressed by default.
This patch fixes this bug and cleans up some related comments.
Reviewed by: aaron.ballman, rsmith
Differential Revision: https://reviews.llvm.org/D45093
llvm-svn: 332275
The PS4 requires clang ABI version 6 for compatibility reasons. This change forces this and if the user specifies a different version when the PS4 target is specified, the compiler emits a warning that the specified version is being ignored.
Reviewers: probinson
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D46767
llvm-svn: 332160
This commit relands r331904.
Adding a SrcMgr::CharacteristicKind parameter to the InclusionDirective
in PPCallbacks, and updating calls to that function. This will be useful
in https://reviews.llvm.org/D43778 to determine which includes are
system
headers.
Differential Revision: https://reviews.llvm.org/D46614
llvm-svn: 332021
The option enables use of 32-bit pointers for accessing
const/local/shared memory. The feature is disabled by default.
Differential Revision: https://reviews.llvm.org/D46148
llvm-svn: 331938
Adding a SrcMgr::CharacteristicKind parameter to the InclusionDirective
in PPCallbacks, and updating calls to that function. This will be useful
in https://reviews.llvm.org/D43778 to determine which includes are system
headers.
Differential Revision: https://reviews.llvm.org/D46614
llvm-svn: 331904
Restrict the following keywords in the OpenCL C++ language mode,
according to Sections 2.2 & 2.9 of the OpenCL C++ 1.0 Specification.
- dynamic_cast
- typeid
- register (already restricted in OpenCL C, update the diagnostic)
- thread_local
- exceptions (try/catch/throw)
- access qualifiers read_only, write_only, read_write
Support the `__global`, `__local`, `__constant`, `__private`, and
`__generic` keywords in OpenCL C++. Leave the unprefixed address
space qualifiers such as global available, i.e., do not mark them as
reserved keywords in OpenCL C++. libclcxx provides explicit address
space pointer classes such as `global_ptr` and `global<T>` that are
implemented using the `__`-prefixed qualifiers.
Differential Revision: https://reviews.llvm.org/D46022
llvm-svn: 331874
This is similar to the LLVM change https://reviews.llvm.org/D46290.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46320
llvm-svn: 331834
Generate a printable OpenCL language version number in a single place
and select between the OpenCL C or OpenCL C++ version accordingly.
Differential Revision: https://reviews.llvm.org/D46382
llvm-svn: 331766
Summary:
Passes down the necessary code ge options to the LTO Config to enable
-fdiagnostics-show-hotness and -fsave-optimization-record in the ThinLTO
backend for a distributed build.
Also, remove warning about not having PGO when the input is IR.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, cfe-commits
Differential Revision: https://reviews.llvm.org/D46464
llvm-svn: 331592
This replicates 'cl.exe' behavior and allows for both preprocessor output and
dependency information to be extraced with a single compiler invocation.
This is especially useful for compiler caching with tools like Mozilla's sccache.
See: https://github.com/mozilla/sccache/issues/246
Patch By: fxb
Differential Revision: https://reviews.llvm.org/D46394
llvm-svn: 331533
enabled for the host.
If the compilation for the host enables C++ exceptions, but they are not
supported by the device, we still need to allow the code with the
exception handling constructs outside of the target regions.
llvm-svn: 331372
A @import targeting a top level module from a private module map file
(@import Foo_Private), would fail if there's any submodule declaration
around (module Foo.SomeSub) in the same private module map.
This happens because compileModuleImpl, when building Foo_Private, will
start with the private module map and will not parse the public one,
which leads to unsuccessful parsing of Foo.SomeSub, since top level Foo
was never parsed.
Declaring other submodules in the private module map is not common and
should usually be avoided, but it shouldn't fail to build. Canonicalize
compileModuleImpl to always look at the public module first, so that all
necessary information is available when parsing the private one.
rdar://problem/39822328
llvm-svn: 331322
It's possible for a header to be a symlink to another header. In this
case both will be represented by clang::FileEntry with the same UID and
they'll use the same clang::HeaderFileInfo.
If you include both headers and use some single-inclusion mechanism
like a header guard or #import, one header will get a FileChanged
callback, and another FileSkipped.
So that we get an accurate dependency file, we therefore need to also
implement the FileSkipped callback in dependency scanning.
Patch by Pete Cooper.
Reviewers: bruno, pete
Reviewed By: bruno
Subscribers: cfe-commits, jkorous, vsapsai
Differential Revision: https://reviews.llvm.org/D30881
llvm-svn: 331319
This is not yet part of any C++ working draft, and so is controlled by the flag
-fchar8_t rather than a -std= flag. (The GCC implementation is controlled by a
flag with the same name.)
This implementation is experimental, and will be removed or revised
substantially to match the proposal as it makes its way through the C++
committee.
llvm-svn: 331244
As suggested in the post-commit thread for rL331056, we should match these
clang options with the established vocabulary of the corresponding sanitizer
option. Also, the use of 'strict' is well-known for these kinds of knobs,
and we can improve the descriptive text in the docs.
So this intends to match the logic of D46135 but only change the words.
Matching LLVM commit to match this spelling of the attribute to follow shortly.
Differential Revision: https://reviews.llvm.org/D46236
llvm-svn: 331209
When a '>>' token is split into two '>' tokens (in C++11 onwards), or (as an
extension) when we do the same for other tokens starting with a '>', we can't
just use a location pointing to the first '>' as the location of the split
token, because that would result in our miscomputing the length and spelling
for the token. As a consequence, for example, a refactoring replacing 'A<X>'
with something else would sometimes replace one character too many, and
similarly diagnostics highlighting a template-id source range would highlight
one character too many.
Fix this by creating an expansion range covering the first character of the
'>>' token, whose spelling is '>'. For this to work, we generalize the
expansion range of a macro FileID to be either a token range (the common case)
or a character range (used in this new case).
llvm-svn: 331155
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
llvm-svn: 331069
As discussed in the post-commit thread for:
rL330437 ( http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20180423/545906.html )
We need a way to opt-out of a float-to-int-to-float cast optimization because too much
existing code relies on the platform-specific undefined result of those casts when the
float-to-int overflows.
The LLVM changes associated with adding this function attribute are here:
rL330947
rL330950
rL330951
Also as suggested, I changed the LLVM doc to mention the specific sanitizer flag that
catches this problem:
rL330958
Differential Revision: https://reviews.llvm.org/D46135
llvm-svn: 331041
Summary:
This patch moves the MultiplexASTDeserializationListener declaration into a public header.
We're currently using this multiplexer in the cling interpreter to attach another
ASTDeserializationListener during the execution (so, after the MultiplexConsumer is already
attached which prevents us from attaching more). So far we're doing this by patching clang
and making this class public, but it makes things easier if we make this instead just public in
upstream.
Reviewers: thakis, v.g.vassilev, rsmith, bruno
Reviewed By: bruno
Subscribers: llvm-commits, cfe-commits, v.g.vassilev
Differential Revision: https://reviews.llvm.org/D37475
llvm-svn: 331021
HIP is a language similar to CUDA (https://github.com/ROCm-Developer-Tools/HIP/blob/master/docs/markdown/hip_kernel_language.md ).
The language syntax is very similar, which allows a hip program to be compiled as a CUDA program by Clang. The main difference
is the host API. HIP has a set of vendor neutral host API which can be implemented on different platforms. Currently there is open source
implementation of HIP runtime on amdgpu target (https://github.com/ROCm-Developer-Tools/HIP).
This patch adds support of input kind and language standard hip.
When hip file is compiled, both LangOpts.CUDA and LangOpts.HIP is turned on. This allows compilation of hip program as CUDA
in most cases and only special handling of hip program is needed LangOpts.HIP is checked.
This patch also adds support of kernel launching of HIP program using HIP host API.
When -x hip is not specified, there is no behaviour change for CUDA.
Patch by Greg Rodgers.
Revised and lit test added by Yaxun Liu.
Differential Revision: https://reviews.llvm.org/D44984
llvm-svn: 330790
Summary:
By default Clang outputs its version (including git commit hash, in
case of trunk builds) into object and assembly files. It might be
useful to have an option to disable this, especially for debugging
purposes.
This patch implements new command line flags -Qn and -Qy (the names
are chosen for compatibility with GCC). -Qn disables output of
the 'llvm.ident' metadata string and the 'producer' debug info. -Qy
(enabled by default) does the opposite.
Reviewers: faisalv, echristo, aprantl
Reviewed By: aprantl
Subscribers: aprantl, cfe-commits, JDevlieghere, rogfer01
Differential Revision: https://reviews.llvm.org/D45255
llvm-svn: 330442
This implements support for the previously ignored flag
`-falign-functions`. This allows the frontend to request alignment on
function definitions in the translation unit where they are not
explicitly requested in code. This is compatible with the GCC behaviour
and the ICC behaviour.
The scalar value passed to `-falign-functions` aligns functions to a
power-of-two boundary. If flag is used, the functions are aligned to
16-byte boundaries. If the scalar is specified, it must be an integer
less than or equal to 4096. If the value is not a power-of-two, the
driver will round it up to the nearest power of two.
llvm-svn: 330378
Summary:
A clang builtin for xray typed events. Differs from
__xray_customevent(...) by the presence of a type tag that is vended by
compiler-rt in typical usage. This allows xray handlers to expand logged
events with their type description and plugins to process traced events
based on type.
This change depends on D45633 for the intrinsic definition.
Reviewers: dberris, pelikan, rnk, eizan
Subscribers: cfe-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D45716
llvm-svn: 330220
register destructor functions annotated with __attribute__((destructor))
using __cxa_atexit or atexit.
Register destructor functions annotated with __attribute__((destructor))
calling __cxa_atexit in a synthesized constructor function instead of
emitting references to the functions in a special section.
The primary reason for adding this option is that we are planning to
deprecate the __mod_term_funcs section on Darwin in the future. This
feature is enabled by default only on Darwin. Users who do not want this
can use command line option 'fno_register_global_dtors_with_atexit' to
disable it.
rdar://problem/33887655
Differential Revision: https://reviews.llvm.org/D45578
llvm-svn: 330199
Summary:
The clang driver option -save-temps was not passed to the LTO config,
so when invoking the ThinLTO backends via clang during distributed
builds there was no way to get LTO to save temp files.
Getting this to work with ThinLTO distributed builds also required
changing the driver to avoid a separate compile step to emit unoptimized
bitcode when the input was already bitcode under -save-temps. Not only is
this unnecessary in general, it is problematic for ThinLTO backends since
the temporary bitcode file to the backend would not match the module path
in the combined index, leading to incorrect ThinLTO backend index-based
optimizations.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, cfe-commits
Differential Revision: https://reviews.llvm.org/D45217
llvm-svn: 330194
framework module SomeKitCore {
...
export_as SomeKit
}
Given the module above, while generting autolink information during
codegen, clang should to emit '-framework SomeKitCore' only if SomeKit
was not imported in the relevant TU, otherwise it should use '-framework
SomeKit' instead.
rdar://problem/38269782
llvm-svn: 330152
`__has_include_next` requires correct DirectoryLookup for being
evaluated correctly. We were using Preprocessor::GetCurDirLookup() but
we were calling it after the preprocessor finished its work. And in this
case CurDirLookup is always nullptr which makes `__has_include_next`
behave as `__has_include`.
Fix by storing and using CurDirLookup when preprocessor enters a file,
not when we rewrite the includes.
rdar://problem/36305026
Reviewers: bkramer
Reviewed By: bkramer
Subscribers: jkorous-apple, cfe-commits
Differential Revision: https://reviews.llvm.org/D45603
llvm-svn: 330041
Summary:
This change addresses http://llvm.org/PR36926 by allowing users to pick
which instrumentation bundles to use, when instrumenting with XRay. In
particular, the flag `-fxray-instrumentation-bundle=` has four valid
values:
- `all`: the default, emits all instrumentation kinds
- `none`: equivalent to -fnoxray-instrument
- `function`: emits the entry/exit instrumentation
- `custom`: emits the custom event instrumentation
These can be combined either as comma-separated values, or as
repeated flag values.
Reviewers: echristo, kpw, eizan, pelikan
Reviewed By: pelikan
Subscribers: mgorny, cfe-commits
Differential Revision: https://reviews.llvm.org/D44970
llvm-svn: 329985
It means the same thing as -mllvm; there isn't any reason to have two
options which do the same thing.
Differential Revision: https://reviews.llvm.org/D45109
llvm-svn: 329965
The current support of the feature produces only 2 lines in report:
-Some general Code Generation Time;
-Total time of Backend Consumer actions.
This patch extends Clang time report with new lines related to Preprocessor, Include Filea Search, Parsing, etc.
Differential Revision: https://reviews.llvm.org/D43578
llvm-svn: 329684
Summary:
This change consolidates the always/never lists that may be provided to
clang to externally control which functions should be XRay instrumented
by imbuing attributes. The files follow the same format as defined in
https://clang.llvm.org/docs/SanitizerSpecialCaseList.html for the
sanitizer blacklist.
We also deprecate the existing `-fxray-instrument-always=` and
`-fxray-instrument-never=` flags, in favour of `-fxray-attr-list=`.
This fixes http://llvm.org/PR34721.
Reviewers: echristo, vlad.tsyrklevich, eugenis
Reviewed By: vlad.tsyrklevich
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D45357
llvm-svn: 329543
Found via codespell -q 3 -I ../clang-whitelist.txt
Where whitelist consists of:
archtype
cas
classs
checkk
compres
definit
frome
iff
inteval
ith
lod
methode
nd
optin
ot
pres
statics
te
thru
Patch by luzpaz! (This is a subset of D44188 that applies cleanly with a few
files that have dubious fixes reverted.)
Differential revision: https://reviews.llvm.org/D44188
llvm-svn: 329399
Summary:
`ASTPrinter` allows setting the ouput to any O-Stream, but that printer creates source-code-like syntax (and is also marked with a `FIXME`). The nice, colourful, mostly human-readable `ASTDumper` only works on the standard output, which is not feasible in case a user wants to see the AST of a file through a code navigation/comprehension tool.
This small addition of an overload solves generating a nice colourful AST block for the users of a tool I'm working on, [[ http://github.com/Ericsson/CodeCompass | CodeCompass ]], as opposed to having to duplicate the behaviour of definitions that only exist in the anonymous namespace of implementation TUs related to this module.
Reviewers: alexfh, klimek, rsmith
Reviewed By: alexfh
Subscribers: rnkovacs, dkrupp, gsd, xazax.hun, cfe-commits, #clang
Tags: #clang
Patch by Whisperity!
Differential Revision: https://reviews.llvm.org/D45096
llvm-svn: 329391
This CMake flag allows setting the default value for the
-f[no]-experimental-new-pass-manager flag.
Differential Revision: https://reviews.llvm.org/D44330
llvm-svn: 329366
Summary:
"-fmerge-all-constants" is a non-conforming optimization and should not
be the default. It is also causing miscompiles when building Linux
Kernel (https://lkml.org/lkml/2018/3/20/872).
Fixes PR18538.
Reviewers: rjmccall, rsmith, chandlerc
Reviewed By: rsmith, chandlerc
Subscribers: srhines, cfe-commits
Differential Revision: https://reviews.llvm.org/D45289
llvm-svn: 329300
ObjC and ObjC++ pass non-trivial structs in a way that is incompatible
with each other. For example:
typedef struct {
id f0;
__weak id f1;
} S;
// this code is compiled in c++.
extern "C" {
void foo(S s);
}
void caller() {
// the caller passes the parameter indirectly and destructs it.
foo(S());
}
// this function is compiled in c.
// 'a' is passed directly and is destructed in the callee.
void foo(S a) {
}
This patch fixes the incompatibility by passing and returning structs
with __strong or weak fields using the C ABI in C++ mode. __strong and
__weak fields in a struct do not cause the struct to be destructed in
the caller and __strong fields do not cause the struct to be passed
indirectly.
Also, this patch fixes the microsoft ABI bug mentioned here:
https://reviews.llvm.org/D41039?id=128767#inline-364710
rdar://problem/38887866
Differential Revision: https://reviews.llvm.org/D44908
llvm-svn: 328731
r327219 added wrappers to std::sort which randomly shuffle the container before
sorting. This will help in uncovering non-determinism caused due to undefined
sorting order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of
std::sort.
llvm-svn: 328636
This make -ivfsoverlay behave more like other fatal errors (e.g. missing
-include file) by skipping the missing file instead of bailing out of
the whole compilation. This makes it possible for libclang to still
provide some functionallity as well as to correctly produce the fatal
error diagnostic (previously we lost the diagnostic in libclang since
there was no TU to tie it to).
rdar://33385423
llvm-svn: 328337
I'm not sure /why/ this is causing issues for libclang, but it is.
Unbreak the buildbots since it's already consumed an hour of my time.
llvm-svn: 328286
When skipping building the module for a private framework module,
LangOpts.CurrentModule isn't enough for implict modules builds; for
instance, in case a private module is built while building a public one,
LangOpts.CurrentModule doesn't reflect the -fmodule-name being passed
down, but instead the module name which triggered the build.
Store the actual -fmodule-name in LangOpts.ModuleName and actually
check a name was provided during compiler invocation in order to
skip building the private module.
rdar://problem/38434694
llvm-svn: 328053
The patch adds nocf_check target independent attribute for disabling checks that were enabled by cf-protection flag.
The attribute can be appertained to functions and function pointers.
Attribute name follows GCC's similar attribute name.
Differential Revision: https://reviews.llvm.org/D41880
llvm-svn: 327768
This ensures that diagnostics are not remapped to incorrect preamble locations after
the second reparse with a remapped header file occurs.
rdar://37502480
llvm-svn: 327322
Duncan P. N. Exon Smith