This in turn triggered some fallout where other files had
been transitively picking up includes that they needed from
FileSpec.h, so I've fixed those up as well.
llvm-svn: 296855
Some Polly ACC test cases fail without a working NVPTX backend. We explicitly
specify this dependence in REQUIRES. Alternatively, we could have only marked
polly-acc as supported in case the NVPTX backend is available, but as we might
use other backends in the future, this does not seem to be the best choice.
For this to work, we also need to make the 'targets_to_build' information
available.
Suggested-by: Michael Kruse <llvm@meinersbur.de>
llvm-svn: 296853
A call should never modify the stack pointer, but some backends are
not so sure about this and never list SP in the regmask. For the
purposes of LiveDebugValues we assume a call never clobbers SP. We
already have a similar workaround in DbgValueHistoryCalculator (which
we hopefully can retire soon).
This fixes the availabilty of local ASANified variables on AArch64.
rdar://problem/27757381
llvm-svn: 296847
For chains of triangles with small join blocks that can be tail duplicated, a
simple calculation of probabilities is insufficient. Tail duplication
can be profitable in 3 different ways for these cases:
1) The post-dominators marked 50% are actually taken 56% (This shrinks with
longer chains)
2) The chains are statically correlated. Branch probabilities have a very
U-shaped distribution.
[http://nrs.harvard.edu/urn-3:HUL.InstRepos:24015805]
If the branches in a chain are likely to be from the same side of the
distribution as their predecessor, but are independent at runtime, this
transformation is profitable. (Because the cost of being wrong is a small
fixed cost, unlike the standard triangle layout where the cost of being
wrong scales with the # of triangles.)
3) The chains are dynamically correlated. If the probability that a previous
branch was taken positively influences whether the next branch will be
taken
We believe that 2 and 3 are common enough to justify the small margin in 1.
The code pre-scans a function's CFG to identify this pattern and marks the edges
so that the standard layout algorithm can use the computed results.
llvm-svn: 296845
Previously, VC++ has always set _MSC_VER to a four-digit value with the two least significant digits set to zero. Visual Studio 2017, however, sets _MSC_VER=1910, and we expect to update the least significant digit as we release major updates for VS 2017. This patch fixes the msc-version.c test to handle non-zero values in the two least significant digits of _MSC_VER.
llvm-svn: 296843
Such edges may otherwise result in infinite recursion if a pointer to a vtable
is reachable from the vtable itself. This can happen in practice if a TU
defines the ABI types used to implement RTTI, and is itself compiled with RTTI.
Fixes PR32121.
llvm-svn: 296839
ValueTracking is used for more thorough analysis of operands. Based on the
analysis, either run-time checks can be simplified (e.g. check only one operand
instead of two) or the transformation can be avoided. For example, it is quite
often the case that a divisor is promoted from a shorter type and run-time
checks for it are redundant.
With additional compile-time analysis of values, two special cases naturally
arise and are addressed by the patch:
1) Both operands are known to be short enough. Then, the long division can be
simply replaced with a short one without CFG modification.
2) If a division is unsigned and the dividend is known to be short then the
long division is not needed at all. Because if the divisor is too big for
short division then the quotient is obviously zero (and the remainder is
equal to the dividend). Actually, the division is not needed when
(divisor > dividend).
Differential Revision: https://reviews.llvm.org/D29897
llvm-svn: 296832
Summary:
Fix a few problems in VersionFromVCS.cmake to make it more reliable:
- Stop using git svn info to retrieve the svn revision. I am unable to
determine what the svn revision returned by this command means.
During my testing this command returned a revision from a month
ago which was not the HEAD of any of my local branches.
Also, this revision was never actually added to the version string due
to a typo in the script. All it was used for was to reject the
revision number returned by git svn find-rev HEAD when the revision
numbers didn't match.
- Populate GIT_COMMIT even when we detect a git repo without any
svn information.
Reviewers: mehdi_amini, beanz
Reviewed By: beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D30092
llvm-svn: 296829
The most important goal of the patch is to break large insertFastDiv function
into separate pieces, so that later a different fast insertion logic can be
implemented using some of these pieces.
Differential Revision: https://reviews.llvm.org/D29896
llvm-svn: 296828
Summary:
Currently, when 't1: i1 = setcc t2, t3, cc' followed by 't4: i1 = xor t1, Constant:i1<-1>' is folded into 't5: i1 = setcc t2, t3 !cc', SDLoc of newly created SDValue 't5' follows SDLoc of 't4', not 't1'. However, as the opcode of newly created SDValue is 'setcc', it make more sense to take DebugLoc from 't1' than 't4'. For the code below
```
extern int bar();
extern int baz();
int foo(int x, int y) {
if (x != y)
return bar();
else
return baz();
}
```
, following is the bitcode representation of 'foo' at the end of llvm-ir level optimization:
```
define i32 @foo(i32 %x, i32 %y) !dbg !4 {
entry:
tail call void @llvm.dbg.value(metadata i32 %x, i64 0, metadata !9, metadata !11), !dbg !12
tail call void @llvm.dbg.value(metadata i32 %y, i64 0, metadata !10, metadata !11), !dbg !13
%cmp = icmp ne i32 %x, %y, !dbg !14
br i1 %cmp, label %if.then, label %if.else, !dbg !16
if.then: ; preds = %entry
%call = tail call i32 (...) @bar() #3, !dbg !17
br label %return, !dbg !18
if.else: ; preds = %entry
%call1 = tail call i32 (...) @baz() #3, !dbg !19
br label %return, !dbg !20
return: ; preds = %if.else, %if.then
%retval.0 = phi i32 [ %call, %if.then ], [ %call1, %if.else ]
ret i32 %retval.0, !dbg !21
}
!14 = !DILocation(line: 5, column: 9, scope: !15)
!16 = !DILocation(line: 5, column: 7, scope: !4)
```
As you can see, in 'entry' block, 'icmp' instruction and 'br' instruction have different debug locations. However, with current implementation, there's no distinction between debug locations of these two when they are lowered to asm instructions. This is because 'icmp' and 'br' become 'setcc' 'xor' and 'brcond' in SelectionDAG, where SDLoc of 'setcc' follows the debug location of 'icmp' but SDLOC of 'xor' and 'brcond' follows the debug location of 'br' instruction, and SDLoc of 'xor' overwrites SDLoc of 'setcc' when they are folded. This patch addresses this issue.
Reviewers: atrick, bogner, andreadb, craig.topper, aprantl
Reviewed By: andreadb
Subscribers: jlebar, mkuper, jholewinski, andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D29813
llvm-svn: 296825
This commit also relied on r296812, which I just reverted. We should probably
apply it again, after the r296812 has been discussed and been reapplied in some
variant.
llvm-svn: 296820
In ARMPreAllocLoadStoreOpt::RescheduleOps, LastOp should be the last
operation which we want to merge. If we break out of the loop because
an operation has the wrong offset, we shouldn't use that operation
as LastOp.
This patch fixes some cases where we would move stores to the wrong
insert point.
Re-commit with a fix to increment NumMove in the right place.
Differential Revision: https://reviews.llvm.org/D30124
llvm-svn: 296815
This was a list that I've had kicking around for a while, and would
add to whenever some hallway conversation would bring up another good
idea. It's not doing any good on my desktop, but it might generate
some inspiration here. Please add to this if you have any other
good ideas.
I apologize for the formatting, but if I wait to get it looking
nice it would probably stay on my desktop.
llvm-svn: 296814
and also "clang-format GenericDomTreeConstruction.h, since the current
formatting makes it look like their is a bug in the loop indentation, and there
is not"
This reverts commit r296535.
There are still some open design questions which I would like to discuss. I
revert this for Daniel (who gave the OK), as he is on vacation.
llvm-svn: 296812
This patch fixes pr32063.
Current code in PPCTargetLowering::PerformDAGCombine can transform
bswap
store
into a single PPCISD::STBRX instruction. but it doesn't consider the case that the operand size of bswap may be larger than store size. When it occurs, we need 2 modifications,
1 For the last operand of PPCISD::STBRX, we should not use DAG.getValueType(N->getOperand(1).getValueType()), instead we should use cast<StoreSDNode>(N)->getMemoryVT().
2 Before PPCISD::STBRX, we need to shift the original operand of bswap to the right side.
Differential Revision: https://reviews.llvm.org/D30362
llvm-svn: 296811
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
This patch extends the current functionality of the AArch64 redundant copy
elimination pass to handle non-zero cases such as:
BB#0:
cmp x0, #1
b.eq .LBB0_1
.LBB0_1:
orr x0, xzr, #0x1 ; <-- redundant copy; x0 known to hold #1.
Differential Revision: https://reviews.llvm.org/D29344
llvm-svn: 296809
This patch adds support for struct return values to the MSP430
target backend. It also reverses the order of argument and return
registers in the calling convention to bring it into closer
alignment with the published EABI from TI.
Patch by Andrew Wygle (awygle).
Differential Revision: https://reviews.llvm.org/D29069
llvm-svn: 296807
Zachary Turner