I couldn't find any smaller folds to help the cases in:
https://bugs.llvm.org/show_bug.cgi?id=34046
after:
rL310141
The truncated rotate-by-variable patterns elude all of the existing transforms because
of multiple uses and knowledge about demanded bits and knownbits that doesn't exist
without the whole pattern. So we need an unfortunately large pattern match. But by
simplifying this pattern in IR, the backend is already able to generate
rolb/rolw/rorb/rorw for x86 using its existing rotate matching logic (although
there is a likely extraneous 'and' of the rotate amount).
Note that rotate-by-constant doesn't have this problem - smaller folds should already
produce the narrow IR ops.
Differential Revision: https://reviews.llvm.org/D36395
llvm-svn: 310509
We already support pulling through an add with constant RHS. We can do the same for subtract.
Differential Revision: https://reviews.llvm.org/D36443
llvm-svn: 310407
Note the original code I deleted incorrectly listed this as (X | C1) & C2 --> (X & C2^(C1&C2)) | C1 Which is only valid if C1 is a subset of C2. This relied on SimplifyDemandedBits to remove any extra bits from C1 before we got to that code.
My new implementation avoids relying on that behavior so that it can be naively verified with alive.
Differential Revision: https://reviews.llvm.org/D36384
llvm-svn: 310272
Unfortunately, it looks like there's some other missed optimizations in the generated code for some of these cases. I'll try to look at some of those next.
llvm-svn: 310184
Previously we were always trying to emit the zext or truncate before any shift. This meant if the 'and' mask was larger than the size of the truncate we would skip the transformation.
Now we shift the result of the and right first leaving the bit within the range of the truncate.
This matches what we are doing in foldSelectICmpAndOr for the same problem.
llvm-svn: 310159
Summary:
The (not (sext)) case is really (xor (sext), -1) which should have been simplified to (sext (xor, 1)) before we got here. So we shouldn't need to handle it.
With that taken care of we only need to two cases so don't need the swap anymore. This makes us in sync with the equivalent code in visitOr so inline this to match.
Reviewers: spatel, eli.friedman, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36240
llvm-svn: 310063
Name: narrow_shift
Pre: C1 < 8
%zx = zext i8 %x to i32
%l = lshr i32 %zx, C1
=>
%narrowC = trunc i32 C1 to i8
%ns = lshr i8 %x, %narrowC
%l = zext i8 %ns to i32
http://rise4fun.com/Alive/jIV
This isn't directly applicable to PR34046 as written, but we
need to have more narrowing folds like this to be sure that
rotate patterns are recognized.
llvm-svn: 310060
Summary:
This commit allows matchSelectPattern to recognize clamp of float
arguments in the presence of FMF the same way as already done for
integers.
This case is a little different though. With integers, given the
min/max pattern is recognized, DAGBuilder starts selecting MIN/MAX
"automatically". That is not the case for float, because for them only
full FMINNAN/FMINNUM/FMAXNAN/FMAXNUM ISD nodes exist and they do care
about NaNs. On the other hand, some backends (e.g. X86) have only
FMIN/FMAX nodes that do not care about NaNS and the former NAN/NUM
nodes are illegal thus selection is not happening. So I decided to do
such kind of transformation in IR (InstCombiner) instead of
complicating the logic in the backend.
Reviewers: spatel, jmolloy, majnemer, efriedma, craig.topper
Reviewed By: efriedma
Subscribers: hiraditya, javed.absar, n.bozhenov, llvm-commits
Patch by Andrei Elovikov <andrei.elovikov@intel.com>
Differential Revision: https://reviews.llvm.org/D33186
llvm-svn: 310054
Summary:
- add more tests
- pr27236.ll: rename %tmpN -> %N because otherwise a FileCheck
variable for newly appeared unnamed value would use the same name as
tmpN (as generated by update_test_checks.py)
- run update_test_checks.py
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: n.bozhenov, llvm-commits
Patch by Andrei Elovikov <andrei.elovikov@intel.com>
Differential Revision: https://reviews.llvm.org/D35002
llvm-svn: 310053
This adds support for sext in foldLogicCastConstant. This is a prerequisite for D36214.
Differential Revision: https://reviews.llvm.org/D36234
llvm-svn: 309880
When the 'and' test was originally added it was intended to make sure we didn't change it to a sext of and of cmp. But since then the test was changed to expect it to be turned into 'select cmp1, sext cmp2, 0'. Then another optimization was added to turn the select into 'sext (and cmp1, cmp2)' which is exactly the transformation that was being blocked when the test case started.
Looks like 'or' gets optimized in a similar way, but not 'xor'.
llvm-svn: 309793
This intrinsic clears the upper bits starting at a specified index. If the index is a constant we can do some simplifications.
This could be in InstSimplify, but we don't handle any target specific intrinsics there today.
Differential Revision: https://reviews.llvm.org/D36069
llvm-svn: 309604
This patch adds simplification support for the BEXTR/BEXTRI intrinsics to match gcc. This only supports cases that fold to 0 or can be fully constant folded. Theoretically we could support converting to AND if the shift part is unused or to only a shift if the mask doesn't modify any bits after an equivalent shl. gcc doesn't do these transformations either.
I put this in InstCombine, but it could be done in InstSimplify. It would be the first target specific intrinsic in InstSimplify.
Differential Revision: https://reviews.llvm.org/D36063
llvm-svn: 309603
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
llvm-svn: 309426
Summary:
Pointer difference simplifications currently happen only if input GEPs don't have other uses or their indexes are all constants, to avoid duplicating indexing arithmetic.
This patch enables cases with exactly one non-constant index among input GEPs to happen where there is no duplicated arithmetic or code size increase even if input GEPs have other uses.
For example, this patch allows "(&A[42][i]-&A[42][0])" --> "i", which didn't happen previously, if the input GEP(s) have other uses.
Reviewers: sanjoy, bkramer
Reviewed By: sanjoy
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D35499
llvm-svn: 309304
Summary:
Add canary tests to verify that InstCombine currently does nothing with the element atomic memory intrinsics for memmove and memset.
Placeholder tests that will fail once element atomic @llvm.mem[move|set] instrinsics have been added to the MemIntrinsic class hierarchy. These will act as a reminder to verify that inst combine handles these intrinsics properly once they have been added to that class hierarchy.
Reviewers: reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35502
llvm-svn: 308247
Summary:
If one side simplifies to the identity value for inner opcode, we can replace the value with just the operation that can't be simplified.
I've removed a couple now unneeded special cases in visitAnd and visitOr. There are probably other cases I missed.
Reviewers: spatel, majnemer, hfinkel, dberlin
Reviewed By: spatel
Subscribers: grandinj, llvm-commits, spatel
Differential Revision: https://reviews.llvm.org/D35451
llvm-svn: 308111
This fold hit the trifecta:
1. It was untested.
2. It oversteps (multiuse is not checked, so increases instruction count).
3. It is incomplete (doesn't work for vectors).
llvm-svn: 308102
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
Prior to this commit both of the added test cases were passing. However, in the
latter case (test7) we were doing a lot more work to arrive at the same answer
(i.e., we were using isImpliedCondMatchingOperands() to determine the
implication.).
llvm-svn: 307400
This patch adds support for handling some forms of ands and ors in
ValueTracking's isImpliedCondition API.
PR33611
https://reviews.llvm.org/D34901
llvm-svn: 307304
Sanjay Patel