See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
This is D77454, except for stores. All the infrastructure work was done
for loads, so the remaining changes necessary are relatively small.
Differential Revision: https://reviews.llvm.org/D79968
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
Summary:
If the only use of a value is a start or end lifetime intrinsic then mark the intrinsic as trivially dead. This should allow for that value to then be removed as well.
Currently, this only works for allocas, globals, and arguments.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79355
Summary:
If the only use of a value is a start or end lifetime intrinsic then mark the intrinsic as trivially dead. This should allow for that value to then be removed as well.
Currently, this only works for allocas, globals, and arguments.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79355
Using the existing NumFastStores statistic can be misleading when
comparing the impact of DSE patches.
For example, consider the case where a store gets removed from a
function before it is inlined into another function. A less
powerful DSE might only remove the store from functions it has
been inlined into, which will result in more stores being removed, but
no difference in the actual number of stores after DSE.
The new stat provides the absolute number of stores surviving after
DSE.
Reviewers: dmgreen, bryant, asbirlea, jfb
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D78830
We can eliminate MemoryDefs of objects not accessible after the function
returns (e.g. alloca), if there are no reads between the MemoryDef and
any function exits. We can stop traversing paths that completely
overwrite the memory location of the MemoryDef.
This patch was split off D73763.
Reviewers: dmgreen, bryant, asbirlea, Tyker, efriedma, george.burgess.iv
Reviewed By: asbirlea, george.burgess.iv
Differential Revision: https://reviews.llvm.org/D77736
Aligned_alloc is a standard lib function and has been in glibc since
2.16 and in the C11 standard. It has semantics similar to malloc/calloc
for several analyses/transforms. This patch introduces aligned_alloc
in target library info and memory builtins. Subsequent ones will
make other passes aware and fix https://bugs.llvm.org/show_bug.cgi?id=44062
This change will also be useful to LLVM generators that need to allocate
buffers of vector elements larger than 16 bytes (for eg. 256-bit ones),
element boundary alignment for which is not typically provided by glibc malloc.
Signed-off-by: Uday Bondhugula <uday@polymagelabs.com>
Differential Revision: https://reviews.llvm.org/D76970
For MemoryPhis, we have to avoid that the MemoryPhi may be executed
before before the access we are currently looking at.
To do this we do a post-order numbering of the basic blocks in the
function and bail out once we reach a MemoryPhi with a larger (or equal)
post-order block number than the current MemoryAccess.
This changes the order in which we visit stores for elimination.
This patch also adds support for exploring multiple paths. We keep a worklist (ToCheck) of memory accesses that might be eliminated by our starting MemoryDef or MemoryPhis for further exploration. For MemoryPhis, we add the incoming values to the worklist, for MemoryDefs we add the defining access.
Reviewers: dmgreen, rnk, efriedma, bryant, asbirlea
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D72148
DSE would mistakenly remove store (2):
a = calloc(n+1)
for (int i = 0; i < n; i++) {
store 1, a[i+1] // (1)
store 0, a[i] // (2)
}
The fix is to do PHI transaltion while looking for clobbering
instructions between the store and the calloc.
Reviewed By: efriedma, bjope
Differential Revision: https://reviews.llvm.org/D68006
Add a map from BasicBlocks to overlap intervals. For partial writes, we
can keep track of those in IOLs. We only add candidates that are valid
for eliminations.
Reviewers: dmgreen, bryant, asbirlea, Tyker
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D73757
Can be used like
-debug-counter=dse-memoryssa-skip=10,dse-memoryssa-counter-count=20
Reviewers: dmgreen, rnk, efriedma, bryant, asbirlea
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D72147
This reverts commit d0c4d4fe09.
Revert "[DSE,MSSA] Move more passing test cases from todo to simple.ll."
This reverts commit 02266e64bb.
Revert "[DSE,MSSA] Adjust mda-with-dbg-values.ll to MSSA backed DSE."
This reverts commit 74f03e4ff0.
This patch adds a first version of a MemorySSA based DSE. It is missing
a lot of features, which will get added as follow-ups, to help to keep
the review manageable.
The patch uses the following general approach: given a MemoryDef, walk
upwards to find clobbering MemoryDefs that may be killed by the
starting def. Then check that there are no uses that may read the
location of the original MemoryDef in between both MemoryDefs. A bit
more concretely:
For all MemoryDefs StartDef:
1. Get the next dominating clobbering MemoryDef (DomAccess) by walking upwards.
2. Check that there no reads between DomAccess and the StartDef by checking
all uses starting at DomAccess and walking until we see StartDef.
3. For each found DomDef, check that:
1. There are no barrier instructions between DomDef and StartDef (like
throws or stores with ordering constraints).
2. StartDef is executed whenever DomDef is executed.
3. StartDef completely overwrites DomDef.
4. Erase DomDef from the function and MemorySSA.
The patch uses a very simple approach to guarantee that no throwing
instructions are between 2 stores: We only allow accesses to stack
objects, access that are in the same basic block if the block does not
contain any throwing instructions or accesses in functions that do
not contain any throwing instructions. This will get lifted later.
Besides adding support for the missing cases, there is plenty of additional
potential for improvements as follow-up work, e.g. the way we visit stores
(could be just a traversal of the MemorySSA, rather than collecting them
up-front), using the alias information discovered during walking to optimize
the MemorySSA.
This is loosely based on D40480 by Dave Green.
Reviewers: dmgreen, rnk, efriedma, bryant, asbirlea, Tyker
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D72700
This copies the DSE tests into a MSSA subdirectory to test the MemorySSA
backed DSE implementation, without disturbing the original tests.
Differential Revision: https://reviews.llvm.org/D72145
llvm.memset intrinsics do only write memory, but are missing
IntrWriteMem, so they doesNotReadMemory() returns false for them.
The test change is due to the test checking the fn attribute ids at the
call sites, which got bumped up due to a new combination with writeonly
appearing in the test file.
Reviewers: jdoerfert, reames, efriedma, nlopes, lebedev.ri
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D72789
The patch makes sure that the LastThrowing pointer does not point to any instruction deleted by call to DeleteDeadInstruction.
While iterating through the instructions the pass maintains a pointer to the lastThrowing Instruction. A call to deleteDeadInstruction deletes a dead store and other instructions feeding the original dead instruction which also become dead. The instruction pointed by the lastThrowing pointer could also be deleted by the call to DeleteDeadInstruction and thus it becomes a dangling pointer. Because of this, we see an error in the next iteration.
In the patch, we maintain a list of throwing instructions encountered previously and use the last non deleted throwing instruction from the container.
Reviewers: fhahn, bcahoon, efriedma
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D65326
The patch makes sure that the LastThrowing pointer does not point to any instruction deleted by call to DeleteDeadInstruction.
While iterating through the instructions the pass maintains a pointer to the lastThrowing Instruction. A call to deleteDeadInstruction deletes a dead store and other instructions feeding the original dead instruction which also become dead. The instruction pointed by the lastThrowing pointer could also be deleted by the call to DeleteDeadInstruction and thus it becomes a dangling pointer. Because of this, we see an error in the next iteration.
In the patch, we maintain a list of throwing instructions encountered previously and use the last non deleted throwing instruction from the container.
Patch by Ankit <quic_aankit@quicinc.com>
Reviewers: fhahn, bcahoon, efriedma
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D65326
Summary:
In D62801, new function attribute `willreturn` was introduced. In short, a function with `willreturn` is guaranteed to come back to the call site(more precise definition is in LangRef).
In this patch, willreturn is annotated for LLVM intrinsics.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: jvesely, nhaehnle, sstefan1, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64904
llvm-svn: 367184
Summary:
The DeadStoreElimination pass now skips doing
PartialStoreMerging when stores overlap according to
OW_PartialEarlierWithFullLater and at least one of
the stores is having a store size that is different
from the size of the type being stored.
This solves problems seen in
https://bugs.llvm.org/show_bug.cgi?id=41949
for which we in the past could end up with
mis-compiles or assertions.
The content and location of the padding bits is not
formally described (or undefined) in the LangRef
at the moment. So the solution is chosen based on
that we cannot assume anything about the padding bits
when having a store that clobbers more memory than
indicated by the type of the value that is stored
(such as storing an i6 using an 8-bit store instruction).
Fixes: https://bugs.llvm.org/show_bug.cgi?id=41949
Reviewers: spatel, efriedma, fhahn
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62250
llvm-svn: 361605
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
Bug: https://bugs.llvm.org/show_bug.cgi?id=41175
In the bug test case the DSE pass is shortening the range of memory that a
memset is working on. A getelementptr is generated so that the new
starting address can be passed to memset. This instruction was not given
a DebugLoc.
To fix the bug, copy the DebugLoc from the memset instruction.
Patch by Orlando Cazalet-Hyams!
Differential Revision: https://reviews.llvm.org/D60556
llvm-svn: 358270
IntrArgMemOnly implies that only memory pointed to by pointer typed arguments will be accessed. But these intrinsics allow you to pass null to the pointer argument and put the full address into the index argument. Other passes won't be able to understand this.
A colleague found that ISPC was creating gathers like this and then dead store elimination removed some stores because it didn't understand what the gather was doing since the pointer argument was null.
Differential Revision: https://reviews.llvm.org/D58805
llvm-svn: 355228
Salvaging a redundant load instruction into a debug expression hides a
memory read from optimisation passes. Passes that alter memory behaviour
(such as LICM promoting memory to a register) aren't aware of these debug
memory reads and leave them unaltered, making the debug variable location
point somewhere unsafe.
Teaching passes to know about these debug memory reads would be challenging
and probably incomplete. Finding dbg.value instructions that need to be fixed
would likely be computationally expensive too, as more analysis would be
required. It's better to not generate debug-memory-reads instead, alas.
Changed tests:
* DeadStoreElim: test for salvaging of intermediate operations contributing
to the dead store, instead of salvaging of the redundant load,
* GVN: remove debuginfo behaviour checks completely, this behaviour is still
covered by other tests,
* InstCombine: don't test for salvaged loads, we're removing that behaviour.
Differential Revision: https://reviews.llvm.org/D57962
llvm-svn: 353824
Summary:
Calls marked 'tail' cannot read or write allocas from the current frame
because the current frame might be destroyed by the time they run.
However, a tail call may use an alloca with byval. Calling with byval
copies the contents of the alloca into argument registers or stack
slots, so there is no lifetime issue. Tail calls never modify allocas,
so we can return just ModRefInfo::Ref.
Fixes PR38466, a longstanding bug.
Reviewers: hfinkel, nlewycky, gbiv, george.burgess.iv
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D50679
llvm-svn: 339636
Summary:
This patch introduce new intrinsic -
strip.invariant.group that was described in the
RFC: Devirtualization v2
Reviewers: rsmith, hfinkel, nlopes, sanjoy, amharc, kuhar
Subscribers: arsenm, nhaehnle, JDevlieghere, hiraditya, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47103
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
llvm-svn: 336073
Before this patch, debugify would insert debug value intrinsics before the
terminating instruction in a block. This had the advantage of being simple,
but was a bit too simple/unrealistic.
This patch teaches debugify to insert debug values immediately after their
operand defs. This enables better testing of the compiler.
For example, with this patch, `opt -debugify-each` is able to identify a
vectorizer DI-invariance bug fixed in llvm.org/PR32761. In this bug, the
vectorizer produced different output with/without debug info present.
Reverting Davide's bugfix locally, I see:
$ ~/scripts/opt-check-dbg-invar.sh ./bin/opt \
.../SLPVectorizer/AArch64/spillcost-di.ll -slp-vectorizer
Comparing: -slp-vectorizer .../SLPVectorizer/AArch64/spillcost-di.ll
Baseline: /var/folders/j8/t4w0bp8j6x1g6fpghkcb4sjm0000gp/T/tmp.iYYeL1kf
With DI : /var/folders/j8/t4w0bp8j6x1g6fpghkcb4sjm0000gp/T/tmp.sQtQSeet
9,11c9,11
< %5 = getelementptr inbounds %0, %0* %2, i64 %0, i32 1
< %6 = bitcast i64* %4 to <2 x i64>*
< %7 = load <2 x i64>, <2 x i64>* %6, align 8, !tbaa !0
---
> %5 = load i64, i64* %4, align 8, !tbaa !0
> %6 = getelementptr inbounds %0, %0* %2, i64 %0, i32 1
> %7 = load i64, i64* %6, align 8, !tbaa !5
12a13
> store i64 %5, i64* %8, align 8, !tbaa !0
14,15c15
< %10 = bitcast i64* %8 to <2 x i64>*
< store <2 x i64> %7, <2 x i64>* %10, align 8, !tbaa !0
---
> store i64 %7, i64* %9, align 8, !tbaa !5
:: Found a test case ^
Running this over the *.ll files in tree, I found four additional examples
which compile differently with/without DI present. I plan on filing bugs for
these.
llvm-svn: 334118
Setting the "Debug Info Version" module flag makes it possible to pipe
synthetic debug info into llc, which is useful for testing backends.
llvm-svn: 333237
Summary:
This change teaches DSE that the atomic memory intrinsics can be overwriten
partially in the same way as the non-atomic forms. Specifically, that the
atomic memcpy & memset can be shortened at the end and that the atomic memset
can be shortened at the beginning, if they partially overwritten
by later stores.
Reviewers: mkazantsev, skatkov, apilipenko, efriedma, rsmith, spatel, filcab, sanjoy
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45584
llvm-svn: 331991
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
zoecarver