We currently use target_link_libraries without an explicit scope
specifier (INTERFACE, PRIVATE or PUBLIC) when linking executables.
Dependencies added in this way apply to both the target and its
dependencies, i.e. they become part of the executable's link interface
and are transitive.
Transitive dependencies generally don't make sense for executables,
since you wouldn't normally be linking against an executable. This also
causes issues for generating install export files when using
LLVM_DISTRIBUTION_COMPONENTS. For example, clang has a lot of LLVM
library dependencies, which are currently added as interface
dependencies. If clang is in the distribution components but the LLVM
libraries it depends on aren't (which is a perfectly legitimate use case
if the LLVM libraries are being built static and there are therefore no
run-time dependencies on them), CMake will complain about the LLVM
libraries not being in export set when attempting to generate the
install export file for clang. This is reasonable behavior on CMake's
part, and the right thing is for LLVM's build system to explicitly use
PRIVATE dependencies for executables.
Unfortunately, CMake doesn't allow you to mix and match the keyword and
non-keyword target_link_libraries signatures for a single target; i.e.,
if a single call to target_link_libraries for a particular target uses
one of the INTERFACE, PRIVATE, or PUBLIC keywords, all other calls must
also be updated to use those keywords. This means we must do this change
in a single shot. I also fully expect to have missed some instances; I
tested by enabling all the projects in the monorepo (except dragonegg),
and configuring both with and without shared libraries, on both Darwin
and Linux, but I'm planning to rely on the buildbots for other
configurations (since it should be pretty easy to fix those).
Even after this change, we still have a lot of target_link_libraries
calls that don't specify a scope keyword, mostly for shared libraries.
I'm thinking about addressing those in a follow-up, but that's a
separate change IMO.
Differential Revision: https://reviews.llvm.org/D40823
llvm-svn: 319840
Summary:
This makes it very easy to test files that only differ in a constant
value somewhere in the test case.
Reviewers: jlebar, hfinkel, chandlerc, probinson
Reviewed By: probinson
Subscribers: probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D39629
llvm-svn: 317572
If there's enough data in fron of it the skipped region would just
become arbitrarily large, and we scan for the CHECK-NOT everywhere.
llvm-svn: 304900
If `--enable-var-scope` is in effect, variables with names that
start with `$` are considered to be global. All other variables are
local. All local variables get undefined at the beginning of each
CHECK-LABEL block. Global variables are not affected by CHECK-LABEL.
This makes it easier to ensure that individual tests are not affected
by variables set in preceding tests.
Differential Revision: https://reviews.llvm.org/D30749
llvm-svn: 297396
Make sure FileCheck --strict-whitespace --match-full-lines translates
'CHECK: bla ' into pattern '^ bla $' instead of pattern '^bla$'.
llvm-svn: 290069
The comment in ReadCheckFile claims that both leading and trailing whitespace
are removed, but the associated statement only removes leading whitespace.
llvm-svn: 290061
check file to not be unreasonably slow in the face of multiple check
prefixes.
The previous logic would repeatedly scan potentially large portions of
the check file looking for alternative prefixes. In the worst case this
would scan most of the file looking for a rare prefix between every
single occurance of a common prefix. Even if we bounded the scan, this
would do bad things if the order of the prefixes was "unlucky" and the
distant prefix was scanned for first.
None of this is necessary. It is straightforward to build a state
machine that recognizes the first, longest of the set of alternative
prefixes. That is in fact exactly whan a regular expression does.
This patch builds a regular expression once for the set of prefixes and
then uses it to search incrementally for the next prefix. This requires
some threading of state but actually makes the code dramatically
simpler. I've also added a big comment describing the algorithm as it
was not at all obvious to me when I started.
With this patch, several previously pathological test cases in
test/CodeGen/X86 are 5x and more faster. Overall, running all tests
under test/CodeGen/X86 uses 10% less CPU after this, and because all the
slowest tests were hitting this, finishes in 40% less wall time on my
system (going from just over 5.38s to just over 3.23s) on a release
build! This patch substantially improves the time of all 7 X86 tests
that were in the top 20 reported by --time-tests, 5 of them are
completely off the list and the remaining 2 are much lower. (Sadly, the
new tests on the list include 2 new X86 ones that are slow for unrelated
reasons, so the count stays at 4 of the top 20.)
It isn't clear how much this helps debug builds in aggregate in part
because of the noise, but it again makes mane of the slowest x86 tests
significantly faster (10% or more improvement).
llvm-svn: 289382
This fixes one formatting goof I left in my previous commit and *many*
other inconsistencies.
I'm planning to make substantial changes here and so wanted to get to
a clean baseline.
llvm-svn: 289379
make some readability improvements.
Both the check file and input file have to be fully buffered to
normalize their whitespace. But previously this would be done in a stack
SmallString and then copied into a heap allocated MemoryBuffer. That
seems pretty wasteful, especially for something like FileCheck where
there are only ever two such entities.
This just rearranges the code so that we can keep the canonicalized
buffers on the stack of the main function, use reasonably large stack
buffers to reduce allocation. A rough estimate seems to show that about
80% of LLVM's .ll and .s files will fit into a 4k buffer, so this should
completely avoid heap allocation for the buffer in those cases. My
system's malloc is fast enough that the allocations don't directly show
up in timings. However, on some very slow test cases, this saves 1% - 2%
by avoiding the copy into the heap allocated buffer.
This also splits out the code which checks the input into a helper much
like the code to build the checks as that made the code much more
readable to me. Nit picks and suggestions welcome here. It has really
exposed a *bunch* of stuff that could be cleaned up though, so I'm
probably going to go and spring clean all of this code as I have more
changes coming to speed things up.
llvm-svn: 289378
1. Add the "explicit" specifier to the single-argument constructor of Pattern
2. Reorder the fields to remove excessive padding (8 bytes).
Patch by Alexander Shaposhnikov!
llvm-svn: 279832
Summary:
This new alias takes a comma separated list of prefixes which allows
'--check-prefix=A --check-prefix=B --check-prefix=C' to be written as
'--check-prefixes=A,B,C'.
Reviewers: probinson
Subscribers: probinson, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D21293
llvm-svn: 272670
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
Combinations of suffixes that look useful are actually ignored;
complaining about them will avoid mistakes.
Differential Revision: http://reviews.llvm.org/D17587
llvm-svn: 262263
Combinations of suffixes that look useful actually are ignored;
complaining about them will avoid mistakes.
Differential Revision: http://reviews.llvm.org/D17587
llvm-svn: 262092
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238602
Add `CHECK-SAME`, which requires that the pattern matches on the *same*
line as the previous `CHECK`/`CHECK-NEXT` -- in other words, no newline
is allowed in the skipped region. This is similar to `CHECK-NEXT`,
which requires exactly 1 newline in the skipped region.
My motivation is to simplify checking the long lines of LLVM assembly
for the new debug info hierarchy. This allows CHECK sequences like the
following:
CHECK: ![[REF]] = !SomeMDNode(
CHECK-SAME: file: ![[FILE:[0-9]+]]
CHECK-SAME: otherField: 93{{[,)]}}
which is equivalent to:
CHECK: ![[REF]] = !SomeMDNode({{.*}}file: ![[FILE:[0-9]+]]{{.*}}otherField: 93{{[,)]}}
While this example just has two fields, many nodes in debug info have
more than that. `CHECK-SAME` will keep the logic easy to follow.
Morever, it enables interleaving `CHECK-NOT`s without allowing newlines.
Consider the following:
CHECK: ![[REF]] = !SomeMDNode(
CHECK-SAME: file: ![[FILE:[0-9]+]]
CHECK-NOT: unexpectedField:
CHECK-SAME: otherField: 93{{[,)]}}
CHECK-NOT: otherUnexpectedField:
CHECK-SAME: )
which doesn't seem to have an equivalent `CHECK` line.
llvm-svn: 230612
StringSet is still a bit dodgy in that it exposes the raw iterator of
the StringMap parent, which exposes the weird detail that StringSet
actually has a 'value'... but anyway, this is useful for a handful of
clients that want to reference the newly inserted/persistent string data
in the StringSet/Map/Entry/thing.
llvm-svn: 222302
Currently FileCheck errors out on empty input. This is usually the
right thing to do, but makes testing things like "this command does
not emit some error message" hard to test. This usually leads to
people using "command 2>&1 | count 0" instead, and then the bots that
use guard malloc fail a few hours later.
By adding a flag to FileCheck that allows empty inputs, we can make
tests that consist entirely of "CHECK-NOT" lines feasible.
llvm-svn: 215127
Summary:
Add FileCheck -implicit-check-not option which allows specifying a
pattern that should only occur in the input when explicitly matched by a
positive check. This feature allows checking tool diagnostics in a way
clang -verify does it for compiler diagnostics.
The option has been tested on a number of clang-tidy checks, I'll post a link to
the clang-tidy patch to this thread.
Once there's an agreement on the general direction, I can add tests and
documentation.
Reviewers: djasper, bkramer
Reviewed By: bkramer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4462
llvm-svn: 212810
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
llvm-svn: 211749
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
llvm-svn: 203083
Since r197684, "install/bin/llvm-config --obj-root" hasn't shown the build tree. The builder was finding utils in the build tree, from the installed tree.
I will revert this after dragonegg builder would be tweaked not to use installed llvm-config.
llvm-svn: 197786
Shoaib Meenai