It's rare but there are a small number of patterns like this:
(set i64:$dst, (add i64:$src1, i64:$src2))
These should be equivalent to register classes except they shouldn't check for
a specific register bank.
This doesn't occur in AArch64/ARM/X86 but does occasionally come up in other
in-tree targets such as BPF.
llvm-svn: 315226
After the original commit ([[ https://reviews.llvm.org/rL304088 | rL304088 ]]) was reverted, a discussion in llvm-dev was opened on 'how to accomplish this task'.
In the discussion we concluded that the best way to achieve our goal (which is to automate the folding tables and remove the manually maintained tables) is:
# Commit the tablegen backend disabled by default.
# Proceed with an incremental updating of the manual tables - while checking the validity of each added entry.
# Repeat previous step until we reach a state where the generated and the manual tables are identical. Then we can safely remove the manual tables and include the generated tables instead.
# Schedule periodical (1 week/2 weeks/1 month) runs of the pass:
- if changes appear (new entries):
- make sure the entries are legal
- If they are not, mark them as illegal to folding
- Commit the changes (if there are any).
CMake flag added for this purpose is "X86_GEN_FOLD_TABLES". Building with this flags will run the pass and emit the X86GenFoldTables.inc file under build/lib/Target/X86/ directory which is a good reference for any developer who wants to take part in the effort of completing the current folding tables.
Differential Revision: https://reviews.llvm.org/D38028
llvm-svn: 315173
The assertion tests were using count() instead of testing the find result, resulting in double the number of searches in debug/assert builds.
Instead, call find once (like the release builds do) and assert the result against end().
llvm-svn: 315151
Avoid unnecessary std::string creations in the TreePredicateFn getters and in CodeGenDAGPatterns::getSDNodeNamed
Differential Revision: https://reviews.llvm.org/D38624
llvm-svn: 315148
This addresses two sources of inconsistency in test configuration
files.
1. Substitution boundaries. Previously you would specify a
substitution, such as 'lli', and then additionally a set
of characters that should fail to match before and after
the tool. This was used, for example, so that matches that
are parts of full paths would not be replaced. But not all
tools did this, and those that did would often re-invent
the set of characters themselves, leading to inconsistency.
Now, every tool substitution defaults to using a sane set
of reasonable defaults and you have to explicitly opt out
of it. This actually fixed a few latent bugs that were
never being surfaced, but only on accident.
2. There was no standard way for the system to decide how to
locate a tool. Sometimes you have an explicit path, sometimes
we would search for it and build up a path ourselves, and
sometimes we would build up a full command line. Furthermore,
there was no standardized way to handle missing tools. Do we
warn, fail, ignore, etc? All of this is now encapsulated in
the ToolSubst class. You either specify an exact command to
run, or an instance of FindTool('<tool-name>') and everything
else just works. Furthermore, you can specify an action to
take if the tool cannot be resolved.
Differential Revision: https://reviews.llvm.org/D38565
llvm-svn: 315085
Summary:
normpath() was being called on an empty string and appended to
the environment variable in the case where the environment variable
was unset. This led to ":." being appended to the path, since
normpath() of an empty string is '.', presumably to represent cwd.
Reviewers: zturner, sqlbyme, modocache
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38542
llvm-svn: 314915
This adds a DiagnosticString member to the AsmOperand tablegen class, so
that the diagnostic text to be used when an assembly operand is
incorrect can be stored in the tablegen description of the operand,
rather than in a separate switch statement in the AsmParser.
If DiagnosticString is used for any operands, tablegen will emit a
getMatchKindDiag function, to map from diagnostic enums to strings.
Differential revision: https://reviews.llvm.org/D31606
llvm-svn: 314803
The current table-generated assembly instruction matcher returns a
64-bit error code when matching fails. Since multiple instruction
encodings with the same mnemonic can fail for different reasons, it uses
some heuristics to decide which message is important.
This heuristic does not work well for targets that have many encodings
with the same mnemonic but different operands, or which have different
versions of instructions controlled by subtarget features, as it is hard
to know which encoding the user was intending to use.
Instead of trying to improve the heuristic in the table-generated
matcher, this patch changes it to report a list of near-miss encodings.
This list contains an entry for each encoding with the correct mnemonic,
but with exactly one thing preventing it from being valid. This thing
could be a single invalid operand, a missing target feature or a failed
target-specific validation function.
The target-specific assembly parser can then report an error message
giving multiple options for instruction variants that the user may have
been trying to use. For example, I am working on a patch to use this for
ARM, which can give this error for an invalid instruction for ARMv6-M:
<stdin>:8:3: error: invalid instruction, multiple near-miss encodings found
adds r0, r1, #0x8
^
<stdin>:8:3: note: for one encoding: instruction requires: thumb2
adds r0, r1, #0x8
^
<stdin>:8:16: note: for one encoding: expected an integer in range [0, 7]
adds r0, r1, #0x8
^
<stdin>:8:16: note: for one encoding: expected a register in range [r0, r7]
adds r0, r1, #0x8
^
This also allows the target-specific assembly parser to apply its own
heuristics to suppress some errors. For example, the error "instruction
requires: arm-mode" is never going to be useful when targeting an
M-profile architecture (which does not have ARM mode).
This patch just adds the target-independent mechanism for doing this,
all targets still use the old mechanism. I've added a bit in the
AsmParser tablegen class to allow targets to switch to this new
mechanism. To use this, the target-specific assembly parser will have to
be modified for the change in signature of MatchInstructionImpl, and to
report errors based on the list of near-misses.
Differential revision: https://reviews.llvm.org/D27620
llvm-svn: 314774
Fix llvm_tools_dir attribute access not to fail when the variable is not
present. This directory is not really necessary to run lit tests,
and the code already accounts for it being None.
The reference was added in r313407, and it breaks the stand-alone lit
package in Gentoo.
Differential Revision: https://reviews.llvm.org/D38442
llvm-svn: 314620
Summary:
Also disables leak checking on lto tests, due to many leaks reported
in the system's ld64.
Reviewers: kcc, pcc, bogner, kubamracek
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D37781
llvm-svn: 314535
Also add operator<< for use with raw_ostream to InfoByHwMode and its
derived classes.
Recommitting r313989 with the fix for unresolved references: explicitly
define the operator<< in namespace llvm.
llvm-svn: 314004
Avoid unnecessary std::string creations during TypeSetByHwMode::writeToStream.
Found during investigations into PR28222
Differential Revision: https://reviews.llvm.org/D38174
llvm-svn: 313983
There were two issues, one Python 3 specific related to Unicode,
and another which is that the tool substitution for lld no longer
rejected matches where a / preceded the tool name.
llvm-svn: 313928
debuginfo-tests has need to reuse a lot of common configuration
from clang and lld, and in general it seems like all of the
projects which are tightly coupled (e.g. lld, clang, llvm, lldb,
etc) can benefit from knowing about one other. For example,
lldb needs to know various things about how to run clang in its
test suite. Since there's a lot of common substitutions and
operations that need to be shared among projects, sinking this
up into LLVM makes sense.
In addition, this patch introduces a function add_tool_substitution
which handles all the dirty intricacies of matching tool names
which was previously copied around the various config files. This
is now a simple straightforward interface which is hard to mess
up.
Differential Revision: https://reviews.llvm.org/D37944
llvm-svn: 313919
This has gone back and forth, but it seems this is necessary
after all. realpath is not sufficient because if you have a
file named 'C:\foo.txt', then both realpath('c:\foo.txt') and
realpath(C:\foo.txt') return the string that was passed to them
exactly as is, meaning the case of the drive-letter won't match.
The problem before was not that we were normalizing the case of
items going into the config map, but rather that we were
normalizing the case of something we needed to print. The value
that is used to key on the config map should never be printed.
llvm-svn: 313918
This makes all paths lowercase on Windows, which seemed like a
good idea at the time, but it means that tests can't properly
use FileCheck to match expected path names.
llvm-svn: 313889
Config map is not exposed through the command line, so testing this
is somewhat tricky. But basically we need a test that if a custom
driver builds a config map and passes it to main, it gets respected.
A config map allows config files in the source tree to be mapped
to alternate config files in the build tree. This particular test
works by having two config files in separate directories, and
setting up a config map to have that redirects A/lit.site.cfg
to B/altconfig. Then, we print a message in A/lit.site.cfg
and B/altconfig and check that we do see the output from B
but don't see the output from A. Additionally we test that
the test suite specified by A's config map is properly discovered.
Differential Revision: https://reviews.llvm.org/D38105
llvm-svn: 313887
Summary:
This appears to break some bots, when getToolsPath fails to find some or
all of the tools (for example, an incomplete GnuWin32 installation).
Reviewers: zturner, modocache
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D38115
llvm-svn: 313854
Many editors and Python-related diagnostics tools such as
debuggers break or fail in mysterious ways when python files
don't end in .py. This is especially true on Windows, but
still exists on other platforms. I don't want to be too heavy
handed in changing everything across the board, but I do want
to at least *allow* lit configs to have .py extensions. This
patch makes the discovery process first look for a config file
with a .py extension, and if one is not found, then looks for
a config file using the old method. So for existing users, there
should be no functional change.
Differential Revision: https://reviews.llvm.org/D37838
llvm-svn: 313849
This changes some STL data types to corresponding LLVM
data types that have better performance characteristics.
Differential Revision: https://reviews.llvm.org/D37957
llvm-svn: 313783
Bug pointed out by EricWF. This would construct a path where
items would be added in the wrong order, potentially leading
to using the wrong tools for testing.
llvm-svn: 313765
Many svn-based buildbots seem to be getting stuck continually
in tree conflicts due to the output of pyc files. I'm disabling
these as a temporary measure in an attempt to get everything
stable again.
I'll try to remove this code once I understand the problem
better.
llvm-svn: 313698
The generated DAG isel file currently makes use of formatted_raw_ostream primarily for generating a hierarchical representation while also skipping over the initial comment that contains the current index.
It was reported in D37957 that this formatting might be slow due to the need to keep track of column numbers by monitoring all the written data for new lines.
This patch attempts to rewrite the emitter to make use of simpler formatting mechanisms to generate a fairly similar output. The main difference is that the number in the index comment is now right justified and padded with spaces inside the comment. Previously we appended the spaces after the comment.
Differential Revision: https://reviews.llvm.org/D37966
llvm-svn: 313674
Add some member types to MachineValueTypeSet::const_iterator so that
iterator_traits can work with it.
Improve TableGen performance of -gen-dag-isel (motivated by X86 backend)
The introduction of parameterized register classes in r313271 caused the
matcher generation code in TableGen to run much slower, particularly so
in the unoptimized (debug) build. This patch recovers some of the lost
performance.
Summary of changes:
- Cache the set of legal types in TypeInfer::getLegalTypes. The contents
of this set do not change.
- Add LLVM_ATTRIBUTE_ALWAYS_INLINE to several small functions. Normally
this would not be necessary, but in the debug build TableGen is not
optimized, so this helps a little bit.
- Add an early exit from TypeSetByHwMode::operator== for the case when
one or both arguments are "simple", i.e. only have one mode. This
saves some time in GenerateVariants.
- Finally, replace the underlying storage type in TypeSetByHwMode::SetType
with MachineValueTypeSet based on std::array instead of std::set.
This significantly reduces the number of memory allocation calls.
I've done a number of experiments with the underlying type of InfoByHwMode.
The type is a map, and for targets that do not use the parameterization,
this map has only one entry. The best (unoptimized) performance, somewhat
surprisingly came from std::map, followed closely by std::unordered_map.
DenseMap was the slowest by a large margin.
Various hand-crafted solutions (emulating enough of the map interface
not to make sweeping changes to the users) did not yield any observable
improvements.
llvm-svn: 313660
The introduction of parameterized register classes in r313271 caused the
matcher generation code in TableGen to run much slower, particularly so
in the unoptimized (debug) build. This patch recovers some of the lost
performance.
Summary of changes:
- Cache the set of legal types in TypeInfer::getLegalTypes. The contents
of this set do not change.
- Add LLVM_ATTRIBUTE_ALWAYS_INLINE to several small functions. Normally
this would not be necessary, but in the debug build TableGen is not
optimized, so this helps a little bit.
- Add an early exit from TypeSetByHwMode::operator== for the case when
one or both arguments are "simple", i.e. only have one mode. This
saves some time in GenerateVariants.
- Finally, replace the underlying storage type in TypeSetByHwMode::SetType
with MachineValueTypeSet based on std::array instead of std::set.
This significantly reduces the number of memory allocation calls.
I've done a number of experiments with the underlying type of InfoByHwMode.
The type is a map, and for targets that do not use the parameterization,
this map has only one entry. The best (unoptimized) performance, somewhat
surprisingly came from std::map, followed closely by std::unordered_map.
DenseMap was the slowest by a large margin.
Various hand-crafted solutions (emulating enough of the map interface
not to make sweeping changes to the users) did not yield any observable
improvements.
llvm-svn: 313647
Since the path a user specifies to the llvm-lit script might be
different than the source tree they built from (since they could
be behind different symlinks), we need to use realpath to make
sure that path comparisons work as expected.
Even better would be to use a custom dictionary comparison with
actual file equivalence comparison semantics, but this is the
least friction to unbreak things for now.
llvm-svn: 313594
It doesn't make sense to me why these bots are failing as the
traceback does not agree with the source code. It's possible
something is stale or there is some other mysterious error,
but in any case hopefully this fixes it.
llvm-svn: 313469
A few tests were manually constructing a LitConfig object, since
I added a new argument to it this was triggering some failures
I didn't detect. `ninja check-lit` passes now.
llvm-svn: 313461
This is helpful for debugging test failures since it removes
the multiprocessing pool from the picture. This will obviously
slow down the test suite by a few orders of magnitude, so it
should only be used for debugging specific failures.
llvm-svn: 313460
It looks like this is going to be non-trivial to get working
in both Py2 and Py3, so for now I'm reverting until I have time
to fully test it under Python 3.
llvm-svn: 313429
This is a resubmission of r313270. It broke standalone builds of
compiler-rt because we were not correctly generating the llvm-lit
script in the standalone build directory.
The fixes incorporated here attempt to find llvm/utils/llvm-lit
from the source tree returned by llvm-config. If present, it
will generate llvm-lit into the output directory. Regardless,
the user can specify -DLLVM_EXTERNAL_LIT to point to a specific
lit.py on their file system. This supports the use case of
someone installing lit via a package manager. If it cannot find
a source tree, and -DLLVM_EXTERNAL_LIT is either unspecified or
invalid, then we print a warning that tests will not be able
to run.
Differential Revision: https://reviews.llvm.org/D37756
llvm-svn: 313407
This patch is still breaking several multi-stage compiler-rt bots.
I already know what the fix is, but I want to get the bots green
for now and then try re-applying in the morning.
llvm-svn: 313335
Summary:
This will be used instead of the url field to track which commits need
to be merged.
This patch also drops support for version 1.x of the bugzilla CLI tool.
Reviewers: hansw, hans
Reviewed By: hans
Subscribers: hans, llvm-commits
Differential Revision: https://reviews.llvm.org/D37786
llvm-svn: 313334
To further reduce duplicate code, this patch introduces a module
that configs can simply import and get access to a lot of useful
functionality such as setting up paths, adding features that are
useful across all projects, and other utility-type functions.
For now this only updates llvm's suite to use this new library,
but subsequent patches will update other projects.
Differential Revision: https://reviews.llvm.org/D37778
llvm-svn: 313325
These are removed in C++17. We still have some users of
unary_function::argument_type, so just spell that typedef out. No
functionality change intended.
Note that many of the argument types are actually wrong :)
llvm-svn: 313287
This replaces TableGen's type inference to operate on parameterized
types instead of MVTs, and as a consequence, some interfaces have
changed:
- Uses of MVTs are replaced by ValueTypeByHwMode.
- EEVT::TypeSet is replaced by TypeSetByHwMode.
This affects the way that types and type sets are printed, and the
tests relying on that have been updated.
There are certain users of the inferred types outside of TableGen
itself, namely FastISel and GlobalISel. For those users, the way
that the types are accessed have changed. For typical scenarios,
these replacements can be used:
- TreePatternNode::getType(ResNo) -> getSimpleType(ResNo)
- TreePatternNode::hasTypeSet(ResNo) -> hasConcreteType(ResNo)
- TypeSet::isConcrete -> TypeSetByHwMode::isValueTypeByHwMode(false)
For more information, please refer to the review page.
Differential Revision: https://reviews.llvm.org/D31951
llvm-svn: 313271
This patch simplifies LLVM's lit infrastructure by enforcing an ordering
that a site config is always run before a source-tree config.
A significant amount of the complexity from lit config files arises from
the fact that inside of a source-tree config file, we don't yet know if
the site config has been run. However it is *always* required to run
a site config first, because it passes various variables down through
CMake that the main config depends on. As a result, every config
file has to do a bunch of magic to try to reverse-engineer the location
of the site config file if they detect (heuristically) that the site
config file has not yet been run.
This patch solves the problem by emitting a mapping from source tree
config file to binary tree site config file in llvm-lit.py. Then, during
discovery when we find a config file, we check to see if we have a
target mapping for it, and if so we use that instead.
This mechanism is generic enough that it does not affect external users
of lit. They will just not have a config mapping defined, and everything
will work as normal.
On the other hand, for us it allows us to make many simplifications:
* We are guaranteed that a site config will be executed first
* Inside of a main config, we no longer have to assume that attributes
might not be present and use getattr everywhere.
* We no longer have to pass parameters such as --param llvm_site_config=<path>
on the command line.
* It is future-proof, meaning you don't have to edit llvm-lit.in to add
support for new projects.
* All of the duplicated logic of trying various fallback mechanisms of
finding a site config from the main config are now gone.
One potentially noteworthy thing that was required to implement this
change is that whereas the ninja check targets previously used the first
method to spawn lit, they now use the second. In particular, you can no
longer run lit.py against the source tree while specifying the various
`foo_site_config=<path>` parameters. Instead, you need to run
llvm-lit.py.
Differential Revision: https://reviews.llvm.org/D37756
llvm-svn: 313270
Summary:
Change the type of the Redirects parameter of llvm::sys::ExecuteAndWait,
ExecuteNoWait and other APIs that wrap them from `const StringRef **` to
`ArrayRef<Optional<StringRef>>`, which is safer and simplifies the use of these
APIs (no more local StringRef variables just to get a pointer to).
Corresponding clang changes will be posted as a separate patch.
Reviewers: bkramer
Reviewed By: bkramer
Subscribers: vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D37563
llvm-svn: 313155
Summary:
Since asan is linked dynamically on Darwin, the weak interface symbol
is removed by -Wl,-dead_strip.
Reviewers: kcc, compnerd, aaron.ballman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37636
llvm-svn: 312914
Summary:
In D37523 Sanjay pointed out that the tool does not scrub macosx-style 'End of Function' annotations,
where the comments begin with a double-#.
I tested this patch by verifying all existing occurences of 'End function' are scrubbed:
find ./test/CodeGen/X86 -name '*.ll' | xargs grep -l "End function" | xargs utils/update_llc_test_checks.py --llc-binary build/bin/llc
Reviewers: spatel, chandlerc, craig.topper
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37532
llvm-svn: 312678
Summary:
Tablegen already supports commutable instrinsics with more than 2 operands. There it just assumes the first two operands are commutable.
I plan to use this to improve the generation of FMA patterns in the X86 backend.
Reviewers: aymanmus, zvi, RKSimon, spatel, arsenm
Reviewed By: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D37430
llvm-svn: 312464
Use os.path.normpath instead of realpath to collapse '..' and '.' path
components. Use realpath when caching search results about a path for
good measure.
I considered rigging up a test involving symlinks for this, but I doubt
I can check a symlink into SVN. The test would have to conditionally
create a symlink at runtime if the host OS supports it. This sounds too
fragile and complicated to me to be worth it.
llvm-svn: 312254
This preserves symlinks in paths, so that someone can symlink more tests
into a larger test suite. For example, debuginfo-tests is currently
designed to be checked out into clang/test. With this change, it can be
symlinked into place instead, which works better with the monorepo.
llvm-svn: 312250
Summary:
Add support for autocompleting values of -std= by including
LangStandards.def. This patch relies on D36782, and is using two-stage
code generation.
Reviewers: v.g.vassilev, teemperor, ruiu
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D36820
llvm-svn: 311971
This reverts commit 7c46b80c022e18d43c1fdafb117b0c409c5a6d1e.
r311552 broke lld buildbot because I've changed OptionInfos type from
ArrayRef to vector. However the bug is fixed, so I'll commit this again.
llvm-svn: 311958
This fixes 2 problems in subregister hierarchies with multiple levels
and tuples:
1) For bigger tuples computing secondary subregs would miss 2nd order
effects. In the test case a register like `S10_S11_S12_S13_S14` with D5
= S10_S11, D6 = S12_S13 we would correctly compute sub0 = D5, sub1 = D6
but would miss the fact that we could now form ssub0_ssub1_ssub2_ssub3
(aka sub0_sub1) = D5_D6. This is fixed by changing
computeSecondarySubRegs() to compute a fixpoint.
2) Fixing 1) exposed a problem where TableGen would create multiple
names for effectively the same subregister index. In the test case
the subregister index sub0 is composed from ssub0 and ssub1, and sub1 is
composed from ssub2 and ssub3. TableGen should not create both sub0_sub1
and ssub0_ssub1_ssub2_ssub3 as infered subregister indexes. This changes
the code to build a transitive closure of the subregister components
before forming new concatenated subregister indexes.
This fix was developed for an out of tree target. For the in-tree
targets the only change is in the register information computed for ARM.
There is a slight chance this fixed/improved some register coalescing
around the QQQQ/QQ register classes there but I couldn't see/provoke any
code generation differences.
Differential Revision: https://reviews.llvm.org/D36913
llvm-svn: 311914
Adds a new --gen-register-info-debug-dump mode to tablegen that dumps various register related information:
- List of register classes with super and subclasses
- List of subregister indexes with lanemasks
- List of registers with subregisters
I will use this in an upcoming commit to create a test.
It may also be useful for target developers wanting to get an overview
of all the register related information, esp. the things inferred by
tablegen and not directly visible in the .td file.
Differential Revision: https://reviews.llvm.org/D36911
llvm-svn: 311913
Summary:
Previously, the installation path was simply '/'.
Using '/usr/local' would ensure that LLVM installation does not
conflict with software installed via package managers.
Reviewers: mehdi_amini, klimek
Reviewed By: klimek
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37213
llvm-svn: 311890
This fixes a warning when there are zero defined predicates and also fixes an
unnoticed bug where the first predicate in the table was unusable.
llvm-svn: 311684
Summary:
This patch adds support for predicates on imm nodes but only for ImmLeaf and not
for PatLeaf or PatFrag and only where the value does not need to be transformed
before being rendered into the instruction.
The limitation on PatLeaf/PatFrag/SDNodeXForm is due to differences in the
necessary target-supplied C++ for GlobalISel.
Depends on D36085
The previous commit was reverted for breaking the build but this appears to have
been the recurring problem on the Windows bots with tablegen not being re-run
when llvm-tblgen is changed but the .td's aren't. If it re-occurs then forcing a
build with clean=True should fix it but this string should do this in advance:
Requires a clean build.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36086
llvm-svn: 311645
It was marked as unsupported on Windows in r311230 because on some Win10
machines it failed or caused hang. The problem was that on these machines
system bash (C:\Windows\System32\bash.exe) was used which requires paths to be
passed like '/mnt/c/path/to/my/script' instead of 'C:\path\to\my\script'.
TODO: we should make lit detect if system bash is used instead of msys and set
appropriate path format.
llvm-svn: 311558
Summary:
This is a patch for clang autocomplete feature.
It will collect values which -analyzer-checker takes, which is defined in
clang/StaticAnalyzer/Checkers/Checkers.inc, dynamically.
First, from ValuesCode class in Options.td, TableGen will generate C++
code in Options.inc. Options.inc will be included in DriverOptions.cpp, and
calls OptTable's addValues function. addValues function will add second
argument to Option's Values class. Values contains string like "foo,bar,.."
which is handed to Values class
in OptTable.
Reviewers: v.g.vassilev, teemperor, ruiu
Subscribers: hiraditya, cfe-commits
Differential Revision: https://reviews.llvm.org/D36782
llvm-svn: 311552
Summary:
This patch adds support for predicates on imm nodes but only for ImmLeaf and not for PatLeaf or PatFrag and only where the value does not need to be transformed before being rendered into the instruction.
The limitation on PatLeaf/PatFrag/SDNodeXForm is due to differences in the necessary target-supplied C++ for GlobalISel.
Depends on D36085
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36086
llvm-svn: 311546
This is an updated version of https://reviews.llvm.org/D22144 by @jlpeyton.
The patch was accepted but not landed.
This is useful functionality and I would like to use this to enable lit tests for environment variable behaviour.
Differential Revision: https://reviews.llvm.org/D36403
llvm-svn: 311180
Summary:
- Removed --trust-server-cert from `svn checkout` invocations.
Installing 'ca-certificates' package on ubuntu adds required CAs to
the system and svn can do proper checkout using https.
- Added checksum verification when installing cmake from cmake.org.
Reviewers: mehdi_amini, klimek
Reviewed By: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36673
llvm-svn: 311152
Summary:
Generate the type table from the types used by a target rather than hard-coding
the union of types used by all targets.
Depends on D36084
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36085
llvm-svn: 311084
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
The previous commit failed on Windows machines due to a flaw in the sort
predicate which allowed both A < B < C and B == C to be satisfied
simultaneously. The cause of this was some sloppiness in the priority order of
G_CONSTANT instructions compared to other instructions. These had equal priority
because it makes no difference, however there were operands had higher priority
than G_CONSTANT but lower priority than any other instruction. As a result, a
priority order between G_CONSTANT and other instructions must be enforced to
ensure the predicate defines a strict weak order.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 311076
Summary:
We want to catch failures early before do the full 3 stage build.
The goal here is to avoid running through the whole build process and have
it fail at the end (and not create the binary packages), just because
some prerequisites failed to install.
Reviewers: rovka, hans
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36422
llvm-svn: 310939
As expected, this failed on the windows bots but the instrumentation showed
something interesting. The ADD8ri and INC8r rules are never directly compared
on the windows machines. That implies that the issue lies in transitivity of
the Compare predicate. I believe I've already verified that but maybe I missed
something.
llvm-svn: 310922
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
The previous commit failed on the windows bots and this one is likely to fail
on those same bots. However, the added instrumentation should reveal a particular
isHigherPriorityThan() evaluation which I'm expecting to expose that
these machines are weighing priority of two rules differently from the
non-windows machines.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 310919
Two of the Windows bots are failing test\CodeGen\X86\GlobalISel\select-inc.mir
which should not have been affected by the change. Reverting while I investigate.
Also reverted r310735 because it builds on r310716.
llvm-svn: 310745
Summary:
Generate the type table from the types used by a target rather than hard-coding
the union of types used by all targets.
Depends on D36084
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36085
llvm-svn: 310735
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
Depends on D35833
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 310716
Summary:
This patch enables the import of rules containing 'imm' operands that do not
constrain the acceptable values using predicates. Support for ImmLeaf will
arrive in a later patch.
Depends on D35681
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35833
llvm-svn: 310343
Relanding after fixing UB issue with DefaultOffsets.
Consider the following instruction: "inst.eq $dst, $src" where ".eq"
is an optional flag operand. The $src and $dst operands are
registers. If we parse the instruction "inst r0, r1", the flag is not
present and it will be marked in the "OptionalOperandsMask" variable.
After the matching is complete we call the "convertToMCInst" method.
The current implementation works only if the optional operands are at
the end of the array. The "Operands" array looks like [token:"inst",
reg:r0, reg:r1]. The first operand that must be added to the MCInst
is the destination, the r0 register. The "OpIdx" (in the Operands
array) for this register is 2. However, since the flag is not present
in the Operands, the actual index for r0 should be 1. The flag is not
present since we rely on the default value.
This patch removes the "NumDefaults" variable and replaces it with an
array (DefaultsOffset). This array contains an index for each operand
(excluding the mnemonic). At each index, the array contains the
number of optional operands that should be subtracted. For the
previous example, this array looks like this: [0, 1, 1]. When we need
to access the r0 register, we compute its index as 2 -
DefaultsOffset[1] = 1.
Patch by Alexandru Guduleasa!
Reviewers: SamWot, nhaustov, niravd
Reviewed By: niravd
Subscribers: vitalybuka, llvm-commits
Differential Revision: https://reviews.llvm.org/D35998
llvm-svn: 310254
Multi-configuration CMake generators such as those for Visual Studio or Xcode do not
specify a build config at configure time, but let the user choose at build
time. In these cases binaries go into build/${Configuration}/bin rather than
build/bin. Prior to this commit, check-lit would fail when using multi-configuration
generators as it did not know how to resolve ${Configuration} in order
to find tools such as FileCheck. This commit teaches it to resolve
llvm_tools_dir within lit using the value specified with --param
build_mode.
Differential Revision: https://reviews.llvm.org/D36263
llvm-svn: 309967
Consider the following instruction: "inst.eq $dst, $src" where ".eq"
is an optional flag operand. The $src and $dst operands are
registers. If we parse the instruction "inst r0, r1", the flag is not
present and it will be marked in the "OptionalOperandsMask" variable.
After the matching is complete we call the "convertToMCInst" method.
The current implementation works only if the optional operands are at
the end of the array. The "Operands" array looks like [token:"inst",
reg:r0, reg:r1]. The first operand that must be added to the MCInst
is the destination, the r0 register. The "OpIdx" (in the Operands
array) for this register is 2. However, since the flag is not present
in the Operands, the actual index for r0 should be 1. The flag is not
present since we rely on the default value.
This patch removes the "NumDefaults" variable and replaces it with an
array (DefaultsOffset). This array contains an index for each operand
(excluding the mnemonic). At each index, the array contains the
number of optional operands that should be subtracted. For the
previous example, this array looks like this: [0, 1, 1]. When we need
to access the r0 register, we compute its index as 2 -
DefaultsOffset[1] = 1.
Patch by Alexandru Guduleasa!
Reviewers: SamWot, nhaustov, niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35998
llvm-svn: 309949
Summary:
We only need to merge memory operands for instructions that access
memory. This slightly reduces the number of actions executed.
Reviewers: MatzeB, rovka, dsanders
Reviewed By: dsanders
Subscribers: aemerson, igorb, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D36151
llvm-svn: 309944
Summary:
Fix a bug discovered in an out-of-tree target where memoperands from
pseudo-instructions that weren't part of the match were being merged into the
result instructions as part of GIR_MergeMemOperands.
This bug was caused by a change to the handling of State.MIs between rules when
the state machine tables were fused into a single table. Previously, each rule
would reset State.MIs using State.MIs.resize(1) but this is no longer done, as a
result stale data is occasionally left in some elements of State.MIs. Most
opcodes aren't affected by this but GIR_MergeMemOperands merges all memoperands
from the intructions recorded in State.MIs into the result instruction.
Suppose for example, we processed but rejected the following pattern:
(signextend (load x))
at this point, State.MIs contains the signextend and the load. Now suppose we
process and accept this pattern:
(add x, y)
at this point, State.MIs contains the add as well as the (now irrelevant) load.
When GIR_MergeMemOperands is processed, the memoperands from that irrelevant
load will be merged into the result instruction even though it was not part of
the match.
Bringing back the State.MIs.resize(1) would fix the problem but it would limit
our ability to optimize the table in the future. Instead, this patch fixes the
problem by explicitly stating which instructions should be merged into the result.
There's no direct test case in this commit because a test case would be very brittle.
However, at the time of writing this should fix the failures in
http://green.lab.llvm.org/green/job/Compiler_Verifiers_GlobalISEL/ as well as a
failure in test/CodeGen/ARM/GlobalISel/arm-isel.ll when expensive checks are enabled.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: fhahn, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36094
llvm-svn: 309804
Summary:
This is an alternative solution to running the lit test suite on bots
without polluting the source directory. Each input test suite gets an
auto-generated site config in the build directory that points back to
the test input source directory.
This adds some cmake comlexity, but now we don't need to remove and
re-copy the test input directory before every test.
Reviewers: delcypher, modocache
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D36026
llvm-svn: 309602
Summary:
When outputing usage, emit here-document directly instead of
saving in a variable first -- avoids problem with bash 3.2.57 where an
unmatched ' in the here-document results in the following error:
./build_docker_image.sh: line 135: unexpected EOF while looking for matching `''
bash --version
GNU bash, version 3.2.57(1)-release (x86_64-apple-darwin16)
Differential Revision: https://reviews.llvm.org/D36064
llvm-svn: 309568
Traceback (most recent call last):
File "llvm/utils/lit/tests/Inputs/shtest-format/external_shell/write-bad-encoding.py", line 5, in <module>
sys.stdout.write(b"a line with bad encoding: \xc2.")
sys.stdout.write doesn't accept bytes but sys.stdout.buffer.write accepts.
llvm-svn: 309473
When I tried running the script, the ARM regex parser could not parse
my code. It failed because the .Lfunc_end line has a comment at the
end of it, so this commit removes the newline at the end of the regex.
Patch by Joel Galenson!
Differential Revision: https://reviews.llvm.org/D35641
llvm-svn: 309457
This should fix googletest-format test failures on the clang modules
buildbots, which have a stale copy of the OneTest script in the build
directory.
llvm-svn: 309432
When using win32 cmd.exe, turn off command echoing at the beginning of
the script (@echo off).
Replace a bash shell script with a python script for the
fail_with_bad_encoding test.
llvm-svn: 309399
Summary:
The technique of directly calling subprocess.Popen on a python script
doesn't work on Windows. The executable path of the command must refer
to a valid win32 executable.
Instead, rename all the python scripts masquerading as gtest executables
to have .py extensions, so we can easily detect then and call the python
executable for them. Do this on Linux as well as Windows for
consistency.
The test suite directory names also come out in lower-case on Windows.
We can consider removing that in a later patch. This change just updates
the FileCheck lines to match on Windows.
Fixes PR33933
Reviewers: modocache, mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35909
llvm-svn: 309347
Summary:
Normally Python converts all newline characters, Windows or Unix,
to Unix newlines when opening a file. However, lit opens files in
binary mode, which does not perform this conversion. As a result,
trailing Windows newlines are not stripped from test input, which
caused a failure in the TestRunner unit test:
```
FAIL: test_custom (__main__.TestIntegratedTestKeywordParser)
----------------------------------------------------------------------
Traceback (most recent call last):
File "C:\Users\bgesiak\src\llvm\llvm\utils\lit\tests\unit\TestRunner.py", line 109, in test_custom
self.assertItemsEqual(value, ['a', 'b', 'c'])
AssertionError: Element counts were not equal:
First has 1, Second has 0: 'c\r'
First has 0, Second has 1: 'c'
```
Fix the discrepancy in behavior across the two platforms by
manually stripping Windows newlines before yielding each line in
the test file.
Reviewers: echristo, beanz, ddunbar, delcypher, rnk
Reviewed By: rnk
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D27746
llvm-svn: 309312
Summary:
Depends on https://reviews.llvm.org/D35879.
This reverts rL257268, which in turn was a revert of rL257221.
https://reviews.llvm.org/D35879 marks the tests in the lit test suite
that fail on Windows as XFAIL, which should allow these tests to pass
on Windows-based buildbots.
Reviewers: delcypher, beanz, mgorny, jroelofs, rnk
Reviewed By: mgorny
Subscribers: rnk, ddunbar, george.karpenkov, llvm-commits
Differential Revision: https://reviews.llvm.org/D35880
llvm-svn: 309310
Summary:
An expectation in `utils/lit/tests/Inputs/shtest-shell/redirects.txt`
expects that first a string printed to stdout is seen, and then a
string printed to stderr. Add `flush()` calls to ensure that stdout is
printed before stderr, as expected.
Reviewers: rnk, mgorny, jroelofs
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35947
llvm-svn: 309292
Summary:
Now that we have control flow in place, fuse the per-rule tables into a
single table. This is a compile-time saving at this point. However, this will
also enable the optimization of a table so that similar instructions can be
tested together, reducing the time spent on the matching the code.
This is NFC in terms of externally visible behaviour but some internals have
changed slightly. State.MIs is no longer reset between each rule that is
attempted because it's not necessary to do so. As a consequence of this the
restriction on the order that instructions are added to State.MIs has been
relaxed to only affect recorded instructions that require new elements to be
added to the vector. GIM_RecordInsn can now write to any element from 1 to
State.MIs.size() instead of just State.MIs.size().
The compile-time regressions from the last commit were caused by the ARM target
including a non-const variable (zero_reg) in the table and therefore generating
an initializer for it. That variable is now const.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35681
llvm-svn: 309264
Rewrite the write-to-stderr.sh and write-to-stdout-and-stderr.sh shell
scripts as python scripts and call python on them.
Fixes PR33940
llvm-svn: 309200
This passes locally for me, which fails the overall lit test suite. I
can't debug a passing test, but I will try to help debug the test when
we get some failing logs.
llvm-svn: 309190
Summary:
rL257221 attempted to run lit's own test suite continuously, but that
commit was reverted because lit's test suite does not pass on Windows.
Because lit's tests do not run continuously, they often regress.
In order to un-revert rL257221, mark lit tests that fail as XFAIL for
Windows platforms.
Test Plan:
On a Windows development environment, follow the instructions in
utils/lit/README.txt to run lit's test suite:
```
utils/lit/lit.py \
--path /path/to/your/llvm/build/bin \
utils/lit/tests
```
Verify that the test suite is run and a successful exit code is
returned.
Reviewers: mgorny, rnk, delcypher, beanz
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35879
llvm-svn: 309123
Summary:
Whereas rL299560 and rL309071 call `parallelism_groups.items()`, under the
assumption that `parallelism_groups` is a `dict` type, the default
parameter for that attribute is a `list`. Change the default to a
`dict` for type correctness.
This regression in the unit tests would have been caught if the
unit tests were being run continously. It also would have been caught
if the lit project used a Python type checker such as `mypy`.
Test Plan:
As per the instructions in `utils/lit/README.txt`, run the lit unit
test suite:
```
utils/lit/lit.py \
--path /path/to/your/llvm/build/bin \
utils/lit/tests
```
Verify that the test `lit :: unit/TestRunner.py` fails before applying this
patch, but passes once this patch is applied.
Reviewers: mgorny, rnk, rafael
Reviewed By: mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35878
llvm-svn: 309122
Summary:
This reverts rL306623, which removed `FileBasedTest`, an abstract base class,
but did not also remove the usages of that class in the lit unit tests.
The revert fixes four test failures in the lit unit test suite.
Test plan:
As per the instructions in `utils/lit/README.txt`, run the lit unit
test suite:
```
utils/lit/lit.py \
--path /path/to/your/llvm/build/bin \
utils/lit/tests
```
Verify that the following tests fail before applying this patch, and
pass once the patch is applied:
```
lit :: test-data.py
lit :: test-output.py
lit :: xunit-output.py
```
In addition, run `check-llvm` to make sure the existing LLVM test suite
executes normally.
Reviewers: george.karpenkov, mgorny, dlj
Reviewed By: mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35877
llvm-svn: 309120
The ARM bots have started failing and while this patch should be an improvement
for these bots, it's also the only suspect in the blamelist. Reverting while
Diana and I investigate the problem.
llvm-svn: 309111
Summary:
Now that we have control flow in place, fuse the per-rule tables into a
single table. This is a compile-time saving at this point. However, this will
also enable the optimization of a table so that similar instructions can be
tested together, reducing the time spent on the matching the code.
This is NFC in terms of externally visible behaviour but some internals have
changed slightly. State.MIs is no longer reset between each rule that is
attempted because it's not necessary to do so. As a consequence of this the
restriction on the order that instructions are added to State.MIs has been
relaxed to only affect recorded instructions that require new elements to be
added to the vector. GIM_RecordInsn can now write to any element from 1 to
State.MIs.size() instead of just State.MIs.size().
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35681
llvm-svn: 309094
Replace the incorrect variable reference when invalid redirect is used.
This fixes the following issue:
File "/usr/src/llvm/utils/lit/lit/TestRunner.py", line 316, in processRedirects
raise InternalShellError(cmd, "Unsupported redirect: %r" % (r,))
UnboundLocalError: local variable 'r' referenced before assignment
which in turn broke shtest-shell.py and max-failures.py lit tests.
The breakage was introduced during refactoring in rL307310.
Differential Revision: https://reviews.llvm.org/D35857
llvm-svn: 309044
Summary:
scudo_utils.cpp.o from compiler-rt has one of the host compiler's builtin
include paths stored in the .debug_line section. So we need to do
sed 's,Phase1,Phase2,g` on the Phase2 object file so it matches Phase3.
Reviewers: hans
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34989
llvm-svn: 308912
Summary:
This will allow us to merge the various sub-tables into a single table. This is a
compile-time saving at this point. However, this will also enable the optimization
of a table so that similar instructions can be tested together, reducing the time
spent on the matching the code.
The bulk of this patch is a mechanical conversion to the new MatchTable object
which is responsible for tracking label definitions and filling in the index of
the jump targets. It is also responsible for nicely formatting the table.
This was necessary to support the new GIM_Try opcode which takes the index to
jump to if the match should fail. This value is unknown during table
construction and is filled in during emission. To support nesting try-blocks
(although we currently don't emit tables with nested try-blocks), GIM_Reject
has been re-introduced to explicitly exit a try-block or fail the overall match
if there are no active try-blocks.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35117
llvm-svn: 308596
Rename the enum value from X86_64_Win64 to plain Win64.
The symbol exposed in the textual IR is changed from 'x86_64_win64cc'
to 'win64cc', but the numeric value is kept, keeping support for
old bitcode.
Differential Revision: https://reviews.llvm.org/D34474
llvm-svn: 308208
One place compared with 32, which I've replaced with LaneBitmask::BitWidth.
The other places are shifts of a constant 1 by a lane number. But if LaneBitmask were to be a larger type than 32-bits like 64-bits, the 1 would need to be 1ULL to do a 64-bit shift. To hide this I've added a LanebitMask::getLane that hides the shift and make sures the 1 is casted to correct type first.
llvm-svn: 308042
Debugging LIT scripts can be rather painful, as LIT directly does not
specify which line has failed.
Rather, FileCheck is expected to report the failing location, but it can
be often ambiguous if multiple commands are tested against the same
prefix. This change adds a -vv option, which echoes all output.
Then detecting the error becomes straightforward: last printed line is
the failing one.
Of course, it could be desired to try to get failing line number
directly from bash, but it involves excessive hacks on older bash
versions (cf.
https://stackoverflow.com/questions/24398691/how-to-get-the-real-line-number-of-a-failing-bash-command)
Differential Revision: https://reviews.llvm.org/D35330
llvm-svn: 307938
Summary:
This speeds up the LLD test suite on Windows by 3x. Most of the time is
spent on lld/test/ELF/linkerscript/diagnostics.s, which repeatedly
constructs linker scripts with appending echo commands.
Reviewers: dlj, zturner, modocache
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35093
llvm-svn: 307668
In each rule, each use of ComplexPattern is assigned an element in the Renderers
array. The matcher then collects renderer functions in this array and they are
used to render instructions. This works well for a single instruction but a
bug in the allocation mechanism causes the elements to be assigned on a
per-instruction basis rather than a per-rule basis.
So in the case of:
(set GPR32:$dst, (Op complex:$src1, complex:$src2))
tablegen currently assigns elements 0 and 1 to $src1 and $src2 respectively,
but for:
(set GPR32:$dst, (Op complex:$src1, (Op complex:$src2)))
it currently assigned both $src1 and $src2 the same element (0). This results in
one complex operand being rendered twice and the other being forgotten.
This patch corrects the allocation such that $src1 and $src2 are still allocated
different elements in this case.
llvm-svn: 307646
TreePatternNode considers them to be plain integers but MachineInstr considers
them to be a distinct kind of operand.
The tweak to AArch64InstrInfo.td to produce a simple test case is a NFC for
everything except GlobalISelEmitter (confirmed by diffing the tablegenerated
files). GlobalISelEmitter is currently unable to infer the type of operands in
the Dst pattern from the operands in the Src pattern.
llvm-svn: 307634
Some of our emitters were using the name of the Target to reference things that were created by others emitters using Namespace.
Apparently all targets have the same Target name as their instruction and register Namespace field?
Someone on IRC had a target that didn't do this and was getting build errors. This patch is a necessary, but maybe not sufficient fix.
llvm-svn: 307358
This is especially useful when lit is invoked indirectly by the build
system, and additional arguments can not be easily specified.
Differential Revision: https://reviews.llvm.org/D35091
llvm-svn: 307339
We weren't installing opt-viewer and co before, this fixes the omission. I am
also moving the tools from utils/ to tools/. I believe that this is more
appropriate since these tools have matured greatly in the past year through
contributions by multiple people (thanks!) so they are ready to become
external tools.
The tools are installed under <install>/share/opt-viewer/.
I am *not* adding the llvm- prefix. If people feel strongly about adding
that, this is probably a good time since the new location will require some
mental adjustment anyway.
Fixes PR33521
Differential Revision: https://reviews.llvm.org/D35048
llvm-svn: 307285
- Put buildfiles into /tmp/clang-build/build, instead of /tmp/clang-build.
We checkout the sources to /tmp/clang-build/src and running
cmake in /tmp/clang-build was done by mistake.
- Don't add an extra ';' at the start of enabled projects list.
It worked either way, but looked strange.
- Minor comment update.
llvm-svn: 307258
Summary:
- Removed double indirection via command-line args (i.e. two `--`
options of `build_docker_image.sh`).
- Added a comment on how to build 2-stage clang install into the
`build_docker_image.sh`, it used to be only in the `docs/Docker.rst`.
Reviewers: klimek, mehdi_amini
Reviewed By: klimek
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35050
llvm-svn: 307256
The conversion to MatchTable left the function names and comments referring to
C++ statements and expressions. Updated the names and comments to account for
the fact that they're no longer unconstrained statements/expressions.
llvm-svn: 307248
The conversion to MatchTable left the function names and comments referring to
C++ statements and expressions. Updated the names and comments to account for
the fact that they're no longer unconstrained statements/expressions.
llvm-svn: 307246
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
llvm-svn: 307240
Fix by Andrew Ng!
The Visual Studio build can contain output for multiple configuration types (
e.g. Debug, Release & RelWithDebInfo) within the same build output
directory. Therefore when discovering unit tests, the "build mode" sub directory
containing the appropriate configuration is included in the search. This sub
directory may not always be present, so a test for its existence is required.
Reviewers: zturner, modocache, dlj
Reviewed By: zturner, dlj
Subscribers: grimar, bd1976llvm, gbreynoo, edd, jhenderson, llvm-commits
Differential Revision: https://reviews.llvm.org/D34976
llvm-svn: 307235
If a method / function returns a StringRef but the
variable is of type const std::string& a temporary string is
created (StringRef has a cast operator to std::string),
which is a suboptimal behavior.
Differential revision: https://reviews.llvm.org/D34994
Test plan: make check-all
llvm-svn: 307195
Summary:
Also, made a few minor tweaks to shave off a little more cumulative memory consumption:
* All rules share a single NewMIs instead of constructing their own. Only one
will end up using it.
* Use MIs.resize(1) instead of MIs.clear();MIs.push_back(I) and prevent
GIM_RecordInsn from changing MIs[0].
Depends on D33764
Reviewers: rovka, vitalybuka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D33766
llvm-svn: 307159
This implements suggesting other mnemonics when an invalid one is specified,
for example:
$ echo "adXd r1,r2,#3" | llvm-mc -triple arm
<stdin>:1:1: error: invalid instruction, did you mean: add, qadd?
adXd r1,r2,#3
^
The implementation is target agnostic, but as a first step I have added it only
to the ARM backend; so the ARM backend is a good example if someone wants to
enable this too for another target.
Differential Revision: https://reviews.llvm.org/D33128
llvm-svn: 307148
r307133 brought back a couple instances of the same mistake that was already
fixed by r307088. Fixed it again.
Using NumPatternEmitted as a unique id for the tables is not valid on release
builds since the counters don't count in that case.
llvm-svn: 307146
Summary:
This further improves the compile-time regressions that will be caused by a
re-commit of r303259.
Also added included preliminary work in preparation for the multi-insn emitter
since I needed to change the relevant part of the API for this patch anyway.
Depends on D33758
Reviewers: rovka, vitalybuka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D33764
llvm-svn: 307133
Using NumPatternEmitted as a unique id for the tables is not valid on release
builds since the counters don't count in that case.
Also fix an unused variable warning.
llvm-svn: 307088
Summary:
Replace the matcher if-statements for each rule with a state-machine. This
significantly reduces compile time, memory allocations, and cumulative memory
allocation when compiling AArch64InstructionSelector.cpp.o after r303259 is
recommitted.
The following patches will expand on this further to fully fix the regressions.
Reviewers: rovka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: vitalybuka, aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D33758
llvm-svn: 307079
Record::getValues returns ArrayRef which has a cast operator
to std::vector, as a result a temporary vector is created
if the type of the variable is const std::vector&
that is suboptimal in this case.
Differential revision: https://reviews.llvm.org/D34969
Test plan: make check-all
llvm-svn: 307063
Summary:
The lit test formats use largely the same logic for discovering tests. There are
some superficial differences in the logic, which seem reasonable enough to
handle in a single routine.
At a high level, the common goal is "look for files that end with one of these
suffixes, and skip anything starting with a dot." The balance of the logic
specific to ShTest and GoogleTest collapses quite a bit, so that
getTestsInDirectory is only a couple of lines around a call to the new function.
Reviewers: zturner, MatzeB, modocache
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D34855
llvm-svn: 306895
This reverts commit da6318a92fba793e4f2447ec478b001392d57d43.
This is causing failures on some build bots due to what appears
to be some kind of lit ordering dependency.
llvm-svn: 306833
Presently lit leaks files in the tests' output directories.
Specifically, if a test creates output files, lit makes no
effort to remove them prior to the next test run. This is
problematic because it leads to false positives whenever a
test passes because stale files were present. In general
it is a source of flakiness that should be removed.
This patch addresses this by building the list of all test
directories that are part of the current run set, and then
deleting those directories and recreating them anew. This
gives each test a clean baseline to start from.
Differential Revision: https://reviews.llvm.org/D34732
llvm-svn: 306832
The style guide states that the explicit `inline`
should not be used with inline methods. classof is
very common inline method with a fair amount on
inconsistency:
$ git grep classof ./include | grep inline | wc -l
230
$ git grep classof ./include | grep -v inline | wc -l
257
I chose to target this method rather the larger change
since this method is easily cargo-culted (I did it at
least once). I considered doing the larger change and
removing all occurrences but that would be a much larger
change.
Differential Revision: https://reviews.llvm.org/D33906
llvm-svn: 306731
Daniel Sanders