Summary:
A fairly simple operation as setting a breakpoint (writing a breakpoint
opcode) at a given address was going through three classes:
NativeProcessProtocol which called NativeBreakpointList, which then
called SoftwareBrekpoint, only to end up again in NativeProcessProtocol
to do the actual writing itself. This is unnecessarily complex and can
be simplified by moving all of the logic into NativeProcessProtocol
class itself, removing a lot of boilerplate.
One of the reeasons for this complexity was that (it seems)
NativeBreakpointList class was meant to hold both software and hardware
breakpoints. However, that never materialized, and hardware breakpoints
are stored in a separate map holding only hardware breakpoints.
Essentially, this patch makes software breakpoints follow that approach
by replacing the heavy SoftwareBraekpoint with a light struct of the
same name, which holds only the data necessary to describe one
breakpoint. The rest of the logic is in the main class. As, at the
lldb-server level, handling software and hardware breakpoints is very
different, this seems like a reasonable state of things.
Reviewers: krytarowski, zturner, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D52941
llvm-svn: 346093
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345693
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345686
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345678
LC_BUILD_VERSION load command handling - this
commit is a combination of patches by Adrian
Prantl and myself. llvm::Triple::BridgeOS
isn't defined yet, so all references to that
are currently commented out.
Also update Xcode project file to build the
NativePDB etc plugins.
<rdar://problem/43353615>
llvm-svn: 344209
Add a "filecheck" method to the LLDB test base. This allows test authors
to pattern match command output using FileCheck, making it possible to
write stricter tests than what `self.expect` allows.
For context (motivation, examples of stricter checking, etc), see the
lldb-dev thread: "Using FileCheck in lldb inline tests".
Differential Revision: https://reviews.llvm.org/D50751
llvm-svn: 342508
This change allows you to write a new breakpoint type where the
logic for setting breakpoints is determined by a Python callback
written using the SB API's.
Differential Revision: https://reviews.llvm.org/D51830
llvm-svn: 342185
code. This will enable disassembly of the optional subset of
neon that some Cortex cores support. Add a unit test to check
that a few of these instructions disassemble as expected.
<rdar://problem/26674303>
llvm-svn: 341623
This patch adds a new lldb-vscode tool that speaks the Microsoft Visual Studio Code debug adaptor protocol. It has full unit tests that test all packets.
This tool can be easily packaged up into a native extension and used with Visual Studio Code, and it can also be used by Nuclide
Differential Revision: https://reviews.llvm.org/D50365
llvm-svn: 339911
Patch by Shafik Yaghmour!
This reapplies an earlier version after addressing some post-commit feedback.
Differential Revision: https://reviews.llvm.org/D49271
llvm-svn: 339828
Summary:
I set up a new review, because not all the code I touched was marked as a change in old one anymore.
In preparation for this review, there were two earlier ones:
* https://reviews.llvm.org/D49612 introduced the ItaniumPartialDemangler to LLDB demangling without conceptual changes
* https://reviews.llvm.org/D49909 added a unit test that covers all relevant code paths in the InitNameIndexes() function
Primary goals for this patch are:
(1) Use ItaniumPartialDemangler's rich mangling info for building LLDB's name index.
(2) Provide a uniform interface.
(3) Improve indexing performance.
The central implementation in this patch is our new function for explicit demangling:
```
const RichManglingInfo *
Mangled::DemangleWithRichManglingInfo(RichManglingContext &, SkipMangledNameFn *)
```
It takes a context object and a filter function and provides read-only access to the rich mangling info on success, or otherwise returns null. The two new classes are:
* `RichManglingInfo` offers a uniform interface to query symbol properties like `getFunctionDeclContextName()` or `isCtorOrDtor()` that are forwarded to the respective provider internally (`llvm::ItaniumPartialDemangler` or `lldb_private::CPlusPlusLanguage::MethodName`).
* `RichManglingContext` works a bit like `LLVMContext`, it the actual `RichManglingInfo` returned from `DemangleWithRichManglingInfo()` and handles lifetime and configuration. It is likely stack-allocated and can be reused for multiple queries during batch processing.
The idea here is that `DemangleWithRichManglingInfo()` acts like a gate keeper. It only provides access to `RichManglingInfo` on success, which in turn avoids the need to handle a `NoInfo` state in every single one of its getters. Having it stored within the context, avoids extra heap allocations and aids (3). As instantiations of the IPD the are considered expensive, the context is the ideal place to store it too. An efficient filtering function `SkipMangledNameFn` is another piece in the performance puzzle and it helps to mimic the original behavior of `InitNameIndexes`.
Future potential:
* `DemangleWithRichManglingInfo()` is thread-safe, IFF using different contexts in different threads. This may be exploited in the future. (It's another thing that it has in common with `LLVMContext`.)
* The old implementation only parsed and indexed Itanium mangled names. The new `RichManglingInfo` can be extended for various mangling schemes and languages.
One problem with the implementation of RichManglingInfo is the inaccessibility of class `CPlusPlusLanguage::MethodName` (defined in source/Plugins/Language/..), from within any header in the Core components of LLDB. The rather hacky solution is to store a type erased reference and cast it to the correct type on access in the cpp - see `RichManglingInfo::get<ParserT>()`. At the moment there seems to be no better way to do it. IMHO `CPlusPlusLanguage::MethodName` should be a top-level class in order to enable forward delcarations (but that is a rather big change I guess).
First simple profiling shows a good speedup. `target create clang` now takes 0.64s on average. Before the change I observed runtimes between 0.76s an 1.01s. This is still no bulletproof data (I only ran it on one machine!), but it's a promising indicator I think.
Reviewers: labath, jingham, JDevlieghere, erik.pilkington
Subscribers: zturner, clayborg, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D50071
llvm-svn: 339291
In this patch I add support for ARM and ARM64 break pad files. There are two flavors of ARM: Apple where FP is R7, and non Apple where FP is R11. Added minimal tests that load up ARM64 and the two flavors or ARM core files with a single thread and known register values in each register. Each register is checked for the exact value.
This is a fixed version of: https://reviews.llvm.org/D49750
The changes from D49750 are:
Don't init the m_arch in the Initialize call as a system info isn't required. This keeps the thread list, module list and other tests from failing
Added -Wextended-offsetof to Xcode project so we catch use extended usages of offsetof before submission
Fixed any extended offset of warnings
Differential Revision: https://reviews.llvm.org/D50336
llvm-svn: 339032
This reverts commit r338734 (and subsequent fixups in r338772 and
r338746), because it breaks some minidump unit tests and introduces a
lot of compiler warnings.
llvm-svn: 338828
In this patch I add support for ARM and ARM64 break pad files. There are two flavors of ARM: Apple where FP is R7, and non Apple where FP is R11. Added minimal tests that load up ARM64 and the two flavors or ARM core files with a single thread and known register values in each register. Each register is checked for the exact value.
Differential Revision: https://reviews.llvm.org/D49750
llvm-svn: 338734
This broke a linux bot which doesn't support -std=c++17. The solution
is to add a decorator to skip these tests on machines with older compilers.
llvm-svn: 338162
This should have all the correct files now.
<rdar://problem/41471112>
Patch by Shafik Yaghmour.
Differential Revision: https://reviews.llvm.org/D49271
llvm-svn: 338156
Summary:
Replace the existing combination of FastDemangle and the fallback to llvm::itaniumDemangle() with LLVM's new ItaniumPartialDemangler. It slightly reduces complexity and slightly improves performance, but doesn't introduce conceptual changes. This patch is preparing for more fundamental improvements on LLDB's demangling approach.
Reviewers: friss, jingham, erik.pilkington, labath, clayborg, mgorny, davide, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: teemperor, JDevlieghere, labath, clayborg, davide, lldb-commits, mgorny, erik.pilkington
Differential Revision: https://reviews.llvm.org/D49612
llvm-svn: 337931
Summary: This class doesn't seem to be used anywhere, so we might as well remove the code.
Reviewers: labath
Reviewed By: labath
Subscribers: labath, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D49755
llvm-svn: 337855
that I used to sort it to scripts/sort-pbxproj.rb. It turns
out that Xcode will perturb the order of the file lists
every time we add a file, following its own logic, and unfortunately
we'll still end up with lots of merge conflicts when that tries
to merge to the github swift repositories. We talked this over
and we're going to keep it in a canonical state by running this
script over it when Xcode tries to reorder it.
llvm-svn: 336158
Summary:
Fixes the XCode builds that started failing when i added CompletionRequest.cpp/.h.
The patch is so large because XCode decided to write the lines back in its own order, but essentially we only added on e file.
Subscribers: srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D48858
llvm-svn: 336154
sections of lldb's xcode project file to reduce automerger
issues with the github swift repository of lldb where
the order of these entries has drifted significantly
over the years.
llvm-svn: 334872
On macOS 10.14, debugserver needs to have an entitlement do be
allowed to debug processes. Adding this to both the Xcode and
cmake build system. This shouldn't have any impact on previous
OSs.
llvm-svn: 334772
We've seen some cases on macOS where you go to instruction single
step (over a breakpoint), and single step returns but the instruction
hasn't been executed (and the pc hasn't moved.) The ThreadPlanStepOverBreakpoint
used to handle this case by accident, but the patches to handle two adjacent
breakpoints broke that accident.
This patch fixes the logic of ExplainsStop to explicitly handle the case where
the pc didn't move. It also adds a WillPop that re-enables the breakpoint we
were stepping over. We never want an unexpected path through the plan to
fool us into not doing that.
I have no idea how to make this bug happen. It is very inconsistent when it
occurs IRL. We really need a full MockProcess Plugin before we can start to write
tests for this sort of system hiccup.
<rdar://problem/38505726>
llvm-svn: 332922
PathMappingList was broken for relative and empty paths after normalization changes in FileSpec. There were also no tests for PathMappingList so I added those.
Changes include:
Change PathMappingList::ReverseRemapPath() to take FileSpec objects instead of ConstString. The only client of this was doing work to convert to and from ConstString objects for no reason.
Normalize all paths prefix and replacements that are added to the PathMappingList vector so they match the paths that have been already normalized in the debug info
Unify code in the two forms of PathMappingList::RemapPath() so only one contains the actual functionality. Prior to this, there were two versions of this code.
Use FileSpec::AppendPathComponent() and remove a long standing TODO so paths are correctly appended to each other.
Added tests for absolute, relative and empty paths.
Differential Revision: https://reviews.llvm.org/D47021
llvm-svn: 332842
This one will be used to print statistics about lldb sessions
(including, e.g. number of expression evaluation succeeded or
failed). I decided to commit the skeleton first so that we have
a clean reference on how a command should be implemented.
My future commits are going to populate this command and test
it.
<rdar://problem/36555975>
llvm-svn: 328378
It wasn't even registered.
(lldb) apropos args
No commands found pertaining to 'args'. Try 'help' to see
a complete list of debugger commands.
llvm-svn: 328370
the debugserver-mini target in debugserver. Add a new plist
which needs to be installed for debugserver-mini.
<rdar://problem/36751222>
llvm-svn: 327915
This reverts commit r327318. It breaks the Xcode and CMake Darwin
builders:
clang: error: no such file or directory:
'.../source/Plugins/Architecture/PPC64/ArchitecturePPC64.cpp'
clang: error: no input files
More details are in https://reviews.llvm.org/D42582.
llvm-svn: 327327
Removing the template arguments and most of the mutating methods from
CleanUp makes it easier to understand and reuse.
In its present state, CleanUp would be too cumbersome to adapt to cases
where multiple objects need to be released. Take for example this change
in swift-lldb:
https://github.com/apple/swift-lldb/pull/334/files#diff-6f474df750f75c8ba675f2a8408a5629R219
This change is simple to express with the new CleanUp, but not so simple
with the old version.
Differential Revision: https://reviews.llvm.org/D43662
llvm-svn: 325964
from being listed as a part of the desktop or
desktop/desktop_no_xpc Targets - they should not be
a part of any target. Having them listed as a part of
desktop target results in them being added to the
Copy Files build phase for desktop and I'm guessing
they'd end up in the manpage directory or something.
llvm-svn: 322237
(built with Xcode) from 10.9 to 10.11. It also enables the use of
libcompression in debugserver by default (these API are only present
in macOS 10.11 and newer -- 10.11 was released c. Sep 2015).
I don't know if we have people / bots building lldb on older mac
releases; if this turns out to be a problem I will revert the change.
There are some parts of lldb (e.g. debugserer's ability to report
the OS version #) that only work with 10.10 and this changes the
behavior of lldb (whether the older or newer dyld interfaces are
used) so there is some importance to updating the min required
version.
llvm-svn: 322128
"Prepare Swig Bindings" shell script phase; it
wasn't the actual input file and could lead
to incorrect dependency analysis by the build
system.
<rdar://problem/34751196>
llvm-svn: 315135
Summary:
At present, several gtests in the lldb open source codebase are using
#include statements rooted at $(SOURCE_ROOT)/${LLDB_PROJECT_ROOT}.
This patch cleans up this directory/include structure for both CMake and
Xcode build systems.
rdar://problem/33835795
Reviewers: zturner, jingham, beanz
Reviewed By: beanz
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D36598
llvm-svn: 314849
Summary:
This allows for the stack size to be configured, which isn't
possible with std::thread. Prevents overflowing the stack when
performing complex operations in the task pool on darwin,
where the default pthread stack size is only 512kb.
This also moves TaskPool from Utility to Host.
Reviewers: labath, tberghammer, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D37930
llvm-svn: 313637
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
Jason Molenda