For some build configurations, `check-all` calls lit multiple times to
run multiple lit test suites. Most recently, I've found this to be
true when configuring openmp as part of `LLVM_ENABLE_RUNTIMES`, but
this is not the first time.
If one test suite fails, none of the remaining test suites run, so you
cannot determine if your patch has broken them. It can then be
frustrating to try to determine which `check-` targets will run the
remaining tests without getting stuck on the failing tests.
When such cases arise, it is probably best to adjust the cmake
configuration for `check-all` to run all test suites as part of one
lit invocation. Because that fix will likely not be implemented and
land immediately, this patch introduces `--ignore-fail` to serve as a
workaround for developers trying to see test results until it does
land:
```
$ LIT_OPTS=--ignore-fail ninja check-all
```
One problem with `--ignore-fail` is that it makes it challenging to
detect test failures in a script, perhaps in CI. This problem should
serve as motivation to actually fix the cmake configuration instead of
continuing to use `--ignore-fail` indefinitely.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D96371
In semi-automated environments, XFAILing or filtering out known regressions without actually committing changes or temporarily modifying the test suite can be quite useful.
Reviewed By: yln
Differential Revision: https://reviews.llvm.org/D96662
With enough cores, the slowest tests can significantly change the total testing time if they happen to run late. With this change, a test suite can improve performance (for high-end systems) by listing just a few of the slowest tests up front.
Reviewed By: jdenny, jhenderson
Differential Revision: https://reviews.llvm.org/D96594
Some test systems do not use lit for test discovery but only for its
substitution and test selection because they use another way of managing
test collections, e.g. CTest. This forces those tests to be invoked with
lit --no-indirectly-run-check. When a mix of lit version is in use, it
requires to detect the availability of that option.
This commit provides a new config option standalone_tests to signal a
directory made of tests meant to run as standalone. When this option is
set, lit skips test discovery and the indirectly run check. It also adds
the missing documentation for --no-indirectly-run-check.
Reviewed By: jdenny
Differential Revision: https://reviews.llvm.org/D94766
1. Emit warnings for files without symbols.
2. Add -no_warning_for_no_symbols.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D95843
The few options are niche. They solved a problem which was traditionally solved
with more shell commands (`llvm-readelf -n` fetches the Build ID. Then
`ln` is used to hard link the file to a directory derived from the Build ID.)
Due to limitation, they are no longer used by Fuchsia and they don't appear to
be used elsewhere (checked with Google Search and Debian Code Search). So delete
them without a transition period.
Announcement: https://lists.llvm.org/pipermail/llvm-dev/2021-February/148446.html
Differential Revision: https://reviews.llvm.org/D96310
This puts it in alphabetical order, matching the rest of the list.
Reviewed by: MaskRay, saugustine
Differential Revision: https://reviews.llvm.org/D94481
This is an enhancement to LLVM Source-Based Code Coverage in clang to track how
many times individual branch-generating conditions are taken (evaluate to TRUE)
and not taken (evaluate to FALSE). Individual conditions may comprise larger
boolean expressions using boolean logical operators. This functionality is
very similar to what is supported by GCOV except that it is very closely
anchored to the ASTs.
Differential Revision: https://reviews.llvm.org/D84467
Introduce CHECK modifiers that change the behavior of the CHECK
directive. Also add a LITERAL modifier for cases where matching could
end requiring escaping strings interpreted as regex where only
literal/fixed string matching is desired (making the CHECK's more
difficult to write/fragile and difficult to interpret).
This stack of changes introduces `llvm-profgen` utility which generates a profile data file from given perf script data files for sample-based PGO. It’s part of(not only) the CSSPGO work. Specifically to support context-sensitive with/without pseudo probe profile, it implements a series of functionalities including perf trace parsing, instruction symbolization, LBR stack/call frame stack unwinding, pseudo probe decoding, etc. Also high throughput is achieved by multiple levels of sample aggregation and compatible format with one stop is generated at the end. Please refer to: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s for the CSSPGO RFC.
This change supports context-sensitive profile data generation into llvm-profgen. With simultaneous sampling for LBR and call stack, we can identify leaf of LBR sample with calling context from stack sample . During the process of deriving fall through path from LBR entries, we unwind LBR by replaying all the calls and returns (including implicit calls/returns due to inlining) backwards on top of the sampled call stack. Then the state of call stack as we unwind through LBR always represents the calling context of current fall through path.
we have two types of virtual unwinding 1) LBR unwinding and 2) linear range unwinding.
Specifically, for each LBR entry which can be classified into call, return, regular branch, LBR unwinding will replay the operation by pushing, popping or switching leaf frame towards the call stack and since the initial call stack is most recently sampled, the replay should be in anti-execution order, i.e. for the regular case, pop the call stack when LBR is call, push frame on call stack when LBR is return. After each LBR processed, it also needs to align with the next LBR by going through instructions from previous LBR's target to current LBR's source, which we named linear unwinding. As instruction from linear range can come from different function by inlining, linear unwinding will do the range splitting and record counters through the range with same inline context.
With each fall through path from LBR unwinding, we aggregate each sample into counters by the calling context and eventually generate full context sensitive profile (without relying on inlining) to driver compiler's PGO/FDO.
A breakdown of noteworthy changes:
- Added `HybridSample` class as the abstraction perf sample including LBR stack and call stack
* Extended `PerfReader` to implement auto-detect whether input perf script output contains CS profile, then do the parsing. Multiple `HybridSample` are extracted
* Speed up by aggregating `HybridSample` into `AggregatedSamples`
* Added VirtualUnwinder that consumes aggregated `HybridSample` and implements unwinding of calls, returns, and linear path that contains implicit call/return from inlining. Ranges and branches counters are aggregated by the calling context. Here calling context is string type, each context is a pair of function name and callsite location info, the whole context is like `main:1 @ foo:2 @ bar`.
* Added PorfileGenerater that accumulates counters by ranges unfolding or branch target mapping, then generates context-sensitive function profile including function body, inferring callee's head sample, callsite target samples, eventually records into ProfileMap.
* Leveraged LLVM build-in(`SampleProfWriter`) writer to support different serialization format with no stop
- `getCanonicalFnName` for callee name and name from ELF section
- Added regression test for both unwinding and profile generation
Test Plan:
ninja & ninja check-llvm
Reviewed By: hoy, wenlei, wmi
Differential Revision: https://reviews.llvm.org/D89723
This does the same as `--mcpu=help` but was only
documented in the user guide.
* Added a test for both options.
* Corrected the single dash in `-mcpu=help` text.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D92305
llvm-symbolizer used to use the DIA SDK for symbolization on
Windows; this patch switches to using native symbolization, which was
implemented recently.
Users can still make the symbolizer use DIA by adding the `-dia` flag
in the LLVM_SYMBOLIZER_OPTS environment variable.
Differential Revision: https://reviews.llvm.org/D91814
This stack of changes introduces `llvm-profgen` utility which generates a profile data file from given perf script data files for sample-based PGO. It’s part of(not only) the CSSPGO work. Specifically to support context-sensitive with/without pseudo probe profile, it implements a series of functionalities including perf trace parsing, instruction symbolization, LBR stack/call frame stack unwinding, pseudo probe decoding, etc. Also high throughput is achieved by multiple levels of sample aggregation and compatible format with one stop is generated at the end. Please refer to: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s for the CSSPGO RFC.
This change enables disassembling the text sections to build various address maps that are potentially used by the virtual unwinder. A switch `--show-disassembly` is being added to print the disassembly code.
Like the llvm-objdump tool, this change leverages existing LLVM components to parse and disassemble ELF binary files. So far X86 is supported.
Test Plan:
ninja check-llvm
Reviewed By: wmi, wenlei
Differential Revision: https://reviews.llvm.org/D89712
This stack of changes introduces `llvm-profgen` utility which generates a profile data file from given perf script data files for sample-based PGO. It’s part of(not only) the CSSPGO work. Specifically to support context-sensitive with/without pseudo probe profile, it implements a series of functionalities including perf trace parsing, instruction symbolization, LBR stack/call frame stack unwinding, pseudo probe decoding, etc. Also high throughput is achieved by multiple levels of sample aggregation and compatible format with one stop is generated at the end. Please refer to: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s for the CSSPGO RFC.
As a starter, this change sets up an entry point by introducing PerfReader to load profiled binaries and perf traces(including perf events and perf samples). For the event, here it parses the mmap2 events from perf script to build the loader snaps, which is used to retrieve the image load address in the subsequent perf tracing parsing.
As described in llvm-profgen.rst, the tool being built aims to support multiple input perf data (preprocessed by perf script) as well as multiple input binary images. It should also support dynamic reload/unload shared objects by leveraging the loader snaps being built by this change
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D89707
Describe in the BackEnd Developer's Guide. Instrument a few backends.
Remove an old unused timing facility. Add a null backend for timing
the parser.
Differential Revision: https://reviews.llvm.org/D91388
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
Add a few cross-references among TableGen documents.
Differential Revision: https://reviews.llvm.org/D90186
Add cross-references between TableGen documents.
--section-details/-t is a GNU readelf option that produce
an output that is an alternative to --sections.
Differential revision: https://reviews.llvm.org/D89304
The prefix given to --prefix will be added to GNU absolute paths when
used with --source option (source interleaved with the disassembly).
This matches GNU's objdump behavior.
GNU and C++17 rules for absolute paths are different.
Differential Revision: https://reviews.llvm.org/D85024
Fixes PR46368.
Differential Revision: https://reviews.llvm.org/D85024
Add printf-style precision specifier to pad numbers to a given number of
digits when matching them if the value is smaller than the given
precision. This works on both empty numeric expression (e.g. variable
definition from input) and when matching a numeric expression. The
syntax is as follows:
[[#%.<precision><format specifier>, ...]
where <format specifier> is optional and ... can be a variable
definition or not with an empty expression or not. In the absence of a
precision specifier, a variable definition will accept leading zeros.
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D81667
When diffing disassembly dump of two binaries, I see lots of noises from mismatched jump target addresses and global data references, which unnecessarily causes diffs on every function, making it impractical. I'm trying to symbolize the raw binary addresses to minimize the diff noise.
In this change, a local branch target is modeled as a label and the branch target operand will simply be printed as a label. Local labels are collected by a separate pre-decoding pass beforehand. A global data memory operand will be printed as a global symbol instead of the raw data address. Unfortunately, due to the way the disassembler is set up and to be less intrusive, a global symbol is always printed as the last operand of a memory access instruction. This is less than ideal but is probably acceptable from checking code quality point of view since on most targets an instruction can have at most one memory operand.
So far only the X86 disassemblers are supported.
Test Plan:
llvm-objdump -d --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
mov eax, dword ptr [rsp]
cmp eax, dword ptr [rip + 4112] # 202182 <g>
jge 0x20117e <_start+0x25>
call 0x201158 <foo>
inc dword ptr [rsp]
jmp 0x201169 <_start+0x10>
xor eax, eax
pop rcx
ret
```
llvm-objdump -d **--symbolize-operands** --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
<L1>:
mov eax, dword ptr [rsp]
cmp eax, dword ptr <g>
jge <L0>
call <foo>
inc dword ptr [rsp]
jmp <L1>
<L0>:
xor eax, eax
pop rcx
ret
```
Note that the jump instructions like `jge 0x20117e <_start+0x25>` without this work is printed as a real target address and an offset from the leading symbol. With a change in the optimizer that adds/deletes an instruction, the address and offset may shift for targets placed after the instruction. This will be a problem when diffing the disassembly from two optimizers where there are unnecessary false positives due to such branch target address changes. With `--symbolize-operand`, a label is printed for a branch target instead to reduce the false positives. Similarly, the disassemble of PC-relative global variable references is also prone to instruction insertion/deletion.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D84191
Add support for passing in libraries via `-l` and `-L` options to
`llvm-libtool-darwin`.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D85540
Add support for -arch_only option for llvm-libtool-darwin. This diff
also adds support for accepting universal files as input and flattening
them to create the required static library. Supports input universal
files contaning both Mach-O object files or archives.
Differences from cctools' libtool:
- `-arch_only` can be specified multiple times
- archives containing universal files are considered invalid (libtool
allows such archives)
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84770
Add documentation for the remaining options of
`llvm-install-name-tool`.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D85655
The switch from llvm::cl to OptTable (D83530) dropped --version, which
is needed by some users.
This patch also adds a -v alias, which is available in GNU addr2line.
The version dumping is similar to llvm-objcopy --version (exotic):
```
llvm-symbolizer
LLVM (http://llvm.org/):
LLVM version 12.0.0git
Optimized build with assertions.
Default target: x86_64-unknown-linux-gnu
Host CPU: skylake-avx512
```
Reviewed By: dyung, jhenderson
Differential Revision: https://reviews.llvm.org/D85624
Add support for `-D` and `-U` options for llvm-libtool-darwin. `-D`
allows for using zero for timestamps and UIDs/GIDs. `-U` allows for
using actual timestamps and UIDs/GIDs.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84209
Add support for `-filelist` option for llvm-libtool-darwin. `-filelist`
option allows for passing in a file containing a list of filenames.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84206
This diff adds documentation for `allow-empty` flag under FileCheck
docs.
Reviewed by jhenderson, smeenai, thopre
Differential Revision: https://reviews.llvm.org/D83682
This came up during the review for D67656. It's nice but also subtle, so documenting it as an idiom will make tests easier to understand.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D68061
for the advantage outlined by D83639 ([OptTable] Support grouped short options)
Some behavior changes:
* -i={0,false} is removed. Use --no-inlines instead.
* --demangle={0,false} is removed. Use --no-demangle instead
* -untag-addresses={0,false} is removed. Use --no-untag-addresses instead
Added a higher level API OptTable::parseArgs which handles optional
initial options populated from an environment variable, expands response
files recursively, and parses options.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83530
PGO profile is usually more precise than sample profile. However, PGO profile
needs to be collected from loadtest and loadtest may not be representative
enough to the production workload. Sample profile collected from production
can be used as a supplement -- for functions cold in loadtest but warm/hot
in production, we can scale up the related function in PGO profile if the
function is warm or hot in sample profile.
The implementation contains changes in compiler side and llvm-profdata side.
Given an instr profile and a sample profile, for a function cold in PGO
profile but warm/hot in sample profile, llvm-profdata will either mark
all the counters in the profile to be -1 or scale up the max count in the
function to be above hot threshold, depending on the zero counter ratio in
the profile. The assumption is if there are too many counters being zero
in the function profile, the profile is more likely to cause harm than good,
then llvm-profdata will mark all the counters to be -1 indicating the
function is hot but the profile is unaccountable. In compiler side, if a
function profile with all -1 counters is seen, the function entry count will
be set to be above hot threshold but its internal profile will be dropped.
In the long run, it may be useful to let compiler support using PGO profile
and sample profile at the same time, but that requires more careful design
and more substantial changes to make two profiles work seamlessly. The patch
here serves as a simple intermediate solution.
Differential Revision: https://reviews.llvm.org/D81981
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
New change: check for existence of field `cycles` in perf_branch_entry before enabling this mode.
This should prevent compilation errors when building for older kernel whose headers don't support it.
Add support for creating static libraries when the input includes only
Mach-O binaries (and not libraries/archives themselves).
Reviewed by alexshap, Ktwu, smeenai, jhenderson, MaskRay, mtrent
Differential Revision: https://reviews.llvm.org/D83002
Its effect could be achieved by
`-stop-after`,`-print-after`,`-print-after-all`. But a few tests need to
print MIR after ISel which could not be done with
`-print-after`/`-stop-after` since isel pass does not have commandline name.
That's the reason `--print-machineinstrs` is downgraded to
`--print-after-isel` in this patch. `--print-after-isel` could be
removed after we switch to new pass manager since isel pass would have a
commandline text name to use `print-after` or equivalent switches.
The motivation of this patch is to reduce tests dependency on
would-be-deprecated feature.
Reviewed By: arsenm, dsanders
Differential Revision: https://reviews.llvm.org/D83275
This patch changes llvm-readelf (and llvm-readobj for consistency)
behavior to print an error when executed with no input files.
Reading from stdin can be achieved via a '-' for the input
object.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46400
Differential Revision: https://reviews.llvm.org/D83704
Reviewed by: jhenderson, MaskRay, sbc, jyknight
This diff starts the implementation of llvm-libtool-darwin
(an llvm based replacement of cctool's libtool).
Libtool is used for creating static and dynamic libraries
from a bunch of object files given as input.
Reviewed by alexshap, smeenai, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D82923
From @erichkeane:
```
This patch doesn't seem to build for me:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp: In function ‘llvm::Error llvm::exegesis::parseDataBuffer(const char*, size_t, const void*, const void*, llvm::SmallVector<long int, 4>*)’:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp:99:37: error: ‘struct perf_branch_entry’ has no member named ‘cycles’
CycleArray->push_back(Entry.cycles);
I'm on RHEL7, so I have kernel 3.10, so it doesn't have 'cycles'.
According ot this: https://elixir.bootlin.com/linux/v4.3/source/include/uapi/linux/perf_event.h#L963 kernel 4.3 is the first time that 'cycles' appeared in this structure.
```
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
In FileCheck.rst, add `-dump-input-context` and `-dump-input-filter`,
and fix some `-dump-input` documentation.
In `FileCheck -help`, `cl::value_desc("kind")` is being ignored for
`-dump-input-filter`, so just drop it.
Extend `-dump-input=help` to mention FILECHECK_OPTS.
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Differential revision: https://reviews.llvm.org/D70720
Before the fix the build of docs-llvm-html would fail.
The D80959 introduced options that are not recognized, so we have
warning as:
llvm-project/llvm/docs/CommandGuide/llvm-dwarfdump.rst:40\
:unknown option: --debug-info
Differential Revision: https://reviews.llvm.org/D82460
Summary: Rename --elf-cg-profile to --cg-profile and keep --elf-cg-profile as an alias of --cg-profile.
Reviewers: jhenderson, MaskRay, espindola, hans
Reviewed By: jhenderson, MaskRay
Subscribers: emaste, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81855
Summary:
This completes the needed glueing to support reading tbd files from nm.
This includes specifying which slice filtering with `--arch` and a new
option specifically for tbd files `--add-inlinedinfo` which will show
the reexported libraries that are appended in the tbd file.
Reviewers: ributzka, steven_wu, JDevlieghere, jhenderson
Reviewed By: JDevlieghere
Subscribers: hiraditya, MaskRay, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81614
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support for specifying the
matching constraint for a numeric expression, ie. how the value being
matched should relate to the numeric expression.
This commit only adds the equality constraint where the numeric value
matched must be equal to the numeric expression. It is the default
matching constraint used when not specified. It is added to provision
other matching constraint (e.g. inequality relations).
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D60391
This patch extends numerical expressions to allow calls to
predefined functions. These calls can be combined with the
existing numerical operators, which includes nesting calls.
The call syntax is:
<func>(<args>)
Where <func> is a predefined string literal, currently limited to
one of add, max, min and sub. <arg> is a comma seperated list of
numerical expressions.
Subscribers: arichardson, hiraditya, thopre, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79936
Having the input dumped on failure seems like a better
default: I debugged FileCheck tests for a while without knowing
about this option, which really helps to understand failures.
Remove `-dump-input-on-failure` and the environment variable
FILECHECK_DUMP_INPUT_ON_FAILURE which are now obsolete.
Differential Revision: https://reviews.llvm.org/D81422
Some of the --debug-* options can take an optional offset. Although the
man page does a good job of making that clear, it's much harder to
discover from the help output.
Currently the only reference to this is the following sentence:
> Where applicable these parameters take an optional =<offset> argument
> to dump only the entry at the specified offset.
This patch changes the help output from to print [=<offset>] after the
options that take an offset.
--debug-info[=<offset>] - Dump the .debug_info section
rdar://problem/63150066
Differential revision: https://reviews.llvm.org/D80959
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support signed numeric
values, thus allowing negative numeric values.
As such, the patch adds a new class to represent a signed or unsigned
value and add the logic for type promotion and type conversion in
numeric expression mixing signed and unsigned values. It also adds
the %d format specifier to represent signed value.
Finally, it also adds underflow and overflow detection when performing a
binary operation.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson
Reviewed By: jhenderson, arichardson
Subscribers: MaskRay, hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60390
With this change it is be possible to write FileCheck expressions such
as [[#(VAR+1)-2]]. Currently, the only supported arithmetic operators are
plus and minus, so this is not particularly useful yet. However, it our
CHERI fork we have tests that benefit from having multiplication in
FileCheck expressions. Allowing parenthesized expressions is the simplest
way for us to work around the current lack of operator precedence in
FileCheck expressions.
Reviewed By: thopre, jhenderson
Differential Revision: https://reviews.llvm.org/D77383
cctools strip has the option "-T" which removes Swift symbols.
This diff implements this option in llvm-strip for MachO.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D80099
llvm-extract get serveral new options, but we forgot to update doc.
This patch update the doc.
Reviewed By: volkan
Differential Revision: https://reviews.llvm.org/D80413
Add support for generating a dsymutil reproducer. The result is a folder
containing all the object files for linking.
When --gen-reproducer is passed, dsymutil uses a FileCollectorFileSystem
which keeps track of all the files used by dsymutil. These files are
copied into a temporary directory when dsymutil exists.
When this path is passed to --use-reproducer, dsymutil uses a
RedirectingFileSystem that will use the files from the reproducer
directory instead of the actual paths. This means you don't need to mess
with the OSO path prefix.
Differential revision: https://reviews.llvm.org/D79398
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
This patch adds statistics about the contribution of each object file to
the linked debug info. When --statistics is passed to dsymutil, it
prints a table after linking as illustrated below.
It lists the object file name, the size of the debug info in the object
file in bytes, and the absolute size contribution to the linked dSYM and
the percentage difference. The table is sorted by the output size, so
the object files contributing the most to the link are listed first.
.debug_info section size (in bytes)
-------------------------------------------------------------------------------
Filename Object dSYM Change
-------------------------------------------------------------------------------
basic2.macho.x86_64.o 210b 165b -24.00%
basic3.macho.x86_64.o 177b 150b -16.51%
basic1.macho.x86_64.o 125b 129b 3.15%
-------------------------------------------------------------------------------
Total 512b 444b -14.23%
-------------------------------------------------------------------------------
Differential revision: https://reviews.llvm.org/D79513
The --output-target documentation has slightly rotted, as the default is
no longer purely based on the input file format, but also the value of
--input-target. This patch updates the documentation to make this
explicit.
Reviewed by: MaskRay, alexshap
Differential Revision: https://reviews.llvm.org/D79318
This addresses:
-Clean up the source code
-Refactor the JSON fields
-Fix the test cases
-Improve the docs for the stats output
Differential Revision: https://reviews.llvm.org/D77789
Summary:
FileCheck documentation contains an example of a numeric variable
defined and used on the same line. This is not currently supported by
FileCheck so this commit fixes the example to use CHECK-SAME for the
variable use.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D79253
This option was added several months ago in commit e84468c1.
Reviewed by: MaskRay, erik.pilkington, steven_wu
Differential Revision: https://reviews.llvm.org/D79166
This change helps improve `dsymutil` documentation.
- Add missing options
- Re-arrange options in alphabetical order
- Wrap inline options in double-back-quote
- `-v` is for `--version` not `--verbose`
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D78479
Summary:
This matches the behavior of GNU addr2line. We previously treated
hexadecimal addresses as binary if they started with 0b, otherwise as
octal if they started with 0, otherwise as decimal.
This only affects llvm-addr2line; the behavior of llvm-symbolize is
unaffected.
Reviewers: ikudrin, rupprecht, jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73306
LanguageExtensions.rst:2191: WARNING: Title underline too short.
llvm-symbolizer.rst:157: Error in "code-block" directive: maximum 1 argument(s) allowed, 30 supplied.
This patch adds missing description of enable-no-signed-zeros-fp-math
and enable-no-trapping-fp-math options of llc.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D77713
The LitConfig is shared across the whole test suite. However, since
enabling recursive expansion can be a breaking change for some test
suites, it's important to confine the setting to test suites that
enable it explicitly.
Note that other issues were raised with the way recursiveExpansionLimit
operates. However, this commit simply moves the setting to the right
place -- the mechanism by which it works can be improved independently.
Differential Revision: https://reviews.llvm.org/D77415
SUMMARY:
For the llvm-objdump -D, the symbol name is used as a label in the disassembly for the specific address (when a symbol address is equal to the virtual address in the dump).
In XCOFF, multiple symbols may have the same name, being differentiated by their storage mapping class. It is helpful to print the QualName and not just the name when forming the output label for a csect symbol. The symbol index further removes any ambiguity caused by duplicate names.
To maintain compatibility with the binutils objdump, the XCOFF-specific --symbol-description option is added to enable the enhanced format.
Reviewers: hubert.reinterpretcast, James Henderson, Jason Liu ,daltenty
Subscribers: wuzish, nemanjai, hiraditya
Differential Revision: https://reviews.llvm.org/D72973
Summary:
This patch is to teach `llvm-objdump` dump dynamic symbols (`-T` and `--dynamic-syms`). Currently, this patch is not fully compatible with `gnu-objdump`, but I would like to continue working on this in next few patches. It has two issues.
1. Some symbols shouldn't be marked as global(g). (`-t/--syms` has same issue as well) (Fixed by D75659)
2. `gnu-objdump` can dump version information and *dynamically* insert before symbol name field.
`objdump -T a.out` gives:
```
DYNAMIC SYMBOL TABLE:
0000000000000000 w D *UND* 0000000000000000 _ITM_deregisterTMCloneTable
0000000000000000 DF *UND* 0000000000000000 GLIBC_2.2.5 printf
0000000000000000 DF *UND* 0000000000000000 GLIBC_2.2.5 __libc_start_main
0000000000000000 w D *UND* 0000000000000000 __gmon_start__
0000000000000000 w D *UND* 0000000000000000 _ITM_registerTMCloneTable
0000000000000000 w DF *UND* 0000000000000000 GLIBC_2.2.5 __cxa_finalize
```
`llvm-objdump -T a.out` gives:
```
DYNAMIC SYMBOL TABLE:
0000000000000000 w D *UND* 0000000000000000 _ITM_deregisterTMCloneTable
0000000000000000 g DF *UND* 0000000000000000 printf
0000000000000000 g DF *UND* 0000000000000000 __libc_start_main
0000000000000000 w D *UND* 0000000000000000 __gmon_start__
0000000000000000 w D *UND* 0000000000000000 _ITM_registerTMCloneTable
0000000000000000 w DF *UND* 0000000000000000 __cxa_finalize
```
Reviewers: jhenderson, grimar, MaskRay, espindola
Reviewed By: jhenderson, grimar
Subscribers: emaste, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75756
Add an option to llvm-dwarfdump to calculate the bytes within
the debug sections. Dump this numbers when using --statistics
option as well.
This is an initial patch (e.g. we should support other units,
since we only support 'bytes' now).
Differential Revision: https://reviews.llvm.org/D74205
Summary:
As noted in documentation, different repetition modes have different trade-offs:
> .. option:: -repetition-mode=[duplicate|loop]
>
> Specify the repetition mode. `duplicate` will create a large, straight line
> basic block with `num-repetitions` copies of the snippet. `loop` will wrap
> the snippet in a loop which will be run `num-repetitions` times. The `loop`
> mode tends to better hide the effects of the CPU frontend on architectures
> that cache decoded instructions, but consumes a register for counting
> iterations.
Indeed. Example:
>>! In D74156#1873657, @lebedev.ri wrote:
> At least for `CMOV`, i'm seeing wildly different results
> | | Latency | RThroughput |
> | duplicate | 1 | 0.8 |
> | loop | 2 | 0.6 |
> where latency=1 seems correct, and i'd expect the througput to be close to 1/2 (since there are two execution units).
This isn't great for analysis, at least for schedule model development.
As discussed in excruciating detail in
>>! In D74156#1924514, @gchatelet wrote:
>>>! In D74156#1920632, @lebedev.ri wrote:
>> ... did that explanation of the question i'm having made any sense?
>
> Thx for digging in the conversation !
> Ok it makes more sense now.
>
> I discussed it a bit with @courbet:
> - We want the analysis tool to stay simple so we'd rather not make it knowledgeable of the repetition mode.
> - We'd like to still be able to select either repetition mode to dig into special cases
>
> So we could add a third `min` repetition mode that would run both and take the minimum. It could be the default option.
> Would you have some time to look what it would take to add this third mode?
there appears to be an agreement that it is indeed sub-par,
and that we should provide an optional, measurement (not analysis!) -time
way to rectify the situation.
However, the solutions isn't entirely straight-forward.
We can just add an actual 'multiplexer' `MinSnippetRepetitor`, because
if we just concatenate snippets produced by `DuplicateSnippetRepetitor`
and `LoopSnippetRepetitor` and run+measure that, the measurement will
naturally be different from what we'd get by running+measuring
them separately and taking the min.
([[ https://www.wolframalpha.com/input/?i=%28x%2By%29%2F2+%21%3D+min%28x%2C+y%29 | `time(D+L)/2 != min(time(D), time(L))` ]])
Also, it seems best to me to have a single snippet instead of generating
a snippet per repetition mode, since the only difference here is that the
loop repetition mode reserves one register for loop counter.
As far as i can tell, we can either teach `BenchmarkRunner::runConfiguration()`
to produce a single report given multiple repetitors (as in the patch),
or do that one layer higher - don't modify `BenchmarkRunner::runConfiguration()`,
produce multiple reports, don't actually print each one, but aggregate them somehow
and only print the final one.
Initially i've gone ahead with the latter approach, but it didn't look like a natural fit;
the former (as in the diff) does seem like a better fit to me.
There's also a question of the test coverage. It sure currently does work here:
```
$ ./bin/llvm-exegesis --opcode-name=CMOV64rr --mode=inverse_throughput --repetition-mode=duplicate
Check generated assembly with: /usr/bin/objdump -d /tmp/snippet-8fb949.o
---
mode: inverse_throughput
key:
instructions:
- 'CMOV64rr RAX RAX R11 i_0x0'
- 'CMOV64rr RBP RBP R15 i_0x0'
- 'CMOV64rr RBX RBX RBX i_0x0'
- 'CMOV64rr RCX RCX RBX i_0x0'
- 'CMOV64rr RDI RDI R10 i_0x0'
- 'CMOV64rr RDX RDX RAX i_0x0'
- 'CMOV64rr RSI RSI RAX i_0x0'
- 'CMOV64rr R8 R8 R8 i_0x0'
- 'CMOV64rr R9 R9 RDX i_0x0'
- 'CMOV64rr R10 R10 RBX i_0x0'
- 'CMOV64rr R11 R11 R14 i_0x0'
- 'CMOV64rr R12 R12 R9 i_0x0'
- 'CMOV64rr R13 R13 R12 i_0x0'
- 'CMOV64rr R14 R14 R15 i_0x0'
- 'CMOV64rr R15 R15 R13 i_0x0'
config: ''
register_initial_values:
- 'RAX=0x0'
- 'R11=0x0'
- 'EFLAGS=0x0'
- 'RBP=0x0'
- 'R15=0x0'
- 'RBX=0x0'
- 'RCX=0x0'
- 'RDI=0x0'
- 'R10=0x0'
- 'RDX=0x0'
- 'RSI=0x0'
- 'R8=0x0'
- 'R9=0x0'
- 'R14=0x0'
- 'R12=0x0'
- 'R13=0x0'
cpu_name: bdver2
llvm_triple: x86_64-unknown-linux-gnu
num_repetitions: 10000
measurements:
- { key: inverse_throughput, value: 0.819, per_snippet_value: 12.285 }
error: ''
info: instruction has tied variables, using static renaming.
assembled_snippet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
...
$ ./bin/llvm-exegesis --opcode-name=CMOV64rr --mode=inverse_throughput --repetition-mode=loop
Check generated assembly with: /usr/bin/objdump -d /tmp/snippet-051eb3.o
---
mode: inverse_throughput
key:
instructions:
- 'CMOV64rr RAX RAX R11 i_0x0'
- 'CMOV64rr RBP RBP RSI i_0x0'
- 'CMOV64rr RBX RBX R9 i_0x0'
- 'CMOV64rr RCX RCX RSI i_0x0'
- 'CMOV64rr RDI RDI RBP i_0x0'
- 'CMOV64rr RDX RDX R9 i_0x0'
- 'CMOV64rr RSI RSI RDI i_0x0'
- 'CMOV64rr R9 R9 R12 i_0x0'
- 'CMOV64rr R10 R10 R11 i_0x0'
- 'CMOV64rr R11 R11 R9 i_0x0'
- 'CMOV64rr R12 R12 RBP i_0x0'
- 'CMOV64rr R13 R13 RSI i_0x0'
- 'CMOV64rr R14 R14 R14 i_0x0'
- 'CMOV64rr R15 R15 R10 i_0x0'
config: ''
register_initial_values:
- 'RAX=0x0'
- 'R11=0x0'
- 'EFLAGS=0x0'
- 'RBP=0x0'
- 'RSI=0x0'
- 'RBX=0x0'
- 'R9=0x0'
- 'RCX=0x0'
- 'RDI=0x0'
- 'RDX=0x0'
- 'R12=0x0'
- 'R10=0x0'
- 'R13=0x0'
- 'R14=0x0'
- 'R15=0x0'
cpu_name: bdver2
llvm_triple: x86_64-unknown-linux-gnu
num_repetitions: 10000
measurements:
- { key: inverse_throughput, value: 0.6083, per_snippet_value: 8.5162 }
error: ''
info: instruction has tied variables, using static renaming.
assembled_snippet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
...
$ ./bin/llvm-exegesis --opcode-name=CMOV64rr --mode=inverse_throughput --repetition-mode=min
Check generated assembly with: /usr/bin/objdump -d /tmp/snippet-c7a47d.o
Check generated assembly with: /usr/bin/objdump -d /tmp/snippet-2581f1.o
---
mode: inverse_throughput
key:
instructions:
- 'CMOV64rr RAX RAX R11 i_0x0'
- 'CMOV64rr RBP RBP R10 i_0x0'
- 'CMOV64rr RBX RBX R10 i_0x0'
- 'CMOV64rr RCX RCX RDX i_0x0'
- 'CMOV64rr RDI RDI RAX i_0x0'
- 'CMOV64rr RDX RDX R9 i_0x0'
- 'CMOV64rr RSI RSI RAX i_0x0'
- 'CMOV64rr R9 R9 RBX i_0x0'
- 'CMOV64rr R10 R10 R12 i_0x0'
- 'CMOV64rr R11 R11 RDI i_0x0'
- 'CMOV64rr R12 R12 RDI i_0x0'
- 'CMOV64rr R13 R13 RDI i_0x0'
- 'CMOV64rr R14 R14 R9 i_0x0'
- 'CMOV64rr R15 R15 RBP i_0x0'
config: ''
register_initial_values:
- 'RAX=0x0'
- 'R11=0x0'
- 'EFLAGS=0x0'
- 'RBP=0x0'
- 'R10=0x0'
- 'RBX=0x0'
- 'RCX=0x0'
- 'RDX=0x0'
- 'RDI=0x0'
- 'R9=0x0'
- 'RSI=0x0'
- 'R12=0x0'
- 'R13=0x0'
- 'R14=0x0'
- 'R15=0x0'
cpu_name: bdver2
llvm_triple: x86_64-unknown-linux-gnu
num_repetitions: 10000
measurements:
- { key: inverse_throughput, value: 0.6073, per_snippet_value: 8.5022 }
error: ''
info: instruction has tied variables, using static renaming.
assembled_snippet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
...
```
but i open to suggestions as to how test that.
I also have gone with the suggestion to default to this new mode.
This was irking me for some time, so i'm happy to finally see progress here.
Looking forward to feedback.
Reviewers: courbet, gchatelet
Reviewed By: courbet, gchatelet
Subscribers: mstojanovic, RKSimon, llvm-commits, courbet, gchatelet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76921
This allows defining substitutions in terms of other substitutions. For
example, a %build substitution could be defined in terms of a %cxx
substitution as '%cxx %s -o %t.exe' and the script would be properly
expanded.
Differential Revision: https://reviews.llvm.org/D76178
to remap object file paths (but no source paths) before
processing. This is meant to be used for Clang objects where the
module cache location was remapped using ``-fdebug-prefix-map``; to
help dsymutil find the Clang module cache.
<rdar://problem/55685132>
Differential Revision: https://reviews.llvm.org/D76391
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Currently, this only works for object files, not executables or shared
libraries.
Differential revision: https://reviews.llvm.org/D70720
The examples for different options were inconsistently indented in
the HTML display. As they are tied to the options, this change
normalises to indent them the same as the option description body.
"--functions none" and "--functions=none" are not the same. One is the
option "--functions" with its default value of "linkage", followed by an
input address of "none", and the other is "--functions" with the value
"none". This patch fixes the doc to match the actual behaviour by adding
an extra '=' sign in the allowed values description.
Summary:
gnu addr2line prints DWARF line table discriminators like so:
<file>:<line> (discriminator <Number>)
This matches that behavior.
Document how and when --output-style=GNU prints discriminators
Add test for new GNU-style discriminator printing.
Reviewers: rupprecht, labath, jhenderson
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73318
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support for selecting a
matching format to match a numeric value against (ie. decimal, hex lower
case letters or hex upper case letters).
This commit allows to select what format a numeric value should be
matched against. The following formats are supported: decimal value,
lower case hex value and upper case hex value. Matching formats impact
both the format of numeric value to be matched as well as the format of
accepted numbers in a definition with empty numeric expression
constraint.
Default for absence of format is decimal value unless the numeric
expression constraint is non null and use a variable in which case the
format is the one used to define that variable. Conclict of format in
case of several variable being used is diagnosed and forces the user to
select a matching format explicitely.
This commit also enables immediates in numeric expressions to be in any
radix known to StringRef's GetAsInteger method, except for legacy
numeric expressions (ie [[@LINE+<offset>]] which only support decimal
immediates.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson
Reviewed By: jhenderson, arichardson
Subscribers: daltenty, MaskRay, hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60389
The sub-heading used to contain the --only-keep-debug switch as that
switch wasn't implemented for ELF at one point. Since the switch is now
in the generic options section, and there are no other options in this
sub-heading, it is pointless and can be deleted.
When using the option, draw the histogram representing the debug
location buckets. The resulting histogram will be saved in a png
file.
Differential Revision: https://reviews.llvm.org/D71869
Making these changes, the code becomes more robust and easier for
adding the new features.
-Introduce the LocationStats class representing the statistics
-Add the pretty_print() method in the LocationStats class
-Add additional '-' for the program options
-Add the verify_program_inputs() function
-Add the parse_locstats() function
-Rename 'results' => 'opts'
-Add more comments
Differential Revision: https://reviews.llvm.org/D71868
llvm-symbolizer is used by sanitizers to symbolize errors discovered by
sanitizer, but there's no way to pass options to llvm-symbolizer since
the tool is invoked directly by the sanitizer runtime. Therefore, we
don't have a way to pass options needed to find debug symbols such as
-dsym-hint or -debug-file-directory. This change enables reading options
from the LLVM_SYMBOLIZER_OPTS in addition to command line which can be
used to pass those additional options to llvm-symbolizer invocations
made by sanitizer runtime.
Differential Revision: https://reviews.llvm.org/D71668
Remappings involving extern "C" names were already supported in the
context of <local-name>s, but this support didn't work for remapping the
complete mangling itself. (Eg, we would remap X<foo> but not foo itself,
if foo is an extern "C" function.)
Summary:
This is a follow up for D70548.
Currently, variables with debug info coverage between 0% and 1% are put into
zero-bucket. D70548 changed the way statistics calculate a variable's coverage:
we began to use enclosing scope rather than a possible variable life range.
Thus more variables might be moved to zero-bucket despite they have some debug
info coverage.
The patch is to distinguish between a variable that has location info but
it's significantly less than its enclosing scope and a variable that doesn't
have it at all.
Reviewers: djtodoro, aprantl, dblaikie, avl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71070
Summary:
This changes the representation of 'coverage buckets' in llvm-dwarfdump and
llvm-locstats to one that makes more clear what the buckets contain.
See some related details in D71070.
Reviewers: djtodoro, aprantl, cmtice, jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71366
The parsing error tests in ELF/redefine-symbols.test are not specific to ELF.
Move them to redefine-symbols.test.
Add COFF/redefine-symbols.test for COFF specific tests.
Also fix the documentation regarding --redefine-syms: the old and new
names are separated by whitespace, not an equals sign.
Reviewed By: mstorsjo
Differential Revision: https://reviews.llvm.org/D70036
--only-keep-debug produces a debug file as the output that only
preserves contents of sections useful for debugging purposes (the
binutils implementation preserves SHT_NOTE and non-SHF_ALLOC sections),
by changing their section types to SHT_NOBITS and rewritting file
offsets.
See https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html
The intended use case is:
```
llvm-objcopy --only-keep-debug a a.dbg
llvm-objcopy --strip-debug a b
llvm-objcopy --add-gnu-debuglink=a.dbg b
```
The current layout algorithm is incapable of deleting contents and
shrinking segments, so it is not suitable for implementing the
functionality.
This patch adds a new algorithm which assigns sh_offset to sections
first, then modifies p_offset/p_filesz of program headers. It bears a
resemblance to lld/ELF/Writer.cpp.
Reviewed By: jhenderson, jakehehrlich
Differential Revision: https://reviews.llvm.org/D67137
This works around a bug in Debian's patchset for glibc. The bug is
described in detail in the upstream debian bug:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=943798, but the short
version of it is that glibc on any Debian based distro don't load
libraries unless it has a .ARM.attribute section.
Reviewed by: jhenderson, rupprecht, MaskRay, jakehehrlich
Differential Revision: https://reviews.llvm.org/D69188
Patch by Tobias Hieta.
Joel E. Denny