Summary:
It was previously not possible for tools to use solely the stackmap
information emitted to reconstruct the return addresses of callsites in
the map, which is necessary to use the information to walk a stack. This
patch adds per-function callsite counts when emitting the stackmap
section in order to resolve the problem. Note that this slightly alters
the stackmap format, so external tools parsing these maps will need to
be updated.
**Problem Details:**
Records only store their offset from the beginning of the function they
belong to. While these records and the functions are output in program
order, it is not possible to determine where the end of one function's
records are without the callsite count when processing the records to
compute return addresses.
Patch by Kavon Farvardin!
Reviewers: atrick, ributzka, sanjoy
Subscribers: nemanjai
Differential Revision: https://reviews.llvm.org/D23487
llvm-svn: 281532
that use the Mach::dyld_info_command type for the load commands that are
currently use in the MachOObjectFile constructor.
This contains the missing checks for LC_DYLD_INFO and
LC_DYLD_INFO_ONLY load commands and the fields for the
Mach::dyld_info_command type.
llvm-svn: 281400
that use the Mach::linkedit_data_command type for the load commands that are
currently used in the MachOObjectFile constructor.
This contains the missing checks for LC_DATA_IN_CODE and
LC_LINKER_OPTIMIZATION_HINT load commands and the fields for the
Mach::linkedit_data_command type. Checking for other load commands that
use this type will be added later.
Also fixed a couple of places that was using sizeof(MachOObjectFile::LoadCommandInfo)
that should have been using sizeof(MachO::load_command).
llvm-svn: 280267
Summary: This change fix bug in AMDGPU disassembly. Previously, presence of symbols other than kernel symbols caused objdump to skip begining of those symbols.
Reviewers: tstellarAMD, vpykhtin, Bigcheese, ruiu
Subscribers: kzhuravl, arsenm
Differential Revision: http://reviews.llvm.org/D21966
llvm-svn: 278921
This contains the two missing checks for LC_SEGMENT load command fields.
And checks for the Mach-O sections fields that would make them invalid.
With the new checks, some of the existing malformed file checks now trips one
of these instead of the issue it was having before so those tests were adjusted.
llvm-svn: 278557
This is where an LC_SEGMENT load command has a fileoff field that
extends past the end of the file.
Also fix llvm-nm and llvm-size to remove the errorToErrorCode() call so error messages are printed.
And needed to update a few test cases now that they do print the error messages just a
bit differently.
llvm-svn: 277845
and its clients to use the new llvm::Error model for error handling.
Changed getAsArchive() from ErrorOr<...> to Expected<...> so now all
interfaces there use the new llvm::Error model for return values.
In the two places it had if (!Parent) this is actually a program error so changed
from returning errorCodeToError(object_error::parse_failed) to calling
report_fatal_error() with a message.
In getObjectForArch() added error messages to its two llvm::Error return values
instead of returning errorCodeToError(object_error::arch_not_found) with no
error message.
For the llvm-obdump, llvm-nm and llvm-size clients since the only binary files in
Mach-O Universal Binaries that are supported are Mach-O files or archives with
Mach-O objects, updated their logic to generate an error when a slice contains
something like an ELF binary instead of ignoring it. And added a test case for
that.
The last error stuff to be cleaned up for libObject’s MachOUniversalBinary is
the use of errorOrToExpected(Archive::create(ObjBuffer)) which needs
Archive::create() to be changed from ErrorOr<...> to Expected<...> first,
which I’ll work on next.
llvm-svn: 274079
allow a good error message to be produced.
I added the one test case that the object file tools could produce an error
message. The other two errors can’t be triggered if the input file is passed
through sys::fs::identify_magic(). But the malformedError("bad magic number")
does get triggered by the logic in llvm-dsymutil when dealing with a normal
Mach-O file. The other "File too small ..." error would take a logic error
currently to produce and is not tested for.
llvm-svn: 273946
Summary:
Our YAML library's handling of tags isn't perfect, but it is good enough to get rid of the need for the --format argument to yaml2obj. This patch does exactly that.
Instead of requiring --format, it infers the format based on the tags found in the object file. The supported tags are:
!ELF
!COFF
!mach-o
!fat-mach-o
I have a corresponding patch that is quite large that fixes up all the in-tree test cases.
Reviewers: rafael, Bigcheese, compnerd, silvas
Subscribers: compnerd, llvm-commits
Differential Revision: http://reviews.llvm.org/D21711
llvm-svn: 273915
Darwin added support in its Xcode 8.0 tools (released in the beta) for universal
files where offsets and sizes for the objects are 64-bits to allow support for
objects contained in universal files to be larger then 4gb. The change is very
straight forward. There is a new magic number that differs by one bit, much
like the 64-bit Mach-O files. Then there is a new structure that follow the
fat_header that has the same layout but with the offset and size fields using
64-bit values instead of 32-bit values.
rdar://26899493
llvm-svn: 273207
Darwin added support in its Xcode 8.0 tools (released in the beta) for static
library table of contents with 64-bit offsets to the archive members. The
change is very straight forward. The table of contents member is named
___.SYMDEF_64 or "___.SYMDEF_64 SORTED" and same layout is used but with
fields using 64 bit values instead of 32 bit values.
rdar://26869808
llvm-svn: 273058
The -mattr options in these four tests have no effect on the output of
llvm-objdump. In the case of the two Mips tests, removing the -mattr option
left duplicate RUN lines so the duplicates have been removed.
llvm-svn: 272906
Summary:
The Mips implementation only covers the feature bits described by the ELF
e_flags so far. Mips stores additional feature bits such as MSA in the
.MIPS.abiflags section.
Also fixed a small bug this revealed where microMIPS wouldn't add the
EF_MIPS_MICROMIPS flag when using -filetype=obj.
Reviewers: echristo, rafael
Subscribers: rafael, mehdi_amini, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21125
llvm-svn: 272880
when the object is from a slice of a Mach-O Universal Binary use something like
"foo.o (for architecture i386)" as part of the error message when expected.
Also fixed places in these tools that were ignoring object file errors from
MachOUniversalBinary::getAsObjectFile() when the code moved on to see if
the slice was an archive.
To do this MachOUniversalBinary::getAsObjectFile() and
MachOUniversalBinary::getObjectForArch() were changed from returning
ErrorOr<...> to Expected<...> then that was threaded up to its users.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in two places yet to be fully converted.
llvm-svn: 271332
This is a support COFF feature. Ensure that we can display the weak externals
auxiliary symbol. It contains useful information (such as the default binding
and how to resolve the symbol).
This reapplies the previous patch with a modification which hopefully should fix
the endianness issues. The variadic call would promote the ulittle32_t to a
uint32_t which would lose the byte-swapping behaviour desired.
llvm-svn: 270813
This is a support COFF feature. Ensure that we can display the weak externals
auxiliary symbol. It contains useful information (such as the default binding
and how to resolve the symbol).
llvm-svn: 270648
when the object is in an archive to use something like libx.a(foo.o) as part of
the error message.
Also changed llvm-objdump and llvm-size to be like llvm-nm and ignore non-object
files in archives and not produce any error message.
To do this Archive::Child::getAsBinary() was changed from ErrorOr<...> to
Expected<...> then that was threaded up to its users.
Converting this interface to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in one place yet to be fully converted.
Again there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comments for those.
llvm-svn: 269784
load commands.
The existing test case in test/Object/macho-invalid.test for
macho-invalid-too-small-segment-load-command has a cmdsize of 55, while
being too small also it is not a multiple of 4. So when that check is added
this test case will produce a different error. So I constructed a new test case
that will trigger the intended error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages which prints the load command index. I also removed both
object_error::macho_load_segment_too_small and
object_error::macho_load_segment_too_many_sections from Object/Error.h
as they are not needed and can just use object_error::parse_failed and let the
error message string distinguish the specific error.
llvm-svn: 268652
Summary:
Version 2 is now the default. If you want to emit version 1, use
the amdgcn--amdhsa-amdcov1 triple.
Reviewers: arsenm, kzhuravl
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19283
llvm-svn: 268647
command has a size less than 8 bytes.
I think the existing test case in test/Object/macho-invalid.test for
macho64-invalid-too-small-load-command was trying to test for this but that
test case triggered a different error given how it was constructed. So I
constructed a new test case that would trigger this specific error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages. I also removed object_error::macho_small_load_command from
Object/Error.h as it is not needed and can just use object_error::parse_failed
and let the error message string distinguish the error.
llvm-svn: 268463
command other than the first one is past the end of the load commands.
This is like the test case in test/Object/macho-invalid.test for
macho64-invalid-incomplete-load-command but it is the second load command
that is past the end of all the load commands instead of the first.
The code in the constructor for MachOObjectFile that loops over the load
commands used getNextLoadCommandInfo() which was not producing
a good error message. So that was fixed and a test case was added.
llvm-svn: 268403
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
llvm-svn: 268298
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
llvm-svn: 266919
And update the existing test cases in test/Object/macho-invalid.test
to use llvm-objdump with the -macho option to produce these
error messages and stop producing the generic "Invalid data
was encountered while parsing the file" message.
Working from the beginning of the file, if the mach header is too large for
the size of the file and then if the load commands that follow extend past
the end of the file these two errors now generate correct error messages.
Both of these have existing test cases in test/Object/macho-invalid.test .
But the first with macho-invalid-header it will never trigger the error message
"mach header extends past the end of the file" using any of the llvm tools as
they all use identify_magic() which rejects files with the correct magic number
that are too small in size. So I tested this by hacking that code and seeing the
error message down in parseHeader() really does happen. So in case there
is ever code in llvm that directly calls createMachOObjectFile() this error
message will be correctly produced.
The second error message of "load commands extends past the end of the file"
is triggered by a number of existing tests cases in test/Object/macho-invalid.test .
Also other tests trigger different error messages now like "ilocalsym plus
nlocalsym in LC_DYSYMTAB load command extends past the end of the
symbol table".
There are two existing test cases that still get the "Invalid data was encountered ..."
error messages that I will tackle next. But they will involve a bit of pluming an
Expect<...> up through the call stack and I want to do those as separate changes.
FYI, for those test cases that were trying to test specific errors that now get
different errors I’ll fix those in follow on changes and create new test cases
for those so they test the error they were meant to test.
llvm-svn: 266248
Reenable reverted r265550 with endianness issue fixed. Variables of
endian-aware types such as ulittle32_t should be explicitly casted
to their natural equivalent types before passing it as vararg to
printf like functions (format in my case). Added lit config file
depending on AMDGPU target as the testcase uses assembler.
Differential revision: http://reviews.llvm.org/D16998
llvm-svn: 265645
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
This reverts commit r265550. There're problems with endianness on dumping instruction bytes. Need to find out how to use support::ulittle32_t type properly.
llvm-svn: 265554
The patch supports common STV_xxx visibility flags and MIPS specific
STO_MIPS_xxx flags.
Differential Revision: http://reviews.llvm.org/D18447
llvm-svn: 264300
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
llvm-svn: 264187
In executable and shared object ELF files, relocations in the file contain the final virtual address rather than section offset so this is adjusted to display section offset.
Differential revision: http://reviews.llvm.org/D15965
llvm-svn: 263971
The section alignment field was marked optional but not provided a
default value: initialize it with 0.
While we are here, ensure that the section alignment is plausible.
llvm-svn: 263692
The dynamic table is also an array of a fixed structure, so it can be
represented with a DynReginoInfo.
No major functionality change. The extra error checking is covered by
existing tests with a broken dynamic program header.
Idea extracted from r260488. I did the extra cleanups.
llvm-svn: 261107
We used to keep both a section and a pointer to the first symbol.
The oddity of keeping a section for dynamic symbols is because there is
a DT_SYMTAB but no DT_SYMTABZ, so to print the table we have to find the
size via a section table.
The reason for still keeping a pointer to the first symbol is because we
want to be able to print relocation tables even if the section table is
missing (it is mandatory only for files used in linking).
With this patch we keep just a DynRegionInfo. This then requires
changing a few places that were asking for a Elf_Shdr but actually just
needed the first symbol.
The test change is to delete the program header pointer.
Now that we use the information of both DT_SYMTAB and .dynsym, we don't
depend on the sh_entsize of .dynsym if we see DT_SYMTAB.
Note: It is questionable if it is worth it putting the effort to report
broken sh_entsize given that in files with no section table we have to
assume it is sizeof(Elf_Sym), but that is for another change.
Extracted from r260488.
llvm-svn: 261099
Original commit message:
[readobj] Dump DT_JMPREL relocations when outputting dynamic relocations.
The bits of r260488 it depends on have been committed.
llvm-svn: 260970
This requires making an error message a bit more generic, but that seems
a reasonable tradeoff.
Extracted from r260488 but simplified a bit.
llvm-svn: 260967
Original messages:
Revert "[readobj] Handle ELF files with no section table or with no program headers."
Revert "[readobj] Dump DT_JMPREL relocations when outputting dynamic relocations."
r260489 depends on r260488 and among other issues r260488 deleted error
handling code.
llvm-svn: 260962
This adds support for finding the dynamic table and dynamic symbol table via
the section table or the program header table. If there's no section table an
attempt is made to figure out the length of the dynamic symbol table.
llvm-svn: 260488
at least as big as the mach header to be identified as a Mach-O file and
make sure smaller files are not identified as a Mach-O files but as
unknown files. Also fix identify_magic() so it looks at all 4 bytes of
the filetype field when determining the type of the Mach-O file.
Then fix the macho-invalid-header test case to check that it is an
unknown file and make sure it does not get the error for
object_error::parse_failed. And also update the unit tests.
llvm-svn: 258883
llvm-objdump when printing the Mach Header to print the unknown
cputype and cpusubtype fields as decimal instead of not printing
them at all. And change the test to check for that.
llvm-svn: 258826
in MachOObjectFile::getSymbolByIndex() when a Mach-O file has
a symbol table load command but the number of symbols are zero.
The code in MachOObjectFile::symbol_begin_impl() should not be
assuming there is a symbol at index 0, in cases there is no symbol
table load command or the count of symbol is zero. So I also fixed
that. And needed to fix MachOObjectFile::symbol_end_impl() to
also do the same thing for no symbol table or one with zero entries.
The code in MachOObjectFile::getSymbolByIndex() should trigger
the report_fatal_error() for programmatic errors for any index when
there is no symbol table load command and not return the end iterator.
So also fixed that. Note there is no test case as this is a programmatic
error.
The test case using the file macho-invalid-bad-symbol-index has
a symbol table load command with its number of symbols (nsyms)
is zero. Which was incorrectly testing the bad triggering of the
report_fatal_error() in in MachOObjectFile::getSymbolByIndex().
This test case is an invalid Mach-O file but not for that reason.
It appears this Mach-O file use to have an nsyms value of 11,
and what makes this Mach-O file invalid is the counts and
indexes into the symbol table of the dynamic load command
are now invalid because the number of symbol table entries
(nsyms) is now zero. Which can be seen with the existing
llvm-obdump:
% llvm-objdump -private-headers macho-invalid-bad-symbol-index
…
Load command 4
cmd LC_SYMTAB
cmdsize 24
symoff 4216
nsyms 0
stroff 4392
strsize 144
Load command 5
cmd LC_DYSYMTAB
cmdsize 80
ilocalsym 0
nlocalsym 8 (past the end of the symbol table)
iextdefsym 8 (greater than the number of symbols)
nextdefsym 2 (past the end of the symbol table)
iundefsym 10 (greater than the number of symbols)
nundefsym 1 (past the end of the symbol table)
...
And the native darwin tools generates an error for this file:
% nm macho-invalid-bad-symbol-index
nm: object: macho-invalid-bad-symbol-index truncated or malformed object (ilocalsym plus nlocalsym in LC_DYSYMTAB load command extends past the end of the symbol table)
I added new checks for the indexes and sizes for these in the
constructor of MachOObjectFile. And added comments for what
would be a proper diagnostic messages.
And changed the test case using macho-invalid-bad-symbol-index
to test for the new error now produced.
Also added a test with a valid Mach-O file with a symbol table
load command where the number of symbols is zero that shows
the report_fatal_error() is not called.
llvm-svn: 258576
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "bad string index" for bad string indexes. Updated the error message
in the llvm-objdump test, and added tests to show llvm-nm prints
"bad string index" and a test to print the actual bad string index value
which in this case is 0xfe000002 when printing the fields as raw hex.
llvm-svn: 258520
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "(?,?)" or just "s" for bad section indexes. Also added a test to show
it prints the bad section index of "42" when printing the fields as raw hex.
llvm-svn: 258434
Some architecture specific ELF section flags might have the same value
(for example SHF_X86_64_LARGE and SHF_HEX_GPREL) and we have to check
machine architectures to select an appropriate set of possible flags.
The patch selects architecture specific flags into separate arrays
`ElfxxxSectionFlags` and combines `ElfSectionFlags` and `ElfxxxSectionFlags`
before pass to the `StreamWriter::printFlags()` method.
Differential Revision: http://reviews.llvm.org/D16269
llvm-svn: 258334
MIPS 32-bit ABI uses REL relocation record format to save dynamic
relocations. The patch teaches llvm-readobj to show dynamic relocations
in this format.
Differential Revision: http://reviews.llvm.org/D16114
llvm-svn: 258001
We always create archives with just he filename as the member name, but
other archives can put a more complicated path in there.
This patches handles it by computing just the filename as we do when
adding a new member.
If storing the path is important for some reason, we should probably
have an orthogonal option for doing that and do it for both old and new
members.
Fixes pr25877.
llvm-svn: 256001
A manipulation (in this case, mkdir) can make slack between creating and touching %t.older/evenlen.
I would make this rewrote with python if this were still unstable.
llvm-svn: 254965
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
llvm-svn: 253511
Also adds a 'trivial' ELF file. This was generated by assembling
and linking a file with the symbol main which contains a single
return instruction.
llvm-svn: 251096
This patch includes a fix for a llvm-readobj test. With this patch,
the tool does no longer print out COFF headers for the short import
file, but that's probably desirable because the header for the short
import file is dummy.
llvm-svn: 246283
COFF short import files are special kind of files that contains only
DLL-exported symbol names. That's different from object files because
it has no data except symbol names.
This change implements a SymbolicFile interface for the short import
files so that symbol names can be accessed through that interface.
llvm-ar is now able to read the file and create symbol table entries
for short import files.
llvm-svn: 246276
In tree they are only used by llvm-readobj, but it is also used by
https://github.com/mono/CppSharp.
While at it, add some missing error checking.
llvm-svn: 244320
lld might end up using a small part of this, but it will be in a much
refactored form. For now this unblocks avoiding the full section scan in the
ELFFile constructor.
This also has a (very small) error handling improvement.
llvm-svn: 244282
This makes llvm-nm consistent with binutils nm on executables and DLLs.
For a vanilla hello world executable, the address of main should include
the default image base of 0x400000.
llvm-svn: 243755
llvm-readobj exists for testing llvm. We can safely stop the program
the first time we know the input in corrupted.
This is in preparation for making it handle a few more broken files.
llvm-svn: 242656
For now the Archive owns the buffers of the thin archive members.
This makes for a simple API, but all the buffers are destructed
only when the archive is destructed. This should be fine since we
close the files after mmap so we should not hit an open file
limit.
llvm-svn: 242215
They should probably be created on anything that is not windows or linux, but I will
test on freebsd before changing that.
With this it is possible to bootstrap with llvm-ar instead of ar+ranlib on OS X.
llvm-svn: 241849
It looks like ld64 requires it. With this we seem to be able to bootstrap using
llvm-ar+/usr/bin/true instead of ar+ranlib (currently on stage2).
llvm-svn: 241842
No support for the symbol table yet (but will hopefully add it today).
We always use the long filename format so that we can align the member,
which is an advantage of the BSD format.
llvm-svn: 241721
Use AddressAlign field's value to properly align sections content in the
yaml2obj tool. Before this change the yaml2obj ignored AddressAlign and
always aligned section on 16 bytes boundary.
llvm-svn: 241674
getSymbolValue now returns a value that in convenient for most callers:
* 0 for undefined
* symbol size for common symbols
* offset/address for symbols the rest
Code that needs something more specific can check getSymbolFlags.
llvm-svn: 241605
They are implemented like that in some object formats, but for the interface
provided by lib/Object, SF_Undefined and SF_Common are different things.
This matches the ELF and COFF implementation and fixes llvm-nm for MachO.
llvm-svn: 241587
When talking about the virtual address of sections the coff spec says:
... for simplicity, compilers should set this to zero. Otherwise, it is an
arbitrary value that is subtracted from offsets during relocation.
We don't currently subtract it, so check that it is zero.
If some producer does create such files, we can change getRelocationOffset
instead.
llvm-svn: 241447
SHT_NOBITS sections do not have content in an object file. Now the yaml2obj
tool does not accept `Content` field for such sections, and the obj2yaml
tool does not attempt to read the section content from a file.
Restore r241350 and r241352.
llvm-svn: 241377
r241350 broke lld tests.
r241352 depends on r241350.
Original messages:
"[ELFYAML] Fix handling SHT_NOBITS sections by obj2yaml/yaml2obj tools"
"[ELFYAML] Make the Size field for .bss section optional"
llvm-svn: 241354
SHT_NOBITS sections do not have content in an object file. Now yaml2obj
tool does not accept `Content` field for such sections, and obj2yaml
tool does not attempt to read the section content from a file.
llvm-svn: 241350
This also improves the logic of what is an error:
* getSection(uint_32): only return an error if the index is out of bounds. The
index 0 corresponds to a perfectly valid entry.
* getSection(Elf_Sym): Returns null for symbols that normally don't have
sections and error for out of bound indexes.
In many places this just moves the report_fatal_error up the stack, but those
can then be fixed in smaller patches.
llvm-svn: 241156
This moves the error checking for string tables to getStringTable which returns
an ErrorOr<StringRef>.
This improves error checking, makes it uniform across all string tables and
makes it possible to check them once instead of once per name.
llvm-svn: 240950
This case had been failing on testers that didn't have x86 support. Rather
than XFAIL it on testers without x86 support, I've just assembled it and used
the raw object as the test input.
llvm-svn: 240875
The parser provides a convenient interface for reading llvm stackmap v1 sections
in object files.
This patch also includes a new option for llvm-readobj, '-stackmap', which uses
the parser to pretty-print stackmap sections for debugging/testing purposes.
llvm-svn: 240860
COFF and MachO only define symbol sizes for common symbols. Reflect that
in the class hierarchy by having a method for common symbols only in the base
and a general one in ELF.
This avoids the need of using a magic value for the size, which had a few
problems
* Most callers didn't check for it.
* The ones that did could not tell the magic value from a file actually having
that value.
llvm-svn: 240529
Only common symbol on MachO and COFF have a size.
For COFF we already had a custom format.
For MachO, there is no native objdump and we were printing it as ELF. Now
we only print the sizes for symbols that actually have them.
llvm-svn: 240422
This patch changes getRelocationAddend to use ErrorOr and considers it an error
to try to get the addend of a REL section.
If, for example, a x86_64 file has a REL section, that file is corrupted and
we should reject it.
Using ErrorOr is not ideal since we check the section type once per relocation
instead of once per section.
Checking once per section would involve getRelocationAddend just asserting and
callers checking the section before iterating over the relocations.
In any case, this is an improvement and includes a test.
llvm-svn: 240176
We cannot prepend __imp_ in the IR mangler because a function reference may
be emitted unmangled in a constant initializer. The linker is expected to
resolve such references to thunks. This is covered by the new test case.
Strictly speaking we ought to emit two undefined symbols, one with __imp_ and
one without, as we cannot know which symbol the final object file will refer
to. However, this would require rather intrusive changes to IRObjectFile,
and lld works fine without it for now.
This reimplements r239437, which was reverted in r239502.
Differential Revision: http://reviews.llvm.org/D10400
llvm-svn: 239560
This reverts commit r239437.
This broke clang-cl self-hosts. We'd end up calling the __imp_ symbol
directly instead of using it to do an indirect function call.
llvm-svn: 239502
llvm-lib is intended to be a lib.exe compatible utility that also
understands bitcode. The implementation lives in a library so that
lld can use it to implement /lib.
Differential Revision: http://reviews.llvm.org/D10297
llvm-svn: 239434
Report proper error code from MachOObjectFile constructor if we
can't parse another segment load command (we already return a proper
error if segment load command contents is suspicious).
llvm-svn: 239109
Summary:
Properly report the error in segment load commands from MachOObjectFile
constructor instead of crashing the program.
Adjust the test case accordingly.
Test Plan: regression test suite
Reviewers: rafael, filcab
Subscribers: llvm-commits
llvm-svn: 239081
Summary:
Currently all load commands are parsed in MachOObjectFile constructor.
If the next load command cannot be parsed, or if command size is too
small, properly report it through the error code and fail to construct
the object, instead of crashing the program.
Test Plan: regression test suite
Reviewers: rafael, filcab
Subscribers: llvm-commits
llvm-svn: 239080
Summary: Instead, properly report this error from MachOObjectFile constructor.
Test Plan: regression test suite
Reviewers: rafael
Subscribers: llvm-commits
llvm-svn: 239078
The ELF spec is very clear:
-----------------------------------------------------------------------------
If the value is non-zero, it represents a string table index that gives the
symbol name. Otherwise, the symbol table entry has no name.
--------------------------------------------------------------------------
In particular, a st_name of 0 most certainly doesn't mean that the symbol has
the same name as the section.
llvm-svn: 238899
MachO and COFF quite reasonably only define the size for common symbols.
We used to try to figure out the "size" by computing the gap from one symbol to
the next.
This would not be correct in general, since a part of a section can belong to no
visible symbol (padding, private globals).
It was also really expensive, since we would walk every symbol to find the size
of one.
If a caller really wants this, it can sort all the symbols once and get all the
gaps ("size") in O(n log n) instead of O(n^2).
On MachO this also has the advantage of centralizing all the checks for an
invalid n_sect.
llvm-svn: 238028
ARM32 ELF R_ARM_V4BX relocation format is a special relocation type
that records the location of an ARMv4t BX instruction to enable a
static linker to generate ARMv4 compatible instructions. This
relocation does not contain a reference symbol.
This patch enabled its creation by removing the requeriment of a
relocation symbol target in ELFState<ELFT>::writeSectionContent.
llvm-svn: 235513
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
llvm-svn: 232184
The internal shell was already threading around a 'cwd' parameter. We
just have to make it mutable so that we can update it as the test script
executes.
If the shell ever grows support for environment variable substitution,
we could also implement support for export.
llvm-svn: 231017
In the review for r230567, it was pointed out we should really test
the lib/Object part of that change. This does so using llvm-readobj.
llvm-svn: 230779
The 64-bit MIPS ELF archive file format is used by MIPS64 targets.
The main difference from a regular archive file is the symbol table format:
1. ar_name is equal to "/SYM64/"
2. number of symbols and offsets are 64-bit integers
http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf
Page 96
The patch allows reading of such archive files by llvm-nm, llvm-objdump
and other tools. But it does not support archive files with number of symbols
and/or offsets exceed 2^32. I think it is a rather rare case requires more
significant modification of `Archive` class code.
http://reviews.llvm.org/D7546
llvm-svn: 229520
The `Addend` is an optional field of the `Relocation` YAML record. But
we do not provide its default value while reading it from a YAML file
and so it might keep uninitialized.
I am going to fix the code by a separate commit. We might either make
this field mandatory (at least for .rela sections) or specify 0 as
a default value explicitly.
llvm-svn: 227318
MIPS64 ELF file has a very specific relocation record format. Each
record might specify up to three relocation operations. So the `r_info`
field in fact consists of three relocation type sub-fields and optional
code of "special" symbols.
http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf
page 40
The patch implements support of the MIPS64 relocation record format in
yaml2obj/obj2yaml tools by introducing new optional Relocation fields:
Type2, Type3, and SpecSym. These fields are recognized only if the
object/YAML file relates to the MIPS64 target.
Differential Revision: http://reviews.llvm.org/D7136
llvm-svn: 227044
Summary:
Shift an older “invalid file” test to get a consistent naming for these tests.
Bugs found by afl-fuzz
Reviewers: rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6945
llvm-svn: 226219
Summary: This fixes the exports iterator if the export list is empty.
Reviewers: Bigcheese, kledzik
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6732
llvm-svn: 224563
Summary: Add rpath load command support in Mach-O object and update llvm-objdump to use it.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6512
llvm-svn: 223343
For historical reasons archives on mach-o have two possible names for the
file containing the table of contents for the archive: "__.SYMDEF SORTED"
and "__.SYMDEF". But the libObject archive reader only supported the former.
This patch fixes llvm::object::Archive to support both names.
llvm-svn: 221747
The ELF symbol `st_other` field might contain additional flags besides
visibility ones. This patch implements support for some MIPS specific
flags.
llvm-svn: 221491
add the code and test cases for 32-bit ARM symbolizer.
Also fixed the printing of data in code as it was not using the table correctly
and needed to fix one of the test cases too.
This will break lld’s test/mach-o/arm-interworking-movw.yaml till the tweak
for that is made. Which I’ll be committing immediately after this commit.
llvm-svn: 221470
Use the position of the subsequent symbol in the object file to infer
the size of it's predecessor. I hope to eventually remove whatever COFF
specific details from this little algorithm so that we can unify this
logic with what Mach-O does.
llvm-svn: 221444
The MRI scripts have to work with CRLF, and in general it is probably
a good idea to support this in a core utility like LineIterator.
llvm-svn: 221153
Summary: This helps llvm-objdump -r to print out the symbol name along
with the relocation type on x86. Adjust existing tests from checking
for "Unknown" to check for the symbol now.
Test Plan: Adjusted test/Object tests.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5987
llvm-svn: 220866
I was quiet surprised to find this feature being used. Fortunately the uses
I found look fairly simple. In fact, they are just a very verbose version
of the regular ar commands.
Start implementing it then by parsing the script and setting the command
variables as if we had a regular command line.
This patch adds just enough support to create an empty archive and do a bit
of error checking. In followup patches I will implement at least addmod
and addlib.
From the description in the manual, even the more general case should not
be too hard to implement if needed. The features that don't map 1:1 to
the simple command line are
* Reading from multiple archives.
* Creating multiple archives.
llvm-svn: 219521
Long section names are represented as a slash followed by a numeric
ASCII string. This number is an offset into a string table.
Print the appropriate entry in the string table instead of the less
enlightening /4.
N.B. yaml2obj already does the right thing, this test exercises both
sides of the (de-)serialization.
llvm-svn: 219458
The code is buggy and barely tested. It is also mostly boilerplate.
(This includes MCObjectDisassembler, which is the interface to that
functionality)
Following an IRC discussion with Jim Grosbach, it seems sensible to just
nuke the whole lot of functionality, and dig it up from VCS if
necessary (I hope not!).
All of this stuff appears to have been added in a huge patch dump (look
at the timeframe surrounding e.g. r182628) where almost every patch
seemed to be untested and not reviewed before being committed.
Post-review responses to the patches were never addressed. I don't think
any of it would have passed pre-commit review.
I doubt anyone is depending on this, since this code appears to be
extremely buggy. In limited testing that Michael Spencer and I did, we
couldn't find a single real-world object file that wouldn't crash the
CFG reconstruction stuff. The symbolizer stuff has O(n^2) behavior and
so is not much use to anyone anyway. It seemed simpler to remove them as
a whole. Most of this code is boilerplate, which is the only way it was
able to scrape by 60% coverage.
HEADSUP: Modules folks, some files I nuked were referenced from
include/llvm/module.modulemap; I just deleted the references. Hopefully
that is the right fix (one was a FIXME though!).
llvm-svn: 216983
Before this patch we had
@a = weak global ...
but
@b = alias weak ...
The patch changes aliases to look more like global variables.
Looking at some really old code suggests that the reason was that the old
bison based parser had a reduction for alias linkages and another one for
global variable linkages. Putting the alias first avoided the reduce/reduce
conflict.
The days of the old .ll parser are long gone. The new one parses just "linkage"
and a later check is responsible for deciding if a linkage is valid in a
given context.
llvm-svn: 214355
The -print-file-name option in llvm-nm is to precede each symbol
with the object file it came from. While code for the parsing of this
option and its aliases existed there was no code to implement it.
llvm-svn: 213906
the specified section. This is same functionality as darwin’s nm(1) "-s" flag.
There is one FIXME in the code and I’m all ears to anyone that can help me
with that. This option takes exactly two strings and should be allowed
anywhere on the command line. Such that "llvm-nm -s __TEXT __text foo.o"
would work. But that does not as the CommandLine Library does not have a
way to make this work as far as I can tell. For now the "-s __TEXT __text"
has to be last on the command line.
llvm-svn: 212842
This will allow the "-s" flag to implemented in the future as it
is in darwin’s nm(1) to list symbols only in the specified section.
Given a LGTM by Shankar Easwaran who originally implemented
the support for lvm-nm’s -print-armap and archive map symbols.
llvm-svn: 212576
It is not clear if llvm.global_ctors should or should not be in llvm.metadata,
but in practice it is not and we need to ignore it for LTO.
llvm-svn: 212351
symbol’s name. On darwin the -j flag is used (often in combinations
with other flags) to produce a complete list of symbol names which
than can then be reorder and used with ld(1)’s -order_file.
llvm-svn: 212294
This should allow llvm-ar to be used instead of gnu ar + plugin in a LTO
build. I will add a release note about it once I finish a LTO bootstrap with it.
llvm-svn: 212287
Sanjoy Das