This change is simply enhancing the existing inference algorithm to handle insertelement instructions by conservatively inserting a new instruction to propagate the vector of associated base pointers. In the process, I'm ripping out the peephole optimizations which mostly helped cover the fact this hadn't been done.
Note that most of the newly inserted nodes will be nearly immediately removed by the post insertion optimization pass introduced in 246718. Arguably, we should be trying harder to avoid the malloc traffic here, but I'd rather get the code correct, then worry about compile time.
Unlike previous extensions of the algorithm to handle more case, I discovered the existing code was causing miscompiles in some cases. In particular, we had an implicit assumption that the peephole covered *all* insert element instructions, so if we had a value directly based on a insert element the peephole didn't cover, we proceeded as if it were a base anyways. Not good. I believe we had the same issue with shufflevector which is why I adjusted the predicate for them as well.
Differential Revision: http://reviews.llvm.org/D12583
llvm-svn: 247210
Previously, the base pointer algorithm wasn't deterministic. The core fixed point was (of course), but we were inserting new nodes and optimizing them in an order which was unspecified and variable. We'd somewhat hacked around this for testing by sorting by value name, but that doesn't solve the general determinism problem.
Instead, we can use the order of traversal over the def/use graph to give us a single consistent ordering. Today, this is a DFS order, but the exact order doesn't mater provided it's deterministic for a given input.
(Q: It is safe to rely on a deterministic order of operands right?)
Note that this only fixes the determinism within a single inference step. The inference step is currently invoked many times in a non-deterministic order. That's a future change in the sequence. :)
Differential Revision: http://reviews.llvm.org/D12640
llvm-svn: 247208
Visit disjoint sets in a deterministic order based on the maximum BitSetNM
index, otherwise the order in which we visit them will depend on pointer
comparisons. This was being exposed by MSan.
llvm-svn: 247201
The 32-bit tables don't actually contain PC range data, so emitting them
is incredibly simple.
The 64-bit tables, on the other hand, use the same table for state
numbering as well as label ranges. This makes things more difficult, so
it will be implemented later.
llvm-svn: 247192
With subregister liveness enabled we can detect the case where only
parts of a register are live in, this is expressed as a 32bit lanemask.
The current code only keeps registers in the live-in list and therefore
enumerated all subregisters affected by the lanemask. This turned out to
be too conservative as the subregister may also cover additional parts
of the lanemask which are not live. Expressing a given lanemask by
enumerating a minimum set of subregisters is computationally expensive
so the best solution is to simply change the live-in list to store the
lanemasks as well. This will reduce memory usage for targets using
subregister liveness and slightly increase it for other targets
Differential Revision: http://reviews.llvm.org/D12442
llvm-svn: 247171
Now that we have an explicit iterator over the idx2MBBMap in SlotIndices
we can use the fact that segments and the idx2MBBMap is sorted by
SlotIndex position so can advance both simultaneously instead of
starting from the beginning for each segment.
This complicates the code for the subregister case somewhat but should
be more efficient and has the advantage that we get the final lanemask
for each block immediately which will be important for a subsequent
change.
Removes the now unused SlotIndexes::findMBBLiveIns function.
Differential Revision: http://reviews.llvm.org/D12443
llvm-svn: 247170
with the new pass manager, and no longer relying on analysis groups.
This builds essentially a ground-up new AA infrastructure stack for
LLVM. The core ideas are the same that are used throughout the new pass
manager: type erased polymorphism and direct composition. The design is
as follows:
- FunctionAAResults is a type-erasing alias analysis results aggregation
interface to walk a single query across a range of results from
different alias analyses. Currently this is function-specific as we
always assume that aliasing queries are *within* a function.
- AAResultBase is a CRTP utility providing stub implementations of
various parts of the alias analysis result concept, notably in several
cases in terms of other more general parts of the interface. This can
be used to implement only a narrow part of the interface rather than
the entire interface. This isn't really ideal, this logic should be
hoisted into FunctionAAResults as currently it will cause
a significant amount of redundant work, but it faithfully models the
behavior of the prior infrastructure.
- All the alias analysis passes are ported to be wrapper passes for the
legacy PM and new-style analysis passes for the new PM with a shared
result object. In some cases (most notably CFL), this is an extremely
naive approach that we should revisit when we can specialize for the
new pass manager.
- BasicAA has been restructured to reflect that it is much more
fundamentally a function analysis because it uses dominator trees and
loop info that need to be constructed for each function.
All of the references to getting alias analysis results have been
updated to use the new aggregation interface. All the preservation and
other pass management code has been updated accordingly.
The way the FunctionAAResultsWrapperPass works is to detect the
available alias analyses when run, and add them to the results object.
This means that we should be able to continue to respect when various
passes are added to the pipeline, for example adding CFL or adding TBAA
passes should just cause their results to be available and to get folded
into this. The exception to this rule is BasicAA which really needs to
be a function pass due to using dominator trees and loop info. As
a consequence, the FunctionAAResultsWrapperPass directly depends on
BasicAA and always includes it in the aggregation.
This has significant implications for preserving analyses. Generally,
most passes shouldn't bother preserving FunctionAAResultsWrapperPass
because rebuilding the results just updates the set of known AA passes.
The exception to this rule are LoopPass instances which need to preserve
all the function analyses that the loop pass manager will end up
needing. This means preserving both BasicAAWrapperPass and the
aggregating FunctionAAResultsWrapperPass.
Now, when preserving an alias analysis, you do so by directly preserving
that analysis. This is only necessary for non-immutable-pass-provided
alias analyses though, and there are only three of interest: BasicAA,
GlobalsAA (formerly GlobalsModRef), and SCEVAA. Usually BasicAA is
preserved when needed because it (like DominatorTree and LoopInfo) is
marked as a CFG-only pass. I've expanded GlobalsAA into the preserved
set everywhere we previously were preserving all of AliasAnalysis, and
I've added SCEVAA in the intersection of that with where we preserve
SCEV itself.
One significant challenge to all of this is that the CGSCC passes were
actually using the alias analysis implementations by taking advantage of
a pretty amazing set of loop holes in the old pass manager's analysis
management code which allowed analysis groups to slide through in many
cases. Moving away from analysis groups makes this problem much more
obvious. To fix it, I've leveraged the flexibility the design of the new
PM components provides to just directly construct the relevant alias
analyses for the relevant functions in the IPO passes that need them.
This is a bit hacky, but should go away with the new pass manager, and
is already in many ways cleaner than the prior state.
Another significant challenge is that various facilities of the old
alias analysis infrastructure just don't fit any more. The most
significant of these is the alias analysis 'counter' pass. That pass
relied on the ability to snoop on AA queries at different points in the
analysis group chain. Instead, I'm planning to build printing
functionality directly into the aggregation layer. I've not included
that in this patch merely to keep it smaller.
Note that all of this needs a nearly complete rewrite of the AA
documentation. I'm planning to do that, but I'd like to make sure the
new design settles, and to flesh out a bit more of what it looks like in
the new pass manager first.
Differential Revision: http://reviews.llvm.org/D12080
llvm-svn: 247167
This introduces a check that the MBBIndexList is sorted as proposed in
http://reviews.llvm.org/D12443 but split up into a separate commit.
llvm-svn: 247166
Instead of extracting both 32-bit components from the 128-bit
register. This produces fewer copies and is easier for
the copy peephole optimizer to understand and see the actual uses
as extracts from a reg_sequence.
This avoids needing to handle subregister composing in the
PeepholeOptimizer's ValueTracker for this case.
llvm-svn: 247162
Summary:
This helps mostly when we use add instructions for address calculations
that contain immediates.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12256
llvm-svn: 247157
Summary:
We are not scalarizing the wide selects in codegen for i16 and i32 and
therefore we can remove the amortization factor. We still have issues
with i64 vectors in codegen though.
Reviewers: mcrosier
Subscribers: mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12724
llvm-svn: 247156
Predicating stores requires creating extra blocks. It's much cleaner if we do this in one pass instead of mutating the CFG while writing vector instructions.
Besides which we can make use of helper functions to update domtree for us, reducing the work we need to do.
llvm-svn: 247139
Summary:
One of the vector splitting paths for extract_vector_elt tries to lower:
define i1 @via_stack_bug(i8 signext %idx) {
%1 = extractelement <2 x i1> <i1 false, i1 true>, i8 %idx
ret i1 %1
}
to:
define i1 @via_stack_bug(i8 signext %idx) {
%base = alloca <2 x i1>
store <2 x i1> <i1 false, i1 true>, <2 x i1>* %base
%2 = getelementptr <2 x i1>, <2 x i1>* %base, i32 %idx
%3 = load i1, i1* %2
ret i1 %3
}
However, the elements of <2 x i1> are not byte-addressible. The result of this
is that the getelementptr expands to '%base + %idx * (1 / 8)' which simplifies
to '%base + %idx * 0', and then simply '%base' causing all values of %idx to
extract element zero.
This commit fixes this by promoting the vector elements of <8-bits to i8 before
splitting the vector.
This fixes a number of test failures in pocl.
Reviewers: pekka.jaaskelainen
Subscribers: pekka.jaaskelainen, llvm-commits
Differential Revision: http://reviews.llvm.org/D12591
llvm-svn: 247128
Currently this hits an assert that extload should
always be supported, which assumes integer extloads.
This moves a hack out of SI's argument lowering and
is covered by existing tests.
llvm-svn: 247113
Typically these are catchpads, which hold data used to decide whether to
catch the exception or continue unwinding. We also shouldn't create MBBs
for catchendpads, cleanupendpads, or terminatepads, since no real code
can live in them.
This fixes a problem where MI passes (like the register allocator) would
try to put code into catchpad blocks, which are not executed by the
runtime. In the new world, blocks ending in invokes now have many
possible successors.
llvm-svn: 247102
Summary:
32-bit funclets have short prologues that allocate enough stack for the
largest call in the whole function. The runtime saves CSRs for the
funclet. It doesn't restore CSRs after we finally transfer control back
to the parent funciton via a CATCHRET, but that's a separate issue.
32-bit funclets also have to adjust the incoming EBP value, which is
what llvm.x86.seh.recoverframe does in the old model.
64-bit funclets need to spill CSRs as normal. For simplicity, this just
spills the same set of CSRs as the parent function, rather than trying
to compute different CSR sets for the parent function and each funclet.
64-bit funclets also allocate enough stack space for the largest
outgoing call frame, like 32-bit.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12546
llvm-svn: 247092
This change extends the bitset lowering pass to support bitsets that may
contain either functions or global variables. A function bitset is lowered to
a jump table that is laid out before one of the functions in the bitset.
Also add support for non-string bitset identifier names. This allows for
distinct metadata nodes to stand in for names with internal linkage,
as done in D11857.
Differential Revision: http://reviews.llvm.org/D11856
llvm-svn: 247080
Summary:
Add a test for a data followed by 4-byte hash value.
I use a slightly modified Jenkins hash function,
as described in https://en.wikipedia.org/wiki/Jenkins_hash_function
The modification is to ensure that hash(zeros) != 0.
Reviewers: kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12648
llvm-svn: 247076
Adds vcc to output string input for e32. Allows option
of using e64 encoding with assembler.
Also fixes these instructions not implicitly reading exec.
llvm-svn: 247074
The pass is needed to remove __nvvm_reflect calls when we link in
libdevice bitcode that comes with CUDA.
Differential Revision: http://reviews.llvm.org/D11663
llvm-svn: 247072
Summary: This patch modifies X86TargetLowering::LowerVASTART so that
struct va_list is initialized with 32 bit pointers in x32. It also
includes tests that call @llvm.va_start() for x32.
Patch by João Porto
Subscribers: llvm-commits, hjl.tools
Differential Revision: http://reviews.llvm.org/D12346
llvm-svn: 247069
Philip Reames