system headers above the includes of generated '.inc' files that
actually contain code. In a few targets this was already done pretty
consistently, but it wasn't done *really* consistently anywhere. It is
strictly cleaner IMO and necessary in a bunch of places where the
DEBUG_TYPE is referenced from the generated code. Consistency with the
necessary places trumps. Hopefully the build bots are OK with the
movement of intrin.h...
llvm-svn: 206838
This is so that EF_MIPS_NAN2008 is set if we are using IEEE 754-2008
NaN encoding (-mnan=2008). This patch also adds support for parsing
'.nan legacy' and '.nan 2008' assembly directives. The handling of
these directives should match GAS' behaviour i.e., the last directive
in use sets the ELF header bit (EF_MIPS_NAN2008).
Differential Revision: http://reviews.llvm.org/D3346
llvm-svn: 206396
This should fix the ninja-x64-msvc-RA-centos6 builder.
I suspect the check in MipsSubtarget.cpp is incorrect and is really trying to
check for a bare-metal target rather and anything other than linux. I'll
investigate this.
llvm-svn: 206385
Summary:
No functional change since these predicates are (currently) synonymous.
Extracted from a patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Differential Revision: http://llvm-reviews.chandlerc.com/D3202
llvm-svn: 204943
The Octeon cpu from Cavium Networks is mips64r2 based and has an extended
instruction set. In order to utilize this with LLVM, a new cpu feature "octeon"
and a subtarget feature "cnmips" is added. A small set of new instructions
(baddu, dmul, pop, dpop, seq, sne) is also added. LLVM generates dmul, pop and
dpop instructions with option -mcpu=octeon or -mattr=+cnmips.
llvm-svn: 204337
Summary:
This should fix the MCJIT unit tests that were broken by r201792 on the MIPS buildbot.
MIPS currently uses the default implementation of sys::getHostCPUName() which
always returns "generic". For now, we will accept "generic" and coerce it to
"mips32" or "mips64" depending on the target architecture like we do for empty
CPU names.
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2878
llvm-svn: 202253
Summary:
This removes the need to coerce UnknownABI to the default ABI (O32 for
MIPS32, N64 for MIPS64 [*]) in both MipsSubtarget and MipsAsmParser.
Clang has been updated to disable both possible default ABI's before enabling
the ABI it intends to use.
[*] N64 being the default for MIPS64 is not actually correct.
However N32 is not fully implemented/tested yet.
Depends on: D2830
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2832
Differential Revision: http://llvm-reviews.chandlerc.com/D2846
llvm-svn: 201792
Summary:
This is consistent with the integrated assembler.
All mips64 codegen tests previously passed -mcpu. Removed -mcpu from
blez_bgez.ll and const-mult.ll to cover the default case.
Ideally, the two implementations of selectMipsCPU() will be merged but it's
proven difficult to find a home for the function that doesn't cause link errors.
For now, we'll hoist the common functionality into a function and mark it with
FIXME's.
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2830
llvm-svn: 201782
This patch adds NaCl target for Mips. It also forbids indexed loads and
stores if the target is NaCl.
Patch by Sasa Stankovic.
Differential Revision: http://llvm-reviews.chandlerc.com/D2690
llvm-svn: 200855
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
llvm-svn: 198685
conditional branches for very large targets. That will be the next small
patch. Everything now should in principle work as good (functionality
wise) as without constant islands so we decided at Mips/Imagination to
make constant islands the default for Mips16 now so that it will get
excercised a lot and this port is still experimentatl though hopefully soon
we will change the status. Some more cleanup and code review is in order
but things are converging fast.
llvm-svn: 195902
Hard float for mips16 means essentially to compile as soft float but to
use a runtime library for soft float that is written with native mips32
floating point instructions (those runtime routines run in mips32 hard
float mode).
The patch reviewed by Reed Kotler.
llvm-svn: 195123
Before I just ported the shell of the pass. I've tried to keep everything
nearly identical to the ARM version. I think it will be very easy to eventually
merge these two and create a new more general pass that other targets can
use. I have some improvements I would like to make to allow pools to
be shared across functions and some other things. When I'm all done we
can think about making a more general pass. More to be ported but the
basic mechanism works now almost as good as gcc mips16.
llvm-svn: 193509
has hard float, when you compile the mips32 code you have to make sure
that it knows to compile any mips32 routines as hard float. I need to clean
up the way mips16 hard float is specified but I need to first think through
all the details. Mips16 always has a form of soft float, the difference being
whether the underlying hardware has floating point. So it's not really
necessary to pass the -soft-float to llvm since soft-float is always true
for mips16 by virtue of the fact that it will not register floating point
registers. By using this fact, I can simplify the way this is all handled.
llvm-svn: 189690
This regards how mips16 is viewed. It's not really a target type but
there has always been a target for it in the td files. It's more properly
-mcpu=mips32 -mattr=+mips16 . This is how clang treats it but we have
always had the -mcpu=mips16 which I probably should delete now but it will
require updating all the .ll test cases for mips16. In this case it changed
how we decide if we have a count bits instruction and whether instruction
lowering should then expand ctlz. Now that we have dual mode compilation,
-mattr=+mips16 really just indicates the inital processor mode that
we are compiling for. (It is also possible to have -mcpu=64 -mattr=+mips16
but as far as I know, nobody has even built such a processor, though there
is an architecture manual for this).
llvm-svn: 188586
* msa SubtargetFeature
* registers
* ld.[bhwd], and st.[bhwd] instructions
Does not correctly prohibit use of both 32-bit FPU registers and MSA together.
Patch by Daniel Sanders
llvm-svn: 188313
mips16/mips32 floating point interoperability.
This patch fixes returns from mips16 functions so that if the function
was in fact called by a mips32 hard float routine, then values
that would have been returned in floating point registers are so returned.
Mips16 mode has no floating point instructions so there is no way to
load values into floating point registers.
This is needed when returning float, double, single complex, double complex
in the Mips ABI.
Helper functions in libc for mips16 are available to do this.
For efficiency purposes, these helper functions have a different calling
convention from normal Mips calls.
Registers v0,v1,a0,a1 are used to pass parameters instead of
a0,a1,a2,a3.
This is because v0,v1,a0,a1 are the natural registers used to return
floating point values in soft float. These values can then be moved
to the appropriate floating point registers with no extra cost.
The only register that is modified is ra in this call.
The helper functions make sure that the return values are in the floating
point registers that they would be in if soft float was not in effect
(which it is for mips16, though the soft float is implemented using a mips32
library that uses hard float).
llvm-svn: 181641
Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this
would happen as long as floating point instructions are not needed.
Probably it would also make sense to compile as mips32 if atomic operations
are needed too. There may be other cases too.
A module pass prescans the IR and adds the mips16 or nomips16 attribute
to functions depending on the functions needs.
Mips 16 mode can result in a 40% code compression by utililizing 16 bit
encoding of many instructions.
The hope is for this to replace the traditional gcc way of dealing with
Mips16 code using floating point which involves essentially using soft float
but with a library implemented using mips32 floating point. This gcc
method also requires creating stubs so that Mips32 code can interact with
these Mips 16 functions that have floating point needs. My conjecture is
that in reality this traditional gcc method would never win over this
new method.
I will be implementing the traditional gcc method also. Some of it is already
done but I needed to do the stubs to finish the work and those required
this mips16/32 mixed mode capability.
I have more ideas for to make this new method much better and I think the old
method will just live in llvm for anyone that needs the backward compatibility
but I don't for what reason that would be needed.
llvm-svn: 179185
and mips16 on a per function basis.
Because this patch is somewhat involved I have provide an overview of the
key pieces of it.
The patch is written so as to not change the behavior of the non mixed
mode. We have tested this a lot but it is something new to switch subtargets
so we don't want any chance of regression in the mainline compiler until
we have more confidence in this.
Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1.
For that reason there are derived versions of the register info, frame info,
instruction info and instruction selection classes.
Now we register three separate passes for instruction selection.
One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then
one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and
MipsSEISelDAGToDAG.cpp).
When the ModuleISel pass runs, it determines if there is a need to switch
subtargets and if so, the owning pointers in MipsTargetMachine are
appropriately changed.
When 16Isel or SEIsel is run, they will return immediately without doing
any work if the current subtarget mode does not apply to them.
In addition, MipsAsmPrinter needs to be reset on a function basis.
The pass BasicTargetTransformInfo is substituted with a null pass since the
pass is immutable and really needs to be a function pass for it to be
used with changing subtargets. This will be fixed in a follow on patch.
llvm-svn: 179118
This calling convention was added just to handle functions which return vector
of floats. The fix committed in r165585 solves the problem.
llvm-svn: 176530
llc to recognize MIPS16 as a MIPS ASE extension. -mips16 will mean the
mips16 ASE for mips32 by default.
As part of fixing of adding this we discovered some small changes that
need to be made to MipsInstrInfo::storeRegToStackSLot and
MipsInstrInfo::loadRegFromStackSlot. We were using some "==" equality tests
where in fact we should have been using Mips::<regclas>.hasSubClassEQ instead,
per suggestion of Jakob Stoklund Olesen.
Patch by Reed Kotler.
llvm-svn: 156958
and MCSubtargetInfo.
- Added methods to update subtarget features (used when targets automatically
detect subtarget features or switch modes).
- Teach X86Subtarget to update MCSubtargetInfo features bits since the
MCSubtargetInfo layer can be shared with other modules.
- These fixes .code 16 / .code 32 support since mode switch is updated in
MCSubtargetInfo so MC code emitter can do the right thing.
llvm-svn: 134884
CPU, and feature string. Parsing some asm directives can change
subtarget state (e.g. .code 16) and it must be reflected in other
modules (e.g. MCCodeEmitter). That is, the MCSubtargetInfo instance
must be shared.
llvm-svn: 134795
Chandler Carruth