Update ARMGetSupportedArchitectureAtIndex to consider remote macOS
debugging. Currently, it defaults to an iOS triple when IsHost() returns
false. This fixes TestPlatformSDK.py on Apple Silicon.
Differential revision: https://reviews.llvm.org/D107179
Always codesign binaries on macOS. Apple Silicon has stricter
codesigning requirements, for example requiring macCatalyst binaries to
be signed. Ad-hoc sign everything like we do for other Darwin platforms.
This change makes sure that DwarfUnit does not load a .dwo file until
necessary. I also take advantage of DWARF 5's guarantee that the first
support file is also the primary file to make it possible to create
a compile unit without loading the .dwo file.
Review By: jankratochvil, dblaikie
Differential Revision: https://reviews.llvm.org/D100299
The "memory tag read" command will now tell you
when the allocation tag read does not match the logical
tag.
(lldb) memory tag read mte_buf+(8*16) mte_buf+(8*16)+48
Logical tag: 0x9
Allocation tags:
[0xfffff7ff7080, 0xfffff7ff7090): 0x8 (mismatch)
[0xfffff7ff7090, 0xfffff7ff70a0): 0x9
[0xfffff7ff70a0, 0xfffff7ff70b0): 0xa (mismatch)
The logical tag will be taken from the start address
so the end could have a different tag. You could for example
read from ptr_to_array_1 to ptr_to_array_2. Where the latter
is tagged differently to prevent buffer overflow.
The existing command will read 1 granule if you leave
off the end address. So you can also use it as a quick way
to check a single location.
(lldb) memory tag read mte_buf
Logical tag: 0x9
Allocation tags:
[0xfffff7ff7000, 0xfffff7ff7010): 0x0 (mismatch)
This avoids the need for a seperate "memory tag check" command.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D106880
The type field is a signed integer.
(https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html)
However it's not packed in the packet in the way
you might think. For example the type -1 should be:
qMemTags:<addr>,<len>:ffffffff
Instead of:
qMemTags:<addr>,<len>:-1
This change makes lldb-server's parsing more strict
and adds more tests to check that we handle negative types
correctly in lldb and lldb-server.
We only support one tag type value at this point,
for AArch64 MTE, which is positive. So this doesn't change
any of those interactions. It just brings us in line with GDB.
Also check that the test target has MTE. Previously
we just checked that we were AArch64 with a toolchain
that supports MTE.
Finally, update the tag type check for QMemTags to use
the same conversion steps that qMemTags now does.
Using static_cast can invoke UB and though we do do a limit
check to avoid this, I think it's clearer with the new method.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D104914
This reverts commit fed25ddc1c.
There has been sporadic failures in LLDB AArch64/Arm 32 buildbots since
this commit. I am temporarily reverting it see if it fixes the issue.
Differential Revision: https://reviews.llvm.org/D100243
Renamed language standard from openclcpp to openclcpp10.
Added new std values i.e. '-cl-std=clc++1.0' and
'-cl-std=CLC++1.0'.
Patch by Topotuna (Justas Janickas)!
Differential Revision: https://reviews.llvm.org/D106266
https://reviews.llvm.org/D45592 added a nice feature to be able to specify a breakpoint by a relative path. E.g. passing foo.cpp or bar/foo.cpp or zaz/bar/foo.cpp is fine. However, https://reviews.llvm.org/D68671 by mistake disabled the test that ensured this functionality works. With time, someone made a small mistake and fully broke the functionality.
So, I'm making a very simple fix and the test passes.
Differential Revision: https://reviews.llvm.org/D107126
The only remaining plugin dependency in Mangled is CPlusPlusLanguage which it
uses to extract information from C++ mangled names. The static function
GetDemangledNameWithoutArguments is written specifically for C++, so it
would make sense for this specific functionality to live in a
C++-related plugin. In order to keep this functionality in Mangled
without maintaining this dependency, I added
`Language::GetDemangledFunctionNameWithoutArguments`.
Differential Revision: https://reviews.llvm.org/D105215
This patch adds an environment variable field. This is usually used as
the basic type of a List field. This is needed to create the process
launch form.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D106999
This patch adds a Create Target form for the LLDB GUI. Additionally, an
Arch Field was introduced to input an arch and the file and directory
fields now have a required property.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D106192
If we succeed at gathering global variables for a compile
unit, there is no need to fallback to generating a manual index.
Reviewed By: jankratochvil
Differential Revision: https://reviews.llvm.org/D106355
In the latest Linux kernels synchronous tag faults
include the tag bits in their address.
This change adds logical and allocation tags to the
description of synchronous tag faults.
(asynchronous faults have no address)
Process 1626 stopped
* thread #1, name = 'a.out', stop reason = signal SIGSEGV: sync tag check fault (fault address: 0x900fffff7ff9010 logical tag: 0x9 allocation tag: 0x0)
This extends the existing description and will
show as much as it can on the rare occasion something
fails.
This change supports AArch64 MTE only but other
architectures could be added by extending the
switch at the start of AnnotateSyncTagCheckFault.
The rest of the function is generic code.
Tests have been added for synchronous and asynchronous
MTE faults.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105178
This diff introduces Hierarchical Trace Representation (HTR) and creates the `thread trace export ctf -f <filename> -t <thread_id>` command to export an Intel PT trace's HTR to Chrome Trace Format (CTF) for visualization.
See `lldb/docs/htr.rst` for context/documentation on HTR.
**Overview of Changes**
- Add HTR documentation (see `lldb/docs/htr.rst`)
- Add HTR structures (layer, block, block metadata)
- Implement "Basic Super Block" HTR pass
- Add 'thread trace export ctf' command to export the HTR of an Intel PT
trace to Chrome Trace Format (CTF)
As this diff is the first iteration of HTR and trace visualization, future diffs will build on this work by generalizing the internal design of HTR and implementing new HTR passes that provide better trace summarization/visualization.
See attached video for an example of Intel PT trace visualization:
{F17851042}
Original Author: jj10306
Submitted by: wallace
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D105741
This diff introduces Hierarchical Trace Representation (HTR) and creates the `thread trace export ctf -f <filename> -t <thread_id>` command to export an Intel PT trace's HTR to Chrome Trace Format (CTF) for visualization.
See `lldb/docs/htr.rst` for context/documentation on HTR.
**Overview of Changes**
- Add HTR documentation (see `lldb/docs/htr.rst`)
- Add HTR structures (layer, block, block metadata)
- Implement "Basic Super Block" HTR pass
- Add 'thread trace export ctf' command to export the HTR of an Intel PT
trace to Chrome Trace Format (CTF)
As this diff is the first iteration of HTR and trace visualization, future diffs will build on this work by generalizing the internal design of HTR and implementing new HTR passes that provide better trace summarization/visualization.
See attached video for an example of Intel PT trace visualization:
{F17851042}
Original Author: jj10306
Submitted by: wallace
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D105741
The default mode of "memory tag write" is to calculate the
range from the start address and the number of tags given.
(just like "memory write" does)
(lldb) memory tag write mte_buf 1 2
(lldb) memory tag read mte_buf mte_buf+48
Logical tag: 0x0
Allocation tags:
[0xfffff7ff9000, 0xfffff7ff9010): 0x1
[0xfffff7ff9010, 0xfffff7ff9020): 0x2
[0xfffff7ff9020, 0xfffff7ff9030): 0x0
This new option allows you to set an end address and have
the tags repeat until that point.
(lldb) memory tag write mte_buf 1 2 --end-addr mte_buf+64
(lldb) memory tag read mte_buf mte_buf+80
Logical tag: 0x0
Allocation tags:
[0xfffff7ff9000, 0xfffff7ff9010): 0x1
[0xfffff7ff9010, 0xfffff7ff9020): 0x2
[0xfffff7ff9020, 0xfffff7ff9030): 0x1
[0xfffff7ff9030, 0xfffff7ff9040): 0x2
[0xfffff7ff9040, 0xfffff7ff9050): 0x0
This is implemented using the QMemTags packet previously
added. We skip validating the number of tags in lldb and send
them on to lldb-server, which repeats them as needed.
Apart from the number of tags, all the other client side checks
remain. Tag values, memory range must be tagged, etc.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105183
TestGuiBasicDebug.py randomly fails due to timeouts sending out false
negatives on LLDB Arm and AArch64 Linux buildbots. I havnt found a
reliable wayy to set pexpect timeout for this test to pass regularly.
Skipping it on Arm and AArch64 Linux to silence buildbot failures.
This adds a new command for writing memory tags.
It is based on the existing "memory write" command.
Syntax: memory tag write <address-expression> <value> [<value> [...]]
(where "value" is a tag value)
(lldb) memory tag write mte_buf 1 2
(lldb) memory tag read mte_buf mte_buf+32
Logical tag: 0x0
Allocation tags:
[0xfffff7ff9000, 0xfffff7ff9010): 0x1
[0xfffff7ff9010, 0xfffff7ff9020): 0x2
The range you are writing to will be calculated by
aligning the address down to a granule boundary then
adding as many granules as there are tags.
(a repeating mode with an end address will be in a follow
up patch)
This is why "memory tag write" uses MakeTaggedRange but has
some extra steps to get this specific behaviour.
The command does all the usual argument validation:
* Address must evaluate
* You must supply at least one tag value
(though lldb-server would just treat that as a nop anyway)
* Those tag values must be valid for your tagging scheme
(e.g. for MTE the value must be > 0 and < 0xf)
* The calculated range must be memory tagged
That last error will show you the final range, not just
the start address you gave the command.
(lldb) memory tag write mte_buf_2+page_size-16 6
(lldb) memory tag write mte_buf_2+page_size-16 6 7
error: Address range 0xfffff7ffaff0:0xfffff7ffb010 is not in a memory tagged region
(note that we do not check if the region is writeable
since lldb can write to it anyway)
The read and write tag tests have been merged into
a single set of "tag access" tests as their test programs would
have been almost identical.
(also I have renamed some of the buffers to better
show what each one is used for)
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105182
The old code incorrectly calculated the start position for the search
for the third (and subsequent) instance of a particular substitution
pattern (e.g. %1).
I also added a few test cases for this parsing covering this failure.
This is a resubmission of https://reviews.llvm.org/D105160 after fixing testing issues.
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D106837
Process::HandleStateChangedEvent, we check whether a thread stopped
for eStopReasonSignal is stopped for a signal that's currently set to
"no-stop". If it is, then we don't set that thread as the currently
selected thread.
But that only happens in the part of the algorithm that's handling the
case where the previously selected thread has no stop reason. Since we
want to keep on a thread as long as it is doing something interesting,
we always prefer the current thread. That's almost right, but we
forgot to check whether the previously selected thread stopped with an
eStopReasonSignal for a "no-stop" signal. If it did, then we shouldn't
select it.
This patch adds that check. I can't figure out a good way to test
this. This is the sort of thing that Ismail's scripted process plugin
will make easy once it is a real boy. But figuring out how to do this
in a real process is not trivial.
Differential Revision: https://reviews.llvm.org/D106712
The code that figured out which breakpoints to delete was supposed
to set the result status if it found breakpoints, and then the code
that actually deleted them checked that the result's status was set.
The code for "break delete --disabled" failed to set the status if
no "protected" breakpoints were provided. This was a confusing way
to implement this, so I reworked it with early returns so it was less
error prone, and added a test case for the no arguments case.
Differential Revision: https://reviews.llvm.org/D106623
This adds memory tag writing to Process and the
GDB remote code. Supporting work for the
"memory tag write" command. (to follow)
Process WriteMemoryTags is similair to ReadMemoryTags.
It will pack the tags then call DoWriteMemoryTags.
That function will send the QMemTags packet to the gdb-remote.
The QMemTags packet follows the GDB specification in:
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
Note that lldb-server will be treating partial writes as
complete failures. So lldb doesn't need to handle the partial
write case in any special way.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105181
This is implemented using the QMemTags packet, as specified
by GDB in:
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
(recall that qMemTags was previously added to read tags)
On receipt of a valid packet lldb-server will:
* align the given address and length to granules
(most of the time lldb will have already done this
but the specification doesn't guarantee it)
* Repeat the supplied tags as many times as needed to cover
the range. (if tags > range we just use as many as needed)
* Call ptrace POKEMTETAGS to write the tags.
The ptrace step will loop just like the tag read does,
until all tags are written or we get an error.
Meaning that if ptrace succeeds it could be a partial write.
So we call it again and if we then get an error, return an error to
lldb.
We are not going to attempt to restore tags after a partial
write followed by an error. This matches the behaviour of the
existing memory writes.
The lldb-server tests have been extended to include read and
write in the same test file. With some updated function names
since "qMemTags" vs "QMemTags" isn't very clear when they're
next to each other.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105180
Copying from the inline documentation:
```
Trace exporter plug-ins operate on traces, converting the trace data provided by an \a lldb_private::TraceCursor into a different format that can be digested by other tools, e.g. Chrome Trace Event Profiler.
Trace exporters are supposed to operate on an architecture-agnostic fashion, as a TraceCursor, which feeds the data, hides the actual trace technology being used.
```
I want to use this to make the code in https://reviews.llvm.org/D105741 a plug-in. I also imagine that there will be more and more exporters being implemented, as an exporter creates something useful out of trace data. And tbh I don't want to keep adding more stuff to the lldb/Target folder.
This is the minimal definition for a TraceExporter plugin. I plan to use this with the following commands:
- thread trace export <plug-in name> [plug-in specific args]
- This command would support autocompletion of plug-in names
- thread trace export list
- This command would list the available trace exporter plug-ins
I don't plan to create yet a "process trace export" because it's easier to start analyzing the trace of a given thread than of the entire process. When we need a process-level command, we can implement it.
I also don't plan to force each "export" command implementation to support multiple threads (for example, "thread trace start 1 2 3" or "thread trace start all" operate on many threads simultaneously). The reason is that the format used by the exporter might or might not support multiple threads, so I'm leaving this decision to each trace exporter plug-in.
Differential Revision: https://reviews.llvm.org/D106501
Constructor homing reduces the amount of class type info that is emitted
by emitting conmplete type info for a class only when a constructor for
that class is emitted.
This will mainly reduce the amount of duplicate debug info in object
files. In Chrome enabling ctor homing decreased total build directory sizes
by about 30%.
It's also expected that some class types (such as unused classes)
will no longer be emitted in the debug info. This is fine, since we wouldn't
expect to need these types when debugging.
In some cases (e.g. libc++, https://reviews.llvm.org/D98750), classes
are used without calling the constructor. Since this is technically
undefined behavior, enabling constructor homing should be fine.
However Clang now has an attribute
`__attribute__((standalone_debug))` that can be used on classes to
ignore ctor homing.
Bug: https://bugs.llvm.org/show_bug.cgi?id=46537
Differential Revision: https://reviews.llvm.org/D106084
Change SetCurrentThread*() logic not to include the zero padding
in PID/TID that was a side effect of 02ef0f5ab4. This should fix
problems caused by sending 64-bit integers to 32-bit servers. Reported
by Ted Woodward.
Differential Revision: https://reviews.llvm.org/D106832
This patch expands the tree item that corresponds to the selected thread
by default in the Threads window. Additionally, the tree root item is
always expanded, which is the process in the Threads window.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D100243
This patch resolves the paths in the file/directory fields before
performing checks. Those checks are applied on the file system if
m_need_to_exist is true, so remote files can set this to false to avoid
performing host-side file system checks. Additionally, methods to get
a resolved and a direct file specs were added to be used by client code.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D106553
This patch adds a virtual method HasError to fields, it can be
overridden by fields that have errors. Additionally, a form method
CheckFieldsValidity was added to be called by actions that expects all
the field to be valid.
Differential Revision: https://reviews.llvm.org/D106459
This patch adds a new Platform Plugin Field. It is a choices field that
lists all the available platform plugins and can retrieve the name of the
selected plugin. The default selected plugin is the currently selected
one. This patch also allows for arbitrary scrolling to make scrolling
easier when setting choices.
Differential Revision: https://reviews.llvm.org/D106483
D104406 introduced an error in which, if there are multiple matchings rules for a given path, lldb was only checking for the validity in the filesystem of the first match instead of looking exhaustively one by one until a valid file is found.
Besides that, a call to consume_front was being done incorrectly, as it was modifying the input, which renders subsequent matches incorrect.
I added a test that checks for both cases.
Differential Revision: https://reviews.llvm.org/D106723
Code was added to Target::RunStopHook to make sure that we don't run stop hooks when
you stop after an expression evaluation. But the way it was done was to check that we
hadn't run an expression since the last natural stop. That failed in the case where you
stopped for a breakpoint which had run an expression, because the stop-hooks get run
after the breakpoint actions, and so by the time we got to running the stop-hooks,
we had already run a user expression.
I fixed this by adding a target ivar tracking the last natural stop ID at which we had
run a stop-hook. Then we keep track of this and make sure we run the stop-hooks only
once per natural stop.
Differential Revision: https://reviews.llvm.org/D106514
This patch updates the `ScriptedProcess::GetGenericInteger` return type
to `llvm::Optional<unsigned long long>` to match implementation.
Differential Revision: https://reviews.llvm.org/D105788
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch should address the compiler warnings due to mismatch type
comparaison.
Differential Revision: https://reviews.llvm.org/D105788
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
D105471 fixes the way we assign sizes to empty structs in C mode. Instead of
just giving them a size 0, we instead use the size we get from DWARF if possible.
After landing D105471 the TestStructTypes test started failing on Windows. The
tests checked that the size of an empty C struct is 0 while the size LLDB now
reports is 4 bytes. It turns out that 4 bytes are the actual size Clang is using
for C structs with the MicrosoftRecordLayoutBuilder. The commit that introduced
that behaviour is 00a061dccc.
This patch removes that specific check from TestStructTypes. Note that D105471
added a series of tests that already cover this case (and the added checks
automatically adjust to whatever size the target compiler chooses for empty
structs).
The test I added in commit 078003482e was using
SIGINT for testing the tab completion. The idea is to have a signal that only
has one possible completion and I ended up picking SIGIN -> SIGINT for the test.
However on non-Linux systems there is SIGINFO which is a valid completion for
`SIGIN' and so the test fails there.
This replaces SIGIN -> SIGINT with SIGPIP -> SIGPIPE completion which according
to LLDB's signal list in Host.cpp is the only valid completion.
This patch adds the ability to get a DWARFDIE's children as an LLVM range.
This way we can use for range loops to iterate over them and we can use LLVM's
algorithms like `llvm::all_of` to query all children.
The implementation has to do some small shenanigans as the iterator needs to
store a DWARFDIE, but a DWARFDIE container is also a DWARFDIE so it can't return
the iterator by value. I just made the `children` getter a templated function to
avoid the cyclic dependency.
Reviewed By: #lldb, werat, JDevlieghere
Differential Revision: https://reviews.llvm.org/D103172
This patch introduces Scripted Processes to lldb.
The goal, here, is to be able to attach in the debugger to fake processes
that are backed by script files (in Python, Lua, Swift, etc ...) and
inspect them statically.
Scripted Processes can be used in cooperative multithreading environments
like the XNU Kernel or other real-time operating systems, but it can
also help us improve the debugger testing infrastructure by writting
synthetic tests that simulates hard-to-reproduce process/thread states.
Although ScriptedProcess is not feature-complete at the moment, it has
basic execution capabilities and will improve in the following patches.
rdar://65508855
Differential Revision: https://reviews.llvm.org/D100384
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
`CompletionRequest::AddCompletion` adds the given string as completion of the
current command token. `CompletionRequest::TryCompleteCurrentArg` only adds it
if the current token is a prefix of the given string. We're using
`AddCompletion` for the `process signal` handler which means that `process
signal SIGIN` doesn't get uniquely completed to `process signal SIGINT` as we
unconditionally add all other signals (such as `SIGABRT`) as possible
completions.
By using `TryCompleteCurrentArg` we actually do the proper filtering which will
only add `SIGINT` (as that's the only signal with the prefix 'SIGIN' in the
example above).
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D105028
LLDB's DWARF parser has some heuristics for guessing and fixing up the
accessibility of C++ class/struct members after they were already created in the
internal Clang AST. The heuristic is that if a struct/class has a base class,
then it's actually a class and it's members are private unless otherwise
specified.
From what I can see this heuristic isn't sound and also unnecessary. The idea
that inheritance implies that the `class` keyword was used and the default
visibility is `private` is incorrect. Also both GCC and Clang use
`DW_TAG_structure_type` and `DW_TAG_class_type` for `struct` and `class` types
respectively, so the default visibility we infer from that information is always
correct and there is no need to fix it up.
And finally, the access specifiers we set in the Clang AST are anyway unused
within LLDB. The expression parser explicitly ignores them to give users access
to private members and there is not SBAPI functionality that exposes this
information.
This patch removes all the heuristic code for the reasons above and instead
just relies on the access values we infer from the tag kind and explicit
annotations in DWARF.
This patch is NFCI.
Reviewed By: werat
Differential Revision: https://reviews.llvm.org/D105463
C doesn't allow empty structs but Clang/GCC support them and give them a size of 0.
LLDB implements this by checking the tag kind and if it's `DW_TAG_structure_type` then
we give it a size of 0 via an empty external RecordLayout. This is done because our
internal TypeSystem is always in C++ mode (which means we would give them a size
of 1).
The current check for when we have this special case is currently too lax as types with
`DW_TAG_structure_type` can also occur in C++ with types defined using the `struct`
keyword. This means that in a C++ program with `struct Empty{};`, LLDB would return
`0` for `sizeof(Empty)` even though the correct size is 1.
This patch removes this special case and replaces it with a generic approach that just
assigns empty structs the byte_size as specified in DWARF. The GCC/Clang special
case is handles as they both emit an explicit `DW_AT_byte_size` of 0. And if another
compiler decides to use a different byte size for this case then this should also be
handled by the same code as long as that information is provided via `DW_AT_byte_size`.
Reviewed By: werat, shafik
Differential Revision: https://reviews.llvm.org/D105471
This patch adds code to process save-core for Mach-O files which
embeds an "addrable bits" LC_NOTE when the process is using a
code address mask (e.g. AArch64 v8.3 with ptrauth aka arm64e).
Add code to ObjectFileMachO to read that LC_NOTE from corefiles,
and ProcessMachCore to set the process masks based on it when reading
a corefile back in.
Also have "process status --verbose" print the current address masks
that lldb is using internally to strip ptrauth bits off of addresses.
Differential Revision: https://reviews.llvm.org/D106348
rdar://68630113
This patch adds a required property to text fields and their
derivatives. Additionally, the Process Name and PID fields in the attach
form were marked as required.
Differential Revision: https://reviews.llvm.org/D106458
This patch adds a new Process Plugin Field. It is a choices field that
lists all the available process plugins and can retrieve the name of the
selected plugin or an empty string if the default is selected.
The Attach form now uses that field instead of manually creating a
choices field.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D106467
These two classes, TraceSessionFileParser and ThreadPostMortemTrace,
seem to be useful primarily for tracing. Currently it looks like
intel-pt is the sole user of these, but that other tracing plugins could
be written in the future that take advantage of these. Unfortunately
with them in Target, there is a dependency on PluginProcessUtility. I'd
like to sever that dependency, so I moved them into a `TraceCommon`
plugin.
Differential Revision: https://reviews.llvm.org/D105649
When the user types that command 'thread trace dump info' and there's a running Trace session in LLDB, a raw trace in bytes should be printed; the command 'thread trace dump info all' should print the info for all the threads.
Original Author: hanbingwang
Reviewed By: clayborg, wallace
Differential Revision: https://reviews.llvm.org/D105717
My D99653 implemented a getter GetRnglist() for m_rnglist_table.
That was confusing as the getter returns DWARFDebugRnglistTable which
contains DWARFDebugRnglist as its elements.
Remove the DarwinLog and qStructuredDataPlugins support
from debugserver. The DarwinLog plugin was never debugged
fully and made reliable, and the underlying private APIs
it uses have migrated since 2016 so none of them exist
any longer.
Differential Revision: https://reviews.llvm.org/D106324
rdar://75073283
When we go to destroy the process, we first try to halt it, if
we succeeded and the target stopped, we want to clear out the
thread plans and breakpoints in case we still need to resume to complete
killing the process. If the target was exited or detached, it's
pointless but harmless to do this. But if the state is eStateInvalid -
for instance if we tried to interrupt the target to Halt it and that
fails - we don't want to keep trying to interact with the inferior,
so we shouldn't do this work.
This change explicitly checks eStateStopped, and only does the pre-resume
cleanup if we did manage to stop the process.
D104422 added the interface for TraceCursor, which is the main way to traverse instructions in a trace. This diff implements the corresponding cursor class for Intel PT and deletes the now obsolete code.
Besides that, the logic for the "thread trace dump instructions" was adapted to use this cursor (pretty much I ended up moving code from Trace.cpp to TraceCursor.cpp). The command by default traverses the instructions backwards, and if the user passes --forwards, then it's not forwards. More information about that is in the Options.td file.
Regarding the Intel PT cursor. All Intel PT cursors for the same thread share the same DecodedThread instance. I'm not yet implementing lazy decoding because we don't need it. That'll be for later. For the time being, the entire thread trace is decoded when the first cursor for that thread is requested.
Differential Revision: https://reviews.llvm.org/D105531
We've seen reports of crashes (none we've been able to reproduce
locally) that look like they are caused by concurrent access to a
thread plan stack. It looks like there are error paths when an
interrupt request to debugserver times out that cause this problem.
The thread plan stack access is never in a hot loop, and there
aren't enough of them for the extra data member to matter, so
there's really no good reason not to protect the access.
Adding the mutex revealed a couple of places where we were
using "auto" in an iteration when we should have been using
"auto &" - we didn't intend to copy the stack - and I fixed
those as well.
Except for preventing crashes this should be NFC.
Differential Revision: https\://reviews.llvm.org/D106122
PackTags is used by to compress tags to go in the QMemTags packet
and be passed to ptrace when writing memory tags.
The behaviour of RepeatTagsForRange matches that described for QMemTags
in the GDB documentation:
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
In addition, unpacking tags with number of tags 0 now means
do not check that number of tags matches the range.
This will be used by lldb-server to unpack tags before repeating
them to fill the requested range.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105179
Previously GetMemoryTagManager checked many things in one:
* architecture supports memory tagging
* process supports memory tagging
* memory range isn't inverted
* memory range is all tagged
Since writing follow up patches for tag writing (in review
at the moment) it has become clear that this gets unwieldy
once we add the features needed for that.
It also implies that the memory tag manager is tied to the
range you used to request it with but it is not. It's a per
process object.
Instead:
* GetMemoryTagManager just checks architecture and process.
* Then the MemoryTagManager can later be asked to check a
memory range.
This is better because:
* We don't imply that range and manager are tied together.
* A slightly diferent range calculation for tag writing
doesn't add more code to Process.
* Range checking code can now be unit tested.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105630
This change adds AllocateMemory and DeallocateMemory methods to the SBProcess
API, so that clients can allocate and deallocate memory blocks within the
process being debugged (for storing JIT-compiled code or other uses).
(I am developing a debugger + REPL using the API; it will need to store
JIT-compiled code within the target.)
Reviewed By: clayborg, jingham
Differential Revision: https://reviews.llvm.org/D105389
This patch adds a form window to attach a process, either by PID or by
name. This patch also adds support for dynamic field visibility such
that the form delegate can hide or show certain fields based on some
conditions.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D105655
Always destroy the process, regardless of its private state. This will
call the virtual function DoDestroy under the hood, giving our derived
class a chance to do the necessary tear down, including what to do when
the private state is eStateExited.
Differential revision: https://reviews.llvm.org/D106004
Based on:
[lldb-dev] proposed change to remove conditional WCHAR support in libedit wrapper
https://lists.llvm.org/pipermail/lldb-dev/2021-July/016961.html
There is already setlocale in lldb/source/Core/IOHandlerCursesGUI.cpp
but that does not apply for Editline GUI editing.
Unaware how to make automated test for this, it requires pty.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D105779
This reverts commit 82a3883715.
The original version had a copy-paste error: using the Interrupt timeout
for the ResumeSynchronous wait, which is clearly wrong. This error would
have been evident with real use, but the interrupt is long enough that it
only caused one testsuite failure (in the Swift fork).
Anyway, I found that mistake and fixed it and checked all the other places
where I had to plumb through a timeout, and added a test with a short
interrupt timeout stepping over a function that takes 3x the interrupt timeout
to complete, so that should detect a similar mistake in the future.
Original commit message:
[clang-repl] Implement partial translation units and error recovery.
https://reviews.llvm.org/D96033 contained a discussion regarding efficient
modeling of error recovery. @rjmccall has outlined the key ideas:
Conceptually, we can split the translation unit into a sequence of partial
translation units (PTUs). Every declaration will be associated with a unique PTU
that owns it.
The first key insight here is that the owning PTU isn't always the "active"
(most recent) PTU, and it isn't always the PTU that the declaration
"comes from". A new declaration (that isn't a redeclaration or specialization of
anything) does belong to the active PTU. A template specialization, however,
belongs to the most recent PTU of all the declarations in its signature - mostly
that means that it can be pulled into a more recent PTU by its template
arguments.
The second key insight is that processing a PTU might extend an earlier PTU.
Rolling back the later PTU shouldn't throw that extension away. For example, if
the second PTU defines a template, and the third PTU requires that template to
be instantiated at float, that template specialization is still part of the
second PTU. Similarly, if the fifth PTU uses an inline function belonging to the
fourth, that definition still belongs to the fourth. When we go to emit code in
a new PTU, we map each declaration we have to emit back to its owning PTU and
emit it in a new module for just the extensions to that PTU. We keep track of
all the modules we've emitted for a PTU so that we can unload them all if we
decide to roll it back.
Most declarations/definitions will only refer to entities from the same or
earlier PTUs. However, it is possible (primarily by defining a
previously-declared entity, but also through templates or ADL) for an entity
that belongs to one PTU to refer to something from a later PTU. We will have to
keep track of this and prevent unwinding to later PTU when we recognize it.
Fortunately, this should be very rare; and crucially, we don't have to do the
bookkeeping for this if we've only got one PTU, e.g. in normal compilation.
Otherwise, PTUs after the first just need to record enough metadata to be able
to revert any changes they've made to declarations belonging to earlier PTUs,
e.g. to redeclaration chains or template specialization lists.
It should even eventually be possible for PTUs to provide their own slab
allocators which can be thrown away as part of rolling back the PTU. We can
maintain a notion of the active allocator and allocate things like Stmt/Expr
nodes in it, temporarily changing it to the appropriate PTU whenever we go to do
something like instantiate a function template. More care will be required when
allocating declarations and types, though.
We would want the PTU to be efficiently recoverable from a Decl; I'm not sure
how best to do that. An easy option that would cover most declarations would be
to make multiple TranslationUnitDecls and parent the declarations appropriately,
but I don't think that's good enough for things like member function templates,
since an instantiation of that would still be parented by its original class.
Maybe we can work this into the DC chain somehow, like how lexical DCs are.
We add a different kind of translation unit `TU_Incremental` which is a
complete translation unit that we might nonetheless incrementally extend later.
Because it is complete (and we might want to generate code for it), we do
perform template instantiation, but because it might be extended later, we don't
warn if it declares or uses undefined internal-linkage symbols.
This patch teaches clang-repl how to recover from errors by disconnecting the
most recent PTU and update the primary PTU lookup tables. For instance:
```./clang-repl
clang-repl> int i = 12; error;
In file included from <<< inputs >>>:1:
input_line_0:1:13: error: C++ requires a type specifier for all declarations
int i = 12; error;
^
error: Parsing failed.
clang-repl> int i = 13; extern "C" int printf(const char*,...);
clang-repl> auto r1 = printf("i=%d\n", i);
i=13
clang-repl> quit
```
Differential revision: https://reviews.llvm.org/D104918
This patch fixes process event handling when the events are broadcasted
at launch. To do so, the patch introduces a new listener to fetch events
by hand off the event queue and then resending them ensure the event ordering.
Differental Revision: https://reviews.llvm.org/D105698
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds a helper function to test target architecture is
AArch64 or not. This also tightens isAArch64* helpers by adding an
extra architecture check.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D105483
AArch64 architecture support virtual addresses with some of the top bits ignored.
These ignored bits can host memory tags or bit masks that can serve to check for
authentication of address integrity. We need to clear away the top ignored bits
from watchpoint address to reliably hit and set watchpoints on addresses
containing tags or masks in their top bits.
This patch adds support to watch tagged addresses on AArch64/Linux.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D101361
This reverts commit 6775fc6ffa.
It also reverts "[lldb] Fix compilation by adjusting to the new ASTContext signature."
This reverts commit 03a3f86071.
We see some failures on the lldb infrastructure, these changes might play a role
in it. Let's revert it now and see if the bots will become green.
Ref: https://reviews.llvm.org/D104918
I'm not entirely sure this is the problem, but the Windows bot doesn't
seem to like this test. Let's do something similar to
command_import.test which doesn't have that issue.
In order to mirror the GetElementPtrInst::indices() API.
Wanted to use this in the IRForTarget code, and was surprised to
find that it didn't exist yet.
In one case use the source element type of the original GEP. In the
other the correct type isn't obvious to me, so use
getPointerElementType() for now.
Add the ability to silence command script import. The motivation for
this change is being able to add command script import -s
lldb.macosx.crashlog to your ~/.lldbinit without it printing the
following message at the beginning of every debug session.
"malloc_info", "ptr_refs", "cstr_refs", "find_variable", and
"objc_refs" commands have been installed, use the "--help" options on
these commands for detailed help.
In addition to forwarding the silent option to LoadScriptingModule, this
also changes ScriptInterpreterPythonImpl::ExecuteOneLineWithReturn and
ScriptInterpreterPythonImpl::ExecuteMultipleLines to honor the enable IO
option in ExecuteScriptOptions, which until now was ignored.
Note that IO is only enabled (or disabled) at the start of a session,
and for this particular use case, that's done when taking the Python
lock in LoadScriptingModule, which means that the changes to these two
functions are not strictly necessary, but (IMO) desirable nonetheless.
Differential revision: https://reviews.llvm.org/D105327
C++23 will make these conversions ambiguous - so fix them to make the
codebase forward-compatible with C++23 (& a follow-up change I've made
will make this ambiguous/invalid even in <C++23 so we don't regress
this & it generally improves the code anyway)
The current LLDB Python docs are missing documentation for all the special
members such as conversion functions (`__int__`) and other special functions
(`__len__`).
The reason for that is that the `automodapi` plugin we're using to generate the
*.rst files simply doesn't emit them. There doesn't seem to be any config option
to enable those in `automodapi` and it's not even clear why they are filtered. I
assume the leading underscore in their names makes them look like private
methods.
This patch just forcibly adds a few selected special members functions to the
list of functions that sphinx should always document. This will cause sphinx to
warn if a class doesn't have one of those functions but it's better than not
having them documented.
The main motivation here is that since `SBAddress.__int__` is one of the few
functions that is only available in the embedded Python REPL which would be good
to have in the public documentation.
Fixes rdar://64647665
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D105480
This patch adds initial support for forms for the LLDB GUI. The currently
supported form elements are Text fields, Integer fields, Boolean fields, Choices
fields, File fields, Directory fields, and List fields.
A form can be created by subclassing FormDelegate. In the constructor, field
factory methods can be used to add new fields, storing the returned pointer in a
member variable. One or more actions can be added using the AddAction method.
The method takes a function with an interface void(Window &). This function will
be executed whenever the user executes the action.
Example form definition:
```lang=cpp
class TestFormDelegate : public FormDelegate {
public:
TestFormDelegate() {
m_text_field = AddTextField("Text", "The big brown fox.");
m_file_field = AddFileField("File", "/tmp/a");
m_directory_field = AddDirectoryField("Directory", "/tmp/");
m_integer_field = AddIntegerField("Number", 5);
std::vector<std::string> choices;
choices.push_back(std::string("Choice 1"));
choices.push_back(std::string("Choice 2"));
choices.push_back(std::string("Choice 3"));
choices.push_back(std::string("Choice 4"));
choices.push_back(std::string("Choice 5"));
m_choices_field = AddChoicesField("Choices", 3, choices);
m_bool_field = AddBooleanField("Boolean", true);
TextFieldDelegate default_field =
TextFieldDelegate("Text", "The big brown fox.");
m_text_list_field = AddListField("Text List", default_field);
AddAction("Submit", [this](Window &window) { Submit(window); });
}
void Submit(Window &window) { SetError("An example error."); }
protected:
TextFieldDelegate *m_text_field;
FileFieldDelegate *m_file_field;
DirectoryFieldDelegate *m_directory_field;
IntegerFieldDelegate *m_integer_field;
BooleanFieldDelegate *m_bool_field;
ChoicesFieldDelegate *m_choices_field;
ListFieldDelegate<TextFieldDelegate> *m_text_list_field;
};
```
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D104395
References with a single '`' around them are interpreted as references instead
of text with monospaced font since the introduction of the new Python API
generator. This meant that all the single-quoted code in this document that
doesn't reference any Python class was throwing sphinx errors. This just adds
the neede extra ` around this code and fixed up the legitimate typos
(e.g. `SBframe` -> `SBFrame`).
This patch fixes a failure in `TestFunctionStarts.py` that appeared
following a change of implementation for synthetic symbol names:
https://reviews.llvm.org/D105160
The failure is caused because the previously mentioned patch removes the
object file basename from the generated synthetic symbol names to allow
them to be shared in the constant string pool.
Hence, that last check is not necessary anymore.
rdar://80092322
Differential Revision: https://reviews.llvm.org/D105366
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Extend the SetCurrentThread() method to support specifying an alternate
PID to switch to. This makes it possible to issue requests to forked
processes.
Differential Revision: https://reviews.llvm.org/D100262
Refactor SetCurrentThread() and SetCurrentThreadForRun() to reduce code
duplication and simplify it. Both methods now call common
SendSetCurrentThreadPacket() that implements the common protocol
exchange part (the only variable is sending `Hg` vs `Hc`) and returns
the selected TID. The logic is rewritten to use a StreamString
instead of snprintf().
A side effect of the change is that thread-id sent is now zero-padded.
However, this should not have practical impact on the server as both
forms are equivalent.
Differential Revision: https://reviews.llvm.org/D100459
Support using the extended thread-id syntax with Hg packet to select
a subprocess. This makes it possible to start providing support for
running some of the debugger packets against another subprocesses.
Differential Revision: https://reviews.llvm.org/D100261
While on regular Linux system (Fedora 34 GA, not updated):
* thread #1, name = '1', stop reason = hit program assert
frame #0: 0x00007ffff7e242a2 libc.so.6`raise + 322
frame #1: 0x00007ffff7e0d8a4 libc.so.6`abort + 278
frame #2: 0x00007ffff7e0d789 libc.so.6`__assert_fail_base.cold + 15
frame #3: 0x00007ffff7e1ca16 libc.so.6`__assert_fail + 70
* frame #4: 0x00000000004011bd 1`main at assert.c:7:3
On Fedora 35 pre-release one gets:
* thread #1, name = '1', stop reason = signal SIGABRT
* frame #0: 0x00007ffff7e48ee3 libc.so.6`pthread_kill@GLIBC_2.2.5 + 67
frame #1: 0x00007ffff7dfb986 libc.so.6`raise + 22
frame #2: 0x00007ffff7de5806 libc.so.6`abort + 230
frame #3: 0x00007ffff7de571b libc.so.6`__assert_fail_base.cold + 15
frame #4: 0x00007ffff7df4646 libc.so.6`__assert_fail + 70
frame #5: 0x00000000004011bd 1`main at assert.c:7:3
I did not write a testcase as one needs the specific glibc. An
artificial test would just copy the changed source.
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D105133
Commit 090306fc80 (August 2020) changed most of the arm64 SVE_PT*
macros, but apparently did not make the changes in the
NativeRegisterContextLinux_arm64.* files (or those files were pulled
over from someplace else after that commit). This change replaces the
macros NativeRegisterContextLinux_arm64.cpp with the replacement
definitions in LinuxPTraceDefines_arm64sve.h. It also includes
LinuxPTraceDefines_arm64sve.h in NativeRegisterContextLinux_arm64.h.
Differential Revision: https://reviews.llvm.org/D104826
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
- not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
- doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
- removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D105160
This patch implements a slight improvement when debugging across
platforms and remapping source paths that are in a non-native
format. See the unit test for examples.
rdar://79205675
Differential Revision: https://reviews.llvm.org/D104407
NFC.
This patch replaces the function body FindFile() with a call to
RemapPath(), since the two functions implement the same functionality.
Differential Revision: https://reviews.llvm.org/D104406
This is an NFC modernization refactoring that replaces the combination
of a bool return + reference argument, with an Optional return value.
Differential Revision: https://reviews.llvm.org/D104405
Reverts commits:
"Fix failing tests after https://reviews.llvm.org/D104488."
"Fix buildbot failure after https://reviews.llvm.org/D104488."
"Create synthetic symbol names on demand to improve memory consumption and startup times."
This series of commits broke the windows lldb bot and then failed to fix all of the failing tests.
When we check whether the Objective-C SPI is available, we need to check
for the mangled symbol name. Unlike `objc_copyRealizedClassList`, which
is C exported, the `nolock` variant is not.
Differential revision: https://reviews.llvm.org/D105136
I didn't get around to fix this change and the original commit itself seems
fine, so this looks like an existing LLDB/Clang bug that was just uncovered
by this change. Skipping while I'm investigating.
Previously, when `interpreter.save-session-on-quit` was enabled, lldb
would save the session transcript only when running the `quit` command.
This patch changes that so the transcripts are saved when the debugger
object is destroyed if the setting is enabled.
rdar://72902650
Differential Revision: https://reviews.llvm.org/D105038
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch introduces a new interpreter setting
`interpreter.save-session-directory` so the user can specify a directory
where the session transcripts will be saved.
If not set, the session transcript are saved on a temporary file.
rdar://72902842
Differential Revision: https://reviews.llvm.org/D105030
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
- not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
- doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
- removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D104488
This patch fixes a bug in dotest.py where lldb.selected_platform was
being set to host platform even after a successful connection to a
remote platform via platform url. This patch fixes this behavior and
sets selected_platform to remote_platform after a successful connection.
This patch also removes target_platform variable from run_suite.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D105060
When we run `xcrun` we don't have any user input in our command so relying on
the user's default shell doesn't make a lot of sense. If the user has set the
system shell to a something that isn't supported yet (dash, ash) then we would
run into the problem that we don't know how to escape our command string.
This patch just avoids using any shell at all as xcrun is always at the same
path.
Reviewed By: aprantl, JDevlieghere, kastiglione
Differential Revision: https://reviews.llvm.org/D104653
Remove the lldb/lldb subdirectory which I must have accidentally created
when applying a patch with the wrong prefix number.
Thank you Nico Weber for pointing this out!
cli-wrapper-mpxtable.cpp was emitting warnings from printfs of
uint64_t on 32 bit arm build. This patch makes affected printfs
in cli-wrapper-mpxtable.cpp portable accross targets variants.
Avoid standing the Objective-C runtime lock by calling
objc_copyRealizedClassList_nolock instead of objc_copyRealizedClassList.
We already guarantee that no other threads can run while we're running
this utility expression, similar to when we parse the data ourselves
from the gdb_objc_realized_classes struct.
Worst case this will crash if the list is getting edited, which won't do
any harm and we'll just try again later.
Differential revision: https://reviews.llvm.org/D104951
This was an oversight of the commit: bb93483c11 that
added support for the Frozen variants. Also added a test case for the way that
currently produces one of these variants (a copy).
This is an NFC modernization refactoring that replaces the combination
of a bool return + reference argument, with an Optional return value.
Differential Revision: https://reviews.llvm.org/D104404
These were disabled in 473a3a773e
because they failed on 32 bit platforms. (Arm for sure but I assume
any 32 bit)
This was due to the printf formatter used. These assumed
that types like uint64_t/size_t would be certain size/type and
that changes on 32 bit.
Instead use "z" to print the size_t and PRI<...> formatters
for the addr_t (always uint64_t) and the int32_t.
This corrects the test added in
31f9960c38
and temporarily patched in
3b4aad1186.
This test checks that the memory tag read
command errors when you use it on a platform
without memory tagging.
(which is why we skip the test if you actually
have MTE)
The problem with this test is that there's
two levels of unsupported each with it's own
specific error.
On anything that isn't AArch64, there's no
tagging extension we support. So you're told
that that is the case. As in "this won't ever work".
When you're on AArch64 we know that MTE could
be present on the remote and when we find that it
isn't, we tell you that instead.
Expect a different error message on AArch64 to fix
the test.
TestAArch64UnwindPAC.py started failing on LLDB buildbot as underlying
hardware does not support PAC. This patch skips this test for targets
which do not support PAC feature.
This new command looks much like "memory read"
and mirrors its basic behaviour.
(lldb) memory tag read new_buf_ptr new_buf_ptr+32
Logical tag: 0x9
Allocation tags:
[0x900fffff7ffa000, 0x900fffff7ffa010): 0x9
[0x900fffff7ffa010, 0x900fffff7ffa020): 0x0
Important proprties:
* The end address is optional and defaults to reading
1 tag if ommitted
* It is an error to try to read tags if the architecture
or process doesn't support it, or if the range asked
for is not tagged.
* It is an error to read an inverted range (end < begin)
(logical tags are removed for this check so you can
pass tagged addresses here)
* The range will be expanded to fit the tagging granule,
so you can get more tags than simply (end-begin)/granule size.
Whatever you get back will always cover the original range.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97285
This adds GDB client support for the qMemTags packet
which reads memory tags. Following the design
which was recently committed to GDB.
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
(look for qMemTags)
lldb commands will use the new Process methods
GetMemoryTagManager and ReadMemoryTags.
The former takes a range and checks that:
* The current process architecture has an architecture plugin
* That plugin provides a MemoryTagManager
* That the range of memory requested lies in a tagged range
(it will expand it to granules for you)
If all that was true you get a MemoryTagManager you
can give to ReadMemoryTags.
This two step process is done to allow commands to get the
tag manager without having to read tags as well. For example
you might just want to remove a logical tag, or error early
if a range with tagged addresses is inverted.
Note that getting a MemoryTagManager doesn't mean that the process
or a specific memory range is tagged. Those are seperate checks.
Having a tag manager just means this architecture *could* have
a tagging feature enabled.
An architecture plugin has been added for AArch64 which
will return a MemoryTagManagerAArch64MTE, which was added in a
previous patch.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D95602
This adds memory tag reading using the new "qMemTags"
packet and ptrace on AArch64 Linux.
This new packet is following the one used by GDB.
(https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html)
On AArch64 Linux we use ptrace's PEEKMTETAGS to read
tags and we assume that lldb has already checked that the
memory region actually has tagging enabled.
We do not assume that lldb has expanded the requested range
to granules and expand it again to be sure.
(although lldb will be sending aligned ranges because it happens
to need them client side anyway)
Also we don't assume untagged addresses. So for AArch64 we'll
remove the top byte before using them. (the top byte includes
MTE and other non address data)
To do the ptrace read NativeProcessLinux will ask the native
register context for a memory tag manager based on the
type in the packet. This also gives you the ptrace numbers you need.
(it's called a register context but it also has non register data,
so it saves adding another per platform sub class)
The only supported platform for this is AArch64 Linux and the only
supported tag type is MTE allocation tags. Anything else will
error.
Ptrace can return a partial result but for lldb-server we will
be treating that as an error. To succeed we need to get all the tags
we expect.
(Note that the protocol leaves room for logical tags to be
read via qMemTags but this is not going to be implemented for lldb
at this time.)
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D95601
This feature "memory-tagging+" indicates that lldb-server
supports memory tagging packets. (added in a later patch)
We check HWCAP2_MTE to decide whether to enable this
feature for Linux.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97282
This adds the MemoryTagManager class and a specialisation
of that class for AArch64 MTE tags. It provides a generic
interface for various tagging operations.
Adding/removing tags, diffing tagged pointers, etc.
Later patches will use this manager to handle memory tags
in generic code in both lldb and lldb-server.
Since it will be used in both, the base class header is in
lldb/Target.
(MemoryRegionInfo is another example of this pattern)
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97281
As a follow up of D103588, I'm reinitiating the discussion with a new proposal for traversing instructions in a trace which uses the feedback gotten in that diff.
See the embedded documentation in TraceCursor for more information. The idea is to offer an OOP way to traverse instructions exposing a minimal interface that makes no assumptions on:
- the number of instructions in the trace (i.e. having indices for instructions might be impractical for gigantic intel-pt traces, as it would require to decode the entire trace). This renders the use of indices to point to instructions impractical. Traces are big and expensive, and the consumer should try to do look linear lookups (forwards and/or backwards) and avoid random accesses (the API could be extended though, but for now I want to dicard that funcionality and leave the API extensible if needed).
- the way the instructions are represented internally by each Trace plug-in. They could be mmap'ed from a file, exist in plain vector or generated on the fly as the user requests the data.
- the actual data structure used internally for each plug-in. Ideas like having a struct TraceInstruction have been discarded because that would make the plug-in follow a certain data type, which might be costly. Instead, the user can ask the cursor for each independent property of the instruction it's pointing at.
The way to get a cursor is to ask Trace.h for the end or being cursor or a thread's trace.
There are some benefits of this approach:
- there's little cost to create a cursor, and this allows for lazily decoding a trace as the user requests data.
- each trace plug-in could decide how to cache the instructions it generates. For example, if a trace is small, it might decide to keep everything in memory, or if the trace is massive, it might decide to keep around the last thousands of instructions to speed up local searches.
- a cursor can outlive a stop point, which makes trace comparison for live processes feasible. An application of this is to compare profiling data of two runs of the same function, which should be doable with intel pt.
Differential Revision: https://reviews.llvm.org/D104422
We can extend/modify `GetMethodNameVariants` to suit our purposes here.
What symtab is looking for is alternate names we may want to use to
search for a specific symbol, and asking for variants of a name makes
the most sense here.
Differential Revision: https://reviews.llvm.org/D104067
I added asserts to these in https://reviews.llvm.org/D104525.
They are available (directly or otherwise) via the API so we
should not assert.
Restore the previous behaviour. If the message
is empty, we return early before printing anything.
For SetError don't assert that the error is a failure.
The remaining assert is in AppendRawError which
is not part of the API.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104778
Replacing existing uses with AppendError.
SetError is also part of the SBI API. This remains
but instead of calling the underlying SetError it
will call AppendError.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104768
Mostly by converting uses of GetErrorStream to AppendError,
so that the call to SetStatus is implicit.
Some remain where it isn't certain that you'll have a message
to set, or you want the output to be on stdout.
One place in CommandObjectWatchpoint previously didn't set
the status to failed at all. However it's pretty obvious
that it should do so.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104697
We should *never* use static local variables in this file as this makes
unittesting the plugin code impossible (and this whole 'testing' thing has
turned out to be rather useful so far).
TestExitDuringExpression test_exit_before_one_thread_no_unwind fails
sporadically on both Arm and AArch64 linux buildbots. This seems like
manifesting itself on a fully loaded machine. I have not found a reliable
timeout value so marking it skip for now.
Those tests are all failing for older Clang versions. This is adding the
respective test decorators for the passing Clang versions to get the recently
revived matrix bot green.
A few times tests have been flaky, presumably by crashed of lldb-vscode
itself. They can be caught by looking at the DAP logs, so I'm dumping
them when the session ends.
When the number of shared libs is massive, there could be hundreds of
thousands of short lived progress events sent to the IDE, which makes it
irresponsive while it's processing all this data. As these small jobs
take less than a second to process, the user doesn't even see them,
because the IDE only display the progress of long operations. So it's
better not to send these events.
I'm fixing that by sending only the events that are taking longer than 5
seconds to process.
In a specific run, I got the number of events from ~500k to 100, because
there was only 1 big lib to parse.
I've tried this on several small and massive targets, and it seems to
work fine.
Differential Revision: https://reviews.llvm.org/D101128
A few users recently were trying to set environment values when using lldb-vscode and were unsure of the format of the "env" launch configuration setting. Clarify the exact format as when users add the "env" launch config setting, they can see this help string in the IDE.
Differential Revision: https://reviews.llvm.org/D104578
LLDB supports having globbing regexes in the process launch arguments that will
be resolved using the user's shell. This requires that we pass the launch args
to the shell and then read back the expanded arguments using LLDB's argdumper
utility.
As the shell will not just expand the globbing regexes but all special
characters, we need to escape all non-globbing charcters such as $, &, <, >,
etc. as those otherwise are interpreted and removed in the step where we expand
the globbing characters. Also because the special characters are shell-specific,
LLDB needs to maintain a list of all the characters that need to be escaped for
each specific shell.
This patch adds the list of special characters that need to be escaped for
`zsh`. Without this patch on systems where `zsh` is the user's shell (like on
all macOS systems) having any of these special characters in your arguments or
path to the binary will cause the process launch to fail. E.g., `lldb -- ./calc
1<2` is failing without this patch. The same happens if the absolute path to
`calc` is in a directory that contains for example parentheses or other special
characters.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D104627
Without DW_CC_pass_by_* attributes that Clang 7 started to emit in this test
we don't properly read back the return value of the `get_*` functions and just
read bogus memory.
See also the TestReturnValue.py test.
Rust's v0 name mangling scheme [1] is easy to disambiguate from other
name mangling schemes because symbols always start with `_R`. The llvm
Demangle library supports demangling the Rust v0 scheme. Use it to
demangle Rust symbols.
Added unit tests that check simple symbols. Ran LLDB built with this
patch to debug some Rust programs compiled with the v0 name mangling
scheme. Confirmed symbol names were demangled as expected.
Note: enabling the new name mangling scheme requires a nightly
toolchain:
```
$ cat main.rs
fn main() {
println!("Hello world!");
}
$ $(rustup which --toolchain nightly rustc) -Z symbol-mangling-version=v0 main.rs -g
$ /home/asm/hacking/llvm/build/bin/lldb ./main --one-line 'b main.rs:2'
(lldb) target create "./main"
Current executable set to '/home/asm/hacking/llvm/rust/main' (x86_64).
(lldb) b main.rs:2
Breakpoint 1: where = main`main::main + 4 at main.rs:2:5, address = 0x00000000000076a4
(lldb) r
Process 948449 launched: '/home/asm/hacking/llvm/rust/main' (x86_64)
warning: (x86_64) /lib64/libgcc_s.so.1 No LZMA support found for reading .gnu_debugdata section
Process 948449 stopped
* thread #1, name = 'main', stop reason = breakpoint 1.1
frame #0: 0x000055555555b6a4 main`main::main at main.rs:2:5
1 fn main() {
-> 2 println!("Hello world!");
3 }
(lldb) bt
error: need to add support for DW_TAG_base_type '()' encoded with DW_ATE = 0x7, bit_size = 0
* thread #1, name = 'main', stop reason = breakpoint 1.1
* frame #0: 0x000055555555b6a4 main`main::main at main.rs:2:5
frame #1: 0x000055555555b78b main`<fn() as core::ops::function::FnOnce<()>>::call_once((null)=(main`main::main at main.rs:1), (null)=<unavailable>) at function.rs:227:5
frame #2: 0x000055555555b66e main`std::sys_common::backtrace::__rust_begin_short_backtrace::<fn(), ()>(f=(main`main::main at main.rs:1)) at backtrace.rs:125:18
frame #3: 0x000055555555b851 main`std::rt::lang_start::<()>::{closure#0} at rt.rs:49:18
frame #4: 0x000055555556c9f9 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] core::ops::function::impls::_$LT$impl$u20$core..ops..function..FnOnce$LT$A$GT$$u20$for$u20$$RF$F$GT$::call_once::h04259e4a34d07c2f at function.rs:259:13
frame #5: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panicking::try::do_call::hb8da45704d5cfbbf at panicking.rs:401:40
frame #6: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panicking::try::h4beadc19a78fec52 at panicking.rs:365:19
frame #7: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panic::catch_unwind::hc58016cd36ba81a4 at panic.rs:433:14
frame #8: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a at rt.rs:34:21
frame #9: 0x000055555555b830 main`std::rt::lang_start::<()>(main=(main`main::main at main.rs:1), argc=1, argv=0x00007fffffffcb18) at rt.rs:48:5
frame #10: 0x000055555555b6fc main`main + 28
frame #11: 0x00007ffff73f2493 libc.so.6`__libc_start_main + 243
frame #12: 0x000055555555b59e main`_start + 46
(lldb)
```
[1]: https://github.com/rust-lang/rust/issues/60705
Reviewed By: clayborg, teemperor
Differential Revision: https://reviews.llvm.org/D104054
HostInfoBase has a deleted dtor/ctor so there is no need to do the same for
all the classes inheriting from it.
Reviewed By: DavidSpickett, JDevlieghere
Differential Revision: https://reviews.llvm.org/D104221
The intention is now that AppendError/SetError/AppendRawError only
be called with some message to show. This enforces that.
For SetError with a Status and a fallback string first assert
that the Status is a failure Status. Then it calls SetError(StringRef)
which checks the message is valid. (which could be the fallback
or the Status')
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D104525
Add a new feature to process save-core on Darwin systems -- for
lldb to create a user process corefile with only the dirty (modified
memory) pages included. All of the binaries that were used in the
corefile are assumed to still exist on the system for the duration
of the use of the corefile. A new --style option to process save-core
is added, so a full corefile can be requested if portability across
systems, or across time, is needed for this corefile.
debugserver can now identify the dirty pages in a memory region
when queried with qMemoryRegionInfo, and the size of vm pages is
given in qHostInfo.
Create a new "all image infos" LC_NOTE for Mach-O which allows us
to describe all of the binaries that were loaded in the process --
load address, UUID, file path, segment load addresses, and optionally
whether code from the binary was executing on any thread. The old
"read dyld_all_image_infos and then the in-memory Mach-O load
commands to get segment load addresses" no longer works when we
only have dirty memory.
rdar://69670807
Differential Revision: https://reviews.llvm.org/D88387
Add support for extracting basic data from NetBSD/i386 core dumps.
FPU registers are not supported at the moment.
Differential Revision: https://reviews.llvm.org/D101091
This adds a basic SB API for creating and stopping traces.
Note: This doesn't add any APIs for inspecting individual instructions. That'd be a more complicated change and it might be better to enhande the dump functionality to output the data in binary format. I'll leave that for a later diff.
This also enhances the existing tests so that they test the same flow using both the command interface and the SB API.
I also did some cleanup of legacy code.
Differential Revision: https://reviews.llvm.org/D103500
When the number of shared libs is massive, there could be hundreds of
thousands of short lived progress events sent to the IDE, which makes it
irresponsive while it's processing all this data. As these small jobs
take less than a second to process, the user doesn't even see them,
because the IDE only display the progress of long operations. So it's
better not to send these events.
I'm fixing that by sending only the events that are taking longer than 5
seconds to process.
In a specific run, I got the number of events from ~500k to 100, because
there was only 1 big lib to parse.
I've tried this on several small and massive targets, and it seems to
work fine.
Differential Revision: https://reviews.llvm.org/D101128
This is part 2, covering the commands source.
Some uses remain where it's tricky to see what the
logic is or they are not used with AppendError.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104448
Since https://reviews.llvm.org/D103701 AppendError<...>
sets this for you.
This change includes all of the non-command uses.
Some uses remain where it's either tricky to reason about
the logic, or they aren't paired with AppendError calls.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104379
The idea is now that AppendError<...> will set eReturnStatusFailed
for you so you don't have to call SetStatus again.
Previously if the error message was empty, the status wouldn't
be set.
I don't think there are any sitautions where the message is in
fact empty but it potentially could be depending on where
we get the string from.
So let's set the status up front then return early if the message is empty.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104380
Clang 5 and Clang 6 can no longer parse newer versions of libc++. As we can't
specify the specific libc++ version in the decorator, let's only allow Clang
versions that can parse all currently available libc++ versions.
when dealing with -gmodules debug info.
This fixes the bot failures on Darwin.
A recent clang change (presumably https://reviews.llvm.org/D104291)
introduced a bug where .pcm files would identify themselves as
DW_LANG_C_plus_plus, but the .o that references them would identify as
DW_LANG_C_plus_plus_14. While that bug needs to be fixed, too, it
shows that the current strict comparison also isn't meaningful.
rdar://79423225
This test is using -gpubnames which is only available since Clang 8. The
original Clang 7 requirement was based on the availability of
-accel-tables=Dwarf (which the test initially used before being changed to
-gpubnames in commit 15a6df52ef ).
`vwprintw` is (in theory) using the `arargs.h` va_list while `vw_printw` is
using the `stdarg.h` va_list. It seems these days they can be used
interchangeably but `vwprintw` is marked as deprecated.
Instead dial it up explicitly.
This test started failing recently and I'm not sure why. It also
doesn't make sense to me the replacing "run" with "process launch -X 1 --"
should make any difference - run is an alias for the latter. But
it does pass with the change, and unless we are testing for the exact
run alias, it's better to ask for what we want explicitly.
This is an NFC cleanup.
Many of the API's that returned BreakpointOptions always returned valid ones.
Internally the BreakpointLocations usually have null BreakpointOptions, since they
use their owner's options until an option is set specifically on the location.
So the original code used pointers & unique_ptr everywhere for consistency.
But that made the code hard to reason about from the outside.
This patch changes the code so that everywhere an API is guaranteed to
return a non-null BreakpointOption, it returns it as a reference to make
that clear.
It also changes the Breakpoint to hold a BreakpointOption
member where it previously had a UP. Since we were always filling the UP
in the Breakpoint constructor, having the UP wasn't helping anything.
Differential Revision: https://reviews.llvm.org/D104162
This patch builds on D100521 and other related patches to add support
for unwinding stack on AArch64 systems with pointer authentication
feature enabled.
We override FixCodeAddress and FixDataAddress function in ABISysV_arm64
class. We now try to calculate and set code and data masks after reading
data_mask and code_mask registers exposed by AArch64 targets running Linux.
This patch utilizes core file linux-aarch64-pac.core for testing that
LLDB can successfully unwind stack frames in the presence of signed
return address after masking off ignored bits.
This patch also includes a AArch64 Linux native test case to demonstrate
successful back trace calculation in presence of pointer authentication
feature.
Differential Revision: https://reviews.llvm.org/D99944
DWARF doesn't describe templates itself but only actual template instantiations.
Because of that LLDB has to infer the parameters of the class template
declarations from the actual instantiations when creating the internal Clang AST
from debug info
Because there is no dedicated DIE for the class template, LLDB also creates the
`ClassTemplateDecl` implicitly when parsing a template instantiation. To avoid
creating one ClassTemplateDecls for every instantiation,
`TypeSystemClang::CreateClassTemplateDecl` will check if there is already a
`ClassTemplateDecl` in the requested `DeclContext` and will reuse a found
fitting declaration.
The logic that checks if a found class template fits to an instantiation is
currently just comparing the name of the template. So right now we map
`template<typename T> struct S;` to an instantiation with the values `S<1, 2,
3>` even though they clearly don't belong together.
This causes crashes later on when for example the Itanium mangler's
`TemplateArgManglingInfo::needExactType` method tries to find fitting the class
template parameter that fits to an instantiation value. In the example above it
will try to find the parameter for the value `2` but will just trigger a
boundary check when retrieving the parameter with index 1 from the class
template.
There are two ways we can end up with an instantiation that doesn't fit to a
class template with the same name:
1. We have two TUs with two templates that have the same name and internal
linkage.
2. A forward declared template instantiation is emitted by GCC and Clang
without an empty list of parameter values.
This patch makes the check for whether a class template declaration can be
reused more sophisticated by also comparing whether the parameter values can fit
to the found class template. If we can't find a fitting class template we
justcreate a second class template with the fitting parameters.
Fixes rdar://76592821
Reviewed By: kastiglione
Differential Revision: https://reviews.llvm.org/D100662
libstdc++ since version 11 has a conditional compilation based on
[[no_unique_address]] availability whether one element is either
inherited or put there as a field with [[no_unique_address]].
The code comment is by teemperor.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104283
One nice feature of the os_signpost API is that format string
substitutions happen in the consumer, not the logging
application. LLVM's current Signpost class doesn't take advantage of
this though and instead always uses a static "Begin/End %s" format
string.
This patch uses variadic macros to allow the API to be used as
intended. Unfortunately, the primary use-case I had in mind (the
LLDB_SCOPED_TIMER() macro) does not get much better from this, because
__PRETTY_FUNCTION__ is *not* a macro, but a static string, so
signposts created by LLDB_SCOPED_TIMER() still use a static "%s"
format string. At least LLDB_SCOPED_TIMERF() works as intended.
This reapplies the previously reverted patch with additional include
order fixes for non-modular builds of LLDB.
Differential Revision: https://reviews.llvm.org/D103575
One nice feature of the os_signpost API is that format string
substitutions happen in the consumer, not the logging
application. LLVM's current Signpost class doesn't take advantage of
this though and instead always uses a static "Begin/End %s" format
string.
This patch uses variadic macros to allow the API to be used as
intended. Unfortunately, the primary use-case I had in mind (the
LLDB_SCOPED_TIMER() macro) does not get much better from this, because
__PRETTY_FUNCTION__ is *not* a macro, but a static string, so
signposts created by LLDB_SCOPED_TIMER() still use a static "%s"
format string. At least LLDB_SCOPED_TIMERF() works as intended.
This reapplies the previsously reverted patch with additional MachO.h
macro #undefs.
Differential Revision: https://reviews.llvm.org/D103575
This documents the behaviour of the different SBType functions with notes for
the language-specific behaviour for C/C++/Objective-C. All of this reflects the
current behaviour of LLDB (even though that also means some functions behave
kinda weird but at least they are now documented to be weird)
Reviewed By: #lldb, mib
Differential Revision: https://reviews.llvm.org/D103454
This reverts commit db93e4e70a.
This modifies TestRegsters.py to account for Darwin showing
AVX registers as part of "Floating Point Registers" instead
of in a separate "Advanced Vector Extensions" category.
One nice feature of the os_signpost API is that format string
substitutions happen in the consumer, not the logging
application. LLVM's current Signpost class doesn't take advantage of
this though and instead always uses a static "Begin/End %s" format
string.
This patch uses variadic macros to allow the API to be used as
intended. Unfortunately, the primary use-case I had in mind (the
LLDB_SCOPED_TIMER() macro) does not get much better from this, because
__PRETTY_FUNCTION__ is *not* a macro, but a static string, so
signposts created by LLDB_SCOPED_TIMER() still use a static "%s"
format string. At least LLDB_SCOPED_TIMERF() works as intended.
This reapplies the previsously reverted patch with support for
platforms where signposts are unavailable.
Differential Revision: https://reviews.llvm.org/D103575
Unfortunately the Darwin signpost header also pulls in the system
MachO header and so we need to make sure to use the LLVM versions of
those definitions.
One nice feature of the os_signpost API is that format string
substitutions happen in the consumer, not the logging
application. LLVM's current Signpost class doesn't take advantage of
this though and instead always uses a static "Begin/End %s" format
string.
This patch uses variadic macros to allow the API to be used as
intended. Unfortunately, the primary use-case I had in mind (the
LLDB_SCOPED_TIMER() macro) does not get much better from this, because
__PRETTY_FUNCTION__ is *not* a macro, but a static string, so
signposts created by LLDB_SCOPED_TIMER() still use a static "%s"
format string. At least LLDB_SCOPED_TIMERF() works as intended.
Differential Revision: https://reviews.llvm.org/D103575
Both tests are passing for GCC>8 on Linux so let's mark them as passing.
TestCPPAuto was originally disabled due to "an problem with debug info generation"
in ea35dbeff2 .
TestClassTemplateParameterPack was disabled without explanation in
0f01fb39e3 .
If an inferior exits prior to the processing of a disconnect request,
then the threads executing EventThreadFunction and request_discontinue
respectively may call SendTerminatedEvent simultaneously, in turn,
testing and/or setting g_vsc.sent_terminated_event without any
synchronization. In case the thread executing EventThreadFunction sets
it before the thread executing request_discontinue has had a chance to
test it, the latter would move ahead to issue a response to the
disconnect request. Said response may be dispatched ahead of the
terminated event compelling the client to terminate the debug session
without consuming any console output that might've been generated by
the execution of terminateCommands.
Reviewed By: clayborg, wallace
Differential Revision: https://reviews.llvm.org/D103609
This reverts commit 00764c36ed and the
follow up d2223c7a49.
The original patch broke that one could use static member variables while
inside a static member functions without having a running target. It seems that
LLDB currently requires that static variables are only found via the global
variable lookup so that they can get materialized and mapped to the argument
struct of the expression.
After 00764c36ed static variables of the current
class could be found via Clang's lookup which LLDB isn't observing. This
resulting in expressions actually containing these variables as normal
globals that can't be rewritten to a member of the argument struct.
More specifically, in the test TestCPPThis, the expression
`expr --j false -- s_a` is now only passing if we have a runnable target.
I'll revert the patch as the possible fixes aren't trivial and it degrades
the debugging experience more than the issue that the revert patch addressed.
The underlying bug can be reproduced before/after this patch by stopping
in `TestCPPThis` main function and running: `e -j false -- my_a; A<int>::s_a`.
The `my_a` will pull in the `A<int>` class and the second expression will
be resolved by Clang on its own (which causes LLDB to not materialize the
static variable).
Note: A workaround is to just do `::s_a` which will force LLDB to take the global
variable lookup.
Test leaks if we run
tools/lldb/unittests/Host/HostTests without --gtest_filter
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104091
The HostInfoLinuxFields struct is supposed to be set up/torn down on
Initialize/Terminate and should contain all the state of the plugin.
`once_flags` are part of this state and should also be reset on `Terminate` so
we can re-initialize these lazy values after the next `Initialize` call.
This itself is NFC as the HostInfoLinux was broken before this patch and is
still broken afterwards. D104091 will be the proper fix.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D104093
This workaround was necessary before the major changes of managing python versions, but it is not needed anymore.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D104047
This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix
This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.
Differential revision: https://reviews.llvm.org/D103483
heap.py has a lot of large hand written expressions and each name in the
expression will be looked up by clang during expression parsing. For
function parameters this will be in Sema::ActOnParamDeclarator(...) in order to
catch redeclarations of parameters. The names are not needed and we have seen
some rare cases where since we don't have symbols we end up in
SymbolContext::FindBestGlobalDataSymbol(...) which may conflict with other global
symbols.
There may be a way to make this lookup smarter to avoid these cases but it is
not clear how well tested this path is and how much work it would be to fix it.
So we will go with this fix while we investigate more.
Ref: rdar://78265641
When executing a script command in HandleCommand(s) we currently print
its output twice
You can see this issue in action when adding a breakpoint command:
(lldb) b main
Breakpoint 1: where = main.out`main + 13 at main.cpp:2:3, address = 0x0000000100003fad
(lldb) break command add 1 -o "script print(\"Hey!\")"
(lldb) r
Process 76041 launched: '/tmp/main.out' (x86_64)
Hey!
(lldb) script print("Hey!")
Hey!
Process 76041 stopped
The issue is caused by HandleCommands using a temporary
CommandReturnObject and one of the commands (`script` in this case)
setting an immediate output stream. This causes the result to be printed
twice: once directly to the immediate output stream and once when
printing the result of HandleCommands.
This patch fixes the issue by introducing a new option to suppress
immediate output for temporary CommandReturnObjects.
Differential revision: https://reviews.llvm.org/D103349
The various maps in Symtab lead to some repetative code. This should
improve the situation somewhat.
Differential Revision: https://reviews.llvm.org/D103652
In the interests of disabling misc-no-recursion across LLVM (this seems
like a stylistic choice that is not consistent with LLVM's
style/development approach) this NFC preliminary change adjusts all the
.clang-tidy files to inherit from their parents as much as possible.
This change specifically preserves all the quirks of the current configs
in order to make it easier to review as NFC.
I validatad the change is NFC as follows:
for X in `cat ../files.txt`;
do
mkdir -p ../tmp/$(dirname $X)
touch $(dirname $X)/blaikie.cpp
clang-tidy -dump-config $(dirname $X)/blaikie.cpp > ../tmp/$(dirname $X)/after
rm $(dirname $X)/blaikie.cpp
done
(similarly for the "before" state, without this patch applied)
for X in `cat ../files.txt`;
do
echo $X
diff \
../tmp/$(dirname $X)/before \
<(cat ../tmp/$(dirname $X)/after \
| sed -e "s/,readability-identifier-naming\(.*\),-readability-identifier-naming/\1/" \
| sed -e "s/,-llvm-include-order\(.*\),llvm-include-order/\1/" \
| sed -e "s/,-misc-no-recursion\(.*\),misc-no-recursion/\1/" \
| sed -e "s/,-clang-diagnostic-\*\(.*\),clang-diagnostic-\*/\1/")
done
(using sed to strip some add/remove pairs to reduce the diff and make it easier to read)
The resulting report is:
.clang-tidy
clang/.clang-tidy
2c2
< Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,-misc-non-private-member-variables-in-classes,-readability-identifier-naming,-misc-no-recursion'
---
> Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,-misc-non-private-member-variables-in-classes,-misc-no-recursion'
compiler-rt/.clang-tidy
2c2
< Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,clang-diagnostic-*,llvm-*,-llvm-header-guard,misc-*,-misc-unused-parameters,-misc-non-private-member-variables-in-classes'
---
> Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,-misc-non-private-member-variables-in-classes,-llvm-header-guard'
flang/.clang-tidy
2c2
< Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,llvm-*,-llvm-include-order,misc-*,-misc-no-recursion,-misc-unused-parameters,-misc-non-private-member-variables-in-classes'
---
> Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,llvm-*,misc-*,-misc-unused-parameters,-misc-non-private-member-variables-in-classes,-llvm-include-order,-misc-no-recursion'
flang/include/flang/Lower/.clang-tidy
flang/include/flang/Optimizer/.clang-tidy
flang/lib/Lower/.clang-tidy
flang/lib/Optimizer/.clang-tidy
lld/.clang-tidy
lldb/.clang-tidy
llvm/tools/split-file/.clang-tidy
mlir/.clang-tidy
The `clang/.clang-tidy` change is a no-op, disabling an option that was never enabled.
The compiler-rt and flang changes are no-op reorderings of the same flags.
(side note, the .clang-tidy file in parallel-libs is broken and crashes
clang-tidy because it uses "lowerCase" as the style instead of "lower_case" -
so I'll deal with that separately)
Differential Revision: https://reviews.llvm.org/D103842
There is a common pattern:
result.AppendError(...);
result.SetStatus(eReturnStatusFailed);
I found that some commands don't actually "fail" but only
print "error: ..." because the second line got missed.
This can cause you to miss a failed command when you're
using the Python interface during testing.
(and produce some confusing script results)
I did not find any place where you would want to add
an error without setting the return status, so just
set eReturnStatusFailed whenever you add an error to
a command result.
This change does not remove any of the now redundant
SetStatus. This should allow us to see if there are any
tests that have commands unexpectedly fail with this change.
(the test suite passes for me but I don't have access to all
the systems we cover so there could be some corner cases)
Some tests that failed on x86 and AArch64 have been modified
to work with the new behaviour.
Differential Revision: https://reviews.llvm.org/D103701