These instructions weren't in the initial version of MMX, but
were added when SSE1 was introduced. We already have the intrinsic
named correctly to include sse and the frontened header enforces
sse. We have one place in the backend where we DAG combine to
this intrinsic, but that's also qualified. So don't know of anything
currently broken unless someone writes their own IR and doesn't
set the sse feature.
We already had a DAG combine for (mmx (bitconvert (i64 (extractelement v2i64))))
to MOVDQ2Q.
Remove patterns for MMX_MOVQ2DQrr/MMX_MOVDQ2Qrr that use
scalar_to_vector/extractelement involving i64 scalar type with
v2i64 and x86mmx.
Only 64-bit bits will be loaded, not the whole 128 bits. We can
just combine it to plain mmx load. This has the side effect of
enabling isel load folding for it.
This part of my desire to get rid of isel patterns that shrink loads.
This allows us to use timm in the isel table which is more
consistent with other intrinsics that take an immediate now.
We can't declare the intrinsic as taking an ImmArg because we
need to match non-constants to the shift by MMX register
instruction which we do by mutating the intrinsic id during
lowering.
llvm-svn: 372537
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
We already had the pattern for just the scalar to vector and bitcast,
but not the case where we wanted zeroes in the high half of the xmm.
llvm-svn: 368972
fp_to_sint is turned into X86cvttp2si during isel preprocessing.
The other redundant isel patterns were removed previously, but I
missed this one because its in the MMX td file.
llvm-svn: 368968
We now print ST0 as 'st' when generating the clobber list for MS inline assembly in clang. This matches what the gcc reg name list expects.
Original commit message:
This fixes the test case in PR35982 by preventing MMX instructions that read MM0-7 from being moved below EMMS/FEMMS by the post RA scheduler.
Though as discussed in bugzilla, this is not a complete fix. There is still the possibility of reordering in IR or by the pre-RA scheduler.
Differential Revision: https://reviews.llvm.org/D57298
llvm-svn: 353016
This fixes the test case in PR35982 by preventing MMX instructions that read MM0-7 from being moved below EMMS/FEMMS by the post RA scheduler.
Though as discussed in bugzilla, this is not a complete fix. There is still the possibility of reordering in IR or by the pre-RA scheduler.
Differential Revision: https://reviews.llvm.org/D57298
llvm-svn: 352660
This patch adds a new ReadAdvance definition named ReadInt2Fpu.
ReadInt2Fpu allows x86 scheduling models to accurately describe delays caused by
data transfers from the integer unit to the floating point unit.
ReadInt2Fpu currently defaults to a delay of zero cycles (i.e. no delay) for all
x86 models excluding BtVer2. That means, this patch is only a functional change
for the Jaguar cpu model only.
Tablegen definitions for instructions (V)PINSR* have been updated to account for
the new ReadInt2Fpu. That read is mapped to the the GPR input operand.
On Jaguar, int-to-fpu transfers are modeled as a +6cy delay. Before this patch,
that extra delay was added to the opcode latency. In practice, the insert opcode
only executes for 1cy. Most of the actual latency is actually contributed by the
so-called operand-latency. According to the AMD SOG for family 16h, (V)PINSR*
latency is defined by expression f+1, where f is defined as a forwarding delay
from the integer unit to the fpu.
When printing instruction latency from MCA (see InstructionInfoView.cpp) and LLC
(only when flag -print-schedule is speified), we now need to account for any
extra forwarding delays. We do this by checking if scheduling classes declare
any negative ReadAdvance entries. Quoting a code comment in TargetSchedule.td:
"A negative advance effectively increases latency, which may be used for
cross-domain stalls". When computing the instruction latency for the purpose of
our scheduling tests, we now add any extra delay to the formula. This avoids
regressing existing codegen and mca schedule tests. It comes with the cost of an
extra (but very simple) hook in MCSchedModel.
Differential Revision: https://reviews.llvm.org/D57056
llvm-svn: 351965
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Currently we hardcode instructions with ReadAfterLd if the register operands don't need to be available until the folded load has completed. This doesn't take into account the different load latencies of different memory operands (PR36957).
This patch adds a ReadAfterFold def into X86FoldableSchedWrite to replace ReadAfterLd, allowing us to specify the load latency at a scheduler class level.
I've added ReadAfterVec*Ld classes that match the XMM/Scl, XMM and YMM/ZMM WriteVecLoad classes that we currently use, we can tweak these values in future patches once this infrastructure is in place.
Differential Revision: https://reviews.llvm.org/D52886
llvm-svn: 343868
Some added 20 and some added 15. Its unclear when to use which value and whether they are required at all.
This patch removes them all. If we start finding real world issues we may need to add them back with proper tests.
llvm-svn: 336735
We already have these aliases for EVEX enocded instructions, but not for the GPR, MMX, SSE, and VEX versions.
Also remove the vpextrw.s EVEX alias. That's not something gas implements.
llvm-svn: 334922
Summary:
The tests in:
https://bugs.llvm.org/show_bug.cgi?id=37751
...show miscompiles because we wrongly mapped and folded x86-specific intrinsics into generic DAG nodes.
This patch corrects the mappings in X86IntrinsicsInfo.h and adds isel matching corresponding to the new patterns. The complete tests for the failure cases should be in avx-cvttp2si.ll and sse-cvttp2si.ll and avx512-cvttp2i.ll
Reviewers: RKSimon, gbedwell, spatel
Reviewed By: spatel
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D47993
llvm-svn: 334685
Passing -mattr=-mmx needs to disable these instructions since the MMX register class won't have been set up. But we don't want -mattr=-mmx to disable SSE so we have to do it separately.
llvm-svn: 333984
This property is needed in order to follow values movement between
registers. This property is used in TII to implement method that
returns true if simple copy like instruction is recognized, along
with source and destination machine operands.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D45204
llvm-svn: 333093
BtVer2 - fix NumMicroOp and account for the Lat+6cy GPR->XMM and Lat+1cy XMm->GPR delays (see rL332737)
The high number of MOVD/MOVQ equivalent instructions meant that there were a number of missed patterns in SNB/Znver1:
SNB - add missing GPR<->MMX costs (taken from Agner / Intel AOM)
Znver1 - add missing GPR<->XMM MOVQ costs (taken from Agner)
llvm-svn: 332745
Retag some instructions that were missed when we split off vector load/store/moves - MOVQ/MOVD etc.
Fixes BtVer2/SLM which have different behaviours for GPR stores.
llvm-svn: 332718
A lot of the models still have too many InstRW overrides for these new classes - this needs cleaning up but I wanted to get the classes in first
llvm-svn: 332451
This took a bit of extra work as on Intel targets the old (V)PSLLDrr/(V)PSLLDrm style instructions act differently - I ended up creating WriteVecShiftImm classes for XMM/YMM/ZMM vector shift by immediate and retaining WriteVecShift as the default (used only by MMX) plus WriteVecShiftX/WriteVecShiftY. X86SchedWriteWidths hides most of this thank goodness.
llvm-svn: 331472
Split off pinsr/pextr and extractps instructions.
(Mostly) fixes PR36887.
Note: It might be worth adding a WriteFInsertLd class as well in the future.
Differential Revision: https://reviews.llvm.org/D45929
llvm-svn: 330714
Currently MOVMSK instructions use the WriteVecLogic class, which is a very poor choice given that MOVMSK involves a SSE->GPR transfer.
Differential Revision: https://reviews.llvm.org/D44924
llvm-svn: 328664
Craig Topper