Fixes issue encountered in D56362, where I tried to use a
SmallSetVector<Instruction*, 128> with an excessively large number
of inline elements. This triggers an "Must allocate more buckets
than are inline" assertion inside allocateBuckets() under certain
usage patterns.
The issue is as follows: The grow() method is used either to grow
the map, or to rehash it and remove tombstones. The latter is done
if the fraction of empty (non-used, non-tombstone) elements is
below 1/8. In this case grow() is invoked with the current number
of buckets.
This is currently incorrectly handled for dense maps using the small
rep. The current implementation will switch them over to the large
rep, which violates the invariant that the large rep is only used
if there are more than InlineBuckets buckets.
This patch fixes the issue by staying in the small rep and only
moving the buckets. An alternative, if we do want to switch to the
large rep in this case, would be to relax the assertion in
allocateBuckets().
Differential Revision: https://reviews.llvm.org/D56455
This is the initial patch for the OpenMP-IR-Builder, as discussed on the
mailing list ([1] and later) and at the US Dev Meeting'19.
The design is similar to D61953 but:
- in a non-WIP status, with proper documentation and working.
- using a OpenMPKinds.def file to manage lists of directives, runtime
functions, types, ..., similar to the current Clang implementation.
- restricted to handle only (simple) barriers, to implement most
`#pragma omp barrier` directives and most implicit barriers.
- properly hooked into Clang to be used if possible (D69922).
- compatible with the remaining code generation.
Parts have been extracted into D69853.
The plan is to have multiple people working on moving logic from Clang
here once the initial scaffolding (=this patch) landed.
[1] http://lists.flang-compiler.org/pipermail/flang-dev_lists.flang-compiler.org/2019-May/000197.html
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: mgorny, hiraditya, bollu, guansong, jfb, cfe-commits, llvm-commits, penzn, ppenzin
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69785
Summary:
This patch adds a method to determine if a loop is in rotated form (the latch is
an exiting block). It also modifies the getLoopGuardBranch method to use this
new method. This method can also be used in Loopfusion. Once this patch lands I
will make the corresponding changes there.
Reviewers: jdoerfert, Meinersbur, dmgreen, etiotto, Whitney, fhahn, hfinkel
Reviewed By: Meinersbur
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65958
The Isa register is a uint8_t, but at least on Windows this is
internally an unsigned char, which meant that prior to this patch it got
formatted as an ASCII character, rather than a decimal number. This
patch fixes this by casting it to a uint64_t before printing. I did it
this way instead of using a uint8_t formatter because a) it is simpler,
and b) it allows us to change the internal type of Isa in the future
without this code breaking.
I also took the opportunity to test the printing of the other standard
opcodes.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D71274
This patch introduced the VFDatabase, the framework proposed in
http://lists.llvm.org/pipermail/llvm-dev/2019-June/133484.html. [*]
In this patch the VFDatabase is used to bridge the TargetLibraryInfo
(TLI) calls that were previously used to query for the availability of
vector counterparts of scalar functions.
The VFISAKind field `ISA` of VFShape have been moved into into VFInfo,
under the assumption that different vector ISAs may provide the same
vector signature. At the moment, the vectorizer accepts any of the
available ISAs as long as the signature provided by the VFDatabase
matches the one expected in the vectorization process. For example,
when targeting AVX or AVX2, which both have 256-bit registers, the IR
signature of the two vector functions associated to the two ISAs is
the same. The `getVectorizedFunction` method at the moment returns the
first available match. We will need to add more heuristics to the
search system to decide which of the available version (TLI, AVX,
AVX2, ...) the system should prefer, when multiple versions with the
same VFShape are present.
Some of the code in this patch is based on the work done by Sumedh
Arani in https://reviews.llvm.org/D66025.
[*] Notice that in the proposal the VFDatabase was called SVFS. The
name VFDatabase is more in line with LLVM recommendations for
naming classes and variables.
Differential Revision: https://reviews.llvm.org/D67572
Extern variable usage in BPF is different from traditional
pure user space application. Recent discussion in linux bpf
mailing list has two use cases where debug info types are
required to use extern variables:
- extern types are required to have a suitable interface
in libbpf (bpf loader) to provide kernel config parameters
to bpf programs.
https://lore.kernel.org/bpf/CAEf4BzYCNo5GeVGMhp3fhysQ=_axAf=23PtwaZs-yAyafmXC9g@mail.gmail.com/T/#t
- extern types are required so kernel bpf verifier can
verify program which uses external functions more precisely.
This will make later link with actual external function no
need to reverify.
https://lore.kernel.org/bpf/87eez4odqp.fsf@toke.dk/T/#m8d5c3e87ffe7f2764e02d722cb0d8cbc136880ed
This patch added clang support to emit debuginfo for extern variables
with a TargetInfo hook to enable it. The debuginfo for the
extern variable is emitted only if that extern variable is
referenced in the current compilation unit.
Currently, only BPF target enables to generate debug info for
extern variables. The emission of such debuginfo is disabled for C++
at this moment since BPF only supports a subset of C language.
Emission with C++ can be enabled later if an appropriate use case
is identified.
-fstandalone-debug permits us to see more debuginfo with the cost
of bloated binary size. This patch did not add emission of extern
variable debug info with -fstandalone-debug. This can be
re-evaluated if there is a real need.
Differential Revision: https://reviews.llvm.org/D70696
Implement LWG#1203 (https://cplusplus.github.io/LWG/issue1203) for raw_ostream
like libc++ does for std::basic_ostream<...>.
Add a operator<< overload that takes an rvalue reference of a typed derived from
raw_ostream, streams the value to it and returns the stream of the same type as
the argument.
This allows free operator<< to work with rvalue reference raw_ostreams:
raw_ostream& operator<<(raw_ostream&, const SomeType& Value);
raw_os_ostream(std::cout) << SomeType();
It also allows using the derived type like:
auto Foo = (raw_string_ostream(buffer) << "foo").str();
Author: Christian Sigg <csigg@google.com>
Differential Revision: https://reviews.llvm.org/D70686
It appears that the cl::bits options are not used anywhere in-tree. In
the recent addition to add Callback's to the options, the Callback was
missing from this one. This fixes it by adding the same code from the
other classes.
It also adds a simple test, of sorts, just to make sure these continue
compiling.
AssumptionCache can be null in SimplifyCFGOptions. However, FoldCondBranchOnPHI() was not properly handling that when passing a null AssumptionCache to simplifyCFG.
Patch by Rodrigo Caetano Rocha <rcor.cs@gmail.com>
Reviewers: fhahn, lebedev.ri, spatel
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D69963
The file is intended to gather various VPlan transformations, not only
CFG related transforms. Actually, the only transformation there is not
CFG related.
Reviewers: Ayal, gilr, hsaito, rengolin
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D70732
Summary:
Add a new cl::callback attribute to Option.
This attribute specifies a callback function that is called when
an option is seen, and can be used to set other options, as in
option A implies option B. If the option is a `cl::list`, and
`cl::CommaSeparated` is also specified, the callback will fire
once for each value. This could be used to validate combinations
or selectively set other options.
Reviewers: beanz, thomasfinch, MaskRay, thopre, serge-sans-paille
Reviewed By: beanz
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70620
Summary:
The immediate forms of the MVE VQSHL instruction have MC names like
`MVE_VSLIimms8` and `MVE_VSLIimmu32`. Those names are confusing,
because VSLI is a completely different shift instruction with no
semantic relation to VQSHL. But it just happens to be defined
immediately before VQSHL in `ARMInstrMVE.td`, so this looks like a
copy-paste error. Renamed the ids to match the instruction name.
Reviewers: ostannard, dmgreen, MarkMurrayARM, miyuki
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71114
InnerLoopVectorizer's code called during VPlan execution still relies on
original IR's def-use relations to decide which vector code to generate,
limiting VPlan transformations ability to modify def-use relations and still
have ILV generate the vector code.
This commit moves GEP operand queries controlling how GEPs are widened to a
dedicated recipe and extracts GEP widening code to its own ILV method taking
those recorded decisions as arguments. This reduces ingredient def-use usage by
ILV as a step towards full VPlan-based def-use relations.
Differential revision: https://reviews.llvm.org/D69067
Summary:
Lookup functions are designed to not fully decode a FunctionInfo, LineTable or InlineInfo, they decode only what is needed into a LookupResult object. This allows lookups to avoid costly memory allocations and avoid parsing large amounts of information one a suitable match is found.
LookupResult objects contain the address that was looked up, the concrete function address range, the name of the concrete function, and a list of source locations. One for each inline function, and one for the concrete function. This allows one address to turn into multiple frames and improves the signal you get when symbolicating addresses in GSYM files.
Reviewers: labath, aprantl
Subscribers: mgorny, hiraditya, llvm-commits, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70993
Patch was reverted because https://bugs.llvm.org/show_bug.cgi?id=44048
The original patch is modified to set the strictfp IR attribute
explicitly in CodeGen instead of as a side effect of IRBuilder.
In the 2nd attempt to reapply there was a windows lit test fail, the
tests were fixed to use wildcard matching.
Differential Revision: https://reviews.llvm.org/D62731
Summary:
This patch introduces an API to build and modify vector shapes.
The validity of a VFShape can be checked with the
`hasValidParameterList` method, which is also run in an assertion each
time a VFShape is modified.
The field VFISAKind has been moved to VFInfo under the assumption that
different ISAs can map to the same VFShape (as it can be in the case
of vector extensions with the same registers size, for example AVX and
AVX2).
Reviewers: sdesmalen, jdoerfert, simoll, hsaito
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70513
Revise the coverage mapping format to reduce binary size by:
1. Naming function records and marking them `linkonce_odr`, and
2. Compressing filenames.
This shrinks the size of llc's coverage segment by 82% (334MB -> 62MB)
and speeds up end-to-end single-threaded report generation by 10%. For
reference the compressed name data in llc is 81MB (__llvm_prf_names).
Rationale for changes to the format:
- With the current format, most coverage function records are discarded.
E.g., more than 97% of the records in llc are *duplicate* placeholders
for functions visible-but-not-used in TUs. Placeholders *are* used to
show under-covered functions, but duplicate placeholders waste space.
- We reached general consensus about giving (1) a try at the 2017 code
coverage BoF [1]. The thinking was that using `linkonce_odr` to merge
duplicates is simpler than alternatives like teaching build systems
about a coverage-aware database/module/etc on the side.
- Revising the format is expensive due to the backwards compatibility
requirement, so we might as well compress filenames while we're at it.
This shrinks the encoded filenames in llc by 86% (12MB -> 1.6MB).
See CoverageMappingFormat.rst for the details on what exactly has
changed.
Fixes PR34533 [2], hopefully.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118428.html
[2] https://bugs.llvm.org/show_bug.cgi?id=34533
Differential Revision: https://reviews.llvm.org/D69471
Summary:
This is one more prep step necessary before the code gen pass instrumentation
code could go in.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70988
Summary:
This is a follow-up to D70769 and D70222, which allows propagation of
current directory down to ExpandResponseFiles for handling of relative paths.
Previously clients had to mutate FS to achieve that, which is not thread-safe
and can even be thread-hostile in the case of real file system.
Reviewers: sammccall
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70857
Constructor invocations such as `APFloat(APFloat::IEEEdouble(), 0.0)`
may seem like they accept a FP (floating point) value, but the overload
they reach is actually the `integerPart` one, not a `float` or `double`
overload (which only exists when `fltSemantics` isn't passed).
This may lead to possible loss of data, by the conversion from `float`
or `double` to `integerPart`.
To prevent future mistakes, a new constructor overload, which accepts
any FP value and marked with `delete`, to prevent its usage.
Fixes PR34095.
Differential Revision: https://reviews.llvm.org/D70425
As it can be seen from accompanying cleanup, it is not unheard of
to write `~Known.Zero` meaning "what maximal value can this KnownBits
produce". But i think `~Known.Zero` isn't *that* self-explanatory,
as compared to a method with a name.
Note that not all `~Known.Zero` places were cleaned up,
only those where this arguably improves things.
The DebugVariable class is a class declared in LiveDebugValues.cpp which
is used to uniquely identify a single variable, using its source
variable, inline location, and fragment info to do so. This patch moves
this class into DebugInfoMetadata.h, making it available in a much
broader scope.
Summary: Also adds a test to the pattern matching unit tests.
Reviewers: spatel, craig.topper, RKSimon, majnemer, lebedev.ri
Reviewed By: spatel
Subscribers: merge_guards_bot, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70892
libraries.
This patch substantially updates ORCv2's lookup API in order to support weak
references, and to better support static archives. Key changes:
-- Each symbol being looked for is now associated with a SymbolLookupFlags
value. If the associated value is SymbolLookupFlags::RequiredSymbol then
the symbol must be defined in one of the JITDylibs being searched (or be
able to be generated in one of these JITDylibs via an attached definition
generator) or the lookup will fail with an error. If the associated value is
SymbolLookupFlags::WeaklyReferencedSymbol then the symbol is permitted to be
undefined, in which case it will simply not appear in the resulting
SymbolMap if the rest of the lookup succeeds.
Since lookup now requires these flags for each symbol, the lookup method now
takes an instance of a new SymbolLookupSet type rather than a SymbolNameSet.
SymbolLookupSet is a vector-backed set of (name, flags) pairs. Clients are
responsible for ensuring that the set property (i.e. unique elements) holds,
though this is usually simple and SymbolLookupSet provides convenience
methods to support this.
-- Lookups now have an associated LookupKind value, which is either
LookupKind::Static or LookupKind::DLSym. Definition generators can inspect
the lookup kind when determining whether or not to generate new definitions.
The StaticLibraryDefinitionGenerator is updated to only pull in new objects
from the archive if the lookup kind is Static. This allows lookup to be
re-used to emulate dlsym for JIT'd symbols without pulling in new objects
from archives (which would not happen in a normal dlsym call).
-- JITLink is updated to allow externals to be assigned weak linkage, and
weak externals now use the SymbolLookupFlags::WeaklyReferencedSymbol value
for lookups. Unresolved weak references will be assigned the default value of
zero.
Since this patch was modifying the lookup API anyway, it alo replaces all of the
"MatchNonExported" boolean arguments with a "JITDylibLookupFlags" enum for
readability. If a JITDylib's associated value is
JITDylibLookupFlags::MatchExportedSymbolsOnly then the lookup will only
match against exported (non-hidden) symbols in that JITDylib. If a JITDylib's
associated value is JITDylibLookupFlags::MatchAllSymbols then the lookup will
match against any symbol defined in the JITDylib.
GCC 8 implements -fmacro-prefix-map. Like -fdebug-prefix-map, it replaces a string prefix for the __FILE__ macro.
-ffile-prefix-map is the union of -fdebug-prefix-map and -fmacro-prefix-map
Reviewed By: rnk, Lekensteyn, maskray
Differential Revision: https://reviews.llvm.org/D49466
DIExpressions with shift operators should not be fragmented for the same
reason as arithmetic operators: carry over cannot be expressed from one
fragment to the other, so an invalid result would be produced.
Differential Revision: https://reviews.llvm.org/D70601
Summary:
Related bug: https://bugs.llvm.org/show_bug.cgi?id=40648
Static helper function rewriteDebugUsers in Local.cpp deletes dbg.value
intrinsics when it cannot move or rewrite them, or salvage the deleted
instruction's value. It should instead undef them in this case.
This patch fixes that and I've added a test which covers the failing test
case in bz40648. I've updated the unit test Local.ReplaceAllDbgUsesWith
to check for this behaviour (and fixed a typo in the test which would
cause the old test to always pass).
Reviewers: aprantl, vsk, djtodoro, probinson
Reviewed By: vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D70604
moved before another instruction.
Summary:Added an API to check if an instruction can be safely moved
before another instruction. In future PRs, we will like to add support
of moving instructions between blocks that are not control flow
equivalent, and add other APIs to enhance usability, e.g. moving basic
blocks, moving list of instructions...
Loop Fusion will be its first user. When there is intervening code in
between two loops, fusion is currently unable to fuse them. Loop Fusion
can use this utility to check if the intervening code can be safely
moved before or after the two loops, and move them, then it can
successfully fuse them.
Reviewer:kbarton,jdoerfert,Meinersbur,bmahjour,etiotto
Reviewed By:bmahjour
Subscribers:mgorny,hiraditya,llvm-commits
Tag:LLVM
Differential Revision:https://reviews.llvm.org/D70049
Enlarge the size of ExponentType from 16bit integer to 32bit. This is
required to prevent exponent overflow/underflow.
Note that IEEEFloat size and alignment don't change in 64bit or 32bit
compilation targets (and in turn, neither does APFloat).
Fixes PR34851.
Differential Revision: https://reviews.llvm.org/D69771
Fix incorrect determination of the bigger number out of the two
subtracted, while subnormal numbers are involved.
Fixes PR44010.
Differential Revision: https://reviews.llvm.org/D69772
Nikita Popov