Summary:
The pass that inserts s_waitcnt instructions where needed propagated
info used to track dependencies for each block by iterating over the
predecessor blocks. The iteration was terminated when a predecessor
that had not yet been processed was encountered. Any info in blocks
later in the list was therefore not processed, leading to the
possiblility of a required s_waitcnt not being inserted.
The fix is simply to change the "break" to "continue" for the
relevant loops, so that all visited blocks are processed. This
is likely what was intended when the code was written.
There is no test case provided for this fix because:
1) the only example that reproduces this is large and resistant to
being reduced
2) the change is trivial
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D40544
llvm-svn: 319651
As part of the unification of the debug format and the MIR format, avoid
printing "vreg" for virtual registers (which is one of the current MIR
possibilities).
Basically:
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/%vreg([0-9]+)/%\1/g"
* grep -nr '%vreg' . and fix if needed
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/ vreg([0-9]+)/ %\1/g"
* grep -nr 'vreg[0-9]\+' . and fix if needed
Differential Revision: https://reviews.llvm.org/D40420
llvm-svn: 319427
GFX9 does not enable bounds checking for the resource descriptors
used for private access, so it should be OK to use vaddr with
a potentially negative value.
llvm-svn: 319393
When translating pseudo to MC, v_add/sub/subrev_u32 shall be mapped via a separate table as GFX8 has opcodes with the same names.
These instructions shall also be labelled as renamed for pseudoToMCOpcode to handle them correctly.
Reviewers: arsenm
Differential Revision: https://reviews.llvm.org/D40550
llvm-svn: 319311
The object can't straddle the address space
wrap around, so I think it's OK to assume any
offsets added to the base object pointer can't
overflow. Similar logic already appears to be
applied in SelectionDAGBuilder when lowering
aggregate returns.
llvm-svn: 319272
GFX9 stopped using m0 for most DS instructions. Select
a different instruction without the use. I think this will
be less error prone than trying to manually maintain m0
uses as needed.
llvm-svn: 319270
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
LLVM Coding Standards:
Function names should be verb phrases (as they represent actions), and
command-like function should be imperative. The name should be camel
case, and start with a lower case letter (e.g. openFile() or isFoo()).
Differential Revision: https://reviews.llvm.org/D40416
llvm-svn: 319168
Summary:
The entire algorithm operates per basic-block, so for cache locality
it should be better to re-optimize a basic-block immediately rather than
in a separate loop.
I don't have performance measurements.
Change-Id: I85106570bd623c4ff277faaa50ee43258e1ddcc5
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D40344
llvm-svn: 319156
Summary:
The PeepholeOptimizer pass calls this function solely based on checking
DefMI->isMoveImmediate(), which only checks the MoveImm bit of the
instruction description. So it's up to FoldImmediate itself to properly
check that DefMI *actually* moves from an immediate.
I don't have a separate test case for this, but the next patch introduces
a test case which happens to crash without this change.
This error is caught by the assertion in MachineOperand::getImm().
Change-Id: I88e7cdbcf54d75e1a296822e6fe5f9a5f095bbf8
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D40342
llvm-svn: 319155
AMDGPU backend errors with "unsupported call to function" upon
encountering a call to llvm.log{,10}.{f16,f32} intrinsics. This patch
adds custom lowering to avoid that error on both R600 and SI.
Reviewers: arsenm, jvesely
Subscribers: tstellar
Differential Revision: https://reviews.llvm.org/D29942
llvm-svn: 319025
SITargetLowering::LowerCall uses dummy pointer info for byval argument, which causes
flat load instead of buffer load.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D40040
llvm-svn: 318844
Summary:
This bug seems to have gone unnoticed because critical cases with LDS
instructions are eliminated by the peephole optimizer.
However, equivalent situations arise with buffer loads and stores
as well, so this fixes regressions since r317751 ("AMDGPU: Merge
S_BUFFER_LOAD_DWORD_IMM into x2, x4").
Fixes at least:
KHR-GL45.shader_storage_buffer_object.basic-operations-case1-cs
KHR-GL45.cull_distance.functional
piglit tes-input-gl_ClipDistance.shader_test
... and probably more
Change-Id: I0e371536288eb8e6afeaa241a185266fd45d129d
Reviewers: arsenm, mareko, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D40303
llvm-svn: 318829
This is mostly moving VMEM clause breaking into
the hazard recognizer. Also move another hazard
currently handled in the waitcnt pass.
Also stops breaking clauses unless xnack is enabled.
llvm-svn: 318557
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Summary:
Make it possible to feed runtime information back to tablegen to enable
profile-guided tablegen-eration, detection of untested tablegen definitions, etc.
Being a cross-compiler by nature, LLVM will potentially collect data for multiple
architectures (e.g. when running 'ninja check'). We therefore need a way for
TableGen to figure out what data applies to the backend it is generating at the
time. This patch achieves that by including the name of the 'def X : Target ...'
for the backend in the TargetRegistry.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, arsenm, jyknight, aditya_nandakumar, sdardis, nemanjai, ab, nhaehnle, t.p.northover, javed.absar, qcolombet, llvm-commits, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D39742
llvm-svn: 318352
Use VOP3 add/addc like usual.
This has some tradeoffs. Inline immediates fold
a little better, but other constants are worse off.
SIShrinkInstructions could be made smarter to handle
these cases.
This allows us to avoid selecting scalar adds where we
need to track the carry in scc and replace its users.
This makes it easier to use the carryless VALU adds.
llvm-svn: 318340
If the register from the copy from exec was spilled,
the copy before the spill was deleted leaving a spill
of undefined register verifier error and miscompiling.
Check for other use instructions of the copy register.
llvm-svn: 318132
This was using a custom function that didn't handle the
addressing modes properly for private. Use
isLegalAddressingMode to avoid duplicating this.
Additionally, skip the combine if there is only one use
since the standard combine will handle it.
llvm-svn: 318013
r600 uses dummy pointer info for lowering load/store. Since dummy pointer info
assumes address space 0, this causes isel failure when temporary load/store SDNodes
are generated for amdgiz environment.
Since the offest is not constant, FixedStack pseudo source value cannot be used
to create the pointer info. This patch creates pointer info using llvm undef value.
At least this provides correct address space so that isel can be done correctly.
Differential Revision: https://reviews.llvm.org/D39698
llvm-svn: 317862
The pointer info for pseudo source for r600 is not correct when
alloca addr space is not 0, which causes invalid SDNode for r600---amdgiz.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D39670
llvm-svn: 317861
Tim Corringham