This diff adds documentation for `allow-empty` flag under FileCheck
docs.
Reviewed by jhenderson, smeenai, thopre
Differential Revision: https://reviews.llvm.org/D83682
This came up during the review for D67656. It's nice but also subtle, so documenting it as an idiom will make tests easier to understand.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D68061
for the advantage outlined by D83639 ([OptTable] Support grouped short options)
Some behavior changes:
* -i={0,false} is removed. Use --no-inlines instead.
* --demangle={0,false} is removed. Use --no-demangle instead
* -untag-addresses={0,false} is removed. Use --no-untag-addresses instead
Added a higher level API OptTable::parseArgs which handles optional
initial options populated from an environment variable, expands response
files recursively, and parses options.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83530
PGO profile is usually more precise than sample profile. However, PGO profile
needs to be collected from loadtest and loadtest may not be representative
enough to the production workload. Sample profile collected from production
can be used as a supplement -- for functions cold in loadtest but warm/hot
in production, we can scale up the related function in PGO profile if the
function is warm or hot in sample profile.
The implementation contains changes in compiler side and llvm-profdata side.
Given an instr profile and a sample profile, for a function cold in PGO
profile but warm/hot in sample profile, llvm-profdata will either mark
all the counters in the profile to be -1 or scale up the max count in the
function to be above hot threshold, depending on the zero counter ratio in
the profile. The assumption is if there are too many counters being zero
in the function profile, the profile is more likely to cause harm than good,
then llvm-profdata will mark all the counters to be -1 indicating the
function is hot but the profile is unaccountable. In compiler side, if a
function profile with all -1 counters is seen, the function entry count will
be set to be above hot threshold but its internal profile will be dropped.
In the long run, it may be useful to let compiler support using PGO profile
and sample profile at the same time, but that requires more careful design
and more substantial changes to make two profiles work seamlessly. The patch
here serves as a simple intermediate solution.
Differential Revision: https://reviews.llvm.org/D81981
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
New change: check for existence of field `cycles` in perf_branch_entry before enabling this mode.
This should prevent compilation errors when building for older kernel whose headers don't support it.
Add support for creating static libraries when the input includes only
Mach-O binaries (and not libraries/archives themselves).
Reviewed by alexshap, Ktwu, smeenai, jhenderson, MaskRay, mtrent
Differential Revision: https://reviews.llvm.org/D83002
Its effect could be achieved by
`-stop-after`,`-print-after`,`-print-after-all`. But a few tests need to
print MIR after ISel which could not be done with
`-print-after`/`-stop-after` since isel pass does not have commandline name.
That's the reason `--print-machineinstrs` is downgraded to
`--print-after-isel` in this patch. `--print-after-isel` could be
removed after we switch to new pass manager since isel pass would have a
commandline text name to use `print-after` or equivalent switches.
The motivation of this patch is to reduce tests dependency on
would-be-deprecated feature.
Reviewed By: arsenm, dsanders
Differential Revision: https://reviews.llvm.org/D83275
This patch changes llvm-readelf (and llvm-readobj for consistency)
behavior to print an error when executed with no input files.
Reading from stdin can be achieved via a '-' for the input
object.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46400
Differential Revision: https://reviews.llvm.org/D83704
Reviewed by: jhenderson, MaskRay, sbc, jyknight
This diff starts the implementation of llvm-libtool-darwin
(an llvm based replacement of cctool's libtool).
Libtool is used for creating static and dynamic libraries
from a bunch of object files given as input.
Reviewed by alexshap, smeenai, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D82923
From @erichkeane:
```
This patch doesn't seem to build for me:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp: In function ‘llvm::Error llvm::exegesis::parseDataBuffer(const char*, size_t, const void*, const void*, llvm::SmallVector<long int, 4>*)’:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp:99:37: error: ‘struct perf_branch_entry’ has no member named ‘cycles’
CycleArray->push_back(Entry.cycles);
I'm on RHEL7, so I have kernel 3.10, so it doesn't have 'cycles'.
According ot this: https://elixir.bootlin.com/linux/v4.3/source/include/uapi/linux/perf_event.h#L963 kernel 4.3 is the first time that 'cycles' appeared in this structure.
```
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
In FileCheck.rst, add `-dump-input-context` and `-dump-input-filter`,
and fix some `-dump-input` documentation.
In `FileCheck -help`, `cl::value_desc("kind")` is being ignored for
`-dump-input-filter`, so just drop it.
Extend `-dump-input=help` to mention FILECHECK_OPTS.
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Differential revision: https://reviews.llvm.org/D70720
Before the fix the build of docs-llvm-html would fail.
The D80959 introduced options that are not recognized, so we have
warning as:
llvm-project/llvm/docs/CommandGuide/llvm-dwarfdump.rst:40\
:unknown option: --debug-info
Differential Revision: https://reviews.llvm.org/D82460
Summary: Rename --elf-cg-profile to --cg-profile and keep --elf-cg-profile as an alias of --cg-profile.
Reviewers: jhenderson, MaskRay, espindola, hans
Reviewed By: jhenderson, MaskRay
Subscribers: emaste, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81855
Summary:
This completes the needed glueing to support reading tbd files from nm.
This includes specifying which slice filtering with `--arch` and a new
option specifically for tbd files `--add-inlinedinfo` which will show
the reexported libraries that are appended in the tbd file.
Reviewers: ributzka, steven_wu, JDevlieghere, jhenderson
Reviewed By: JDevlieghere
Subscribers: hiraditya, MaskRay, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81614
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support for specifying the
matching constraint for a numeric expression, ie. how the value being
matched should relate to the numeric expression.
This commit only adds the equality constraint where the numeric value
matched must be equal to the numeric expression. It is the default
matching constraint used when not specified. It is added to provision
other matching constraint (e.g. inequality relations).
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D60391
This patch extends numerical expressions to allow calls to
predefined functions. These calls can be combined with the
existing numerical operators, which includes nesting calls.
The call syntax is:
<func>(<args>)
Where <func> is a predefined string literal, currently limited to
one of add, max, min and sub. <arg> is a comma seperated list of
numerical expressions.
Subscribers: arichardson, hiraditya, thopre, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79936
Having the input dumped on failure seems like a better
default: I debugged FileCheck tests for a while without knowing
about this option, which really helps to understand failures.
Remove `-dump-input-on-failure` and the environment variable
FILECHECK_DUMP_INPUT_ON_FAILURE which are now obsolete.
Differential Revision: https://reviews.llvm.org/D81422
Some of the --debug-* options can take an optional offset. Although the
man page does a good job of making that clear, it's much harder to
discover from the help output.
Currently the only reference to this is the following sentence:
> Where applicable these parameters take an optional =<offset> argument
> to dump only the entry at the specified offset.
This patch changes the help output from to print [=<offset>] after the
options that take an offset.
--debug-info[=<offset>] - Dump the .debug_info section
rdar://problem/63150066
Differential revision: https://reviews.llvm.org/D80959
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support signed numeric
values, thus allowing negative numeric values.
As such, the patch adds a new class to represent a signed or unsigned
value and add the logic for type promotion and type conversion in
numeric expression mixing signed and unsigned values. It also adds
the %d format specifier to represent signed value.
Finally, it also adds underflow and overflow detection when performing a
binary operation.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson
Reviewed By: jhenderson, arichardson
Subscribers: MaskRay, hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60390
With this change it is be possible to write FileCheck expressions such
as [[#(VAR+1)-2]]. Currently, the only supported arithmetic operators are
plus and minus, so this is not particularly useful yet. However, it our
CHERI fork we have tests that benefit from having multiplication in
FileCheck expressions. Allowing parenthesized expressions is the simplest
way for us to work around the current lack of operator precedence in
FileCheck expressions.
Reviewed By: thopre, jhenderson
Differential Revision: https://reviews.llvm.org/D77383
cctools strip has the option "-T" which removes Swift symbols.
This diff implements this option in llvm-strip for MachO.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D80099
llvm-extract get serveral new options, but we forgot to update doc.
This patch update the doc.
Reviewed By: volkan
Differential Revision: https://reviews.llvm.org/D80413
Add support for generating a dsymutil reproducer. The result is a folder
containing all the object files for linking.
When --gen-reproducer is passed, dsymutil uses a FileCollectorFileSystem
which keeps track of all the files used by dsymutil. These files are
copied into a temporary directory when dsymutil exists.
When this path is passed to --use-reproducer, dsymutil uses a
RedirectingFileSystem that will use the files from the reproducer
directory instead of the actual paths. This means you don't need to mess
with the OSO path prefix.
Differential revision: https://reviews.llvm.org/D79398
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
This patch adds statistics about the contribution of each object file to
the linked debug info. When --statistics is passed to dsymutil, it
prints a table after linking as illustrated below.
It lists the object file name, the size of the debug info in the object
file in bytes, and the absolute size contribution to the linked dSYM and
the percentage difference. The table is sorted by the output size, so
the object files contributing the most to the link are listed first.
.debug_info section size (in bytes)
-------------------------------------------------------------------------------
Filename Object dSYM Change
-------------------------------------------------------------------------------
basic2.macho.x86_64.o 210b 165b -24.00%
basic3.macho.x86_64.o 177b 150b -16.51%
basic1.macho.x86_64.o 125b 129b 3.15%
-------------------------------------------------------------------------------
Total 512b 444b -14.23%
-------------------------------------------------------------------------------
Differential revision: https://reviews.llvm.org/D79513
The --output-target documentation has slightly rotted, as the default is
no longer purely based on the input file format, but also the value of
--input-target. This patch updates the documentation to make this
explicit.
Reviewed by: MaskRay, alexshap
Differential Revision: https://reviews.llvm.org/D79318
This addresses:
-Clean up the source code
-Refactor the JSON fields
-Fix the test cases
-Improve the docs for the stats output
Differential Revision: https://reviews.llvm.org/D77789
Summary:
FileCheck documentation contains an example of a numeric variable
defined and used on the same line. This is not currently supported by
FileCheck so this commit fixes the example to use CHECK-SAME for the
variable use.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D79253
This option was added several months ago in commit e84468c1.
Reviewed by: MaskRay, erik.pilkington, steven_wu
Differential Revision: https://reviews.llvm.org/D79166
This change helps improve `dsymutil` documentation.
- Add missing options
- Re-arrange options in alphabetical order
- Wrap inline options in double-back-quote
- `-v` is for `--version` not `--verbose`
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D78479
Summary:
This matches the behavior of GNU addr2line. We previously treated
hexadecimal addresses as binary if they started with 0b, otherwise as
octal if they started with 0, otherwise as decimal.
This only affects llvm-addr2line; the behavior of llvm-symbolize is
unaffected.
Reviewers: ikudrin, rupprecht, jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73306
LanguageExtensions.rst:2191: WARNING: Title underline too short.
llvm-symbolizer.rst:157: Error in "code-block" directive: maximum 1 argument(s) allowed, 30 supplied.
This patch adds missing description of enable-no-signed-zeros-fp-math
and enable-no-trapping-fp-math options of llc.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D77713
The LitConfig is shared across the whole test suite. However, since
enabling recursive expansion can be a breaking change for some test
suites, it's important to confine the setting to test suites that
enable it explicitly.
Note that other issues were raised with the way recursiveExpansionLimit
operates. However, this commit simply moves the setting to the right
place -- the mechanism by which it works can be improved independently.
Differential Revision: https://reviews.llvm.org/D77415
SUMMARY:
For the llvm-objdump -D, the symbol name is used as a label in the disassembly for the specific address (when a symbol address is equal to the virtual address in the dump).
In XCOFF, multiple symbols may have the same name, being differentiated by their storage mapping class. It is helpful to print the QualName and not just the name when forming the output label for a csect symbol. The symbol index further removes any ambiguity caused by duplicate names.
To maintain compatibility with the binutils objdump, the XCOFF-specific --symbol-description option is added to enable the enhanced format.
Reviewers: hubert.reinterpretcast, James Henderson, Jason Liu ,daltenty
Subscribers: wuzish, nemanjai, hiraditya
Differential Revision: https://reviews.llvm.org/D72973
Summary:
This patch is to teach `llvm-objdump` dump dynamic symbols (`-T` and `--dynamic-syms`). Currently, this patch is not fully compatible with `gnu-objdump`, but I would like to continue working on this in next few patches. It has two issues.
1. Some symbols shouldn't be marked as global(g). (`-t/--syms` has same issue as well) (Fixed by D75659)
2. `gnu-objdump` can dump version information and *dynamically* insert before symbol name field.
`objdump -T a.out` gives:
```
DYNAMIC SYMBOL TABLE:
0000000000000000 w D *UND* 0000000000000000 _ITM_deregisterTMCloneTable
0000000000000000 DF *UND* 0000000000000000 GLIBC_2.2.5 printf
0000000000000000 DF *UND* 0000000000000000 GLIBC_2.2.5 __libc_start_main
0000000000000000 w D *UND* 0000000000000000 __gmon_start__
0000000000000000 w D *UND* 0000000000000000 _ITM_registerTMCloneTable
0000000000000000 w DF *UND* 0000000000000000 GLIBC_2.2.5 __cxa_finalize
```
`llvm-objdump -T a.out` gives:
```
DYNAMIC SYMBOL TABLE:
0000000000000000 w D *UND* 0000000000000000 _ITM_deregisterTMCloneTable
0000000000000000 g DF *UND* 0000000000000000 printf
0000000000000000 g DF *UND* 0000000000000000 __libc_start_main
0000000000000000 w D *UND* 0000000000000000 __gmon_start__
0000000000000000 w D *UND* 0000000000000000 _ITM_registerTMCloneTable
0000000000000000 w DF *UND* 0000000000000000 __cxa_finalize
```
Reviewers: jhenderson, grimar, MaskRay, espindola
Reviewed By: jhenderson, grimar
Subscribers: emaste, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75756
Add an option to llvm-dwarfdump to calculate the bytes within
the debug sections. Dump this numbers when using --statistics
option as well.
This is an initial patch (e.g. we should support other units,
since we only support 'bytes' now).
Differential Revision: https://reviews.llvm.org/D74205
Summary:
As noted in documentation, different repetition modes have different trade-offs:
> .. option:: -repetition-mode=[duplicate|loop]
>
> Specify the repetition mode. `duplicate` will create a large, straight line
> basic block with `num-repetitions` copies of the snippet. `loop` will wrap
> the snippet in a loop which will be run `num-repetitions` times. The `loop`
> mode tends to better hide the effects of the CPU frontend on architectures
> that cache decoded instructions, but consumes a register for counting
> iterations.
Indeed. Example:
>>! In D74156#1873657, @lebedev.ri wrote:
> At least for `CMOV`, i'm seeing wildly different results
> | | Latency | RThroughput |
> | duplicate | 1 | 0.8 |
> | loop | 2 | 0.6 |
> where latency=1 seems correct, and i'd expect the througput to be close to 1/2 (since there are two execution units).
This isn't great for analysis, at least for schedule model development.
As discussed in excruciating detail in
>>! In D74156#1924514, @gchatelet wrote:
>>>! In D74156#1920632, @lebedev.ri wrote:
>> ... did that explanation of the question i'm having made any sense?
>
> Thx for digging in the conversation !
> Ok it makes more sense now.
>
> I discussed it a bit with @courbet:
> - We want the analysis tool to stay simple so we'd rather not make it knowledgeable of the repetition mode.
> - We'd like to still be able to select either repetition mode to dig into special cases
>
> So we could add a third `min` repetition mode that would run both and take the minimum. It could be the default option.
> Would you have some time to look what it would take to add this third mode?
there appears to be an agreement that it is indeed sub-par,
and that we should provide an optional, measurement (not analysis!) -time
way to rectify the situation.
However, the solutions isn't entirely straight-forward.
We can just add an actual 'multiplexer' `MinSnippetRepetitor`, because
if we just concatenate snippets produced by `DuplicateSnippetRepetitor`
and `LoopSnippetRepetitor` and run+measure that, the measurement will
naturally be different from what we'd get by running+measuring
them separately and taking the min.
([[ https://www.wolframalpha.com/input/?i=%28x%2By%29%2F2+%21%3D+min%28x%2C+y%29 | `time(D+L)/2 != min(time(D), time(L))` ]])
Also, it seems best to me to have a single snippet instead of generating
a snippet per repetition mode, since the only difference here is that the
loop repetition mode reserves one register for loop counter.
As far as i can tell, we can either teach `BenchmarkRunner::runConfiguration()`
to produce a single report given multiple repetitors (as in the patch),
or do that one layer higher - don't modify `BenchmarkRunner::runConfiguration()`,
produce multiple reports, don't actually print each one, but aggregate them somehow
and only print the final one.
Initially i've gone ahead with the latter approach, but it didn't look like a natural fit;
the former (as in the diff) does seem like a better fit to me.
There's also a question of the test coverage. It sure currently does work here:
```
$ ./bin/llvm-exegesis --opcode-name=CMOV64rr --mode=inverse_throughput --repetition-mode=duplicate
Check generated assembly with: /usr/bin/objdump -d /tmp/snippet-8fb949.o
---
mode: inverse_throughput
key:
instructions:
- 'CMOV64rr RAX RAX R11 i_0x0'
- 'CMOV64rr RBP RBP R15 i_0x0'
- 'CMOV64rr RBX RBX RBX i_0x0'
- 'CMOV64rr RCX RCX RBX i_0x0'
- 'CMOV64rr RDI RDI R10 i_0x0'
- 'CMOV64rr RDX RDX RAX i_0x0'
- 'CMOV64rr RSI RSI RAX i_0x0'
- 'CMOV64rr R8 R8 R8 i_0x0'
- 'CMOV64rr R9 R9 RDX i_0x0'
- 'CMOV64rr R10 R10 RBX i_0x0'
- 'CMOV64rr R11 R11 R14 i_0x0'
- 'CMOV64rr R12 R12 R9 i_0x0'
- 'CMOV64rr R13 R13 R12 i_0x0'
- 'CMOV64rr R14 R14 R15 i_0x0'
- 'CMOV64rr R15 R15 R13 i_0x0'
config: ''
register_initial_values:
- 'RAX=0x0'
- 'R11=0x0'
- 'EFLAGS=0x0'
- 'RBP=0x0'
- 'R15=0x0'
- 'RBX=0x0'
- 'RCX=0x0'
- 'RDI=0x0'
- 'R10=0x0'
- 'RDX=0x0'
- 'RSI=0x0'
- 'R8=0x0'
- 'R9=0x0'
- 'R14=0x0'
- 'R12=0x0'
- 'R13=0x0'
cpu_name: bdver2
llvm_triple: x86_64-unknown-linux-gnu
num_repetitions: 10000
measurements:
- { key: inverse_throughput, value: 0.819, per_snippet_value: 12.285 }
error: ''
info: instruction has tied variables, using static renaming.
assembled_snippet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
...
$ ./bin/llvm-exegesis --opcode-name=CMOV64rr --mode=inverse_throughput --repetition-mode=loop
Check generated assembly with: /usr/bin/objdump -d /tmp/snippet-051eb3.o
---
mode: inverse_throughput
key:
instructions:
- 'CMOV64rr RAX RAX R11 i_0x0'
- 'CMOV64rr RBP RBP RSI i_0x0'
- 'CMOV64rr RBX RBX R9 i_0x0'
- 'CMOV64rr RCX RCX RSI i_0x0'
- 'CMOV64rr RDI RDI RBP i_0x0'
- 'CMOV64rr RDX RDX R9 i_0x0'
- 'CMOV64rr RSI RSI RDI i_0x0'
- 'CMOV64rr R9 R9 R12 i_0x0'
- 'CMOV64rr R10 R10 R11 i_0x0'
- 'CMOV64rr R11 R11 R9 i_0x0'
- 'CMOV64rr R12 R12 RBP i_0x0'
- 'CMOV64rr R13 R13 RSI i_0x0'
- 'CMOV64rr R14 R14 R14 i_0x0'
- 'CMOV64rr R15 R15 R10 i_0x0'
config: ''
register_initial_values:
- 'RAX=0x0'
- 'R11=0x0'
- 'EFLAGS=0x0'
- 'RBP=0x0'
- 'RSI=0x0'
- 'RBX=0x0'
- 'R9=0x0'
- 'RCX=0x0'
- 'RDI=0x0'
- 'RDX=0x0'
- 'R12=0x0'
- 'R10=0x0'
- 'R13=0x0'
- 'R14=0x0'
- 'R15=0x0'
cpu_name: bdver2
llvm_triple: x86_64-unknown-linux-gnu
num_repetitions: 10000
measurements:
- { key: inverse_throughput, value: 0.6083, per_snippet_value: 8.5162 }
error: ''
info: instruction has tied variables, using static renaming.
assembled_snippet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
...
$ ./bin/llvm-exegesis --opcode-name=CMOV64rr --mode=inverse_throughput --repetition-mode=min
Check generated assembly with: /usr/bin/objdump -d /tmp/snippet-c7a47d.o
Check generated assembly with: /usr/bin/objdump -d /tmp/snippet-2581f1.o
---
mode: inverse_throughput
key:
instructions:
- 'CMOV64rr RAX RAX R11 i_0x0'
- 'CMOV64rr RBP RBP R10 i_0x0'
- 'CMOV64rr RBX RBX R10 i_0x0'
- 'CMOV64rr RCX RCX RDX i_0x0'
- 'CMOV64rr RDI RDI RAX i_0x0'
- 'CMOV64rr RDX RDX R9 i_0x0'
- 'CMOV64rr RSI RSI RAX i_0x0'
- 'CMOV64rr R9 R9 RBX i_0x0'
- 'CMOV64rr R10 R10 R12 i_0x0'
- 'CMOV64rr R11 R11 RDI i_0x0'
- 'CMOV64rr R12 R12 RDI i_0x0'
- 'CMOV64rr R13 R13 RDI i_0x0'
- 'CMOV64rr R14 R14 R9 i_0x0'
- 'CMOV64rr R15 R15 RBP i_0x0'
config: ''
register_initial_values:
- 'RAX=0x0'
- 'R11=0x0'
- 'EFLAGS=0x0'
- 'RBP=0x0'
- 'R10=0x0'
- 'RBX=0x0'
- 'RCX=0x0'
- 'RDX=0x0'
- 'RDI=0x0'
- 'R9=0x0'
- 'RSI=0x0'
- 'R12=0x0'
- 'R13=0x0'
- 'R14=0x0'
- 'R15=0x0'
cpu_name: bdver2
llvm_triple: x86_64-unknown-linux-gnu
num_repetitions: 10000
measurements:
- { key: inverse_throughput, value: 0.6073, per_snippet_value: 8.5022 }
error: ''
info: instruction has tied variables, using static renaming.
assembled_snippet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
...
```
but i open to suggestions as to how test that.
I also have gone with the suggestion to default to this new mode.
This was irking me for some time, so i'm happy to finally see progress here.
Looking forward to feedback.
Reviewers: courbet, gchatelet
Reviewed By: courbet, gchatelet
Subscribers: mstojanovic, RKSimon, llvm-commits, courbet, gchatelet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76921
This allows defining substitutions in terms of other substitutions. For
example, a %build substitution could be defined in terms of a %cxx
substitution as '%cxx %s -o %t.exe' and the script would be properly
expanded.
Differential Revision: https://reviews.llvm.org/D76178
to remap object file paths (but no source paths) before
processing. This is meant to be used for Clang objects where the
module cache location was remapped using ``-fdebug-prefix-map``; to
help dsymutil find the Clang module cache.
<rdar://problem/55685132>
Differential Revision: https://reviews.llvm.org/D76391
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Currently, this only works for object files, not executables or shared
libraries.
Differential revision: https://reviews.llvm.org/D70720
The examples for different options were inconsistently indented in
the HTML display. As they are tied to the options, this change
normalises to indent them the same as the option description body.
"--functions none" and "--functions=none" are not the same. One is the
option "--functions" with its default value of "linkage", followed by an
input address of "none", and the other is "--functions" with the value
"none". This patch fixes the doc to match the actual behaviour by adding
an extra '=' sign in the allowed values description.
Summary:
gnu addr2line prints DWARF line table discriminators like so:
<file>:<line> (discriminator <Number>)
This matches that behavior.
Document how and when --output-style=GNU prints discriminators
Add test for new GNU-style discriminator printing.
Reviewers: rupprecht, labath, jhenderson
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73318
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support for selecting a
matching format to match a numeric value against (ie. decimal, hex lower
case letters or hex upper case letters).
This commit allows to select what format a numeric value should be
matched against. The following formats are supported: decimal value,
lower case hex value and upper case hex value. Matching formats impact
both the format of numeric value to be matched as well as the format of
accepted numbers in a definition with empty numeric expression
constraint.
Default for absence of format is decimal value unless the numeric
expression constraint is non null and use a variable in which case the
format is the one used to define that variable. Conclict of format in
case of several variable being used is diagnosed and forces the user to
select a matching format explicitely.
This commit also enables immediates in numeric expressions to be in any
radix known to StringRef's GetAsInteger method, except for legacy
numeric expressions (ie [[@LINE+<offset>]] which only support decimal
immediates.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson
Reviewed By: jhenderson, arichardson
Subscribers: daltenty, MaskRay, hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60389
The sub-heading used to contain the --only-keep-debug switch as that
switch wasn't implemented for ELF at one point. Since the switch is now
in the generic options section, and there are no other options in this
sub-heading, it is pointless and can be deleted.
When using the option, draw the histogram representing the debug
location buckets. The resulting histogram will be saved in a png
file.
Differential Revision: https://reviews.llvm.org/D71869
Making these changes, the code becomes more robust and easier for
adding the new features.
-Introduce the LocationStats class representing the statistics
-Add the pretty_print() method in the LocationStats class
-Add additional '-' for the program options
-Add the verify_program_inputs() function
-Add the parse_locstats() function
-Rename 'results' => 'opts'
-Add more comments
Differential Revision: https://reviews.llvm.org/D71868
llvm-symbolizer is used by sanitizers to symbolize errors discovered by
sanitizer, but there's no way to pass options to llvm-symbolizer since
the tool is invoked directly by the sanitizer runtime. Therefore, we
don't have a way to pass options needed to find debug symbols such as
-dsym-hint or -debug-file-directory. This change enables reading options
from the LLVM_SYMBOLIZER_OPTS in addition to command line which can be
used to pass those additional options to llvm-symbolizer invocations
made by sanitizer runtime.
Differential Revision: https://reviews.llvm.org/D71668
Remappings involving extern "C" names were already supported in the
context of <local-name>s, but this support didn't work for remapping the
complete mangling itself. (Eg, we would remap X<foo> but not foo itself,
if foo is an extern "C" function.)
Summary:
This is a follow up for D70548.
Currently, variables with debug info coverage between 0% and 1% are put into
zero-bucket. D70548 changed the way statistics calculate a variable's coverage:
we began to use enclosing scope rather than a possible variable life range.
Thus more variables might be moved to zero-bucket despite they have some debug
info coverage.
The patch is to distinguish between a variable that has location info but
it's significantly less than its enclosing scope and a variable that doesn't
have it at all.
Reviewers: djtodoro, aprantl, dblaikie, avl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71070
Summary:
This changes the representation of 'coverage buckets' in llvm-dwarfdump and
llvm-locstats to one that makes more clear what the buckets contain.
See some related details in D71070.
Reviewers: djtodoro, aprantl, cmtice, jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71366
The parsing error tests in ELF/redefine-symbols.test are not specific to ELF.
Move them to redefine-symbols.test.
Add COFF/redefine-symbols.test for COFF specific tests.
Also fix the documentation regarding --redefine-syms: the old and new
names are separated by whitespace, not an equals sign.
Reviewed By: mstorsjo
Differential Revision: https://reviews.llvm.org/D70036
--only-keep-debug produces a debug file as the output that only
preserves contents of sections useful for debugging purposes (the
binutils implementation preserves SHT_NOTE and non-SHF_ALLOC sections),
by changing their section types to SHT_NOBITS and rewritting file
offsets.
See https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html
The intended use case is:
```
llvm-objcopy --only-keep-debug a a.dbg
llvm-objcopy --strip-debug a b
llvm-objcopy --add-gnu-debuglink=a.dbg b
```
The current layout algorithm is incapable of deleting contents and
shrinking segments, so it is not suitable for implementing the
functionality.
This patch adds a new algorithm which assigns sh_offset to sections
first, then modifies p_offset/p_filesz of program headers. It bears a
resemblance to lld/ELF/Writer.cpp.
Reviewed By: jhenderson, jakehehrlich
Differential Revision: https://reviews.llvm.org/D67137
This works around a bug in Debian's patchset for glibc. The bug is
described in detail in the upstream debian bug:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=943798, but the short
version of it is that glibc on any Debian based distro don't load
libraries unless it has a .ARM.attribute section.
Reviewed by: jhenderson, rupprecht, MaskRay, jakehehrlich
Differential Revision: https://reviews.llvm.org/D69188
Patch by Tobias Hieta.
Add the `-whitelist-filename-regex` option to restrict coverage
reporting to file paths that match a whitelist regex.
Patch by Michael Daniels!
rdar://56720320
The llvm-ar command guide had not been updated in some time, it was
missing current functionality and contained information that was out
of date. This change:
- Updates the use of reStructuredText directives, as seen in other tools
command guides.
- Updates the command synopsis.
- Updates the descriptions of the tool behaviour.
- Updates the options section.
- Adds details of MRI script functionality.
- Removes the sections "Standards" and "File Format"
Differential Revision: https://reviews.llvm.org/D68998
llvm-svn: 375412
Summary: GNU objcopy accepts the --wildcard flag to allow wildcard matching on symbol-related flags. (Note: it's implicitly true for section flags).
The basic syntax is to allow *, ?, \, and [] which work similarly to how they work in a shell. Additionally, starting a wildcard with ! causes that wildcard to prevent it from matching a flag.
Use an updated GlobPattern in libSupport to handle these patterns. It does not fully match the `fnmatch` used by GNU objcopy since named character classes (e.g. `[[:digit:]]`) are not supported, but this should support most existing use cases (mostly just `*` is what's used anyway).
Reviewers: jhenderson, MaskRay, evgeny777, espindola, alexshap
Reviewed By: MaskRay
Subscribers: nickdesaulniers, emaste, arichardson, hiraditya, jakehehrlich, abrachet, seiya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66613
llvm-svn: 375169
Since GNU ar 2.31, the 't' operation prints member offsets beside file
names if the 'O' modifier is specified. 'O' is ignored for thin
archives.
Reviewed By: gbreynoo, ruiu
Differential Revision: https://reviews.llvm.org/D69087
llvm-svn: 375106
When on windows gnu-ar treats member names as case insensitive. This
commit implements the same behaviour.
Differential Revision: https://reviews.llvm.org/D68033
llvm-svn: 375002
The FileCheck utility is enhanced to support a `--ignore-case`
option. This is useful in cases where the output of Unix tools
differs in case (e.g. case not specified by Posix).
Reviewers: Bigcheese, jakehehrlich, rupprecht, espindola, alexshap, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D68146
llvm-svn: 374538
Bring back `--threads` option which was lost in the move of the
command line argument parsing code to cl_arguments.py. Update docs
since `--workers` is preferred.
llvm-svn: 374432
Summary:
As disscused in https://bugs.llvm.org/show_bug.cgi?id=43219,
i believe it may be somewhat useful to show //some// aggregates
over all the sea of statistics provided.
Example:
```
Average Wait times (based on the timeline view):
[0]: Executions
[1]: Average time spent waiting in a scheduler's queue
[2]: Average time spent waiting in a scheduler's queue while ready
[3]: Average time elapsed from WB until retire stage
[0] [1] [2] [3]
0. 3 1.0 1.0 4.7 vmulps %xmm0, %xmm1, %xmm2
1. 3 2.7 0.0 2.3 vhaddps %xmm2, %xmm2, %xmm3
2. 3 6.0 0.0 0.0 vhaddps %xmm3, %xmm3, %xmm4
3 3.2 0.3 2.3 <total>
```
I.e. we average the averages.
Reviewers: andreadb, mattd, RKSimon
Reviewed By: andreadb
Subscribers: gbedwell, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68714
llvm-svn: 374361
The FileCheck utility is enhanced to support a `--ignore-case`
option. This is useful in cases where the output of Unix tools
differs in case (e.g. case not specified by Posix).
Reviewers: Bigcheese, jakehehrlich, rupprecht, espindola, alexshap, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D68146
llvm-svn: 374339
Summary:
This adds a `-max-configs-per-opcode` option to limit the number of
configs per opcode.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68642
llvm-svn: 374054
Fixes PR43181. This option was recently added to GNU objcopy (binutils
PR24942).
`llvm-objcopy -I binary -O elf64-x86-64 --set-section-alignment .data=8` can set the alignment of .data.
Reviewed By: grimar, jhenderson, rupprecht
Differential Revision: https://reviews.llvm.org/D67656
llvm-svn: 373461
The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
Differential Revision: https://reviews.llvm.org/D66526
The cause of the test failure was resolved.
llvm-svn: 373427
The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
Differential Revision: https://reviews.llvm.org/D66526
llvm-svn: 373317
D68110 added --arch-specific (supported by GNU readelf) and made
--arm-attributes an alias for it. The tests were later migrated to use
--arch-specific.
Note, llvm-readelf --arch-specific currently just uses llvm-readobj
style output for ARM attributes. The readelf-style output is not
implemented.
Reviewed By: compnerd, kongyi, rupprecht
Differential Revision: https://reviews.llvm.org/D68196
llvm-svn: 373291
The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
Differential Revision: https://reviews.llvm.org/D66526
llvm-svn: 373183
The --bytes option uses the phrase "printable ASCII characters", but the
description section used simply "printable characters". To avoid any
confusion about locale impacts etc, this change adopts the former's
phrasing in both places. It also fixes a minor grammar issue in the
description.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D68016
llvm-svn: 372865
Main changes are mostly wording of some options, but this change also
fixes a switch reference so that a link is created and moves
--strip-sections into the ELF-specific area since it is only supported
for ELF currently.
llvm-svn: 372864
The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
Differential Revision: https://reviews.llvm.org/D66526
llvm-svn: 372554
Follow-up to r371983. Referring to "this program" in the description of
the --version option in the documentation isn't exactly correct, because
the docs are not part of the program, and so "this program" doesn't
really refer to anything. This patch brings the other users of this
terminology into line with the new updates to llvm-size and
llvm-strings.
Reviewed by: alexshap, MaskRay
Differential Revision: https://reviews.llvm.org/D67618
llvm-svn: 372107
Previously we only had a stub document.
Reviewed by: serge-sans-paille, MaskRay
Differential Revision: https://reviews.llvm.org/D67555
llvm-svn: 371983
GNU objcopy documents that -B is only useful with architecture-less
input (i.e. "binary" or "ihex"). After D67144, -O defaults to -I, and
-B is essentially a NOP.
* If -O is binary/ihex, GNU objcopy ignores -B.
* If -O is elf*, -B provides the e_machine field in GNU objcopy.
So to convert a blob to an ELF, `-I binary -B i386:x86-64 -O elf64-x86-64` has to be specified.
`-I binary -B i386:x86-64 -O elf64-x86-64` creates an ELF with its
e_machine field set to EM_NONE in GNU objcopy, but a regular x86_64 ELF
in elftoolchain elfcopy. Follow the elftoolchain approach (ignoring -B)
to simplify code. Users that expect their command line portable should
specify -B.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D67215
llvm-svn: 371914
llvm-readobj's document was missing --stack-sizes entirely from its
document, so this patch adds it. It also adds a note to the llvm-readelf
description that the switch is only implemented for GNU style output
currently. For reference, --stack-sizes was added in r367942.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D67548
llvm-svn: 371862
Behaviour was recently added to this switch to strip debug sections too.
See r369761.
This change also makes the description for the --strip-unneeded switch
consistent between the two docs.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D67546
llvm-svn: 371855
The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
The tool will be very useful for tracking improvements regarding the
"debugging optimized code" support with LLVM ecosystem.
Differential Revision: https://reviews.llvm.org/D66526
llvm-svn: 371520
Add a mode in which profile read errors are not immediately treated as
fatal. In this mode, merging makes forward progress and reports failure
only if no inputs can be read.
Differential Revision: https://reviews.llvm.org/D66985
llvm-svn: 370827
Summary:
Commit r366897 introduced the possibility to set a variable from an
expression, such as [[#VAR2:VAR1+3]]. While introducing this feature, it
introduced extra logic to allow using such a variable on the same line
later on. Unfortunately that extra logic is flawed as it relies on a
mapping from variable to expression defining it when the mapping is from
variable definition to expression. This flaw causes among other issues
PR42896.
This commit avoids the problem by forbidding all use of a variable
defined on the same line, and removes the now useless logic. Redesign
will be done in a later commit because it will require some amount of
refactoring first for the solution to be clean. One example is the need
for some sort of transaction mechanism to set a variable temporarily and
from an expression and rollback if the CHECK pattern does not match so
that diagnostics show the right variable values.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66141
llvm-svn: 370663
It was causing some errors like:
Encoding error:
'ascii' codec can't decode byte 0xe2 in position 341: ordinal not in range(128)
The full traceback has been saved in /tmp/sphinx-err-y2fq4dtb.log, if you want to report the issue to the developers.
llvm-svn: 369644
Summary:
Linking between markdown and rst files is currently not supported very well, e.g. the current llvm-addr2line docs [1] link to "llvm-symbolizer" instead of "llvm-symbolizer.html". This is weirdly broken in different ways depending on which versions of sphinx and recommonmark are being used, so workaround the bug by using rst everywhere.
[1] http://llvm.org/docs/CommandGuide/llvm-addr2line.html
Reviewers: jhenderson
Reviewed By: jhenderson
Subscribers: lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66305
llvm-svn: 369553
Flag -show-encoding enables the printing of instruction encodings as part of the
the instruction info view.
Example (with flags -mtriple=x86_64-- -mcpu=btver2):
Instruction Info:
[1]: #uOps
[2]: Latency
[3]: RThroughput
[4]: MayLoad
[5]: MayStore
[6]: HasSideEffects (U)
[7]: Encoding Size
[1] [2] [3] [4] [5] [6] [7] Encodings: Instructions:
1 2 1.00 4 c5 f0 59 d0 vmulps %xmm0, %xmm1, %xmm2
1 4 1.00 4 c5 eb 7c da vhaddps %xmm2, %xmm2, %xmm3
1 4 1.00 4 c5 e3 7c e3 vhaddps %xmm3, %xmm3, %xmm4
In this example, column Encoding Size is the size in bytes of the instruction
encoding. Column Encodings reports the actual instruction encodings as byte
sequences in hex (objdump style).
The computation of encodings is done by a utility class named mca::CodeEmitter.
In future, I plan to expose the CodeEmitter to the instruction builder, so that
information about instruction encoding sizes can be used by the simulator. That
would be a first step towards simulating the throughput from the decoders in the
hardware frontend.
Differential Revision: https://reviews.llvm.org/D65948
llvm-svn: 368432
Summary:
The information for -info -thin -create -replace and -segalign flags are added to llvm-lipo.rst
Test Plan:
Reviewers: smeenai, alexshap, compnerd, mtrent
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65676
llvm-svn: 368235
This patch adds a new llvm-mca flag named -print-imm-hex.
By default, the instruction printer prints immediate operands as decimals. Flag
-print-imm-hex enables the instruction printer to print those operands in hex.
This patch also adds support for MASM binary and hex literal numbers (example
0FFh, 101b).
Added tests to verify the behavior of the new flag. Tests also verify that masm
numeric literal operands are now recognized.
Differential Revision: https://reviews.llvm.org/D65588
llvm-svn: 367671
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
> llvm-svn: 366860
llvm-svn: 366897
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
llvm-svn: 366860
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch extend numeric expression to
support an arbitrary number of operands, either variable or literals.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60387
llvm-svn: 366001
Summary: This moves away from defaulting to a.out and uses stdin only if stdin has a file redirected to it. This has been discussed on the llvm-dev mailing list [[ https://lists.llvm.org/pipermail/llvm-dev/2019-July/133642.html | here ]].
Reviewers: jhenderson, rupprecht, MaskRay, chrisjackson
Reviewed By: jhenderson, MaskRay
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64290
llvm-svn: 365889
Some of the wording in the doc (taken largely from the help text), was a
little imprecise in some cases, so this patch makes it a little more
precise.
Reviewed by: JDevlieghere, probinson
Differential Revision: https://reviews.llvm.org/D64332
llvm-svn: 365451
Similar to `FILECHECK_OPTS` for FileCheck, `LIT_OPTS` makes it easy to
adjust lit behavior when running the test suite via ninja. For
example:
```
$ LIT_OPTS='--time-tests -vv --filter=threadprivate' \
ninja check-clang-openmp
```
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D64135
llvm-svn: 365313
We briefly referred to being able to specify --target=binary without
explaining what binary input/output meant. This change adds a section on
this.
Reviewed by: MaskRay, abrachet
Differential Revision: https://reviews.llvm.org/D64245
llvm-svn: 365312
--section-data, --section-relocations and --section-symbols have no
effect for GNU style ouput. This patch changes the docs to point this
out, as it has caught me out on a couple of occasions.
See also https://bugs.llvm.org/show_bug.cgi?id=42522.
llvm-svn: 365221
Summary: Changes "see also" links to use :manpage: instead of plain text or the form `name|name` which was being treated literally, not as a link.
Reviewers: jhenderson, rupprecht
Reviewed By: jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63970
llvm-svn: 365159
The --show-children option description describes what it does, and
references the =<offset> parameter of section dump switches. I don't
think it needs to be explained again in the documentation of the
section dump switches too.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D64132
llvm-svn: 365115
Summary: Removed excess new lines from documentations. As far as I can tell, it seems as though restructured text is agnostic to new lines, the use of new lines was inconsistent and had no effect on how the files were being displayed.
Reviewers: jhenderson, rupprecht, JDevlieghere
Reviewed By: jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63971
llvm-svn: 365105
This patch addresses https://bugs.llvm.org/show_bug.cgi?id=42183 by replacing
the stub markdown doc for llvm-objcopy with a full one describing the current
options available in llvm-objcopy.
Reviewed by: jakehehrlich, MaskRay
Differential Revision: https://reviews.llvm.org/D63820
llvm-svn: 365042
Previously, the llvm-readelf documentation was essentially just a list
of differences to llvm-readobj. Since llvm-readelf is the more likely
goto tool for many people migrating to the LLVM toolchain, it seems like
it would be helpful to document all the switches in the llvm-readelf
document too. This change expands the options listed accordingly.
Additionally, they are unlikely to care what the differences are to
llvm-readobj, since they won't be familiar with the latter as there is
no GNU equivalent, so this change moves the "differences" section to
llvm-readobj's documentation.
Reviewed by: peter.smith
Differential Revision: https://reviews.llvm.org/D63826
llvm-svn: 364800
Update the doc after llvm-svn: 364121 is landed.
With two more trivial fixes that are not related to
--disassemble-functions but still about llvm-objdump.
Reviewers: jhenderson, grimar, MaskRay, rupprecht, peter.smith
Reviewed by: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D63787
llvm-svn: 364573
The "See Also" section for llvm-nm didn't actually contain any links,
and the tools referred to didn't make much sense (referring to non-LLVM
tools, when we have equivalents, or tools that aren't really to do with
symbol dumping). llvm-objdump's didn't refer to llvm-readelf.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D63875
llvm-svn: 364552
Sphinx allows for definitions of command-line options using
`.. option <name>` and references to those options via `:option:<name>`.
However, it looks like there is no scoping of these options by default,
meaning that links can end up pointing to incorrect documents. See for
example the llvm-mca document, which contains references to -o that,
prior to this patch, pointed to a different document. What's worse is
that these links appear to be non-deterministic in which one is picked
(on my machine, some references end up pointing to opt, whereas on the
live docs, they point to llvm-dwarfdump, for example).
The fix is to add the .. program <name> tag. This essentially namespaces
the options (definitions and references) to the named program, ensuring
that the links are kept correct.
Reviwed by: andreadb
Differential Revision: https://reviews.llvm.org/D63873
llvm-svn: 364538
As detailed in https://bugs.llvm.org/show_bug.cgi?id=42253, there were a
number of issues in the llvm-symbolizer documentation. This patch fixes
them by:
1. Adding [addresses...] to the synopsis, and matching the formatting
of other tools.
2. Rewriting the description to fix grammar issues and mention other
usage options.
3. Rewriting the examples to be easier to read.
4. Re-ordering the options into alphabetical order.
5. Improving the text of some of the option descriptions, and adding
some examples to individual options.
6. Splitting the Mach-O options into a separate section of the
document.
7. Standardizing on double dashes for long options throughout the file.
8. Adding a reference to the llvm-addr2line document.
Reviewed by: mtrent, ikudrin
Differential Revision: https://reviews.llvm.org/D63651
llvm-svn: 364410
There were a number of issues with the llvm-readobj documentation. The
following points were raised in https://bugs.llvm.org/show_bug.cgi?id=42255,
and have been fixed in this patch:
1. The description section claimed "The tool and its output is
primarily designed for use in FileCheck-based tests" which is not
really the case any more.
2. The documentation used single-dash long options for option names,
but references in the help text to other options exclusively used
double-dashes. Fixed by standardising on double-dashes for all
long-form options.
3. The majority of options available and in the help text were not
present in the documentation. This patch adds them.
4. Several aliases, both long and short, were missing, e.g. --relocs.
Additionally, this patch improves the documentation by:
1. Splitting the options into categories based on the file format they
are specific to.
2. Updating the Exit Status section to correctly mention that errors
lead to a non-zero exit code.
3. Adding a See Also section referencing other similar LLVM tools.
4. Improving/correcting some of the descriptions of options that did
not quite match up with what llvm-readobj does.
Reviewed by: peter.smith, MaskRay, mtrent
Differential Revision: https://reviews.llvm.org/D63719
llvm-svn: 364306
There was a stub for llvm-cxxfilt, but it didn't describe the options.
Additionally, it was in markdown, which was causing issues, so as
discussed in https://reviews.llvm.org/D63211, this change replaces the
existing stub with an RST file.
Reviewed by: MaskRay, mattd
Differential Revision: https://reviews.llvm.org/D63722
llvm-svn: 364287
There were several options missing from the documentation. This patch
adds them as well as improving some wording and separating the Mach-O
only options into a separate section.
Fixes https://bugs.llvm.org/show_bug.cgi?id=42234.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D63655
llvm-svn: 364176
The existing symbol code documentation was very incomplete. This patch
adds the missing codes, and defines them based on the current code
behaviour.
Fixes https://bugs.llvm.org/show_bug.cgi?id=42231.
Reviewed by: rupprecht, mtrent, MaskRay
Differential Revision: https://reviews.llvm.org/D63327
llvm-svn: 364171
Many LLVM-based tools already support response files (i.e. files
containing a list of options, specified with '@'). This change simply
updates the documentation and help text for some of these tools to
include it. I haven't attempted to fix all tools, just a selection that
I am interested in.
I've taken the opportunity to add some tests for --help behaviour, where
they were missing. We could expand these tests, but I don't think that's
within scope of this patch.
This fixes https://bugs.llvm.org/show_bug.cgi?id=42233 and
https://bugs.llvm.org/show_bug.cgi?id=42236.
Reviewed by: grimar, MaskRay, jkorous
Differential Revision: https://reviews.llvm.org/D63597
llvm-svn: 364036
The llvm-objdump document was missing many options, and there were also
some style issues with it. This patches fixes all but the first issue
listed in https://bugs.llvm.org/show_bug.cgi?id=42249 by:
1. Adding missing options and commands.
2. Standardising on double dashes for long-options throughout.
3. Moving Mach-O specific options to a separate section.
4. Removing options that don't exist or aren't relevant to
llvm-objdump.
Reviewed by: MaskRay, mtrent, alexshap
Differential Revision: https://reviews.llvm.org/D63606
llvm-svn: 364019
Summary:
Stop referring to "numeric expression", using simply the term
"expression" instead. Likewise for numeric operation since operations
are only used in numeric expressions.
Reviewers: jhenderson, jdenny, probinson, arichardson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63500
llvm-svn: 363901
The docs and help text for --show-parents and --show-children were a bit
inconsistent. The help text claimed they had an effect when "=<offset>"
was used, whereas the doc said it had an effect when "--find" or
"--name" were used. This change changes the doc to mention "=<offset>"
and removes this reference from the help text, to avoid having a very
long description in the help text (it still says "when selectively
printing entries").
Reviewed by: JDevlieghere, aprantl
Differential Revision: https://reviews.llvm.org/D63275
llvm-svn: 363380
Support loading code coverage data from regular archives, thin archives,
and from MachO universal binaries which contain archives.
Testing: check-llvm, check-profile (with {A,UB}San enabled)
rdar://51538999
Differential Revision: https://reviews.llvm.org/D63232
llvm-svn: 363325
This fixes https://bugs.llvm.org/show_bug.cgi?id=42185.
llvm-dwarfdump's documentation was missing a number of options and other
behaviours. This change tries to fix up the documentation by adding
these missing items.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D63217
llvm-svn: 363264
The information for -archs flag is added to llvm-lipo.rst.
Patch by Anusha Basana <anusha.basana@gmail.com>
Differential Revision: https://reviews.llvm.org/D63100
llvm-svn: 363182
The --print-size help text and documentation claimed that the size was
printed instead of the address, but this is incorrect. It is printed as
well as the address. This patch fixes this issue.
Reviewed by: MaskRay, mtrent, ruiu
Differential Revision: https://reviews.llvm.org/D63142
llvm-svn: 363136
Sameer Arora