<rdar://problem/13594769>
Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging
The plug-in interface changes:
Modified the lldb_private::PluginInterface class that all plug-ins inherit from:
Changed:
virtual const char * GetPluginName() = 0;
To:
virtual ConstString GetPluginName() = 0;
Removed:
virtual const char * GetShortPluginName() = 0;
- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.
llvm-svn: 181631
This re-submission of this patch fixes a problem where the code sometimes caused a deadlock. The Process::SetPrivateState method was locking the Process::m_private_state variable and then later calling ThreadList::DidStop, which locks the ThreadList mutex. Other methods in ThreadList which were being called from other threads lock the ThreadList mutex and then call Process::GetPrivateState which locks the Process::m_private_state mutex. To avoid deadlocks, Process::SetPrivateState now locks the ThreadList mutex before locking the Process::m_private_state mutex.
llvm-svn: 181609
- Eliminated the use of static for methods that read m_register_infos, so that these routines can be implemented in the base class.
- Eliminated m_register_infos in the base class because this is not used when derived classes call UpdateRegisterInfo.
- Also moved the namespace using declarations from headers to source files.
Thanks to Daniel and Samuel for their review feedback.
llvm-svn: 181538
Recursive commands invocations are not currently supported by our CommandInterpreter
CommandScriptImport can actually be made to invoke itself recursively, so we need to work around that by clearing the m_exe_ctx
This is a short-term workaround, a more interesting solution would be to actually make sure recursive command invocations work properly
llvm-svn: 181537
namespace lldb_private {
class Thread
{
virtual lldb::StopInfoSP
GetPrivateStopReason() = 0;
};
}
To not be virtual. The lldb_private::Thread now handles the correct caching and will call a new pure virtual function:
namespace lldb_private {
class Thread
{
virtual bool
CalculateStopInfo() = 0;
}
}
This function must be overridden by thead lldb_private::Thread subclass and the only thing it needs to do is to set the Thread::StopInfo() with the current stop reason and return true, or return false if there is no stop reason. The lldb_private::Thread class will take care of calling this function only when it is required. This allows lldb_private::Thread subclasses to be a bit simpler and not all need to duplicate the cache and invalidation settings.
Also renamed:
lldb::StopInfoSP
lldb_private::Thread::GetPrivateStopReason();
To:
lldb::StopInfoSP
lldb_private::Thread::GetPrivateStopInfo();
Also cleaned up a case where the ThreadPlanStepOverBreakpoint might not re-set its breakpoint if the thread disappears (which was happening due to a bug when using the OperatingSystem plug-ins with memory threads and real threads).
llvm-svn: 181501
to the DeclContext. This fulfils the contract that
we make with Clang by returning ELR_AlreadyLoaded.
This is a little aggressive in that it does not allow
the ASTImporter to import the child decls with any
lexical parent other than the Decl that reported them
as children.
<rdar://problem/13517713>
llvm-svn: 181498
This commit changes the ${function.name-with-args} prompt keyword to also tackle structs
Previously, since aggregates have no values, this would show up as foo=(null)
This checkin changes that to instead print foo=(Foo at 0x123) (i.e. typename at address)
There are other potential choices here (summary, one-liner printout of all members, ...) and I would love to hear feedback about better options, if any
llvm-svn: 181462
- Played with the current dual run lock implementation for a few days, noticed
no regressions, so enabling in trunk so we see if any problems are detected
by buildbots.
llvm-svn: 181446
- verify that backtraces for stacks that include functions which contain
illegal instructions are correct, and that variables in said functions can be
printed.
llvm-svn: 181442
value. This fixes problems, for instance, with the StepRange plans, where they know that
they explained the stop because they were at their "run to here" breakpoint, then deleted
that breakpoint, so when they got asked again, doh! I had done this for a couple of plans
in an ad hoc fashion, this just formalizes it.
Also add a "ResumeRequested" in Process so that the code in the completion handlers can
tell the ShouldStop logic they want to resume rather than just directly resuming. That allows
us to handle resuming in a more controlled fashion.
Also, SetPublicState can take a "restarted" flag, so that it doesn't drop the run lock when
the target was immediately restarted.
--This line, and those below , will be ignored--
M test/lang/objc/objc-dynamic-value/TestObjCDynamicValue.py
M include/lldb/Target/ThreadList.h
M include/lldb/Target/ThreadPlanStepOut.h
M include/lldb/Target/Thread.h
M include/lldb/Target/ThreadPlanBase.h
M include/lldb/Target/ThreadPlanStepThrough.h
M include/lldb/Target/ThreadPlanStepInstruction.h
M include/lldb/Target/ThreadPlanStepInRange.h
M include/lldb/Target/ThreadPlanStepOverBreakpoint.h
M include/lldb/Target/ThreadPlanStepUntil.h
M include/lldb/Target/StopInfo.h
M include/lldb/Target/Process.h
M include/lldb/Target/ThreadPlanRunToAddress.h
M include/lldb/Target/ThreadPlan.h
M include/lldb/Target/ThreadPlanCallFunction.h
M include/lldb/Target/ThreadPlanStepOverRange.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
M source/Target/StopInfo.cpp
M source/Target/Process.cpp
M source/Target/ThreadPlanRunToAddress.cpp
M source/Target/ThreadPlan.cpp
M source/Target/ThreadPlanCallFunction.cpp
M source/Target/ThreadPlanStepOverRange.cpp
M source/Target/ThreadList.cpp
M source/Target/ThreadPlanStepOut.cpp
M source/Target/Thread.cpp
M source/Target/ThreadPlanBase.cpp
M source/Target/ThreadPlanStepThrough.cpp
M source/Target/ThreadPlanStepInstruction.cpp
M source/Target/ThreadPlanStepInRange.cpp
M source/Target/ThreadPlanStepOverBreakpoint.cpp
M source/Target/ThreadPlanStepUntil.cpp
M lldb.xcodeproj/xcshareddata/xcschemes/Run Testsuite.xcscheme
llvm-svn: 181381
a new section is added to the executable after the dSYM has been created, e.g.
the CTF segment added to mach_kernel after all other linking and processing has
been finished.
<rdar://problem/13258780>
llvm-svn: 181375
This module uses Python's sys.settrace() mechanism so setup a hook that can log every significant operation
This is a first step in providing a good debugging experience of Python embedded in LLDB
This module comprises an OO infrastructure that wraps Python's tracing and inspecting mechanisms, plus a very simple logging tracer
Output from this tracer looks like:
call print_keyword_args from <module> @ 243 args are kwargs are {'first_name': 'John', 'last_name': 'Doe'}
running print_keyword_args @ 228 locals are {'kwargs': {'first_name': 'John', 'last_name': 'Doe'}}
running print_keyword_args @ 229 locals are {'key': 'first_name', 'value': 'John', 'kwargs': {'first_name': 'John', 'last_name': 'Doe'}}
first_name = John
running print_keyword_args @ 228 locals are {'key': 'first_name', 'value': 'John', 'kwargs': {'first_name': 'John', 'last_name': 'Doe'}}
running print_keyword_args @ 229 locals are {'key': 'last_name', 'value': 'Doe', 'kwargs': {'first_name': 'John', 'last_name': 'Doe'}}
last_name = Doe
running print_keyword_args @ 228 locals are {'key': 'last_name', 'value': 'Doe', 'kwargs': {'first_name': 'John', 'last_name': 'Doe'}}
return from print_keyword_args value is None locals are {'key': 'last_name', 'value': 'Doe', 'kwargs': {'first_name': 'John', 'last_name': 'Doe'}}
llvm-svn: 181343
while we develop a better understanding of how to manage the thread lists in a platform-independant fashion.
Reviewed by: Daniel Malea
llvm-svn: 181323
If the user pressed ^D, that would bypass the exit confirmation mechanism
This checkin remedies that by making sure that users get prompted on exit when appropriate even if they use CTRL+D instead of typing quit at the prompt
llvm-svn: 181257
Matt Kopec