Summary:
This adds a new -no-weak flag to nm to hide weak symbols in its output.
This also adds a -W alias for this which is analogous to -U.
Patch by Keith Smiley
Reviewers: kastiglione, enderby, compnerd
Reviewed By: kastiglione
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48751
llvm-svn: 336126
Prior to this change, there was no clean way of getting FileCheck to
check that a line is completely empty. The expected way of using
"CHECK: {{^$}}" does not work because the '^' matches the end of the
previous match (this behaviour may be desirable in certain instances).
For the same reason, "CHECK-NEXT: {{^$}}" will fail when the previous
match was at the end of the line, as the pattern will match there.
Using the recommended [[:space:]] to match an explicit new line could
also match a space, and thus is not always desired. Literal '\n'
matches also do not work. A workaround was suggested in the review, but
it is a little clunky.
This change adds a new directive that behaves the same as CHECK-NEXT,
except that it only matches against empty lines (nothing, not even
whitespace, is allowed). As with CHECK-NEXT, it will fail if more than
one newline occurs before the next blank line. Example usage:
; test.txt
foo
bar
; CHECK: foo
; CHECK-EMPTY:
; CHECK-NEXT: bar
Differential Revision: https://reviews.llvm.org/D28896
Reviewed by: probinson
llvm-svn: 335613
(Relands r333584, reverted in 333592.)
When debugging test failures with -vv (or -v in the case of the
internal shell), this makes it easier to locate the RUN line that
failed. For example, clang's test/Driver/linux-ld.c has 892 total RUN
lines, and clang's test/Driver/arm-cortex-cpus.c has 424 RUN lines
after concatenation for line continuations.
When reading the generated shell script, this also makes it easier to
locate the RUN line that produced each command.
To support reporting RUN line numbers in the case of the internal
shell, this patch extends the internal shell to support the null
command, ":", except pipelines are not supported.
To support reporting RUN line numbers in the case of windows cmd.exe
as the external shell, this patch extends -vv to set "echo on" instead
of "echo off" in bat files. (Support for windows cmd.exe as a lit
external shell will likely be dropped later, but I found out too
late.)
Reviewed By: delcypher, asmith, stella.stamenova, jmorse, lebedev.ri, rnk
Differential Revision: https://reviews.llvm.org/D44598
llvm-svn: 333614
(Relands r330755 (reverted in r330848) with fix for PR37239.)
When debugging test failures with -vv (or -v in the case of the
internal shell), this makes it easier to locate the RUN line that
failed. For example, clang's test/Driver/linux-ld.c has 892 total RUN
lines, and clang's test/Driver/arm-cortex-cpus.c has 424 RUN lines
after concatenation for line continuations.
When reading the generated shell script, this also makes it easier to
locate the RUN line that produced each command.
To support reporting RUN line numbers in the case of the internal
shell, this patch extends the internal shell to support the null
command, ":", except pipelines are not supported.
To support reporting RUN line numbers in the case of windows cmd.exe
as the external shell, this patch extends -vv to set "echo on" instead
of "echo off" in bat files. (Support for windows cmd.exe as a lit
external shell will likely be dropped later, but I found out too
late.)
Reviewed By: delcypher, asmith, stella.stamenova, jmorse, lebedev.ri, rnk
Differential Revision: https://reviews.llvm.org/D44598
llvm-svn: 333584
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
When debugging test failures with -vv (or -v in the case of the
internal shell), this makes it easier to locate the RUN line that
failed. For example, clang's test/Driver/linux-ld.c has 892 total RUN
lines, and clang's test/Driver/arm-cortex-cpus.c has 424 RUN lines
after concatenation for line continuations.
When reading the generated shell script, this also makes it easier to
locate the RUN line that produced each command.
To support reporting RUN line numbers in the case of the internal
shell, this patch extends the internal shell to support the null
command, ":", except pipelines are not supported.
Reviewed By: asmith, delcypher
Differential Revision: https://reviews.llvm.org/D44598
llvm-svn: 330755
This is copied from Andrea's text in PR36875:
https://bugs.llvm.org/show_bug.cgi?id=36875
As noted there, this is a hack...but it's a good one!
It's important to show potential workflows up-front
with examples, so customers can copy and experiment
with them.
llvm-svn: 329726
This patch moves the logic that collects and analyzes dispatch events to the
DispatchStatistics view.
Added flag -dispatch-stats to print statistics related to the dispatch logic.
llvm-svn: 329708
This patch teaches llvm-mca how to parse code comments in search for special
"markers" used to select regions of code.
Example:
# LLVM-MCA-BEGIN My Code Region
....
# LLVM-MCA-END
The MCAsmLexer now delegates to an object of class MCACommentParser (i.e. an
AsmCommentConsumer) the parsing of code comments to search for begin/end code
region markers.
A comment starting with substring "LLVM-MCA-BEGIN" marks the beginning of a new
region of code. A comment starting with substring "LLVM-MCA-END" marks the end
of the last region.
This implementation doesn't allow regions to overlap. Each region can have a
optional description; internally, each region is identified by a range of source
code locations (SMLoc).
MCInst objects are added to a region R only if the source location for the
MCInst is in the range of locations specified by R.
By default, the tool allocates an implicit "Default" code region which contains
every source location. See new tests llvm-mca-marker-*.s for a few examples.
A new Backend object is created for every region. So, the analysis is conducted
on every parsed code region. The final report is the union of the reports
generated for every code region. Note that empty regions are skipped.
Special "[#] Code Region - ..." strings are used in the report to mark the
portion which is specific to a code region only. For example, see
llvm-mca-markers-5.s.
Differential Revision: https://reviews.llvm.org/D45433
llvm-svn: 329590
Summary:
The option is helpful for large projects where it's not feasible to specify sources which
user would like to see in the report. Instead, it allows to black-list specific sources via
regular expressions (e.g. now it's possible to skip all files that have "test" in its name).
This also partially fixes https://bugs.llvm.org/show_bug.cgi?id=34277
Reviewers: vsk, morehouse, liaoyuke
Reviewed By: vsk
Subscribers: kcc, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D43907
llvm-svn: 329581
Scheduling models can now describe processor register files and retire control
units. This updates the existing documentation and the README file.
llvm-svn: 329311
This is done in preparation for D45259.
With D45259, models can specify the size of the reorder buffer, and the retire
throughput directly via tablegen.
llvm-svn: 329274
Summary:
[llvm-exegesis][RFC] Automatic Measurement of Instruction Latency/Uops
This is the code corresponding to the RFC "llvm-exegesis Automatic Measurement of Instruction Latency/Uops".
The RFC is available on the LLVM mailing lists as well as the following document
for easier reading:
https://docs.google.com/document/d/1QidaJMJUyQdRrFKD66vE1_N55whe0coQ3h1GpFzz27M/edit?usp=sharing
Subscribers: mgorny, gchatelet, orwant, llvm-commits
Differential Revision: https://reviews.llvm.org/D44519
llvm-svn: 329156
Before this patch, the "BackendStatistics" view was responsible for printing the
register file usage (as well as many other statistics).
Now users can enable register file usage statistics using the command line flag
`-register-file-stats`. By default, the tool doesn't print register file
statistics.
llvm-svn: 329083
When running dsymutil as part of your build system, it can be desirable
for warnings to be part of the end product, rather than just being
emitted to the output stream. This patch upstreams that functionality.
Differential revision: https://reviews.llvm.org/D44639
llvm-svn: 328965
Document that flag -resource-pressure can be used to enable/disable the resource
pressure view. This change should have been part of r328305.
llvm-svn: 328492
The goal of this patch is to address most of PR36874. To fully fix PR36874 we
need to split the "InstructionInfo" view from the "SummaryView". That would make
easy to check the latency and rthroughput as well.
The patch reuses all the logic from ResourcePressureView to print out the
"instruction tables".
We have an entry for every instruction in the input sequence. Each entry reports
the theoretical resource pressure distribution. Resource pressure is uniformly
distributed across all the processor resource units of a group.
At the moment, the backend pipeline is not configurable, so the only way to fix
this is by creating a different driver that simply sends instruction events to
the resource pressure view. That means, we don't use the Backend interface.
Instead, it is simpler to just have a different code-path for when flag
-instruction-tables is specified.
Once Clement addresses bug 36663, then we can port the "instruction tables"
logic into a stage of our configurable pipeline.
Updated the BtVer2 test cases (thanks Simon for the help). Now we pass flag
-instruction-tables to each modified test.
Differential Revision: https://reviews.llvm.org/D44839
llvm-svn: 328487
llvm-mca is an LLVM based performance analysis tool that can be used to
statically measure the performance of code, and to help triage potential
problems with target scheduling models.
llvm-mca uses information which is already available in LLVM (e.g. scheduling
models) to statically measure the performance of machine code in a specific cpu.
Performance is measured in terms of throughput as well as processor resource
consumption. The tool currently works for processors with an out-of-order
backend, for which there is a scheduling model available in LLVM.
The main goal of this tool is not just to predict the performance of the code
when run on the target, but also help with diagnosing potential performance
issues.
Given an assembly code sequence, llvm-mca estimates the IPC (instructions per
cycle), as well as hardware resources pressure. The analysis and reporting style
were mostly inspired by the IACA tool from Intel.
This patch is related to the RFC on llvm-dev visible at this link:
http://lists.llvm.org/pipermail/llvm-dev/2018-March/121490.html
Differential Revision: https://reviews.llvm.org/D43951
llvm-svn: 326998
This commit attempts to re-land the r324480 which was reverted in
r324493 because it broke the Windows bots. For now I disabled the two
update tests on Windows until I'm able to debug this.
Differential revision: https://reviews.llvm.org/D42880
llvm-svn: 324592
Now that dsymutil can generate accelerator tables, we can upstream the
update logic that, as the name implies, updates the accelerator tables
in an existing dSYM bundle. In combination with `-minimize` this can be
used to remove redundant .debug_(inlines|pubtypes|pubnames).
Differential revision: https://reviews.llvm.org/D42880
llvm-svn: 324480
Passing -minimize to dsymutil prevents the emission of .debug_inlines,
.debug_pubnames, and .debug_pubtypes in favor of the Apple accelerator
tables.
The actual check in the DWARF linker was added in r323655. This patch
simply enables it.
Differential revision: https://reviews.llvm.org/D42688
llvm-svn: 323812
Change symbol values in the stack_size section from being 8 bytes, to being a target dependent size.
Differential Revision: https://reviews.llvm.org/D42108
llvm-svn: 322619
Summary:
That allows to get the same data as produced by "llvm-cov report",
but in JSON format, which is better for further processing by end users.
Reviewers: vsk
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D41085
llvm-svn: 320435
Dave Lee